open-consul/ui/packages/consul-ui/app/services/client/http.js

273 lines
8.9 KiB
JavaScript
Raw Normal View History

import Service, { inject as service } from '@ember/service';
import { get } from '@ember/object';
import { next } from '@ember/runloop';
import { CACHE_CONTROL, CONTENT_TYPE } from 'consul-ui/utils/http/headers';
ui: Adds Partitions to the HTTP layer (#10447) This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app. The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions. Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case. Notes: Added a PartitionAbility while we were there (not used as yet) Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP. We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different! We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet. All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
2021-09-15 17:09:55 +00:00
import {
HEADERS_TOKEN as CONSUL_TOKEN,
ui: Partitions Application Layer (#11017) * Add Partition to all our models * Add partitions into our serializers/fingerprinting * Make some amends to a few adapters ready for partitions * Amend blueprints to avoid linting error * Update all our repositories to include partitions, also Remove enabled/disable nspace repo and just use a nspace with conditionals * Ensure nspace and parition parameters always return '' no matter what * Ensure data-sink finds the model properly This will later be replaced by a @dataSink decorator but we are find kicking that can down the road a little more * Add all the new partition data layer * Add a way to set the title of the page from inside the route and make it accessibile via a route announcer * Make the Consul Route the default/basic one * Tweak nspace and partition abilities not to check the length * Thread partition through all the components that need it * Some ACL tweaks * Move the entire app to use partitions * Delete all the tests we no longer need * Update some Unit tests to use partition * Fix up KV title tests * Fix up a few more acceptance tests * Fixup and temporarily ignore some acceptance tests * Stop using ember-cli-page-objects fillable as it doesn't seem to work * Fix lint error * Remove old ACL related test * Add a tick after filling out forms * Fix token warning modal * Found some more places where we need a partition var * Fixup some more acceptance tests * Tokens still needs a repo service for CRUD * Remove acceptance tests we no longer need * Fixup and "FIXME ignore" a few tests * Remove an s * Disable blocking queries for KV to revert to previous release for now * Fixup adapter tests to follow async/function resolving interface * Fixup all the serializer integration tests * Fixup service/repo integration tests * Fixup deleting acceptance test * Fixup some ent tests * Make sure nspaces passes the dc through for when thats important * ...aaaand acceptance nspaces with the extra dc param
2021-09-15 18:50:11 +00:00
HEADERS_PARTITION as CONSUL_PARTITION,
ui: Adds Partitions to the HTTP layer (#10447) This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app. The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions. Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case. Notes: Added a PartitionAbility while we were there (not used as yet) Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP. We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different! We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet. All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
2021-09-15 17:09:55 +00:00
HEADERS_NAMESPACE as CONSUL_NAMESPACE,
HEADERS_DATACENTER as CONSUL_DATACENTER,
} from 'consul-ui/utils/http/consul';
import createURL from 'consul-ui/utils/http/create-url';
import createHeaders from 'consul-ui/utils/http/create-headers';
import createQueryParams from 'consul-ui/utils/http/create-query-params';
// reopen EventSources if a user changes tab
export const restartWhenAvailable = function(client) {
return function(e) {
// setup the aborted connection restarting
// this should happen here to avoid cache deletion
const status = get(e, 'errors.firstObject.status');
// TODO: Reconsider a proper custom HTTP code
// -1 is a UI only error code for 'user switched tab'
if (status === '-1') {
// Any '0' errors (abort) should possibly try again, depending upon the circumstances
// whenAvailable returns a Promise that resolves when the client is available
// again
return client.whenAvailable(e);
}
throw e;
};
};
ui: Adds Partitions to the HTTP layer (#10447) This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app. The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions. Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case. Notes: Added a PartitionAbility while we were there (not used as yet) Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP. We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different! We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet. All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
2021-09-15 17:09:55 +00:00
const QueryParams = {
stringify: createQueryParams(encodeURIComponent),
};
const parseHeaders = createHeaders();
const parseBody = function(strs, ...values) {
let body = {};
const doubleBreak = strs.reduce(function(prev, item, i) {
// Ensure each line has no whitespace either end, including empty lines
item = item
.split('\n')
.map(item => item.trim())
.join('\n');
if (item.indexOf('\n\n') !== -1) {
return i;
}
return prev;
}, -1);
if (doubleBreak !== -1) {
// This merges request bodies together, so you can specify multiple bodies
// in the request and it will merge them together.
// Turns out we never actually do this, so it might be worth removing as it complicates
// matters slightly as we assumed post bodies would be an object.
// This actually works as it just uses the value of the first object, if its an array
// it concats
body = values.splice(doubleBreak).reduce(function(prev, item, i) {
switch (true) {
case Array.isArray(item):
if (i === 0) {
prev = [];
}
return prev.concat(item);
case typeof item !== 'string':
return {
...prev,
...item,
};
default:
return item;
}
}, body);
}
return [body, ...values];
};
const CLIENT_HEADERS = [CACHE_CONTROL, 'X-Request-ID', 'X-Range', 'Refresh'];
export default class HttpService extends Service {
ui: Adds Partitions to the HTTP layer (#10447) This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app. The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions. Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case. Notes: Added a PartitionAbility while we were there (not used as yet) Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP. We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different! We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet. All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
2021-09-15 17:09:55 +00:00
@service('dom') dom;
@service('env') env;
@service('client/connections') connections;
@service('client/transports/xhr') transport;
@service('settings') settings;
init() {
super.init(...arguments);
this._listeners = this.dom.listeners();
ui: Adds Partitions to the HTTP layer (#10447) This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app. The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions. Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case. Notes: Added a PartitionAbility while we were there (not used as yet) Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP. We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different! We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet. All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
2021-09-15 17:09:55 +00:00
this.parseURL = createURL(encodeURIComponent, obj => QueryParams.stringify(this.sanitize(obj)));
}
sanitize(obj) {
if (!this.env.var('CONSUL_NSPACES_ENABLED')) {
delete obj.ns;
} else {
if (typeof obj.ns === 'undefined' || obj.ns === null || obj.ns === '') {
delete obj.ns;
}
}
if (!this.env.var('CONSUL_PARTITIONS_ENABLED')) {
delete obj.partition;
} else {
if (typeof obj.partition === 'undefined' || obj.partition === null || obj.partition === '') {
delete obj.partition;
}
}
return obj;
}
willDestroy() {
this._listeners.remove();
super.willDestroy(...arguments);
}
url() {
ui: Adds Partitions to the HTTP layer (#10447) This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app. The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions. Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case. Notes: Added a PartitionAbility while we were there (not used as yet) Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP. We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different! We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet. All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
2021-09-15 17:09:55 +00:00
return this.parseURL(...arguments);
}
body() {
ui: Adds Partitions to the HTTP layer (#10447) This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app. The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions. Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case. Notes: Added a PartitionAbility while we were there (not used as yet) Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP. We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different! We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet. All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
2021-09-15 17:09:55 +00:00
const res = parseBody(...arguments);
this.sanitize(res[0]);
return res;
}
requestParams(strs, ...values) {
// first go to the end and remove/parse the http body
const [body, ...urlVars] = this.body(...arguments);
// with whats left get the method off the front
const [method, ...urlParts] = this.url(strs, ...urlVars).split(' ');
// with whats left use the rest of the line for the url
// with whats left after the line, use for the headers
const [url, ...headerParts] = urlParts.join(' ').split('\n');
const params = {
url: url.trim(),
method: method.trim(),
headers: {
[CONTENT_TYPE]: 'application/json; charset=utf-8',
...parseHeaders(headerParts),
},
body: null,
data: body,
};
// Remove and save things that shouldn't be sent in the request
params.clientHeaders = CLIENT_HEADERS.reduce(function(prev, item) {
if (typeof params.headers[item] !== 'undefined') {
prev[item.toLowerCase()] = params.headers[item];
delete params.headers[item];
}
return prev;
}, {});
if (typeof body !== 'undefined') {
// Only read add HTTP body if we aren't GET
// Right now we do this to avoid having to put data in the templates
// for write-like actions
// potentially we should change things so you _have_ to do that
// as doing it this way is a little magical
if (params.method !== 'GET') {
if (params.headers[CONTENT_TYPE].indexOf('json') !== -1) {
params.body = JSON.stringify(params.data);
} else {
if (
(typeof params.data === 'string' && params.data.length > 0) ||
Object.keys(params.data).length > 0
) {
params.body = params.data;
}
}
} else {
ui: Adds Partitions to the HTTP layer (#10447) This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app. The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions. Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case. Notes: Added a PartitionAbility while we were there (not used as yet) Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP. We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different! We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet. All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
2021-09-15 17:09:55 +00:00
const str = QueryParams.stringify(params.data);
if (str.length > 0) {
if (params.url.indexOf('?') !== -1) {
params.url = `${params.url}&${str}`;
} else {
params.url = `${params.url}?${str}`;
}
}
}
}
// temporarily reset the headers/content-type so it works the same
// as previously, should be able to remove this once the data layer
// rewrite is over and we can assert sending via form-encoded is fine
// also see adapters/kv content-types in requestForCreate/UpdateRecord
// also see https://github.com/hashicorp/consul/issues/3804
params.headers[CONTENT_TYPE] = 'application/json; charset=utf-8';
return params;
}
fetchWithToken(path, params) {
return this.settings.findBySlug('token').then(token => {
return fetch(`${path}`, {
...params,
headers: {
'X-Consul-Token': typeof token.SecretID === 'undefined' ? '' : token.SecretID,
...params.headers,
},
});
});
}
request(cb) {
ui: UI Release Merge (ui-staging merge) (#6527) ## HTTPAdapter (#5637) ## Ember upgrade 2.18 > 3.12 (#6448) ### Proxies can no longer get away with not calling _super This means that we can't use create anymore to define dynamic methods. Therefore we dynamically make 2 extended Proxies on demand, and then create from those. Therefore we can call _super in the init method of the extended Proxies. ### We aren't allowed to reset a service anymore We never actually need to now anyway, this is a remnant of the refactor from browser based confirmations. We fix it as simply as possible here but will revisit and remove the old browser confirm functionality at a later date ### Revert classes to use ES5 style to workaround babel transp. probs Using a mixture of ES6 classes (and hence super) and arrow functions means that when babel transpiles the arrow functions down to ES5, a reference to this is moved before the call to super, hence causing a js error. Furthermore, we the testing environment no longer lets use use apply/call on the constructor. These errors only manifests during testing (only in the testing environment), the application itself runs fine with no problems without this change. Using ES5 style class definitions give us freedom to do all of the above without causing any errors, so we reverted these classes back to ES5 class definitions ### Skip test that seems to have changed due to a change in RSVP timing This test tests a usecase/area of the API that will probably never ever be used, it was more testing out the API. We've skipped the test for now as this doesn't affect the application itself, but left a note to come back here later to investigate further ### Remove enumerableContentDidChange Initial testing looks like we don't need to call this function anymore, the function no longer exists ### Rework Changeset.isSaving to take into account new ember APIs Setting/hanging a computedProperty of an instantiated object no longer works. Move to setting it on the prototype/class definition instead ### Change how we detect whether something requires listening New ember API's have changed how you can detect whether something is a computedProperty or not. It's not immediately clear if its even possible now. Therefore we change how we detect whether something should be listened to or not by just looking for presence of `addEventListener` ### Potentially temporary change of ci test scripts to ensure deps exist All our tooling scripts run through a Makefile (for people familiar with only using those), which then call yarn scripts which can be called independently (for people familar with only using yarn). The Makefile targets always check to make sure all the dependencies are installed before running anything that requires them (building, testing etc). The CI scripts/targets didn't follow this same route and called the yarn scripts directly (usually CI builds a cache of the dependencies first). For some reason this cache isn't doing what it usually does, and it looks as though, in CI, ember isn't installed. This commit makes the CI scripts consistently use the same method as all of the other tooling scripts (Makefile target > Install Deps if required > call yarn script). This should install the dependencies if for some reason the CI cache building doesn't complete/isn't successful. Potentially this commit may be reverted if, the root of the problem is elsewhere, although consistency is always good, so it might be a good idea to leave this commit as is even if we need to debug and fix things elsewhere. ### Make test-parallel consistent with the rest of the tooling scripts As we are here making changes for CI purposes (making test-ci consistent), we spotted that test-parallel is also inconsistent and also the README manual instructions won't work without `ember` installed globally. This commit makes everything consistent and changes the manual instructions to use the local ember instance that gets installed via yarn ### Re-wrangle catchable to fit with new ember 3.12 APIs In the upgrade from ember 3.8 > 3.12 the public interfaces for ComputedProperties have changed slightly. `meta` is no longer a public property of ComputedProperty but of a ComputedDecoratorImpl mixin instead. https://github.com/emberjs/ember.js/blob/7e4ba1096e3c2e3e0dde186d5ca52ff19cb8720a/packages/%40ember/-internals/metal/lib/computed.ts#L725 There seems to be no way, by just using publically available methods, to replicate this behaviour so that we can create our own 'ComputedProperty` factory via injecting the ComputedProperty class as we did previously. https://github.com/hashicorp/consul/blob/3f333bada181aaf6340523ca2268a28d1a7db214/ui-v2/app/utils/computed/factory.js#L1-L18 Instead we dynamically hang our `Catchable` `catch` method off the instantiated ComputedProperty. In doing it like this `ComputedProperty` has already has its `meta` method mixed in so we don't have to manually mix it in ourselves (which doesn't seem possible) This functionality is only used during our work in trying to ensure our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e. using the traditional Route.model hooks and ember-like Controller properties). Our ongoing/upcoming work on a componentized approach to data a.k.a `<DataSource />` means we will be able to remove the majority of the code involved here now that it seems to be under an amount of flux in ember. ### Build bindata_assetfs.go with new UI changes
2019-09-30 13:47:49 +00:00
const client = this;
return cb(function(strs, ...values) {
const params = client.requestParams(...arguments);
return client.settings.findBySlug('token').then(token => {
const options = {
...params,
headers: {
[CONSUL_TOKEN]: typeof token.SecretID === 'undefined' ? '' : token.SecretID,
...params.headers,
ui: UI Release Merge (ui-staging merge) (#6527) ## HTTPAdapter (#5637) ## Ember upgrade 2.18 > 3.12 (#6448) ### Proxies can no longer get away with not calling _super This means that we can't use create anymore to define dynamic methods. Therefore we dynamically make 2 extended Proxies on demand, and then create from those. Therefore we can call _super in the init method of the extended Proxies. ### We aren't allowed to reset a service anymore We never actually need to now anyway, this is a remnant of the refactor from browser based confirmations. We fix it as simply as possible here but will revisit and remove the old browser confirm functionality at a later date ### Revert classes to use ES5 style to workaround babel transp. probs Using a mixture of ES6 classes (and hence super) and arrow functions means that when babel transpiles the arrow functions down to ES5, a reference to this is moved before the call to super, hence causing a js error. Furthermore, we the testing environment no longer lets use use apply/call on the constructor. These errors only manifests during testing (only in the testing environment), the application itself runs fine with no problems without this change. Using ES5 style class definitions give us freedom to do all of the above without causing any errors, so we reverted these classes back to ES5 class definitions ### Skip test that seems to have changed due to a change in RSVP timing This test tests a usecase/area of the API that will probably never ever be used, it was more testing out the API. We've skipped the test for now as this doesn't affect the application itself, but left a note to come back here later to investigate further ### Remove enumerableContentDidChange Initial testing looks like we don't need to call this function anymore, the function no longer exists ### Rework Changeset.isSaving to take into account new ember APIs Setting/hanging a computedProperty of an instantiated object no longer works. Move to setting it on the prototype/class definition instead ### Change how we detect whether something requires listening New ember API's have changed how you can detect whether something is a computedProperty or not. It's not immediately clear if its even possible now. Therefore we change how we detect whether something should be listened to or not by just looking for presence of `addEventListener` ### Potentially temporary change of ci test scripts to ensure deps exist All our tooling scripts run through a Makefile (for people familiar with only using those), which then call yarn scripts which can be called independently (for people familar with only using yarn). The Makefile targets always check to make sure all the dependencies are installed before running anything that requires them (building, testing etc). The CI scripts/targets didn't follow this same route and called the yarn scripts directly (usually CI builds a cache of the dependencies first). For some reason this cache isn't doing what it usually does, and it looks as though, in CI, ember isn't installed. This commit makes the CI scripts consistently use the same method as all of the other tooling scripts (Makefile target > Install Deps if required > call yarn script). This should install the dependencies if for some reason the CI cache building doesn't complete/isn't successful. Potentially this commit may be reverted if, the root of the problem is elsewhere, although consistency is always good, so it might be a good idea to leave this commit as is even if we need to debug and fix things elsewhere. ### Make test-parallel consistent with the rest of the tooling scripts As we are here making changes for CI purposes (making test-ci consistent), we spotted that test-parallel is also inconsistent and also the README manual instructions won't work without `ember` installed globally. This commit makes everything consistent and changes the manual instructions to use the local ember instance that gets installed via yarn ### Re-wrangle catchable to fit with new ember 3.12 APIs In the upgrade from ember 3.8 > 3.12 the public interfaces for ComputedProperties have changed slightly. `meta` is no longer a public property of ComputedProperty but of a ComputedDecoratorImpl mixin instead. https://github.com/emberjs/ember.js/blob/7e4ba1096e3c2e3e0dde186d5ca52ff19cb8720a/packages/%40ember/-internals/metal/lib/computed.ts#L725 There seems to be no way, by just using publically available methods, to replicate this behaviour so that we can create our own 'ComputedProperty` factory via injecting the ComputedProperty class as we did previously. https://github.com/hashicorp/consul/blob/3f333bada181aaf6340523ca2268a28d1a7db214/ui-v2/app/utils/computed/factory.js#L1-L18 Instead we dynamically hang our `Catchable` `catch` method off the instantiated ComputedProperty. In doing it like this `ComputedProperty` has already has its `meta` method mixed in so we don't have to manually mix it in ourselves (which doesn't seem possible) This functionality is only used during our work in trying to ensure our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e. using the traditional Route.model hooks and ember-like Controller properties). Our ongoing/upcoming work on a componentized approach to data a.k.a `<DataSource />` means we will be able to remove the majority of the code involved here now that it seems to be under an amount of flux in ember. ### Build bindata_assetfs.go with new UI changes
2019-09-30 13:47:49 +00:00
},
};
const request = client.transport.request(options);
return new Promise((resolve, reject) => {
const remove = client._listeners.add(request, {
open: e => {
client.acquire(e.target);
},
message: e => {
const headers = {
...Object.entries(e.data.headers).reduce(function(prev, [key, value], i) {
if (!CLIENT_HEADERS.includes(key)) {
prev[key] = value;
}
return prev;
}, {}),
...params.clientHeaders,
ui: Partitions Application Layer (#11017) * Add Partition to all our models * Add partitions into our serializers/fingerprinting * Make some amends to a few adapters ready for partitions * Amend blueprints to avoid linting error * Update all our repositories to include partitions, also Remove enabled/disable nspace repo and just use a nspace with conditionals * Ensure nspace and parition parameters always return '' no matter what * Ensure data-sink finds the model properly This will later be replaced by a @dataSink decorator but we are find kicking that can down the road a little more * Add all the new partition data layer * Add a way to set the title of the page from inside the route and make it accessibile via a route announcer * Make the Consul Route the default/basic one * Tweak nspace and partition abilities not to check the length * Thread partition through all the components that need it * Some ACL tweaks * Move the entire app to use partitions * Delete all the tests we no longer need * Update some Unit tests to use partition * Fix up KV title tests * Fix up a few more acceptance tests * Fixup and temporarily ignore some acceptance tests * Stop using ember-cli-page-objects fillable as it doesn't seem to work * Fix lint error * Remove old ACL related test * Add a tick after filling out forms * Fix token warning modal * Found some more places where we need a partition var * Fixup some more acceptance tests * Tokens still needs a repo service for CRUD * Remove acceptance tests we no longer need * Fixup and "FIXME ignore" a few tests * Remove an s * Disable blocking queries for KV to revert to previous release for now * Fixup adapter tests to follow async/function resolving interface * Fixup all the serializer integration tests * Fixup service/repo integration tests * Fixup deleting acceptance test * Fixup some ent tests * Make sure nspaces passes the dc through for when thats important * ...aaaand acceptance nspaces with the extra dc param
2021-09-15 18:50:11 +00:00
// Add a 'pretend' Datacenter/Nspace/Partition header, they are
// not headers the come from the request but we add them here so
// we can use them later for store reconciliation. Namespace
// will look at the ns query parameter first, followed by the
// Namespace property of the users token, defaulting back to
// 'default' which will mainly be used in OSS
ui: Adds Partitions to the HTTP layer (#10447) This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app. The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions. Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case. Notes: Added a PartitionAbility while we were there (not used as yet) Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP. We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different! We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet. All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
2021-09-15 17:09:55 +00:00
[CONSUL_DATACENTER]: params.data.dc,
[CONSUL_NAMESPACE]: params.data.ns || token.Namespace || 'default',
ui: Partitions Application Layer (#11017) * Add Partition to all our models * Add partitions into our serializers/fingerprinting * Make some amends to a few adapters ready for partitions * Amend blueprints to avoid linting error * Update all our repositories to include partitions, also Remove enabled/disable nspace repo and just use a nspace with conditionals * Ensure nspace and parition parameters always return '' no matter what * Ensure data-sink finds the model properly This will later be replaced by a @dataSink decorator but we are find kicking that can down the road a little more * Add all the new partition data layer * Add a way to set the title of the page from inside the route and make it accessibile via a route announcer * Make the Consul Route the default/basic one * Tweak nspace and partition abilities not to check the length * Thread partition through all the components that need it * Some ACL tweaks * Move the entire app to use partitions * Delete all the tests we no longer need * Update some Unit tests to use partition * Fix up KV title tests * Fix up a few more acceptance tests * Fixup and temporarily ignore some acceptance tests * Stop using ember-cli-page-objects fillable as it doesn't seem to work * Fix lint error * Remove old ACL related test * Add a tick after filling out forms * Fix token warning modal * Found some more places where we need a partition var * Fixup some more acceptance tests * Tokens still needs a repo service for CRUD * Remove acceptance tests we no longer need * Fixup and "FIXME ignore" a few tests * Remove an s * Disable blocking queries for KV to revert to previous release for now * Fixup adapter tests to follow async/function resolving interface * Fixup all the serializer integration tests * Fixup service/repo integration tests * Fixup deleting acceptance test * Fixup some ent tests * Make sure nspaces passes the dc through for when thats important * ...aaaand acceptance nspaces with the extra dc param
2021-09-15 18:50:11 +00:00
[CONSUL_PARTITION]: params.data.partition || token.Partition || 'default',
};
const respond = function(cb) {
return cb(headers, e.data.response);
};
next(() => resolve(respond));
},
error: e => {
next(() => reject(e.error));
ui: UI Release Merge (ui-staging merge) (#6527) ## HTTPAdapter (#5637) ## Ember upgrade 2.18 > 3.12 (#6448) ### Proxies can no longer get away with not calling _super This means that we can't use create anymore to define dynamic methods. Therefore we dynamically make 2 extended Proxies on demand, and then create from those. Therefore we can call _super in the init method of the extended Proxies. ### We aren't allowed to reset a service anymore We never actually need to now anyway, this is a remnant of the refactor from browser based confirmations. We fix it as simply as possible here but will revisit and remove the old browser confirm functionality at a later date ### Revert classes to use ES5 style to workaround babel transp. probs Using a mixture of ES6 classes (and hence super) and arrow functions means that when babel transpiles the arrow functions down to ES5, a reference to this is moved before the call to super, hence causing a js error. Furthermore, we the testing environment no longer lets use use apply/call on the constructor. These errors only manifests during testing (only in the testing environment), the application itself runs fine with no problems without this change. Using ES5 style class definitions give us freedom to do all of the above without causing any errors, so we reverted these classes back to ES5 class definitions ### Skip test that seems to have changed due to a change in RSVP timing This test tests a usecase/area of the API that will probably never ever be used, it was more testing out the API. We've skipped the test for now as this doesn't affect the application itself, but left a note to come back here later to investigate further ### Remove enumerableContentDidChange Initial testing looks like we don't need to call this function anymore, the function no longer exists ### Rework Changeset.isSaving to take into account new ember APIs Setting/hanging a computedProperty of an instantiated object no longer works. Move to setting it on the prototype/class definition instead ### Change how we detect whether something requires listening New ember API's have changed how you can detect whether something is a computedProperty or not. It's not immediately clear if its even possible now. Therefore we change how we detect whether something should be listened to or not by just looking for presence of `addEventListener` ### Potentially temporary change of ci test scripts to ensure deps exist All our tooling scripts run through a Makefile (for people familiar with only using those), which then call yarn scripts which can be called independently (for people familar with only using yarn). The Makefile targets always check to make sure all the dependencies are installed before running anything that requires them (building, testing etc). The CI scripts/targets didn't follow this same route and called the yarn scripts directly (usually CI builds a cache of the dependencies first). For some reason this cache isn't doing what it usually does, and it looks as though, in CI, ember isn't installed. This commit makes the CI scripts consistently use the same method as all of the other tooling scripts (Makefile target > Install Deps if required > call yarn script). This should install the dependencies if for some reason the CI cache building doesn't complete/isn't successful. Potentially this commit may be reverted if, the root of the problem is elsewhere, although consistency is always good, so it might be a good idea to leave this commit as is even if we need to debug and fix things elsewhere. ### Make test-parallel consistent with the rest of the tooling scripts As we are here making changes for CI purposes (making test-ci consistent), we spotted that test-parallel is also inconsistent and also the README manual instructions won't work without `ember` installed globally. This commit makes everything consistent and changes the manual instructions to use the local ember instance that gets installed via yarn ### Re-wrangle catchable to fit with new ember 3.12 APIs In the upgrade from ember 3.8 > 3.12 the public interfaces for ComputedProperties have changed slightly. `meta` is no longer a public property of ComputedProperty but of a ComputedDecoratorImpl mixin instead. https://github.com/emberjs/ember.js/blob/7e4ba1096e3c2e3e0dde186d5ca52ff19cb8720a/packages/%40ember/-internals/metal/lib/computed.ts#L725 There seems to be no way, by just using publically available methods, to replicate this behaviour so that we can create our own 'ComputedProperty` factory via injecting the ComputedProperty class as we did previously. https://github.com/hashicorp/consul/blob/3f333bada181aaf6340523ca2268a28d1a7db214/ui-v2/app/utils/computed/factory.js#L1-L18 Instead we dynamically hang our `Catchable` `catch` method off the instantiated ComputedProperty. In doing it like this `ComputedProperty` has already has its `meta` method mixed in so we don't have to manually mix it in ourselves (which doesn't seem possible) This functionality is only used during our work in trying to ensure our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e. using the traditional Route.model hooks and ember-like Controller properties). Our ongoing/upcoming work on a componentized approach to data a.k.a `<DataSource />` means we will be able to remove the majority of the code involved here now that it seems to be under an amount of flux in ember. ### Build bindata_assetfs.go with new UI changes
2019-09-30 13:47:49 +00:00
},
close: e => {
client.release(e.target);
remove();
},
});
request.fetch();
});
ui: UI Release Merge (ui-staging merge) (#6527) ## HTTPAdapter (#5637) ## Ember upgrade 2.18 > 3.12 (#6448) ### Proxies can no longer get away with not calling _super This means that we can't use create anymore to define dynamic methods. Therefore we dynamically make 2 extended Proxies on demand, and then create from those. Therefore we can call _super in the init method of the extended Proxies. ### We aren't allowed to reset a service anymore We never actually need to now anyway, this is a remnant of the refactor from browser based confirmations. We fix it as simply as possible here but will revisit and remove the old browser confirm functionality at a later date ### Revert classes to use ES5 style to workaround babel transp. probs Using a mixture of ES6 classes (and hence super) and arrow functions means that when babel transpiles the arrow functions down to ES5, a reference to this is moved before the call to super, hence causing a js error. Furthermore, we the testing environment no longer lets use use apply/call on the constructor. These errors only manifests during testing (only in the testing environment), the application itself runs fine with no problems without this change. Using ES5 style class definitions give us freedom to do all of the above without causing any errors, so we reverted these classes back to ES5 class definitions ### Skip test that seems to have changed due to a change in RSVP timing This test tests a usecase/area of the API that will probably never ever be used, it was more testing out the API. We've skipped the test for now as this doesn't affect the application itself, but left a note to come back here later to investigate further ### Remove enumerableContentDidChange Initial testing looks like we don't need to call this function anymore, the function no longer exists ### Rework Changeset.isSaving to take into account new ember APIs Setting/hanging a computedProperty of an instantiated object no longer works. Move to setting it on the prototype/class definition instead ### Change how we detect whether something requires listening New ember API's have changed how you can detect whether something is a computedProperty or not. It's not immediately clear if its even possible now. Therefore we change how we detect whether something should be listened to or not by just looking for presence of `addEventListener` ### Potentially temporary change of ci test scripts to ensure deps exist All our tooling scripts run through a Makefile (for people familiar with only using those), which then call yarn scripts which can be called independently (for people familar with only using yarn). The Makefile targets always check to make sure all the dependencies are installed before running anything that requires them (building, testing etc). The CI scripts/targets didn't follow this same route and called the yarn scripts directly (usually CI builds a cache of the dependencies first). For some reason this cache isn't doing what it usually does, and it looks as though, in CI, ember isn't installed. This commit makes the CI scripts consistently use the same method as all of the other tooling scripts (Makefile target > Install Deps if required > call yarn script). This should install the dependencies if for some reason the CI cache building doesn't complete/isn't successful. Potentially this commit may be reverted if, the root of the problem is elsewhere, although consistency is always good, so it might be a good idea to leave this commit as is even if we need to debug and fix things elsewhere. ### Make test-parallel consistent with the rest of the tooling scripts As we are here making changes for CI purposes (making test-ci consistent), we spotted that test-parallel is also inconsistent and also the README manual instructions won't work without `ember` installed globally. This commit makes everything consistent and changes the manual instructions to use the local ember instance that gets installed via yarn ### Re-wrangle catchable to fit with new ember 3.12 APIs In the upgrade from ember 3.8 > 3.12 the public interfaces for ComputedProperties have changed slightly. `meta` is no longer a public property of ComputedProperty but of a ComputedDecoratorImpl mixin instead. https://github.com/emberjs/ember.js/blob/7e4ba1096e3c2e3e0dde186d5ca52ff19cb8720a/packages/%40ember/-internals/metal/lib/computed.ts#L725 There seems to be no way, by just using publically available methods, to replicate this behaviour so that we can create our own 'ComputedProperty` factory via injecting the ComputedProperty class as we did previously. https://github.com/hashicorp/consul/blob/3f333bada181aaf6340523ca2268a28d1a7db214/ui-v2/app/utils/computed/factory.js#L1-L18 Instead we dynamically hang our `Catchable` `catch` method off the instantiated ComputedProperty. In doing it like this `ComputedProperty` has already has its `meta` method mixed in so we don't have to manually mix it in ourselves (which doesn't seem possible) This functionality is only used during our work in trying to ensure our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e. using the traditional Route.model hooks and ember-like Controller properties). Our ongoing/upcoming work on a componentized approach to data a.k.a `<DataSource />` means we will be able to remove the majority of the code involved here now that it seems to be under an amount of flux in ember. ### Build bindata_assetfs.go with new UI changes
2019-09-30 13:47:49 +00:00
});
});
}
whenAvailable(e) {
return this.connections.whenAvailable(e);
}
abort() {
return this.connections.purge(...arguments);
}
acquire() {
return this.connections.acquire(...arguments);
}
release() {
ui: UI Release Merge (ui-staging merge) (#6527) ## HTTPAdapter (#5637) ## Ember upgrade 2.18 > 3.12 (#6448) ### Proxies can no longer get away with not calling _super This means that we can't use create anymore to define dynamic methods. Therefore we dynamically make 2 extended Proxies on demand, and then create from those. Therefore we can call _super in the init method of the extended Proxies. ### We aren't allowed to reset a service anymore We never actually need to now anyway, this is a remnant of the refactor from browser based confirmations. We fix it as simply as possible here but will revisit and remove the old browser confirm functionality at a later date ### Revert classes to use ES5 style to workaround babel transp. probs Using a mixture of ES6 classes (and hence super) and arrow functions means that when babel transpiles the arrow functions down to ES5, a reference to this is moved before the call to super, hence causing a js error. Furthermore, we the testing environment no longer lets use use apply/call on the constructor. These errors only manifests during testing (only in the testing environment), the application itself runs fine with no problems without this change. Using ES5 style class definitions give us freedom to do all of the above without causing any errors, so we reverted these classes back to ES5 class definitions ### Skip test that seems to have changed due to a change in RSVP timing This test tests a usecase/area of the API that will probably never ever be used, it was more testing out the API. We've skipped the test for now as this doesn't affect the application itself, but left a note to come back here later to investigate further ### Remove enumerableContentDidChange Initial testing looks like we don't need to call this function anymore, the function no longer exists ### Rework Changeset.isSaving to take into account new ember APIs Setting/hanging a computedProperty of an instantiated object no longer works. Move to setting it on the prototype/class definition instead ### Change how we detect whether something requires listening New ember API's have changed how you can detect whether something is a computedProperty or not. It's not immediately clear if its even possible now. Therefore we change how we detect whether something should be listened to or not by just looking for presence of `addEventListener` ### Potentially temporary change of ci test scripts to ensure deps exist All our tooling scripts run through a Makefile (for people familiar with only using those), which then call yarn scripts which can be called independently (for people familar with only using yarn). The Makefile targets always check to make sure all the dependencies are installed before running anything that requires them (building, testing etc). The CI scripts/targets didn't follow this same route and called the yarn scripts directly (usually CI builds a cache of the dependencies first). For some reason this cache isn't doing what it usually does, and it looks as though, in CI, ember isn't installed. This commit makes the CI scripts consistently use the same method as all of the other tooling scripts (Makefile target > Install Deps if required > call yarn script). This should install the dependencies if for some reason the CI cache building doesn't complete/isn't successful. Potentially this commit may be reverted if, the root of the problem is elsewhere, although consistency is always good, so it might be a good idea to leave this commit as is even if we need to debug and fix things elsewhere. ### Make test-parallel consistent with the rest of the tooling scripts As we are here making changes for CI purposes (making test-ci consistent), we spotted that test-parallel is also inconsistent and also the README manual instructions won't work without `ember` installed globally. This commit makes everything consistent and changes the manual instructions to use the local ember instance that gets installed via yarn ### Re-wrangle catchable to fit with new ember 3.12 APIs In the upgrade from ember 3.8 > 3.12 the public interfaces for ComputedProperties have changed slightly. `meta` is no longer a public property of ComputedProperty but of a ComputedDecoratorImpl mixin instead. https://github.com/emberjs/ember.js/blob/7e4ba1096e3c2e3e0dde186d5ca52ff19cb8720a/packages/%40ember/-internals/metal/lib/computed.ts#L725 There seems to be no way, by just using publically available methods, to replicate this behaviour so that we can create our own 'ComputedProperty` factory via injecting the ComputedProperty class as we did previously. https://github.com/hashicorp/consul/blob/3f333bada181aaf6340523ca2268a28d1a7db214/ui-v2/app/utils/computed/factory.js#L1-L18 Instead we dynamically hang our `Catchable` `catch` method off the instantiated ComputedProperty. In doing it like this `ComputedProperty` has already has its `meta` method mixed in so we don't have to manually mix it in ourselves (which doesn't seem possible) This functionality is only used during our work in trying to ensure our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e. using the traditional Route.model hooks and ember-like Controller properties). Our ongoing/upcoming work on a componentized approach to data a.k.a `<DataSource />` means we will be able to remove the majority of the code involved here now that it seems to be under an amount of flux in ember. ### Build bindata_assetfs.go with new UI changes
2019-09-30 13:47:49 +00:00
return this.connections.release(...arguments);
}
}