open-consul/agent/consul/server_serf.go

452 lines
13 KiB
Go
Raw Normal View History

2013-12-07 01:18:09 +00:00
package consul
2013-12-07 00:54:33 +00:00
2013-12-09 23:29:44 +00:00
import (
"fmt"
"net"
"path/filepath"
"strings"
"time"
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
"github.com/hashicorp/consul/agent/consul/wanfed"
"github.com/hashicorp/consul/agent/metadata"
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
"github.com/hashicorp/consul/agent/structs"
"github.com/hashicorp/consul/lib"
libserf "github.com/hashicorp/consul/lib/serf"
"github.com/hashicorp/consul/logging"
"github.com/hashicorp/go-hclog"
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
"github.com/hashicorp/memberlist"
"github.com/hashicorp/raft"
"github.com/hashicorp/serf/serf"
2013-12-09 23:29:44 +00:00
)
2014-03-20 19:51:49 +00:00
const (
// StatusReap is used to update the status of a node if we
// are handling a EventMemberReap
StatusReap = serf.MemberStatus(-1)
// userEventPrefix is pre-pended to a user event to distinguish it
userEventPrefix = "consul:event:"
// maxPeerRetries limits how many invalidate attempts are made
maxPeerRetries = 6
2014-03-20 19:51:49 +00:00
)
// setupSerf is used to setup and initialize a Serf
func (s *Server) setupSerf(conf *serf.Config, ch chan serf.Event, path string, wan bool, wanPort int,
segment string, listener net.Listener) (*serf.Serf, error) {
conf.Init()
if wan {
conf.NodeName = fmt.Sprintf("%s.%s", s.config.NodeName, s.config.Datacenter)
} else {
conf.NodeName = s.config.NodeName
if wanPort > 0 {
conf.Tags["wan_join_port"] = fmt.Sprintf("%d", wanPort)
}
}
conf.Tags["role"] = "consul"
conf.Tags["dc"] = s.config.Datacenter
conf.Tags["segment"] = segment
conf.Tags["id"] = string(s.config.NodeID)
conf.Tags["vsn"] = fmt.Sprintf("%d", s.config.ProtocolVersion)
conf.Tags["vsn_min"] = fmt.Sprintf("%d", ProtocolVersionMin)
conf.Tags["vsn_max"] = fmt.Sprintf("%d", ProtocolVersionMax)
conf.Tags["raft_vsn"] = fmt.Sprintf("%d", s.config.RaftConfig.ProtocolVersion)
conf.Tags["build"] = s.config.Build
addr := listener.Addr().(*net.TCPAddr)
conf.Tags["port"] = fmt.Sprintf("%d", addr.Port)
if s.config.Bootstrap {
conf.Tags["bootstrap"] = "1"
}
if s.config.BootstrapExpect != 0 {
conf.Tags["expect"] = fmt.Sprintf("%d", s.config.BootstrapExpect)
}
if s.config.ReadReplica {
// DEPRECATED - This tag should be removed when we no longer want to support
// upgrades from 1.8.x and below
conf.Tags["nonvoter"] = "1"
conf.Tags["read_replica"] = "1"
}
if s.config.UseTLS {
conf.Tags["use_tls"] = "1"
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
if s.acls.ACLsEnabled() {
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// we start in legacy mode and allow upgrading later
conf.Tags["acls"] = string(structs.ACLModeLegacy)
} else {
conf.Tags["acls"] = string(structs.ACLModeDisabled)
}
// feature flag: advertise support for federation states
conf.Tags["ft_fs"] = "1"
connect: intentions are now managed as a new config entry kind "service-intentions" (#8834) - Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older copies of consul will not see new config entries it doesn't understand replicate down. - Add shim conversion code so that the old API/CLI method of interacting with intentions will continue to work so long as none of these are edited via config entry endpoints. Almost all of the read-only APIs will continue to function indefinitely. - Add new APIs that operate on individual intentions without IDs so that the UI doesn't need to implement CAS operations. - Add a new serf feature flag indicating support for intentions-as-config-entries. - The old line-item intentions way of interacting with the state store will transparently flip between the legacy memdb table and the config entry representations so that readers will never see a hiccup during migration where the results are incomplete. It uses a piece of system metadata to control the flip. - The primary datacenter will begin migrating intentions into config entries on startup once all servers in the datacenter are on a version of Consul with the intentions-as-config-entries feature flag. When it is complete the old state store representations will be cleared. We also record a piece of system metadata indicating this has occurred. We use this metadata to skip ALL of this code the next time the leader starts up. - The secondary datacenters continue to run the old intentions replicator until all servers in the secondary DC and primary DC support intentions-as-config-entries (via serf flag). Once this condition it met the old intentions replicator ceases. - The secondary datacenters replicate the new config entries as they are migrated in the primary. When they detect that the primary has zeroed it's old state store table it waits until all config entries up to that point are replicated and then zeroes its own copy of the old state store table. We also record a piece of system metadata indicating this has occurred. We use this metadata to skip ALL of this code the next time the leader starts up.
2020-10-06 18:24:05 +00:00
// feature flag: advertise support for service-intentions
conf.Tags["ft_si"] = "1"
var subLoggerName string
if wan {
subLoggerName = logging.WAN
} else {
subLoggerName = logging.LAN
}
// Wrap hclog in a standard logger wrapper for serf and memberlist
// We use the Intercept variant here to ensure that serf and memberlist logs
// can be streamed via the monitor endpoint
serfLogger := s.logger.
NamedIntercept(logging.Serf).
NamedIntercept(subLoggerName).
StandardLoggerIntercept(&hclog.StandardLoggerOptions{InferLevels: true})
memberlistLogger := s.logger.
NamedIntercept(logging.Memberlist).
NamedIntercept(subLoggerName).
StandardLoggerIntercept(&hclog.StandardLoggerOptions{InferLevels: true})
conf.MemberlistConfig.Logger = memberlistLogger
conf.Logger = serfLogger
conf.EventCh = ch
conf.ProtocolVersion = protocolVersionMap[s.config.ProtocolVersion]
conf.RejoinAfterLeave = s.config.RejoinAfterLeave
if wan {
conf.Merge = &wanMergeDelegate{}
} else {
conf.Merge = &lanMergeDelegate{
dc: s.config.Datacenter,
nodeID: s.config.NodeID,
nodeName: s.config.NodeName,
segment: segment,
}
}
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
if wan {
nt, err := memberlist.NewNetTransport(&memberlist.NetTransportConfig{
BindAddrs: []string{conf.MemberlistConfig.BindAddr},
BindPort: conf.MemberlistConfig.BindPort,
Logger: conf.MemberlistConfig.Logger,
})
if err != nil {
return nil, err
}
if s.config.ConnectMeshGatewayWANFederationEnabled {
mgwTransport, err := wanfed.NewTransport(
s.tlsConfigurator,
nt,
s.config.Datacenter,
s.gatewayLocator.PickGateway,
)
if err != nil {
return nil, err
}
conf.MemberlistConfig.Transport = mgwTransport
} else {
conf.MemberlistConfig.Transport = nt
}
}
// Until Consul supports this fully, we disable automatic resolution.
// When enabled, the Serf gossip may just turn off if we are the minority
// node which is rather unexpected.
conf.EnableNameConflictResolution = false
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
if wan && s.config.ConnectMeshGatewayWANFederationEnabled {
conf.MemberlistConfig.RequireNodeNames = true
conf.MemberlistConfig.DisableTcpPingsForNode = func(nodeName string) bool {
_, dc, err := wanfed.SplitNodeName(nodeName)
if err != nil {
return false // don't disable anything if we don't understand the node name
}
// If doing cross-dc we will be using TCP via the gateways so
// there's no need for an extra TCP request.
return s.config.Datacenter != dc
}
}
if !s.config.DevMode {
conf.SnapshotPath = filepath.Join(s.config.DataDir, path)
}
if err := lib.EnsurePath(conf.SnapshotPath, false); err != nil {
return nil, err
}
conf.ReconnectTimeoutOverride = libserf.NewReconnectOverride(s.logger)
s.addEnterpriseSerfTags(conf.Tags)
connect: intentions are now managed as a new config entry kind "service-intentions" (#8834) - Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older copies of consul will not see new config entries it doesn't understand replicate down. - Add shim conversion code so that the old API/CLI method of interacting with intentions will continue to work so long as none of these are edited via config entry endpoints. Almost all of the read-only APIs will continue to function indefinitely. - Add new APIs that operate on individual intentions without IDs so that the UI doesn't need to implement CAS operations. - Add a new serf feature flag indicating support for intentions-as-config-entries. - The old line-item intentions way of interacting with the state store will transparently flip between the legacy memdb table and the config entry representations so that readers will never see a hiccup during migration where the results are incomplete. It uses a piece of system metadata to control the flip. - The primary datacenter will begin migrating intentions into config entries on startup once all servers in the datacenter are on a version of Consul with the intentions-as-config-entries feature flag. When it is complete the old state store representations will be cleared. We also record a piece of system metadata indicating this has occurred. We use this metadata to skip ALL of this code the next time the leader starts up. - The secondary datacenters continue to run the old intentions replicator until all servers in the secondary DC and primary DC support intentions-as-config-entries (via serf flag). Once this condition it met the old intentions replicator ceases. - The secondary datacenters replicate the new config entries as they are migrated in the primary. When they detect that the primary has zeroed it's old state store table it waits until all config entries up to that point are replicated and then zeroes its own copy of the old state store table. We also record a piece of system metadata indicating this has occurred. We use this metadata to skip ALL of this code the next time the leader starts up.
2020-10-06 18:24:05 +00:00
if s.config.OverrideInitialSerfTags != nil {
s.config.OverrideInitialSerfTags(conf.Tags)
}
return serf.Create(conf)
}
2014-08-27 01:50:03 +00:00
// userEventName computes the name of a user event
func userEventName(name string) string {
return userEventPrefix + name
}
// isUserEvent checks if a serf event is a user event
func isUserEvent(name string) bool {
return strings.HasPrefix(name, userEventPrefix)
}
// rawUserEventName is used to get the raw user event name
func rawUserEventName(name string) string {
return strings.TrimPrefix(name, userEventPrefix)
2014-08-27 01:50:03 +00:00
}
2013-12-07 00:54:33 +00:00
// lanEventHandler is used to handle events from the lan Serf cluster
func (s *Server) lanEventHandler() {
for {
select {
case e := <-s.eventChLAN:
2013-12-09 23:29:44 +00:00
switch e.EventType() {
case serf.EventMemberJoin:
s.lanNodeJoin(e.(serf.MemberEvent))
s.localMemberEvent(e.(serf.MemberEvent))
case serf.EventMemberLeave, serf.EventMemberFailed, serf.EventMemberReap:
s.lanNodeFailed(e.(serf.MemberEvent))
s.localMemberEvent(e.(serf.MemberEvent))
2013-12-09 23:29:44 +00:00
case serf.EventUser:
s.localEvent(e.(serf.UserEvent))
2017-03-21 23:36:44 +00:00
case serf.EventMemberUpdate:
s.lanNodeUpdate(e.(serf.MemberEvent))
s.localMemberEvent(e.(serf.MemberEvent))
2014-03-12 19:46:14 +00:00
case serf.EventQuery: // Ignore
2013-12-09 23:29:44 +00:00
default:
s.logger.Warn("Unhandled LAN Serf Event", "event", e)
2013-12-09 23:29:44 +00:00
}
2013-12-07 00:54:33 +00:00
case <-s.shutdownCh:
return
}
}
}
2014-01-09 23:49:09 +00:00
// localMemberEvent is used to reconcile Serf events with the strongly
// consistent store if we are the current leader
func (s *Server) localMemberEvent(me serf.MemberEvent) {
// Do nothing if we are not the leader
if !s.IsLeader() {
return
}
2014-03-20 19:51:49 +00:00
// Check if this is a reap event
isReap := me.EventType() == serf.EventMemberReap
// Queue the members for reconciliation
2014-01-09 23:49:09 +00:00
for _, m := range me.Members {
2014-03-20 19:51:49 +00:00
// Change the status if this is a reap event
if isReap {
m.Status = StatusReap
}
select {
case s.reconcileCh <- m:
default:
}
}
2013-12-09 23:29:44 +00:00
}
// localEvent is called when we receive an event on the local Serf
func (s *Server) localEvent(event serf.UserEvent) {
// Handle only consul events
if !strings.HasPrefix(event.Name, "consul:") {
return
}
switch name := event.Name; {
case name == newLeaderEvent:
s.logger.Info("New leader elected", "payload", string(event.Payload))
// Trigger the callback
if s.config.ServerUp != nil {
s.config.ServerUp()
}
case isUserEvent(name):
event.Name = rawUserEventName(name)
s.logger.Debug("User event", "event", event.Name)
// Trigger the callback
if s.config.UserEventHandler != nil {
s.config.UserEventHandler(event)
}
default:
if !s.handleEnterpriseUserEvents(event) {
s.logger.Warn("Unhandled local event", "event", event)
}
}
}
// lanNodeJoin is used to handle join events on the LAN pool.
func (s *Server) lanNodeJoin(me serf.MemberEvent) {
2013-12-12 00:24:34 +00:00
for _, m := range me.Members {
ok, serverMeta := metadata.IsConsulServer(m)
if !ok || serverMeta.Segment != "" {
2013-12-12 00:24:34 +00:00
continue
}
s.logger.Info("Adding LAN server", "server", serverMeta.String())
// Update server lookup
s.serverLookup.AddServer(serverMeta)
// If we're still expecting to bootstrap, may need to handle this.
if s.config.BootstrapExpect != 0 {
s.maybeBootstrap()
}
2017-03-15 19:26:54 +00:00
// Kick the join flooders.
s.FloodNotify()
}
}
func (s *Server) lanNodeUpdate(me serf.MemberEvent) {
for _, m := range me.Members {
ok, serverMeta := metadata.IsConsulServer(m)
if !ok || serverMeta.Segment != "" {
continue
}
s.logger.Info("Updating LAN server", "server", serverMeta.String())
// Update server lookup
s.serverLookup.AddServer(serverMeta)
}
}
// maybeBootstrap is used to handle bootstrapping when a new consul server joins.
2014-06-18 23:15:28 +00:00
func (s *Server) maybeBootstrap() {
// Bootstrap can only be done if there are no committed logs, remove our
// expectations of bootstrapping. This is slightly cheaper than the full
// check that BootstrapCluster will do, so this is a good pre-filter.
2014-06-18 23:15:28 +00:00
index, err := s.raftStore.LastIndex()
if err != nil {
s.logger.Error("Failed to read last raft index", "error", err)
2014-06-18 23:15:28 +00:00
return
}
if index != 0 {
s.logger.Info("Raft data found, disabling bootstrap mode")
s.config.BootstrapExpect = 0
2014-06-18 23:15:28 +00:00
return
}
// Scan for all the known servers.
2014-06-18 23:15:28 +00:00
members := s.serfLAN.Members()
var servers []metadata.Server
2018-09-20 00:41:36 +00:00
voters := 0
2014-06-18 23:15:28 +00:00
for _, member := range members {
valid, p := metadata.IsConsulServer(member)
2014-06-18 23:15:28 +00:00
if !valid {
continue
}
if p.Datacenter != s.config.Datacenter {
s.logger.Warn("Member has a conflicting datacenter, ignoring", "member", member)
2014-06-18 23:15:28 +00:00
continue
}
if p.Expect != 0 && p.Expect != s.config.BootstrapExpect {
s.logger.Error("Member has a conflicting expect value. All nodes should expect the same number.", "member", member)
2014-06-18 23:15:28 +00:00
return
}
if p.Bootstrap {
s.logger.Error("Member has bootstrap mode. Expect disabled.", "member", member)
2014-06-18 23:15:28 +00:00
return
}
if !p.ReadReplica {
2018-09-20 00:41:36 +00:00
voters++
}
servers = append(servers, *p)
2014-06-18 23:15:28 +00:00
}
// Skip if we haven't met the minimum expect count.
2018-09-20 00:41:36 +00:00
if voters < s.config.BootstrapExpect {
2014-06-18 23:15:28 +00:00
return
}
// Query each of the servers and make sure they report no Raft peers.
for _, server := range servers {
var peers []string
// Retry with exponential backoff to get peer status from this server
for attempt := uint(0); attempt < maxPeerRetries; attempt++ {
if err := s.connPool.RPC(s.config.Datacenter, server.ShortName, server.Addr,
"Status.Peers", &structs.DCSpecificRequest{Datacenter: s.config.Datacenter}, &peers); err != nil {
nextRetry := (1 << attempt) * time.Second
s.logger.Error("Failed to confirm peer status for server (will retry).",
"server", server.Name,
"retry_interval", nextRetry.String(),
"error", err,
)
time.Sleep(nextRetry)
} else {
break
}
}
// Found a node with some Raft peers, stop bootstrap since there's
// evidence of an existing cluster. We should get folded in by the
2016-09-01 06:54:53 +00:00
// existing servers if that's the case, so it's cleaner to sit as a
// candidate with no peers so we don't cause spurious elections.
// It's OK this is racy, because even with an initial bootstrap
// as long as one peer runs bootstrap things will work, and if we
// have multiple peers bootstrap in the same way, that's OK. We
// just don't want a server added much later to do a live bootstrap
// and interfere with the cluster. This isn't required for Raft's
// correctness because no server in the existing cluster will vote
// for this server, but it makes things much more stable.
if len(peers) > 0 {
s.logger.Info("Existing Raft peers reported by server, disabling bootstrap mode", "server", server.Name)
s.config.BootstrapExpect = 0
return
}
}
// Attempt a live bootstrap!
var configuration raft.Configuration
var addrs []string
2017-02-22 20:53:32 +00:00
for _, server := range servers {
addr := server.Addr.String()
addrs = append(addrs, addr)
id := raft.ServerID(server.ID)
2018-09-20 00:41:36 +00:00
suffrage := raft.Voter
if server.ReadReplica {
2018-09-20 00:41:36 +00:00
suffrage = raft.Nonvoter
}
peer := raft.Server{
2018-09-20 00:41:36 +00:00
ID: id,
Address: raft.ServerAddress(addr),
Suffrage: suffrage,
}
configuration.Servers = append(configuration.Servers, peer)
}
s.logger.Info("Found expected number of peers, attempting bootstrap",
"peers", strings.Join(addrs, ","),
)
future := s.raft.BootstrapCluster(configuration)
if err := future.Error(); err != nil {
s.logger.Error("Failed to bootstrap cluster", "error", err)
2014-06-18 23:15:28 +00:00
}
// Bootstrapping complete, or failed for some reason, don't enter this
// again.
s.config.BootstrapExpect = 0
2014-06-18 23:15:28 +00:00
}
// lanNodeFailed is used to handle fail events on the LAN pool.
func (s *Server) lanNodeFailed(me serf.MemberEvent) {
for _, m := range me.Members {
2017-08-30 17:31:36 +00:00
ok, serverMeta := metadata.IsConsulServer(m)
if !ok || serverMeta.Segment != "" {
continue
}
s.logger.Info("Removing LAN server", "server", serverMeta.String())
// Update id to address map
2017-08-30 17:31:36 +00:00
s.serverLookup.RemoveServer(serverMeta)
}
}