open-consul/agent/consul/acl_test.go

3625 lines
97 KiB
Go
Raw Normal View History

2014-08-11 21:01:45 +00:00
package consul
import (
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
"fmt"
2014-08-11 21:01:45 +00:00
"os"
Creates new "prepared-query" ACL type and new token capture behavior. Prior to this change, prepared queries had the following behavior for ACLs, which will need to change to support templates: 1. A management token, or a token with read access to the service being queried needed to be provided in order to create a prepared query. 2. The token used to create the prepared query was stored with the query in the state store and used to execute the query. 3. A management token, or the token used to create the query needed to be supplied to perform and CRUD operations on an existing prepared query. This was pretty subtle and complicated behavior, and won't work for templates since the service name is computed at execution time. To solve this, we introduce a new "prepared-query" ACL type, where the prefix applies to the query name for static prepared query types and to the prefix for template prepared query types. With this change, the new behavior is: 1. A management token, or a token with "prepared-query" write access to the query name or (soon) the given template prefix is required to do any CRUD operations on a prepared query, or to list prepared queries (the list is filtered by this ACL). 2. You will no longer need a management token to list prepared queries, but you will only be able to see prepared queries that you have access to (you get an empty list instead of permission denied). 3. When listing or getting a query, because it was easy to capture management tokens given the past behavior, this will always blank out the "Token" field (replacing the contents as <hidden>) for all tokens unless a management token is supplied. Going forward, we should discourage people from binding tokens for execution unless strictly necessary. 4. No token will be captured by default when a prepared query is created. If the user wishes to supply an execution token then can pass it in via the "Token" field in the prepared query definition. Otherwise, this field will default to empty. 5. At execution time, we will use the captured token if it exists with the prepared query definition, otherwise we will use the token that's passed in with the request, just like we do for other RPCs (or you can use the agent's configured token for DNS). 6. Prepared queries with no name (accessible only by ID) will not require ACLs to create or modify (execution time will depend on the service ACL configuration). Our argument here is that these are designed to be ephemeral and the IDs are as good as an ACL. Management tokens will be able to list all of these. These changes enable templates, but also enable delegation of authority to manage the prepared query namespace.
2016-02-23 08:12:58 +00:00
"reflect"
"strings"
"sync/atomic"
2014-08-11 21:01:45 +00:00
"testing"
"time"
2014-08-11 21:01:45 +00:00
"github.com/hashicorp/consul/acl"
"github.com/hashicorp/consul/agent/structs"
"github.com/hashicorp/consul/sdk/testutil"
"github.com/hashicorp/consul/sdk/testutil/retry"
"github.com/stretchr/testify/assert"
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
"github.com/stretchr/testify/require"
2014-08-11 21:01:45 +00:00
)
var testACLPolicy = `
key "" {
policy = "deny"
}
key "foo/" {
policy = "write"
}
`
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
var testACLPolicyNew = `
key_prefix "" {
policy = "deny"
}
key_prefix "foo/" {
policy = "write"
}
`
2014-08-11 21:01:45 +00:00
type asyncResolutionResult struct {
authz acl.Authorizer
err error
}
func verifyAuthorizerChain(t *testing.T, expected acl.Authorizer, actual acl.Authorizer) {
expectedChainAuthz, ok := expected.(*acl.ChainedAuthorizer)
require.True(t, ok, "expected Authorizer is not a ChainedAuthorizer")
actualChainAuthz, ok := actual.(*acl.ChainedAuthorizer)
require.True(t, ok, "actual Authorizer is not a ChainedAuthorizer")
expectedChain := expectedChainAuthz.AuthorizerChain()
actualChain := actualChainAuthz.AuthorizerChain()
require.Equal(t, len(expectedChain), len(actualChain), "ChainedAuthorizers have different length chains")
for idx, expectedAuthz := range expectedChain {
actualAuthz := actualChain[idx]
// pointer equality - because we want to verify authorizer reuse
require.True(t, expectedAuthz == actualAuthz, "Authorizer pointers are not equal")
}
}
func resolveTokenAsync(r *ACLResolver, token string, ch chan *asyncResolutionResult) {
authz, err := r.ResolveToken(token)
ch <- &asyncResolutionResult{authz: authz, err: err}
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func testIdentityForToken(token string) (bool, structs.ACLIdentity, error) {
switch token {
case "missing-policy":
return true, &structs.ACLToken{
AccessorID: "435a75af-1763-4980-89f4-f0951dda53b4",
SecretID: "b1b6be70-ed2e-4c80-8495-bdb3db110b1e",
Policies: []structs.ACLTokenPolicyLink{
structs.ACLTokenPolicyLink{
ID: "not-found",
},
structs.ACLTokenPolicyLink{
ID: "acl-ro",
},
},
}, nil
case "missing-role":
return true, &structs.ACLToken{
AccessorID: "435a75af-1763-4980-89f4-f0951dda53b4",
SecretID: "b1b6be70-ed2e-4c80-8495-bdb3db110b1e",
Roles: []structs.ACLTokenRoleLink{
structs.ACLTokenRoleLink{
ID: "not-found",
},
structs.ACLTokenRoleLink{
ID: "acl-ro",
},
},
}, nil
case "missing-policy-on-role":
return true, &structs.ACLToken{
AccessorID: "435a75af-1763-4980-89f4-f0951dda53b4",
SecretID: "b1b6be70-ed2e-4c80-8495-bdb3db110b1e",
Roles: []structs.ACLTokenRoleLink{
structs.ACLTokenRoleLink{
ID: "missing-policy",
},
},
}, nil
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
case "legacy-management":
return true, &structs.ACLToken{
AccessorID: "d109a033-99d1-47e2-a711-d6593373a973",
SecretID: "415cd1e1-1493-4fb4-827d-d762ed9cfe7c",
Type: structs.ACLTokenTypeManagement,
}, nil
case "legacy-client":
return true, &structs.ACLToken{
AccessorID: "b7375838-b104-4a25-b457-329d939bf257",
SecretID: "03f49328-c23c-4b26-92a2-3b898332400d",
Type: structs.ACLTokenTypeClient,
Rules: `service "" { policy = "read" }`,
}, nil
case "found":
return true, &structs.ACLToken{
AccessorID: "5f57c1f6-6a89-4186-9445-531b316e01df",
SecretID: "a1a54629-5050-4d17-8a4e-560d2423f835",
Policies: []structs.ACLTokenPolicyLink{
structs.ACLTokenPolicyLink{
ID: "node-wr",
},
structs.ACLTokenPolicyLink{
ID: "dc2-key-wr",
},
},
}, nil
case "found-role":
// This should be permission-wise identical to "found", except it
// gets it's policies indirectly by way of a Role.
return true, &structs.ACLToken{
AccessorID: "5f57c1f6-6a89-4186-9445-531b316e01df",
SecretID: "a1a54629-5050-4d17-8a4e-560d2423f835",
Roles: []structs.ACLTokenRoleLink{
structs.ACLTokenRoleLink{
ID: "found",
},
},
}, nil
case "found-policy-and-role":
return true, &structs.ACLToken{
AccessorID: "5f57c1f6-6a89-4186-9445-531b316e01df",
SecretID: "a1a54629-5050-4d17-8a4e-560d2423f835",
Policies: []structs.ACLTokenPolicyLink{
structs.ACLTokenPolicyLink{
ID: "node-wr",
},
structs.ACLTokenPolicyLink{
ID: "dc2-key-wr",
},
},
Roles: []structs.ACLTokenRoleLink{
structs.ACLTokenRoleLink{
ID: "service-ro",
},
},
}, nil
case "found-synthetic-policy-1":
return true, &structs.ACLToken{
AccessorID: "f6c5a5fb-4da4-422b-9abf-2c942813fc71",
SecretID: "55cb7d69-2bea-42c3-a68f-2a1443d2abbc",
ServiceIdentities: []*structs.ACLServiceIdentity{
&structs.ACLServiceIdentity{
ServiceName: "service1",
},
},
}, nil
case "found-synthetic-policy-2":
return true, &structs.ACLToken{
AccessorID: "7c87dfad-be37-446e-8305-299585677cb5",
SecretID: "dfca9676-ac80-453a-837b-4c0cf923473c",
ServiceIdentities: []*structs.ACLServiceIdentity{
&structs.ACLServiceIdentity{
ServiceName: "service2",
},
},
}, nil
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
case "acl-ro":
return true, &structs.ACLToken{
AccessorID: "435a75af-1763-4980-89f4-f0951dda53b4",
SecretID: "b1b6be70-ed2e-4c80-8495-bdb3db110b1e",
Policies: []structs.ACLTokenPolicyLink{
structs.ACLTokenPolicyLink{
ID: "acl-ro",
},
},
}, nil
case "acl-wr":
return true, &structs.ACLToken{
AccessorID: "435a75af-1763-4980-89f4-f0951dda53b4",
SecretID: "b1b6be70-ed2e-4c80-8495-bdb3db110b1e",
Policies: []structs.ACLTokenPolicyLink{
structs.ACLTokenPolicyLink{
ID: "acl-wr",
},
},
}, nil
case "racey-unmodified":
return true, &structs.ACLToken{
AccessorID: "5f57c1f6-6a89-4186-9445-531b316e01df",
SecretID: "a1a54629-5050-4d17-8a4e-560d2423f835",
Policies: []structs.ACLTokenPolicyLink{
structs.ACLTokenPolicyLink{
ID: "node-wr",
},
structs.ACLTokenPolicyLink{
ID: "acl-wr",
},
},
}, nil
case "racey-modified":
return true, &structs.ACLToken{
AccessorID: "5f57c1f6-6a89-4186-9445-531b316e01df",
SecretID: "a1a54629-5050-4d17-8a4e-560d2423f835",
Policies: []structs.ACLTokenPolicyLink{
structs.ACLTokenPolicyLink{
ID: "node-wr",
},
},
}, nil
acl: reduce complexity of token resolution process with alternative singleflighting (#5480) acl: reduce complexity of token resolution process with alternative singleflighting Switches acl resolution to use golang.org/x/sync/singleflight. For the identity/legacy lookups this is a drop-in replacement with the same overall approach to request coalescing. For policies this is technically a change in behavior, but when considered holistically is approximately performance neutral (with the benefit of less code). There are two goals with this blob of code (speaking specifically of policy resolution here): 1) Minimize cross-DC requests. 2) Minimize client-to-server LAN requests. The previous iteration of this code was optimizing for the case of many possibly different tokens being resolved concurrently that have a significant overlap in linked policies such that deduplication would be worth the complexity. While this is laudable there are some things to consider that can help to adjust expectations: 1) For v1.4+ policies are always replicated, and once a single policy shows up in a secondary DC the replicated data is considered authoritative for requests made in that DC. This means that our earlier concerns about minimizing cross-DC requests are irrelevant because there will be no cross-DC policy reads that occur. 2) For Server nodes the in-memory ACL policy cache is capped at zero, meaning it has no caching. Only Client nodes run with a cache. This means that instead of having an entire DC's worth of tokens (what a Server might see) that can have policy resolutions coalesced these nodes will only ever be seeing node-local token resolutions. In a reasonable worst-case scenario where a scheduler like Kubernetes has "filled" a node with Connect services, even that will only schedule ~100 connect services per node. If every service has a unique token there will only be 100 tokens to coalesce and even then those requests have to occur concurrently AND be hitting an empty consul cache. Instead of seeing a great coalescing opportunity for cutting down on redundant Policy resolutions, in practice it's far more likely given node densities that you'd see requests for the same token concurrently than you would for two tokens sharing a policy concurrently (to a degree that would warrant the overhead of the current variation of singleflighting. Given that, this patch switches the Policy resolution process to only singleflight by requesting token (but keeps the cache as by-policy).
2019-03-14 14:35:34 +00:00
case "concurrent-resolve":
return true, &structs.ACLToken{
AccessorID: "5f57c1f6-6a89-4186-9445-531b316e01df",
SecretID: "a1a54629-5050-4d17-8a4e-560d2423f835",
Policies: []structs.ACLTokenPolicyLink{
structs.ACLTokenPolicyLink{
ID: "node-wr",
},
structs.ACLTokenPolicyLink{
ID: "acl-wr",
},
},
}, nil
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
case anonymousToken:
return true, &structs.ACLToken{
AccessorID: "00000000-0000-0000-0000-000000000002",
SecretID: anonymousToken,
Policies: []structs.ACLTokenPolicyLink{
structs.ACLTokenPolicyLink{
ID: "node-wr",
},
},
}, nil
default:
return testIdentityForTokenEnterprise(token)
2014-08-11 21:01:45 +00:00
}
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func testPolicyForID(policyID string) (bool, *structs.ACLPolicy, error) {
switch policyID {
case "acl-ro":
return true, &structs.ACLPolicy{
ID: "acl-ro",
Name: "acl-ro",
Description: "acl-ro",
Rules: `acl = "read"`,
Syntax: acl.SyntaxCurrent,
RaftIndex: structs.RaftIndex{CreateIndex: 1, ModifyIndex: 2},
}, nil
case "acl-wr":
return true, &structs.ACLPolicy{
ID: "acl-wr",
Name: "acl-wr",
Description: "acl-wr",
Rules: `acl = "write"`,
Syntax: acl.SyntaxCurrent,
RaftIndex: structs.RaftIndex{CreateIndex: 1, ModifyIndex: 2},
}, nil
case "service-ro":
return true, &structs.ACLPolicy{
ID: "service-ro",
Name: "service-ro",
Description: "service-ro",
Rules: `service_prefix "" { policy = "read" }`,
Syntax: acl.SyntaxCurrent,
RaftIndex: structs.RaftIndex{CreateIndex: 1, ModifyIndex: 2},
}, nil
case "service-wr":
return true, &structs.ACLPolicy{
ID: "service-wr",
Name: "service-wr",
Description: "service-wr",
Rules: `service_prefix "" { policy = "write" }`,
Syntax: acl.SyntaxCurrent,
RaftIndex: structs.RaftIndex{CreateIndex: 1, ModifyIndex: 2},
}, nil
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
case "node-wr":
return true, &structs.ACLPolicy{
ID: "node-wr",
Name: "node-wr",
Description: "node-wr",
Rules: `node_prefix "" { policy = "write"}`,
Syntax: acl.SyntaxCurrent,
Datacenters: []string{"dc1"},
RaftIndex: structs.RaftIndex{CreateIndex: 1, ModifyIndex: 2},
}, nil
case "dc2-key-wr":
return true, &structs.ACLPolicy{
ID: "dc2-key-wr",
Name: "dc2-key-wr",
Description: "dc2-key-wr",
Rules: `key_prefix "" { policy = "write"}`,
Syntax: acl.SyntaxCurrent,
Datacenters: []string{"dc2"},
RaftIndex: structs.RaftIndex{CreateIndex: 1, ModifyIndex: 2},
}, nil
default:
return testPolicyForIDEnterprise(policyID)
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
}
func testRoleForID(roleID string) (bool, *structs.ACLRole, error) {
switch roleID {
case "service-ro":
return true, &structs.ACLRole{
ID: "service-ro",
Name: "service-ro",
Description: "service-ro",
Policies: []structs.ACLRolePolicyLink{
structs.ACLRolePolicyLink{
ID: "service-ro",
},
},
RaftIndex: structs.RaftIndex{CreateIndex: 1, ModifyIndex: 2},
}, nil
case "service-wr":
return true, &structs.ACLRole{
ID: "service-wr",
Name: "service-wr",
Description: "service-wr",
Policies: []structs.ACLRolePolicyLink{
structs.ACLRolePolicyLink{
ID: "service-wr",
},
},
RaftIndex: structs.RaftIndex{CreateIndex: 1, ModifyIndex: 2},
}, nil
case "missing-policy":
return true, &structs.ACLRole{
ID: "missing-policy",
Name: "missing-policy",
Description: "missing-policy",
Policies: []structs.ACLRolePolicyLink{
structs.ACLRolePolicyLink{
ID: "not-found",
},
structs.ACLRolePolicyLink{
ID: "acl-ro",
},
},
RaftIndex: structs.RaftIndex{CreateIndex: 1, ModifyIndex: 2},
}, nil
case "found":
return true, &structs.ACLRole{
ID: "found",
Name: "found",
Description: "found",
Policies: []structs.ACLRolePolicyLink{
structs.ACLRolePolicyLink{
ID: "node-wr",
},
structs.ACLRolePolicyLink{
ID: "dc2-key-wr",
},
},
}, nil
case "acl-ro":
return true, &structs.ACLRole{
ID: "acl-ro",
Name: "acl-ro",
Description: "acl-ro",
Policies: []structs.ACLRolePolicyLink{
structs.ACLRolePolicyLink{
ID: "acl-ro",
},
},
}, nil
case "acl-wr":
return true, &structs.ACLRole{
ID: "acl-rw",
Name: "acl-rw",
Description: "acl-rw",
Policies: []structs.ACLRolePolicyLink{
structs.ACLRolePolicyLink{
ID: "acl-wr",
},
},
}, nil
case "racey-unmodified":
return true, &structs.ACLRole{
ID: "racey-unmodified",
Name: "racey-unmodified",
Description: "racey-unmodified",
Policies: []structs.ACLRolePolicyLink{
structs.ACLRolePolicyLink{
ID: "node-wr",
},
structs.ACLRolePolicyLink{
ID: "acl-wr",
},
},
}, nil
case "racey-modified":
return true, &structs.ACLRole{
ID: "racey-modified",
Name: "racey-modified",
Description: "racey-modified",
Policies: []structs.ACLRolePolicyLink{
structs.ACLRolePolicyLink{
ID: "node-wr",
},
},
}, nil
case "concurrent-resolve-1":
return true, &structs.ACLRole{
ID: "concurrent-resolve-1",
Name: "concurrent-resolve-1",
Description: "concurrent-resolve-1",
Policies: []structs.ACLRolePolicyLink{
structs.ACLRolePolicyLink{
ID: "node-wr",
},
structs.ACLRolePolicyLink{
ID: "acl-wr",
},
},
}, nil
case "concurrent-resolve-2":
return true, &structs.ACLRole{
ID: "concurrent-resolve-2",
Name: "concurrent-resolve-2",
Description: "concurrent-resolve-2",
Policies: []structs.ACLRolePolicyLink{
structs.ACLRolePolicyLink{
ID: "node-wr",
},
structs.ACLRolePolicyLink{
ID: "acl-wr",
},
},
}, nil
default:
return testRoleForIDEnterprise(roleID)
}
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// ACLResolverTestDelegate is used to test
// the ACLResolver without running Agents
type ACLResolverTestDelegate struct {
enabled bool
datacenter string
legacy bool
localTokens bool
localPolicies bool
localRoles bool
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
getPolicyFn func(*structs.ACLPolicyResolveLegacyRequest, *structs.ACLPolicyResolveLegacyResponse) error
tokenReadFn func(*structs.ACLTokenGetRequest, *structs.ACLTokenResponse) error
policyResolveFn func(*structs.ACLPolicyBatchGetRequest, *structs.ACLPolicyBatchResponse) error
roleResolveFn func(*structs.ACLRoleBatchGetRequest, *structs.ACLRoleBatchResponse) error
// state for the optional default resolver function defaultTokenReadFn
tokenCached bool
// state for the optional default resolver function defaultPolicyResolveFn
policyCached bool
// state for the optional default resolver function defaultRoleResolveFn
roleCached bool
EnterpriseACLResolverTestDelegate
}
func (d *ACLResolverTestDelegate) Reset() {
d.tokenCached = false
d.policyCached = false
d.roleCached = false
}
var errRPC = fmt.Errorf("Induced RPC Error")
func (d *ACLResolverTestDelegate) defaultTokenReadFn(errAfterCached error) func(*structs.ACLTokenGetRequest, *structs.ACLTokenResponse) error {
return func(args *structs.ACLTokenGetRequest, reply *structs.ACLTokenResponse) error {
if !d.tokenCached {
err := d.plainTokenReadFn(args, reply)
d.tokenCached = true
return err
}
return errAfterCached
}
}
func (d *ACLResolverTestDelegate) plainTokenReadFn(args *structs.ACLTokenGetRequest, reply *structs.ACLTokenResponse) error {
_, token, err := testIdentityForToken(args.TokenID)
if token != nil {
reply.Token = token.(*structs.ACLToken)
}
return err
}
func (d *ACLResolverTestDelegate) defaultPolicyResolveFn(errAfterCached error) func(*structs.ACLPolicyBatchGetRequest, *structs.ACLPolicyBatchResponse) error {
return func(args *structs.ACLPolicyBatchGetRequest, reply *structs.ACLPolicyBatchResponse) error {
if !d.policyCached {
err := d.plainPolicyResolveFn(args, reply)
d.policyCached = true
return err
}
return errAfterCached
}
}
func (d *ACLResolverTestDelegate) plainPolicyResolveFn(args *structs.ACLPolicyBatchGetRequest, reply *structs.ACLPolicyBatchResponse) error {
// TODO: if we were being super correct about it, we'd verify the token first
// TODO: and possibly return a not-found or permission-denied here
for _, policyID := range args.PolicyIDs {
_, policy, _ := testPolicyForID(policyID)
if policy != nil {
reply.Policies = append(reply.Policies, policy)
}
}
return nil
}
func (d *ACLResolverTestDelegate) defaultRoleResolveFn(errAfterCached error) func(*structs.ACLRoleBatchGetRequest, *structs.ACLRoleBatchResponse) error {
return func(args *structs.ACLRoleBatchGetRequest, reply *structs.ACLRoleBatchResponse) error {
if !d.roleCached {
err := d.plainRoleResolveFn(args, reply)
d.roleCached = true
return err
}
return errAfterCached
}
}
// plainRoleResolveFn tries to follow the normal logic of ACL.RoleResolve using
// the test fixtures.
func (d *ACLResolverTestDelegate) plainRoleResolveFn(args *structs.ACLRoleBatchGetRequest, reply *structs.ACLRoleBatchResponse) error {
// TODO: if we were being super correct about it, we'd verify the token first
// TODO: and possibly return a not-found or permission-denied here
for _, roleID := range args.RoleIDs {
_, role, _ := testRoleForID(roleID)
if role != nil {
reply.Roles = append(reply.Roles, role)
}
}
return nil
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func (d *ACLResolverTestDelegate) ACLsEnabled() bool {
return d.enabled
}
2014-08-11 21:01:45 +00:00
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func (d *ACLResolverTestDelegate) ACLDatacenter(legacy bool) string {
return d.datacenter
}
2014-08-11 21:01:45 +00:00
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func (d *ACLResolverTestDelegate) UseLegacyACLs() bool {
return d.legacy
2014-08-11 21:01:45 +00:00
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func (d *ACLResolverTestDelegate) ResolveIdentityFromToken(token string) (bool, structs.ACLIdentity, error) {
if !d.localTokens {
return false, nil, nil
}
2014-08-11 21:01:45 +00:00
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
return testIdentityForToken(token)
}
2014-08-11 21:01:45 +00:00
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func (d *ACLResolverTestDelegate) ResolvePolicyFromID(policyID string) (bool, *structs.ACLPolicy, error) {
if !d.localPolicies {
return false, nil, nil
2014-08-11 21:01:45 +00:00
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
return testPolicyForID(policyID)
}
2014-08-11 21:01:45 +00:00
func (d *ACLResolverTestDelegate) ResolveRoleFromID(roleID string) (bool, *structs.ACLRole, error) {
if !d.localRoles {
return false, nil, nil
}
return testRoleForID(roleID)
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func (d *ACLResolverTestDelegate) RPC(method string, args interface{}, reply interface{}) error {
switch method {
case "ACL.GetPolicy":
if d.getPolicyFn != nil {
return d.getPolicyFn(args.(*structs.ACLPolicyResolveLegacyRequest), reply.(*structs.ACLPolicyResolveLegacyResponse))
}
panic("Bad Test Implementation: should provide a getPolicyFn to the ACLResolverTestDelegate")
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
case "ACL.TokenRead":
if d.tokenReadFn != nil {
return d.tokenReadFn(args.(*structs.ACLTokenGetRequest), reply.(*structs.ACLTokenResponse))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
}
panic("Bad Test Implementation: should provide a tokenReadFn to the ACLResolverTestDelegate")
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
case "ACL.PolicyResolve":
if d.policyResolveFn != nil {
return d.policyResolveFn(args.(*structs.ACLPolicyBatchGetRequest), reply.(*structs.ACLPolicyBatchResponse))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
}
panic("Bad Test Implementation: should provide a policyResolveFn to the ACLResolverTestDelegate")
case "ACL.RoleResolve":
if d.roleResolveFn != nil {
return d.roleResolveFn(args.(*structs.ACLRoleBatchGetRequest), reply.(*structs.ACLRoleBatchResponse))
}
panic("Bad Test Implementation: should provide a roleResolveFn to the ACLResolverTestDelegate")
2014-08-11 21:01:45 +00:00
}
if handled, err := d.EnterpriseACLResolverTestDelegate.RPC(method, args, reply); handled {
return err
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
panic("Bad Test Implementation: Was the ACLResolver updated to use new RPC methods")
2014-08-11 21:01:45 +00:00
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func newTestACLResolver(t *testing.T, delegate ACLResolverDelegate, cb func(*ACLResolverConfig)) *ACLResolver {
config := DefaultConfig()
config.ACLDefaultPolicy = "deny"
config.ACLDownPolicy = "extend-cache"
rconf := &ACLResolverConfig{
Config: config,
Logger: testutil.TestLoggerWithName(t, t.Name()),
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
CacheConfig: &structs.ACLCachesConfig{
Identities: 4,
Policies: 4,
ParsedPolicies: 4,
Authorizers: 4,
Roles: 4,
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
},
AutoDisable: true,
Delegate: delegate,
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
if cb != nil {
cb(rconf)
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
resolver, err := NewACLResolver(rconf)
require.NoError(t, err)
return resolver
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func TestACLResolver_Disabled(t *testing.T) {
t.Parallel()
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
delegate := &ACLResolverTestDelegate{
enabled: false,
datacenter: "dc1",
legacy: false,
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
r := newTestACLResolver(t, delegate, nil)
authz, err := r.ResolveToken("does not exist")
require.Nil(t, authz)
require.Nil(t, err)
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func TestACLResolver_ResolveRootACL(t *testing.T) {
t.Parallel()
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
}
r := newTestACLResolver(t, delegate, nil)
t.Run("Allow", func(t *testing.T) {
authz, err := r.ResolveToken("allow")
require.Nil(t, authz)
require.Error(t, err)
require.True(t, acl.IsErrRootDenied(err))
2014-08-12 17:38:57 +00:00
})
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Run("Deny", func(t *testing.T) {
authz, err := r.ResolveToken("deny")
require.Nil(t, authz)
require.Error(t, err)
require.True(t, acl.IsErrRootDenied(err))
})
2014-08-12 17:38:57 +00:00
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Run("Manage", func(t *testing.T) {
authz, err := r.ResolveToken("manage")
require.Nil(t, authz)
require.Error(t, err)
require.True(t, acl.IsErrRootDenied(err))
})
2014-08-12 17:38:57 +00:00
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func TestACLResolver_DownPolicy(t *testing.T) {
t.Parallel()
2014-08-11 21:01:45 +00:00
requireIdentityCached := func(t *testing.T, r *ACLResolver, token string, present bool, msg string) {
t.Helper()
cacheVal := r.cache.GetIdentity(token)
require.NotNil(t, cacheVal)
if present {
require.NotNil(t, cacheVal.Identity, msg)
} else {
require.Nil(t, cacheVal.Identity, msg)
}
}
requirePolicyCached := func(t *testing.T, r *ACLResolver, policyID string, present bool, msg string) {
t.Helper()
cacheVal := r.cache.GetPolicy(policyID)
require.NotNil(t, cacheVal)
if present {
require.NotNil(t, cacheVal.Policy, msg)
} else {
require.Nil(t, cacheVal.Policy, msg)
}
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Run("Deny", func(t *testing.T) {
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: false,
localPolicies: true,
localRoles: true,
tokenReadFn: func(*structs.ACLTokenGetRequest, *structs.ACLTokenResponse) error {
return errRPC
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
},
}
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "deny"
})
authz, err := r.ResolveToken("foo")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, authz, acl.DenyAll())
requireIdentityCached(t, r, "foo", false, "not present")
2014-08-11 21:01:45 +00:00
})
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Run("Allow", func(t *testing.T) {
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: false,
localPolicies: true,
localRoles: true,
tokenReadFn: func(*structs.ACLTokenGetRequest, *structs.ACLTokenResponse) error {
return errRPC
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
},
}
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "allow"
})
2014-08-11 21:01:45 +00:00
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("foo")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, authz, acl.AllowAll())
requireIdentityCached(t, r, "foo", false, "not present")
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
2014-08-11 21:01:45 +00:00
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Run("Expired-Policy", func(t *testing.T) {
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: true,
localPolicies: false,
localRoles: false,
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
}
delegate.policyResolveFn = delegate.defaultPolicyResolveFn(errRPC)
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "deny"
config.Config.ACLPolicyTTL = 0
config.Config.ACLRoleTTL = 0
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
2014-08-11 21:01:45 +00:00
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("found")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
requirePolicyCached(t, r, "node-wr", true, "cached") // from "found" token
requirePolicyCached(t, r, "dc2-key-wr", true, "cached") // from "found" token
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// policy cache expired - so we will fail to resolve that policy and use the default policy only
authz2, err := r.ResolveToken("found")
require.NoError(t, err)
require.NotNil(t, authz2)
require.NotEqual(t, authz, authz2)
require.Equal(t, acl.Deny, authz2.NodeWrite("foo", nil))
requirePolicyCached(t, r, "node-wr", false, "expired") // from "found" token
requirePolicyCached(t, r, "dc2-key-wr", false, "expired") // from "found" token
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
2014-08-11 21:01:45 +00:00
t.Run("Expired-Role", func(t *testing.T) {
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: true,
localPolicies: false,
localRoles: false,
}
delegate.policyResolveFn = delegate.defaultPolicyResolveFn(errRPC)
delegate.roleResolveFn = delegate.defaultRoleResolveFn(errRPC)
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "deny"
config.Config.ACLPolicyTTL = 0
config.Config.ACLRoleTTL = 0
})
authz, err := r.ResolveToken("found-role")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
// role cache expired - so we will fail to resolve that role and use the default policy only
authz2, err := r.ResolveToken("found-role")
require.NoError(t, err)
require.NotNil(t, authz2)
require.False(t, authz == authz2)
require.Equal(t, acl.Deny, authz2.NodeWrite("foo", nil))
})
t.Run("Extend-Cache-Policy", func(t *testing.T) {
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: false,
localPolicies: true,
localRoles: true,
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
}
delegate.tokenReadFn = delegate.defaultTokenReadFn(errRPC)
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "extend-cache"
config.Config.ACLTokenTTL = 0
})
authz, err := r.ResolveToken("found")
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
requireIdentityCached(t, r, "found", true, "cached")
authz2, err := r.ResolveToken("found")
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
require.NoError(t, err)
require.NotNil(t, authz2)
verifyAuthorizerChain(t, authz, authz2)
require.Equal(t, acl.Allow, authz2.NodeWrite("foo", nil))
})
t.Run("Extend-Cache-Role", func(t *testing.T) {
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: false,
localPolicies: true,
localRoles: true,
}
delegate.tokenReadFn = delegate.defaultTokenReadFn(errRPC)
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "extend-cache"
config.Config.ACLTokenTTL = 0
})
authz, err := r.ResolveToken("found-role")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
requireIdentityCached(t, r, "found-role", true, "still cached")
authz2, err := r.ResolveToken("found-role")
require.NoError(t, err)
require.NotNil(t, authz2)
// testing pointer equality - these will be the same object because it is cached.
verifyAuthorizerChain(t, authz, authz2)
require.Equal(t, acl.Allow, authz2.NodeWrite("foo", nil))
2014-08-11 21:01:45 +00:00
})
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Run("Extend-Cache-Expired-Policy", func(t *testing.T) {
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: true,
localPolicies: false,
localRoles: false,
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
}
delegate.policyResolveFn = delegate.defaultPolicyResolveFn(errRPC)
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "extend-cache"
config.Config.ACLPolicyTTL = 0
config.Config.ACLRoleTTL = 0
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
authz, err := r.ResolveToken("found")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
requirePolicyCached(t, r, "node-wr", true, "cached") // from "found" token
requirePolicyCached(t, r, "dc2-key-wr", true, "cached") // from "found" token
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// Will just use the policy cache
authz2, err := r.ResolveToken("found")
require.NoError(t, err)
require.NotNil(t, authz2)
verifyAuthorizerChain(t, authz, authz2)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
requirePolicyCached(t, r, "node-wr", true, "still cached") // from "found" token
requirePolicyCached(t, r, "dc2-key-wr", true, "still cached") // from "found" token
2014-08-11 21:01:45 +00:00
})
t.Run("Extend-Cache-Expired-Role", func(t *testing.T) {
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: true,
localPolicies: false,
localRoles: false,
}
delegate.policyResolveFn = delegate.defaultPolicyResolveFn(errRPC)
delegate.roleResolveFn = delegate.defaultRoleResolveFn(errRPC)
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "extend-cache"
config.Config.ACLPolicyTTL = 0
config.Config.ACLRoleTTL = 0
})
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("found-role")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
// Will just use the policy cache
authz2, err := r.ResolveToken("found-role")
require.NoError(t, err)
require.NotNil(t, authz2)
verifyAuthorizerChain(t, authz, authz2)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
})
t.Run("Async-Cache-Expired-Policy", func(t *testing.T) {
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: true,
localPolicies: false,
localRoles: false,
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
}
// We don't need to return acl.ErrNotFound here but we could. The ACLResolver will search for any
// policies not in the response and emit an ACL not found for any not-found within the result set.
delegate.policyResolveFn = delegate.defaultPolicyResolveFn(nil)
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "async-cache"
config.Config.ACLPolicyTTL = 0
config.Config.ACLRoleTTL = 0
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
2014-08-11 21:01:45 +00:00
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("found")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
requirePolicyCached(t, r, "node-wr", true, "cached") // from "found" token
requirePolicyCached(t, r, "dc2-key-wr", true, "cached") // from "found" token
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// The identity should have been cached so this should still be valid
authz2, err := r.ResolveToken("found")
require.NoError(t, err)
require.NotNil(t, authz2)
// testing pointer equality - these will be the same object because it is cached.
verifyAuthorizerChain(t, authz, authz2)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// the go routine spawned will eventually return with a authz that doesn't have the policy
retry.Run(t, func(t *retry.R) {
authz3, err := r.ResolveToken("found")
assert.NoError(t, err)
assert.NotNil(t, authz3)
assert.Equal(t, acl.Deny, authz3.NodeWrite("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
requirePolicyCached(t, r, "node-wr", false, "no longer cached") // from "found" token
requirePolicyCached(t, r, "dc2-key-wr", false, "no longer cached") // from "found" token
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
2014-08-11 21:01:45 +00:00
t.Run("Async-Cache-Expired-Role", func(t *testing.T) {
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: true,
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
localPolicies: false,
localRoles: false,
}
// We don't need to return acl.ErrNotFound here but we could. The ACLResolver will search for any
// policies not in the response and emit an ACL not found for any not-found within the result set.
delegate.policyResolveFn = delegate.defaultPolicyResolveFn(nil)
delegate.roleResolveFn = delegate.defaultRoleResolveFn(nil)
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "async-cache"
config.Config.ACLPolicyTTL = 0
config.Config.ACLRoleTTL = 0
})
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("found-role")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
// The identity should have been cached so this should still be valid
authz2, err := r.ResolveToken("found-role")
require.NoError(t, err)
require.NotNil(t, authz2)
// testing pointer equality - these will be the same object because it is cached.
verifyAuthorizerChain(t, authz, authz2)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
// the go routine spawned will eventually return with a authz that doesn't have the policy
retry.Run(t, func(t *retry.R) {
authz3, err := r.ResolveToken("found-role")
assert.NoError(t, err)
assert.NotNil(t, authz3)
assert.Equal(t, acl.Deny, authz3.NodeWrite("foo", nil))
})
})
t.Run("Extend-Cache-Client-Policy", func(t *testing.T) {
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: false,
localPolicies: false,
localRoles: false,
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
}
delegate.tokenReadFn = delegate.defaultTokenReadFn(errRPC)
delegate.policyResolveFn = delegate.defaultPolicyResolveFn(errRPC)
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "extend-cache"
config.Config.ACLTokenTTL = 0
config.Config.ACLPolicyTTL = 0
config.Config.ACLRoleTTL = 0
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
2014-08-11 21:01:45 +00:00
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("found")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
requirePolicyCached(t, r, "node-wr", true, "cached") // from "found" token
requirePolicyCached(t, r, "dc2-key-wr", true, "cached") // from "found" token
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz2, err := r.ResolveToken("found")
require.NoError(t, err)
require.NotNil(t, authz2)
// testing pointer equality - these will be the same object because it is cached.
verifyAuthorizerChain(t, authz, authz2)
require.Equal(t, acl.Allow, authz2.NodeWrite("foo", nil))
})
t.Run("Extend-Cache-Client-Role", func(t *testing.T) {
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: false,
localPolicies: false,
localRoles: false,
}
delegate.tokenReadFn = delegate.defaultTokenReadFn(errRPC)
delegate.policyResolveFn = delegate.defaultPolicyResolveFn(errRPC)
delegate.roleResolveFn = delegate.defaultRoleResolveFn(errRPC)
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "extend-cache"
config.Config.ACLTokenTTL = 0
config.Config.ACLPolicyTTL = 0
config.Config.ACLRoleTTL = 0
})
authz, err := r.ResolveToken("found-role")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
requirePolicyCached(t, r, "node-wr", true, "still cached") // from "found" token
requirePolicyCached(t, r, "dc2-key-wr", true, "still cached") // from "found" token
authz2, err := r.ResolveToken("found-role")
require.NoError(t, err)
require.NotNil(t, authz2)
// testing pointer equality - these will be the same object because it is cached.
verifyAuthorizerChain(t, authz, authz2)
require.Equal(t, acl.Allow, authz2.NodeWrite("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
2014-08-11 21:01:45 +00:00
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Run("Async-Cache", func(t *testing.T) {
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: false,
localPolicies: true,
localRoles: true,
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
}
delegate.tokenReadFn = delegate.defaultTokenReadFn(acl.ErrNotFound)
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "async-cache"
config.Config.ACLTokenTTL = 0
})
2014-08-11 21:01:45 +00:00
authz, err := r.ResolveToken("found")
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
requireIdentityCached(t, r, "found", true, "cached")
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// The identity should have been cached so this should still be valid
authz2, err := r.ResolveToken("found")
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
require.NoError(t, err)
require.NotNil(t, authz2)
verifyAuthorizerChain(t, authz, authz2)
require.Equal(t, acl.Allow, authz2.NodeWrite("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// the go routine spawned will eventually return and this will be a not found error
retry.Run(t, func(t *retry.R) {
authz3, err := r.ResolveToken("found")
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
assert.Error(t, err)
assert.True(t, acl.IsErrNotFound(err))
assert.Nil(t, authz3)
})
requireIdentityCached(t, r, "found", false, "no longer cached")
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
acl: reduce complexity of token resolution process with alternative singleflighting (#5480) acl: reduce complexity of token resolution process with alternative singleflighting Switches acl resolution to use golang.org/x/sync/singleflight. For the identity/legacy lookups this is a drop-in replacement with the same overall approach to request coalescing. For policies this is technically a change in behavior, but when considered holistically is approximately performance neutral (with the benefit of less code). There are two goals with this blob of code (speaking specifically of policy resolution here): 1) Minimize cross-DC requests. 2) Minimize client-to-server LAN requests. The previous iteration of this code was optimizing for the case of many possibly different tokens being resolved concurrently that have a significant overlap in linked policies such that deduplication would be worth the complexity. While this is laudable there are some things to consider that can help to adjust expectations: 1) For v1.4+ policies are always replicated, and once a single policy shows up in a secondary DC the replicated data is considered authoritative for requests made in that DC. This means that our earlier concerns about minimizing cross-DC requests are irrelevant because there will be no cross-DC policy reads that occur. 2) For Server nodes the in-memory ACL policy cache is capped at zero, meaning it has no caching. Only Client nodes run with a cache. This means that instead of having an entire DC's worth of tokens (what a Server might see) that can have policy resolutions coalesced these nodes will only ever be seeing node-local token resolutions. In a reasonable worst-case scenario where a scheduler like Kubernetes has "filled" a node with Connect services, even that will only schedule ~100 connect services per node. If every service has a unique token there will only be 100 tokens to coalesce and even then those requests have to occur concurrently AND be hitting an empty consul cache. Instead of seeing a great coalescing opportunity for cutting down on redundant Policy resolutions, in practice it's far more likely given node densities that you'd see requests for the same token concurrently than you would for two tokens sharing a policy concurrently (to a degree that would warrant the overhead of the current variation of singleflighting. Given that, this patch switches the Policy resolution process to only singleflight by requesting token (but keeps the cache as by-policy).
2019-03-14 14:35:34 +00:00
t.Run("PolicyResolve-TokenNotFound", func(t *testing.T) {
t.Parallel()
_, rawToken, _ := testIdentityForToken("found")
foundToken := rawToken.(*structs.ACLToken)
secretID := foundToken.SecretID
tokenResolved := false
policyResolved := false
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: false,
localPolicies: false,
tokenReadFn: func(args *structs.ACLTokenGetRequest, reply *structs.ACLTokenResponse) error {
if !tokenResolved {
reply.Token = foundToken
tokenResolved = true
return nil
}
return fmt.Errorf("Not Supposed to be Invoked again")
},
policyResolveFn: func(args *structs.ACLPolicyBatchGetRequest, reply *structs.ACLPolicyBatchResponse) error {
if !policyResolved {
for _, policyID := range args.PolicyIDs {
_, policy, _ := testPolicyForID(policyID)
if policy != nil {
reply.Policies = append(reply.Policies, policy)
}
}
policyResolved = true
return nil
}
return acl.ErrNotFound // test condition
},
}
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "extend-cache"
config.Config.ACLTokenTTL = 0
config.Config.ACLPolicyTTL = 0
})
// Prime the standard caches.
authz, err := r.ResolveToken(secretID)
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
acl: reduce complexity of token resolution process with alternative singleflighting (#5480) acl: reduce complexity of token resolution process with alternative singleflighting Switches acl resolution to use golang.org/x/sync/singleflight. For the identity/legacy lookups this is a drop-in replacement with the same overall approach to request coalescing. For policies this is technically a change in behavior, but when considered holistically is approximately performance neutral (with the benefit of less code). There are two goals with this blob of code (speaking specifically of policy resolution here): 1) Minimize cross-DC requests. 2) Minimize client-to-server LAN requests. The previous iteration of this code was optimizing for the case of many possibly different tokens being resolved concurrently that have a significant overlap in linked policies such that deduplication would be worth the complexity. While this is laudable there are some things to consider that can help to adjust expectations: 1) For v1.4+ policies are always replicated, and once a single policy shows up in a secondary DC the replicated data is considered authoritative for requests made in that DC. This means that our earlier concerns about minimizing cross-DC requests are irrelevant because there will be no cross-DC policy reads that occur. 2) For Server nodes the in-memory ACL policy cache is capped at zero, meaning it has no caching. Only Client nodes run with a cache. This means that instead of having an entire DC's worth of tokens (what a Server might see) that can have policy resolutions coalesced these nodes will only ever be seeing node-local token resolutions. In a reasonable worst-case scenario where a scheduler like Kubernetes has "filled" a node with Connect services, even that will only schedule ~100 connect services per node. If every service has a unique token there will only be 100 tokens to coalesce and even then those requests have to occur concurrently AND be hitting an empty consul cache. Instead of seeing a great coalescing opportunity for cutting down on redundant Policy resolutions, in practice it's far more likely given node densities that you'd see requests for the same token concurrently than you would for two tokens sharing a policy concurrently (to a degree that would warrant the overhead of the current variation of singleflighting. Given that, this patch switches the Policy resolution process to only singleflight by requesting token (but keeps the cache as by-policy).
2019-03-14 14:35:34 +00:00
// Verify that the caches are setup properly.
requireIdentityCached(t, r, secretID, true, "cached")
requirePolicyCached(t, r, "node-wr", true, "cached") // from "found" token
requirePolicyCached(t, r, "dc2-key-wr", true, "cached") // from "found" token
// Nuke 1 policy from the cache so that we force a policy resolve
// during token resolve.
r.cache.RemovePolicy("dc2-key-wr")
_, err = r.ResolveToken(secretID)
require.True(t, acl.IsErrNotFound(err))
requireIdentityCached(t, r, secretID, false, "identity not found cached")
requirePolicyCached(t, r, "node-wr", true, "still cached")
require.Nil(t, r.cache.GetPolicy("dc2-key-wr"), "not stored at all")
})
t.Run("PolicyResolve-PermissionDenied", func(t *testing.T) {
t.Parallel()
_, rawToken, _ := testIdentityForToken("found")
foundToken := rawToken.(*structs.ACLToken)
secretID := foundToken.SecretID
policyResolved := false
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: false,
localPolicies: false,
tokenReadFn: func(args *structs.ACLTokenGetRequest, reply *structs.ACLTokenResponse) error {
// no limit
reply.Token = foundToken
return nil
},
policyResolveFn: func(args *structs.ACLPolicyBatchGetRequest, reply *structs.ACLPolicyBatchResponse) error {
if !policyResolved {
for _, policyID := range args.PolicyIDs {
_, policy, _ := testPolicyForID(policyID)
if policy != nil {
reply.Policies = append(reply.Policies, policy)
}
}
policyResolved = true
return nil
}
return acl.ErrPermissionDenied // test condition
},
}
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "extend-cache"
config.Config.ACLTokenTTL = 0
config.Config.ACLPolicyTTL = 0
})
// Prime the standard caches.
authz, err := r.ResolveToken(secretID)
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
acl: reduce complexity of token resolution process with alternative singleflighting (#5480) acl: reduce complexity of token resolution process with alternative singleflighting Switches acl resolution to use golang.org/x/sync/singleflight. For the identity/legacy lookups this is a drop-in replacement with the same overall approach to request coalescing. For policies this is technically a change in behavior, but when considered holistically is approximately performance neutral (with the benefit of less code). There are two goals with this blob of code (speaking specifically of policy resolution here): 1) Minimize cross-DC requests. 2) Minimize client-to-server LAN requests. The previous iteration of this code was optimizing for the case of many possibly different tokens being resolved concurrently that have a significant overlap in linked policies such that deduplication would be worth the complexity. While this is laudable there are some things to consider that can help to adjust expectations: 1) For v1.4+ policies are always replicated, and once a single policy shows up in a secondary DC the replicated data is considered authoritative for requests made in that DC. This means that our earlier concerns about minimizing cross-DC requests are irrelevant because there will be no cross-DC policy reads that occur. 2) For Server nodes the in-memory ACL policy cache is capped at zero, meaning it has no caching. Only Client nodes run with a cache. This means that instead of having an entire DC's worth of tokens (what a Server might see) that can have policy resolutions coalesced these nodes will only ever be seeing node-local token resolutions. In a reasonable worst-case scenario where a scheduler like Kubernetes has "filled" a node with Connect services, even that will only schedule ~100 connect services per node. If every service has a unique token there will only be 100 tokens to coalesce and even then those requests have to occur concurrently AND be hitting an empty consul cache. Instead of seeing a great coalescing opportunity for cutting down on redundant Policy resolutions, in practice it's far more likely given node densities that you'd see requests for the same token concurrently than you would for two tokens sharing a policy concurrently (to a degree that would warrant the overhead of the current variation of singleflighting. Given that, this patch switches the Policy resolution process to only singleflight by requesting token (but keeps the cache as by-policy).
2019-03-14 14:35:34 +00:00
// Verify that the caches are setup properly.
requireIdentityCached(t, r, secretID, true, "cached")
requirePolicyCached(t, r, "node-wr", true, "cached") // from "found" token
requirePolicyCached(t, r, "dc2-key-wr", true, "cached") // from "found" token
// Nuke 1 policy from the cache so that we force a policy resolve
// during token resolve.
r.cache.RemovePolicy("dc2-key-wr")
_, err = r.ResolveToken(secretID)
require.True(t, acl.IsErrPermissionDenied(err))
require.Nil(t, r.cache.GetIdentity(secretID), "identity not stored at all")
requirePolicyCached(t, r, "node-wr", true, "still cached")
require.Nil(t, r.cache.GetPolicy("dc2-key-wr"), "not stored at all")
})
2014-08-11 21:01:45 +00:00
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func TestACLResolver_DatacenterScoping(t *testing.T) {
t.Parallel()
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Run("dc1", func(t *testing.T) {
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: true,
localPolicies: true,
localRoles: true,
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// No need to provide any of the RPC callbacks
}
r := newTestACLResolver(t, delegate, nil)
authz, err := r.ResolveToken("found")
require.NotNil(t, authz)
require.NoError(t, err)
require.Equal(t, acl.Deny, authz.ACLRead(nil))
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
require.Equal(t, acl.Deny, authz.KeyWrite("foo", nil))
2014-08-12 17:54:56 +00:00
})
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Run("dc2", func(t *testing.T) {
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc2",
legacy: false,
localTokens: true,
localPolicies: true,
localRoles: true,
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// No need to provide any of the RPC callbacks
}
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.Datacenter = "dc2"
})
2014-08-12 17:54:56 +00:00
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("found")
require.NotNil(t, authz)
require.NoError(t, err)
require.Equal(t, acl.Deny, authz.ACLRead(nil))
require.Equal(t, acl.Deny, authz.NodeWrite("foo", nil))
require.Equal(t, acl.Allow, authz.KeyWrite("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
2014-08-12 17:54:56 +00:00
}
// TODO(rb): replicate this sort of test but for roles
func TestACLResolver_Client(t *testing.T) {
t.Parallel()
t.Run("Racey-Token-Mod-Policy-Resolve", func(t *testing.T) {
t.Parallel()
var tokenReads int32
var policyResolves int32
modified := false
deleted := false
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: false,
localPolicies: false,
tokenReadFn: func(args *structs.ACLTokenGetRequest, reply *structs.ACLTokenResponse) error {
atomic.AddInt32(&tokenReads, 1)
if deleted {
return acl.ErrNotFound
} else if modified {
_, token, _ := testIdentityForToken("racey-modified")
reply.Token = token.(*structs.ACLToken)
} else {
_, token, _ := testIdentityForToken("racey-unmodified")
reply.Token = token.(*structs.ACLToken)
}
return nil
},
policyResolveFn: func(args *structs.ACLPolicyBatchGetRequest, reply *structs.ACLPolicyBatchResponse) error {
atomic.AddInt32(&policyResolves, 1)
if deleted {
return acl.ErrNotFound
} else if !modified {
modified = true
return acl.ErrPermissionDenied
} else {
deleted = true
for _, policyID := range args.PolicyIDs {
_, policy, _ := testPolicyForID(policyID)
if policy != nil {
reply.Policies = append(reply.Policies, policy)
}
}
modified = true
return nil
}
},
}
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLTokenTTL = 600 * time.Second
config.Config.ACLPolicyTTL = 30 * time.Millisecond
config.Config.ACLRoleTTL = 30 * time.Millisecond
config.Config.ACLDownPolicy = "extend-cache"
})
// resolves the token
// gets a permission denied resolving the policies - token updated
// invalidates the token
// refetches the token
// fetches the policies from the modified token
// creates the authorizers
//
// Must use the token secret here in order for the cached identity
// to be removed properly. Many other tests just resolve some other
// random name and it wont matter but this one cannot.
authz, err := r.ResolveToken("a1a54629-5050-4d17-8a4e-560d2423f835")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
require.Equal(t, acl.Deny, authz.ACLRead(nil))
require.True(t, modified)
require.True(t, deleted)
require.Equal(t, int32(2), tokenReads)
require.Equal(t, int32(2), policyResolves)
// sleep long enough for the policy cache to expire
time.Sleep(50 * time.Millisecond)
// this round the identity will be resolved from the cache
// then the policy will be resolved but resolution will return ACL not found
// resolution will stop with the not found error (even though we still have the
// policies within the cache)
authz, err = r.ResolveToken("a1a54629-5050-4d17-8a4e-560d2423f835")
require.EqualError(t, err, acl.ErrNotFound.Error())
require.Nil(t, authz)
require.True(t, modified)
require.True(t, deleted)
require.Equal(t, tokenReads, int32(2))
require.Equal(t, policyResolves, int32(3))
})
t.Run("Concurrent-Token-Resolve", func(t *testing.T) {
t.Parallel()
var tokenReads int32
var policyResolves int32
readyCh := make(chan struct{})
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: false,
localPolicies: false,
tokenReadFn: func(args *structs.ACLTokenGetRequest, reply *structs.ACLTokenResponse) error {
atomic.AddInt32(&tokenReads, 1)
switch args.TokenID {
case "a1a54629-5050-4d17-8a4e-560d2423f835":
acl: reduce complexity of token resolution process with alternative singleflighting (#5480) acl: reduce complexity of token resolution process with alternative singleflighting Switches acl resolution to use golang.org/x/sync/singleflight. For the identity/legacy lookups this is a drop-in replacement with the same overall approach to request coalescing. For policies this is technically a change in behavior, but when considered holistically is approximately performance neutral (with the benefit of less code). There are two goals with this blob of code (speaking specifically of policy resolution here): 1) Minimize cross-DC requests. 2) Minimize client-to-server LAN requests. The previous iteration of this code was optimizing for the case of many possibly different tokens being resolved concurrently that have a significant overlap in linked policies such that deduplication would be worth the complexity. While this is laudable there are some things to consider that can help to adjust expectations: 1) For v1.4+ policies are always replicated, and once a single policy shows up in a secondary DC the replicated data is considered authoritative for requests made in that DC. This means that our earlier concerns about minimizing cross-DC requests are irrelevant because there will be no cross-DC policy reads that occur. 2) For Server nodes the in-memory ACL policy cache is capped at zero, meaning it has no caching. Only Client nodes run with a cache. This means that instead of having an entire DC's worth of tokens (what a Server might see) that can have policy resolutions coalesced these nodes will only ever be seeing node-local token resolutions. In a reasonable worst-case scenario where a scheduler like Kubernetes has "filled" a node with Connect services, even that will only schedule ~100 connect services per node. If every service has a unique token there will only be 100 tokens to coalesce and even then those requests have to occur concurrently AND be hitting an empty consul cache. Instead of seeing a great coalescing opportunity for cutting down on redundant Policy resolutions, in practice it's far more likely given node densities that you'd see requests for the same token concurrently than you would for two tokens sharing a policy concurrently (to a degree that would warrant the overhead of the current variation of singleflighting. Given that, this patch switches the Policy resolution process to only singleflight by requesting token (but keeps the cache as by-policy).
2019-03-14 14:35:34 +00:00
_, token, _ := testIdentityForToken("concurrent-resolve")
reply.Token = token.(*structs.ACLToken)
default:
return acl.ErrNotFound
}
select {
case <-readyCh:
}
time.Sleep(100 * time.Millisecond)
return nil
},
policyResolveFn: func(args *structs.ACLPolicyBatchGetRequest, reply *structs.ACLPolicyBatchResponse) error {
atomic.AddInt32(&policyResolves, 1)
acl: reduce complexity of token resolution process with alternative singleflighting (#5480) acl: reduce complexity of token resolution process with alternative singleflighting Switches acl resolution to use golang.org/x/sync/singleflight. For the identity/legacy lookups this is a drop-in replacement with the same overall approach to request coalescing. For policies this is technically a change in behavior, but when considered holistically is approximately performance neutral (with the benefit of less code). There are two goals with this blob of code (speaking specifically of policy resolution here): 1) Minimize cross-DC requests. 2) Minimize client-to-server LAN requests. The previous iteration of this code was optimizing for the case of many possibly different tokens being resolved concurrently that have a significant overlap in linked policies such that deduplication would be worth the complexity. While this is laudable there are some things to consider that can help to adjust expectations: 1) For v1.4+ policies are always replicated, and once a single policy shows up in a secondary DC the replicated data is considered authoritative for requests made in that DC. This means that our earlier concerns about minimizing cross-DC requests are irrelevant because there will be no cross-DC policy reads that occur. 2) For Server nodes the in-memory ACL policy cache is capped at zero, meaning it has no caching. Only Client nodes run with a cache. This means that instead of having an entire DC's worth of tokens (what a Server might see) that can have policy resolutions coalesced these nodes will only ever be seeing node-local token resolutions. In a reasonable worst-case scenario where a scheduler like Kubernetes has "filled" a node with Connect services, even that will only schedule ~100 connect services per node. If every service has a unique token there will only be 100 tokens to coalesce and even then those requests have to occur concurrently AND be hitting an empty consul cache. Instead of seeing a great coalescing opportunity for cutting down on redundant Policy resolutions, in practice it's far more likely given node densities that you'd see requests for the same token concurrently than you would for two tokens sharing a policy concurrently (to a degree that would warrant the overhead of the current variation of singleflighting. Given that, this patch switches the Policy resolution process to only singleflight by requesting token (but keeps the cache as by-policy).
2019-03-14 14:35:34 +00:00
for _, policyID := range args.PolicyIDs {
_, policy, _ := testPolicyForID(policyID)
if policy != nil {
reply.Policies = append(reply.Policies, policy)
}
}
return nil
},
}
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
// effectively disable caching - so the only way we end up with 1 token read is if they were
// being resolved concurrently
config.Config.ACLTokenTTL = 0 * time.Second
config.Config.ACLPolicyTTL = 30 * time.Millisecond
config.Config.ACLRoleTTL = 30 * time.Millisecond
config.Config.ACLDownPolicy = "extend-cache"
})
ch1 := make(chan *asyncResolutionResult)
ch2 := make(chan *asyncResolutionResult)
go resolveTokenAsync(r, "a1a54629-5050-4d17-8a4e-560d2423f835", ch1)
go resolveTokenAsync(r, "a1a54629-5050-4d17-8a4e-560d2423f835", ch2)
close(readyCh)
res1 := <-ch1
res2 := <-ch2
require.NoError(t, res1.err)
require.NoError(t, res2.err)
require.Equal(t, res1.authz, res2.authz)
require.Equal(t, int32(1), tokenReads)
require.Equal(t, int32(1), policyResolves)
})
}
func TestACLResolver_Client_TokensPoliciesAndRoles(t *testing.T) {
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: false,
localPolicies: false,
localRoles: false,
}
delegate.tokenReadFn = delegate.plainTokenReadFn
delegate.policyResolveFn = delegate.plainPolicyResolveFn
delegate.roleResolveFn = delegate.plainRoleResolveFn
testACLResolver_variousTokens(t, delegate)
}
func TestACLResolver_LocalTokensPoliciesAndRoles(t *testing.T) {
t.Parallel()
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: true,
localPolicies: true,
localRoles: true,
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// No need to provide any of the RPC callbacks
}
testACLResolver_variousTokens(t, delegate)
}
func TestACLResolver_LocalPoliciesAndRoles(t *testing.T) {
t.Parallel()
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: false,
localPolicies: true,
localRoles: true,
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
}
delegate.tokenReadFn = delegate.plainTokenReadFn
testACLResolver_variousTokens(t, delegate)
}
func testACLResolver_variousTokens(t *testing.T, delegate *ACLResolverTestDelegate) {
t.Helper()
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLTokenTTL = 600 * time.Second
config.Config.ACLPolicyTTL = 30 * time.Millisecond
config.Config.ACLRoleTTL = 30 * time.Millisecond
config.Config.ACLDownPolicy = "extend-cache"
})
reset := func() {
// prevent subtest bleedover
r.cache.Purge()
delegate.Reset()
}
runTwiceAndReset := func(name string, f func(t *testing.T)) {
t.Helper()
defer reset() // reset the stateful resolve AND blow away the cache
t.Run(name+" (no-cache)", f)
delegate.Reset() // allow the stateful resolve functions to reset
t.Run(name+" (cached)", f)
}
runTwiceAndReset("Missing Identity", func(t *testing.T) {
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("doesn't exist")
require.Nil(t, authz)
require.Error(t, err)
require.True(t, acl.IsErrNotFound(err))
})
runTwiceAndReset("Missing Policy", func(t *testing.T) {
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("missing-policy")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.ACLRead(nil))
require.Equal(t, acl.Deny, authz.NodeWrite("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
runTwiceAndReset("Missing Role", func(t *testing.T) {
authz, err := r.ResolveToken("missing-role")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.ACLRead(nil))
require.Equal(t, acl.Deny, authz.NodeWrite("foo", nil))
})
runTwiceAndReset("Missing Policy on Role", func(t *testing.T) {
authz, err := r.ResolveToken("missing-policy-on-role")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Allow, authz.ACLRead(nil))
require.Equal(t, acl.Deny, authz.NodeWrite("foo", nil))
})
runTwiceAndReset("Normal with Policy", func(t *testing.T) {
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("found")
require.NotNil(t, authz)
require.NoError(t, err)
require.Equal(t, acl.Deny, authz.ACLRead(nil))
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
runTwiceAndReset("Normal with Role", func(t *testing.T) {
authz, err := r.ResolveToken("found-role")
require.NotNil(t, authz)
require.NoError(t, err)
require.Equal(t, acl.Deny, authz.ACLRead(nil))
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
})
runTwiceAndReset("Normal with Policy and Role", func(t *testing.T) {
authz, err := r.ResolveToken("found-policy-and-role")
require.NotNil(t, authz)
require.NoError(t, err)
require.Equal(t, acl.Deny, authz.ACLRead(nil))
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
require.Equal(t, acl.Allow, authz.ServiceRead("bar", nil))
})
runTwiceAndReset("Synthetic Policies Independently Cache", func(t *testing.T) {
// We resolve both of these tokens in the same cache session
// to verify that the keys for caching synthetic policies don't bleed
// over between each other.
{
authz, err := r.ResolveToken("found-synthetic-policy-1")
require.NotNil(t, authz)
require.NoError(t, err)
// spot check some random perms
require.Equal(t, acl.Deny, authz.ACLRead(nil))
require.Equal(t, acl.Deny, authz.NodeWrite("foo", nil))
// ensure we didn't bleed over to the other synthetic policy
require.Equal(t, acl.Deny, authz.ServiceWrite("service2", nil))
// check our own synthetic policy
require.Equal(t, acl.Allow, authz.ServiceWrite("service1", nil))
require.Equal(t, acl.Allow, authz.ServiceRead("literally-anything", nil))
require.Equal(t, acl.Allow, authz.NodeRead("any-node", nil))
}
{
authz, err := r.ResolveToken("found-synthetic-policy-2")
require.NotNil(t, authz)
require.NoError(t, err)
// spot check some random perms
require.Equal(t, acl.Deny, authz.ACLRead(nil))
require.Equal(t, acl.Deny, authz.NodeWrite("foo", nil))
// ensure we didn't bleed over to the other synthetic policy
require.Equal(t, acl.Deny, authz.ServiceWrite("service1", nil))
// check our own synthetic policy
require.Equal(t, acl.Allow, authz.ServiceWrite("service2", nil))
require.Equal(t, acl.Allow, authz.ServiceRead("literally-anything", nil))
require.Equal(t, acl.Allow, authz.NodeRead("any-node", nil))
}
})
runTwiceAndReset("Anonymous", func(t *testing.T) {
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("")
require.NotNil(t, authz)
require.NoError(t, err)
require.Equal(t, acl.Deny, authz.ACLRead(nil))
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
runTwiceAndReset("legacy-management", func(t *testing.T) {
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("legacy-management")
require.NotNil(t, authz)
require.NoError(t, err)
require.Equal(t, acl.Allow, authz.ACLWrite(nil))
require.Equal(t, acl.Allow, authz.KeyRead("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
runTwiceAndReset("legacy-client", func(t *testing.T) {
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("legacy-client")
require.NoError(t, err)
require.NotNil(t, authz)
require.Equal(t, acl.Deny, authz.OperatorRead(nil))
require.Equal(t, acl.Allow, authz.ServiceRead("foo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func TestACLResolver_Legacy(t *testing.T) {
t.Parallel()
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Run("Cached", func(t *testing.T) {
t.Parallel()
cached := false
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: true,
localTokens: false,
localPolicies: false,
getPolicyFn: func(args *structs.ACLPolicyResolveLegacyRequest, reply *structs.ACLPolicyResolveLegacyResponse) error {
if !cached {
reply.Parent = "deny"
reply.TTL = 30
reply.ETag = "nothing"
reply.Policy = &acl.Policy{
ID: "not-needed",
PolicyRules: acl.PolicyRules{
Nodes: []*acl.NodeRule{
&acl.NodeRule{
Name: "foo",
Policy: acl.PolicyWrite,
},
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
},
},
}
cached = true
return nil
}
return errRPC
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
},
}
r := newTestACLResolver(t, delegate, nil)
authz, err := r.ResolveToken("foo")
require.NoError(t, err)
require.NotNil(t, authz)
// there is a bit of translation that happens
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
require.Equal(t, acl.Allow, authz.NodeWrite("foo/bar", nil))
require.Equal(t, acl.Deny, authz.NodeWrite("fo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// this should be from the cache
authz, err = r.ResolveToken("foo")
require.NoError(t, err)
require.NotNil(t, authz)
// there is a bit of translation that happens
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
require.Equal(t, acl.Allow, authz.NodeWrite("foo/bar", nil))
require.Equal(t, acl.Deny, authz.NodeWrite("fo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Run("Cache-Expiry-Extend", func(t *testing.T) {
t.Parallel()
cached := false
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: true,
localTokens: false,
localPolicies: false,
getPolicyFn: func(args *structs.ACLPolicyResolveLegacyRequest, reply *structs.ACLPolicyResolveLegacyResponse) error {
if !cached {
reply.Parent = "deny"
reply.TTL = 0
reply.ETag = "nothing"
reply.Policy = &acl.Policy{
ID: "not-needed",
PolicyRules: acl.PolicyRules{
Nodes: []*acl.NodeRule{
&acl.NodeRule{
Name: "foo",
Policy: acl.PolicyWrite,
},
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
},
},
}
cached = true
return nil
}
return errRPC
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
},
}
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLTokenTTL = 0
})
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("foo")
require.NoError(t, err)
require.NotNil(t, authz)
// there is a bit of translation that happens
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
require.Equal(t, acl.Allow, authz.NodeWrite("foo/bar", nil))
require.Equal(t, acl.Deny, authz.NodeWrite("fo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// this should be from the cache
authz, err = r.ResolveToken("foo")
require.NoError(t, err)
require.NotNil(t, authz)
// there is a bit of translation that happens
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
require.Equal(t, acl.Allow, authz.NodeWrite("foo/bar", nil))
require.Equal(t, acl.Deny, authz.NodeWrite("fo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Run("Cache-Expiry-Allow", func(t *testing.T) {
t.Parallel()
cached := false
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: true,
localTokens: false,
localPolicies: false,
getPolicyFn: func(args *structs.ACLPolicyResolveLegacyRequest, reply *structs.ACLPolicyResolveLegacyResponse) error {
if !cached {
reply.Parent = "deny"
reply.TTL = 0
reply.ETag = "nothing"
reply.Policy = &acl.Policy{
ID: "not-needed",
PolicyRules: acl.PolicyRules{
Nodes: []*acl.NodeRule{
&acl.NodeRule{
Name: "foo",
Policy: acl.PolicyWrite,
},
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
},
},
}
cached = true
return nil
}
return errRPC
},
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "allow"
config.Config.ACLTokenTTL = 0
})
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("foo")
require.NoError(t, err)
require.NotNil(t, authz)
// there is a bit of translation that happens
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
require.Equal(t, acl.Allow, authz.NodeWrite("foo/bar", nil))
require.Equal(t, acl.Deny, authz.NodeWrite("fo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// this should be from the cache
authz, err = r.ResolveToken("foo")
require.NoError(t, err)
require.NotNil(t, authz)
// there is a bit of translation that happens
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
require.Equal(t, acl.Allow, authz.NodeWrite("foo/bar", nil))
require.Equal(t, acl.Allow, authz.NodeWrite("fo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Run("Cache-Expiry-Deny", func(t *testing.T) {
t.Parallel()
cached := false
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: true,
localTokens: false,
localPolicies: false,
getPolicyFn: func(args *structs.ACLPolicyResolveLegacyRequest, reply *structs.ACLPolicyResolveLegacyResponse) error {
if !cached {
reply.Parent = "deny"
reply.TTL = 0
reply.ETag = "nothing"
reply.Policy = &acl.Policy{
ID: "not-needed",
PolicyRules: acl.PolicyRules{
Nodes: []*acl.NodeRule{
&acl.NodeRule{
Name: "foo",
Policy: acl.PolicyWrite,
},
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
},
},
}
cached = true
return nil
}
return errRPC
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
},
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "deny"
config.Config.ACLTokenTTL = 0
})
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
authz, err := r.ResolveToken("foo")
require.NoError(t, err)
require.NotNil(t, authz)
// there is a bit of translation that happens
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
require.Equal(t, acl.Allow, authz.NodeWrite("foo/bar", nil))
require.Equal(t, acl.Deny, authz.NodeWrite("fo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// this should be from the cache
authz, err = r.ResolveToken("foo")
require.NoError(t, err)
require.NotNil(t, authz)
// there is a bit of translation that happens
require.Equal(t, acl.Deny, authz.NodeWrite("foo", nil))
require.Equal(t, acl.Deny, authz.NodeWrite("foo/bar", nil))
require.Equal(t, acl.Deny, authz.NodeWrite("fo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
})
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
t.Run("Cache-Expiry-Async-Cache", func(t *testing.T) {
t.Parallel()
cached := false
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: true,
localTokens: false,
localPolicies: false,
getPolicyFn: func(args *structs.ACLPolicyResolveLegacyRequest, reply *structs.ACLPolicyResolveLegacyResponse) error {
if !cached {
reply.Parent = "deny"
reply.TTL = 0
reply.ETag = "nothing"
reply.Policy = &acl.Policy{
ID: "not-needed",
PolicyRules: acl.PolicyRules{
Nodes: []*acl.NodeRule{
&acl.NodeRule{
Name: "foo",
Policy: acl.PolicyWrite,
},
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
},
},
}
cached = true
return nil
}
return acl.ErrNotFound
},
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
r := newTestACLResolver(t, delegate, func(config *ACLResolverConfig) {
config.Config.ACLDownPolicy = "async-cache"
config.Config.ACLTokenTTL = 0
})
authz, err := r.ResolveToken("foo")
require.NoError(t, err)
require.NotNil(t, authz)
// there is a bit of translation that happens
require.Equal(t, acl.Allow, authz.NodeWrite("foo", nil))
require.Equal(t, acl.Allow, authz.NodeWrite("foo/bar", nil))
require.Equal(t, acl.Deny, authz.NodeWrite("fo", nil))
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// delivered from the cache
authz2, err := r.ResolveToken("foo")
require.NoError(t, err)
require.NotNil(t, authz)
require.True(t, authz == authz2)
// the go routine spawned will eventually return and this will be a not found error
retry.Run(t, func(t *retry.R) {
authz3, err := r.ResolveToken("foo")
assert.Error(t, err)
assert.True(t, acl.IsErrNotFound(err))
assert.Nil(t, authz3)
})
})
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
/*
func TestACL_Replication(t *testing.T) {
t.Parallel()
aclExtendPolicies := []string{"extend-cache", "async-cache"} //"async-cache"
for _, aclDownPolicy := range aclExtendPolicies {
dir1, s1 := testServerWithConfig(t, func(c *Config) {
c.ACLDatacenter = "dc1"
c.ACLMasterToken = "root"
})
defer os.RemoveAll(dir1)
defer s1.Shutdown()
client := rpcClient(t, s1)
defer client.Close()
dir2, s2 := testServerWithConfig(t, func(c *Config) {
c.Datacenter = "dc2"
c.ACLDatacenter = "dc1"
c.ACLDefaultPolicy = "deny"
c.ACLDownPolicy = aclDownPolicy
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
c.ACLTokenReplication = true
c.ACLReplicationRate = 100
c.ACLReplicationBurst = 100
c.ACLReplicationApplyLimit = 1000000
})
ACL Token Persistence and Reloading (#5328) This PR adds two features which will be useful for operators when ACLs are in use. 1. Tokens set in configuration files are now reloadable. 2. If `acl.enable_token_persistence` is set to `true` in the configuration, tokens set via the `v1/agent/token` endpoint are now persisted to disk and loaded when the agent starts (or during configuration reload) Note that token persistence is opt-in so our users who do not want tokens on the local disk will see no change. Some other secondary changes: * Refactored a bunch of places where the replication token is retrieved from the token store. This token isn't just for replicating ACLs and now it is named accordingly. * Allowed better paths in the `v1/agent/token/` API. Instead of paths like: `v1/agent/token/acl_replication_token` the path can now be just `v1/agent/token/replication`. The old paths remain to be valid. * Added a couple new API functions to set tokens via the new paths. Deprecated the old ones and pointed to the new names. The names are also generally better and don't imply that what you are setting is for ACLs but rather are setting ACL tokens. There is a minor semantic difference there especially for the replication token as again, its no longer used only for ACL token/policy replication. The new functions will detect 404s and fallback to using the older token paths when talking to pre-1.4.3 agents. * Docs updated to reflect the API additions and to show using the new endpoints. * Updated the ACL CLI set-agent-tokens command to use the non-deprecated APIs.
2019-02-27 19:28:31 +00:00
s2.tokens.UpdateReplicationToken("root")
defer os.RemoveAll(dir2)
defer s2.Shutdown()
dir3, s3 := testServerWithConfig(t, func(c *Config) {
c.Datacenter = "dc3"
c.ACLDatacenter = "dc1"
c.ACLDownPolicy = "deny"
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
c.ACLTokenReplication = true
c.ACLReplicationRate = 100
c.ACLReplicationBurst = 100
c.ACLReplicationApplyLimit = 1000000
})
ACL Token Persistence and Reloading (#5328) This PR adds two features which will be useful for operators when ACLs are in use. 1. Tokens set in configuration files are now reloadable. 2. If `acl.enable_token_persistence` is set to `true` in the configuration, tokens set via the `v1/agent/token` endpoint are now persisted to disk and loaded when the agent starts (or during configuration reload) Note that token persistence is opt-in so our users who do not want tokens on the local disk will see no change. Some other secondary changes: * Refactored a bunch of places where the replication token is retrieved from the token store. This token isn't just for replicating ACLs and now it is named accordingly. * Allowed better paths in the `v1/agent/token/` API. Instead of paths like: `v1/agent/token/acl_replication_token` the path can now be just `v1/agent/token/replication`. The old paths remain to be valid. * Added a couple new API functions to set tokens via the new paths. Deprecated the old ones and pointed to the new names. The names are also generally better and don't imply that what you are setting is for ACLs but rather are setting ACL tokens. There is a minor semantic difference there especially for the replication token as again, its no longer used only for ACL token/policy replication. The new functions will detect 404s and fallback to using the older token paths when talking to pre-1.4.3 agents. * Docs updated to reflect the API additions and to show using the new endpoints. * Updated the ACL CLI set-agent-tokens command to use the non-deprecated APIs.
2019-02-27 19:28:31 +00:00
s3.tokens.UpdateReplicationToken("root")
defer os.RemoveAll(dir3)
defer s3.Shutdown()
// Try to join.
joinWAN(t, s2, s1)
joinWAN(t, s3, s1)
testrpc.WaitForLeader(t, s1.RPC, "dc1")
testrpc.WaitForLeader(t, s1.RPC, "dc2")
testrpc.WaitForLeader(t, s1.RPC, "dc3")
// Create a new token.
arg := structs.ACLRequest{
Datacenter: "dc1",
Op: structs.ACLSet,
ACL: structs.ACL{
Name: "User token",
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
Type: structs.ACLTokenTypeClient,
Rules: testACLPolicy,
},
WriteRequest: structs.WriteRequest{Token: "root"},
}
var id string
if err := s1.RPC("ACL.Apply", &arg, &id); err != nil {
t.Fatalf("err: %v", err)
}
// Wait for replication to occur.
retry.Run(t, func(r *retry.R) {
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
_, acl, err := s2.fsm.State().ACLTokenGetBySecret(nil, id)
if err != nil {
r.Fatal(err)
}
if acl == nil {
r.Fatal(nil)
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
_, acl, err = s3.fsm.State().ACLTokenGetBySecret(nil, id)
if err != nil {
r.Fatal(err)
}
if acl == nil {
r.Fatal(nil)
}
})
// Kill the ACL datacenter.
s1.Shutdown()
// Token should resolve on s2, which has replication + extend-cache.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
acl, err := s2.ResolveToken(id)
if err != nil {
t.Fatalf("err: %v", err)
}
if acl == nil {
t.Fatalf("missing acl")
}
// Check the policy
if acl.KeyRead("bar") {
t.Fatalf("unexpected read")
}
if !acl.KeyRead("foo/test") {
t.Fatalf("unexpected failed read")
}
// Although s3 has replication, and we verified that the ACL is there,
// it can not be used because of the down policy.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
acl, err = s3.ResolveToken(id)
if err != nil {
t.Fatalf("err: %v", err)
}
if acl == nil {
t.Fatalf("missing acl")
}
// Check the policy.
if acl.KeyRead("bar") {
t.Fatalf("unexpected read")
}
if acl.KeyRead("foo/test") {
t.Fatalf("unexpected read")
}
}
}
func TestACL_MultiDC_Found(t *testing.T) {
t.Parallel()
dir1, s1 := testServerWithConfig(t, func(c *Config) {
c.ACLDatacenter = "dc1"
2014-08-12 22:32:44 +00:00
c.ACLMasterToken = "root"
})
defer os.RemoveAll(dir1)
defer s1.Shutdown()
client := rpcClient(t, s1)
defer client.Close()
dir2, s2 := testServerWithConfig(t, func(c *Config) {
c.Datacenter = "dc2"
c.ACLDatacenter = "dc1" // Enable ACLs!
})
defer os.RemoveAll(dir2)
defer s2.Shutdown()
// Try to join
2017-05-05 10:29:49 +00:00
joinWAN(t, s2, s1)
testrpc.WaitForLeader(t, s1.RPC, "dc1")
testrpc.WaitForLeader(t, s1.RPC, "dc2")
// Create a new token
arg := structs.ACLRequest{
Datacenter: "dc1",
Op: structs.ACLSet,
ACL: structs.ACL{
Name: "User token",
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
Type: structs.ACLTokenTypeClient,
Rules: testACLPolicy,
},
2014-08-12 22:32:44 +00:00
WriteRequest: structs.WriteRequest{Token: "root"},
}
var id string
if err := s1.RPC("ACL.Apply", &arg, &id); err != nil {
t.Fatalf("err: %v", err)
}
// Token should resolve
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
acl, err := s2.ResolveToken(id)
if err != nil {
t.Fatalf("err: %v", err)
}
if acl == nil {
t.Fatalf("missing acl")
}
// Check the policy
if acl.KeyRead("bar") {
t.Fatalf("unexpected read")
}
if !acl.KeyRead("foo/test") {
t.Fatalf("unexpected failed read")
}
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
*/
func TestACL_filterHealthChecks(t *testing.T) {
2017-05-22 22:14:27 +00:00
t.Parallel()
// Create some health checks.
fill := func() structs.HealthChecks {
return structs.HealthChecks{
&structs.HealthCheck{
Node: "node1",
CheckID: "check1",
ServiceName: "foo",
},
}
}
// Try permissive filtering.
{
hc := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.AllowAll(), nil, false)
filt.filterHealthChecks(&hc)
if len(hc) != 1 {
t.Fatalf("bad: %#v", hc)
}
}
// Try restrictive filtering.
{
hc := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.DenyAll(), nil, false)
filt.filterHealthChecks(&hc)
if len(hc) != 0 {
t.Fatalf("bad: %#v", hc)
}
}
// Allowed to see the service but not the node.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err := acl.NewPolicyFromSource("", 0, `
service "foo" {
policy = "read"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err := acl.NewPolicyAuthorizerWithDefaults(acl.DenyAll(), []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// This will work because version 8 ACLs aren't being enforced.
{
hc := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, false)
filt.filterHealthChecks(&hc)
if len(hc) != 1 {
t.Fatalf("bad: %#v", hc)
}
}
// But with version 8 the node will block it.
{
hc := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, true)
filt.filterHealthChecks(&hc)
if len(hc) != 0 {
t.Fatalf("bad: %#v", hc)
}
}
// Chain on access to the node.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err = acl.NewPolicyFromSource("", 0, `
node "node1" {
policy = "read"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err = acl.NewPolicyAuthorizerWithDefaults(perms, []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// Now it should go through.
{
hc := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, true)
filt.filterHealthChecks(&hc)
if len(hc) != 1 {
t.Fatalf("bad: %#v", hc)
}
}
}
func TestACL_filterIntentions(t *testing.T) {
t.Parallel()
assert := assert.New(t)
fill := func() structs.Intentions {
return structs.Intentions{
&structs.Intention{
ID: "f004177f-2c28-83b7-4229-eacc25fe55d1",
DestinationName: "bar",
},
&structs.Intention{
ID: "f004177f-2c28-83b7-4229-eacc25fe55d2",
DestinationName: "foo",
},
}
}
// Try permissive filtering.
{
ixns := fill()
filt := newACLFilter(acl.AllowAll(), nil, false)
filt.filterIntentions(&ixns)
assert.Len(ixns, 2)
}
// Try restrictive filtering.
{
ixns := fill()
filt := newACLFilter(acl.DenyAll(), nil, false)
filt.filterIntentions(&ixns)
assert.Len(ixns, 0)
}
// Policy to see one
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err := acl.NewPolicyFromSource("", 0, `
service "foo" {
policy = "read"
}
`, acl.SyntaxLegacy, nil, nil)
assert.Nil(err)
perms, err := acl.NewPolicyAuthorizerWithDefaults(acl.DenyAll(), []*acl.Policy{policy}, nil)
assert.Nil(err)
// Filter
{
ixns := fill()
filt := newACLFilter(perms, nil, false)
filt.filterIntentions(&ixns)
assert.Len(ixns, 1)
}
}
func TestACL_filterServices(t *testing.T) {
2017-05-22 22:14:27 +00:00
t.Parallel()
// Create some services
services := structs.Services{
"service1": []string{},
"service2": []string{},
"consul": []string{},
}
// Try permissive filtering.
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.AllowAll(), nil, false)
filt.filterServices(services)
if len(services) != 3 {
t.Fatalf("bad: %#v", services)
}
// Try restrictive filtering.
2017-04-21 00:02:42 +00:00
filt = newACLFilter(acl.DenyAll(), nil, false)
filt.filterServices(services)
if len(services) != 1 {
t.Fatalf("bad: %#v", services)
}
if _, ok := services["consul"]; !ok {
t.Fatalf("bad: %#v", services)
}
// Try restrictive filtering with version 8 enforcement.
2017-04-21 00:02:42 +00:00
filt = newACLFilter(acl.DenyAll(), nil, true)
filt.filterServices(services)
if len(services) != 0 {
t.Fatalf("bad: %#v", services)
}
}
func TestACL_filterServiceNodes(t *testing.T) {
2017-05-22 22:14:27 +00:00
t.Parallel()
// Create some service nodes.
fill := func() structs.ServiceNodes {
return structs.ServiceNodes{
&structs.ServiceNode{
Node: "node1",
ServiceName: "foo",
},
}
}
// Try permissive filtering.
{
nodes := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.AllowAll(), nil, false)
filt.filterServiceNodes(&nodes)
if len(nodes) != 1 {
t.Fatalf("bad: %#v", nodes)
}
}
// Try restrictive filtering.
{
nodes := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.DenyAll(), nil, false)
filt.filterServiceNodes(&nodes)
if len(nodes) != 0 {
t.Fatalf("bad: %#v", nodes)
}
}
// Allowed to see the service but not the node.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err := acl.NewPolicyFromSource("", 0, `
service "foo" {
policy = "read"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err := acl.NewPolicyAuthorizerWithDefaults(acl.DenyAll(), []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// This will work because version 8 ACLs aren't being enforced.
{
nodes := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, false)
filt.filterServiceNodes(&nodes)
if len(nodes) != 1 {
t.Fatalf("bad: %#v", nodes)
}
}
// But with version 8 the node will block it.
{
nodes := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, true)
filt.filterServiceNodes(&nodes)
if len(nodes) != 0 {
t.Fatalf("bad: %#v", nodes)
}
}
// Chain on access to the node.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err = acl.NewPolicyFromSource("", 0, `
node "node1" {
policy = "read"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err = acl.NewPolicyAuthorizerWithDefaults(perms, []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// Now it should go through.
{
nodes := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, true)
filt.filterServiceNodes(&nodes)
if len(nodes) != 1 {
t.Fatalf("bad: %#v", nodes)
}
}
}
func TestACL_filterNodeServices(t *testing.T) {
2017-05-22 22:14:27 +00:00
t.Parallel()
// Create some node services.
fill := func() *structs.NodeServices {
return &structs.NodeServices{
Node: &structs.Node{
Node: "node1",
},
Services: map[string]*structs.NodeService{
"foo": &structs.NodeService{
ID: "foo",
Service: "foo",
},
},
}
}
// Try nil, which is a possible input.
{
var services *structs.NodeServices
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.AllowAll(), nil, false)
filt.filterNodeServices(&services)
if services != nil {
t.Fatalf("bad: %#v", services)
}
}
// Try permissive filtering.
{
services := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.AllowAll(), nil, false)
filt.filterNodeServices(&services)
if len(services.Services) != 1 {
t.Fatalf("bad: %#v", services.Services)
}
}
// Try restrictive filtering.
{
services := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.DenyAll(), nil, false)
filt.filterNodeServices(&services)
if len((*services).Services) != 0 {
t.Fatalf("bad: %#v", (*services).Services)
}
}
// Allowed to see the service but not the node.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err := acl.NewPolicyFromSource("", 0, `
service "foo" {
policy = "read"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err := acl.NewPolicyAuthorizerWithDefaults(acl.DenyAll(), []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// This will work because version 8 ACLs aren't being enforced.
{
services := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, false)
filt.filterNodeServices(&services)
if len((*services).Services) != 1 {
t.Fatalf("bad: %#v", (*services).Services)
}
}
// But with version 8 the node will block it.
{
services := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, true)
filt.filterNodeServices(&services)
if services != nil {
t.Fatalf("bad: %#v", services)
}
}
// Chain on access to the node.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err = acl.NewPolicyFromSource("", 0, `
node "node1" {
policy = "read"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err = acl.NewPolicyAuthorizerWithDefaults(perms, []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// Now it should go through.
{
services := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, true)
filt.filterNodeServices(&services)
if len((*services).Services) != 1 {
t.Fatalf("bad: %#v", (*services).Services)
}
}
}
func TestACL_filterCheckServiceNodes(t *testing.T) {
2017-05-22 22:14:27 +00:00
t.Parallel()
// Create some nodes.
fill := func() structs.CheckServiceNodes {
return structs.CheckServiceNodes{
structs.CheckServiceNode{
Node: &structs.Node{
Node: "node1",
},
Service: &structs.NodeService{
ID: "foo",
Service: "foo",
},
Checks: structs.HealthChecks{
&structs.HealthCheck{
Node: "node1",
CheckID: "check1",
ServiceName: "foo",
},
},
},
}
}
// Try permissive filtering.
{
nodes := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.AllowAll(), nil, false)
filt.filterCheckServiceNodes(&nodes)
if len(nodes) != 1 {
t.Fatalf("bad: %#v", nodes)
}
if len(nodes[0].Checks) != 1 {
t.Fatalf("bad: %#v", nodes[0].Checks)
}
}
// Try restrictive filtering.
{
nodes := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.DenyAll(), nil, false)
filt.filterCheckServiceNodes(&nodes)
if len(nodes) != 0 {
t.Fatalf("bad: %#v", nodes)
}
}
// Allowed to see the service but not the node.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err := acl.NewPolicyFromSource("", 0, `
service "foo" {
policy = "read"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err := acl.NewPolicyAuthorizerWithDefaults(acl.DenyAll(), []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// This will work because version 8 ACLs aren't being enforced.
{
nodes := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, false)
filt.filterCheckServiceNodes(&nodes)
if len(nodes) != 1 {
t.Fatalf("bad: %#v", nodes)
}
if len(nodes[0].Checks) != 1 {
t.Fatalf("bad: %#v", nodes[0].Checks)
}
}
// But with version 8 the node will block it.
{
nodes := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, true)
filt.filterCheckServiceNodes(&nodes)
if len(nodes) != 0 {
t.Fatalf("bad: %#v", nodes)
}
}
// Chain on access to the node.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err = acl.NewPolicyFromSource("", 0, `
node "node1" {
policy = "read"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err = acl.NewPolicyAuthorizerWithDefaults(perms, []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// Now it should go through.
{
nodes := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, true)
filt.filterCheckServiceNodes(&nodes)
if len(nodes) != 1 {
t.Fatalf("bad: %#v", nodes)
}
if len(nodes[0].Checks) != 1 {
t.Fatalf("bad: %#v", nodes[0].Checks)
}
}
}
func TestACL_filterCoordinates(t *testing.T) {
2017-05-22 22:14:27 +00:00
t.Parallel()
// Create some coordinates.
coords := structs.Coordinates{
&structs.Coordinate{
Node: "node1",
Coord: generateRandomCoordinate(),
},
&structs.Coordinate{
Node: "node2",
Coord: generateRandomCoordinate(),
},
}
// Try permissive filtering.
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.AllowAll(), nil, false)
filt.filterCoordinates(&coords)
if len(coords) != 2 {
t.Fatalf("bad: %#v", coords)
}
// Try restrictive filtering without version 8 ACL enforcement.
2017-04-21 00:02:42 +00:00
filt = newACLFilter(acl.DenyAll(), nil, false)
filt.filterCoordinates(&coords)
if len(coords) != 2 {
t.Fatalf("bad: %#v", coords)
}
// Try restrictive filtering with version 8 ACL enforcement.
2017-04-21 00:02:42 +00:00
filt = newACLFilter(acl.DenyAll(), nil, true)
filt.filterCoordinates(&coords)
if len(coords) != 0 {
t.Fatalf("bad: %#v", coords)
}
}
func TestACL_filterSessions(t *testing.T) {
2017-05-22 22:14:27 +00:00
t.Parallel()
// Create a session list.
sessions := structs.Sessions{
&structs.Session{
Node: "foo",
},
&structs.Session{
Node: "bar",
},
}
// Try permissive filtering.
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.AllowAll(), nil, true)
filt.filterSessions(&sessions)
if len(sessions) != 2 {
t.Fatalf("bad: %#v", sessions)
}
// Try restrictive filtering but with version 8 enforcement turned off.
2017-04-21 00:02:42 +00:00
filt = newACLFilter(acl.DenyAll(), nil, false)
filt.filterSessions(&sessions)
if len(sessions) != 2 {
t.Fatalf("bad: %#v", sessions)
}
// Try restrictive filtering with version 8 enforcement turned on.
2017-04-21 00:02:42 +00:00
filt = newACLFilter(acl.DenyAll(), nil, true)
filt.filterSessions(&sessions)
if len(sessions) != 0 {
t.Fatalf("bad: %#v", sessions)
}
}
func TestACL_filterNodeDump(t *testing.T) {
2017-05-22 22:14:27 +00:00
t.Parallel()
// Create a node dump.
fill := func() structs.NodeDump {
return structs.NodeDump{
&structs.NodeInfo{
Node: "node1",
Services: []*structs.NodeService{
&structs.NodeService{
ID: "foo",
Service: "foo",
},
},
Checks: []*structs.HealthCheck{
&structs.HealthCheck{
Node: "node1",
CheckID: "check1",
ServiceName: "foo",
},
},
},
}
}
// Try permissive filtering.
{
dump := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.AllowAll(), nil, false)
filt.filterNodeDump(&dump)
if len(dump) != 1 {
t.Fatalf("bad: %#v", dump)
}
if len(dump[0].Services) != 1 {
t.Fatalf("bad: %#v", dump[0].Services)
}
if len(dump[0].Checks) != 1 {
t.Fatalf("bad: %#v", dump[0].Checks)
}
}
// Try restrictive filtering.
{
dump := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.DenyAll(), nil, false)
filt.filterNodeDump(&dump)
if len(dump) != 1 {
t.Fatalf("bad: %#v", dump)
}
if len(dump[0].Services) != 0 {
t.Fatalf("bad: %#v", dump[0].Services)
}
if len(dump[0].Checks) != 0 {
t.Fatalf("bad: %#v", dump[0].Checks)
}
}
// Allowed to see the service but not the node.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err := acl.NewPolicyFromSource("", 0, `
service "foo" {
policy = "read"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err := acl.NewPolicyAuthorizerWithDefaults(acl.DenyAll(), []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// This will work because version 8 ACLs aren't being enforced.
{
dump := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, false)
filt.filterNodeDump(&dump)
if len(dump) != 1 {
t.Fatalf("bad: %#v", dump)
}
if len(dump[0].Services) != 1 {
t.Fatalf("bad: %#v", dump[0].Services)
}
if len(dump[0].Checks) != 1 {
t.Fatalf("bad: %#v", dump[0].Checks)
}
}
// But with version 8 the node will block it.
{
dump := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, true)
filt.filterNodeDump(&dump)
if len(dump) != 0 {
t.Fatalf("bad: %#v", dump)
}
}
// Chain on access to the node.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err = acl.NewPolicyFromSource("", 0, `
node "node1" {
policy = "read"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err = acl.NewPolicyAuthorizerWithDefaults(perms, []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// Now it should go through.
{
dump := fill()
2017-04-21 00:02:42 +00:00
filt := newACLFilter(perms, nil, true)
filt.filterNodeDump(&dump)
if len(dump) != 1 {
t.Fatalf("bad: %#v", dump)
}
if len(dump[0].Services) != 1 {
t.Fatalf("bad: %#v", dump[0].Services)
}
if len(dump[0].Checks) != 1 {
t.Fatalf("bad: %#v", dump[0].Checks)
}
}
}
func TestACL_filterNodes(t *testing.T) {
2017-05-22 22:14:27 +00:00
t.Parallel()
// Create a nodes list.
nodes := structs.Nodes{
&structs.Node{
Node: "foo",
},
&structs.Node{
Node: "bar",
},
}
// Try permissive filtering.
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.AllowAll(), nil, true)
filt.filterNodes(&nodes)
if len(nodes) != 2 {
t.Fatalf("bad: %#v", nodes)
}
// Try restrictive filtering but with version 8 enforcement turned off.
2017-04-21 00:02:42 +00:00
filt = newACLFilter(acl.DenyAll(), nil, false)
filt.filterNodes(&nodes)
if len(nodes) != 2 {
t.Fatalf("bad: %#v", nodes)
}
// Try restrictive filtering with version 8 enforcement turned on.
2017-04-21 00:02:42 +00:00
filt = newACLFilter(acl.DenyAll(), nil, true)
filt.filterNodes(&nodes)
if len(nodes) != 0 {
t.Fatalf("bad: %#v", nodes)
}
}
func TestACL_redactPreparedQueryTokens(t *testing.T) {
2017-05-22 22:14:27 +00:00
t.Parallel()
query := &structs.PreparedQuery{
ID: "f004177f-2c28-83b7-4229-eacc25fe55d1",
Token: "root",
}
expected := &structs.PreparedQuery{
ID: "f004177f-2c28-83b7-4229-eacc25fe55d1",
Token: "root",
}
// Try permissive filtering with a management token. This will allow the
// embedded token to be seen.
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.ManageAll(), nil, false)
filt.redactPreparedQueryTokens(&query)
if !reflect.DeepEqual(query, expected) {
t.Fatalf("bad: %#v", &query)
}
// Hang on to the entry with a token, which needs to survive the next
// operation.
original := query
// Now try permissive filtering with a client token, which should cause
// the embedded token to get redacted.
2017-04-21 00:02:42 +00:00
filt = newACLFilter(acl.AllowAll(), nil, false)
filt.redactPreparedQueryTokens(&query)
expected.Token = redactedToken
if !reflect.DeepEqual(query, expected) {
t.Fatalf("bad: %#v", *query)
}
// Make sure that the original object didn't lose its token.
if original.Token != "root" {
t.Fatalf("bad token: %s", original.Token)
}
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
func TestACL_redactTokenSecret(t *testing.T) {
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: true,
localPolicies: true,
// No need to provide any of the RPC callbacks
}
r := newTestACLResolver(t, delegate, nil)
token := &structs.ACLToken{
AccessorID: "6a5e25b3-28f2-4085-9012-c3fb754314d1",
SecretID: "6a5e25b3-28f2-4085-9012-c3fb754314d1",
}
err := r.filterACL("acl-wr", &token)
require.NoError(t, err)
require.Equal(t, "6a5e25b3-28f2-4085-9012-c3fb754314d1", token.SecretID)
err = r.filterACL("acl-ro", &token)
require.NoError(t, err)
require.Equal(t, redactedToken, token.SecretID)
}
func TestACL_redactTokenSecrets(t *testing.T) {
t.Parallel()
delegate := &ACLResolverTestDelegate{
enabled: true,
datacenter: "dc1",
legacy: false,
localTokens: true,
localPolicies: true,
// No need to provide any of the RPC callbacks
}
r := newTestACLResolver(t, delegate, nil)
tokens := structs.ACLTokens{
&structs.ACLToken{
AccessorID: "6a5e25b3-28f2-4085-9012-c3fb754314d1",
SecretID: "6a5e25b3-28f2-4085-9012-c3fb754314d1",
},
}
err := r.filterACL("acl-wr", &tokens)
require.NoError(t, err)
require.Equal(t, "6a5e25b3-28f2-4085-9012-c3fb754314d1", tokens[0].SecretID)
err = r.filterACL("acl-ro", &tokens)
require.NoError(t, err)
require.Equal(t, redactedToken, tokens[0].SecretID)
}
Creates new "prepared-query" ACL type and new token capture behavior. Prior to this change, prepared queries had the following behavior for ACLs, which will need to change to support templates: 1. A management token, or a token with read access to the service being queried needed to be provided in order to create a prepared query. 2. The token used to create the prepared query was stored with the query in the state store and used to execute the query. 3. A management token, or the token used to create the query needed to be supplied to perform and CRUD operations on an existing prepared query. This was pretty subtle and complicated behavior, and won't work for templates since the service name is computed at execution time. To solve this, we introduce a new "prepared-query" ACL type, where the prefix applies to the query name for static prepared query types and to the prefix for template prepared query types. With this change, the new behavior is: 1. A management token, or a token with "prepared-query" write access to the query name or (soon) the given template prefix is required to do any CRUD operations on a prepared query, or to list prepared queries (the list is filtered by this ACL). 2. You will no longer need a management token to list prepared queries, but you will only be able to see prepared queries that you have access to (you get an empty list instead of permission denied). 3. When listing or getting a query, because it was easy to capture management tokens given the past behavior, this will always blank out the "Token" field (replacing the contents as <hidden>) for all tokens unless a management token is supplied. Going forward, we should discourage people from binding tokens for execution unless strictly necessary. 4. No token will be captured by default when a prepared query is created. If the user wishes to supply an execution token then can pass it in via the "Token" field in the prepared query definition. Otherwise, this field will default to empty. 5. At execution time, we will use the captured token if it exists with the prepared query definition, otherwise we will use the token that's passed in with the request, just like we do for other RPCs (or you can use the agent's configured token for DNS). 6. Prepared queries with no name (accessible only by ID) will not require ACLs to create or modify (execution time will depend on the service ACL configuration). Our argument here is that these are designed to be ephemeral and the IDs are as good as an ACL. Management tokens will be able to list all of these. These changes enable templates, but also enable delegation of authority to manage the prepared query namespace.
2016-02-23 08:12:58 +00:00
func TestACL_filterPreparedQueries(t *testing.T) {
2017-05-22 22:14:27 +00:00
t.Parallel()
Creates new "prepared-query" ACL type and new token capture behavior. Prior to this change, prepared queries had the following behavior for ACLs, which will need to change to support templates: 1. A management token, or a token with read access to the service being queried needed to be provided in order to create a prepared query. 2. The token used to create the prepared query was stored with the query in the state store and used to execute the query. 3. A management token, or the token used to create the query needed to be supplied to perform and CRUD operations on an existing prepared query. This was pretty subtle and complicated behavior, and won't work for templates since the service name is computed at execution time. To solve this, we introduce a new "prepared-query" ACL type, where the prefix applies to the query name for static prepared query types and to the prefix for template prepared query types. With this change, the new behavior is: 1. A management token, or a token with "prepared-query" write access to the query name or (soon) the given template prefix is required to do any CRUD operations on a prepared query, or to list prepared queries (the list is filtered by this ACL). 2. You will no longer need a management token to list prepared queries, but you will only be able to see prepared queries that you have access to (you get an empty list instead of permission denied). 3. When listing or getting a query, because it was easy to capture management tokens given the past behavior, this will always blank out the "Token" field (replacing the contents as <hidden>) for all tokens unless a management token is supplied. Going forward, we should discourage people from binding tokens for execution unless strictly necessary. 4. No token will be captured by default when a prepared query is created. If the user wishes to supply an execution token then can pass it in via the "Token" field in the prepared query definition. Otherwise, this field will default to empty. 5. At execution time, we will use the captured token if it exists with the prepared query definition, otherwise we will use the token that's passed in with the request, just like we do for other RPCs (or you can use the agent's configured token for DNS). 6. Prepared queries with no name (accessible only by ID) will not require ACLs to create or modify (execution time will depend on the service ACL configuration). Our argument here is that these are designed to be ephemeral and the IDs are as good as an ACL. Management tokens will be able to list all of these. These changes enable templates, but also enable delegation of authority to manage the prepared query namespace.
2016-02-23 08:12:58 +00:00
queries := structs.PreparedQueries{
&structs.PreparedQuery{
ID: "f004177f-2c28-83b7-4229-eacc25fe55d1",
},
&structs.PreparedQuery{
ID: "f004177f-2c28-83b7-4229-eacc25fe55d2",
Name: "query-with-no-token",
},
&structs.PreparedQuery{
ID: "f004177f-2c28-83b7-4229-eacc25fe55d3",
Name: "query-with-a-token",
Creates new "prepared-query" ACL type and new token capture behavior. Prior to this change, prepared queries had the following behavior for ACLs, which will need to change to support templates: 1. A management token, or a token with read access to the service being queried needed to be provided in order to create a prepared query. 2. The token used to create the prepared query was stored with the query in the state store and used to execute the query. 3. A management token, or the token used to create the query needed to be supplied to perform and CRUD operations on an existing prepared query. This was pretty subtle and complicated behavior, and won't work for templates since the service name is computed at execution time. To solve this, we introduce a new "prepared-query" ACL type, where the prefix applies to the query name for static prepared query types and to the prefix for template prepared query types. With this change, the new behavior is: 1. A management token, or a token with "prepared-query" write access to the query name or (soon) the given template prefix is required to do any CRUD operations on a prepared query, or to list prepared queries (the list is filtered by this ACL). 2. You will no longer need a management token to list prepared queries, but you will only be able to see prepared queries that you have access to (you get an empty list instead of permission denied). 3. When listing or getting a query, because it was easy to capture management tokens given the past behavior, this will always blank out the "Token" field (replacing the contents as <hidden>) for all tokens unless a management token is supplied. Going forward, we should discourage people from binding tokens for execution unless strictly necessary. 4. No token will be captured by default when a prepared query is created. If the user wishes to supply an execution token then can pass it in via the "Token" field in the prepared query definition. Otherwise, this field will default to empty. 5. At execution time, we will use the captured token if it exists with the prepared query definition, otherwise we will use the token that's passed in with the request, just like we do for other RPCs (or you can use the agent's configured token for DNS). 6. Prepared queries with no name (accessible only by ID) will not require ACLs to create or modify (execution time will depend on the service ACL configuration). Our argument here is that these are designed to be ephemeral and the IDs are as good as an ACL. Management tokens will be able to list all of these. These changes enable templates, but also enable delegation of authority to manage the prepared query namespace.
2016-02-23 08:12:58 +00:00
Token: "root",
},
}
expected := structs.PreparedQueries{
&structs.PreparedQuery{
ID: "f004177f-2c28-83b7-4229-eacc25fe55d1",
},
&structs.PreparedQuery{
ID: "f004177f-2c28-83b7-4229-eacc25fe55d2",
Name: "query-with-no-token",
},
&structs.PreparedQuery{
ID: "f004177f-2c28-83b7-4229-eacc25fe55d3",
Name: "query-with-a-token",
Creates new "prepared-query" ACL type and new token capture behavior. Prior to this change, prepared queries had the following behavior for ACLs, which will need to change to support templates: 1. A management token, or a token with read access to the service being queried needed to be provided in order to create a prepared query. 2. The token used to create the prepared query was stored with the query in the state store and used to execute the query. 3. A management token, or the token used to create the query needed to be supplied to perform and CRUD operations on an existing prepared query. This was pretty subtle and complicated behavior, and won't work for templates since the service name is computed at execution time. To solve this, we introduce a new "prepared-query" ACL type, where the prefix applies to the query name for static prepared query types and to the prefix for template prepared query types. With this change, the new behavior is: 1. A management token, or a token with "prepared-query" write access to the query name or (soon) the given template prefix is required to do any CRUD operations on a prepared query, or to list prepared queries (the list is filtered by this ACL). 2. You will no longer need a management token to list prepared queries, but you will only be able to see prepared queries that you have access to (you get an empty list instead of permission denied). 3. When listing or getting a query, because it was easy to capture management tokens given the past behavior, this will always blank out the "Token" field (replacing the contents as <hidden>) for all tokens unless a management token is supplied. Going forward, we should discourage people from binding tokens for execution unless strictly necessary. 4. No token will be captured by default when a prepared query is created. If the user wishes to supply an execution token then can pass it in via the "Token" field in the prepared query definition. Otherwise, this field will default to empty. 5. At execution time, we will use the captured token if it exists with the prepared query definition, otherwise we will use the token that's passed in with the request, just like we do for other RPCs (or you can use the agent's configured token for DNS). 6. Prepared queries with no name (accessible only by ID) will not require ACLs to create or modify (execution time will depend on the service ACL configuration). Our argument here is that these are designed to be ephemeral and the IDs are as good as an ACL. Management tokens will be able to list all of these. These changes enable templates, but also enable delegation of authority to manage the prepared query namespace.
2016-02-23 08:12:58 +00:00
Token: "root",
},
}
// Try permissive filtering with a management token. This will allow the
// embedded token to be seen.
2017-04-21 00:02:42 +00:00
filt := newACLFilter(acl.ManageAll(), nil, false)
Creates new "prepared-query" ACL type and new token capture behavior. Prior to this change, prepared queries had the following behavior for ACLs, which will need to change to support templates: 1. A management token, or a token with read access to the service being queried needed to be provided in order to create a prepared query. 2. The token used to create the prepared query was stored with the query in the state store and used to execute the query. 3. A management token, or the token used to create the query needed to be supplied to perform and CRUD operations on an existing prepared query. This was pretty subtle and complicated behavior, and won't work for templates since the service name is computed at execution time. To solve this, we introduce a new "prepared-query" ACL type, where the prefix applies to the query name for static prepared query types and to the prefix for template prepared query types. With this change, the new behavior is: 1. A management token, or a token with "prepared-query" write access to the query name or (soon) the given template prefix is required to do any CRUD operations on a prepared query, or to list prepared queries (the list is filtered by this ACL). 2. You will no longer need a management token to list prepared queries, but you will only be able to see prepared queries that you have access to (you get an empty list instead of permission denied). 3. When listing or getting a query, because it was easy to capture management tokens given the past behavior, this will always blank out the "Token" field (replacing the contents as <hidden>) for all tokens unless a management token is supplied. Going forward, we should discourage people from binding tokens for execution unless strictly necessary. 4. No token will be captured by default when a prepared query is created. If the user wishes to supply an execution token then can pass it in via the "Token" field in the prepared query definition. Otherwise, this field will default to empty. 5. At execution time, we will use the captured token if it exists with the prepared query definition, otherwise we will use the token that's passed in with the request, just like we do for other RPCs (or you can use the agent's configured token for DNS). 6. Prepared queries with no name (accessible only by ID) will not require ACLs to create or modify (execution time will depend on the service ACL configuration). Our argument here is that these are designed to be ephemeral and the IDs are as good as an ACL. Management tokens will be able to list all of these. These changes enable templates, but also enable delegation of authority to manage the prepared query namespace.
2016-02-23 08:12:58 +00:00
filt.filterPreparedQueries(&queries)
if !reflect.DeepEqual(queries, expected) {
t.Fatalf("bad: %#v", queries)
}
// Hang on to the entry with a token, which needs to survive the next
// operation.
original := queries[2]
Creates new "prepared-query" ACL type and new token capture behavior. Prior to this change, prepared queries had the following behavior for ACLs, which will need to change to support templates: 1. A management token, or a token with read access to the service being queried needed to be provided in order to create a prepared query. 2. The token used to create the prepared query was stored with the query in the state store and used to execute the query. 3. A management token, or the token used to create the query needed to be supplied to perform and CRUD operations on an existing prepared query. This was pretty subtle and complicated behavior, and won't work for templates since the service name is computed at execution time. To solve this, we introduce a new "prepared-query" ACL type, where the prefix applies to the query name for static prepared query types and to the prefix for template prepared query types. With this change, the new behavior is: 1. A management token, or a token with "prepared-query" write access to the query name or (soon) the given template prefix is required to do any CRUD operations on a prepared query, or to list prepared queries (the list is filtered by this ACL). 2. You will no longer need a management token to list prepared queries, but you will only be able to see prepared queries that you have access to (you get an empty list instead of permission denied). 3. When listing or getting a query, because it was easy to capture management tokens given the past behavior, this will always blank out the "Token" field (replacing the contents as <hidden>) for all tokens unless a management token is supplied. Going forward, we should discourage people from binding tokens for execution unless strictly necessary. 4. No token will be captured by default when a prepared query is created. If the user wishes to supply an execution token then can pass it in via the "Token" field in the prepared query definition. Otherwise, this field will default to empty. 5. At execution time, we will use the captured token if it exists with the prepared query definition, otherwise we will use the token that's passed in with the request, just like we do for other RPCs (or you can use the agent's configured token for DNS). 6. Prepared queries with no name (accessible only by ID) will not require ACLs to create or modify (execution time will depend on the service ACL configuration). Our argument here is that these are designed to be ephemeral and the IDs are as good as an ACL. Management tokens will be able to list all of these. These changes enable templates, but also enable delegation of authority to manage the prepared query namespace.
2016-02-23 08:12:58 +00:00
// Now try permissive filtering with a client token, which should cause
// the embedded token to get redacted, and the query with no name to get
// filtered out.
2017-04-21 00:02:42 +00:00
filt = newACLFilter(acl.AllowAll(), nil, false)
Creates new "prepared-query" ACL type and new token capture behavior. Prior to this change, prepared queries had the following behavior for ACLs, which will need to change to support templates: 1. A management token, or a token with read access to the service being queried needed to be provided in order to create a prepared query. 2. The token used to create the prepared query was stored with the query in the state store and used to execute the query. 3. A management token, or the token used to create the query needed to be supplied to perform and CRUD operations on an existing prepared query. This was pretty subtle and complicated behavior, and won't work for templates since the service name is computed at execution time. To solve this, we introduce a new "prepared-query" ACL type, where the prefix applies to the query name for static prepared query types and to the prefix for template prepared query types. With this change, the new behavior is: 1. A management token, or a token with "prepared-query" write access to the query name or (soon) the given template prefix is required to do any CRUD operations on a prepared query, or to list prepared queries (the list is filtered by this ACL). 2. You will no longer need a management token to list prepared queries, but you will only be able to see prepared queries that you have access to (you get an empty list instead of permission denied). 3. When listing or getting a query, because it was easy to capture management tokens given the past behavior, this will always blank out the "Token" field (replacing the contents as <hidden>) for all tokens unless a management token is supplied. Going forward, we should discourage people from binding tokens for execution unless strictly necessary. 4. No token will be captured by default when a prepared query is created. If the user wishes to supply an execution token then can pass it in via the "Token" field in the prepared query definition. Otherwise, this field will default to empty. 5. At execution time, we will use the captured token if it exists with the prepared query definition, otherwise we will use the token that's passed in with the request, just like we do for other RPCs (or you can use the agent's configured token for DNS). 6. Prepared queries with no name (accessible only by ID) will not require ACLs to create or modify (execution time will depend on the service ACL configuration). Our argument here is that these are designed to be ephemeral and the IDs are as good as an ACL. Management tokens will be able to list all of these. These changes enable templates, but also enable delegation of authority to manage the prepared query namespace.
2016-02-23 08:12:58 +00:00
filt.filterPreparedQueries(&queries)
expected[2].Token = redactedToken
expected = append(structs.PreparedQueries{}, expected[1], expected[2])
Creates new "prepared-query" ACL type and new token capture behavior. Prior to this change, prepared queries had the following behavior for ACLs, which will need to change to support templates: 1. A management token, or a token with read access to the service being queried needed to be provided in order to create a prepared query. 2. The token used to create the prepared query was stored with the query in the state store and used to execute the query. 3. A management token, or the token used to create the query needed to be supplied to perform and CRUD operations on an existing prepared query. This was pretty subtle and complicated behavior, and won't work for templates since the service name is computed at execution time. To solve this, we introduce a new "prepared-query" ACL type, where the prefix applies to the query name for static prepared query types and to the prefix for template prepared query types. With this change, the new behavior is: 1. A management token, or a token with "prepared-query" write access to the query name or (soon) the given template prefix is required to do any CRUD operations on a prepared query, or to list prepared queries (the list is filtered by this ACL). 2. You will no longer need a management token to list prepared queries, but you will only be able to see prepared queries that you have access to (you get an empty list instead of permission denied). 3. When listing or getting a query, because it was easy to capture management tokens given the past behavior, this will always blank out the "Token" field (replacing the contents as <hidden>) for all tokens unless a management token is supplied. Going forward, we should discourage people from binding tokens for execution unless strictly necessary. 4. No token will be captured by default when a prepared query is created. If the user wishes to supply an execution token then can pass it in via the "Token" field in the prepared query definition. Otherwise, this field will default to empty. 5. At execution time, we will use the captured token if it exists with the prepared query definition, otherwise we will use the token that's passed in with the request, just like we do for other RPCs (or you can use the agent's configured token for DNS). 6. Prepared queries with no name (accessible only by ID) will not require ACLs to create or modify (execution time will depend on the service ACL configuration). Our argument here is that these are designed to be ephemeral and the IDs are as good as an ACL. Management tokens will be able to list all of these. These changes enable templates, but also enable delegation of authority to manage the prepared query namespace.
2016-02-23 08:12:58 +00:00
if !reflect.DeepEqual(queries, expected) {
t.Fatalf("bad: %#v", queries)
}
// Make sure that the original object didn't lose its token.
if original.Token != "root" {
t.Fatalf("bad token: %s", original.Token)
}
// Now try restrictive filtering.
2017-04-21 00:02:42 +00:00
filt = newACLFilter(acl.DenyAll(), nil, false)
Creates new "prepared-query" ACL type and new token capture behavior. Prior to this change, prepared queries had the following behavior for ACLs, which will need to change to support templates: 1. A management token, or a token with read access to the service being queried needed to be provided in order to create a prepared query. 2. The token used to create the prepared query was stored with the query in the state store and used to execute the query. 3. A management token, or the token used to create the query needed to be supplied to perform and CRUD operations on an existing prepared query. This was pretty subtle and complicated behavior, and won't work for templates since the service name is computed at execution time. To solve this, we introduce a new "prepared-query" ACL type, where the prefix applies to the query name for static prepared query types and to the prefix for template prepared query types. With this change, the new behavior is: 1. A management token, or a token with "prepared-query" write access to the query name or (soon) the given template prefix is required to do any CRUD operations on a prepared query, or to list prepared queries (the list is filtered by this ACL). 2. You will no longer need a management token to list prepared queries, but you will only be able to see prepared queries that you have access to (you get an empty list instead of permission denied). 3. When listing or getting a query, because it was easy to capture management tokens given the past behavior, this will always blank out the "Token" field (replacing the contents as <hidden>) for all tokens unless a management token is supplied. Going forward, we should discourage people from binding tokens for execution unless strictly necessary. 4. No token will be captured by default when a prepared query is created. If the user wishes to supply an execution token then can pass it in via the "Token" field in the prepared query definition. Otherwise, this field will default to empty. 5. At execution time, we will use the captured token if it exists with the prepared query definition, otherwise we will use the token that's passed in with the request, just like we do for other RPCs (or you can use the agent's configured token for DNS). 6. Prepared queries with no name (accessible only by ID) will not require ACLs to create or modify (execution time will depend on the service ACL configuration). Our argument here is that these are designed to be ephemeral and the IDs are as good as an ACL. Management tokens will be able to list all of these. These changes enable templates, but also enable delegation of authority to manage the prepared query namespace.
2016-02-23 08:12:58 +00:00
filt.filterPreparedQueries(&queries)
if len(queries) != 0 {
t.Fatalf("bad: %#v", queries)
}
}
func TestACL_unhandledFilterType(t *testing.T) {
2017-05-22 22:14:27 +00:00
t.Parallel()
defer func(t *testing.T) {
if recover() == nil {
t.Fatalf("should panic")
}
}(t)
// Create the server
dir, token, srv, client := testACLFilterServer(t)
defer os.RemoveAll(dir)
defer srv.Shutdown()
defer client.Close()
// Pass an unhandled type into the ACL filter.
srv.filterACL(token, &structs.HealthCheck{})
}
func TestACL_vetRegisterWithACL(t *testing.T) {
2017-05-22 22:14:27 +00:00
t.Parallel()
args := &structs.RegisterRequest{
Node: "nope",
Address: "127.0.0.1",
}
// With a nil ACL, the update should be allowed.
if err := vetRegisterWithACL(nil, args, nil); err != nil {
t.Fatalf("err: %v", err)
}
// Create a basic node policy.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err := acl.NewPolicyFromSource("", 0, `
node "node" {
policy = "write"
2014-08-11 21:01:45 +00:00
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err := acl.NewPolicyAuthorizerWithDefaults(acl.DenyAll(), []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// With that policy, the update should now be blocked for node reasons.
err = vetRegisterWithACL(perms, args, nil)
if !acl.IsErrPermissionDenied(err) {
t.Fatalf("bad: %v", err)
}
// Now use a permitted node name.
args.Node = "node"
if err := vetRegisterWithACL(perms, args, nil); err != nil {
t.Fatalf("err: %v", err)
}
// Build some node info that matches what we have now.
ns := &structs.NodeServices{
Node: &structs.Node{
Node: "node",
Address: "127.0.0.1",
},
Services: make(map[string]*structs.NodeService),
}
// Try to register a service, which should be blocked.
args.Service = &structs.NodeService{
Service: "service",
ID: "my-id",
}
err = vetRegisterWithACL(perms, args, ns)
if !acl.IsErrPermissionDenied(err) {
t.Fatalf("bad: %v", err)
}
// Chain on a basic service policy.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err = acl.NewPolicyFromSource("", 0, `
service "service" {
policy = "write"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err = acl.NewPolicyAuthorizerWithDefaults(perms, []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// With the service ACL, the update should go through.
if err := vetRegisterWithACL(perms, args, ns); err != nil {
t.Fatalf("err: %v", err)
}
// Add an existing service that they are clobbering and aren't allowed
// to write to.
ns.Services["my-id"] = &structs.NodeService{
Service: "other",
ID: "my-id",
}
err = vetRegisterWithACL(perms, args, ns)
if !acl.IsErrPermissionDenied(err) {
t.Fatalf("bad: %v", err)
}
// Chain on a policy that allows them to write to the other service.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err = acl.NewPolicyFromSource("", 0, `
service "other" {
policy = "write"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err = acl.NewPolicyAuthorizerWithDefaults(perms, []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// Now it should go through.
if err := vetRegisterWithACL(perms, args, ns); err != nil {
t.Fatalf("err: %v", err)
}
// Try creating the node and the service at once by having no existing
// node record. This should be ok since we have node and service
// permissions.
if err := vetRegisterWithACL(perms, args, nil); err != nil {
t.Fatalf("err: %v", err)
}
// Add a node-level check to the member, which should be rejected.
args.Check = &structs.HealthCheck{
Node: "node",
}
err = vetRegisterWithACL(perms, args, ns)
if err == nil || !strings.Contains(err.Error(), "check member must be nil") {
t.Fatalf("bad: %v", err)
}
// Move the check into the slice, but give a bad node name.
args.Check.Node = "nope"
args.Checks = append(args.Checks, args.Check)
args.Check = nil
err = vetRegisterWithACL(perms, args, ns)
if err == nil || !strings.Contains(err.Error(), "doesn't match register request node") {
t.Fatalf("bad: %v", err)
}
// Fix the node name, which should now go through.
args.Checks[0].Node = "node"
if err := vetRegisterWithACL(perms, args, ns); err != nil {
t.Fatalf("err: %v", err)
}
// Add a service-level check.
args.Checks = append(args.Checks, &structs.HealthCheck{
Node: "node",
ServiceID: "my-id",
})
if err := vetRegisterWithACL(perms, args, ns); err != nil {
t.Fatalf("err: %v", err)
}
// Try creating everything at once. This should be ok since we have all
// the permissions we need. It also makes sure that we can register a
// new node, service, and associated checks.
if err := vetRegisterWithACL(perms, args, nil); err != nil {
t.Fatalf("err: %v", err)
}
// Nil out the service registration, which'll skip the special case
// and force us to look at the ns data (it will look like we are
// writing to the "other" service which also has "my-id").
args.Service = nil
if err := vetRegisterWithACL(perms, args, ns); err != nil {
t.Fatalf("err: %v", err)
}
// Chain on a policy that forbids them to write to the other service.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err = acl.NewPolicyFromSource("", 0, `
service "other" {
policy = "deny"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err = acl.NewPolicyAuthorizerWithDefaults(perms, []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// This should get rejected.
err = vetRegisterWithACL(perms, args, ns)
if !acl.IsErrPermissionDenied(err) {
t.Fatalf("bad: %v", err)
}
// Change the existing service data to point to a service name they
// car write to. This should go through.
ns.Services["my-id"] = &structs.NodeService{
Service: "service",
ID: "my-id",
}
if err := vetRegisterWithACL(perms, args, ns); err != nil {
t.Fatalf("err: %v", err)
}
// Chain on a policy that forbids them to write to the node.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err = acl.NewPolicyFromSource("", 0, `
node "node" {
policy = "deny"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
perms, err = acl.NewPolicyAuthorizerWithDefaults(perms, []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
// This should get rejected because there's a node-level check in here.
err = vetRegisterWithACL(perms, args, ns)
if !acl.IsErrPermissionDenied(err) {
t.Fatalf("bad: %v", err)
}
// Change the node-level check into a service check, and then it should
// go through.
args.Checks[0].ServiceID = "my-id"
if err := vetRegisterWithACL(perms, args, ns); err != nil {
t.Fatalf("err: %v", err)
}
// Finally, attempt to update the node part of the data and make sure
// that gets rejected since they no longer have permissions.
args.Address = "127.0.0.2"
err = vetRegisterWithACL(perms, args, ns)
if !acl.IsErrPermissionDenied(err) {
t.Fatalf("bad: %v", err)
}
2014-08-11 21:01:45 +00:00
}
func TestACL_vetDeregisterWithACL(t *testing.T) {
2017-05-22 22:14:27 +00:00
t.Parallel()
args := &structs.DeregisterRequest{
Node: "nope",
}
// With a nil ACL, the update should be allowed.
if err := vetDeregisterWithACL(nil, args, nil, nil); err != nil {
t.Fatalf("err: %v", err)
}
// Create a basic node policy.
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
policy, err := acl.NewPolicyFromSource("", 0, `
node "node" {
policy = "write"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
nodePerms, err := acl.NewPolicyAuthorizerWithDefaults(acl.DenyAll(), []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
policy, err = acl.NewPolicyFromSource("", 0, `
service "my-service" {
policy = "write"
}
`, acl.SyntaxLegacy, nil, nil)
if err != nil {
t.Fatalf("err %v", err)
}
servicePerms, err := acl.NewPolicyAuthorizerWithDefaults(acl.DenyAll(), []*acl.Policy{policy}, nil)
if err != nil {
t.Fatalf("err: %v", err)
}
for _, args := range []struct {
DeregisterRequest structs.DeregisterRequest
Service *structs.NodeService
Check *structs.HealthCheck
Perms acl.Authorizer
Expected bool
Name string
}{
{
DeregisterRequest: structs.DeregisterRequest{
Node: "nope",
},
Perms: nodePerms,
Expected: false,
Name: "no right on node",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "nope",
},
Perms: servicePerms,
Expected: false,
Name: "right on service but node dergister request",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "nope",
ServiceID: "my-service-id",
},
Service: &structs.NodeService{
Service: "my-service",
},
Perms: nodePerms,
Expected: false,
Name: "no rights on node nor service",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "nope",
ServiceID: "my-service-id",
},
Service: &structs.NodeService{
Service: "my-service",
},
Perms: servicePerms,
Expected: true,
Name: "no rights on node but rights on service",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "nope",
ServiceID: "my-service-id",
CheckID: "my-check",
},
Service: &structs.NodeService{
Service: "my-service",
},
Check: &structs.HealthCheck{
CheckID: "my-check",
},
Perms: nodePerms,
Expected: false,
Name: "no right on node nor service for check",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "nope",
ServiceID: "my-service-id",
CheckID: "my-check",
},
Service: &structs.NodeService{
Service: "my-service",
},
Check: &structs.HealthCheck{
CheckID: "my-check",
},
Perms: servicePerms,
Expected: true,
Name: "no rights on node but rights on service for check",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "nope",
CheckID: "my-check",
},
Check: &structs.HealthCheck{
CheckID: "my-check",
},
Perms: nodePerms,
Expected: false,
Name: "no right on node for node check",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "nope",
CheckID: "my-check",
},
Check: &structs.HealthCheck{
CheckID: "my-check",
},
Perms: servicePerms,
Expected: false,
Name: "rights on service but no right on node for node check",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "node",
},
Perms: nodePerms,
Expected: true,
Name: "rights on node for node",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "node",
},
Perms: servicePerms,
Expected: false,
Name: "rights on service but not on node for node",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "node",
ServiceID: "my-service-id",
},
Service: &structs.NodeService{
Service: "my-service",
},
Perms: nodePerms,
Expected: true,
Name: "rights on node for service",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "node",
ServiceID: "my-service-id",
},
Service: &structs.NodeService{
Service: "my-service",
},
Perms: servicePerms,
Expected: true,
Name: "rights on service for service",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "node",
ServiceID: "my-service-id",
CheckID: "my-check",
},
Service: &structs.NodeService{
Service: "my-service",
},
Check: &structs.HealthCheck{
CheckID: "my-check",
},
Perms: nodePerms,
Expected: true,
Name: "right on node for check",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "node",
ServiceID: "my-service-id",
CheckID: "my-check",
},
Service: &structs.NodeService{
Service: "my-service",
},
Check: &structs.HealthCheck{
CheckID: "my-check",
},
Perms: servicePerms,
Expected: true,
Name: "rights on service for check",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "node",
CheckID: "my-check",
},
Check: &structs.HealthCheck{
CheckID: "my-check",
},
Perms: nodePerms,
Expected: true,
Name: "rights on node for check",
},
{
DeregisterRequest: structs.DeregisterRequest{
Node: "node",
CheckID: "my-check",
},
Check: &structs.HealthCheck{
CheckID: "my-check",
},
Perms: servicePerms,
Expected: false,
Name: "rights on service for node check",
},
} {
t.Run(args.Name, func(t *testing.T) {
err = vetDeregisterWithACL(args.Perms, &args.DeregisterRequest, args.Service, args.Check)
if !args.Expected {
if err == nil {
t.Errorf("expected error with %+v", args.DeregisterRequest)
}
if !acl.IsErrPermissionDenied(err) {
t.Errorf("expected permission denied error with %+v, instead got %+v", args.DeregisterRequest, err)
}
} else if err != nil {
t.Errorf("expected no error with %+v", args.DeregisterRequest)
}
})
}
}
func TestDedupeServiceIdentities(t *testing.T) {
srvid := func(name string, datacenters ...string) *structs.ACLServiceIdentity {
return &structs.ACLServiceIdentity{
ServiceName: name,
Datacenters: datacenters,
}
}
tests := []struct {
name string
in []*structs.ACLServiceIdentity
expect []*structs.ACLServiceIdentity
}{
{
name: "empty",
in: nil,
expect: nil,
},
{
name: "one",
in: []*structs.ACLServiceIdentity{
srvid("foo"),
},
expect: []*structs.ACLServiceIdentity{
srvid("foo"),
},
},
{
name: "just names",
in: []*structs.ACLServiceIdentity{
srvid("fooZ"),
srvid("fooA"),
srvid("fooY"),
srvid("fooB"),
},
expect: []*structs.ACLServiceIdentity{
srvid("fooA"),
srvid("fooB"),
srvid("fooY"),
srvid("fooZ"),
},
},
{
name: "just names with dupes",
in: []*structs.ACLServiceIdentity{
srvid("fooZ"),
srvid("fooA"),
srvid("fooY"),
srvid("fooB"),
srvid("fooA"),
srvid("fooB"),
srvid("fooY"),
srvid("fooZ"),
},
expect: []*structs.ACLServiceIdentity{
srvid("fooA"),
srvid("fooB"),
srvid("fooY"),
srvid("fooZ"),
},
},
{
name: "names with dupes and datacenters",
in: []*structs.ACLServiceIdentity{
srvid("fooZ", "dc2", "dc4"),
srvid("fooA"),
srvid("fooY", "dc1"),
srvid("fooB"),
srvid("fooA", "dc9", "dc8"),
srvid("fooB"),
srvid("fooY", "dc1"),
srvid("fooZ", "dc3", "dc4"),
},
expect: []*structs.ACLServiceIdentity{
srvid("fooA"),
srvid("fooB"),
srvid("fooY", "dc1"),
srvid("fooZ", "dc2", "dc3", "dc4"),
},
},
}
for _, test := range tests {
t.Run(test.name, func(t *testing.T) {
got := dedupeServiceIdentities(test.in)
require.ElementsMatch(t, test.expect, got)
})
}
}