open-consul/test/integration/connect/envoy/run-tests.sh

629 lines
16 KiB
Bash
Raw Normal View History

#!/usr/bin/env bash
set -eEuo pipefail
readonly self_name="$0"
readonly HASHICORP_DOCKER_PROXY="docker.mirror.hashicorp.services"
# DEBUG=1 enables set -x for this script so echos every command run
DEBUG=${DEBUG:-}
OLD_XDSV2_AWARE_CONSUL_VERSION="${OLD_XDSV2_AWARE_CONSUL_VERSION:-"${HASHICORP_DOCKER_PROXY}/library/consul:1.9.8"}"
export OLD_XDSV2_AWARE_CONSUL_VERSION
# TEST_V2_XDS=1 causes it to do just the 'consul connect envoy' part using
# the consul version in $OLD_XDSV2_AWARE_CONSUL_VERSION
TEST_V2_XDS=${TEST_V2_XDS:-}
export TEST_V2_XDS
# ENVOY_VERSION to run each test against
ENVOY_VERSION=${ENVOY_VERSION:-"1.18.4"}
export ENVOY_VERSION
if [ ! -z "$DEBUG" ] ; then
set -x
fi
if [[ -n "$TEST_V2_XDS" ]] ; then
if [[ ! "${ENVOY_VERSION}" =~ ^1\.1[456]\. ]]; then
echo "Envoy version ${ENVOY_VERSION} is not compatible with Consul 1.9.8 so we cannot test the xDS v2 fallback code"
exit 1
fi
fi
source helpers.bash
function command_error {
echo "ERR: command exited with status $1" 1>&2
echo " command: $2" 1>&2
echo " line: $3" 1>&2
echo " function: $4" 1>&2
echo " called at: $5" 1>&2
# printf '%s\n' "${FUNCNAME[@]}"
# printf '%s\n' "${BASH_SOURCE[@]}"
# printf '%s\n' "${BASH_LINENO[@]}"
}
trap 'command_error $? "${BASH_COMMAND}" "${LINENO}" "${FUNCNAME[0]:-main}" "${BASH_SOURCE[0]}:${BASH_LINENO[0]}"' ERR
readonly WORKDIR_SNIPPET='-v envoy_workdir:/workdir'
function network_snippet {
local DC="$1"
echo "--net container:envoy_consul-${DC}_1"
}
function init_workdir {
local DC="$1"
if test -z "$DC"
then
DC=primary
fi
# Note, we use explicit set of dirs so we don't delete .gitignore. Also,
# don't wipe logs between runs as they are already split and we need them to
# upload as artifacts later.
rm -rf workdir/${DC}
mkdir -p workdir/${DC}/{consul,register,envoy,bats,statsd,data}
# Reload consul config from defaults
cp consul-base-cfg/*.hcl workdir/${DC}/consul/
# Add any overrides if there are any (no op if not)
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
find ${CASE_DIR} -maxdepth 1 -name '*.hcl' -type f -exec cp -f {} workdir/${DC}/consul \;
# Copy all the test files
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
2019-08-02 03:03:34 +00:00
find ${CASE_DIR} -maxdepth 1 -name '*.bats' -type f -exec cp -f {} workdir/${DC}/bats \;
# Copy DC specific bats
cp helpers.bash workdir/${DC}/bats
# Add any DC overrides
if test -d "${CASE_DIR}/${DC}"
then
find ${CASE_DIR}/${DC} -type f -name '*.hcl' -exec cp -f {} workdir/${DC}/consul \;
find ${CASE_DIR}/${DC} -type f -name '*.bats' -exec cp -f {} workdir/${DC}/bats \;
fi
# move all of the registration files OUT of the consul config dir now
find workdir/${DC}/consul -type f -name 'service_*.hcl' -exec mv -f {} workdir/${DC}/register \;
if test -d "${CASE_DIR}/data"
then
cp -r ${CASE_DIR}/data/* workdir/${DC}/data
fi
return 0
}
function docker_kill_rm {
local name
local todo=()
for name in "$@"; do
name="envoy_${name}_1"
if docker container inspect $name &>/dev/null; then
if [[ "$name" == envoy_tcpdump-* ]]; then
echo -n "Gracefully stopping $name..."
docker stop $name &> /dev/null
echo "done"
fi
todo+=($name)
fi
done
if [[ ${#todo[@]} -eq 0 ]]; then
return 0
fi
echo -n "Killing and removing: ${todo[@]}..."
docker rm -v -f ${todo[@]} &> /dev/null
echo "done"
}
function start_consul {
local DC=${1:-primary}
# Start consul now as setup script needs it up
docker_kill_rm consul-${DC}
# 8500/8502 are for consul
# 9411 is for zipkin which shares the network with consul
# 16686 is for jaeger ui which also shares the network with consul
ports=(
'-p=8500:8500'
'-p=8502:8502'
'-p=9411:9411'
'-p=16686:16686'
)
if [[ $DC == 'secondary' ]]; then
ports=(
'-p=9500:8500'
'-p=9502:8502'
)
fi
license="${CONSUL_LICENSE:-}"
# load the consul license so we can pass it into the consul
# containers as an env var in the case that this is a consul
# enterprise test
if test -z "$license" -a -n "${CONSUL_LICENSE_PATH:-}"
then
license=$(cat $CONSUL_LICENSE_PATH)
fi
# Run consul and expose some ports to the host to make debugging locally a
# bit easier.
#
docker run -d --name envoy_consul-${DC}_1 \
--net=envoy-tests \
$WORKDIR_SNIPPET \
--hostname "consul-${DC}" \
--network-alias "consul-${DC}" \
-e "CONSUL_LICENSE=$license" \
${ports[@]} \
consul-dev \
agent -dev -datacenter "${DC}" \
-config-dir "/workdir/${DC}/consul" \
-client "0.0.0.0" >/dev/null
}
function pre_service_setup {
local DC=${1:-primary}
# Run test case setup (e.g. generating Envoy bootstrap, starting containers)
if [ -f "${CASE_DIR}/${DC}/setup.sh" ]
then
source ${CASE_DIR}/${DC}/setup.sh
else
source ${CASE_DIR}/setup.sh
fi
}
function start_services {
# Push the state to the shared docker volume (note this is because CircleCI
# can't use shared volumes)
docker cp workdir/. envoy_workdir_1:/workdir
# Start containers required
if [ ! -z "$REQUIRED_SERVICES" ] ; then
docker_kill_rm $REQUIRED_SERVICES
run_containers $REQUIRED_SERVICES
fi
return 0
}
function verify {
local DC=$1
if test -z "$DC"; then
DC=primary
fi
# Execute tests
res=0
# Nuke any previous case's verify container.
docker_kill_rm verify-${DC}
echo "Running ${DC} verification step for ${CASE_DIR}..."
if docker run --name envoy_verify-${DC}_1 -t \
-e ENVOY_VERSION \
$WORKDIR_SNIPPET \
--pid=host \
$(network_snippet $DC) \
bats-verify \
--pretty /workdir/${DC}/bats ; then
echogreen "✓ PASS"
else
echored " FAIL"
res=1
fi
return $res
}
function capture_logs {
local LOG_DIR="workdir/logs/${CASE_DIR}/${ENVOY_VERSION}"
init_vars
echo "Capturing Logs"
mkdir -p "$LOG_DIR"
services="$REQUIRED_SERVICES consul-primary"
if is_set $REQUIRE_SECONDARY
then
services="$services consul-secondary"
fi
if [ -f "${CASE_DIR}/capture.sh" ]
then
echo "Executing ${CASE_DIR}/capture.sh"
source ${CASE_DIR}/capture.sh || true
fi
for cont in $services; do
echo "Capturing log for $cont"
docker logs "envoy_${cont}_1" &> "${LOG_DIR}/${cont}.log" || {
echo "EXIT CODE $?" > "${LOG_DIR}/${cont}.log"
}
done
}
function stop_services {
# Teardown
docker_kill_rm $REQUIRED_SERVICES
docker_kill_rm consul-primary consul-secondary
}
function init_vars {
source "defaults.sh"
if [ -f "${CASE_DIR}/vars.sh" ] ; then
source "${CASE_DIR}/vars.sh"
fi
}
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
function global_setup {
if [ -f "${CASE_DIR}/global-setup.sh" ] ; then
source "${CASE_DIR}/global-setup.sh"
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
fi
}
function wipe_volumes {
docker run --rm -i \
$WORKDIR_SNIPPET \
--net=none \
"${HASHICORP_DOCKER_PROXY}/alpine" \
sh -c 'rm -rf /workdir/*'
}
function run_tests {
CASE_DIR="${CASE_DIR?CASE_DIR must be set to the path of the test case}"
CASE_NAME=$( basename $CASE_DIR | cut -c6- )
export CASE_NAME
init_vars
# Initialize the workdir
init_workdir primary
if is_set $REQUIRE_SECONDARY
then
init_workdir secondary
fi
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
global_setup
# Wipe state
wipe_volumes
# Push the state to the shared docker volume (note this is because CircleCI
# can't use shared volumes)
docker cp workdir/. envoy_workdir_1:/workdir
start_consul primary
if is_set $REQUIRE_SECONDARY; then
start_consul secondary
fi
echo "Setting up the primary datacenter"
pre_service_setup primary
if is_set $REQUIRE_SECONDARY; then
echo "Setting up the secondary datacenter"
pre_service_setup secondary
fi
echo "Starting services"
start_services
# Run the verify container and report on the output
verify primary
if is_set $REQUIRE_SECONDARY; then
verify secondary
fi
}
function test_teardown {
init_vars
stop_services
}
function workdir_cleanup {
docker_kill_rm workdir
docker volume rm -f envoy_workdir &>/dev/null || true
}
function suite_setup {
# Cleanup from any previous unclean runs.
suite_teardown
docker network create envoy-tests &>/dev/null
# Start the volume container
#
# This is a dummy container that we use to create volume and keep it
# accessible while other containers are down.
docker volume create envoy_workdir &>/dev/null
docker run -d --name envoy_workdir_1 \
$WORKDIR_SNIPPET \
--net=none \
k8s.gcr.io/pause &>/dev/null
# TODO(rb): switch back to "${HASHICORP_DOCKER_PROXY}/google/pause" once that is cached
# pre-build the verify container
echo "Rebuilding 'bats-verify' image..."
docker build -t bats-verify -f Dockerfile-bats .
# pre-build the consul+envoy container
echo "Rebuilding 'consul-dev-envoy:${ENVOY_VERSION}' image..."
docker build -t consul-dev-envoy:${ENVOY_VERSION} \
--build-arg ENVOY_VERSION=${ENVOY_VERSION} \
-f Dockerfile-consul-envoy .
}
function suite_teardown {
docker_kill_rm verify-primary verify-secondary
# this is some hilarious magic
docker_kill_rm $(grep "^function run_container_" $self_name | \
sed 's/^function run_container_\(.*\) {/\1/g')
docker_kill_rm consul-primary consul-secondary
if docker network inspect envoy-tests &>/dev/null ; then
echo -n "Deleting network 'envoy-tests'..."
docker network rm envoy-tests
echo "done"
fi
workdir_cleanup
}
function run_containers {
for name in $@ ; do
run_container $name
done
}
function run_container {
docker_kill_rm "$1"
"run_container_$1"
}
function common_run_container_service {
local service="$1"
local DC="$2"
local httpPort="$3"
local grpcPort="$4"
docker run -d --name $(container_name_prev) \
-e "FORTIO_NAME=${service}" \
$(network_snippet $DC) \
"${HASHICORP_DOCKER_PROXY}/fortio/fortio" \
server \
-http-port ":$httpPort" \
-grpc-port ":$grpcPort" \
-redirect-port disabled >/dev/null
}
function run_container_s1 {
common_run_container_service s1 primary 8080 8079
}
function run_container_s2 {
common_run_container_service s2 primary 8181 8179
}
function run_container_s2-v1 {
common_run_container_service s2-v1 primary 8182 8178
}
function run_container_s2-v2 {
common_run_container_service s2-v2 primary 8183 8177
}
function run_container_s3 {
common_run_container_service s3 primary 8282 8279
}
function run_container_s3-v1 {
common_run_container_service s3-v1 primary 8283 8278
}
function run_container_s3-v2 {
common_run_container_service s3-v2 primary 8284 8277
}
function run_container_s3-alt {
common_run_container_service s3-alt primary 8286 8280
}
function run_container_s4 {
common_run_container_service s4 primary 8382 8281
}
function run_container_s1-secondary {
common_run_container_service s1-secondary secondary 8080 8079
}
function run_container_s2-secondary {
common_run_container_service s2-secondary secondary 8181 8179
}
function common_run_container_sidecar_proxy {
local service="$1"
local DC="$2"
# Hot restart breaks since both envoys seem to interact with each other
# despite separate containers that don't share IPC namespace. Not quite
# sure how this happens but may be due to unix socket being in some shared
# location?
docker run -d --name $(container_name_prev) \
$WORKDIR_SNIPPET \
$(network_snippet $DC) \
"${HASHICORP_DOCKER_PROXY}/envoyproxy/envoy:v${ENVOY_VERSION}" \
envoy \
-c /workdir/${DC}/envoy/${service}-bootstrap.json \
-l debug \
--disable-hot-restart \
--drain-time-s 1 >/dev/null
}
function run_container_s1-sidecar-proxy {
common_run_container_sidecar_proxy s1 primary
}
function run_container_s1-sidecar-proxy-consul-exec {
docker run -d --name $(container_name) \
$(network_snippet primary) \
consul-dev-envoy:${ENVOY_VERSION} \
consul connect envoy -sidecar-for s1 \
-envoy-version ${ENVOY_VERSION} \
-- \
-l debug >/dev/null
}
function run_container_s2-sidecar-proxy {
common_run_container_sidecar_proxy s2 primary
}
function run_container_s2-v1-sidecar-proxy {
common_run_container_sidecar_proxy s2-v1 primary
}
function run_container_s2-v2-sidecar-proxy {
common_run_container_sidecar_proxy s2-v2 primary
}
function run_container_s3-sidecar-proxy {
common_run_container_sidecar_proxy s3 primary
}
function run_container_s3-v1-sidecar-proxy {
common_run_container_sidecar_proxy s3-v1 primary
}
function run_container_s3-v2-sidecar-proxy {
common_run_container_sidecar_proxy s3-v2 primary
}
function run_container_s3-alt-sidecar-proxy {
common_run_container_sidecar_proxy s3-alt primary
}
function run_container_s1-sidecar-proxy-secondary {
common_run_container_sidecar_proxy s1 secondary
}
function run_container_s2-sidecar-proxy-secondary {
common_run_container_sidecar_proxy s2 secondary
}
function common_run_container_gateway {
local name="$1"
local DC="$2"
# Hot restart breaks since both envoys seem to interact with each other
# despite separate containers that don't share IPC namespace. Not quite
# sure how this happens but may be due to unix socket being in some shared
# location?
docker run -d --name $(container_name_prev) \
$WORKDIR_SNIPPET \
$(network_snippet $DC) \
"${HASHICORP_DOCKER_PROXY}/envoyproxy/envoy:v${ENVOY_VERSION}" \
envoy \
-c /workdir/${DC}/envoy/${name}-bootstrap.json \
-l debug \
--disable-hot-restart \
--drain-time-s 1 >/dev/null
}
function run_container_gateway-primary {
common_run_container_gateway mesh-gateway primary
}
function run_container_gateway-secondary {
common_run_container_gateway mesh-gateway secondary
}
function run_container_ingress-gateway-primary {
common_run_container_gateway ingress-gateway primary
}
function run_container_terminating-gateway-primary {
common_run_container_gateway terminating-gateway primary
}
function run_container_fake-statsd {
# This magic SYSTEM incantation is needed since Envoy doesn't add newlines and so
# we need each packet to be passed to echo to add a new line before
# appending.
docker run -d --name $(container_name) \
$WORKDIR_SNIPPET \
$(network_snippet primary) \
"${HASHICORP_DOCKER_PROXY}/alpine/socat:1.7.3.4-r1" \
-u UDP-RECVFROM:8125,fork,reuseaddr \
SYSTEM:'xargs -0 echo >> /workdir/primary/statsd/statsd.log'
}
function run_container_zipkin {
docker run -d --name $(container_name) \
$WORKDIR_SNIPPET \
$(network_snippet primary) \
"${HASHICORP_DOCKER_PROXY}/openzipkin/zipkin"
}
function run_container_jaeger {
docker run -d --name $(container_name) \
$WORKDIR_SNIPPET \
$(network_snippet primary) \
"${HASHICORP_DOCKER_PROXY}/jaegertracing/all-in-one:1.11" \
--collector.zipkin.http-port=9411
}
function container_name {
echo "envoy_${FUNCNAME[1]/#run_container_/}_1"
}
function container_name_prev {
echo "envoy_${FUNCNAME[2]/#run_container_/}_1"
}
# This is a debugging tool. Run via './run-tests.sh debug_dump_volumes'
function debug_dump_volumes {
docker run --rm -it \
$WORKDIR_SNIPPET \
-v ./:/cwd \
--net=none \
"${HASHICORP_DOCKER_PROXY}/alpine" \
cp -r /workdir/. /cwd/workdir/
}
function run_container_tcpdump-primary {
# To use add "tcpdump-primary" to REQUIRED_SERVICES
common_run_container_tcpdump primary
}
function run_container_tcpdump-secondary {
# To use add "tcpdump-secondary" to REQUIRED_SERVICES
common_run_container_tcpdump secondary
}
function common_run_container_tcpdump {
local DC="$1"
# we cant run this in circle but its only here to temporarily enable.
docker build -t envoy-tcpdump -f Dockerfile-tcpdump .
docker run -d --name $(container_name_prev) \
$(network_snippet $DC) \
-v $(pwd)/workdir/${DC}/envoy/:/data \
--privileged \
envoy-tcpdump \
-v -i any \
-w "/data/${DC}.pcap"
}
case "${1-}" in
"")
echo "command required"
exit 1 ;;
*)
"$@" ;;
esac