open-consul/website/source/docs/connect/configuration.html.md

156 lines
7.2 KiB
Markdown
Raw Normal View History

---
layout: "docs"
page_title: "Connect - Configuration"
sidebar_current: "docs-connect-config"
description: |-
A Connect-aware proxy enables unmodified applications to use Connect. A per-service proxy sidecar transparently handles inbound and outbound service connections, automatically wrapping and verifying TLS connections.
---
# Connect Configuration
There are many configuration options exposed for Connect. The only option
that must be set is the "enabled" option on Consul Servers to enable Connect.
All other configurations are optional and have reasonable defaults.
## Enable Connect on the Cluster
The first step to use Connect is to enable Connect for your Consul
cluster. By default, Connect is disabled. Enabling Connect requires changing
the configuration of only your Consul _servers_ (not client agents). To enable
Connect, add the following to a new or existing
[server configuration file](/docs/agent/options.html). In HCL:
```hcl
connect {
enabled = true
}
```
This will enable Connect and configure your Consul cluster to use the
built-in certificate authority for creating and managing certificates.
You may also configure Consul to use an external
[certificate management system](/docs/connect/ca.html), such as
[Vault](https://vaultproject.io).
No agent-wide configuration is necessary for non-server agents. Services
and proxies may always register with Connect settings, but they will fail to
retrieve or verify any TLS certificates. This causes all Connect-based
connection attempts to fail until Connect is enabled on the server agents.
-> **Note:** Connect is enabled by default when running Consul in
dev mode with `consul agent -dev`.
2018-06-22 23:38:28 +00:00
~> **Security note:** Enabling Connect is enough to try the feature but doesn't
automatically ensure complete security. Please read the [Connect production
guide](/docs/guides/connect-production.html) to understand the additional steps
needed for a secure deployment.
## Built-In Proxy Options
2018-06-22 23:38:28 +00:00
This is a complete example of all the configuration options available for the
built-in proxy. Note that only the `service.connect.proxy.config` map is being
described here, the rest of the service definition is shown for context and is
[described elsewhere](/docs/connect/proxies.html#managed-proxies).
```javascript
{
"service": {
"name": "web",
"port": 8080,
"connect": {
"proxy": {
"config": {
"bind_address": "0.0.0.0",
"bind_port": 20000,
"tcp_check_address": "192.168.0.1",
"disable_tcp_check": false,
"local_service_address": "127.0.0.1:1234",
"local_connect_timeout_ms": 1000,
"handshake_timeout_ms": 10000,
"upstreams": [
{
"destination_type": "service",
"destination_name": "redis",
"destination_datacenter": "dc1",
"local_bind_address": "127.0.0.1",
"local_bind_port": 1234,
"connect_timeout_ms": 10000
},
]
}
}
}
}
}
```
#### Configuration Key Reference
All fields are optional with a sane default.
* <a name="bind_address"></a><a href="#bind_address">`bind_address`</a> -
The address the proxy will bind it's _public_ mTLS listener to. It
defaults to the same address the agent binds to.
* <a name="bind_port"></a><a href="#bind_port">`bind_port`</a> - The
port the proxy will bind it's _public_ mTLS listener to. If not provided, the
agent will attempt to assign one from its [configured proxy port
range](/docs/agent/options.html#proxy_min_port) if available. By default the
range is [20000, 20255] and the port is selected at random from that range.
* <a name="tcp_check_address"></a><a
href="#tcp_check_address">`tcp_check_address`</a> - The address the agent will
run a [TCP health check](/docs/agent/checks.html) against. By default this is
the same as the proxy's [bind address](#bind_address) except if the
bind_address is `0.0.0.0` or `[::]` in which case this defaults to `127.0.0.1`
2018-07-12 13:36:52 +00:00
and assumes the agent can dial the proxy over loopback. For more complex
configurations where agent and proxy communicate over a bridge for example,
this configuration can be used to specify a different _address_ (but not port)
for the agent to use for health checks if it can't talk to the proxy over
localhost or it's publicly advertised port. The check always uses the same
port that the proxy is bound to.
* <a name="disable_tcp_check"></a><a
href="#disable_tcp_check">`disable_tcp_check`</a> - If true, this disables a
TCP check being setup for the proxy. Default is false.
2018-06-22 23:38:28 +00:00
* <a name="local_service_address"></a><a href="#local_service_address">`local_service_address`</a> - The
`[address]:port` that the proxy should use to connect to the local application
instance. By default it assumes `127.0.0.1` as the address and takes the port
from the service definition's `port` field. Note that allowing the application
to listen on any non-loopback address may expose it externally and bypass
Connect's access enforcement. It may be useful though to allow non-standard
loopback addresses or where an alternative known-private IP is available for
example when using internal networking between containers.
* <a name="local_connect_timeout_ms"></a><a href="#local_connect_timeout_ms">`local_connect_timeout_ms`</a> - The number
of milliseconds the proxy will wait to establish a connection to the _local
application_ before giving up. Defaults to `1000` or 1 second.
* <a name="handshake_timeout_ms"></a><a href="#handshake_timeout_ms">`handshake_timeout_ms`</a> - The
number of milliseconds the proxy will wait for _incoming_ mTLS connections to
complete the TLS handshake. Defaults to `10000` or 10 seconds.
* <a name="upstreams"></a><a href="#upstreams">`upstreams`</a> - An array of
upstream definitions for remote services that the proxied
application needs to make outgoing connections to. Each definition has the
following fields:
* <a name="destination_name"></a><a href="#destination_name">`destination_name`</a> -
[required] The name of the service or prepared query to route connect to.
* <a name="local_bind_port"></a><a href="#local_bind_port">`local_bind_port`</a> -
[required] The port to bind a local listener to for the application to
make outbound connections to this upstream.
* <a name="local_bind_address"></a><a href="#local_bind_address">`local_bind_address`</a> -
The address to bind a local listener to for the application to make
outbound connections to this upstream.
* <a name="destination_type"></a><a href="#destination_type">`destination_type`</a> -
Either `service` or `upstream`. The type of discovery query to use to find
an instance to connect to. Defaults to `service`.
* <a name="destination_datacenter"></a><a href="#destination_datacenter">`destination_datacenter`</a> -
The datacenter to issue the discovery query too. Defaults to the local datacenter.
* <a name="connect_timeout_ms"></a><a href="#connect_timeout_ms">`connect_timeout_ms`</a> -
The number of milliseconds the proxy will wait to establish a connection to
and complete TLS handshake with the _remote_ application or proxy. Defaults
to `10000` or 10 seconds.