open-consul/command/snapshot_restore_test.go

114 lines
2.2 KiB
Go
Raw Normal View History

Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
package command
import (
"io"
"os"
"path"
"strings"
"testing"
pkg refactor command/agent/* -> agent/* command/consul/* -> agent/consul/* command/agent/command{,_test}.go -> command/agent{,_test}.go command/base/command.go -> command/base.go command/base/* -> command/* commands.go -> command/commands.go The script which did the refactor is: ( cd $GOPATH/src/github.com/hashicorp/consul git mv command/agent/command.go command/agent.go git mv command/agent/command_test.go command/agent_test.go git mv command/agent/flag_slice_value{,_test}.go command/ git mv command/agent . git mv command/base/command.go command/base.go git mv command/base/config_util{,_test}.go command/ git mv commands.go command/ git mv consul agent rmdir command/base/ gsed -i -e 's|package agent|package command|' command/agent{,_test}.go gsed -i -e 's|package agent|package command|' command/flag_slice_value{,_test}.go gsed -i -e 's|package base|package command|' command/base.go command/config_util{,_test}.go gsed -i -e 's|package main|package command|' command/commands.go gsed -i -e 's|base.Command|BaseCommand|' command/commands.go gsed -i -e 's|agent.Command|AgentCommand|' command/commands.go gsed -i -e 's|\tCommand:|\tBaseCommand:|' command/commands.go gsed -i -e 's|base\.||' command/commands.go gsed -i -e 's|command\.||' command/commands.go gsed -i -e 's|command|c|' main.go gsed -i -e 's|range Commands|range command.Commands|' main.go gsed -i -e 's|Commands: Commands|Commands: command.Commands|' main.go gsed -i -e 's|base\.BoolValue|BoolValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.DurationValue|DurationValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.StringValue|StringValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.UintValue|UintValue|' command/operator_autopilot_set.go gsed -i -e 's|\bCommand\b|BaseCommand|' command/base.go gsed -i -e 's|BaseCommand Options|Command Options|' command/base.go gsed -i -e 's|base.Command|BaseCommand|' command/*.go gsed -i -e 's|c\.Command|c.BaseCommand|g' command/*.go gsed -i -e 's|\tCommand:|\tBaseCommand:|' command/*_test.go gsed -i -e 's|base\.||' command/*_test.go gsed -i -e 's|\bCommand\b|AgentCommand|' command/agent{,_test}.go gsed -i -e 's|cmd.AgentCommand|cmd.BaseCommand|' command/agent.go gsed -i -e 's|cli.AgentCommand = new(Command)|cli.Command = new(AgentCommand)|' command/agent_test.go gsed -i -e 's|exec.AgentCommand|exec.Command|' command/agent_test.go gsed -i -e 's|exec.BaseCommand|exec.Command|' command/agent_test.go gsed -i -e 's|NewTestAgent|agent.NewTestAgent|' command/agent_test.go gsed -i -e 's|= TestConfig|= agent.TestConfig|' command/agent_test.go gsed -i -e 's|: RetryJoin|: agent.RetryJoin|' command/agent_test.go gsed -i -e 's|\.\./\.\./|../|' command/config_util_test.go gsed -i -e 's|\bverifyUniqueListeners|VerifyUniqueListeners|' agent/config{,_test}.go command/agent.go gsed -i -e 's|\bserfLANKeyring\b|SerfLANKeyring|g' agent/{agent,keyring,testagent}.go command/agent.go gsed -i -e 's|\bserfWANKeyring\b|SerfWANKeyring|g' agent/{agent,keyring,testagent}.go command/agent.go gsed -i -e 's|\bNewAgent\b|agent.New|g' command/agent{,_test}.go gsed -i -e 's|\bNewAgent|New|' agent/{acl_test,agent,testagent}.go gsed -i -e 's|\bAgent\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bBool\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bDefaultConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bDevConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bMergeConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bReadConfigPaths\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bParseMetaPair\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bSerfLANKeyring\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bSerfWANKeyring\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|circonus\.agent|circonus|g' command/agent{,_test}.go gsed -i -e 's|logger\.agent|logger|g' command/agent{,_test}.go gsed -i -e 's|metrics\.agent|metrics|g' command/agent{,_test}.go gsed -i -e 's|// agent.Agent|// agent|' command/agent{,_test}.go gsed -i -e 's|a\.agent\.Config|a.Config|' command/agent{,_test}.go gsed -i -e 's|agent\.AppendSliceValue|AppendSliceValue|' command/{configtest,validate}.go gsed -i -e 's|consul/consul|agent/consul|' GNUmakefile gsed -i -e 's|\.\./test|../../test|' agent/consul/server_test.go # fix imports f=$(grep -rl 'github.com/hashicorp/consul/command/agent' * | grep '\.go') gsed -i -e 's|github.com/hashicorp/consul/command/agent|github.com/hashicorp/consul/agent|' $f goimports -w $f f=$(grep -rl 'github.com/hashicorp/consul/consul' * | grep '\.go') gsed -i -e 's|github.com/hashicorp/consul/consul|github.com/hashicorp/consul/agent/consul|' $f goimports -w $f goimports -w command/*.go main.go )
2017-06-09 22:28:28 +00:00
"github.com/hashicorp/consul/agent"
"github.com/hashicorp/consul/testutil"
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
"github.com/mitchellh/cli"
)
func testSnapshotRestoreCommand(t *testing.T) (*cli.MockUi, *SnapshotRestoreCommand) {
ui := cli.NewMockUi()
return ui, &SnapshotRestoreCommand{
pkg refactor command/agent/* -> agent/* command/consul/* -> agent/consul/* command/agent/command{,_test}.go -> command/agent{,_test}.go command/base/command.go -> command/base.go command/base/* -> command/* commands.go -> command/commands.go The script which did the refactor is: ( cd $GOPATH/src/github.com/hashicorp/consul git mv command/agent/command.go command/agent.go git mv command/agent/command_test.go command/agent_test.go git mv command/agent/flag_slice_value{,_test}.go command/ git mv command/agent . git mv command/base/command.go command/base.go git mv command/base/config_util{,_test}.go command/ git mv commands.go command/ git mv consul agent rmdir command/base/ gsed -i -e 's|package agent|package command|' command/agent{,_test}.go gsed -i -e 's|package agent|package command|' command/flag_slice_value{,_test}.go gsed -i -e 's|package base|package command|' command/base.go command/config_util{,_test}.go gsed -i -e 's|package main|package command|' command/commands.go gsed -i -e 's|base.Command|BaseCommand|' command/commands.go gsed -i -e 's|agent.Command|AgentCommand|' command/commands.go gsed -i -e 's|\tCommand:|\tBaseCommand:|' command/commands.go gsed -i -e 's|base\.||' command/commands.go gsed -i -e 's|command\.||' command/commands.go gsed -i -e 's|command|c|' main.go gsed -i -e 's|range Commands|range command.Commands|' main.go gsed -i -e 's|Commands: Commands|Commands: command.Commands|' main.go gsed -i -e 's|base\.BoolValue|BoolValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.DurationValue|DurationValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.StringValue|StringValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.UintValue|UintValue|' command/operator_autopilot_set.go gsed -i -e 's|\bCommand\b|BaseCommand|' command/base.go gsed -i -e 's|BaseCommand Options|Command Options|' command/base.go gsed -i -e 's|base.Command|BaseCommand|' command/*.go gsed -i -e 's|c\.Command|c.BaseCommand|g' command/*.go gsed -i -e 's|\tCommand:|\tBaseCommand:|' command/*_test.go gsed -i -e 's|base\.||' command/*_test.go gsed -i -e 's|\bCommand\b|AgentCommand|' command/agent{,_test}.go gsed -i -e 's|cmd.AgentCommand|cmd.BaseCommand|' command/agent.go gsed -i -e 's|cli.AgentCommand = new(Command)|cli.Command = new(AgentCommand)|' command/agent_test.go gsed -i -e 's|exec.AgentCommand|exec.Command|' command/agent_test.go gsed -i -e 's|exec.BaseCommand|exec.Command|' command/agent_test.go gsed -i -e 's|NewTestAgent|agent.NewTestAgent|' command/agent_test.go gsed -i -e 's|= TestConfig|= agent.TestConfig|' command/agent_test.go gsed -i -e 's|: RetryJoin|: agent.RetryJoin|' command/agent_test.go gsed -i -e 's|\.\./\.\./|../|' command/config_util_test.go gsed -i -e 's|\bverifyUniqueListeners|VerifyUniqueListeners|' agent/config{,_test}.go command/agent.go gsed -i -e 's|\bserfLANKeyring\b|SerfLANKeyring|g' agent/{agent,keyring,testagent}.go command/agent.go gsed -i -e 's|\bserfWANKeyring\b|SerfWANKeyring|g' agent/{agent,keyring,testagent}.go command/agent.go gsed -i -e 's|\bNewAgent\b|agent.New|g' command/agent{,_test}.go gsed -i -e 's|\bNewAgent|New|' agent/{acl_test,agent,testagent}.go gsed -i -e 's|\bAgent\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bBool\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bDefaultConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bDevConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bMergeConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bReadConfigPaths\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bParseMetaPair\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bSerfLANKeyring\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bSerfWANKeyring\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|circonus\.agent|circonus|g' command/agent{,_test}.go gsed -i -e 's|logger\.agent|logger|g' command/agent{,_test}.go gsed -i -e 's|metrics\.agent|metrics|g' command/agent{,_test}.go gsed -i -e 's|// agent.Agent|// agent|' command/agent{,_test}.go gsed -i -e 's|a\.agent\.Config|a.Config|' command/agent{,_test}.go gsed -i -e 's|agent\.AppendSliceValue|AppendSliceValue|' command/{configtest,validate}.go gsed -i -e 's|consul/consul|agent/consul|' GNUmakefile gsed -i -e 's|\.\./test|../../test|' agent/consul/server_test.go # fix imports f=$(grep -rl 'github.com/hashicorp/consul/command/agent' * | grep '\.go') gsed -i -e 's|github.com/hashicorp/consul/command/agent|github.com/hashicorp/consul/agent|' $f goimports -w $f f=$(grep -rl 'github.com/hashicorp/consul/consul' * | grep '\.go') gsed -i -e 's|github.com/hashicorp/consul/consul|github.com/hashicorp/consul/agent/consul|' $f goimports -w $f goimports -w command/*.go main.go )
2017-06-09 22:28:28 +00:00
BaseCommand: BaseCommand{
2017-04-21 00:02:42 +00:00
UI: ui,
pkg refactor command/agent/* -> agent/* command/consul/* -> agent/consul/* command/agent/command{,_test}.go -> command/agent{,_test}.go command/base/command.go -> command/base.go command/base/* -> command/* commands.go -> command/commands.go The script which did the refactor is: ( cd $GOPATH/src/github.com/hashicorp/consul git mv command/agent/command.go command/agent.go git mv command/agent/command_test.go command/agent_test.go git mv command/agent/flag_slice_value{,_test}.go command/ git mv command/agent . git mv command/base/command.go command/base.go git mv command/base/config_util{,_test}.go command/ git mv commands.go command/ git mv consul agent rmdir command/base/ gsed -i -e 's|package agent|package command|' command/agent{,_test}.go gsed -i -e 's|package agent|package command|' command/flag_slice_value{,_test}.go gsed -i -e 's|package base|package command|' command/base.go command/config_util{,_test}.go gsed -i -e 's|package main|package command|' command/commands.go gsed -i -e 's|base.Command|BaseCommand|' command/commands.go gsed -i -e 's|agent.Command|AgentCommand|' command/commands.go gsed -i -e 's|\tCommand:|\tBaseCommand:|' command/commands.go gsed -i -e 's|base\.||' command/commands.go gsed -i -e 's|command\.||' command/commands.go gsed -i -e 's|command|c|' main.go gsed -i -e 's|range Commands|range command.Commands|' main.go gsed -i -e 's|Commands: Commands|Commands: command.Commands|' main.go gsed -i -e 's|base\.BoolValue|BoolValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.DurationValue|DurationValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.StringValue|StringValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.UintValue|UintValue|' command/operator_autopilot_set.go gsed -i -e 's|\bCommand\b|BaseCommand|' command/base.go gsed -i -e 's|BaseCommand Options|Command Options|' command/base.go gsed -i -e 's|base.Command|BaseCommand|' command/*.go gsed -i -e 's|c\.Command|c.BaseCommand|g' command/*.go gsed -i -e 's|\tCommand:|\tBaseCommand:|' command/*_test.go gsed -i -e 's|base\.||' command/*_test.go gsed -i -e 's|\bCommand\b|AgentCommand|' command/agent{,_test}.go gsed -i -e 's|cmd.AgentCommand|cmd.BaseCommand|' command/agent.go gsed -i -e 's|cli.AgentCommand = new(Command)|cli.Command = new(AgentCommand)|' command/agent_test.go gsed -i -e 's|exec.AgentCommand|exec.Command|' command/agent_test.go gsed -i -e 's|exec.BaseCommand|exec.Command|' command/agent_test.go gsed -i -e 's|NewTestAgent|agent.NewTestAgent|' command/agent_test.go gsed -i -e 's|= TestConfig|= agent.TestConfig|' command/agent_test.go gsed -i -e 's|: RetryJoin|: agent.RetryJoin|' command/agent_test.go gsed -i -e 's|\.\./\.\./|../|' command/config_util_test.go gsed -i -e 's|\bverifyUniqueListeners|VerifyUniqueListeners|' agent/config{,_test}.go command/agent.go gsed -i -e 's|\bserfLANKeyring\b|SerfLANKeyring|g' agent/{agent,keyring,testagent}.go command/agent.go gsed -i -e 's|\bserfWANKeyring\b|SerfWANKeyring|g' agent/{agent,keyring,testagent}.go command/agent.go gsed -i -e 's|\bNewAgent\b|agent.New|g' command/agent{,_test}.go gsed -i -e 's|\bNewAgent|New|' agent/{acl_test,agent,testagent}.go gsed -i -e 's|\bAgent\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bBool\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bDefaultConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bDevConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bMergeConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bReadConfigPaths\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bParseMetaPair\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bSerfLANKeyring\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bSerfWANKeyring\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|circonus\.agent|circonus|g' command/agent{,_test}.go gsed -i -e 's|logger\.agent|logger|g' command/agent{,_test}.go gsed -i -e 's|metrics\.agent|metrics|g' command/agent{,_test}.go gsed -i -e 's|// agent.Agent|// agent|' command/agent{,_test}.go gsed -i -e 's|a\.agent\.Config|a.Config|' command/agent{,_test}.go gsed -i -e 's|agent\.AppendSliceValue|AppendSliceValue|' command/{configtest,validate}.go gsed -i -e 's|consul/consul|agent/consul|' GNUmakefile gsed -i -e 's|\.\./test|../../test|' agent/consul/server_test.go # fix imports f=$(grep -rl 'github.com/hashicorp/consul/command/agent' * | grep '\.go') gsed -i -e 's|github.com/hashicorp/consul/command/agent|github.com/hashicorp/consul/agent|' $f goimports -w $f f=$(grep -rl 'github.com/hashicorp/consul/consul' * | grep '\.go') gsed -i -e 's|github.com/hashicorp/consul/consul|github.com/hashicorp/consul/agent/consul|' $f goimports -w $f goimports -w command/*.go main.go )
2017-06-09 22:28:28 +00:00
Flags: FlagSetHTTP,
},
}
}
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
func TestSnapshotRestoreCommand_implements(t *testing.T) {
2017-05-22 18:18:53 +00:00
t.Parallel()
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
var _ cli.Command = &SnapshotRestoreCommand{}
}
func TestSnapshotRestoreCommand_noTabs(t *testing.T) {
2017-05-22 18:18:53 +00:00
t.Parallel()
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
assertNoTabs(t, new(SnapshotRestoreCommand))
}
func TestSnapshotRestoreCommand_Validation(t *testing.T) {
2017-05-22 18:18:53 +00:00
t.Parallel()
ui, c := testSnapshotRestoreCommand(t)
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
cases := map[string]struct {
args []string
output string
}{
"no file": {
[]string{},
"Missing FILE argument",
},
"extra args": {
[]string{"foo", "bar", "baz"},
"Too many arguments",
},
}
for name, tc := range cases {
// Ensure our buffer is always clear
if ui.ErrorWriter != nil {
ui.ErrorWriter.Reset()
}
if ui.OutputWriter != nil {
ui.OutputWriter.Reset()
}
code := c.Run(tc.args)
if code == 0 {
t.Errorf("%s: expected non-zero exit", name)
}
output := ui.ErrorWriter.String()
if !strings.Contains(output, tc.output) {
t.Errorf("%s: expected %q to contain %q", name, output, tc.output)
}
}
}
func TestSnapshotRestoreCommand_Run(t *testing.T) {
2017-05-22 18:18:53 +00:00
t.Parallel()
a := agent.NewTestAgent(t.Name(), nil)
defer a.Shutdown()
client := a.Client()
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
ui, c := testSnapshotRestoreCommand(t)
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
dir := testutil.TempDir(t, "snapshot")
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
defer os.RemoveAll(dir)
file := path.Join(dir, "backup.tgz")
args := []string{
"-http-addr=" + a.HTTPAddr(),
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
file,
}
f, err := os.Create(file)
if err != nil {
t.Fatalf("err: %v", err)
}
snap, _, err := client.Snapshot().Save(nil)
if err != nil {
f.Close()
t.Fatalf("err: %v", err)
}
if _, err := io.Copy(f, snap); err != nil {
f.Close()
t.Fatalf("err: %v", err)
}
if err := f.Close(); err != nil {
t.Fatalf("err: %v", err)
}
code := c.Run(args)
if code != 0 {
t.Fatalf("bad: %d. %#v", code, ui.ErrorWriter.String())
}
}