luxolus
/
open-consul
2
0
Fork 0
Code Issues 1 Pull Requests Packages Releases Wiki Activity
open-consul/agent/config/testdata/full-config.json

924 lines
22 KiB
JSON
Raw Normal View History

config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
{
"acl_agent_master_token": "furuQD0b",
"acl_agent_token": "cOshLOQ2",
"acl_datacenter": "m3urck3z",
"acl_default_policy": "ArK3WIfE",
"acl_down_policy": "vZXMfMP0",
"acl_enable_key_list_policy": true,
"acl_master_token": "C1Q1oIwh",
"acl_replication_token": "LMmgy5dO",
"acl_token": "O1El0wan",
"acl_ttl": "18060s",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"acl": {
"enabled": true,
"down_policy": "03eb2aee",
"default_policy": "72c2e7a0",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"enable_key_list_policy": true,
"enable_token_persistence": true,
"policy_ttl": "1123s",
"role_ttl": "9876s",
"token_ttl": "3321s",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"enable_token_replication": true,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"msp_disable_bootstrap": true,
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"tokens": {
"master": "8a19ac27",
"initial_management": "3820e09a",
"agent_master": "64fd0e08",
"agent_recovery": "1dba6aba",
"replication": "5795983a",
"agent": "bed2377c",
"default": "418fdff1",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"managed_service_provider": [
{
"accessor_id": "first",
"secret_id": "fb0cee1f-2847-467c-99db-a897cff5fd4d"
},
{
"accessor_id": "second",
"secret_id": "1046c8da-e166-4667-897a-aefb343db9db"
}
]
}
},
"addresses": {
"dns": "93.95.95.81",
"http": "83.39.91.39",
"https": "95.17.17.19",
Add separate grpc_tls port. To ease the transition for users, the original gRPC port can still operate in a deprecated mode as either plain-text or TLS mode. This behavior should be removed in a future release whenever we no longer support this. The resulting behavior from this commit is: `ports.grpc > 0 && ports.grpc_tls > 0` spawns both plain-text and tls ports. `ports.grpc > 0 && grpc.tls == undefined` spawns a single plain-text port. `ports.grpc > 0 && grpc.tls != undefined` spawns a single tls port (backwards compat mode).
2022-08-19 17:07:22 +00:00
"grpc": "32.31.61.91",
"grpc_tls": "23.14.88.19"
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
"advertise_addr": "17.99.29.16",
"advertise_addr_wan": "78.63.37.19",
"advertise_reconnect_timeout": "0s",
"audit": {
Backport audit log config changes from enterprise
2021-05-06 21:09:18 +00:00
"enabled": true
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
"auto_config": {
"enabled": false,
"intro_token": "OpBPGRwt",
"intro_token_file": "gFvAXwI8",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"dns_sans": [
"6zdaWg9J"
],
"ip_sans": [
"198.18.99.99"
],
"server_addresses": [
"198.18.100.1"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"authorization": {
"enabled": true,
"static": {
"allow_reuse": true,
"claim_mappings": {
"node": "node"
},
"list_claim_mappings": {
"foo": "bar"
},
"bound_issuer": "consul",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"bound_audiences": [
"consul-cluster-1"
],
"claim_assertions": [
"value.node == \"${node}\""
],
"jwt_validation_pub_keys": [
"-----BEGIN PUBLIC KEY-----\nMFkwEwYHKoZIzj0CAQYIKoZIzj0DAQcDQgAERVchfCZng4mmdvQz1+sJHRN40snC\nYt8NjYOnbnScEXMkyoUmASr88gb7jaVAVt3RYASAbgBjB2Z+EUizWkx5Tg==\n-----END PUBLIC KEY-----"
]
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
}
}
},
"autopilot": {
"cleanup_dead_servers": true,
"disable_upgrade_migration": true,
"last_contact_threshold": "12705s",
"max_trailing_logs": 17849,
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"min_quorum": 3,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"redundancy_zone_tag": "3IsufDJf",
"server_stabilization_time": "23057s",
"upgrade_version_tag": "W9pDwFAL"
},
"bind_addr": "16.99.34.17",
"bootstrap_expect": 53,
"cache": {
"entry_fetch_max_burst": 42,
"entry_fetch_rate": 0.334
},
"use_streaming_backend": true,
"ca_file": "erA7T0PM",
"ca_path": "mQEN1Mfp",
"cert_file": "7s4QAzDk",
"check": {
"id": "fZaCAXww",
"name": "OOM2eo0f",
"notes": "zXzXI9Gt",
"service_id": "L8G0QNmR",
"token": "oo4BCTgJ",
"status": "qLykAl5u",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"args": [
"f3BemRjy",
"e5zgpef7"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"http": "29B93haH",
"header": {
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"hBq0zn1q": [
"2a9o9ZKP",
"vKwA5lR6"
],
"f3r6xFtM": [
"RyuIdDWv",
"QbxEcIUM"
]
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
"method": "Dou0nGT5",
"body": "5PBQd2OT",
Add a field to disable following redirects on http checks
2022-04-01 21:31:15 +00:00
"disable_redirects": true,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"output_max_size": 4096,
"tcp": "JY6fTTcw",
add http2 ping health checks (#8431) * add http2 ping checks * fix test issue * add h2ping check to config resources * add new test and docs for h2ping * fix grammatical inconsistency in H2PING documentation * resolve rebase conflicts, add test for h2ping tls verification failure * api documentation for h2ping * update test config data with H2PING * add H2PING to protocol buffers and update changelog * fix typo in changelog entry
2021-04-09 19:12:10 +00:00
"h2ping": "rQ8eyCSF",
change config option to H2PingUseTLS
2021-10-05 01:36:18 +00:00
"h2ping_use_tls": false,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"interval": "18714s",
"docker_container_id": "qF66POS9",
"shell": "sOnDy228",
feat: windows service health checks
2022-06-07 17:27:14 +00:00
"os_service": "aZaCAXww",
Add support for configuring TLS ServerName for health checks Some TLS servers require SNI, but the Golang HTTP client doesn't include it in the ClientHello when connecting to an IP address. This change adds a new TLSServerName field to health check definitions to optionally set it. This fixes #9473.
2021-02-25 06:35:34 +00:00
"tls_server_name": "7BdnzBYk",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tls_skip_verify": true,
"timeout": "5954s",
"deregister_critical_service_after": "13209s"
},
"checks": [
{
"id": "uAjE6m9Z",
"name": "QsZRGpYr",
"notes": "VJ7Sk4BY",
"service_id": "lSulPcyz",
"token": "toO59sh8",
"status": "9RlWsXMV",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"args": [
"4BAJttck",
"4D2NPtTQ"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"http": "dohLcyQ2",
"header": {
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"ZBfTin3L": [
"1sDbEqYG",
"lJGASsWK"
],
"Ui0nU99X": [
"LMccm3Qe",
"k5H5RggQ"
]
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
"method": "aldrIQ4l",
"body": "wSjTy7dg",
Add a field to disable following redirects on http checks
2022-04-01 21:31:15 +00:00
"disable_redirects": true,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tcp": "RJQND605",
add http2 ping health checks (#8431) * add http2 ping checks * fix test issue * add h2ping check to config resources * add new test and docs for h2ping * fix grammatical inconsistency in H2PING documentation * resolve rebase conflicts, add test for h2ping tls verification failure * api documentation for h2ping * update test config data with H2PING * add H2PING to protocol buffers and update changelog * fix typo in changelog entry
2021-04-09 19:12:10 +00:00
"h2ping": "9N1cSb5B",
change config option to H2PingUseTLS
2021-10-05 01:36:18 +00:00
"h2ping_use_tls": false,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"interval": "22164s",
"output_max_size": 4096,
"docker_container_id": "ipgdFtjd",
"shell": "qAeOYy0M",
feat: windows service health checks
2022-06-07 17:27:14 +00:00
"os_service": "aAjE6m9Z",
Add support for configuring TLS ServerName for health checks Some TLS servers require SNI, but the Golang HTTP client doesn't include it in the ClientHello when connecting to an IP address. This change adds a new TLSServerName field to health check definitions to optionally set it. This fixes #9473.
2021-02-25 06:35:34 +00:00
"tls_server_name": "bdeb5f6a",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tls_skip_verify": true,
"timeout": "1813s",
"deregister_critical_service_after": "14232s"
},
{
"id": "Cqq95BhP",
"name": "3qXpkS0i",
"notes": "sb5qLTex",
"service_id": "CmUUcRna",
"token": "a3nQzHuy",
"status": "irj26nf3",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"args": [
"9s526ogY",
"gSlOHj1w"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"http": "yzhgsQ7Y",
"header": {
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"zcqwA8dO": [
"qb1zx0DL",
"sXCxPFsD"
],
"qxvdnSE9": [
"6wBPUYdF",
"YYh8wtSZ"
]
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
"method": "gLrztrNw",
"body": "0jkKgGUC",
Add a field to disable following redirects on http checks
2022-04-01 21:31:15 +00:00
"disable_redirects": false,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tcp": "4jG5casb",
add http2 ping health checks (#8431) * add http2 ping checks * fix test issue * add h2ping check to config resources * add new test and docs for h2ping * fix grammatical inconsistency in H2PING documentation * resolve rebase conflicts, add test for h2ping tls verification failure * api documentation for h2ping * update test config data with H2PING * add H2PING to protocol buffers and update changelog * fix typo in changelog entry
2021-04-09 19:12:10 +00:00
"h2ping": "HCHU7gEb",
change config option to H2PingUseTLS
2021-10-05 01:36:18 +00:00
"h2ping_use_tls": false,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"interval": "28767s",
"output_max_size": 4096,
"docker_container_id": "THW6u7rL",
"shell": "C1Zt3Zwh",
feat: windows service health checks
2022-06-07 17:27:14 +00:00
"os_service": "aqq95BhP",
Add support for configuring TLS ServerName for health checks Some TLS servers require SNI, but the Golang HTTP client doesn't include it in the ClientHello when connecting to an IP address. This change adds a new TLSServerName field to health check definitions to optionally set it. This fixes #9473.
2021-02-25 06:35:34 +00:00
"tls_server_name": "6adc3bfb",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tls_skip_verify": true,
"timeout": "18506s",
"deregister_critical_service_after": "2366s"
}
],
"check_update_interval": "16507s",
"client_addr": "93.83.18.19",
"config_entries": {
"bootstrap": [
{
"kind": "proxy-defaults",
"name": "global",
"config": {
"foo": "bar",
"bar": 1.0
}
}
]
},
"auto_encrypt": {
"tls": false,
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"dns_san": [
"a.com",
"b.com"
],
"ip_san": [
"192.168.4.139",
"192.168.4.140"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"allow_tls": true
},
add HCP integration component (#14723) * add HCP integration * lint: use non-deprecated logging interface
2022-09-26 18:58:15 +00:00
"cloud": {
"resource_id": "N43DsscE",
"client_id": "6WvsDZCP",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"client_secret": "lCSMHOpB",
"hostname": "DH4bh7aC",
adding configuration option cloud.scada_address (#14936) * adding scada_address * config tests * add changelog entry
2022-10-13 09:31:28 +00:00
"auth_url": "332nCdR2",
"scada_address": "aoeusth232"
add HCP integration component (#14723) * add HCP integration * lint: use non-deprecated logging interface
2022-09-26 18:58:15 +00:00
},
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"connect": {
"ca_provider": "consul",
"ca_config": {
add root_cert_ttl option for consul connect, vault ca providers (#11428) * add root_cert_ttl option for consul connect, vault ca providers Signed-off-by: FFMMM <FFMMM@users.noreply.github.com> * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> * add changelog, pr feedback Signed-off-by: FFMMM <FFMMM@users.noreply.github.com> * Update .changelog/11428.txt, more docs Co-authored-by: Daniel Nephin <dnephin@hashicorp.com> * Update website/content/docs/agent/options.mdx Co-authored-by: Kyle Havlovitz <kylehav@gmail.com> Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Daniel Nephin <dnephin@hashicorp.com> Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
2021-11-02 18:02:10 +00:00
"root_cert_ttl": "96360h",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"intermediate_cert_ttl": "8760h",
"leaf_cert_ttl": "1h",
"csr_max_per_second": 100,
"csr_max_concurrent": 2
},
"enable_mesh_gateway_wan_federation": false,
Remove the `connect.enable_serverless_plugin` agent configuration option (#15710)
2022-12-08 19:46:42 +00:00
"enabled": true
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"gossip_lan": {
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"gossip_nodes": 6,
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"gossip_interval": "25252s",
"retransmit_mult": 1234,
"suspicion_mult": 1235,
"probe_interval": "101ms",
"probe_timeout": "102ms"
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"gossip_wan": {
"gossip_nodes": 2,
"gossip_interval": "6966s",
"retransmit_mult": 16384,
"suspicion_mult": 16385,
"probe_interval": "103ms",
"probe_timeout": "104ms"
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
"datacenter": "rzo029wg",
"default_query_time": "16743s",
"disable_anonymous_signature": true,
"disable_coordinates": true,
"disable_host_node_id": true,
"disable_http_unprintable_char_filter": true,
"disable_keyring_file": true,
"disable_remote_exec": true,
"disable_update_check": true,
"discard_check_output": true,
"discovery_max_stale": "5s",
"domain": "7W1xXSqd",
"alt_domain": "1789hsd",
"dns_config": {
"allow_stale": true,
"a_record_limit": 29907,
"disable_compression": true,
"enable_truncate": true,
"max_stale": "29685s",
"node_ttl": "7084s",
"only_passing": true,
"recursor_timeout": "4427s",
"service_ttl": {
"*": "32030s"
},
"udp_answer_limit": 29909,
"use_cache": true,
"cache_max_age": "5m",
"prefer_namespace": true
},
"enable_acl_replication": true,
"enable_agent_tls_for_checks": true,
"enable_central_service_config": false,
"enable_debug": true,
"enable_script_checks": true,
"enable_local_script_checks": true,
"enable_syslog": true,
"encrypt": "A4wELWqH",
"encrypt_verify_incoming": true,
"encrypt_verify_outgoing": true,
"http_config": {
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"block_endpoints": [
"RBvAFcGD",
"fWOWFznh"
],
"allow_write_http_from": [
"127.0.0.1/8",
"22.33.44.55/32",
"0.0.0.0/0"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"response_headers": {
"M6TKa9NP": "xjuxjOzQ",
"JRCrHZed": "rl0mTx81"
},
"use_cache": false,
"max_header_bytes": 10
},
"key_file": "IEkkwgIA",
"leave_on_terminate": true,
Add OSS bits for supporting specifying the enterprise license via config
2021-05-10 14:10:39 +00:00
"license_path": "/path/to/license.lic",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"limits": {
"http_max_conns_per_client": 100,
"https_handshake_timeout": "2391ms",
"rpc_handshake_timeout": "1932ms",
Refactor client RPC timeouts (#14965) Fix an issue where rpc_hold_timeout was being used as the timeout for non-blocking queries. Users should be able to tune read timeouts without fiddling with rpc_hold_timeout. A new configuration `rpc_read_timeout` is created. Refactor some implementation from the original PR 11500 to remove the misleading linkage between RPCInfo's timeout (used to retry in case of certain modes of failures) and the client RPC timeouts.
2022-10-18 19:05:09 +00:00
"rpc_client_timeout": "62s",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"rpc_rate": 12029.43,
"rpc_max_burst": 44848,
"rpc_max_conns_per_client": 2954,
testing: fix a test for 32-bit The hcl decoding apparently uses strconv.ParseInt, which fails to parse a 64bit int. Since hcl v1 is basically EOl, it seems unlikely we'll fix this in hcl. Since this test is only about loading values from config files, the extra large number doesn't seem important. Trim a few zeros from the numbers so that they parse properly on 32bit platforms. Also skip a slow test when -short is used.
2021-06-28 22:33:57 +00:00
"kv_max_value_size": 1234567800,
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"txn_max_req_len": 567800000,
"request_limits": {
"mode": "permissive",
"read_rate": 99.0,
"write_rate": 101.0
}
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
"log_level": "k1zo9Spt",
"log_json": true,
"max_query_time": "18237s",
"node_id": "AsUIlw99",
"node_meta": {
"5mgGQMBk": "mJLtVMSG",
"A7ynFMJB": "0Nx6RGab"
},
"node_name": "otlLxGaI",
"non_voting_server": true,
config: add agent config flag for enterprise clients to indicate they wish to join a particular partition (#10572)
2021-07-08 15:03:38 +00:00
"partition": "",
peering: add config to enable/disable peering (#13867) * peering: add config to enable/disable peering Add config: ``` peering { enabled = true } ``` Defaults to true. When disabled: 1. All peering RPC endpoints will return an error 2. Leader won't start its peering establishment goroutines 3. Leader won't start its peering deletion goroutines
2022-07-22 22:20:21 +00:00
"peering": {
"enabled": true
},
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"performance": {
"leave_drain_time": "8265s",
"raft_multiplier": 5,
"rpc_hold_timeout": "15707s"
},
"pid_file": "43xN80Km",
"ports": {
"dns": 7001,
"http": 7999,
"https": 15127,
"server": 3757,
"grpc": 4881,
Add separate grpc_tls port. To ease the transition for users, the original gRPC port can still operate in a deprecated mode as either plain-text or TLS mode. This behavior should be removed in a future release whenever we no longer support this. The resulting behavior from this commit is: `ports.grpc > 0 && ports.grpc_tls > 0` spawns both plain-text and tls ports. `ports.grpc > 0 && grpc.tls == undefined` spawns a single plain-text port. `ports.grpc > 0 && grpc.tls != undefined` spawns a single tls port (backwards compat mode).
2022-08-19 17:07:22 +00:00
"grpc_tls": 5201,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"sidecar_min_port": 8888,
"sidecar_max_port": 9999,
"expose_min_port": 1111,
"expose_max_port": 2222
},
"protocol": 30793,
"primary_datacenter": "ejtmd43d",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"primary_gateways": [
"aej8eeZo",
"roh2KahS"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"primary_gateways_interval": "18866s",
"raft_protocol": 3,
"raft_snapshot_threshold": 16384,
"raft_snapshot_interval": "30s",
"raft_trailing_logs": 83749,
Adding experimental support for a more efficient LogStore implementation (#16176) * Adding experimental support for a more efficient LogStore implementation * Adding changelog entry * Fix go mod tidy issues
2023-02-08 16:50:22 +00:00
"raft_logstore": {
"backend" : "wal",
"disable_log_cache": true,
"verification": {
"enabled": true,
"interval":"12345s"
},
"boltdb": {
"no_freelist_sync": true
},
"wal": {
"segment_size_mb": 15
}
config: add NoFreelistSync option # Conflicts: # agent/config/testdata/TestRuntimeConfig_Sanitize-enterprise.golden # agent/consul/server.go
2021-11-17 23:15:19 +00:00
},
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"read_replica": true,
"reconnect_timeout": "23739s",
"reconnect_timeout_wan": "26694s",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"recursors": [
"63.38.39.58",
"92.49.18.18"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"rejoin_after_leave": true,
"retry_interval": "8067s",
"retry_interval_wan": "28866s",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"retry_join": [
"pbsSFY7U",
"l0qLtWij"
],
"retry_join_wan": [
"PFsR02Ye",
"rJdQIhER"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"retry_max": 913,
"retry_max_wan": 23160,
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"rpc": {
"enable_streaming": true
},
[sync ent] increase segment max limit to 4*64, make configurable (#1424) (#11795) * commit b6eb27563e747a78b7647d2b5da405e46364cc46 Author: FFMMM <FFMMM@users.noreply.github.com> Date: Thu Dec 9 13:53:44 2021 -0800 increase segment max limit to 4*64, make configurable (#1424) Signed-off-by: FFMMM <FFMMM@users.noreply.github.com> * fix: rename ent changelog file Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
2021-12-09 23:36:11 +00:00
"segment_limit": 123,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"serf_lan": "99.43.63.15",
"serf_wan": "67.88.33.19",
"server": true,
"server_name": "Oerr9n1G",
"service": {
"id": "dLOXpSCI",
"name": "o1ynPkp0",
"meta": {
"mymeta": "data"
},
"tagged_addresses": {
"lan": {
"address": "2d79888a",
"port": 2143
},
"wan": {
"address": "d4db85e2",
"port": 6109
}
},
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"tags": [
"nkwshvM5",
"NTDWn3ek"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"address": "cOlSOhbp",
"token": "msy7iWER",
"port": 24237,
"weights": {
"passing": 100,
"warning": 1
},
"enable_tag_override": true,
"check": {
"id": "RMi85Dv8",
"name": "iehanzuq",
"status": "rCvn53TH",
"notes": "fti5lfF3",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"args": [
"16WRUmwS",
"QWk7j7ae"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"http": "dl3Fgme3",
"header": {
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"rjm4DEd3": [
"2m3m2Fls"
],
"l4HwQ112": [
"fk56MNlo",
"dhLK56aZ"
]
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
"method": "9afLm3Mj",
"body": "wVVL2V6f",
Add a field to disable following redirects on http checks
2022-04-01 21:31:15 +00:00
"disable_redirects": true,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tcp": "fjiLFqVd",
add http2 ping health checks (#8431) * add http2 ping checks * fix test issue * add h2ping check to config resources * add new test and docs for h2ping * fix grammatical inconsistency in H2PING documentation * resolve rebase conflicts, add test for h2ping tls verification failure * api documentation for h2ping * update test config data with H2PING * add H2PING to protocol buffers and update changelog * fix typo in changelog entry
2021-04-09 19:12:10 +00:00
"h2ping": "5NbNWhan",
change config option to H2PingUseTLS
2021-10-05 01:36:18 +00:00
"h2ping_use_tls": false,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"interval": "23926s",
"output_max_size": 4096,
"docker_container_id": "dO5TtRHk",
"shell": "e6q2ttES",
feat: windows service health checks
2022-06-07 17:27:14 +00:00
"os_service": "RAa85Dv8",
Add support for configuring TLS ServerName for health checks Some TLS servers require SNI, but the Golang HTTP client doesn't include it in the ClientHello when connecting to an IP address. This change adds a new TLSServerName field to health check definitions to optionally set it. This fixes #9473.
2021-02-25 06:35:34 +00:00
"tls_server_name": "ECSHk8WF",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tls_skip_verify": true,
"timeout": "38483s",
"deregister_critical_service_after": "68787s"
},
"checks": [
{
"id": "Zv99e9Ka",
"name": "sgV4F7Pk",
"notes": "yP5nKbW0",
"status": "7oLMEyfu",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"args": [
"5wEZtZpv",
"0Ihyk8cS"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"http": "KyDjGY9H",
"header": {
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"gv5qefTz": [
"5Olo2pMG",
"PvvKWQU5"
],
"SHOVq1Vv": [
"jntFhyym",
"GYJh32pp"
]
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
"method": "T66MFBfR",
"body": "OwGjTFQi",
Add a field to disable following redirects on http checks
2022-04-01 21:31:15 +00:00
"disable_redirects": true,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tcp": "bNnNfx2A",
add http2 ping health checks (#8431) * add http2 ping checks * fix test issue * add h2ping check to config resources * add new test and docs for h2ping * fix grammatical inconsistency in H2PING documentation * resolve rebase conflicts, add test for h2ping tls verification failure * api documentation for h2ping * update test config data with H2PING * add H2PING to protocol buffers and update changelog * fix typo in changelog entry
2021-04-09 19:12:10 +00:00
"h2ping": "qC1pidiW",
change config option to H2PingUseTLS
2021-10-05 01:36:18 +00:00
"h2ping_use_tls": false,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"interval": "22224s",
"output_max_size": 4096,
"docker_container_id": "ipgdFtjd",
"shell": "omVZq7Sz",
feat: windows service health checks
2022-06-07 17:27:14 +00:00
"os_service": "ZA99e9Ka",
Add support for configuring TLS ServerName for health checks Some TLS servers require SNI, but the Golang HTTP client doesn't include it in the ClientHello when connecting to an IP address. This change adds a new TLSServerName field to health check definitions to optionally set it. This fixes #9473.
2021-02-25 06:35:34 +00:00
"tls_server_name": "axw5QPL5",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tls_skip_verify": true,
"timeout": "18913s",
"deregister_critical_service_after": "8482s"
},
{
"id": "G79O6Mpr",
"name": "IEqrzrsd",
"notes": "SVqApqeM",
"status": "XXkVoZXt",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"args": [
"wD05Bvao",
"rLYB7kQC"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"http": "kyICZsn8",
"header": {
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"4ebP5vL4": [
"G20SrL5Q",
"DwPKlMbo"
],
"p2UI34Qz": [
"UsG1D0Qh",
"NHhRiB6s"
]
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
"method": "ciYHWors",
"body": "lUVLGYU7",
Add a field to disable following redirects on http checks
2022-04-01 21:31:15 +00:00
"disable_redirects": false,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tcp": "FfvCwlqH",
add http2 ping health checks (#8431) * add http2 ping checks * fix test issue * add h2ping check to config resources * add new test and docs for h2ping * fix grammatical inconsistency in H2PING documentation * resolve rebase conflicts, add test for h2ping tls verification failure * api documentation for h2ping * update test config data with H2PING * add H2PING to protocol buffers and update changelog * fix typo in changelog entry
2021-04-09 19:12:10 +00:00
"h2ping": "spI3muI3",
change config option to H2PingUseTLS
2021-10-05 01:36:18 +00:00
"h2ping_use_tls": false,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"interval": "12356s",
"output_max_size": 4096,
"docker_container_id": "HBndBU6R",
"shell": "hVI33JjA",
feat: windows service health checks
2022-06-07 17:27:14 +00:00
"os_service": "GAaO6Mpr",
Add support for configuring TLS ServerName for health checks Some TLS servers require SNI, but the Golang HTTP client doesn't include it in the ClientHello when connecting to an IP address. This change adds a new TLSServerName field to health check definitions to optionally set it. This fixes #9473.
2021-02-25 06:35:34 +00:00
"tls_server_name": "7uwWOnUS",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tls_skip_verify": true,
"timeout": "38282s",
"deregister_critical_service_after": "4992s"
}
],
"connect": {
"native": true
}
},
"services": [
{
"id": "wI1dzxS4",
"name": "7IszXMQ1",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"tags": [
"0Zwg8l6v",
"zebELdN5"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"address": "9RhqPSPB",
"token": "myjKJkWH",
"port": 72219,
"enable_tag_override": true,
"check": {
"id": "qmfeO5if",
"name": "atDGP7n5",
"status": "pDQKEhWL",
"notes": "Yt8EDLev",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"args": [
"81EDZLPa",
"bPY5X8xd"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"http": "qzHYvmJO",
"header": {
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"UkpmZ3a3": [
"2dfzXuxZ"
],
"cVFpko4u": [
"gGqdEB6k",
"9LsRo22u"
]
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
"method": "X5DrovFc",
"body": "WeikigLh",
Add a field to disable following redirects on http checks
2022-04-01 21:31:15 +00:00
"disable_redirects": true,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tcp": "ICbxkpSF",
add http2 ping health checks (#8431) * add http2 ping checks * fix test issue * add h2ping check to config resources * add new test and docs for h2ping * fix grammatical inconsistency in H2PING documentation * resolve rebase conflicts, add test for h2ping tls verification failure * api documentation for h2ping * update test config data with H2PING * add H2PING to protocol buffers and update changelog * fix typo in changelog entry
2021-04-09 19:12:10 +00:00
"h2ping": "7s7BbMyb",
change config option to H2PingUseTLS
2021-10-05 01:36:18 +00:00
"h2ping_use_tls": false,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"interval": "24392s",
"output_max_size": 4096,
"docker_container_id": "ZKXr68Yb",
"shell": "CEfzx0Fo",
feat: windows service health checks
2022-06-07 17:27:14 +00:00
"os_service": "amfeO5if",
Add support for configuring TLS ServerName for health checks Some TLS servers require SNI, but the Golang HTTP client doesn't include it in the ClientHello when connecting to an IP address. This change adds a new TLSServerName field to health check definitions to optionally set it. This fixes #9473.
2021-02-25 06:35:34 +00:00
"tls_server_name": "4f191d4F",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tls_skip_verify": true,
"timeout": "38333s",
"deregister_critical_service_after": "44214s"
},
"connect": {
"sidecar_service": {}
}
},
{
"id": "MRHVMZuD",
"name": "6L6BVfgH",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"tags": [
"7Ale4y6o",
"PMBW08hy"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"address": "R6H6g8h0",
"token": "ZgY8gjMI",
"port": 38292,
"weights": {
"passing": 1979,
"warning": 6
},
"enable_tag_override": true,
"checks": [
{
"id": "GTti9hCo",
"name": "9OOS93ne",
"notes": "CQy86DH0",
"status": "P0SWDvrk",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"args": [
"EXvkYIuG",
"BATOyt6h"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"http": "u97ByEiW",
"header": {
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"MUlReo8L": [
"AUZG7wHG",
"gsN0Dc2N"
],
"1UJXjVrT": [
"OJgxzTfk",
"xZZrFsq7"
]
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
"method": "5wkAxCUE",
"body": "7CRjCJyz",
Add a field to disable following redirects on http checks
2022-04-01 21:31:15 +00:00
"disable_redirects": false,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tcp": "MN3oA9D2",
add http2 ping health checks (#8431) * add http2 ping checks * fix test issue * add h2ping check to config resources * add new test and docs for h2ping * fix grammatical inconsistency in H2PING documentation * resolve rebase conflicts, add test for h2ping tls verification failure * api documentation for h2ping * update test config data with H2PING * add H2PING to protocol buffers and update changelog * fix typo in changelog entry
2021-04-09 19:12:10 +00:00
"h2ping": "OV6Q2XEg",
change config option to H2PingUseTLS
2021-10-05 01:36:18 +00:00
"h2ping_use_tls": false,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"interval": "32718s",
"output_max_size": 4096,
"docker_container_id": "cU15LMet",
"shell": "nEz9qz2l",
feat: windows service health checks
2022-06-07 17:27:14 +00:00
"os_service": "GTti9hCA",
Add support for configuring TLS ServerName for health checks Some TLS servers require SNI, but the Golang HTTP client doesn't include it in the ClientHello when connecting to an IP address. This change adds a new TLSServerName field to health check definitions to optionally set it. This fixes #9473.
2021-02-25 06:35:34 +00:00
"tls_server_name": "f43ouY7a",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tls_skip_verify": true,
"timeout": "34738s",
"deregister_critical_service_after": "84282s"
},
{
"id": "UHsDeLxG",
"name": "PQSaPWlT",
"notes": "jKChDOdl",
"status": "5qFz6OZn",
"output_max_size": 4096,
"timeout": "4868s",
"ttl": "11222s",
"deregister_critical_service_after": "68482s"
}
],
"connect": {}
},
{
"id": "Kh81CPF6",
"kind": "connect-proxy",
"name": "Kh81CPF6-proxy",
"port": 31471,
"proxy": {
"config": {
"cedGGtZf": "pWrUNiWw"
},
"destination_service_id": "6L6BVfgH-id",
"destination_service_name": "6L6BVfgH",
"local_service_address": "127.0.0.2",
"local_service_port": 23759,
"expose": {
"checks": true,
"paths": [
{
"path": "/health",
"local_path_port": 8080,
"listener_port": 21500,
"protocol": "http"
}
]
},
Replace TransparentProxy bool with ProxyMode This PR replaces the original boolean used to configure transparent proxy mode. It was replaced with a string mode that can be set to: - "": Empty string is the default for when the setting should be defaulted from other configuration like config entries. - "direct": Direct mode is how applications originally opted into the mesh. Proxy listeners need to be dialed directly. - "transparent": Transparent mode enables configuring Envoy as a transparent proxy. Traffic must be captured and redirected to the inbound and outbound listeners. This PR also adds a struct for transparent proxy specific configuration. Initially this is not stored as a pointer. Will revisit that decision before GA.
2021-04-12 15:35:14 +00:00
"mode": "transparent",
"transparent_proxy": {
Add flag for transparent proxies to dial individual instances (#10329)
2021-06-09 20:34:17 +00:00
"outbound_listener_port": 10101,
"dialed_directly": true
Replace TransparentProxy bool with ProxyMode This PR replaces the original boolean used to configure transparent proxy mode. It was replaced with a string mode that can be set to: - "": Empty string is the default for when the setting should be defaulted from other configuration like config entries. - "direct": Direct mode is how applications originally opted into the mesh. Proxy listeners need to be dialed directly. - "transparent": Transparent mode enables configuring Envoy as a transparent proxy. Traffic must be captured and redirected to the inbound and outbound listeners. This PR also adds a struct for transparent proxy specific configuration. Initially this is not stored as a pointer. Will revisit that decision before GA.
2021-04-12 15:35:14 +00:00
},
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"upstreams": [
{
"destination_name": "KPtAj2cb",
"local_bind_port": 4051,
"config": {
"kzRnZOyd": "nUNKoL8H"
}
},
{
"destination_name": "KSd8HsRl",
"destination_namespace": "9nakw0td",
oss portion of ent #1069 (#10883)
2021-08-20 16:57:45 +00:00
"destination_partition": "part-9nakw0td",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"destination_type": "prepared_query",
"local_bind_address": "127.24.88.0",
Fixup agent/config tests Signed-off-by: Mark Anderson <manderson@hashicorp.com>
2021-05-05 01:30:20 +00:00
"local_bind_port": 11884
},
{
"destination_name": "placeholder",
"destination_namespace": "9nakw0td",
oss portion of ent #1069 (#10883)
2021-08-20 16:57:45 +00:00
"destination_partition": "part-9nakw0td",
Fixup agent/config tests Signed-off-by: Mark Anderson <manderson@hashicorp.com>
2021-05-05 01:30:20 +00:00
"destination_type": "prepared_query",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"local_bind_socket_path": "/foo/bar/upstream",
"local_bind_socket_mode": "0600"
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
}
]
}
},
{
"id": "kvVqbwSE",
"kind": "mesh-gateway",
"name": "gw-primary-dc",
"port": 27147,
"proxy": {
"config": {
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"1CuJHVfw": "Kzqsa7yc"
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
}
}
}
],
"session_ttl_min": "26627s",
"skip_leave_on_interrupt": true,
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"start_join": [
"LR3hGDoG",
"MwVpZ4Up"
],
"start_join_wan": [
"EbFSc3nA",
"kwXTh623"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"syslog_facility": "hHv79Uia",
"tagged_addresses": {
"7MYgHrYH": "dALJAhLD",
"h6DdBy6K": "ebrr9zZ8"
},
"telemetry": {
"circonus_api_app": "p4QOTe9j",
"circonus_api_token": "E3j35V23",
"circonus_api_url": "mEMjHpGg",
"circonus_broker_id": "BHlxUhed",
"circonus_broker_select_tag": "13xy1gHm",
"circonus_check_display_name": "DRSlQR6n",
"circonus_check_force_metric_activation": "Ua5FGVYf",
"circonus_check_id": "kGorutad",
"circonus_check_instance_id": "rwoOL6R4",
"circonus_check_search_tag": "ovT4hT4f",
"circonus_check_tags": "prvO4uBl",
"circonus_submission_interval": "DolzaflP",
"circonus_submission_url": "gTcbS93G",
"disable_hostname": true,
"dogstatsd_addr": "0wSndumK",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"dogstatsd_tags": [
"3N81zSUB",
"Xtj8AnXZ"
],
Retry on bad dogstatsd connection (#13091) - Introduce a new telemetry configurable parameter retry_failed_connection. User can set the value to true to let consul agent continue its start process on failed connection to datadog server. When set to false, agent will stop on failed start. The default behavior is true. Co-authored-by: Dan Upton <daniel@floppy.co> Co-authored-by: Evan Culver <eculver@users.noreply.github.com>
2022-05-19 20:03:46 +00:00
"retry_failed_connection": true,
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"filter_default": true,
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"prefix_filter": [
"+oJotS8XJ",
"-cazlEhGn"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"metrics_prefix": "ftO6DySn",
"prometheus_retention_time": "15s",
"statsd_address": "drce87cy",
no 1.9 style metrics (#13532) Signed-off-by: acpana <8968914+acpana@users.noreply.github.com>
2022-06-29 16:46:37 +00:00
"statsite_address": "HpFwKB8R"
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
Support per-listener TLS configuration ⚙️ (#12504) Introduces the capability to configure TLS differently for Consul's listeners/ports (i.e. HTTPS, gRPC, and the internal multiplexed RPC port) which is useful in scenarios where you may want the HTTPS or gRPC interfaces to present a certificate signed by a well-known/public CA, rather than the certificate used for internal communication which must have a SAN in the form `server.<dc>.consul`.
2022-03-18 10:46:58 +00:00
"tls": {
"defaults": {
"ca_file": "a5tY0opl",
"ca_path": "bN63LpXu",
"cert_file": "hB4PoxkL",
"key_file": "Po0hB1tY",
agent: convert listener config to TLS types (#12522) * tlsutil: initial implementation of types/TLSVersion tlsutil: add test for parsing deprecated agent TLS version strings tlsutil: return TLSVersionInvalid with error tlsutil: start moving tlsutil cipher suite lookups over to types/tls tlsutil: rename tlsLookup to ParseTLSVersion, add cipherSuiteLookup agent: attempt to use types in runtime config agent: implement b.tlsVersion validation in config builder agent: fix tlsVersion nil check in builder tlsutil: update to renamed ParseTLSVersion and goTLSVersions tlsutil: fixup TestConfigurator_CommonTLSConfigTLSMinVersion tlsutil: disable invalid config parsing tests tlsutil: update tests auto_config: lookup old config strings from base.TLSMinVersion auto_config: update endpoint tests to use TLS types agent: update runtime_test to use TLS types agent: update TestRuntimeCinfig_Sanitize.golden agent: update config runtime tests to expect TLS types * website: update Consul agent tls_min_version values * agent: fixup TLS parsing and compilation errors * test: fixup lint issues in agent/config_runtime_test and tlsutil/config_test * tlsutil: add CHACHA20_POLY1305 cipher suites to goTLSCipherSuites * test: revert autoconfig tls min version fixtures to old format * types: add TLSVersions public function * agent: add warning for deprecated TLS version strings * agent: move agent config specific logic from tlsutil.ParseTLSVersion into agent config builder * tlsutil(BREAKING): change default TLS min version to TLS 1.2 * agent: move ParseCiphers logic from tlsutil into agent config builder * tlsutil: remove unused CipherString function * agent: fixup import for types package * Revert "tlsutil: remove unused CipherString function" This reverts commit 6ca7f6f58d268e617501b7db9500113c13bae70c. * agent: fixup config builder and runtime tests * tlsutil: fixup one remaining ListenerConfig -> ProtocolConfig * test: move TLS cipher suites parsing test from tlsutil into agent config builder tests * agent: remove parseCiphers helper from auto_config_endpoint_test * test: remove unused imports from tlsutil * agent: remove resolved FIXME comment * tlsutil: remove TODO and FIXME in cipher suite validation * agent: prevent setting inherited cipher suite config when TLS 1.3 is specified * changelog: add entry for converting agent config to TLS types * agent: remove FIXME in runtime test, this is covered in builder tests with invalid tls9 value now * tlsutil: remove config tests for values checked at agent config builder boundary * tlsutil: remove tls version check from loadProtocolConfig * tlsutil: remove tests and TODOs for logic checked in TestBuilder_tlsVersion and TestBuilder_tlsCipherSuites * website: update search link for supported Consul agent cipher suites * website: apply review suggestions for tls_min_version description * website: attempt to clean up markdown list formatting for tls_min_version * website: moar linebreaks to fix tls_min_version formatting * Revert "website: moar linebreaks to fix tls_min_version formatting" This reverts commit 38585927422f73ebf838a7663e566ac245f2a75c. * autoconfig: translate old values for TLSMinVersion * agent: rename var for translated value of deprecated TLS version value * Update agent/config/deprecated.go Co-authored-by: Dan Upton <daniel@floppy.co> * agent: fix lint issue * agent: fixup deprecated config test assertions for updated warning Co-authored-by: Dan Upton <daniel@floppy.co>
2022-03-24 19:32:25 +00:00
"tls_cipher_suites": "TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256",
"tls_min_version": "TLSv1_2",
Support per-listener TLS configuration ⚙️ (#12504) Introduces the capability to configure TLS differently for Consul's listeners/ports (i.e. HTTPS, gRPC, and the internal multiplexed RPC port) which is useful in scenarios where you may want the HTTPS or gRPC interfaces to present a certificate signed by a well-known/public CA, rather than the certificate used for internal communication which must have a SAN in the form `server.<dc>.consul`.
2022-03-18 10:46:58 +00:00
"verify_incoming": true,
"verify_outgoing": true
},
"internal_rpc": {
"ca_file": "mKl19Utl",
"ca_path": "lOp1nhPa",
"cert_file": "dfJ4oPln",
"key_file": "aL1Knkpo",
agent: convert listener config to TLS types (#12522) * tlsutil: initial implementation of types/TLSVersion tlsutil: add test for parsing deprecated agent TLS version strings tlsutil: return TLSVersionInvalid with error tlsutil: start moving tlsutil cipher suite lookups over to types/tls tlsutil: rename tlsLookup to ParseTLSVersion, add cipherSuiteLookup agent: attempt to use types in runtime config agent: implement b.tlsVersion validation in config builder agent: fix tlsVersion nil check in builder tlsutil: update to renamed ParseTLSVersion and goTLSVersions tlsutil: fixup TestConfigurator_CommonTLSConfigTLSMinVersion tlsutil: disable invalid config parsing tests tlsutil: update tests auto_config: lookup old config strings from base.TLSMinVersion auto_config: update endpoint tests to use TLS types agent: update runtime_test to use TLS types agent: update TestRuntimeCinfig_Sanitize.golden agent: update config runtime tests to expect TLS types * website: update Consul agent tls_min_version values * agent: fixup TLS parsing and compilation errors * test: fixup lint issues in agent/config_runtime_test and tlsutil/config_test * tlsutil: add CHACHA20_POLY1305 cipher suites to goTLSCipherSuites * test: revert autoconfig tls min version fixtures to old format * types: add TLSVersions public function * agent: add warning for deprecated TLS version strings * agent: move agent config specific logic from tlsutil.ParseTLSVersion into agent config builder * tlsutil(BREAKING): change default TLS min version to TLS 1.2 * agent: move ParseCiphers logic from tlsutil into agent config builder * tlsutil: remove unused CipherString function * agent: fixup import for types package * Revert "tlsutil: remove unused CipherString function" This reverts commit 6ca7f6f58d268e617501b7db9500113c13bae70c. * agent: fixup config builder and runtime tests * tlsutil: fixup one remaining ListenerConfig -> ProtocolConfig * test: move TLS cipher suites parsing test from tlsutil into agent config builder tests * agent: remove parseCiphers helper from auto_config_endpoint_test * test: remove unused imports from tlsutil * agent: remove resolved FIXME comment * tlsutil: remove TODO and FIXME in cipher suite validation * agent: prevent setting inherited cipher suite config when TLS 1.3 is specified * changelog: add entry for converting agent config to TLS types * agent: remove FIXME in runtime test, this is covered in builder tests with invalid tls9 value now * tlsutil: remove config tests for values checked at agent config builder boundary * tlsutil: remove tls version check from loadProtocolConfig * tlsutil: remove tests and TODOs for logic checked in TestBuilder_tlsVersion and TestBuilder_tlsCipherSuites * website: update search link for supported Consul agent cipher suites * website: apply review suggestions for tls_min_version description * website: attempt to clean up markdown list formatting for tls_min_version * website: moar linebreaks to fix tls_min_version formatting * Revert "website: moar linebreaks to fix tls_min_version formatting" This reverts commit 38585927422f73ebf838a7663e566ac245f2a75c. * autoconfig: translate old values for TLSMinVersion * agent: rename var for translated value of deprecated TLS version value * Update agent/config/deprecated.go Co-authored-by: Dan Upton <daniel@floppy.co> * agent: fix lint issue * agent: fixup deprecated config test assertions for updated warning Co-authored-by: Dan Upton <daniel@floppy.co>
2022-03-24 19:32:25 +00:00
"tls_cipher_suites": "TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256,TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA",
"tls_min_version": "TLSv1_1",
Support per-listener TLS configuration ⚙️ (#12504) Introduces the capability to configure TLS differently for Consul's listeners/ports (i.e. HTTPS, gRPC, and the internal multiplexed RPC port) which is useful in scenarios where you may want the HTTPS or gRPC interfaces to present a certificate signed by a well-known/public CA, rather than the certificate used for internal communication which must have a SAN in the form `server.<dc>.consul`.
2022-03-18 10:46:58 +00:00
"verify_incoming": true,
"verify_outgoing": true
},
"https": {
"ca_file": "7Yu1PolM",
"ca_path": "nu4PlHzn",
"cert_file": "1yrhPlMk",
"key_file": "1bHapOkL",
agent: convert listener config to TLS types (#12522) * tlsutil: initial implementation of types/TLSVersion tlsutil: add test for parsing deprecated agent TLS version strings tlsutil: return TLSVersionInvalid with error tlsutil: start moving tlsutil cipher suite lookups over to types/tls tlsutil: rename tlsLookup to ParseTLSVersion, add cipherSuiteLookup agent: attempt to use types in runtime config agent: implement b.tlsVersion validation in config builder agent: fix tlsVersion nil check in builder tlsutil: update to renamed ParseTLSVersion and goTLSVersions tlsutil: fixup TestConfigurator_CommonTLSConfigTLSMinVersion tlsutil: disable invalid config parsing tests tlsutil: update tests auto_config: lookup old config strings from base.TLSMinVersion auto_config: update endpoint tests to use TLS types agent: update runtime_test to use TLS types agent: update TestRuntimeCinfig_Sanitize.golden agent: update config runtime tests to expect TLS types * website: update Consul agent tls_min_version values * agent: fixup TLS parsing and compilation errors * test: fixup lint issues in agent/config_runtime_test and tlsutil/config_test * tlsutil: add CHACHA20_POLY1305 cipher suites to goTLSCipherSuites * test: revert autoconfig tls min version fixtures to old format * types: add TLSVersions public function * agent: add warning for deprecated TLS version strings * agent: move agent config specific logic from tlsutil.ParseTLSVersion into agent config builder * tlsutil(BREAKING): change default TLS min version to TLS 1.2 * agent: move ParseCiphers logic from tlsutil into agent config builder * tlsutil: remove unused CipherString function * agent: fixup import for types package * Revert "tlsutil: remove unused CipherString function" This reverts commit 6ca7f6f58d268e617501b7db9500113c13bae70c. * agent: fixup config builder and runtime tests * tlsutil: fixup one remaining ListenerConfig -> ProtocolConfig * test: move TLS cipher suites parsing test from tlsutil into agent config builder tests * agent: remove parseCiphers helper from auto_config_endpoint_test * test: remove unused imports from tlsutil * agent: remove resolved FIXME comment * tlsutil: remove TODO and FIXME in cipher suite validation * agent: prevent setting inherited cipher suite config when TLS 1.3 is specified * changelog: add entry for converting agent config to TLS types * agent: remove FIXME in runtime test, this is covered in builder tests with invalid tls9 value now * tlsutil: remove config tests for values checked at agent config builder boundary * tlsutil: remove tls version check from loadProtocolConfig * tlsutil: remove tests and TODOs for logic checked in TestBuilder_tlsVersion and TestBuilder_tlsCipherSuites * website: update search link for supported Consul agent cipher suites * website: apply review suggestions for tls_min_version description * website: attempt to clean up markdown list formatting for tls_min_version * website: moar linebreaks to fix tls_min_version formatting * Revert "website: moar linebreaks to fix tls_min_version formatting" This reverts commit 38585927422f73ebf838a7663e566ac245f2a75c. * autoconfig: translate old values for TLSMinVersion * agent: rename var for translated value of deprecated TLS version value * Update agent/config/deprecated.go Co-authored-by: Dan Upton <daniel@floppy.co> * agent: fix lint issue * agent: fixup deprecated config test assertions for updated warning Co-authored-by: Dan Upton <daniel@floppy.co>
2022-03-24 19:32:25 +00:00
"tls_min_version": "TLSv1_3",
Support per-listener TLS configuration ⚙️ (#12504) Introduces the capability to configure TLS differently for Consul's listeners/ports (i.e. HTTPS, gRPC, and the internal multiplexed RPC port) which is useful in scenarios where you may want the HTTPS or gRPC interfaces to present a certificate signed by a well-known/public CA, rather than the certificate used for internal communication which must have a SAN in the form `server.<dc>.consul`.
2022-03-18 10:46:58 +00:00
"verify_incoming": true,
"verify_outgoing": true
},
"grpc": {
"ca_file": "lOp1nhJk",
"ca_path": "fLponKpl",
"cert_file": "a674klPn",
"key_file": "1y4prKjl",
agent: convert listener config to TLS types (#12522) * tlsutil: initial implementation of types/TLSVersion tlsutil: add test for parsing deprecated agent TLS version strings tlsutil: return TLSVersionInvalid with error tlsutil: start moving tlsutil cipher suite lookups over to types/tls tlsutil: rename tlsLookup to ParseTLSVersion, add cipherSuiteLookup agent: attempt to use types in runtime config agent: implement b.tlsVersion validation in config builder agent: fix tlsVersion nil check in builder tlsutil: update to renamed ParseTLSVersion and goTLSVersions tlsutil: fixup TestConfigurator_CommonTLSConfigTLSMinVersion tlsutil: disable invalid config parsing tests tlsutil: update tests auto_config: lookup old config strings from base.TLSMinVersion auto_config: update endpoint tests to use TLS types agent: update runtime_test to use TLS types agent: update TestRuntimeCinfig_Sanitize.golden agent: update config runtime tests to expect TLS types * website: update Consul agent tls_min_version values * agent: fixup TLS parsing and compilation errors * test: fixup lint issues in agent/config_runtime_test and tlsutil/config_test * tlsutil: add CHACHA20_POLY1305 cipher suites to goTLSCipherSuites * test: revert autoconfig tls min version fixtures to old format * types: add TLSVersions public function * agent: add warning for deprecated TLS version strings * agent: move agent config specific logic from tlsutil.ParseTLSVersion into agent config builder * tlsutil(BREAKING): change default TLS min version to TLS 1.2 * agent: move ParseCiphers logic from tlsutil into agent config builder * tlsutil: remove unused CipherString function * agent: fixup import for types package * Revert "tlsutil: remove unused CipherString function" This reverts commit 6ca7f6f58d268e617501b7db9500113c13bae70c. * agent: fixup config builder and runtime tests * tlsutil: fixup one remaining ListenerConfig -> ProtocolConfig * test: move TLS cipher suites parsing test from tlsutil into agent config builder tests * agent: remove parseCiphers helper from auto_config_endpoint_test * test: remove unused imports from tlsutil * agent: remove resolved FIXME comment * tlsutil: remove TODO and FIXME in cipher suite validation * agent: prevent setting inherited cipher suite config when TLS 1.3 is specified * changelog: add entry for converting agent config to TLS types * agent: remove FIXME in runtime test, this is covered in builder tests with invalid tls9 value now * tlsutil: remove config tests for values checked at agent config builder boundary * tlsutil: remove tls version check from loadProtocolConfig * tlsutil: remove tests and TODOs for logic checked in TestBuilder_tlsVersion and TestBuilder_tlsCipherSuites * website: update search link for supported Consul agent cipher suites * website: apply review suggestions for tls_min_version description * website: attempt to clean up markdown list formatting for tls_min_version * website: moar linebreaks to fix tls_min_version formatting * Revert "website: moar linebreaks to fix tls_min_version formatting" This reverts commit 38585927422f73ebf838a7663e566ac245f2a75c. * autoconfig: translate old values for TLSMinVersion * agent: rename var for translated value of deprecated TLS version value * Update agent/config/deprecated.go Co-authored-by: Dan Upton <daniel@floppy.co> * agent: fix lint issue * agent: fixup deprecated config test assertions for updated warning Co-authored-by: Dan Upton <daniel@floppy.co>
2022-03-24 19:32:25 +00:00
"tls_cipher_suites": "TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256,TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA",
"tls_min_version": "TLSv1_0",
Added new auto_encrypt.grpc_server_tls config option to control AutoTLS enabling of GRPC Server's TLS usage Fix for #14253 Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>
2022-08-24 16:31:38 +00:00
"verify_incoming": true,
"use_auto_cert": true
Support per-listener TLS configuration ⚙️ (#12504) Introduces the capability to configure TLS differently for Consul's listeners/ports (i.e. HTTPS, gRPC, and the internal multiplexed RPC port) which is useful in scenarios where you may want the HTTPS or gRPC interfaces to present a certificate signed by a well-known/public CA, rather than the certificate used for internal communication which must have a SAN in the form `server.<dc>.consul`.
2022-03-18 10:46:58 +00:00
}
},
agent: convert listener config to TLS types (#12522) * tlsutil: initial implementation of types/TLSVersion tlsutil: add test for parsing deprecated agent TLS version strings tlsutil: return TLSVersionInvalid with error tlsutil: start moving tlsutil cipher suite lookups over to types/tls tlsutil: rename tlsLookup to ParseTLSVersion, add cipherSuiteLookup agent: attempt to use types in runtime config agent: implement b.tlsVersion validation in config builder agent: fix tlsVersion nil check in builder tlsutil: update to renamed ParseTLSVersion and goTLSVersions tlsutil: fixup TestConfigurator_CommonTLSConfigTLSMinVersion tlsutil: disable invalid config parsing tests tlsutil: update tests auto_config: lookup old config strings from base.TLSMinVersion auto_config: update endpoint tests to use TLS types agent: update runtime_test to use TLS types agent: update TestRuntimeCinfig_Sanitize.golden agent: update config runtime tests to expect TLS types * website: update Consul agent tls_min_version values * agent: fixup TLS parsing and compilation errors * test: fixup lint issues in agent/config_runtime_test and tlsutil/config_test * tlsutil: add CHACHA20_POLY1305 cipher suites to goTLSCipherSuites * test: revert autoconfig tls min version fixtures to old format * types: add TLSVersions public function * agent: add warning for deprecated TLS version strings * agent: move agent config specific logic from tlsutil.ParseTLSVersion into agent config builder * tlsutil(BREAKING): change default TLS min version to TLS 1.2 * agent: move ParseCiphers logic from tlsutil into agent config builder * tlsutil: remove unused CipherString function * agent: fixup import for types package * Revert "tlsutil: remove unused CipherString function" This reverts commit 6ca7f6f58d268e617501b7db9500113c13bae70c. * agent: fixup config builder and runtime tests * tlsutil: fixup one remaining ListenerConfig -> ProtocolConfig * test: move TLS cipher suites parsing test from tlsutil into agent config builder tests * agent: remove parseCiphers helper from auto_config_endpoint_test * test: remove unused imports from tlsutil * agent: remove resolved FIXME comment * tlsutil: remove TODO and FIXME in cipher suite validation * agent: prevent setting inherited cipher suite config when TLS 1.3 is specified * changelog: add entry for converting agent config to TLS types * agent: remove FIXME in runtime test, this is covered in builder tests with invalid tls9 value now * tlsutil: remove config tests for values checked at agent config builder boundary * tlsutil: remove tls version check from loadProtocolConfig * tlsutil: remove tests and TODOs for logic checked in TestBuilder_tlsVersion and TestBuilder_tlsCipherSuites * website: update search link for supported Consul agent cipher suites * website: apply review suggestions for tls_min_version description * website: attempt to clean up markdown list formatting for tls_min_version * website: moar linebreaks to fix tls_min_version formatting * Revert "website: moar linebreaks to fix tls_min_version formatting" This reverts commit 38585927422f73ebf838a7663e566ac245f2a75c. * autoconfig: translate old values for TLSMinVersion * agent: rename var for translated value of deprecated TLS version value * Update agent/config/deprecated.go Co-authored-by: Dan Upton <daniel@floppy.co> * agent: fix lint issue * agent: fixup deprecated config test assertions for updated warning Co-authored-by: Dan Upton <daniel@floppy.co>
2022-03-24 19:32:25 +00:00
"tls_cipher_suites": "TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256",
"tls_min_version": "tls11",
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"tls_prefer_server_cipher_suites": true,
"translate_wan_addrs": true,
"ui_config": {
"dir": "pVncV4Ey",
"content_path": "qp1WRhYH",
"metrics_provider": "sgnaoa_lower_case",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"metrics_provider_files": [
"sgnaMFoa",
"dicnwkTH"
],
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"metrics_provider_options_json": "{\"DIbVQadX\": 1}",
"metrics_proxy": {
"base_url": "http://foo.bar",
"add_headers": [
{
"name": "p3nynwc9",
"value": "TYBgnN2F"
}
],
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"path_allowlist": [
"/aSh3cu",
"/eiK/2Th"
]
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
},
"dashboard_url_templates": {
"u2eziu2n_lower_case": "http://lkjasd.otr"
}
},
"unix_sockets": {
"group": "8pFodrV8",
"mode": "E8sAwOv4",
"user": "E0nB1DwA"
},
"verify_incoming": true,
"verify_incoming_https": true,
"verify_incoming_rpc": true,
"verify_outgoing": true,
"verify_server_hostname": true,
"watches": [
{
"type": "key",
"datacenter": "GyE6jpeW",
"key": "j9lF1Tve",
"handler": "90N7S4LN"
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
},
{
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
"type": "keyprefix",
"datacenter": "fYrl3F5d",
"key": "sl3Dffu7",
adding config for request_limits (#15531) * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
2022-12-13 20:09:55 +00:00
"args": [
"dltjDJ2a",
"flEa7C2d"
]
config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.
2020-12-21 21:18:03 +00:00
}
proxycfg: rate-limit delivery of config snapshots (#14960) Adds a user-configurable rate limiter to proxycfg snapshot delivery, with a default limit of 250 updates per second. This addresses a problem observed in our load testing of Consul Dataplane where updating a "global" resource such as a wildcard intention or the proxy-defaults config entry could starve the Raft or Memberlist goroutines of CPU time, causing general cluster instability.
2022-10-14 14:52:00 +00:00
],
"xds": {
"update_max_per_second": 9526.2
}
add http2 ping health checks (#8431) * add http2 ping checks * fix test issue * add h2ping check to config resources * add new test and docs for h2ping * fix grammatical inconsistency in H2PING documentation * resolve rebase conflicts, add test for h2ping tls verification failure * api documentation for h2ping * update test config data with H2PING * add H2PING to protocol buffers and update changelog * fix typo in changelog entry
2021-04-09 19:12:10 +00:00
}