open-consul/website/content/docs/connect/gateways/mesh-gateway/service-to-service-traffic-partitions.mdx

---
layout: docs
page_title: Service-to-service Traffic Across Partitions
description: >-
  This topic describes how to configure mesh gateways to route a service's data to upstreams
  in other partitions. It describes how to use Envoy and how you can integrate with your preferred gateway.
---

# Service-to-service Traffic Across Partitions

-> **Consul Enterprise 1.11.0+:** Admin partitions are supported in Consul Enterprise versions 1.11.0 and newer.

Mesh gateways enable you to route service mesh traffic between different Consul [admin partitions](/docs/enteprise/admin-partitions). 
Partitions can reside in different clouds or runtime environments where general interconnectivity between all services
in all partitions isn't feasible. 

Mesh gateways operate by sniffing and extracting the server name indication (SNI) header from the service mesh session and routing the connection to the appropriate destination based on the server name requested. The gateway does not decrypt the data within the mTLS session.

## Prerequisites

Ensure that your Consul environment meets the following requirements.

### Consul 

* Consul Enterprise version 1.11.0 or newer.
* A local Consul agent is required to manage its configuration.
* Consul service mesh must be enabled in all partitions. Refer to the [`connect` documentation](/docs/agent/config/agent-config-files#connect) for details.
* Each partition must have a unique name. Refer to the [admin partitions documentation](/docs/enteprise/admin-partitions) for details.
* If you want to [enable gateways globally](/docs/connect/mesh-gateway#enabling-gateways-globally) you must enable [centralized configuration](/docs/agent/config/agent-config-files#enable_central_service_config).

### Proxy 

Envoy is the only proxy with mesh gateway capabilities in Consul.

Mesh gateway proxies receive their configuration through Consul, which automatically generates it based on the proxy's registration. 
Consul can only translate mesh gateway registration information into Envoy configuration.

Sidecar proxies that send traffic to an upstream service through a gateway need to know the location of that gateway. They discover the gateway based on their sidecar proxy registrations. Consul can only translate the gateway registration information into Envoy configuration.

Sidecar proxies that do not send upstream traffic through a gateway are not affected when you deploy gateways. If you are using Consul's built-in proxy as a Connect sidecar it will continue to work for intra-datacenter traffic and will receive incoming traffic even if that traffic has passed through a gateway.

## Configuration

Configure the following settings to register the mesh gateway as a service in Consul.

* Specify `mesh-gateway` in the `kind` field to register the gateway with Consul.
* Configure the `proxy.upstreams` parameters to route traffic to the correct service, namespace, and partition. Refer to the [`upstreams` documentation](/docs/connect/registration/service-registration#upstream-configuration-reference) for details. The service `proxy.upstreams.destination_name` is always required. The `proxy.upstreams.destination_partition` must be configured to enable cross-partition traffic. The `proxy.upstreams.destination_namespace` configuration is only necessary if the destination service is in a different namespace. 
* Configure the `exported-services` configuration entry to enable Consul to export services contained in an admin partition to one or more additional partitions. Refer to the [Exported Services documentation](/docs/connect/config-entries/exported-services) for details. 
* Define the `Proxy.Config` settings using opaque parameters compatible with your proxy, i.e., Envoy. For Envoy, refer to the [Gateway Options](/docs/connect/proxies/envoy#gateway-options) and [Escape-hatch Overrides](/docs/connect/proxies/envoy#escape-hatch-overrides) documentation for additional configuration information.  
* If ACLs are enabled, a token granting `service:write` for the gateway's service name and `service:read` for all services in the datacenter or partition must be added to the gateway's service definition. These permissions authorize the token to route communications for other Consul service mesh services, but does not allow decrypting any of their communications.

### Modes

Each upstream associated with a service mesh proxy can be configured so that it is routed through a mesh gateway.  
Depending on your network, the proxy's connection to the gateway can operate in one of the following modes:

* `none` - (Default) No gateway is used and a service mesh connect proxy makes its outbound connections directly
  to the destination services.

* `local` - The service mesh connect proxy makes an outbound connection to a gateway running in the same datacenter. The gateway at the outbound connection is responsible for ensuring that the data is forwarded to gateways in the destination partition. 

* `remote` - The service mesh connect proxy makes an outbound connection to a gateway running in the destination datacenter. 
  The gateway forwards the data to the final destination service.

### Connect Proxy Configuration

Set the proxy to the preferred [mode](#modes) to configure the service mesh proxy. You can specify the mode globally or within child configurations to control proxy behaviors at a lower level. Consul recognizes the following order of precedence if the gateway mode is configured in multiple locations the order of precedence:

1. Upstream definition (highest priority)
2. Service instance definition
3. Centralized `service-defaults` configuration entry
4. Centralized `proxy-defaults` configuration entry

## Example Configurations

Use the following example configurations to help you understand some of the common scenarios.

### Enabling Gateways Globally

The following `proxy-defaults` configuration will enable gateways for all Connect services in the `local` mode.

<CodeTabs heading="Example: Enabling gateways globally.">

```hcl
Kind = "proxy-defaults"
Name = "global"
MeshGateway {
   Mode = "local"
}
```

```yaml
Kind: proxy-defaults
MeshGateway:
- Mode: local
Name: global
```

</CodeTabs>

### Enabling Gateways Per Service

The following `service-defaults` configuration will enable gateways for all Connect services with the name `web`.

<CodeTabs heading="Example: Enabling gateways per service.">

```hcl
Kind = "service-defaults"
Name = "web"
MeshGateway {
   Mode = "local"
}
```

```yaml
Kind: service-defaults
MeshGateway:
- Mode: local
Name: web
```
</CodeTabs>

### Enabling Gateways for a Service Instance

The following [Proxy Service Registration](/docs/connect/registration/service-registration)
definition will enable gateways for `web` service instances in the `finance` partition.

<CodeTabs heading="Example: Enabling gateways for a service instance.">

```hcl
service {
   name = "web-sidecar-proxy"
   kind = "connect-proxy"
   port = 8181
   proxy {
      destination_service_name = "web"
      mesh_gateway {
         mode = "local"
      }
      upstreams = [
         {
            destination_partition = "finance"
            destination_namespace = "default"
            destination_type = "service"
            destination_name = "billing"
            local_bind_port = 9090
         }
      ]
   }
}
```

```yaml
service:
- kind: connect-proxy
  name: web-sidecar-proxy
  port: 8181
  proxy:
  - destination_service_name: web
    mesh_gateway:
    - mode: local
    upstreams:
    - destination_name: billing
      destination_namespace: default
      destination_partition: finance
      destination_type: service
      local_bind_port: 9090
```
</CodeTabs>

### Enabling Gateways for a Proxy Upstream

The following service definition will enable gateways in `local` mode for three different partitions. Note that each service exists in the same namepace, but are separated by admin partition.

<CodeTabs heading="Example: Enabling gateways for a proxy upstream.">

```hcl
service {
   name = "web-sidecar-proxy"
   kind = "connect-proxy"
   port = 8181
   proxy {
      destination_service_name = "web"
      upstreams = [
         {
            destination_name = "api"
            destination_namespace = "dev"
            destination_partition = "api"
            local_bind_port = 10000
            mesh_gateway {
               mode = "local"
            }
         },
         {
            destination_name = "db"
            destination_namespace = "dev"
            destination_partition = "db"
            local_bind_port = 10001
            mesh_gateway {
               mode = "local"
            }
         },
         {
            destination_name = "logging"
            destination_namespace = "dev"
            destination_partition = "logging"
            local_bind_port = 10002
            mesh_gateway {
               mode = "local"
            }
         },
      ]
   }
}
```

```yaml
service:
- kind: connect-proxy
  name: web-sidecar-proxy
  port: 8181
  proxy:
  - destination_service_name: web
    upstreams:
    - destination_name: api
      destination_namespace: dev
      destination_partition: api
      local_bind_port: 10000
      mesh_gateway:
      - mode: local
    - destination_name: db
      destination_namespace: dev
      destination_partition: db
      local_bind_port: 10001
      mesh_gateway:
      - mode: local
    - destination_name: logging
      destination_namespace: dev
      destination_partition: logging
      local_bind_port: 10002
      mesh_gateway:
      - mode: local
```
</CodeTabs>