open-consul/ui-v2/tests/unit/utils/routing/wildcard-test.js

26 lines
652 B
JavaScript
Raw Normal View History

UI: [BUGFIX] Decode/encode urls (#5206) In https://github.com/hashicorp/consul/commit/858b05fc3127d3d20d9554e932353d767c7b5fdc#diff-46ef88aa04507fb9b039344277531584 we removed encoding values in pathnames as we thought they were eventually being encoded by `ember`. It looks like this isn't the case. Turns out sometimes they are encoded sometimes they aren't. It's complicated. If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206. It's related to the difference between `dynamic` routes and `wildcard` routes. Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding. Where I mention 'conditionally' below, this is detection is what is used for the decision. We conditionally add url encoding to the `{{href-to}}` helper/addon. The reasoning here is, if we are asking for a 'href/url' then whatever we receive back should always be urlencoded. We've done this by reusing as much code from the original `ember-href-to` addon as possible, after this change every call to the `{{href-to}}` helper will be urlencoded. As all links using `{{href-to}}` are now properly urlencoded. We also need to decode them in the correct place 'on the other end', so.. We also override the default `Route.paramsFor` method to conditionally decode all params before passing them to the `Route.model` hook. Lastly (the revert), as we almost consistently use url params to construct API calls, we make sure we re-encode any slugs that have been passed in by the user/developer. The original API for the `createURL` function was to allow you to pass values that didn't need encoding, values that **did** need encoding, followed by query params (which again require url encoding) All in all this should make the entire ember app url encode/decode safe.
2019-01-23 13:46:59 +00:00
import wildcard from 'consul-ui/utils/routing/wildcard';
import { module, test } from 'qunit';
ui: UI Release Merge (ui-staging merge) (#6527) ## HTTPAdapter (#5637) ## Ember upgrade 2.18 > 3.12 (#6448) ### Proxies can no longer get away with not calling _super This means that we can't use create anymore to define dynamic methods. Therefore we dynamically make 2 extended Proxies on demand, and then create from those. Therefore we can call _super in the init method of the extended Proxies. ### We aren't allowed to reset a service anymore We never actually need to now anyway, this is a remnant of the refactor from browser based confirmations. We fix it as simply as possible here but will revisit and remove the old browser confirm functionality at a later date ### Revert classes to use ES5 style to workaround babel transp. probs Using a mixture of ES6 classes (and hence super) and arrow functions means that when babel transpiles the arrow functions down to ES5, a reference to this is moved before the call to super, hence causing a js error. Furthermore, we the testing environment no longer lets use use apply/call on the constructor. These errors only manifests during testing (only in the testing environment), the application itself runs fine with no problems without this change. Using ES5 style class definitions give us freedom to do all of the above without causing any errors, so we reverted these classes back to ES5 class definitions ### Skip test that seems to have changed due to a change in RSVP timing This test tests a usecase/area of the API that will probably never ever be used, it was more testing out the API. We've skipped the test for now as this doesn't affect the application itself, but left a note to come back here later to investigate further ### Remove enumerableContentDidChange Initial testing looks like we don't need to call this function anymore, the function no longer exists ### Rework Changeset.isSaving to take into account new ember APIs Setting/hanging a computedProperty of an instantiated object no longer works. Move to setting it on the prototype/class definition instead ### Change how we detect whether something requires listening New ember API's have changed how you can detect whether something is a computedProperty or not. It's not immediately clear if its even possible now. Therefore we change how we detect whether something should be listened to or not by just looking for presence of `addEventListener` ### Potentially temporary change of ci test scripts to ensure deps exist All our tooling scripts run through a Makefile (for people familiar with only using those), which then call yarn scripts which can be called independently (for people familar with only using yarn). The Makefile targets always check to make sure all the dependencies are installed before running anything that requires them (building, testing etc). The CI scripts/targets didn't follow this same route and called the yarn scripts directly (usually CI builds a cache of the dependencies first). For some reason this cache isn't doing what it usually does, and it looks as though, in CI, ember isn't installed. This commit makes the CI scripts consistently use the same method as all of the other tooling scripts (Makefile target > Install Deps if required > call yarn script). This should install the dependencies if for some reason the CI cache building doesn't complete/isn't successful. Potentially this commit may be reverted if, the root of the problem is elsewhere, although consistency is always good, so it might be a good idea to leave this commit as is even if we need to debug and fix things elsewhere. ### Make test-parallel consistent with the rest of the tooling scripts As we are here making changes for CI purposes (making test-ci consistent), we spotted that test-parallel is also inconsistent and also the README manual instructions won't work without `ember` installed globally. This commit makes everything consistent and changes the manual instructions to use the local ember instance that gets installed via yarn ### Re-wrangle catchable to fit with new ember 3.12 APIs In the upgrade from ember 3.8 > 3.12 the public interfaces for ComputedProperties have changed slightly. `meta` is no longer a public property of ComputedProperty but of a ComputedDecoratorImpl mixin instead. https://github.com/emberjs/ember.js/blob/7e4ba1096e3c2e3e0dde186d5ca52ff19cb8720a/packages/%40ember/-internals/metal/lib/computed.ts#L725 There seems to be no way, by just using publically available methods, to replicate this behaviour so that we can create our own 'ComputedProperty` factory via injecting the ComputedProperty class as we did previously. https://github.com/hashicorp/consul/blob/3f333bada181aaf6340523ca2268a28d1a7db214/ui-v2/app/utils/computed/factory.js#L1-L18 Instead we dynamically hang our `Catchable` `catch` method off the instantiated ComputedProperty. In doing it like this `ComputedProperty` has already has its `meta` method mixed in so we don't have to manually mix it in ourselves (which doesn't seem possible) This functionality is only used during our work in trying to ensure our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e. using the traditional Route.model hooks and ember-like Controller properties). Our ongoing/upcoming work on a componentized approach to data a.k.a `<DataSource />` means we will be able to remove the majority of the code involved here now that it seems to be under an amount of flux in ember. ### Build bindata_assetfs.go with new UI changes
2019-09-30 13:47:49 +00:00
module('Unit | Utility | routing/wildcard', function() {
test('it finds a * in a path', function(assert) {
const isWildcard = wildcard({
route: {
_options: {
path: 'i-m-a-wildcard*',
},
UI: [BUGFIX] Decode/encode urls (#5206) In https://github.com/hashicorp/consul/commit/858b05fc3127d3d20d9554e932353d767c7b5fdc#diff-46ef88aa04507fb9b039344277531584 we removed encoding values in pathnames as we thought they were eventually being encoded by `ember`. It looks like this isn't the case. Turns out sometimes they are encoded sometimes they aren't. It's complicated. If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206. It's related to the difference between `dynamic` routes and `wildcard` routes. Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding. Where I mention 'conditionally' below, this is detection is what is used for the decision. We conditionally add url encoding to the `{{href-to}}` helper/addon. The reasoning here is, if we are asking for a 'href/url' then whatever we receive back should always be urlencoded. We've done this by reusing as much code from the original `ember-href-to` addon as possible, after this change every call to the `{{href-to}}` helper will be urlencoded. As all links using `{{href-to}}` are now properly urlencoded. We also need to decode them in the correct place 'on the other end', so.. We also override the default `Route.paramsFor` method to conditionally decode all params before passing them to the `Route.model` hook. Lastly (the revert), as we almost consistently use url params to construct API calls, we make sure we re-encode any slugs that have been passed in by the user/developer. The original API for the `createURL` function was to allow you to pass values that didn't need encoding, values that **did** need encoding, followed by query params (which again require url encoding) All in all this should make the entire ember app url encode/decode safe.
2019-01-23 13:46:59 +00:00
},
ui: UI Release Merge (ui-staging merge) (#6527) ## HTTPAdapter (#5637) ## Ember upgrade 2.18 > 3.12 (#6448) ### Proxies can no longer get away with not calling _super This means that we can't use create anymore to define dynamic methods. Therefore we dynamically make 2 extended Proxies on demand, and then create from those. Therefore we can call _super in the init method of the extended Proxies. ### We aren't allowed to reset a service anymore We never actually need to now anyway, this is a remnant of the refactor from browser based confirmations. We fix it as simply as possible here but will revisit and remove the old browser confirm functionality at a later date ### Revert classes to use ES5 style to workaround babel transp. probs Using a mixture of ES6 classes (and hence super) and arrow functions means that when babel transpiles the arrow functions down to ES5, a reference to this is moved before the call to super, hence causing a js error. Furthermore, we the testing environment no longer lets use use apply/call on the constructor. These errors only manifests during testing (only in the testing environment), the application itself runs fine with no problems without this change. Using ES5 style class definitions give us freedom to do all of the above without causing any errors, so we reverted these classes back to ES5 class definitions ### Skip test that seems to have changed due to a change in RSVP timing This test tests a usecase/area of the API that will probably never ever be used, it was more testing out the API. We've skipped the test for now as this doesn't affect the application itself, but left a note to come back here later to investigate further ### Remove enumerableContentDidChange Initial testing looks like we don't need to call this function anymore, the function no longer exists ### Rework Changeset.isSaving to take into account new ember APIs Setting/hanging a computedProperty of an instantiated object no longer works. Move to setting it on the prototype/class definition instead ### Change how we detect whether something requires listening New ember API's have changed how you can detect whether something is a computedProperty or not. It's not immediately clear if its even possible now. Therefore we change how we detect whether something should be listened to or not by just looking for presence of `addEventListener` ### Potentially temporary change of ci test scripts to ensure deps exist All our tooling scripts run through a Makefile (for people familiar with only using those), which then call yarn scripts which can be called independently (for people familar with only using yarn). The Makefile targets always check to make sure all the dependencies are installed before running anything that requires them (building, testing etc). The CI scripts/targets didn't follow this same route and called the yarn scripts directly (usually CI builds a cache of the dependencies first). For some reason this cache isn't doing what it usually does, and it looks as though, in CI, ember isn't installed. This commit makes the CI scripts consistently use the same method as all of the other tooling scripts (Makefile target > Install Deps if required > call yarn script). This should install the dependencies if for some reason the CI cache building doesn't complete/isn't successful. Potentially this commit may be reverted if, the root of the problem is elsewhere, although consistency is always good, so it might be a good idea to leave this commit as is even if we need to debug and fix things elsewhere. ### Make test-parallel consistent with the rest of the tooling scripts As we are here making changes for CI purposes (making test-ci consistent), we spotted that test-parallel is also inconsistent and also the README manual instructions won't work without `ember` installed globally. This commit makes everything consistent and changes the manual instructions to use the local ember instance that gets installed via yarn ### Re-wrangle catchable to fit with new ember 3.12 APIs In the upgrade from ember 3.8 > 3.12 the public interfaces for ComputedProperties have changed slightly. `meta` is no longer a public property of ComputedProperty but of a ComputedDecoratorImpl mixin instead. https://github.com/emberjs/ember.js/blob/7e4ba1096e3c2e3e0dde186d5ca52ff19cb8720a/packages/%40ember/-internals/metal/lib/computed.ts#L725 There seems to be no way, by just using publically available methods, to replicate this behaviour so that we can create our own 'ComputedProperty` factory via injecting the ComputedProperty class as we did previously. https://github.com/hashicorp/consul/blob/3f333bada181aaf6340523ca2268a28d1a7db214/ui-v2/app/utils/computed/factory.js#L1-L18 Instead we dynamically hang our `Catchable` `catch` method off the instantiated ComputedProperty. In doing it like this `ComputedProperty` has already has its `meta` method mixed in so we don't have to manually mix it in ourselves (which doesn't seem possible) This functionality is only used during our work in trying to ensure our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e. using the traditional Route.model hooks and ember-like Controller properties). Our ongoing/upcoming work on a componentized approach to data a.k.a `<DataSource />` means we will be able to remove the majority of the code involved here now that it seems to be under an amount of flux in ember. ### Build bindata_assetfs.go with new UI changes
2019-09-30 13:47:49 +00:00
});
assert.ok(isWildcard('route'));
UI: [BUGFIX] Decode/encode urls (#5206) In https://github.com/hashicorp/consul/commit/858b05fc3127d3d20d9554e932353d767c7b5fdc#diff-46ef88aa04507fb9b039344277531584 we removed encoding values in pathnames as we thought they were eventually being encoded by `ember`. It looks like this isn't the case. Turns out sometimes they are encoded sometimes they aren't. It's complicated. If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206. It's related to the difference between `dynamic` routes and `wildcard` routes. Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding. Where I mention 'conditionally' below, this is detection is what is used for the decision. We conditionally add url encoding to the `{{href-to}}` helper/addon. The reasoning here is, if we are asking for a 'href/url' then whatever we receive back should always be urlencoded. We've done this by reusing as much code from the original `ember-href-to` addon as possible, after this change every call to the `{{href-to}}` helper will be urlencoded. As all links using `{{href-to}}` are now properly urlencoded. We also need to decode them in the correct place 'on the other end', so.. We also override the default `Route.paramsFor` method to conditionally decode all params before passing them to the `Route.model` hook. Lastly (the revert), as we almost consistently use url params to construct API calls, we make sure we re-encode any slugs that have been passed in by the user/developer. The original API for the `createURL` function was to allow you to pass values that didn't need encoding, values that **did** need encoding, followed by query params (which again require url encoding) All in all this should make the entire ember app url encode/decode safe.
2019-01-23 13:46:59 +00:00
});
ui: UI Release Merge (ui-staging merge) (#6527) ## HTTPAdapter (#5637) ## Ember upgrade 2.18 > 3.12 (#6448) ### Proxies can no longer get away with not calling _super This means that we can't use create anymore to define dynamic methods. Therefore we dynamically make 2 extended Proxies on demand, and then create from those. Therefore we can call _super in the init method of the extended Proxies. ### We aren't allowed to reset a service anymore We never actually need to now anyway, this is a remnant of the refactor from browser based confirmations. We fix it as simply as possible here but will revisit and remove the old browser confirm functionality at a later date ### Revert classes to use ES5 style to workaround babel transp. probs Using a mixture of ES6 classes (and hence super) and arrow functions means that when babel transpiles the arrow functions down to ES5, a reference to this is moved before the call to super, hence causing a js error. Furthermore, we the testing environment no longer lets use use apply/call on the constructor. These errors only manifests during testing (only in the testing environment), the application itself runs fine with no problems without this change. Using ES5 style class definitions give us freedom to do all of the above without causing any errors, so we reverted these classes back to ES5 class definitions ### Skip test that seems to have changed due to a change in RSVP timing This test tests a usecase/area of the API that will probably never ever be used, it was more testing out the API. We've skipped the test for now as this doesn't affect the application itself, but left a note to come back here later to investigate further ### Remove enumerableContentDidChange Initial testing looks like we don't need to call this function anymore, the function no longer exists ### Rework Changeset.isSaving to take into account new ember APIs Setting/hanging a computedProperty of an instantiated object no longer works. Move to setting it on the prototype/class definition instead ### Change how we detect whether something requires listening New ember API's have changed how you can detect whether something is a computedProperty or not. It's not immediately clear if its even possible now. Therefore we change how we detect whether something should be listened to or not by just looking for presence of `addEventListener` ### Potentially temporary change of ci test scripts to ensure deps exist All our tooling scripts run through a Makefile (for people familiar with only using those), which then call yarn scripts which can be called independently (for people familar with only using yarn). The Makefile targets always check to make sure all the dependencies are installed before running anything that requires them (building, testing etc). The CI scripts/targets didn't follow this same route and called the yarn scripts directly (usually CI builds a cache of the dependencies first). For some reason this cache isn't doing what it usually does, and it looks as though, in CI, ember isn't installed. This commit makes the CI scripts consistently use the same method as all of the other tooling scripts (Makefile target > Install Deps if required > call yarn script). This should install the dependencies if for some reason the CI cache building doesn't complete/isn't successful. Potentially this commit may be reverted if, the root of the problem is elsewhere, although consistency is always good, so it might be a good idea to leave this commit as is even if we need to debug and fix things elsewhere. ### Make test-parallel consistent with the rest of the tooling scripts As we are here making changes for CI purposes (making test-ci consistent), we spotted that test-parallel is also inconsistent and also the README manual instructions won't work without `ember` installed globally. This commit makes everything consistent and changes the manual instructions to use the local ember instance that gets installed via yarn ### Re-wrangle catchable to fit with new ember 3.12 APIs In the upgrade from ember 3.8 > 3.12 the public interfaces for ComputedProperties have changed slightly. `meta` is no longer a public property of ComputedProperty but of a ComputedDecoratorImpl mixin instead. https://github.com/emberjs/ember.js/blob/7e4ba1096e3c2e3e0dde186d5ca52ff19cb8720a/packages/%40ember/-internals/metal/lib/computed.ts#L725 There seems to be no way, by just using publically available methods, to replicate this behaviour so that we can create our own 'ComputedProperty` factory via injecting the ComputedProperty class as we did previously. https://github.com/hashicorp/consul/blob/3f333bada181aaf6340523ca2268a28d1a7db214/ui-v2/app/utils/computed/factory.js#L1-L18 Instead we dynamically hang our `Catchable` `catch` method off the instantiated ComputedProperty. In doing it like this `ComputedProperty` has already has its `meta` method mixed in so we don't have to manually mix it in ourselves (which doesn't seem possible) This functionality is only used during our work in trying to ensure our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e. using the traditional Route.model hooks and ember-like Controller properties). Our ongoing/upcoming work on a componentized approach to data a.k.a `<DataSource />` means we will be able to remove the majority of the code involved here now that it seems to be under an amount of flux in ember. ### Build bindata_assetfs.go with new UI changes
2019-09-30 13:47:49 +00:00
test("it returns false without throwing if it doesn't find route", function(assert) {
const isWildcard = wildcard({
route: {
_options: {
path: 'i-m-a-wildcard*',
},
UI: [BUGFIX] Decode/encode urls (#5206) In https://github.com/hashicorp/consul/commit/858b05fc3127d3d20d9554e932353d767c7b5fdc#diff-46ef88aa04507fb9b039344277531584 we removed encoding values in pathnames as we thought they were eventually being encoded by `ember`. It looks like this isn't the case. Turns out sometimes they are encoded sometimes they aren't. It's complicated. If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206. It's related to the difference between `dynamic` routes and `wildcard` routes. Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding. Where I mention 'conditionally' below, this is detection is what is used for the decision. We conditionally add url encoding to the `{{href-to}}` helper/addon. The reasoning here is, if we are asking for a 'href/url' then whatever we receive back should always be urlencoded. We've done this by reusing as much code from the original `ember-href-to` addon as possible, after this change every call to the `{{href-to}}` helper will be urlencoded. As all links using `{{href-to}}` are now properly urlencoded. We also need to decode them in the correct place 'on the other end', so.. We also override the default `Route.paramsFor` method to conditionally decode all params before passing them to the `Route.model` hook. Lastly (the revert), as we almost consistently use url params to construct API calls, we make sure we re-encode any slugs that have been passed in by the user/developer. The original API for the `createURL` function was to allow you to pass values that didn't need encoding, values that **did** need encoding, followed by query params (which again require url encoding) All in all this should make the entire ember app url encode/decode safe.
2019-01-23 13:46:59 +00:00
},
ui: UI Release Merge (ui-staging merge) (#6527) ## HTTPAdapter (#5637) ## Ember upgrade 2.18 > 3.12 (#6448) ### Proxies can no longer get away with not calling _super This means that we can't use create anymore to define dynamic methods. Therefore we dynamically make 2 extended Proxies on demand, and then create from those. Therefore we can call _super in the init method of the extended Proxies. ### We aren't allowed to reset a service anymore We never actually need to now anyway, this is a remnant of the refactor from browser based confirmations. We fix it as simply as possible here but will revisit and remove the old browser confirm functionality at a later date ### Revert classes to use ES5 style to workaround babel transp. probs Using a mixture of ES6 classes (and hence super) and arrow functions means that when babel transpiles the arrow functions down to ES5, a reference to this is moved before the call to super, hence causing a js error. Furthermore, we the testing environment no longer lets use use apply/call on the constructor. These errors only manifests during testing (only in the testing environment), the application itself runs fine with no problems without this change. Using ES5 style class definitions give us freedom to do all of the above without causing any errors, so we reverted these classes back to ES5 class definitions ### Skip test that seems to have changed due to a change in RSVP timing This test tests a usecase/area of the API that will probably never ever be used, it was more testing out the API. We've skipped the test for now as this doesn't affect the application itself, but left a note to come back here later to investigate further ### Remove enumerableContentDidChange Initial testing looks like we don't need to call this function anymore, the function no longer exists ### Rework Changeset.isSaving to take into account new ember APIs Setting/hanging a computedProperty of an instantiated object no longer works. Move to setting it on the prototype/class definition instead ### Change how we detect whether something requires listening New ember API's have changed how you can detect whether something is a computedProperty or not. It's not immediately clear if its even possible now. Therefore we change how we detect whether something should be listened to or not by just looking for presence of `addEventListener` ### Potentially temporary change of ci test scripts to ensure deps exist All our tooling scripts run through a Makefile (for people familiar with only using those), which then call yarn scripts which can be called independently (for people familar with only using yarn). The Makefile targets always check to make sure all the dependencies are installed before running anything that requires them (building, testing etc). The CI scripts/targets didn't follow this same route and called the yarn scripts directly (usually CI builds a cache of the dependencies first). For some reason this cache isn't doing what it usually does, and it looks as though, in CI, ember isn't installed. This commit makes the CI scripts consistently use the same method as all of the other tooling scripts (Makefile target > Install Deps if required > call yarn script). This should install the dependencies if for some reason the CI cache building doesn't complete/isn't successful. Potentially this commit may be reverted if, the root of the problem is elsewhere, although consistency is always good, so it might be a good idea to leave this commit as is even if we need to debug and fix things elsewhere. ### Make test-parallel consistent with the rest of the tooling scripts As we are here making changes for CI purposes (making test-ci consistent), we spotted that test-parallel is also inconsistent and also the README manual instructions won't work without `ember` installed globally. This commit makes everything consistent and changes the manual instructions to use the local ember instance that gets installed via yarn ### Re-wrangle catchable to fit with new ember 3.12 APIs In the upgrade from ember 3.8 > 3.12 the public interfaces for ComputedProperties have changed slightly. `meta` is no longer a public property of ComputedProperty but of a ComputedDecoratorImpl mixin instead. https://github.com/emberjs/ember.js/blob/7e4ba1096e3c2e3e0dde186d5ca52ff19cb8720a/packages/%40ember/-internals/metal/lib/computed.ts#L725 There seems to be no way, by just using publically available methods, to replicate this behaviour so that we can create our own 'ComputedProperty` factory via injecting the ComputedProperty class as we did previously. https://github.com/hashicorp/consul/blob/3f333bada181aaf6340523ca2268a28d1a7db214/ui-v2/app/utils/computed/factory.js#L1-L18 Instead we dynamically hang our `Catchable` `catch` method off the instantiated ComputedProperty. In doing it like this `ComputedProperty` has already has its `meta` method mixed in so we don't have to manually mix it in ourselves (which doesn't seem possible) This functionality is only used during our work in trying to ensure our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e. using the traditional Route.model hooks and ember-like Controller properties). Our ongoing/upcoming work on a componentized approach to data a.k.a `<DataSource />` means we will be able to remove the majority of the code involved here now that it seems to be under an amount of flux in ember. ### Build bindata_assetfs.go with new UI changes
2019-09-30 13:47:49 +00:00
});
assert.notOk(isWildcard('not-route'));
UI: [BUGFIX] Decode/encode urls (#5206) In https://github.com/hashicorp/consul/commit/858b05fc3127d3d20d9554e932353d767c7b5fdc#diff-46ef88aa04507fb9b039344277531584 we removed encoding values in pathnames as we thought they were eventually being encoded by `ember`. It looks like this isn't the case. Turns out sometimes they are encoded sometimes they aren't. It's complicated. If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206. It's related to the difference between `dynamic` routes and `wildcard` routes. Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding. Where I mention 'conditionally' below, this is detection is what is used for the decision. We conditionally add url encoding to the `{{href-to}}` helper/addon. The reasoning here is, if we are asking for a 'href/url' then whatever we receive back should always be urlencoded. We've done this by reusing as much code from the original `ember-href-to` addon as possible, after this change every call to the `{{href-to}}` helper will be urlencoded. As all links using `{{href-to}}` are now properly urlencoded. We also need to decode them in the correct place 'on the other end', so.. We also override the default `Route.paramsFor` method to conditionally decode all params before passing them to the `Route.model` hook. Lastly (the revert), as we almost consistently use url params to construct API calls, we make sure we re-encode any slugs that have been passed in by the user/developer. The original API for the `createURL` function was to allow you to pass values that didn't need encoding, values that **did** need encoding, followed by query params (which again require url encoding) All in all this should make the entire ember app url encode/decode safe.
2019-01-23 13:46:59 +00:00
});
});