luxolus
/
open-consul
2
0
Fork 0
Code Issues 1 Pull Requests Packages Releases Wiki Activity
open-consul/agent/xds/testdata/clusters/connect-proxy-with-chain-an...

148 lines
7.9 KiB
Plaintext
Raw Normal View History

connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
{
"versionInfo": "00000001",
"resources": [
{
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658) - Also add support for envoy 1.17.0
2021-02-26 22:23:15 +00:00
"@type": "type.googleapis.com/envoy.config.cluster.v3.Cluster",
xds: improve how envoy metrics are emitted (#6312) Since generated envoy clusters all are named using (mostly) SNI syntax we can have envoy read the various fields out of that structure and emit it as stats labels to the various telemetry backends. I changed the delimiter for the 'customization hash' from ':' to '~' because ':' is always reencoded by envoy as '_' when generating metrics keys.
2019-08-16 14:30:17 +00:00
"name": "a236e964~db.default.dc1.internal.11111111-2222-3333-4444-555555555555.consul",
"altStatName": "a236e964~db.default.dc1.internal.11111111-2222-3333-4444-555555555555.consul",
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
"type": "EDS",
"edsClusterConfig": {
"edsConfig": {
"ads": {
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658) - Also add support for envoy 1.17.0
2021-02-26 22:23:15 +00:00
},
"resourceApiVersion": "V3"
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
}
},
"connectTimeout": "66s",
Allow configuration of upstream connection limits in Envoy (#6829) * Adds 'limits' field to the upstream configuration of a connect proxy This allows a user to configure the envoy connect proxy with 'max_connections', 'max_queued_requests', and 'max_concurrent_requests'. These values are defined in the local proxy on a per-service instance basis and should thus NOT be thought of as a global-level or even service-level value.
2019-12-03 20:13:33 +00:00
"circuitBreakers": {
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
},
"http2ProtocolOptions": {
},
"outlierDetection": {
},
"commonLbConfig": {
"healthyPanicThreshold": {
}
xds: remove deprecated usages of xDS (#9602) Note that this does NOT upgrade to xDS v3. That will come in a future PR. Additionally: - Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated. - Shuffled some agent/xds imports in advance of a later xDS v3 upgrade. - Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR. Fixes #8425
2021-02-22 21:00:15 +00:00
},
"transportSocket": {
"name": "tls",
"typedConfig": {
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658) - Also add support for envoy 1.17.0
2021-02-26 22:23:15 +00:00
"@type": "type.googleapis.com/envoy.extensions.transport_sockets.tls.v3.UpstreamTlsContext",
xds: remove deprecated usages of xDS (#9602) Note that this does NOT upgrade to xDS v3. That will come in a future PR. Additionally: - Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated. - Shuffled some agent/xds imports in advance of a later xDS v3 upgrade. - Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR. Fixes #8425
2021-02-22 21:00:15 +00:00
"commonTlsContext": {
"tlsParams": {
},
"tlsCertificates": [
{
"certificateChain": {
"inlineString": "-----BEGIN CERTIFICATE-----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\npY0heYeK9A6iOLrzqxSerkXXQyj5e9bE4VgUnxgPU6g=\n-----END CERTIFICATE-----\n"
},
"privateKey": {
"inlineString": "-----BEGIN EC PRIVATE KEY-----\nMHcCAQEEIMoTkpRggp3fqZzFKh82yS4LjtJI+XY+qX/7DefHFrtdoAoGCCqGSM49\nAwEHoUQDQgAEADPv1RHVNRfa2VKRAB16b6rZnEt7tuhaxCFpQXPj7M2omb0B9Fav\nq5E0ivpNtv1QnFhxtPd7d5k4e+T7SkW1TQ==\n-----END EC PRIVATE KEY-----\n"
}
}
],
"validationContext": {
"trustedCa": {
"inlineString": "-----BEGIN CERTIFICATE-----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\noR5f6Ku+cig2Il8T8LJujOp2/2A72QcHZA57B13y+8o=\n-----END CERTIFICATE-----\n"
Update golden files to account for SAN validation
2021-06-29 02:02:05 +00:00
},
"matchSubjectAltNames": [
{
"exact": "spiffe://11111111-2222-3333-4444-555555555555.consul/ns/default/dc/dc1/svc/db"
}
]
xds: remove deprecated usages of xDS (#9602) Note that this does NOT upgrade to xDS v3. That will come in a future PR. Additionally: - Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated. - Shuffled some agent/xds imports in advance of a later xDS v3 upgrade. - Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR. Fixes #8425
2021-02-22 21:00:15 +00:00
}
},
"sni": "db.default.dc1.internal.11111111-2222-3333-4444-555555555555.consul"
}
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
}
},
{
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658) - Also add support for envoy 1.17.0
2021-02-26 22:23:15 +00:00
"@type": "type.googleapis.com/envoy.config.cluster.v3.Cluster",
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
"name": "geo-cache.default.dc1.query.11111111-2222-3333-4444-555555555555.consul",
"type": "EDS",
"edsClusterConfig": {
"edsConfig": {
"ads": {
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658) - Also add support for envoy 1.17.0
2021-02-26 22:23:15 +00:00
},
"resourceApiVersion": "V3"
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
}
},
"connectTimeout": "5s",
Allow configuration of upstream connection limits in Envoy (#6829) * Adds 'limits' field to the upstream configuration of a connect proxy This allows a user to configure the envoy connect proxy with 'max_connections', 'max_queued_requests', and 'max_concurrent_requests'. These values are defined in the local proxy on a per-service instance basis and should thus NOT be thought of as a global-level or even service-level value.
2019-12-03 20:13:33 +00:00
"circuitBreakers": {
},
xds: remove deprecated usages of xDS (#9602) Note that this does NOT upgrade to xDS v3. That will come in a future PR. Additionally: - Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated. - Shuffled some agent/xds imports in advance of a later xDS v3 upgrade. - Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR. Fixes #8425
2021-02-22 21:00:15 +00:00
"outlierDetection": {
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
},
xds: remove deprecated usages of xDS (#9602) Note that this does NOT upgrade to xDS v3. That will come in a future PR. Additionally: - Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated. - Shuffled some agent/xds imports in advance of a later xDS v3 upgrade. - Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR. Fixes #8425
2021-02-22 21:00:15 +00:00
"transportSocket": {
"name": "tls",
"typedConfig": {
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658) - Also add support for envoy 1.17.0
2021-02-26 22:23:15 +00:00
"@type": "type.googleapis.com/envoy.extensions.transport_sockets.tls.v3.UpstreamTlsContext",
xds: remove deprecated usages of xDS (#9602) Note that this does NOT upgrade to xDS v3. That will come in a future PR. Additionally: - Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated. - Shuffled some agent/xds imports in advance of a later xDS v3 upgrade. - Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR. Fixes #8425
2021-02-22 21:00:15 +00:00
"commonTlsContext": {
"tlsParams": {
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
xds: remove deprecated usages of xDS (#9602) Note that this does NOT upgrade to xDS v3. That will come in a future PR. Additionally: - Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated. - Shuffled some agent/xds imports in advance of a later xDS v3 upgrade. - Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR. Fixes #8425
2021-02-22 21:00:15 +00:00
},
"tlsCertificates": [
{
"certificateChain": {
"inlineString": "-----BEGIN CERTIFICATE-----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\npY0heYeK9A6iOLrzqxSerkXXQyj5e9bE4VgUnxgPU6g=\n-----END CERTIFICATE-----\n"
},
"privateKey": {
"inlineString": "-----BEGIN EC PRIVATE KEY-----\nMHcCAQEEIMoTkpRggp3fqZzFKh82yS4LjtJI+XY+qX/7DefHFrtdoAoGCCqGSM49\nAwEHoUQDQgAEADPv1RHVNRfa2VKRAB16b6rZnEt7tuhaxCFpQXPj7M2omb0B9Fav\nq5E0ivpNtv1QnFhxtPd7d5k4e+T7SkW1TQ==\n-----END EC PRIVATE KEY-----\n"
}
}
],
"validationContext": {
"trustedCa": {
"inlineString": "-----BEGIN CERTIFICATE-----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\noR5f6Ku+cig2Il8T8LJujOp2/2A72QcHZA57B13y+8o=\n-----END CERTIFICATE-----\n"
Update golden files to account for SAN validation
2021-06-29 02:02:05 +00:00
},
"matchSubjectAltNames": [
{
Update prepared query cluster SAN validation Previously SAN validation for prepared queries was broken because we validated against the name, namespace, and datacenter for prepared queries. However, prepared queries can target: - Services with a name that isn't their own - Services in multiple datacenters This means that the SpiffeID to validate needs to be based on the prepared query endpoints, and not the prepared query's upstream definition. This commit updates prepared query clusters to account for that.
2021-08-19 00:06:41 +00:00
"exact": "spiffe://11111111-2222-3333-4444-555555555555.consul/ns/default/dc/dc1/svc/geo-cache-target"
},
{
"exact": "spiffe://11111111-2222-3333-4444-555555555555.consul/ns/default/dc/dc2/svc/geo-cache-target"
Update golden files to account for SAN validation
2021-06-29 02:02:05 +00:00
}
]
xds: remove deprecated usages of xDS (#9602) Note that this does NOT upgrade to xDS v3. That will come in a future PR. Additionally: - Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated. - Shuffled some agent/xds imports in advance of a later xDS v3 upgrade. - Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR. Fixes #8425
2021-02-22 21:00:15 +00:00
}
},
"sni": "geo-cache.default.dc1.query.11111111-2222-3333-4444-555555555555.consul"
}
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
}
},
{
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658) - Also add support for envoy 1.17.0
2021-02-26 22:23:15 +00:00
"@type": "type.googleapis.com/envoy.config.cluster.v3.Cluster",
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
"name": "local_app",
"type": "STATIC",
"connectTimeout": "5s",
"loadAssignment": {
"clusterName": "local_app",
"endpoints": [
{
"lbEndpoints": [
{
"endpoint": {
"address": {
"socketAddress": {
"address": "127.0.0.1",
"portValue": 8080
}
}
}
}
]
}
]
}
}
],
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658) - Also add support for envoy 1.17.0
2021-02-26 22:23:15 +00:00
"typeUrl": "type.googleapis.com/envoy.config.cluster.v3.Cluster",
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
"nonce": "00000001"
}