open-consul/ui/packages/consul-ui/tests/acceptance/dc/kvs/update.feature

121 lines
3.9 KiB
Gherkin
Raw Normal View History

2018-05-11 12:47:21 +00:00
@setupApplicationTest
2018-06-04 13:53:51 +00:00
Feature: dc / kvs / update: KV Update
Background:
2018-05-11 12:47:21 +00:00
Given 1 datacenter model with the value "datacenter"
Scenario: Update to [Name] change value to [Value]
2018-05-11 12:47:21 +00:00
And 1 kv model from yaml
---
UI: [BUGFIX] Decode/encode urls (#5206) In https://github.com/hashicorp/consul/commit/858b05fc3127d3d20d9554e932353d767c7b5fdc#diff-46ef88aa04507fb9b039344277531584 we removed encoding values in pathnames as we thought they were eventually being encoded by `ember`. It looks like this isn't the case. Turns out sometimes they are encoded sometimes they aren't. It's complicated. If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206. It's related to the difference between `dynamic` routes and `wildcard` routes. Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding. Where I mention 'conditionally' below, this is detection is what is used for the decision. We conditionally add url encoding to the `{{href-to}}` helper/addon. The reasoning here is, if we are asking for a 'href/url' then whatever we receive back should always be urlencoded. We've done this by reusing as much code from the original `ember-href-to` addon as possible, after this change every call to the `{{href-to}}` helper will be urlencoded. As all links using `{{href-to}}` are now properly urlencoded. We also need to decode them in the correct place 'on the other end', so.. We also override the default `Route.paramsFor` method to conditionally decode all params before passing them to the `Route.model` hook. Lastly (the revert), as we almost consistently use url params to construct API calls, we make sure we re-encode any slugs that have been passed in by the user/developer. The original API for the `createURL` function was to allow you to pass values that didn't need encoding, values that **did** need encoding, followed by query params (which again require url encoding) All in all this should make the entire ember app url encode/decode safe.
2019-01-23 13:46:59 +00:00
Key: "[Name]"
Flags: 12
2018-05-11 12:47:21 +00:00
---
When I visit the kv page for yaml
---
dc: datacenter
UI: [BUGFIX] Decode/encode urls (#5206) In https://github.com/hashicorp/consul/commit/858b05fc3127d3d20d9554e932353d767c7b5fdc#diff-46ef88aa04507fb9b039344277531584 we removed encoding values in pathnames as we thought they were eventually being encoded by `ember`. It looks like this isn't the case. Turns out sometimes they are encoded sometimes they aren't. It's complicated. If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206. It's related to the difference between `dynamic` routes and `wildcard` routes. Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding. Where I mention 'conditionally' below, this is detection is what is used for the decision. We conditionally add url encoding to the `{{href-to}}` helper/addon. The reasoning here is, if we are asking for a 'href/url' then whatever we receive back should always be urlencoded. We've done this by reusing as much code from the original `ember-href-to` addon as possible, after this change every call to the `{{href-to}}` helper will be urlencoded. As all links using `{{href-to}}` are now properly urlencoded. We also need to decode them in the correct place 'on the other end', so.. We also override the default `Route.paramsFor` method to conditionally decode all params before passing them to the `Route.model` hook. Lastly (the revert), as we almost consistently use url params to construct API calls, we make sure we re-encode any slugs that have been passed in by the user/developer. The original API for the `createURL` function was to allow you to pass values that didn't need encoding, values that **did** need encoding, followed by query params (which again require url encoding) All in all this should make the entire ember app url encode/decode safe.
2019-01-23 13:46:59 +00:00
kv: "[Name]"
2018-05-11 12:47:21 +00:00
---
UI: [BUGFIX] Decode/encode urls (#5206) In https://github.com/hashicorp/consul/commit/858b05fc3127d3d20d9554e932353d767c7b5fdc#diff-46ef88aa04507fb9b039344277531584 we removed encoding values in pathnames as we thought they were eventually being encoded by `ember`. It looks like this isn't the case. Turns out sometimes they are encoded sometimes they aren't. It's complicated. If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206. It's related to the difference between `dynamic` routes and `wildcard` routes. Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding. Where I mention 'conditionally' below, this is detection is what is used for the decision. We conditionally add url encoding to the `{{href-to}}` helper/addon. The reasoning here is, if we are asking for a 'href/url' then whatever we receive back should always be urlencoded. We've done this by reusing as much code from the original `ember-href-to` addon as possible, after this change every call to the `{{href-to}}` helper will be urlencoded. As all links using `{{href-to}}` are now properly urlencoded. We also need to decode them in the correct place 'on the other end', so.. We also override the default `Route.paramsFor` method to conditionally decode all params before passing them to the `Route.model` hook. Lastly (the revert), as we almost consistently use url params to construct API calls, we make sure we re-encode any slugs that have been passed in by the user/developer. The original API for the `createURL` function was to allow you to pass values that didn't need encoding, values that **did** need encoding, followed by query params (which again require url encoding) All in all this should make the entire ember app url encode/decode safe.
2019-01-23 13:46:59 +00:00
Then the url should be /datacenter/kv/[EncodedName]/edit
And the title should be "Edit Key/Value - Consul"
# Turn the Code Editor off so we can fill the value easier
And I click "[name=json]"
Then I fill in with yaml
2018-05-11 12:47:21 +00:00
---
value: [Value]
---
And I submit
Then a PUT request was made to "/v1/kv/[EncodedName]?dc=datacenter&flags=12&ns=@!namespace" with the body "[Value]"
And "[data-notification]" has the "notification-update" class
And "[data-notification]" has the "success" class
2018-05-11 12:47:21 +00:00
Where:
UI: [BUGFIX] Decode/encode urls (#5206) In https://github.com/hashicorp/consul/commit/858b05fc3127d3d20d9554e932353d767c7b5fdc#diff-46ef88aa04507fb9b039344277531584 we removed encoding values in pathnames as we thought they were eventually being encoded by `ember`. It looks like this isn't the case. Turns out sometimes they are encoded sometimes they aren't. It's complicated. If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206. It's related to the difference between `dynamic` routes and `wildcard` routes. Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding. Where I mention 'conditionally' below, this is detection is what is used for the decision. We conditionally add url encoding to the `{{href-to}}` helper/addon. The reasoning here is, if we are asking for a 'href/url' then whatever we receive back should always be urlencoded. We've done this by reusing as much code from the original `ember-href-to` addon as possible, after this change every call to the `{{href-to}}` helper will be urlencoded. As all links using `{{href-to}}` are now properly urlencoded. We also need to decode them in the correct place 'on the other end', so.. We also override the default `Route.paramsFor` method to conditionally decode all params before passing them to the `Route.model` hook. Lastly (the revert), as we almost consistently use url params to construct API calls, we make sure we re-encode any slugs that have been passed in by the user/developer. The original API for the `createURL` function was to allow you to pass values that didn't need encoding, values that **did** need encoding, followed by query params (which again require url encoding) All in all this should make the entire ember app url encode/decode safe.
2019-01-23 13:46:59 +00:00
---------------------------------------------------------
| Name | EncodedName | Value |
| key | key | value |
| #key | %23key | value |
| key-name | key-name | a value |
| key name | key%20name | a value |
| folder/key-name | folder/key-name | a value |
---------------------------------------------------------
Scenario: Update to a key change value to ' '
And 1 kv model from yaml
---
Key: key
Flags: 12
---
When I visit the kv page for yaml
---
dc: datacenter
kv: key
---
Then the url should be /datacenter/kv/key/edit
# Turn the Code Editor off so we can fill the value easier
And I click "[name=json]"
Then I fill in with yaml
---
value: ' '
---
And I submit
Then a PUT request was made to "/v1/kv/key?dc=datacenter&flags=12&ns=@!namespace" with the body " "
Then the url should be /datacenter/kv
And the title should be "Key/Value - Consul"
And "[data-notification]" has the "notification-update" class
And "[data-notification]" has the "success" class
Scenario: Update to a key change value to ''
And 1 kv model from yaml
---
Key: key
Flags: 12
---
When I visit the kv page for yaml
---
dc: datacenter
kv: key
---
Then the url should be /datacenter/kv/key/edit
# Turn the Code Editor off so we can fill the value easier
And I click "[name=json]"
Then I fill in with yaml
---
value: ''
---
And I submit
Then a PUT request was made to "/v1/kv/key?dc=datacenter&flags=12&ns=@!namespace" with no body
Then the url should be /datacenter/kv
And "[data-notification]" has the "notification-update" class
And "[data-notification]" has the "success" class
Scenario: Update to a key when the value is empty
And 1 kv model from yaml
---
Key: key
Value: ~
Flags: 12
---
When I visit the kv page for yaml
---
dc: datacenter
kv: key
---
Then the url should be /datacenter/kv/key/edit
And I submit
Then a PUT request was made to "/v1/kv/key?dc=datacenter&flags=12&ns=@!namespace" with no body
Then the url should be /datacenter/kv
And "[data-notification]" has the "notification-update" class
And "[data-notification]" has the "success" class
Scenario: There was an error saving the key
When I visit the kv page for yaml
---
dc: datacenter
kv: key
---
Then the url should be /datacenter/kv/key/edit
Given the url "/v1/kv/key" responds with a 500 status
And I submit
Then the url should be /datacenter/kv/key/edit
Then "[data-notification]" has the "notification-update" class
And "[data-notification]" has the "error" class
2018-06-04 13:53:51 +00:00
@ignore
Scenario: KV's with spaces are saved correctly
Then ok
@ignore
Scenario: KV's with returns are saved correctly
Then ok