The following components are required to run Consul-Terraform-Sync:
* A Terraform Provider
* A Terraform Module
* A Consul cluster running outside of the consul-terraform-sync daemon
Practitioners can add support for their network infrastructure through Terraform providers. Once network infrastructure support exists, practitioners can add network integrations in the form of Terraform modules.
The following guidance is for running Consul-Terraform-Sync using the Terraform driver. The Terraform Cloud driver<EnterpriseAlert inline />has [additional prerequisites](/docs/nia/network-drivers/terraform-cloud#setting-up-terraform-cloud-driver).
Below are several steps towards a minimum Consul setup required for running Consul-Terraform-Sync.
### Install Consul
Consul-Terraform-Sync is a daemon that runs alongside Consul, similar to other Consul ecosystem tools like Consul Template. Consul-Terraform-Sync is not included with the Consul binary and needs to be installed separately.
To install a local Consul agent, refer to the [Getting Started: Install Consul Tutorial](https://learn.hashicorp.com/tutorials/consul/get-started-install).
The Consul agent must be running in order to dynamically update network devices. To run the local Consul agent, you can run Consul in development mode which can be started with `consul agent -dev` for simplicity. For more details on running Consul agent, refer to the [Getting Started: Run the Consul Agent Tutorial](https://learn.hashicorp.com/tutorials/consul/get-started-agent?in=consul/getting-started).
When running a Consul agent with Consul-Terraform-Sync in production, we suggest to keep a few considerations in mind. Consul-Terraform-Sync uses [blocking queries](/api/features/blocking) to monitor task dependencies, like changes to registered services. This results in multiple long running TCP connections between Consul-Terraform-Sync and the agent to poll changes for each dependency. Monitoring a high number of services may quickly hit the default Consul agent connection limits.
There are 2 ways to fix this issue. The first and recommended fix is to use HTTP/2 (requires HTTPS) to communicate between Consul-Terraform-Sync and the Consul agent. When using HTTP/2 only a single connection is made and reused for all communications. See the [Consul Configuration section](/docs/nia/configuration#consul) for more. The other option is to configure [`limits.http_max_conns_per_client`](/docs/agent/options#http_max_conns_per_client) for the agent to a reasonable value proportional to the number of services monitored by Consul-Terraform-Sync.
Consul-Terraform-Sync monitors Consul catalog for service changes which lead to downstream changes to your network devices. Without services, your Consul-Terraform-Sync daemon will be operational but idle. You can register services with your Consul agent either by loading a service definition or by HTTP API request.
If you are running Consul in development mode, below is an example of registering a service by HTTP API request:
```shell-session
$ echo '{
"ID": "web",
"Name": "web",
"Address": "10.10.10.10",
"Port": 8000
}' > payload.json
$ curl --request PUT --data @payload.json http://localhost:8500/v1/agent/service/register
The above example registers a service named "web" with your Consul agent. This represents a non-existent web service running at 10.10.10.10:8000. Your web service is now available for Consul-Terraform-Sync to consume. In Consul-Terraform-Sync, you can optionally configure the web service with a [service block](/docs/nia/configuration#service) if it has any non-default values. You can also have Consul-Terraform-Sync monitor the web service to execute a task and update network device(s) by configuring "web" in [`task.services`](/docs/nia/configuration#services) of a task block.
For more details on registering a service by loading a service definition, refer to the [Getting Started: Register a Service with Consul Service Discovery Tutorial](https://learn.hashicorp.com/tutorials/consul/get-started-service-discovery?in=consul/getting-started).
### Run a Cluster
The previous steps of installing and running a single Consul agent then registering a single service is sufficient to meaningfully start running Consul-Terraform-Sync.
If you would like to run a Consul cluster rather than a single agent, refer to [Getting Started: Create a Local Consul Datacenter](https://learn.hashicorp.com/tutorials/consul/get-started-create-datacenter?in=consul/getting-started). This will walk you through the steps of running multiple Consul agents and then joining them together into a cluster.
## Network Infrastructure (using a Terraform Provider)
Consul-Terraform-Sync integrations for the Terraform driver utilizes Terraform providers as plugins to interface with specific network infrastructure platforms. The Terraform driver of Consul-Terraform-Sync inherits the expansive collection of Terraform providers to integrate with, and with release of [Terraform 0.13](https://www.hashicorp.com/blog/announcing-hashicorp-terraform-0-13/), this extends to include providers written by the community too by using [provider source](https://www.hashicorp.com/blog/adding-provider-source-to-hashicorp-terraform/).
To find providers for the infrastructure platforms you use, browse the providers section of the [Terraform Registry](https://registry.terraform.io/browse/providers).
### How to Create a Provider
If there is no existing Terraform provider, a new Terraform provider can be [created](https://learn.hashicorp.com/tutorials/terraform/provider-setup) and [published](https://www.terraform.io/docs/registry/providers/publishing.html). The provider can then be used within a network integration task by authoring a compatible Terraform module.
The Terraform module for a task in Consul-Terraform-Sync is the core component of the integration. It declares which resources and how your infrastructure is dynamically updated. The module along with how it is configured within a task determines the condition under which your infrastructure is updated.
Working with a Terraform provider, you can write an integration task for Consul-Terraform-Sync by [creating a Terraform module](/docs/nia/terraform-modules) that is compatible with the Terraform driver or use a module built by partners below.
Continue to the next page to [get started with configuring Consul-Terraform-Sync and how to use Terraform providers and modules for tasks.](/docs/nia/installation/configure)
- Dynamic Load Balancing with Group Member Updates: [Terraform Registry](https://registry.terraform.io/modules/a10networks/service-group-sync-nia/thunder/latest) / [GitHub](https://github.com/a10networks/terraform-thunder-service-group-sync-nia)
- Scale Up and Scale Down Pool and Pool Members (Servers): [GitHub](https://github.com/vmware/terraform-provider-avi/tree/20.1.5/modules/nia/pool)
#### AWS Application Load Balancer (ALB)
- Create Listener Rule and Target Group for an AWS ALB, Forward Traffic to Consul Ingress Gateway: [Terraform Registry](https://registry.terraform.io/modules/aws-quickstart/cts-alb_listener-nia/hashicorp/latest) / [GitHub](https://github.com/aws-quickstart/terraform-hashicorp-cts-alb_listener-nia)
- Create, Update and Delete Service Groups in Citrix ADC: [Terraform Registry](https://registry.terraform.io/modules/citrix/servicegroup-consul-sync-nia/citrixadc/latest) / [GitHub](https://github.com/citrix/terraform-citrixadc-servicegroup-consul-sync-nia)
- Dynamic Load Balancing with Pool Member Updates: [Terraform Registry](https://registry.terraform.io/modules/f5devcentral/app-consul-sync-nia/bigip/latest) / [GitHub](https://github.com/f5devcentral/terraform-bigip-app-consul-sync-nia)
- Create, Delete and Update DNS Records and Zones: [Terraform Registry](https://registry.terraform.io/modules/ns1-terraform/record-sync-nia/ns1/latest) / [GitHub](https://github.com/ns1-terraform/terraform-ns1-record-sync-nia)
- Dynamic Address Group (DAG) Tags: [Terraform Registry](https://registry.terraform.io/modules/PaloAltoNetworks/dag-nia/panos/latest) / [GitHub](https://github.com/PaloAltoNetworks/terraform-panos-dag-nia)
- Address Group and Dynamic Address Group (DAG) Tags: [Terraform Registry](https://registry.terraform.io/modules/PaloAltoNetworks/ag-dag-nia/panos/latest) / [GitHub](https://github.com/PaloAltoNetworks/terraform-panos-ag-dag-nia)
