open-consul/proto/private/pbsubscribe/subscribe.proto

/*
   Package event provides a service for subscribing to state change events.
*/
syntax = "proto3";

// TODO: ideally we would have prefixed this package as
// "hashicorp.consul.internal.subscribe" before releasing but now correcting this will
// require a grpc passthrough service shim since the package name is part of
// the rpc method dispatch and editing it naively would break backwards
// compatibility.
package subscribe;

import "annotations/ratelimit/ratelimit.proto";
import "private/pbcommon/common.proto";
import "private/pbconfigentry/config_entry.proto";
import "private/pbservice/node.proto";

// StateChangeSubscription service allows consumers to subscribe to topics of
// state change events. Events are streamed as they happen.
// buf:lint:ignore SERVICE_SUFFIX
service StateChangeSubscription {
  // Subscribe to a topic to receive events when there are changes to the topic.
  //
  // If SubscribeRequest.Index is 0 the event stream will start with one or
  // more snapshot events, followed by an EndOfSnapshot event. Subsequent
  // events will be a live stream of events as they happen.
  //
  // If SubscribeRequest.Index is > 0 it is assumed the client already has a
  // snapshot, and is trying to resume a stream that was disconnected. The
  // client will either receive a NewSnapshotToFollow event, indicating the
  // client view is stale and it must reset its view and prepare for a new
  // snapshot. Or, if no NewSnapshotToFollow event is received, the client
  // view is still fresh, and all events will be the live stream.
  //
  // Subscribe may return a gRPC status error with codes.ABORTED to indicate
  // the client view is now stale due to a change on the server. The client
  // must reset its view and issue a new Subscribe call to restart the stream.
  // This error is used when the server can no longer correctly maintain the
  // stream, for example because the ACL permissions for the token changed, or
  // because the server state was restored from a snapshot.
  // buf:lint:ignore RPC_RESPONSE_STANDARD_NAME
  rpc Subscribe(SubscribeRequest) returns (stream Event) {
    option (hashicorp.consul.internal.ratelimit.spec) = {
      operation_type: OPERATION_TYPE_READ,
      operation_category: OPERATION_CATEGORY_SUBSCRIBE
    };
  }
}

// Topic enumerates the supported event topics.
enum Topic {
  Unknown = 0;

  // ServiceHealth topic contains events for any changes to service health.
  ServiceHealth = 1;

  // ServiceHealthConnect topic contains events for any changes to service
  // health for connect-enabled services.
  ServiceHealthConnect = 2;

  // MeshConfig topic contains events for changes to the global mesh config.
  MeshConfig = 3;

  // ServiceResolver topic contains events for changes to a service resolver.
  ServiceResolver = 4;

  // IngressGateway topic contains events for changes to an ingress gateway.
  IngressGateway = 5;

  // ServiceIntentions topic contains events for changes to service intentions.
  ServiceIntentions = 6;

  // ServiceList topic contains events about services (not service instances)
  // getting registered/deregistered. It can be used to materialize a list of
  // the services in the given datacenter.
  //
  // Note: WildcardSubject is the only supported Subject on this topic.
  ServiceList = 7;

  // ServiceDefaults topic contains events for changes to service-defaults.
  ServiceDefaults = 8;

  // APIGateway topic contains events for changes to api-gateways.
  APIGateway = 9;

  // TCPRoute topic contains events for changes to tcp-routes.
  TCPRoute = 10;

  // HTTPRoute topic contains events for changes to http-routes.
  HTTPRoute = 11;

  // InlineCertificate topic contains events for changes to inline-certificates.
  InlineCertificate = 12;

  // BoundAPIGateway topic contains events for changes to bound-api-gateways.
  BoundAPIGateway = 13;

  // IPRateLimit topic contains events for changes to control-plane-request-limit
  IPRateLimit = 14;
}

message NamedSubject {
  // Key is a topic-specific identifier that restricts the scope of the
  // subscription to only events pertaining to that identifier. For example,
  // to receive events for a single service, the service's name is specified
  // as the key.
  string Key = 1;

  // Namespace which contains the resources. If Namespace is not specified the
  // default namespace will be used.
  //
  // Namespace is an enterprise-only feature.
  string Namespace = 2;

  // Partition which contains the resources. If Partition is not specified the
  // default partition will be used.
  //
  // Partition is an enterprise-only feature.
  string Partition = 3;

  // PeerName is the name of the peer that the requested service was imported from.
  string PeerName = 4;
}

// SubscribeRequest used to subscribe to a topic.
message SubscribeRequest {
  // Topic identifies the set of events the subscriber is interested in.
  Topic Topic = 1;

  // Deprecated: use NamedSubject.Key instead.
  string Key = 2;

  // Token is the ACL token to authenticate the request. The token must have
  // sufficient privileges to read the requested information otherwise events
  // will be filtered, possibly resulting in an empty snapshot and no further
  // updates sent.
  string Token = 3;

  // Index is the raft index the subscriber has already observed up to. This
  // is zero on an initial streaming call, but then can be provided by a
  // client on subsequent re-connections such that the full snapshot doesn't
  // need to be resent if the client is up to date.
  uint64 Index = 4;

  // Datacenter specifies the Consul datacenter the request is targeted at.
  // If it's not the local DC the server will forward the request to
  // the remote DC and proxy the results back  to the subscriber. An empty
  // string defaults to the local datacenter.
  string Datacenter = 5;

  // Deprecated: use NamedSubject.Namespace instead.
  string Namespace = 6;

  // Deprecated: use NamedSubject.Partition instead.
  string Partition = 7;

  // Deprecated: use NamedSubject.PeerName instead.
  string PeerName = 8;

  // Subject identifies a portion of a topic for which the subscriber wishes to
  // receive events (e.g. health events for a particular service).
  oneof Subject {
    // WildcardSubject is used to subscribe to all events published on the topic
    // if it is supported.
    bool WildcardSubject = 9;

    // NamedSubject is used to subscribe to events pertaining to a specific
    // resource (e.g. a particular service or config entry).
    NamedSubject NamedSubject = 10;
  }
}

// Event describes a streaming update on a subscription. Events are used both to
// describe the current "snapshot" of the result as well as ongoing mutations to
// that snapshot.
message Event {
  // Index is the raft index at which the mutation took place. At the top
  // level of a subscription there will always be at most one Event per index.
  // If multiple events are published to the same topic in a single raft
  // transaction then the batch of events will be encoded inside a single
  // top-level event to ensure they are delivered atomically to clients.
  uint64 Index = 1;

  // Payload is the actual event content.
  oneof Payload {
    // EndOfSnapshot indicates the event stream for the initial snapshot has
    // ended. Subsequent Events delivered will be mutations to that result.
    bool EndOfSnapshot = 2;

    // NewSnapshotToFollow indicates that the client view is stale. The client
    // must reset its view before handing any more events. Subsequent events
    // in the stream will be for a new snapshot until an EndOfSnapshot event
    // is received.
    bool NewSnapshotToFollow = 3;

    // EventBatch is a set of events. This is typically used as the payload
    // type where multiple events are emitted in a single topic and raft
    // index (e.g. transactional updates). In this case the Topic and Index
    // values of all events will match and the whole set should be delivered
    // and consumed atomically.
    EventBatch EventBatch = 4;

    // ServiceHealth is used for ServiceHealth and ServiceHealthConnect
    // topics.
    ServiceHealthUpdate ServiceHealth = 10;

    // ConfigEntry is used for config entry topics (e.g. MeshConfig).
    ConfigEntryUpdate ConfigEntry = 11;

    // Service is used for ServiceList topic.
    ServiceListUpdate Service = 12;
  }
}

message EventBatch {
  repeated Event Events = 1;
}

enum CatalogOp {
  Register = 0;
  Deregister = 1;
}

message ServiceHealthUpdate {
  CatalogOp Op = 1;
  hashicorp.consul.internal.service.CheckServiceNode CheckServiceNode = 2;
}

message ConfigEntryUpdate {
  enum UpdateOp {
    Upsert = 0;
    Delete = 1;
  }

  UpdateOp Op = 1;
  hashicorp.consul.internal.configentry.ConfigEntry ConfigEntry = 2;
}

message ServiceListUpdate {
  CatalogOp Op = 1;

  string Name = 2;
  hashicorp.consul.internal.common.EnterpriseMeta EnterpriseMeta = 3;
  string PeerName = 4;
}