mirror of
https://github.com/facebook/rocksdb.git
synced 2024-11-26 16:30:56 +00:00
7528130e38
Summary: This allows tombstone fragmenting to only be performed when the table is opened, and cached for subsequent accesses. On the same DB used in #4449, running `readrandom` results in the following: ``` readrandom : 0.983 micros/op 1017076 ops/sec; 78.3 MB/s (63103 of 100000 found) ``` Now that Get performance in the presence of range tombstones is reasonable, I also compared the performance between a DB with range tombstones, "expanded" range tombstones (several point tombstones that cover the same keys the equivalent range tombstone would cover, a common workaround for DeleteRange), and no range tombstones. The created DBs had 5 million keys each, and DeleteRange was called at regular intervals (depending on the total number of range tombstones being written) after 4.5 million Puts. The table below summarizes the results of a `readwhilewriting` benchmark (in order to provide somewhat more realistic results): ``` Tombstones? | avg micros/op | stddev micros/op | avg ops/s | stddev ops/s ----------------- | ------------- | ---------------- | ------------ | ------------ None | 0.6186 | 0.04637 | 1,625,252.90 | 124,679.41 500 Expanded | 0.6019 | 0.03628 | 1,666,670.40 | 101,142.65 500 Unexpanded | 0.6435 | 0.03994 | 1,559,979.40 | 104,090.52 1k Expanded | 0.6034 | 0.04349 | 1,665,128.10 | 125,144.57 1k Unexpanded | 0.6261 | 0.03093 | 1,600,457.50 | 79,024.94 5k Expanded | 0.6163 | 0.05926 | 1,636,668.80 | 154,888.85 5k Unexpanded | 0.6402 | 0.04002 | 1,567,804.70 | 100,965.55 10k Expanded | 0.6036 | 0.05105 | 1,667,237.70 | 142,830.36 10k Unexpanded | 0.6128 | 0.02598 | 1,634,633.40 | 72,161.82 25k Expanded | 0.6198 | 0.04542 | 1,620,980.50 | 116,662.93 25k Unexpanded | 0.5478 | 0.0362 | 1,833,059.10 | 121,233.81 50k Expanded | 0.5104 | 0.04347 | 1,973,107.90 | 184,073.49 50k Unexpanded | 0.4528 | 0.03387 | 2,219,034.50 | 170,984.32 ``` After a large enough quantity of range tombstones are written, range tombstone Gets can become faster than reading from an equivalent DB with several point tombstones. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4493 Differential Revision: D10842844 Pulled By: abhimadan fbshipit-source-id: a7d44534f8120e6aabb65779d26c6b9df954c509
4466 lines
159 KiB
C++
4466 lines
159 KiB
C++
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
// (found in the LICENSE.Apache file in the root directory).
|
|
//
|
|
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
|
|
// Use of this source code is governed by a BSD-style license that can be
|
|
// found in the LICENSE file. See the AUTHORS file for names of contributors.
|
|
|
|
#include "db/version_set.h"
|
|
|
|
#ifndef __STDC_FORMAT_MACROS
|
|
#define __STDC_FORMAT_MACROS
|
|
#endif
|
|
|
|
#include <inttypes.h>
|
|
#include <stdio.h>
|
|
#include <algorithm>
|
|
#include <list>
|
|
#include <map>
|
|
#include <set>
|
|
#include <string>
|
|
#include <unordered_map>
|
|
#include <vector>
|
|
#include "db/compaction.h"
|
|
#include "db/internal_stats.h"
|
|
#include "db/log_reader.h"
|
|
#include "db/log_writer.h"
|
|
#include "db/memtable.h"
|
|
#include "db/merge_context.h"
|
|
#include "db/merge_helper.h"
|
|
#include "db/pinned_iterators_manager.h"
|
|
#include "db/table_cache.h"
|
|
#include "db/version_builder.h"
|
|
#include "monitoring/file_read_sample.h"
|
|
#include "monitoring/perf_context_imp.h"
|
|
#include "rocksdb/env.h"
|
|
#include "rocksdb/merge_operator.h"
|
|
#include "rocksdb/write_buffer_manager.h"
|
|
#include "table/format.h"
|
|
#include "table/get_context.h"
|
|
#include "table/internal_iterator.h"
|
|
#include "table/merging_iterator.h"
|
|
#include "table/meta_blocks.h"
|
|
#include "table/plain_table_factory.h"
|
|
#include "table/table_reader.h"
|
|
#include "table/two_level_iterator.h"
|
|
#include "util/coding.h"
|
|
#include "util/file_reader_writer.h"
|
|
#include "util/filename.h"
|
|
#include "util/stop_watch.h"
|
|
#include "util/string_util.h"
|
|
#include "util/sync_point.h"
|
|
|
|
namespace rocksdb {
|
|
|
|
namespace {
|
|
|
|
// Find File in LevelFilesBrief data structure
|
|
// Within an index range defined by left and right
|
|
int FindFileInRange(const InternalKeyComparator& icmp,
|
|
const LevelFilesBrief& file_level,
|
|
const Slice& key,
|
|
uint32_t left,
|
|
uint32_t right) {
|
|
auto cmp = [&](const FdWithKeyRange& f, const Slice& k) -> bool {
|
|
return icmp.InternalKeyComparator::Compare(f.largest_key, k) < 0;
|
|
};
|
|
const auto &b = file_level.files;
|
|
return static_cast<int>(std::lower_bound(b + left,
|
|
b + right, key, cmp) - b);
|
|
}
|
|
|
|
Status OverlapWithIterator(const Comparator* ucmp,
|
|
const Slice& smallest_user_key,
|
|
const Slice& largest_user_key,
|
|
InternalIterator* iter,
|
|
bool* overlap) {
|
|
InternalKey range_start(smallest_user_key, kMaxSequenceNumber,
|
|
kValueTypeForSeek);
|
|
iter->Seek(range_start.Encode());
|
|
if (!iter->status().ok()) {
|
|
return iter->status();
|
|
}
|
|
|
|
*overlap = false;
|
|
if (iter->Valid()) {
|
|
ParsedInternalKey seek_result;
|
|
if (!ParseInternalKey(iter->key(), &seek_result)) {
|
|
return Status::Corruption("DB have corrupted keys");
|
|
}
|
|
|
|
if (ucmp->Compare(seek_result.user_key, largest_user_key) <= 0) {
|
|
*overlap = true;
|
|
}
|
|
}
|
|
|
|
return iter->status();
|
|
}
|
|
|
|
// Class to help choose the next file to search for the particular key.
|
|
// Searches and returns files level by level.
|
|
// We can search level-by-level since entries never hop across
|
|
// levels. Therefore we are guaranteed that if we find data
|
|
// in a smaller level, later levels are irrelevant (unless we
|
|
// are MergeInProgress).
|
|
class FilePicker {
|
|
public:
|
|
FilePicker(std::vector<FileMetaData*>* files, const Slice& user_key,
|
|
const Slice& ikey, autovector<LevelFilesBrief>* file_levels,
|
|
unsigned int num_levels, FileIndexer* file_indexer,
|
|
const Comparator* user_comparator,
|
|
const InternalKeyComparator* internal_comparator)
|
|
: num_levels_(num_levels),
|
|
curr_level_(static_cast<unsigned int>(-1)),
|
|
returned_file_level_(static_cast<unsigned int>(-1)),
|
|
hit_file_level_(static_cast<unsigned int>(-1)),
|
|
search_left_bound_(0),
|
|
search_right_bound_(FileIndexer::kLevelMaxIndex),
|
|
#ifndef NDEBUG
|
|
files_(files),
|
|
#endif
|
|
level_files_brief_(file_levels),
|
|
is_hit_file_last_in_level_(false),
|
|
curr_file_level_(nullptr),
|
|
user_key_(user_key),
|
|
ikey_(ikey),
|
|
file_indexer_(file_indexer),
|
|
user_comparator_(user_comparator),
|
|
internal_comparator_(internal_comparator) {
|
|
#ifdef NDEBUG
|
|
(void)files;
|
|
#endif
|
|
// Setup member variables to search first level.
|
|
search_ended_ = !PrepareNextLevel();
|
|
if (!search_ended_) {
|
|
// Prefetch Level 0 table data to avoid cache miss if possible.
|
|
for (unsigned int i = 0; i < (*level_files_brief_)[0].num_files; ++i) {
|
|
auto* r = (*level_files_brief_)[0].files[i].fd.table_reader;
|
|
if (r) {
|
|
r->Prepare(ikey);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
int GetCurrentLevel() const { return curr_level_; }
|
|
|
|
FdWithKeyRange* GetNextFile() {
|
|
while (!search_ended_) { // Loops over different levels.
|
|
while (curr_index_in_curr_level_ < curr_file_level_->num_files) {
|
|
// Loops over all files in current level.
|
|
FdWithKeyRange* f = &curr_file_level_->files[curr_index_in_curr_level_];
|
|
hit_file_level_ = curr_level_;
|
|
is_hit_file_last_in_level_ =
|
|
curr_index_in_curr_level_ == curr_file_level_->num_files - 1;
|
|
int cmp_largest = -1;
|
|
|
|
// Do key range filtering of files or/and fractional cascading if:
|
|
// (1) not all the files are in level 0, or
|
|
// (2) there are more than 3 current level files
|
|
// If there are only 3 or less current level files in the system, we skip
|
|
// the key range filtering. In this case, more likely, the system is
|
|
// highly tuned to minimize number of tables queried by each query,
|
|
// so it is unlikely that key range filtering is more efficient than
|
|
// querying the files.
|
|
if (num_levels_ > 1 || curr_file_level_->num_files > 3) {
|
|
// Check if key is within a file's range. If search left bound and
|
|
// right bound point to the same find, we are sure key falls in
|
|
// range.
|
|
assert(
|
|
curr_level_ == 0 ||
|
|
curr_index_in_curr_level_ == start_index_in_curr_level_ ||
|
|
user_comparator_->Compare(user_key_,
|
|
ExtractUserKey(f->smallest_key)) <= 0);
|
|
|
|
int cmp_smallest = user_comparator_->Compare(user_key_,
|
|
ExtractUserKey(f->smallest_key));
|
|
if (cmp_smallest >= 0) {
|
|
cmp_largest = user_comparator_->Compare(user_key_,
|
|
ExtractUserKey(f->largest_key));
|
|
}
|
|
|
|
// Setup file search bound for the next level based on the
|
|
// comparison results
|
|
if (curr_level_ > 0) {
|
|
file_indexer_->GetNextLevelIndex(curr_level_,
|
|
curr_index_in_curr_level_,
|
|
cmp_smallest, cmp_largest,
|
|
&search_left_bound_,
|
|
&search_right_bound_);
|
|
}
|
|
// Key falls out of current file's range
|
|
if (cmp_smallest < 0 || cmp_largest > 0) {
|
|
if (curr_level_ == 0) {
|
|
++curr_index_in_curr_level_;
|
|
continue;
|
|
} else {
|
|
// Search next level.
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#ifndef NDEBUG
|
|
// Sanity check to make sure that the files are correctly sorted
|
|
if (prev_file_) {
|
|
if (curr_level_ != 0) {
|
|
int comp_sign = internal_comparator_->Compare(
|
|
prev_file_->largest_key, f->smallest_key);
|
|
assert(comp_sign < 0);
|
|
} else {
|
|
// level == 0, the current file cannot be newer than the previous
|
|
// one. Use compressed data structure, has no attribute seqNo
|
|
assert(curr_index_in_curr_level_ > 0);
|
|
assert(!NewestFirstBySeqNo(files_[0][curr_index_in_curr_level_],
|
|
files_[0][curr_index_in_curr_level_-1]));
|
|
}
|
|
}
|
|
prev_file_ = f;
|
|
#endif
|
|
returned_file_level_ = curr_level_;
|
|
if (curr_level_ > 0 && cmp_largest < 0) {
|
|
// No more files to search in this level.
|
|
search_ended_ = !PrepareNextLevel();
|
|
} else {
|
|
++curr_index_in_curr_level_;
|
|
}
|
|
return f;
|
|
}
|
|
// Start searching next level.
|
|
search_ended_ = !PrepareNextLevel();
|
|
}
|
|
// Search ended.
|
|
return nullptr;
|
|
}
|
|
|
|
// getter for current file level
|
|
// for GET_HIT_L0, GET_HIT_L1 & GET_HIT_L2_AND_UP counts
|
|
unsigned int GetHitFileLevel() { return hit_file_level_; }
|
|
|
|
// Returns true if the most recent "hit file" (i.e., one returned by
|
|
// GetNextFile()) is at the last index in its level.
|
|
bool IsHitFileLastInLevel() { return is_hit_file_last_in_level_; }
|
|
|
|
private:
|
|
unsigned int num_levels_;
|
|
unsigned int curr_level_;
|
|
unsigned int returned_file_level_;
|
|
unsigned int hit_file_level_;
|
|
int32_t search_left_bound_;
|
|
int32_t search_right_bound_;
|
|
#ifndef NDEBUG
|
|
std::vector<FileMetaData*>* files_;
|
|
#endif
|
|
autovector<LevelFilesBrief>* level_files_brief_;
|
|
bool search_ended_;
|
|
bool is_hit_file_last_in_level_;
|
|
LevelFilesBrief* curr_file_level_;
|
|
unsigned int curr_index_in_curr_level_;
|
|
unsigned int start_index_in_curr_level_;
|
|
Slice user_key_;
|
|
Slice ikey_;
|
|
FileIndexer* file_indexer_;
|
|
const Comparator* user_comparator_;
|
|
const InternalKeyComparator* internal_comparator_;
|
|
#ifndef NDEBUG
|
|
FdWithKeyRange* prev_file_;
|
|
#endif
|
|
|
|
// Setup local variables to search next level.
|
|
// Returns false if there are no more levels to search.
|
|
bool PrepareNextLevel() {
|
|
curr_level_++;
|
|
while (curr_level_ < num_levels_) {
|
|
curr_file_level_ = &(*level_files_brief_)[curr_level_];
|
|
if (curr_file_level_->num_files == 0) {
|
|
// When current level is empty, the search bound generated from upper
|
|
// level must be [0, -1] or [0, FileIndexer::kLevelMaxIndex] if it is
|
|
// also empty.
|
|
assert(search_left_bound_ == 0);
|
|
assert(search_right_bound_ == -1 ||
|
|
search_right_bound_ == FileIndexer::kLevelMaxIndex);
|
|
// Since current level is empty, it will need to search all files in
|
|
// the next level
|
|
search_left_bound_ = 0;
|
|
search_right_bound_ = FileIndexer::kLevelMaxIndex;
|
|
curr_level_++;
|
|
continue;
|
|
}
|
|
|
|
// Some files may overlap each other. We find
|
|
// all files that overlap user_key and process them in order from
|
|
// newest to oldest. In the context of merge-operator, this can occur at
|
|
// any level. Otherwise, it only occurs at Level-0 (since Put/Deletes
|
|
// are always compacted into a single entry).
|
|
int32_t start_index;
|
|
if (curr_level_ == 0) {
|
|
// On Level-0, we read through all files to check for overlap.
|
|
start_index = 0;
|
|
} else {
|
|
// On Level-n (n>=1), files are sorted. Binary search to find the
|
|
// earliest file whose largest key >= ikey. Search left bound and
|
|
// right bound are used to narrow the range.
|
|
if (search_left_bound_ == search_right_bound_) {
|
|
start_index = search_left_bound_;
|
|
} else if (search_left_bound_ < search_right_bound_) {
|
|
if (search_right_bound_ == FileIndexer::kLevelMaxIndex) {
|
|
search_right_bound_ =
|
|
static_cast<int32_t>(curr_file_level_->num_files) - 1;
|
|
}
|
|
start_index =
|
|
FindFileInRange(*internal_comparator_, *curr_file_level_, ikey_,
|
|
static_cast<uint32_t>(search_left_bound_),
|
|
static_cast<uint32_t>(search_right_bound_));
|
|
} else {
|
|
// search_left_bound > search_right_bound, key does not exist in
|
|
// this level. Since no comparison is done in this level, it will
|
|
// need to search all files in the next level.
|
|
search_left_bound_ = 0;
|
|
search_right_bound_ = FileIndexer::kLevelMaxIndex;
|
|
curr_level_++;
|
|
continue;
|
|
}
|
|
}
|
|
start_index_in_curr_level_ = start_index;
|
|
curr_index_in_curr_level_ = start_index;
|
|
#ifndef NDEBUG
|
|
prev_file_ = nullptr;
|
|
#endif
|
|
return true;
|
|
}
|
|
// curr_level_ = num_levels_. So, no more levels to search.
|
|
return false;
|
|
}
|
|
};
|
|
} // anonymous namespace
|
|
|
|
VersionStorageInfo::~VersionStorageInfo() { delete[] files_; }
|
|
|
|
Version::~Version() {
|
|
assert(refs_ == 0);
|
|
|
|
// Remove from linked list
|
|
prev_->next_ = next_;
|
|
next_->prev_ = prev_;
|
|
|
|
// Drop references to files
|
|
for (int level = 0; level < storage_info_.num_levels_; level++) {
|
|
for (size_t i = 0; i < storage_info_.files_[level].size(); i++) {
|
|
FileMetaData* f = storage_info_.files_[level][i];
|
|
assert(f->refs > 0);
|
|
f->refs--;
|
|
if (f->refs <= 0) {
|
|
assert(cfd_ != nullptr);
|
|
uint32_t path_id = f->fd.GetPathId();
|
|
assert(path_id < cfd_->ioptions()->cf_paths.size());
|
|
vset_->obsolete_files_.push_back(
|
|
ObsoleteFileInfo(f, cfd_->ioptions()->cf_paths[path_id].path));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
int FindFile(const InternalKeyComparator& icmp,
|
|
const LevelFilesBrief& file_level,
|
|
const Slice& key) {
|
|
return FindFileInRange(icmp, file_level, key, 0,
|
|
static_cast<uint32_t>(file_level.num_files));
|
|
}
|
|
|
|
void DoGenerateLevelFilesBrief(LevelFilesBrief* file_level,
|
|
const std::vector<FileMetaData*>& files,
|
|
Arena* arena) {
|
|
assert(file_level);
|
|
assert(arena);
|
|
|
|
size_t num = files.size();
|
|
file_level->num_files = num;
|
|
char* mem = arena->AllocateAligned(num * sizeof(FdWithKeyRange));
|
|
file_level->files = new (mem)FdWithKeyRange[num];
|
|
|
|
for (size_t i = 0; i < num; i++) {
|
|
Slice smallest_key = files[i]->smallest.Encode();
|
|
Slice largest_key = files[i]->largest.Encode();
|
|
|
|
// Copy key slice to sequential memory
|
|
size_t smallest_size = smallest_key.size();
|
|
size_t largest_size = largest_key.size();
|
|
mem = arena->AllocateAligned(smallest_size + largest_size);
|
|
memcpy(mem, smallest_key.data(), smallest_size);
|
|
memcpy(mem + smallest_size, largest_key.data(), largest_size);
|
|
|
|
FdWithKeyRange& f = file_level->files[i];
|
|
f.fd = files[i]->fd;
|
|
f.file_metadata = files[i];
|
|
f.smallest_key = Slice(mem, smallest_size);
|
|
f.largest_key = Slice(mem + smallest_size, largest_size);
|
|
}
|
|
}
|
|
|
|
static bool AfterFile(const Comparator* ucmp,
|
|
const Slice* user_key, const FdWithKeyRange* f) {
|
|
// nullptr user_key occurs before all keys and is therefore never after *f
|
|
return (user_key != nullptr &&
|
|
ucmp->Compare(*user_key, ExtractUserKey(f->largest_key)) > 0);
|
|
}
|
|
|
|
static bool BeforeFile(const Comparator* ucmp,
|
|
const Slice* user_key, const FdWithKeyRange* f) {
|
|
// nullptr user_key occurs after all keys and is therefore never before *f
|
|
return (user_key != nullptr &&
|
|
ucmp->Compare(*user_key, ExtractUserKey(f->smallest_key)) < 0);
|
|
}
|
|
|
|
bool SomeFileOverlapsRange(
|
|
const InternalKeyComparator& icmp,
|
|
bool disjoint_sorted_files,
|
|
const LevelFilesBrief& file_level,
|
|
const Slice* smallest_user_key,
|
|
const Slice* largest_user_key) {
|
|
const Comparator* ucmp = icmp.user_comparator();
|
|
if (!disjoint_sorted_files) {
|
|
// Need to check against all files
|
|
for (size_t i = 0; i < file_level.num_files; i++) {
|
|
const FdWithKeyRange* f = &(file_level.files[i]);
|
|
if (AfterFile(ucmp, smallest_user_key, f) ||
|
|
BeforeFile(ucmp, largest_user_key, f)) {
|
|
// No overlap
|
|
} else {
|
|
return true; // Overlap
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// Binary search over file list
|
|
uint32_t index = 0;
|
|
if (smallest_user_key != nullptr) {
|
|
// Find the leftmost possible internal key for smallest_user_key
|
|
InternalKey small;
|
|
small.SetMinPossibleForUserKey(*smallest_user_key);
|
|
index = FindFile(icmp, file_level, small.Encode());
|
|
}
|
|
|
|
if (index >= file_level.num_files) {
|
|
// beginning of range is after all files, so no overlap.
|
|
return false;
|
|
}
|
|
|
|
return !BeforeFile(ucmp, largest_user_key, &file_level.files[index]);
|
|
}
|
|
|
|
namespace {
|
|
|
|
class LevelIterator final : public InternalIterator {
|
|
public:
|
|
LevelIterator(TableCache* table_cache, const ReadOptions& read_options,
|
|
const EnvOptions& env_options,
|
|
const InternalKeyComparator& icomparator,
|
|
const LevelFilesBrief* flevel,
|
|
const SliceTransform* prefix_extractor, bool should_sample,
|
|
HistogramImpl* file_read_hist, bool for_compaction,
|
|
bool skip_filters, int level, RangeDelAggregator* range_del_agg,
|
|
const std::vector<AtomicCompactionUnitBoundary>*
|
|
compaction_boundaries = nullptr)
|
|
: table_cache_(table_cache),
|
|
read_options_(read_options),
|
|
env_options_(env_options),
|
|
icomparator_(icomparator),
|
|
flevel_(flevel),
|
|
prefix_extractor_(prefix_extractor),
|
|
file_read_hist_(file_read_hist),
|
|
should_sample_(should_sample),
|
|
for_compaction_(for_compaction),
|
|
skip_filters_(skip_filters),
|
|
file_index_(flevel_->num_files),
|
|
level_(level),
|
|
range_del_agg_(range_del_agg),
|
|
pinned_iters_mgr_(nullptr),
|
|
compaction_boundaries_(compaction_boundaries) {
|
|
// Empty level is not supported.
|
|
assert(flevel_ != nullptr && flevel_->num_files > 0);
|
|
}
|
|
|
|
virtual ~LevelIterator() { delete file_iter_.Set(nullptr); }
|
|
|
|
virtual void Seek(const Slice& target) override;
|
|
virtual void SeekForPrev(const Slice& target) override;
|
|
virtual void SeekToFirst() override;
|
|
virtual void SeekToLast() override;
|
|
virtual void Next() override;
|
|
virtual void Prev() override;
|
|
|
|
virtual bool Valid() const override { return file_iter_.Valid(); }
|
|
virtual Slice key() const override {
|
|
assert(Valid());
|
|
return file_iter_.key();
|
|
}
|
|
virtual Slice value() const override {
|
|
assert(Valid());
|
|
return file_iter_.value();
|
|
}
|
|
virtual Status status() const override {
|
|
return file_iter_.iter() ? file_iter_.status() : Status::OK();
|
|
}
|
|
virtual void SetPinnedItersMgr(
|
|
PinnedIteratorsManager* pinned_iters_mgr) override {
|
|
pinned_iters_mgr_ = pinned_iters_mgr;
|
|
if (file_iter_.iter()) {
|
|
file_iter_.SetPinnedItersMgr(pinned_iters_mgr);
|
|
}
|
|
}
|
|
virtual bool IsKeyPinned() const override {
|
|
return pinned_iters_mgr_ && pinned_iters_mgr_->PinningEnabled() &&
|
|
file_iter_.iter() && file_iter_.IsKeyPinned();
|
|
}
|
|
virtual bool IsValuePinned() const override {
|
|
return pinned_iters_mgr_ && pinned_iters_mgr_->PinningEnabled() &&
|
|
file_iter_.iter() && file_iter_.IsValuePinned();
|
|
}
|
|
|
|
private:
|
|
void SkipEmptyFileForward();
|
|
void SkipEmptyFileBackward();
|
|
void SetFileIterator(InternalIterator* iter);
|
|
void InitFileIterator(size_t new_file_index);
|
|
|
|
const Slice& file_smallest_key(size_t file_index) {
|
|
assert(file_index < flevel_->num_files);
|
|
return flevel_->files[file_index].smallest_key;
|
|
}
|
|
|
|
bool KeyReachedUpperBound(const Slice& internal_key) {
|
|
return read_options_.iterate_upper_bound != nullptr &&
|
|
icomparator_.user_comparator()->Compare(
|
|
ExtractUserKey(internal_key),
|
|
*read_options_.iterate_upper_bound) >= 0;
|
|
}
|
|
|
|
InternalIterator* NewFileIterator() {
|
|
assert(file_index_ < flevel_->num_files);
|
|
auto file_meta = flevel_->files[file_index_];
|
|
if (should_sample_) {
|
|
sample_file_read_inc(file_meta.file_metadata);
|
|
}
|
|
|
|
const InternalKey* smallest_compaction_key = nullptr;
|
|
const InternalKey* largest_compaction_key = nullptr;
|
|
if (compaction_boundaries_ != nullptr) {
|
|
smallest_compaction_key = (*compaction_boundaries_)[file_index_].smallest;
|
|
largest_compaction_key = (*compaction_boundaries_)[file_index_].largest;
|
|
}
|
|
return table_cache_->NewIterator(
|
|
read_options_, env_options_, icomparator_, *file_meta.file_metadata,
|
|
range_del_agg_, prefix_extractor_,
|
|
nullptr /* don't need reference to table */,
|
|
file_read_hist_, for_compaction_, nullptr /* arena */, skip_filters_,
|
|
level_, smallest_compaction_key, largest_compaction_key);
|
|
}
|
|
|
|
TableCache* table_cache_;
|
|
const ReadOptions read_options_;
|
|
const EnvOptions& env_options_;
|
|
const InternalKeyComparator& icomparator_;
|
|
const LevelFilesBrief* flevel_;
|
|
mutable FileDescriptor current_value_;
|
|
const SliceTransform* prefix_extractor_;
|
|
|
|
HistogramImpl* file_read_hist_;
|
|
bool should_sample_;
|
|
bool for_compaction_;
|
|
bool skip_filters_;
|
|
size_t file_index_;
|
|
int level_;
|
|
RangeDelAggregator* range_del_agg_;
|
|
IteratorWrapper file_iter_; // May be nullptr
|
|
PinnedIteratorsManager* pinned_iters_mgr_;
|
|
|
|
// To be propagated to RangeDelAggregator in order to safely truncate range
|
|
// tombstones.
|
|
const std::vector<AtomicCompactionUnitBoundary>* compaction_boundaries_;
|
|
};
|
|
|
|
void LevelIterator::Seek(const Slice& target) {
|
|
size_t new_file_index = FindFile(icomparator_, *flevel_, target);
|
|
|
|
InitFileIterator(new_file_index);
|
|
if (file_iter_.iter() != nullptr) {
|
|
file_iter_.Seek(target);
|
|
}
|
|
SkipEmptyFileForward();
|
|
}
|
|
|
|
void LevelIterator::SeekForPrev(const Slice& target) {
|
|
size_t new_file_index = FindFile(icomparator_, *flevel_, target);
|
|
if (new_file_index >= flevel_->num_files) {
|
|
new_file_index = flevel_->num_files - 1;
|
|
}
|
|
|
|
InitFileIterator(new_file_index);
|
|
if (file_iter_.iter() != nullptr) {
|
|
file_iter_.SeekForPrev(target);
|
|
SkipEmptyFileBackward();
|
|
}
|
|
}
|
|
|
|
void LevelIterator::SeekToFirst() {
|
|
InitFileIterator(0);
|
|
if (file_iter_.iter() != nullptr) {
|
|
file_iter_.SeekToFirst();
|
|
}
|
|
SkipEmptyFileForward();
|
|
}
|
|
|
|
void LevelIterator::SeekToLast() {
|
|
InitFileIterator(flevel_->num_files - 1);
|
|
if (file_iter_.iter() != nullptr) {
|
|
file_iter_.SeekToLast();
|
|
}
|
|
SkipEmptyFileBackward();
|
|
}
|
|
|
|
void LevelIterator::Next() {
|
|
assert(Valid());
|
|
file_iter_.Next();
|
|
SkipEmptyFileForward();
|
|
}
|
|
|
|
void LevelIterator::Prev() {
|
|
assert(Valid());
|
|
file_iter_.Prev();
|
|
SkipEmptyFileBackward();
|
|
}
|
|
|
|
void LevelIterator::SkipEmptyFileForward() {
|
|
while (file_iter_.iter() == nullptr ||
|
|
(!file_iter_.Valid() && file_iter_.status().ok() &&
|
|
!file_iter_.iter()->IsOutOfBound())) {
|
|
// Move to next file
|
|
if (file_index_ >= flevel_->num_files - 1) {
|
|
// Already at the last file
|
|
SetFileIterator(nullptr);
|
|
return;
|
|
}
|
|
if (KeyReachedUpperBound(file_smallest_key(file_index_ + 1))) {
|
|
SetFileIterator(nullptr);
|
|
return;
|
|
}
|
|
InitFileIterator(file_index_ + 1);
|
|
if (file_iter_.iter() != nullptr) {
|
|
file_iter_.SeekToFirst();
|
|
}
|
|
}
|
|
}
|
|
|
|
void LevelIterator::SkipEmptyFileBackward() {
|
|
while (file_iter_.iter() == nullptr ||
|
|
(!file_iter_.Valid() && file_iter_.status().ok())) {
|
|
// Move to previous file
|
|
if (file_index_ == 0) {
|
|
// Already the first file
|
|
SetFileIterator(nullptr);
|
|
return;
|
|
}
|
|
InitFileIterator(file_index_ - 1);
|
|
if (file_iter_.iter() != nullptr) {
|
|
file_iter_.SeekToLast();
|
|
}
|
|
}
|
|
}
|
|
|
|
void LevelIterator::SetFileIterator(InternalIterator* iter) {
|
|
if (pinned_iters_mgr_ && iter) {
|
|
iter->SetPinnedItersMgr(pinned_iters_mgr_);
|
|
}
|
|
|
|
InternalIterator* old_iter = file_iter_.Set(iter);
|
|
if (pinned_iters_mgr_ && pinned_iters_mgr_->PinningEnabled()) {
|
|
pinned_iters_mgr_->PinIterator(old_iter);
|
|
} else {
|
|
delete old_iter;
|
|
}
|
|
}
|
|
|
|
void LevelIterator::InitFileIterator(size_t new_file_index) {
|
|
if (new_file_index >= flevel_->num_files) {
|
|
file_index_ = new_file_index;
|
|
SetFileIterator(nullptr);
|
|
return;
|
|
} else {
|
|
// If the file iterator shows incomplete, we try it again if users seek
|
|
// to the same file, as this time we may go to a different data block
|
|
// which is cached in block cache.
|
|
//
|
|
if (file_iter_.iter() != nullptr && !file_iter_.status().IsIncomplete() &&
|
|
new_file_index == file_index_) {
|
|
// file_iter_ is already constructed with this iterator, so
|
|
// no need to change anything
|
|
} else {
|
|
file_index_ = new_file_index;
|
|
InternalIterator* iter = NewFileIterator();
|
|
SetFileIterator(iter);
|
|
}
|
|
}
|
|
}
|
|
|
|
// A wrapper of version builder which references the current version in
|
|
// constructor and unref it in the destructor.
|
|
// Both of the constructor and destructor need to be called inside DB Mutex.
|
|
class BaseReferencedVersionBuilder {
|
|
public:
|
|
explicit BaseReferencedVersionBuilder(ColumnFamilyData* cfd)
|
|
: version_builder_(new VersionBuilder(
|
|
cfd->current()->version_set()->env_options(), cfd->table_cache(),
|
|
cfd->current()->storage_info(), cfd->ioptions()->info_log)),
|
|
version_(cfd->current()) {
|
|
version_->Ref();
|
|
}
|
|
~BaseReferencedVersionBuilder() {
|
|
delete version_builder_;
|
|
version_->Unref();
|
|
}
|
|
VersionBuilder* version_builder() { return version_builder_; }
|
|
|
|
private:
|
|
VersionBuilder* version_builder_;
|
|
Version* version_;
|
|
};
|
|
} // anonymous namespace
|
|
|
|
Status Version::GetTableProperties(std::shared_ptr<const TableProperties>* tp,
|
|
const FileMetaData* file_meta,
|
|
const std::string* fname) const {
|
|
auto table_cache = cfd_->table_cache();
|
|
auto ioptions = cfd_->ioptions();
|
|
Status s = table_cache->GetTableProperties(
|
|
env_options_, cfd_->internal_comparator(), file_meta->fd, tp,
|
|
mutable_cf_options_.prefix_extractor.get(), true /* no io */);
|
|
if (s.ok()) {
|
|
return s;
|
|
}
|
|
|
|
// We only ignore error type `Incomplete` since it's by design that we
|
|
// disallow table when it's not in table cache.
|
|
if (!s.IsIncomplete()) {
|
|
return s;
|
|
}
|
|
|
|
// 2. Table is not present in table cache, we'll read the table properties
|
|
// directly from the properties block in the file.
|
|
std::unique_ptr<RandomAccessFile> file;
|
|
std::string file_name;
|
|
if (fname != nullptr) {
|
|
file_name = *fname;
|
|
} else {
|
|
file_name =
|
|
TableFileName(ioptions->cf_paths, file_meta->fd.GetNumber(),
|
|
file_meta->fd.GetPathId());
|
|
}
|
|
s = ioptions->env->NewRandomAccessFile(file_name, &file, env_options_);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
|
|
TableProperties* raw_table_properties;
|
|
// By setting the magic number to kInvalidTableMagicNumber, we can by
|
|
// pass the magic number check in the footer.
|
|
std::unique_ptr<RandomAccessFileReader> file_reader(
|
|
new RandomAccessFileReader(
|
|
std::move(file), file_name, nullptr /* env */, nullptr /* stats */,
|
|
0 /* hist_type */, nullptr /* file_read_hist */,
|
|
nullptr /* rate_limiter */, false /* for_compaction*/,
|
|
ioptions->listeners));
|
|
s = ReadTableProperties(
|
|
file_reader.get(), file_meta->fd.GetFileSize(),
|
|
Footer::kInvalidTableMagicNumber /* table's magic number */, *ioptions,
|
|
&raw_table_properties, false /* compression_type_missing */);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
RecordTick(ioptions->statistics, NUMBER_DIRECT_LOAD_TABLE_PROPERTIES);
|
|
|
|
*tp = std::shared_ptr<const TableProperties>(raw_table_properties);
|
|
return s;
|
|
}
|
|
|
|
Status Version::GetPropertiesOfAllTables(TablePropertiesCollection* props) {
|
|
Status s;
|
|
for (int level = 0; level < storage_info_.num_levels_; level++) {
|
|
s = GetPropertiesOfAllTables(props, level);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
}
|
|
|
|
return Status::OK();
|
|
}
|
|
|
|
Status Version::GetPropertiesOfAllTables(TablePropertiesCollection* props,
|
|
int level) {
|
|
for (const auto& file_meta : storage_info_.files_[level]) {
|
|
auto fname =
|
|
TableFileName(cfd_->ioptions()->cf_paths, file_meta->fd.GetNumber(),
|
|
file_meta->fd.GetPathId());
|
|
// 1. If the table is already present in table cache, load table
|
|
// properties from there.
|
|
std::shared_ptr<const TableProperties> table_properties;
|
|
Status s = GetTableProperties(&table_properties, file_meta, &fname);
|
|
if (s.ok()) {
|
|
props->insert({fname, table_properties});
|
|
} else {
|
|
return s;
|
|
}
|
|
}
|
|
|
|
return Status::OK();
|
|
}
|
|
|
|
Status Version::GetPropertiesOfTablesInRange(
|
|
const Range* range, std::size_t n, TablePropertiesCollection* props) const {
|
|
for (int level = 0; level < storage_info_.num_non_empty_levels(); level++) {
|
|
for (decltype(n) i = 0; i < n; i++) {
|
|
// Convert user_key into a corresponding internal key.
|
|
InternalKey k1(range[i].start, kMaxSequenceNumber, kValueTypeForSeek);
|
|
InternalKey k2(range[i].limit, kMaxSequenceNumber, kValueTypeForSeek);
|
|
std::vector<FileMetaData*> files;
|
|
storage_info_.GetOverlappingInputs(level, &k1, &k2, &files, -1, nullptr,
|
|
false);
|
|
for (const auto& file_meta : files) {
|
|
auto fname =
|
|
TableFileName(cfd_->ioptions()->cf_paths,
|
|
file_meta->fd.GetNumber(), file_meta->fd.GetPathId());
|
|
if (props->count(fname) == 0) {
|
|
// 1. If the table is already present in table cache, load table
|
|
// properties from there.
|
|
std::shared_ptr<const TableProperties> table_properties;
|
|
Status s = GetTableProperties(&table_properties, file_meta, &fname);
|
|
if (s.ok()) {
|
|
props->insert({fname, table_properties});
|
|
} else {
|
|
return s;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
return Status::OK();
|
|
}
|
|
|
|
Status Version::GetAggregatedTableProperties(
|
|
std::shared_ptr<const TableProperties>* tp, int level) {
|
|
TablePropertiesCollection props;
|
|
Status s;
|
|
if (level < 0) {
|
|
s = GetPropertiesOfAllTables(&props);
|
|
} else {
|
|
s = GetPropertiesOfAllTables(&props, level);
|
|
}
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
|
|
auto* new_tp = new TableProperties();
|
|
for (const auto& item : props) {
|
|
new_tp->Add(*item.second);
|
|
}
|
|
tp->reset(new_tp);
|
|
return Status::OK();
|
|
}
|
|
|
|
size_t Version::GetMemoryUsageByTableReaders() {
|
|
size_t total_usage = 0;
|
|
for (auto& file_level : storage_info_.level_files_brief_) {
|
|
for (size_t i = 0; i < file_level.num_files; i++) {
|
|
total_usage += cfd_->table_cache()->GetMemoryUsageByTableReader(
|
|
env_options_, cfd_->internal_comparator(), file_level.files[i].fd,
|
|
mutable_cf_options_.prefix_extractor.get());
|
|
}
|
|
}
|
|
return total_usage;
|
|
}
|
|
|
|
void Version::GetColumnFamilyMetaData(ColumnFamilyMetaData* cf_meta) {
|
|
assert(cf_meta);
|
|
assert(cfd_);
|
|
|
|
cf_meta->name = cfd_->GetName();
|
|
cf_meta->size = 0;
|
|
cf_meta->file_count = 0;
|
|
cf_meta->levels.clear();
|
|
|
|
auto* ioptions = cfd_->ioptions();
|
|
auto* vstorage = storage_info();
|
|
|
|
for (int level = 0; level < cfd_->NumberLevels(); level++) {
|
|
uint64_t level_size = 0;
|
|
cf_meta->file_count += vstorage->LevelFiles(level).size();
|
|
std::vector<SstFileMetaData> files;
|
|
for (const auto& file : vstorage->LevelFiles(level)) {
|
|
uint32_t path_id = file->fd.GetPathId();
|
|
std::string file_path;
|
|
if (path_id < ioptions->cf_paths.size()) {
|
|
file_path = ioptions->cf_paths[path_id].path;
|
|
} else {
|
|
assert(!ioptions->cf_paths.empty());
|
|
file_path = ioptions->cf_paths.back().path;
|
|
}
|
|
files.emplace_back(SstFileMetaData{
|
|
MakeTableFileName("", file->fd.GetNumber()),
|
|
file_path,
|
|
static_cast<size_t>(file->fd.GetFileSize()),
|
|
file->fd.smallest_seqno,
|
|
file->fd.largest_seqno,
|
|
file->smallest.user_key().ToString(),
|
|
file->largest.user_key().ToString(),
|
|
file->stats.num_reads_sampled.load(std::memory_order_relaxed),
|
|
file->being_compacted});
|
|
level_size += file->fd.GetFileSize();
|
|
}
|
|
cf_meta->levels.emplace_back(
|
|
level, level_size, std::move(files));
|
|
cf_meta->size += level_size;
|
|
}
|
|
}
|
|
|
|
uint64_t Version::GetSstFilesSize() {
|
|
uint64_t sst_files_size = 0;
|
|
for (int level = 0; level < storage_info_.num_levels_; level++) {
|
|
for (const auto& file_meta : storage_info_.LevelFiles(level)) {
|
|
sst_files_size += file_meta->fd.GetFileSize();
|
|
}
|
|
}
|
|
return sst_files_size;
|
|
}
|
|
|
|
uint64_t VersionStorageInfo::GetEstimatedActiveKeys() const {
|
|
// Estimation will be inaccurate when:
|
|
// (1) there exist merge keys
|
|
// (2) keys are directly overwritten
|
|
// (3) deletion on non-existing keys
|
|
// (4) low number of samples
|
|
if (current_num_samples_ == 0) {
|
|
return 0;
|
|
}
|
|
|
|
if (current_num_non_deletions_ <= current_num_deletions_) {
|
|
return 0;
|
|
}
|
|
|
|
uint64_t est = current_num_non_deletions_ - current_num_deletions_;
|
|
|
|
uint64_t file_count = 0;
|
|
for (int level = 0; level < num_levels_; ++level) {
|
|
file_count += files_[level].size();
|
|
}
|
|
|
|
if (current_num_samples_ < file_count) {
|
|
// casting to avoid overflowing
|
|
return
|
|
static_cast<uint64_t>(
|
|
(est * static_cast<double>(file_count) / current_num_samples_)
|
|
);
|
|
} else {
|
|
return est;
|
|
}
|
|
}
|
|
|
|
double VersionStorageInfo::GetEstimatedCompressionRatioAtLevel(
|
|
int level) const {
|
|
assert(level < num_levels_);
|
|
uint64_t sum_file_size_bytes = 0;
|
|
uint64_t sum_data_size_bytes = 0;
|
|
for (auto* file_meta : files_[level]) {
|
|
sum_file_size_bytes += file_meta->fd.GetFileSize();
|
|
sum_data_size_bytes += file_meta->raw_key_size + file_meta->raw_value_size;
|
|
}
|
|
if (sum_file_size_bytes == 0) {
|
|
return -1.0;
|
|
}
|
|
return static_cast<double>(sum_data_size_bytes) / sum_file_size_bytes;
|
|
}
|
|
|
|
void Version::AddIterators(const ReadOptions& read_options,
|
|
const EnvOptions& soptions,
|
|
MergeIteratorBuilder* merge_iter_builder,
|
|
RangeDelAggregator* range_del_agg) {
|
|
assert(storage_info_.finalized_);
|
|
|
|
for (int level = 0; level < storage_info_.num_non_empty_levels(); level++) {
|
|
AddIteratorsForLevel(read_options, soptions, merge_iter_builder, level,
|
|
range_del_agg);
|
|
}
|
|
}
|
|
|
|
void Version::AddIteratorsForLevel(const ReadOptions& read_options,
|
|
const EnvOptions& soptions,
|
|
MergeIteratorBuilder* merge_iter_builder,
|
|
int level,
|
|
RangeDelAggregator* range_del_agg) {
|
|
assert(storage_info_.finalized_);
|
|
if (level >= storage_info_.num_non_empty_levels()) {
|
|
// This is an empty level
|
|
return;
|
|
} else if (storage_info_.LevelFilesBrief(level).num_files == 0) {
|
|
// No files in this level
|
|
return;
|
|
}
|
|
|
|
bool should_sample = should_sample_file_read();
|
|
|
|
auto* arena = merge_iter_builder->GetArena();
|
|
if (level == 0) {
|
|
// Merge all level zero files together since they may overlap
|
|
for (size_t i = 0; i < storage_info_.LevelFilesBrief(0).num_files; i++) {
|
|
const auto& file = storage_info_.LevelFilesBrief(0).files[i];
|
|
merge_iter_builder->AddIterator(cfd_->table_cache()->NewIterator(
|
|
read_options, soptions, cfd_->internal_comparator(), *file.file_metadata,
|
|
range_del_agg, mutable_cf_options_.prefix_extractor.get(), nullptr,
|
|
cfd_->internal_stats()->GetFileReadHist(0), false, arena,
|
|
false /* skip_filters */, 0 /* level */));
|
|
}
|
|
if (should_sample) {
|
|
// Count ones for every L0 files. This is done per iterator creation
|
|
// rather than Seek(), while files in other levels are recored per seek.
|
|
// If users execute one range query per iterator, there may be some
|
|
// discrepancy here.
|
|
for (FileMetaData* meta : storage_info_.LevelFiles(0)) {
|
|
sample_file_read_inc(meta);
|
|
}
|
|
}
|
|
} else if (storage_info_.LevelFilesBrief(level).num_files > 0) {
|
|
// For levels > 0, we can use a concatenating iterator that sequentially
|
|
// walks through the non-overlapping files in the level, opening them
|
|
// lazily.
|
|
auto* mem = arena->AllocateAligned(sizeof(LevelIterator));
|
|
merge_iter_builder->AddIterator(new (mem) LevelIterator(
|
|
cfd_->table_cache(), read_options, soptions,
|
|
cfd_->internal_comparator(), &storage_info_.LevelFilesBrief(level),
|
|
mutable_cf_options_.prefix_extractor.get(), should_sample_file_read(),
|
|
cfd_->internal_stats()->GetFileReadHist(level),
|
|
false /* for_compaction */, IsFilterSkipped(level), level,
|
|
range_del_agg));
|
|
}
|
|
}
|
|
|
|
Status Version::OverlapWithLevelIterator(const ReadOptions& read_options,
|
|
const EnvOptions& env_options,
|
|
const Slice& smallest_user_key,
|
|
const Slice& largest_user_key,
|
|
int level, bool* overlap) {
|
|
assert(storage_info_.finalized_);
|
|
|
|
auto icmp = cfd_->internal_comparator();
|
|
auto ucmp = icmp.user_comparator();
|
|
|
|
Arena arena;
|
|
Status status;
|
|
RangeDelAggregator range_del_agg(icmp, {}, false);
|
|
|
|
*overlap = false;
|
|
|
|
if (level == 0) {
|
|
for (size_t i = 0; i < storage_info_.LevelFilesBrief(0).num_files; i++) {
|
|
const auto file = &storage_info_.LevelFilesBrief(0).files[i];
|
|
if (AfterFile(ucmp, &smallest_user_key, file) ||
|
|
BeforeFile(ucmp, &largest_user_key, file)) {
|
|
continue;
|
|
}
|
|
ScopedArenaIterator iter(cfd_->table_cache()->NewIterator(
|
|
read_options, env_options, cfd_->internal_comparator(), *file->file_metadata,
|
|
&range_del_agg, mutable_cf_options_.prefix_extractor.get(), nullptr,
|
|
cfd_->internal_stats()->GetFileReadHist(0), false, &arena,
|
|
false /* skip_filters */, 0 /* level */));
|
|
status = OverlapWithIterator(
|
|
ucmp, smallest_user_key, largest_user_key, iter.get(), overlap);
|
|
if (!status.ok() || *overlap) {
|
|
break;
|
|
}
|
|
}
|
|
} else if (storage_info_.LevelFilesBrief(level).num_files > 0) {
|
|
auto mem = arena.AllocateAligned(sizeof(LevelIterator));
|
|
ScopedArenaIterator iter(new (mem) LevelIterator(
|
|
cfd_->table_cache(), read_options, env_options,
|
|
cfd_->internal_comparator(), &storage_info_.LevelFilesBrief(level),
|
|
mutable_cf_options_.prefix_extractor.get(), should_sample_file_read(),
|
|
cfd_->internal_stats()->GetFileReadHist(level),
|
|
false /* for_compaction */, IsFilterSkipped(level), level,
|
|
&range_del_agg));
|
|
status = OverlapWithIterator(
|
|
ucmp, smallest_user_key, largest_user_key, iter.get(), overlap);
|
|
}
|
|
|
|
if (status.ok() && *overlap == false &&
|
|
range_del_agg.IsRangeOverlapped(smallest_user_key, largest_user_key)) {
|
|
*overlap = true;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
VersionStorageInfo::VersionStorageInfo(
|
|
const InternalKeyComparator* internal_comparator,
|
|
const Comparator* user_comparator, int levels,
|
|
CompactionStyle compaction_style, VersionStorageInfo* ref_vstorage,
|
|
bool _force_consistency_checks)
|
|
: internal_comparator_(internal_comparator),
|
|
user_comparator_(user_comparator),
|
|
// cfd is nullptr if Version is dummy
|
|
num_levels_(levels),
|
|
num_non_empty_levels_(0),
|
|
file_indexer_(user_comparator),
|
|
compaction_style_(compaction_style),
|
|
files_(new std::vector<FileMetaData*>[num_levels_]),
|
|
base_level_(num_levels_ == 1 ? -1 : 1),
|
|
level_multiplier_(0.0),
|
|
files_by_compaction_pri_(num_levels_),
|
|
level0_non_overlapping_(false),
|
|
next_file_to_compact_by_size_(num_levels_),
|
|
compaction_score_(num_levels_),
|
|
compaction_level_(num_levels_),
|
|
l0_delay_trigger_count_(0),
|
|
accumulated_file_size_(0),
|
|
accumulated_raw_key_size_(0),
|
|
accumulated_raw_value_size_(0),
|
|
accumulated_num_non_deletions_(0),
|
|
accumulated_num_deletions_(0),
|
|
current_num_non_deletions_(0),
|
|
current_num_deletions_(0),
|
|
current_num_samples_(0),
|
|
estimated_compaction_needed_bytes_(0),
|
|
finalized_(false),
|
|
force_consistency_checks_(_force_consistency_checks) {
|
|
if (ref_vstorage != nullptr) {
|
|
accumulated_file_size_ = ref_vstorage->accumulated_file_size_;
|
|
accumulated_raw_key_size_ = ref_vstorage->accumulated_raw_key_size_;
|
|
accumulated_raw_value_size_ = ref_vstorage->accumulated_raw_value_size_;
|
|
accumulated_num_non_deletions_ =
|
|
ref_vstorage->accumulated_num_non_deletions_;
|
|
accumulated_num_deletions_ = ref_vstorage->accumulated_num_deletions_;
|
|
current_num_non_deletions_ = ref_vstorage->current_num_non_deletions_;
|
|
current_num_deletions_ = ref_vstorage->current_num_deletions_;
|
|
current_num_samples_ = ref_vstorage->current_num_samples_;
|
|
oldest_snapshot_seqnum_ = ref_vstorage->oldest_snapshot_seqnum_;
|
|
}
|
|
}
|
|
|
|
Version::Version(ColumnFamilyData* column_family_data, VersionSet* vset,
|
|
const EnvOptions& env_opt,
|
|
const MutableCFOptions mutable_cf_options,
|
|
uint64_t version_number)
|
|
: env_(vset->env_),
|
|
cfd_(column_family_data),
|
|
info_log_((cfd_ == nullptr) ? nullptr : cfd_->ioptions()->info_log),
|
|
db_statistics_((cfd_ == nullptr) ? nullptr
|
|
: cfd_->ioptions()->statistics),
|
|
table_cache_((cfd_ == nullptr) ? nullptr : cfd_->table_cache()),
|
|
merge_operator_((cfd_ == nullptr) ? nullptr
|
|
: cfd_->ioptions()->merge_operator),
|
|
storage_info_(
|
|
(cfd_ == nullptr) ? nullptr : &cfd_->internal_comparator(),
|
|
(cfd_ == nullptr) ? nullptr : cfd_->user_comparator(),
|
|
cfd_ == nullptr ? 0 : cfd_->NumberLevels(),
|
|
cfd_ == nullptr ? kCompactionStyleLevel
|
|
: cfd_->ioptions()->compaction_style,
|
|
(cfd_ == nullptr || cfd_->current() == nullptr)
|
|
? nullptr
|
|
: cfd_->current()->storage_info(),
|
|
cfd_ == nullptr ? false : cfd_->ioptions()->force_consistency_checks),
|
|
vset_(vset),
|
|
next_(this),
|
|
prev_(this),
|
|
refs_(0),
|
|
env_options_(env_opt),
|
|
mutable_cf_options_(mutable_cf_options),
|
|
version_number_(version_number) {}
|
|
|
|
void Version::Get(const ReadOptions& read_options, const LookupKey& k,
|
|
PinnableSlice* value, Status* status,
|
|
MergeContext* merge_context,
|
|
SequenceNumber* max_covering_tombstone_seq, bool* value_found,
|
|
bool* key_exists, SequenceNumber* seq, ReadCallback* callback,
|
|
bool* is_blob) {
|
|
Slice ikey = k.internal_key();
|
|
Slice user_key = k.user_key();
|
|
|
|
assert(status->ok() || status->IsMergeInProgress());
|
|
|
|
if (key_exists != nullptr) {
|
|
// will falsify below if not found
|
|
*key_exists = true;
|
|
}
|
|
|
|
PinnedIteratorsManager pinned_iters_mgr;
|
|
GetContext get_context(
|
|
user_comparator(), merge_operator_, info_log_, db_statistics_,
|
|
status->ok() ? GetContext::kNotFound : GetContext::kMerge, user_key,
|
|
value, value_found, merge_context, max_covering_tombstone_seq, this->env_,
|
|
seq, merge_operator_ ? &pinned_iters_mgr : nullptr, callback, is_blob);
|
|
|
|
// Pin blocks that we read to hold merge operands
|
|
if (merge_operator_) {
|
|
pinned_iters_mgr.StartPinning();
|
|
}
|
|
|
|
FilePicker fp(
|
|
storage_info_.files_, user_key, ikey, &storage_info_.level_files_brief_,
|
|
storage_info_.num_non_empty_levels_, &storage_info_.file_indexer_,
|
|
user_comparator(), internal_comparator());
|
|
FdWithKeyRange* f = fp.GetNextFile();
|
|
|
|
while (f != nullptr) {
|
|
if (*max_covering_tombstone_seq > 0) {
|
|
// Use empty error message for speed
|
|
*status = Status::NotFound();
|
|
return;
|
|
}
|
|
if (get_context.sample()) {
|
|
sample_file_read_inc(f->file_metadata);
|
|
}
|
|
|
|
*status = table_cache_->Get(
|
|
read_options, *internal_comparator(), *f->file_metadata, ikey,
|
|
&get_context, mutable_cf_options_.prefix_extractor.get(),
|
|
cfd_->internal_stats()->GetFileReadHist(fp.GetHitFileLevel()),
|
|
IsFilterSkipped(static_cast<int>(fp.GetHitFileLevel()),
|
|
fp.IsHitFileLastInLevel()),
|
|
fp.GetCurrentLevel());
|
|
// TODO: examine the behavior for corrupted key
|
|
if (!status->ok()) {
|
|
return;
|
|
}
|
|
|
|
// report the counters before returning
|
|
if (get_context.State() != GetContext::kNotFound &&
|
|
get_context.State() != GetContext::kMerge &&
|
|
db_statistics_ != nullptr) {
|
|
get_context.ReportCounters();
|
|
}
|
|
switch (get_context.State()) {
|
|
case GetContext::kNotFound:
|
|
// Keep searching in other files
|
|
break;
|
|
case GetContext::kMerge:
|
|
break;
|
|
case GetContext::kFound:
|
|
if (fp.GetHitFileLevel() == 0) {
|
|
RecordTick(db_statistics_, GET_HIT_L0);
|
|
} else if (fp.GetHitFileLevel() == 1) {
|
|
RecordTick(db_statistics_, GET_HIT_L1);
|
|
} else if (fp.GetHitFileLevel() >= 2) {
|
|
RecordTick(db_statistics_, GET_HIT_L2_AND_UP);
|
|
}
|
|
return;
|
|
case GetContext::kDeleted:
|
|
// Use empty error message for speed
|
|
*status = Status::NotFound();
|
|
return;
|
|
case GetContext::kCorrupt:
|
|
*status = Status::Corruption("corrupted key for ", user_key);
|
|
return;
|
|
case GetContext::kBlobIndex:
|
|
ROCKS_LOG_ERROR(info_log_, "Encounter unexpected blob index.");
|
|
*status = Status::NotSupported(
|
|
"Encounter unexpected blob index. Please open DB with "
|
|
"rocksdb::blob_db::BlobDB instead.");
|
|
return;
|
|
}
|
|
f = fp.GetNextFile();
|
|
}
|
|
|
|
if (db_statistics_ != nullptr) {
|
|
get_context.ReportCounters();
|
|
}
|
|
if (GetContext::kMerge == get_context.State()) {
|
|
if (!merge_operator_) {
|
|
*status = Status::InvalidArgument(
|
|
"merge_operator is not properly initialized.");
|
|
return;
|
|
}
|
|
// merge_operands are in saver and we hit the beginning of the key history
|
|
// do a final merge of nullptr and operands;
|
|
std::string* str_value = value != nullptr ? value->GetSelf() : nullptr;
|
|
*status = MergeHelper::TimedFullMerge(
|
|
merge_operator_, user_key, nullptr, merge_context->GetOperands(),
|
|
str_value, info_log_, db_statistics_, env_,
|
|
nullptr /* result_operand */, true);
|
|
if (LIKELY(value != nullptr)) {
|
|
value->PinSelf();
|
|
}
|
|
} else {
|
|
if (key_exists != nullptr) {
|
|
*key_exists = false;
|
|
}
|
|
*status = Status::NotFound(); // Use an empty error message for speed
|
|
}
|
|
}
|
|
|
|
bool Version::IsFilterSkipped(int level, bool is_file_last_in_level) {
|
|
// Reaching the bottom level implies misses at all upper levels, so we'll
|
|
// skip checking the filters when we predict a hit.
|
|
return cfd_->ioptions()->optimize_filters_for_hits &&
|
|
(level > 0 || is_file_last_in_level) &&
|
|
level == storage_info_.num_non_empty_levels() - 1;
|
|
}
|
|
|
|
void VersionStorageInfo::GenerateLevelFilesBrief() {
|
|
level_files_brief_.resize(num_non_empty_levels_);
|
|
for (int level = 0; level < num_non_empty_levels_; level++) {
|
|
DoGenerateLevelFilesBrief(
|
|
&level_files_brief_[level], files_[level], &arena_);
|
|
}
|
|
}
|
|
|
|
void Version::PrepareApply(
|
|
const MutableCFOptions& mutable_cf_options,
|
|
bool update_stats) {
|
|
UpdateAccumulatedStats(update_stats);
|
|
storage_info_.UpdateNumNonEmptyLevels();
|
|
storage_info_.CalculateBaseBytes(*cfd_->ioptions(), mutable_cf_options);
|
|
storage_info_.UpdateFilesByCompactionPri(cfd_->ioptions()->compaction_pri);
|
|
storage_info_.GenerateFileIndexer();
|
|
storage_info_.GenerateLevelFilesBrief();
|
|
storage_info_.GenerateLevel0NonOverlapping();
|
|
storage_info_.GenerateBottommostFiles();
|
|
}
|
|
|
|
bool Version::MaybeInitializeFileMetaData(FileMetaData* file_meta) {
|
|
if (file_meta->init_stats_from_file ||
|
|
file_meta->compensated_file_size > 0) {
|
|
return false;
|
|
}
|
|
std::shared_ptr<const TableProperties> tp;
|
|
Status s = GetTableProperties(&tp, file_meta);
|
|
file_meta->init_stats_from_file = true;
|
|
if (!s.ok()) {
|
|
ROCKS_LOG_ERROR(vset_->db_options_->info_log,
|
|
"Unable to load table properties for file %" PRIu64
|
|
" --- %s\n",
|
|
file_meta->fd.GetNumber(), s.ToString().c_str());
|
|
return false;
|
|
}
|
|
if (tp.get() == nullptr) return false;
|
|
file_meta->num_entries = tp->num_entries;
|
|
file_meta->num_deletions = GetDeletedKeys(tp->user_collected_properties);
|
|
file_meta->raw_value_size = tp->raw_value_size;
|
|
file_meta->raw_key_size = tp->raw_key_size;
|
|
|
|
return true;
|
|
}
|
|
|
|
void VersionStorageInfo::UpdateAccumulatedStats(FileMetaData* file_meta) {
|
|
assert(file_meta->init_stats_from_file);
|
|
accumulated_file_size_ += file_meta->fd.GetFileSize();
|
|
accumulated_raw_key_size_ += file_meta->raw_key_size;
|
|
accumulated_raw_value_size_ += file_meta->raw_value_size;
|
|
accumulated_num_non_deletions_ +=
|
|
file_meta->num_entries - file_meta->num_deletions;
|
|
accumulated_num_deletions_ += file_meta->num_deletions;
|
|
|
|
current_num_non_deletions_ +=
|
|
file_meta->num_entries - file_meta->num_deletions;
|
|
current_num_deletions_ += file_meta->num_deletions;
|
|
current_num_samples_++;
|
|
}
|
|
|
|
void VersionStorageInfo::RemoveCurrentStats(FileMetaData* file_meta) {
|
|
if (file_meta->init_stats_from_file) {
|
|
current_num_non_deletions_ -=
|
|
file_meta->num_entries - file_meta->num_deletions;
|
|
current_num_deletions_ -= file_meta->num_deletions;
|
|
current_num_samples_--;
|
|
}
|
|
}
|
|
|
|
void Version::UpdateAccumulatedStats(bool update_stats) {
|
|
if (update_stats) {
|
|
// maximum number of table properties loaded from files.
|
|
const int kMaxInitCount = 20;
|
|
int init_count = 0;
|
|
// here only the first kMaxInitCount files which haven't been
|
|
// initialized from file will be updated with num_deletions.
|
|
// The motivation here is to cap the maximum I/O per Version creation.
|
|
// The reason for choosing files from lower-level instead of higher-level
|
|
// is that such design is able to propagate the initialization from
|
|
// lower-level to higher-level: When the num_deletions of lower-level
|
|
// files are updated, it will make the lower-level files have accurate
|
|
// compensated_file_size, making lower-level to higher-level compaction
|
|
// will be triggered, which creates higher-level files whose num_deletions
|
|
// will be updated here.
|
|
for (int level = 0;
|
|
level < storage_info_.num_levels_ && init_count < kMaxInitCount;
|
|
++level) {
|
|
for (auto* file_meta : storage_info_.files_[level]) {
|
|
if (MaybeInitializeFileMetaData(file_meta)) {
|
|
// each FileMeta will be initialized only once.
|
|
storage_info_.UpdateAccumulatedStats(file_meta);
|
|
// when option "max_open_files" is -1, all the file metadata has
|
|
// already been read, so MaybeInitializeFileMetaData() won't incur
|
|
// any I/O cost. "max_open_files=-1" means that the table cache passed
|
|
// to the VersionSet and then to the ColumnFamilySet has a size of
|
|
// TableCache::kInfiniteCapacity
|
|
if (vset_->GetColumnFamilySet()->get_table_cache()->GetCapacity() ==
|
|
TableCache::kInfiniteCapacity) {
|
|
continue;
|
|
}
|
|
if (++init_count >= kMaxInitCount) {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
// In case all sampled-files contain only deletion entries, then we
|
|
// load the table-property of a file in higher-level to initialize
|
|
// that value.
|
|
for (int level = storage_info_.num_levels_ - 1;
|
|
storage_info_.accumulated_raw_value_size_ == 0 && level >= 0;
|
|
--level) {
|
|
for (int i = static_cast<int>(storage_info_.files_[level].size()) - 1;
|
|
storage_info_.accumulated_raw_value_size_ == 0 && i >= 0; --i) {
|
|
if (MaybeInitializeFileMetaData(storage_info_.files_[level][i])) {
|
|
storage_info_.UpdateAccumulatedStats(storage_info_.files_[level][i]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
storage_info_.ComputeCompensatedSizes();
|
|
}
|
|
|
|
void VersionStorageInfo::ComputeCompensatedSizes() {
|
|
static const int kDeletionWeightOnCompaction = 2;
|
|
uint64_t average_value_size = GetAverageValueSize();
|
|
|
|
// compute the compensated size
|
|
for (int level = 0; level < num_levels_; level++) {
|
|
for (auto* file_meta : files_[level]) {
|
|
// Here we only compute compensated_file_size for those file_meta
|
|
// which compensated_file_size is uninitialized (== 0). This is true only
|
|
// for files that have been created right now and no other thread has
|
|
// access to them. That's why we can safely mutate compensated_file_size.
|
|
if (file_meta->compensated_file_size == 0) {
|
|
file_meta->compensated_file_size = file_meta->fd.GetFileSize();
|
|
// Here we only boost the size of deletion entries of a file only
|
|
// when the number of deletion entries is greater than the number of
|
|
// non-deletion entries in the file. The motivation here is that in
|
|
// a stable workload, the number of deletion entries should be roughly
|
|
// equal to the number of non-deletion entries. If we compensate the
|
|
// size of deletion entries in a stable workload, the deletion
|
|
// compensation logic might introduce unwanted effet which changes the
|
|
// shape of LSM tree.
|
|
if (file_meta->num_deletions * 2 >= file_meta->num_entries) {
|
|
file_meta->compensated_file_size +=
|
|
(file_meta->num_deletions * 2 - file_meta->num_entries) *
|
|
average_value_size * kDeletionWeightOnCompaction;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
int VersionStorageInfo::MaxInputLevel() const {
|
|
if (compaction_style_ == kCompactionStyleLevel) {
|
|
return num_levels() - 2;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int VersionStorageInfo::MaxOutputLevel(bool allow_ingest_behind) const {
|
|
if (allow_ingest_behind) {
|
|
assert(num_levels() > 1);
|
|
return num_levels() - 2;
|
|
}
|
|
return num_levels() - 1;
|
|
}
|
|
|
|
void VersionStorageInfo::EstimateCompactionBytesNeeded(
|
|
const MutableCFOptions& mutable_cf_options) {
|
|
// Only implemented for level-based compaction
|
|
if (compaction_style_ != kCompactionStyleLevel) {
|
|
estimated_compaction_needed_bytes_ = 0;
|
|
return;
|
|
}
|
|
|
|
// Start from Level 0, if level 0 qualifies compaction to level 1,
|
|
// we estimate the size of compaction.
|
|
// Then we move on to the next level and see whether it qualifies compaction
|
|
// to the next level. The size of the level is estimated as the actual size
|
|
// on the level plus the input bytes from the previous level if there is any.
|
|
// If it exceeds, take the exceeded bytes as compaction input and add the size
|
|
// of the compaction size to tatal size.
|
|
// We keep doing it to Level 2, 3, etc, until the last level and return the
|
|
// accumulated bytes.
|
|
|
|
uint64_t bytes_compact_to_next_level = 0;
|
|
uint64_t level_size = 0;
|
|
for (auto* f : files_[0]) {
|
|
level_size += f->fd.GetFileSize();
|
|
}
|
|
// Level 0
|
|
bool level0_compact_triggered = false;
|
|
if (static_cast<int>(files_[0].size()) >=
|
|
mutable_cf_options.level0_file_num_compaction_trigger ||
|
|
level_size >= mutable_cf_options.max_bytes_for_level_base) {
|
|
level0_compact_triggered = true;
|
|
estimated_compaction_needed_bytes_ = level_size;
|
|
bytes_compact_to_next_level = level_size;
|
|
} else {
|
|
estimated_compaction_needed_bytes_ = 0;
|
|
}
|
|
|
|
// Level 1 and up.
|
|
uint64_t bytes_next_level = 0;
|
|
for (int level = base_level(); level <= MaxInputLevel(); level++) {
|
|
level_size = 0;
|
|
if (bytes_next_level > 0) {
|
|
#ifndef NDEBUG
|
|
uint64_t level_size2 = 0;
|
|
for (auto* f : files_[level]) {
|
|
level_size2 += f->fd.GetFileSize();
|
|
}
|
|
assert(level_size2 == bytes_next_level);
|
|
#endif
|
|
level_size = bytes_next_level;
|
|
bytes_next_level = 0;
|
|
} else {
|
|
for (auto* f : files_[level]) {
|
|
level_size += f->fd.GetFileSize();
|
|
}
|
|
}
|
|
if (level == base_level() && level0_compact_triggered) {
|
|
// Add base level size to compaction if level0 compaction triggered.
|
|
estimated_compaction_needed_bytes_ += level_size;
|
|
}
|
|
// Add size added by previous compaction
|
|
level_size += bytes_compact_to_next_level;
|
|
bytes_compact_to_next_level = 0;
|
|
uint64_t level_target = MaxBytesForLevel(level);
|
|
if (level_size > level_target) {
|
|
bytes_compact_to_next_level = level_size - level_target;
|
|
// Estimate the actual compaction fan-out ratio as size ratio between
|
|
// the two levels.
|
|
|
|
assert(bytes_next_level == 0);
|
|
if (level + 1 < num_levels_) {
|
|
for (auto* f : files_[level + 1]) {
|
|
bytes_next_level += f->fd.GetFileSize();
|
|
}
|
|
}
|
|
if (bytes_next_level > 0) {
|
|
assert(level_size > 0);
|
|
estimated_compaction_needed_bytes_ += static_cast<uint64_t>(
|
|
static_cast<double>(bytes_compact_to_next_level) *
|
|
(static_cast<double>(bytes_next_level) /
|
|
static_cast<double>(level_size) +
|
|
1));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
namespace {
|
|
uint32_t GetExpiredTtlFilesCount(const ImmutableCFOptions& ioptions,
|
|
const MutableCFOptions& mutable_cf_options,
|
|
const std::vector<FileMetaData*>& files) {
|
|
uint32_t ttl_expired_files_count = 0;
|
|
|
|
int64_t _current_time;
|
|
auto status = ioptions.env->GetCurrentTime(&_current_time);
|
|
if (status.ok()) {
|
|
const uint64_t current_time = static_cast<uint64_t>(_current_time);
|
|
for (auto f : files) {
|
|
if (!f->being_compacted && f->fd.table_reader != nullptr &&
|
|
f->fd.table_reader->GetTableProperties() != nullptr) {
|
|
auto creation_time =
|
|
f->fd.table_reader->GetTableProperties()->creation_time;
|
|
if (creation_time > 0 &&
|
|
creation_time < (current_time -
|
|
mutable_cf_options.compaction_options_fifo.ttl)) {
|
|
ttl_expired_files_count++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return ttl_expired_files_count;
|
|
}
|
|
} // anonymous namespace
|
|
|
|
void VersionStorageInfo::ComputeCompactionScore(
|
|
const ImmutableCFOptions& immutable_cf_options,
|
|
const MutableCFOptions& mutable_cf_options) {
|
|
for (int level = 0; level <= MaxInputLevel(); level++) {
|
|
double score;
|
|
if (level == 0) {
|
|
// We treat level-0 specially by bounding the number of files
|
|
// instead of number of bytes for two reasons:
|
|
//
|
|
// (1) With larger write-buffer sizes, it is nice not to do too
|
|
// many level-0 compactions.
|
|
//
|
|
// (2) The files in level-0 are merged on every read and
|
|
// therefore we wish to avoid too many files when the individual
|
|
// file size is small (perhaps because of a small write-buffer
|
|
// setting, or very high compression ratios, or lots of
|
|
// overwrites/deletions).
|
|
int num_sorted_runs = 0;
|
|
uint64_t total_size = 0;
|
|
for (auto* f : files_[level]) {
|
|
if (!f->being_compacted) {
|
|
total_size += f->compensated_file_size;
|
|
num_sorted_runs++;
|
|
}
|
|
}
|
|
if (compaction_style_ == kCompactionStyleUniversal) {
|
|
// For universal compaction, we use level0 score to indicate
|
|
// compaction score for the whole DB. Adding other levels as if
|
|
// they are L0 files.
|
|
for (int i = 1; i < num_levels(); i++) {
|
|
if (!files_[i].empty() && !files_[i][0]->being_compacted) {
|
|
num_sorted_runs++;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (compaction_style_ == kCompactionStyleFIFO) {
|
|
score = static_cast<double>(total_size) /
|
|
mutable_cf_options.compaction_options_fifo.max_table_files_size;
|
|
if (mutable_cf_options.compaction_options_fifo.allow_compaction) {
|
|
score = std::max(
|
|
static_cast<double>(num_sorted_runs) /
|
|
mutable_cf_options.level0_file_num_compaction_trigger,
|
|
score);
|
|
}
|
|
if (mutable_cf_options.compaction_options_fifo.ttl > 0) {
|
|
score = std::max(
|
|
static_cast<double>(GetExpiredTtlFilesCount(
|
|
immutable_cf_options, mutable_cf_options, files_[level])),
|
|
score);
|
|
}
|
|
|
|
} else {
|
|
score = static_cast<double>(num_sorted_runs) /
|
|
mutable_cf_options.level0_file_num_compaction_trigger;
|
|
if (compaction_style_ == kCompactionStyleLevel && num_levels() > 1) {
|
|
// Level-based involves L0->L0 compactions that can lead to oversized
|
|
// L0 files. Take into account size as well to avoid later giant
|
|
// compactions to the base level.
|
|
score = std::max(
|
|
score, static_cast<double>(total_size) /
|
|
mutable_cf_options.max_bytes_for_level_base);
|
|
}
|
|
}
|
|
} else {
|
|
// Compute the ratio of current size to size limit.
|
|
uint64_t level_bytes_no_compacting = 0;
|
|
for (auto f : files_[level]) {
|
|
if (!f->being_compacted) {
|
|
level_bytes_no_compacting += f->compensated_file_size;
|
|
}
|
|
}
|
|
score = static_cast<double>(level_bytes_no_compacting) /
|
|
MaxBytesForLevel(level);
|
|
}
|
|
compaction_level_[level] = level;
|
|
compaction_score_[level] = score;
|
|
}
|
|
|
|
// sort all the levels based on their score. Higher scores get listed
|
|
// first. Use bubble sort because the number of entries are small.
|
|
for (int i = 0; i < num_levels() - 2; i++) {
|
|
for (int j = i + 1; j < num_levels() - 1; j++) {
|
|
if (compaction_score_[i] < compaction_score_[j]) {
|
|
double score = compaction_score_[i];
|
|
int level = compaction_level_[i];
|
|
compaction_score_[i] = compaction_score_[j];
|
|
compaction_level_[i] = compaction_level_[j];
|
|
compaction_score_[j] = score;
|
|
compaction_level_[j] = level;
|
|
}
|
|
}
|
|
}
|
|
ComputeFilesMarkedForCompaction();
|
|
ComputeBottommostFilesMarkedForCompaction();
|
|
if (mutable_cf_options.ttl > 0) {
|
|
ComputeExpiredTtlFiles(immutable_cf_options, mutable_cf_options.ttl);
|
|
}
|
|
EstimateCompactionBytesNeeded(mutable_cf_options);
|
|
}
|
|
|
|
void VersionStorageInfo::ComputeFilesMarkedForCompaction() {
|
|
files_marked_for_compaction_.clear();
|
|
int last_qualify_level = 0;
|
|
|
|
// Do not include files from the last level with data
|
|
// If table properties collector suggests a file on the last level,
|
|
// we should not move it to a new level.
|
|
for (int level = num_levels() - 1; level >= 1; level--) {
|
|
if (!files_[level].empty()) {
|
|
last_qualify_level = level - 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
for (int level = 0; level <= last_qualify_level; level++) {
|
|
for (auto* f : files_[level]) {
|
|
if (!f->being_compacted && f->marked_for_compaction) {
|
|
files_marked_for_compaction_.emplace_back(level, f);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void VersionStorageInfo::ComputeExpiredTtlFiles(
|
|
const ImmutableCFOptions& ioptions, const uint64_t ttl) {
|
|
assert(ttl > 0);
|
|
|
|
expired_ttl_files_.clear();
|
|
|
|
int64_t _current_time;
|
|
auto status = ioptions.env->GetCurrentTime(&_current_time);
|
|
if (!status.ok()) {
|
|
return;
|
|
}
|
|
const uint64_t current_time = static_cast<uint64_t>(_current_time);
|
|
|
|
for (int level = 0; level < num_levels() - 1; level++) {
|
|
for (auto f : files_[level]) {
|
|
if (!f->being_compacted && f->fd.table_reader != nullptr &&
|
|
f->fd.table_reader->GetTableProperties() != nullptr) {
|
|
auto creation_time =
|
|
f->fd.table_reader->GetTableProperties()->creation_time;
|
|
if (creation_time > 0 && creation_time < (current_time - ttl)) {
|
|
expired_ttl_files_.emplace_back(level, f);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
namespace {
|
|
|
|
// used to sort files by size
|
|
struct Fsize {
|
|
size_t index;
|
|
FileMetaData* file;
|
|
};
|
|
|
|
// Compator that is used to sort files based on their size
|
|
// In normal mode: descending size
|
|
bool CompareCompensatedSizeDescending(const Fsize& first, const Fsize& second) {
|
|
return (first.file->compensated_file_size >
|
|
second.file->compensated_file_size);
|
|
}
|
|
} // anonymous namespace
|
|
|
|
void VersionStorageInfo::AddFile(int level, FileMetaData* f, Logger* info_log) {
|
|
auto* level_files = &files_[level];
|
|
// Must not overlap
|
|
#ifndef NDEBUG
|
|
if (level > 0 && !level_files->empty() &&
|
|
internal_comparator_->Compare(
|
|
(*level_files)[level_files->size() - 1]->largest, f->smallest) >= 0) {
|
|
auto* f2 = (*level_files)[level_files->size() - 1];
|
|
if (info_log != nullptr) {
|
|
Error(info_log, "Adding new file %" PRIu64
|
|
" range (%s, %s) to level %d but overlapping "
|
|
"with existing file %" PRIu64 " %s %s",
|
|
f->fd.GetNumber(), f->smallest.DebugString(true).c_str(),
|
|
f->largest.DebugString(true).c_str(), level, f2->fd.GetNumber(),
|
|
f2->smallest.DebugString(true).c_str(),
|
|
f2->largest.DebugString(true).c_str());
|
|
LogFlush(info_log);
|
|
}
|
|
assert(false);
|
|
}
|
|
#else
|
|
(void)info_log;
|
|
#endif
|
|
f->refs++;
|
|
level_files->push_back(f);
|
|
}
|
|
|
|
// Version::PrepareApply() need to be called before calling the function, or
|
|
// following functions called:
|
|
// 1. UpdateNumNonEmptyLevels();
|
|
// 2. CalculateBaseBytes();
|
|
// 3. UpdateFilesByCompactionPri();
|
|
// 4. GenerateFileIndexer();
|
|
// 5. GenerateLevelFilesBrief();
|
|
// 6. GenerateLevel0NonOverlapping();
|
|
// 7. GenerateBottommostFiles();
|
|
void VersionStorageInfo::SetFinalized() {
|
|
finalized_ = true;
|
|
#ifndef NDEBUG
|
|
if (compaction_style_ != kCompactionStyleLevel) {
|
|
// Not level based compaction.
|
|
return;
|
|
}
|
|
assert(base_level_ < 0 || num_levels() == 1 ||
|
|
(base_level_ >= 1 && base_level_ < num_levels()));
|
|
// Verify all levels newer than base_level are empty except L0
|
|
for (int level = 1; level < base_level(); level++) {
|
|
assert(NumLevelBytes(level) == 0);
|
|
}
|
|
uint64_t max_bytes_prev_level = 0;
|
|
for (int level = base_level(); level < num_levels() - 1; level++) {
|
|
if (LevelFiles(level).size() == 0) {
|
|
continue;
|
|
}
|
|
assert(MaxBytesForLevel(level) >= max_bytes_prev_level);
|
|
max_bytes_prev_level = MaxBytesForLevel(level);
|
|
}
|
|
int num_empty_non_l0_level = 0;
|
|
for (int level = 0; level < num_levels(); level++) {
|
|
assert(LevelFiles(level).size() == 0 ||
|
|
LevelFiles(level).size() == LevelFilesBrief(level).num_files);
|
|
if (level > 0 && NumLevelBytes(level) > 0) {
|
|
num_empty_non_l0_level++;
|
|
}
|
|
if (LevelFiles(level).size() > 0) {
|
|
assert(level < num_non_empty_levels());
|
|
}
|
|
}
|
|
assert(compaction_level_.size() > 0);
|
|
assert(compaction_level_.size() == compaction_score_.size());
|
|
#endif
|
|
}
|
|
|
|
void VersionStorageInfo::UpdateNumNonEmptyLevels() {
|
|
num_non_empty_levels_ = num_levels_;
|
|
for (int i = num_levels_ - 1; i >= 0; i--) {
|
|
if (files_[i].size() != 0) {
|
|
return;
|
|
} else {
|
|
num_non_empty_levels_ = i;
|
|
}
|
|
}
|
|
}
|
|
|
|
namespace {
|
|
// Sort `temp` based on ratio of overlapping size over file size
|
|
void SortFileByOverlappingRatio(
|
|
const InternalKeyComparator& icmp, const std::vector<FileMetaData*>& files,
|
|
const std::vector<FileMetaData*>& next_level_files,
|
|
std::vector<Fsize>* temp) {
|
|
std::unordered_map<uint64_t, uint64_t> file_to_order;
|
|
auto next_level_it = next_level_files.begin();
|
|
|
|
for (auto& file : files) {
|
|
uint64_t overlapping_bytes = 0;
|
|
// Skip files in next level that is smaller than current file
|
|
while (next_level_it != next_level_files.end() &&
|
|
icmp.Compare((*next_level_it)->largest, file->smallest) < 0) {
|
|
next_level_it++;
|
|
}
|
|
|
|
while (next_level_it != next_level_files.end() &&
|
|
icmp.Compare((*next_level_it)->smallest, file->largest) < 0) {
|
|
overlapping_bytes += (*next_level_it)->fd.file_size;
|
|
|
|
if (icmp.Compare((*next_level_it)->largest, file->largest) > 0) {
|
|
// next level file cross large boundary of current file.
|
|
break;
|
|
}
|
|
next_level_it++;
|
|
}
|
|
|
|
assert(file->fd.file_size != 0);
|
|
file_to_order[file->fd.GetNumber()] =
|
|
overlapping_bytes * 1024u / file->fd.file_size;
|
|
}
|
|
|
|
std::sort(temp->begin(), temp->end(),
|
|
[&](const Fsize& f1, const Fsize& f2) -> bool {
|
|
return file_to_order[f1.file->fd.GetNumber()] <
|
|
file_to_order[f2.file->fd.GetNumber()];
|
|
});
|
|
}
|
|
} // namespace
|
|
|
|
void VersionStorageInfo::UpdateFilesByCompactionPri(
|
|
CompactionPri compaction_pri) {
|
|
if (compaction_style_ == kCompactionStyleNone ||
|
|
compaction_style_ == kCompactionStyleFIFO ||
|
|
compaction_style_ == kCompactionStyleUniversal) {
|
|
// don't need this
|
|
return;
|
|
}
|
|
// No need to sort the highest level because it is never compacted.
|
|
for (int level = 0; level < num_levels() - 1; level++) {
|
|
const std::vector<FileMetaData*>& files = files_[level];
|
|
auto& files_by_compaction_pri = files_by_compaction_pri_[level];
|
|
assert(files_by_compaction_pri.size() == 0);
|
|
|
|
// populate a temp vector for sorting based on size
|
|
std::vector<Fsize> temp(files.size());
|
|
for (size_t i = 0; i < files.size(); i++) {
|
|
temp[i].index = i;
|
|
temp[i].file = files[i];
|
|
}
|
|
|
|
// sort the top number_of_files_to_sort_ based on file size
|
|
size_t num = VersionStorageInfo::kNumberFilesToSort;
|
|
if (num > temp.size()) {
|
|
num = temp.size();
|
|
}
|
|
switch (compaction_pri) {
|
|
case kByCompensatedSize:
|
|
std::partial_sort(temp.begin(), temp.begin() + num, temp.end(),
|
|
CompareCompensatedSizeDescending);
|
|
break;
|
|
case kOldestLargestSeqFirst:
|
|
std::sort(temp.begin(), temp.end(),
|
|
[](const Fsize& f1, const Fsize& f2) -> bool {
|
|
return f1.file->fd.largest_seqno <
|
|
f2.file->fd.largest_seqno;
|
|
});
|
|
break;
|
|
case kOldestSmallestSeqFirst:
|
|
std::sort(temp.begin(), temp.end(),
|
|
[](const Fsize& f1, const Fsize& f2) -> bool {
|
|
return f1.file->fd.smallest_seqno <
|
|
f2.file->fd.smallest_seqno;
|
|
});
|
|
break;
|
|
case kMinOverlappingRatio:
|
|
SortFileByOverlappingRatio(*internal_comparator_, files_[level],
|
|
files_[level + 1], &temp);
|
|
break;
|
|
default:
|
|
assert(false);
|
|
}
|
|
assert(temp.size() == files.size());
|
|
|
|
// initialize files_by_compaction_pri_
|
|
for (size_t i = 0; i < temp.size(); i++) {
|
|
files_by_compaction_pri.push_back(static_cast<int>(temp[i].index));
|
|
}
|
|
next_file_to_compact_by_size_[level] = 0;
|
|
assert(files_[level].size() == files_by_compaction_pri_[level].size());
|
|
}
|
|
}
|
|
|
|
void VersionStorageInfo::GenerateLevel0NonOverlapping() {
|
|
assert(!finalized_);
|
|
level0_non_overlapping_ = true;
|
|
if (level_files_brief_.size() == 0) {
|
|
return;
|
|
}
|
|
|
|
// A copy of L0 files sorted by smallest key
|
|
std::vector<FdWithKeyRange> level0_sorted_file(
|
|
level_files_brief_[0].files,
|
|
level_files_brief_[0].files + level_files_brief_[0].num_files);
|
|
std::sort(level0_sorted_file.begin(), level0_sorted_file.end(),
|
|
[this](const FdWithKeyRange& f1, const FdWithKeyRange& f2) -> bool {
|
|
return (internal_comparator_->Compare(f1.smallest_key,
|
|
f2.smallest_key) < 0);
|
|
});
|
|
|
|
for (size_t i = 1; i < level0_sorted_file.size(); ++i) {
|
|
FdWithKeyRange& f = level0_sorted_file[i];
|
|
FdWithKeyRange& prev = level0_sorted_file[i - 1];
|
|
if (internal_comparator_->Compare(prev.largest_key, f.smallest_key) >= 0) {
|
|
level0_non_overlapping_ = false;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void VersionStorageInfo::GenerateBottommostFiles() {
|
|
assert(!finalized_);
|
|
assert(bottommost_files_.empty());
|
|
for (size_t level = 0; level < level_files_brief_.size(); ++level) {
|
|
for (size_t file_idx = 0; file_idx < level_files_brief_[level].num_files;
|
|
++file_idx) {
|
|
const FdWithKeyRange& f = level_files_brief_[level].files[file_idx];
|
|
int l0_file_idx;
|
|
if (level == 0) {
|
|
l0_file_idx = static_cast<int>(file_idx);
|
|
} else {
|
|
l0_file_idx = -1;
|
|
}
|
|
Slice smallest_user_key = ExtractUserKey(f.smallest_key);
|
|
Slice largest_user_key = ExtractUserKey(f.largest_key);
|
|
if (!RangeMightExistAfterSortedRun(smallest_user_key, largest_user_key,
|
|
static_cast<int>(level),
|
|
l0_file_idx)) {
|
|
bottommost_files_.emplace_back(static_cast<int>(level),
|
|
f.file_metadata);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void VersionStorageInfo::UpdateOldestSnapshot(SequenceNumber seqnum) {
|
|
assert(seqnum >= oldest_snapshot_seqnum_);
|
|
oldest_snapshot_seqnum_ = seqnum;
|
|
if (oldest_snapshot_seqnum_ > bottommost_files_mark_threshold_) {
|
|
ComputeBottommostFilesMarkedForCompaction();
|
|
}
|
|
}
|
|
|
|
void VersionStorageInfo::ComputeBottommostFilesMarkedForCompaction() {
|
|
bottommost_files_marked_for_compaction_.clear();
|
|
bottommost_files_mark_threshold_ = kMaxSequenceNumber;
|
|
for (auto& level_and_file : bottommost_files_) {
|
|
if (!level_and_file.second->being_compacted &&
|
|
level_and_file.second->fd.largest_seqno != 0 &&
|
|
level_and_file.second->num_deletions > 1) {
|
|
// largest_seqno might be nonzero due to containing the final key in an
|
|
// earlier compaction, whose seqnum we didn't zero out. Multiple deletions
|
|
// ensures the file really contains deleted or overwritten keys.
|
|
if (level_and_file.second->fd.largest_seqno < oldest_snapshot_seqnum_) {
|
|
bottommost_files_marked_for_compaction_.push_back(level_and_file);
|
|
} else {
|
|
bottommost_files_mark_threshold_ =
|
|
std::min(bottommost_files_mark_threshold_,
|
|
level_and_file.second->fd.largest_seqno);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void Version::Ref() {
|
|
++refs_;
|
|
}
|
|
|
|
bool Version::Unref() {
|
|
assert(refs_ >= 1);
|
|
--refs_;
|
|
if (refs_ == 0) {
|
|
delete this;
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool VersionStorageInfo::OverlapInLevel(int level,
|
|
const Slice* smallest_user_key,
|
|
const Slice* largest_user_key) {
|
|
if (level >= num_non_empty_levels_) {
|
|
// empty level, no overlap
|
|
return false;
|
|
}
|
|
return SomeFileOverlapsRange(*internal_comparator_, (level > 0),
|
|
level_files_brief_[level], smallest_user_key,
|
|
largest_user_key);
|
|
}
|
|
|
|
// Store in "*inputs" all files in "level" that overlap [begin,end]
|
|
// If hint_index is specified, then it points to a file in the
|
|
// overlapping range.
|
|
// The file_index returns a pointer to any file in an overlapping range.
|
|
void VersionStorageInfo::GetOverlappingInputs(
|
|
int level, const InternalKey* begin, const InternalKey* end,
|
|
std::vector<FileMetaData*>* inputs, int hint_index, int* file_index,
|
|
bool expand_range, InternalKey** next_smallest) const {
|
|
if (level >= num_non_empty_levels_) {
|
|
// this level is empty, no overlapping inputs
|
|
return;
|
|
}
|
|
|
|
inputs->clear();
|
|
if (file_index) {
|
|
*file_index = -1;
|
|
}
|
|
const Comparator* user_cmp = user_comparator_;
|
|
if (level > 0) {
|
|
GetOverlappingInputsRangeBinarySearch(level, begin, end, inputs, hint_index,
|
|
file_index, false, next_smallest);
|
|
return;
|
|
}
|
|
|
|
if (next_smallest) {
|
|
// next_smallest key only makes sense for non-level 0, where files are
|
|
// non-overlapping
|
|
*next_smallest = nullptr;
|
|
}
|
|
|
|
Slice user_begin, user_end;
|
|
if (begin != nullptr) {
|
|
user_begin = begin->user_key();
|
|
}
|
|
if (end != nullptr) {
|
|
user_end = end->user_key();
|
|
}
|
|
|
|
// index stores the file index need to check.
|
|
std::list<size_t> index;
|
|
for (size_t i = 0; i < level_files_brief_[level].num_files; i++) {
|
|
index.emplace_back(i);
|
|
}
|
|
|
|
while (!index.empty()) {
|
|
bool found_overlapping_file = false;
|
|
auto iter = index.begin();
|
|
while (iter != index.end()) {
|
|
FdWithKeyRange* f = &(level_files_brief_[level].files[*iter]);
|
|
const Slice file_start = ExtractUserKey(f->smallest_key);
|
|
const Slice file_limit = ExtractUserKey(f->largest_key);
|
|
if (begin != nullptr && user_cmp->Compare(file_limit, user_begin) < 0) {
|
|
// "f" is completely before specified range; skip it
|
|
iter++;
|
|
} else if (end != nullptr &&
|
|
user_cmp->Compare(file_start, user_end) > 0) {
|
|
// "f" is completely after specified range; skip it
|
|
iter++;
|
|
} else {
|
|
// if overlap
|
|
inputs->emplace_back(files_[level][*iter]);
|
|
found_overlapping_file = true;
|
|
// record the first file index.
|
|
if (file_index && *file_index == -1) {
|
|
*file_index = static_cast<int>(*iter);
|
|
}
|
|
// the related file is overlap, erase to avoid checking again.
|
|
iter = index.erase(iter);
|
|
if (expand_range) {
|
|
if (begin != nullptr &&
|
|
user_cmp->Compare(file_start, user_begin) < 0) {
|
|
user_begin = file_start;
|
|
}
|
|
if (end != nullptr && user_cmp->Compare(file_limit, user_end) > 0) {
|
|
user_end = file_limit;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
// if all the files left are not overlap, break
|
|
if (!found_overlapping_file) {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
// Store in "*inputs" files in "level" that within range [begin,end]
|
|
// Guarantee a "clean cut" boundary between the files in inputs
|
|
// and the surrounding files and the maxinum number of files.
|
|
// This will ensure that no parts of a key are lost during compaction.
|
|
// If hint_index is specified, then it points to a file in the range.
|
|
// The file_index returns a pointer to any file in an overlapping range.
|
|
void VersionStorageInfo::GetCleanInputsWithinInterval(
|
|
int level, const InternalKey* begin, const InternalKey* end,
|
|
std::vector<FileMetaData*>* inputs, int hint_index, int* file_index) const {
|
|
inputs->clear();
|
|
if (file_index) {
|
|
*file_index = -1;
|
|
}
|
|
if (level >= num_non_empty_levels_ || level == 0 ||
|
|
level_files_brief_[level].num_files == 0) {
|
|
// this level is empty, no inputs within range
|
|
// also don't support clean input interval within L0
|
|
return;
|
|
}
|
|
|
|
const auto& level_files = level_files_brief_[level];
|
|
if (begin == nullptr) {
|
|
begin = &level_files.files[0].file_metadata->smallest;
|
|
}
|
|
if (end == nullptr) {
|
|
end = &level_files.files[level_files.num_files - 1].file_metadata->largest;
|
|
}
|
|
|
|
GetOverlappingInputsRangeBinarySearch(level, begin, end, inputs,
|
|
hint_index, file_index,
|
|
true /* within_interval */);
|
|
}
|
|
|
|
// Store in "*inputs" all files in "level" that overlap [begin,end]
|
|
// Employ binary search to find at least one file that overlaps the
|
|
// specified range. From that file, iterate backwards and
|
|
// forwards to find all overlapping files.
|
|
// if within_range is set, then only store the maximum clean inputs
|
|
// within range [begin, end]. "clean" means there is a boudnary
|
|
// between the files in "*inputs" and the surrounding files
|
|
void VersionStorageInfo::GetOverlappingInputsRangeBinarySearch(
|
|
int level, const InternalKey* begin, const InternalKey* end,
|
|
std::vector<FileMetaData*>* inputs, int hint_index, int* file_index,
|
|
bool within_interval, InternalKey** next_smallest) const {
|
|
assert(level > 0);
|
|
int min = 0;
|
|
int mid = 0;
|
|
int max = static_cast<int>(files_[level].size()) - 1;
|
|
bool foundOverlap = false;
|
|
auto user_cmp = user_comparator_;
|
|
|
|
// if the caller already knows the index of a file that has overlap,
|
|
// then we can skip the binary search.
|
|
if (hint_index != -1) {
|
|
mid = hint_index;
|
|
foundOverlap = true;
|
|
}
|
|
|
|
while (!foundOverlap && min <= max) {
|
|
mid = (min + max)/2;
|
|
FdWithKeyRange* f = &(level_files_brief_[level].files[mid]);
|
|
auto& smallest = f->file_metadata->smallest;
|
|
auto& largest = f->file_metadata->largest;
|
|
if ((!within_interval && sstableKeyCompare(user_cmp, begin, largest) > 0) ||
|
|
(within_interval && sstableKeyCompare(user_cmp, begin, smallest) > 0)) {
|
|
min = mid + 1;
|
|
} else if ((!within_interval &&
|
|
sstableKeyCompare(user_cmp, smallest, end) > 0) ||
|
|
(within_interval &&
|
|
sstableKeyCompare(user_cmp, largest, end) > 0)) {
|
|
max = mid - 1;
|
|
} else {
|
|
foundOverlap = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
// If there were no overlapping files, return immediately.
|
|
if (!foundOverlap) {
|
|
if (next_smallest) {
|
|
next_smallest = nullptr;
|
|
}
|
|
return;
|
|
}
|
|
// returns the index where an overlap is found
|
|
if (file_index) {
|
|
*file_index = mid;
|
|
}
|
|
|
|
int start_index, end_index;
|
|
if (within_interval) {
|
|
ExtendFileRangeWithinInterval(level, begin, end, mid,
|
|
&start_index, &end_index);
|
|
} else {
|
|
ExtendFileRangeOverlappingInterval(level, begin, end, mid,
|
|
&start_index, &end_index);
|
|
assert(end_index >= start_index);
|
|
}
|
|
// insert overlapping files into vector
|
|
for (int i = start_index; i <= end_index; i++) {
|
|
inputs->push_back(files_[level][i]);
|
|
}
|
|
|
|
if (next_smallest != nullptr) {
|
|
// Provide the next key outside the range covered by inputs
|
|
if (++end_index < static_cast<int>(files_[level].size())) {
|
|
**next_smallest = files_[level][end_index]->smallest;
|
|
} else {
|
|
*next_smallest = nullptr;
|
|
}
|
|
}
|
|
}
|
|
|
|
// Store in *start_index and *end_index the range of all files in
|
|
// "level" that overlap [begin,end]
|
|
// The mid_index specifies the index of at least one file that
|
|
// overlaps the specified range. From that file, iterate backward
|
|
// and forward to find all overlapping files.
|
|
// Use FileLevel in searching, make it faster
|
|
void VersionStorageInfo::ExtendFileRangeOverlappingInterval(
|
|
int level, const InternalKey* begin, const InternalKey* end,
|
|
unsigned int mid_index, int* start_index, int* end_index) const {
|
|
auto user_cmp = user_comparator_;
|
|
const FdWithKeyRange* files = level_files_brief_[level].files;
|
|
#ifndef NDEBUG
|
|
{
|
|
// assert that the file at mid_index overlaps with the range
|
|
assert(mid_index < level_files_brief_[level].num_files);
|
|
const FdWithKeyRange* f = &files[mid_index];
|
|
auto& smallest = f->file_metadata->smallest;
|
|
auto& largest = f->file_metadata->largest;
|
|
if (sstableKeyCompare(user_cmp, begin, smallest) <= 0) {
|
|
assert(sstableKeyCompare(user_cmp, smallest, end) <= 0);
|
|
} else {
|
|
// fprintf(stderr, "ExtendFileRangeOverlappingInterval\n%s - %s\n%s - %s\n%d %d\n",
|
|
// begin ? begin->DebugString().c_str() : "(null)",
|
|
// end ? end->DebugString().c_str() : "(null)",
|
|
// smallest->DebugString().c_str(),
|
|
// largest->DebugString().c_str(),
|
|
// sstableKeyCompare(user_cmp, smallest, begin),
|
|
// sstableKeyCompare(user_cmp, largest, begin));
|
|
assert(sstableKeyCompare(user_cmp, begin, largest) <= 0);
|
|
}
|
|
}
|
|
#endif
|
|
*start_index = mid_index + 1;
|
|
*end_index = mid_index;
|
|
int count __attribute__((__unused__));
|
|
count = 0;
|
|
|
|
// check backwards from 'mid' to lower indices
|
|
for (int i = mid_index; i >= 0 ; i--) {
|
|
const FdWithKeyRange* f = &files[i];
|
|
auto& largest = f->file_metadata->largest;
|
|
if (sstableKeyCompare(user_cmp, begin, largest) <= 0) {
|
|
*start_index = i;
|
|
assert((count++, true));
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
// check forward from 'mid+1' to higher indices
|
|
for (unsigned int i = mid_index+1;
|
|
i < level_files_brief_[level].num_files; i++) {
|
|
const FdWithKeyRange* f = &files[i];
|
|
auto& smallest = f->file_metadata->smallest;
|
|
if (sstableKeyCompare(user_cmp, smallest, end) <= 0) {
|
|
assert((count++, true));
|
|
*end_index = i;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
assert(count == *end_index - *start_index + 1);
|
|
}
|
|
|
|
// Store in *start_index and *end_index the clean range of all files in
|
|
// "level" within [begin,end]
|
|
// The mid_index specifies the index of at least one file within
|
|
// the specified range. From that file, iterate backward
|
|
// and forward to find all overlapping files and then "shrink" to
|
|
// the clean range required.
|
|
// Use FileLevel in searching, make it faster
|
|
void VersionStorageInfo::ExtendFileRangeWithinInterval(
|
|
int level, const InternalKey* begin, const InternalKey* end,
|
|
unsigned int mid_index, int* start_index, int* end_index) const {
|
|
assert(level != 0);
|
|
auto* user_cmp = user_comparator_;
|
|
const FdWithKeyRange* files = level_files_brief_[level].files;
|
|
#ifndef NDEBUG
|
|
{
|
|
// assert that the file at mid_index is within the range
|
|
assert(mid_index < level_files_brief_[level].num_files);
|
|
const FdWithKeyRange* f = &files[mid_index];
|
|
auto& smallest = f->file_metadata->smallest;
|
|
auto& largest = f->file_metadata->largest;
|
|
assert(sstableKeyCompare(user_cmp, begin, smallest) <= 0 &&
|
|
sstableKeyCompare(user_cmp, largest, end) <= 0);
|
|
}
|
|
#endif
|
|
ExtendFileRangeOverlappingInterval(level, begin, end, mid_index,
|
|
start_index, end_index);
|
|
int left = *start_index;
|
|
int right = *end_index;
|
|
// shrink from left to right
|
|
while (left <= right) {
|
|
auto& smallest = files[left].file_metadata->smallest;
|
|
if (sstableKeyCompare(user_cmp, begin, smallest) > 0) {
|
|
left++;
|
|
continue;
|
|
}
|
|
if (left > 0) { // If not first file
|
|
auto& largest = files[left - 1].file_metadata->largest;
|
|
if (sstableKeyCompare(user_cmp, smallest, largest) == 0) {
|
|
left++;
|
|
continue;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
// shrink from right to left
|
|
while (left <= right) {
|
|
auto& largest = files[right].file_metadata->largest;
|
|
if (sstableKeyCompare(user_cmp, largest, end) > 0) {
|
|
right--;
|
|
continue;
|
|
}
|
|
if (right < static_cast<int>(level_files_brief_[level].num_files) -
|
|
1) { // If not the last file
|
|
auto& smallest = files[right + 1].file_metadata->smallest;
|
|
if (sstableKeyCompare(user_cmp, smallest, largest) == 0) {
|
|
// The last user key in range overlaps with the next file's first key
|
|
right--;
|
|
continue;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
*start_index = left;
|
|
*end_index = right;
|
|
}
|
|
|
|
uint64_t VersionStorageInfo::NumLevelBytes(int level) const {
|
|
assert(level >= 0);
|
|
assert(level < num_levels());
|
|
return TotalFileSize(files_[level]);
|
|
}
|
|
|
|
const char* VersionStorageInfo::LevelSummary(
|
|
LevelSummaryStorage* scratch) const {
|
|
int len = 0;
|
|
if (compaction_style_ == kCompactionStyleLevel && num_levels() > 1) {
|
|
assert(base_level_ < static_cast<int>(level_max_bytes_.size()));
|
|
if (level_multiplier_ != 0.0) {
|
|
len = snprintf(
|
|
scratch->buffer, sizeof(scratch->buffer),
|
|
"base level %d level multiplier %.2f max bytes base %" PRIu64 " ",
|
|
base_level_, level_multiplier_, level_max_bytes_[base_level_]);
|
|
}
|
|
}
|
|
len +=
|
|
snprintf(scratch->buffer + len, sizeof(scratch->buffer) - len, "files[");
|
|
for (int i = 0; i < num_levels(); i++) {
|
|
int sz = sizeof(scratch->buffer) - len;
|
|
int ret = snprintf(scratch->buffer + len, sz, "%d ", int(files_[i].size()));
|
|
if (ret < 0 || ret >= sz) break;
|
|
len += ret;
|
|
}
|
|
if (len > 0) {
|
|
// overwrite the last space
|
|
--len;
|
|
}
|
|
len += snprintf(scratch->buffer + len, sizeof(scratch->buffer) - len,
|
|
"] max score %.2f", compaction_score_[0]);
|
|
|
|
if (!files_marked_for_compaction_.empty()) {
|
|
snprintf(scratch->buffer + len, sizeof(scratch->buffer) - len,
|
|
" (%" ROCKSDB_PRIszt " files need compaction)",
|
|
files_marked_for_compaction_.size());
|
|
}
|
|
|
|
return scratch->buffer;
|
|
}
|
|
|
|
const char* VersionStorageInfo::LevelFileSummary(FileSummaryStorage* scratch,
|
|
int level) const {
|
|
int len = snprintf(scratch->buffer, sizeof(scratch->buffer), "files_size[");
|
|
for (const auto& f : files_[level]) {
|
|
int sz = sizeof(scratch->buffer) - len;
|
|
char sztxt[16];
|
|
AppendHumanBytes(f->fd.GetFileSize(), sztxt, sizeof(sztxt));
|
|
int ret = snprintf(scratch->buffer + len, sz,
|
|
"#%" PRIu64 "(seq=%" PRIu64 ",sz=%s,%d) ",
|
|
f->fd.GetNumber(), f->fd.smallest_seqno, sztxt,
|
|
static_cast<int>(f->being_compacted));
|
|
if (ret < 0 || ret >= sz)
|
|
break;
|
|
len += ret;
|
|
}
|
|
// overwrite the last space (only if files_[level].size() is non-zero)
|
|
if (files_[level].size() && len > 0) {
|
|
--len;
|
|
}
|
|
snprintf(scratch->buffer + len, sizeof(scratch->buffer) - len, "]");
|
|
return scratch->buffer;
|
|
}
|
|
|
|
int64_t VersionStorageInfo::MaxNextLevelOverlappingBytes() {
|
|
uint64_t result = 0;
|
|
std::vector<FileMetaData*> overlaps;
|
|
for (int level = 1; level < num_levels() - 1; level++) {
|
|
for (const auto& f : files_[level]) {
|
|
GetOverlappingInputs(level + 1, &f->smallest, &f->largest, &overlaps);
|
|
const uint64_t sum = TotalFileSize(overlaps);
|
|
if (sum > result) {
|
|
result = sum;
|
|
}
|
|
}
|
|
}
|
|
return result;
|
|
}
|
|
|
|
uint64_t VersionStorageInfo::MaxBytesForLevel(int level) const {
|
|
// Note: the result for level zero is not really used since we set
|
|
// the level-0 compaction threshold based on number of files.
|
|
assert(level >= 0);
|
|
assert(level < static_cast<int>(level_max_bytes_.size()));
|
|
return level_max_bytes_[level];
|
|
}
|
|
|
|
void VersionStorageInfo::CalculateBaseBytes(const ImmutableCFOptions& ioptions,
|
|
const MutableCFOptions& options) {
|
|
// Special logic to set number of sorted runs.
|
|
// It is to match the previous behavior when all files are in L0.
|
|
int num_l0_count = static_cast<int>(files_[0].size());
|
|
if (compaction_style_ == kCompactionStyleUniversal) {
|
|
// For universal compaction, we use level0 score to indicate
|
|
// compaction score for the whole DB. Adding other levels as if
|
|
// they are L0 files.
|
|
for (int i = 1; i < num_levels(); i++) {
|
|
if (!files_[i].empty()) {
|
|
num_l0_count++;
|
|
}
|
|
}
|
|
}
|
|
set_l0_delay_trigger_count(num_l0_count);
|
|
|
|
level_max_bytes_.resize(ioptions.num_levels);
|
|
if (!ioptions.level_compaction_dynamic_level_bytes) {
|
|
base_level_ = (ioptions.compaction_style == kCompactionStyleLevel) ? 1 : -1;
|
|
|
|
// Calculate for static bytes base case
|
|
for (int i = 0; i < ioptions.num_levels; ++i) {
|
|
if (i == 0 && ioptions.compaction_style == kCompactionStyleUniversal) {
|
|
level_max_bytes_[i] = options.max_bytes_for_level_base;
|
|
} else if (i > 1) {
|
|
level_max_bytes_[i] = MultiplyCheckOverflow(
|
|
MultiplyCheckOverflow(level_max_bytes_[i - 1],
|
|
options.max_bytes_for_level_multiplier),
|
|
options.MaxBytesMultiplerAdditional(i - 1));
|
|
} else {
|
|
level_max_bytes_[i] = options.max_bytes_for_level_base;
|
|
}
|
|
}
|
|
} else {
|
|
uint64_t max_level_size = 0;
|
|
|
|
int first_non_empty_level = -1;
|
|
// Find size of non-L0 level of most data.
|
|
// Cannot use the size of the last level because it can be empty or less
|
|
// than previous levels after compaction.
|
|
for (int i = 1; i < num_levels_; i++) {
|
|
uint64_t total_size = 0;
|
|
for (const auto& f : files_[i]) {
|
|
total_size += f->fd.GetFileSize();
|
|
}
|
|
if (total_size > 0 && first_non_empty_level == -1) {
|
|
first_non_empty_level = i;
|
|
}
|
|
if (total_size > max_level_size) {
|
|
max_level_size = total_size;
|
|
}
|
|
}
|
|
|
|
// Prefill every level's max bytes to disallow compaction from there.
|
|
for (int i = 0; i < num_levels_; i++) {
|
|
level_max_bytes_[i] = std::numeric_limits<uint64_t>::max();
|
|
}
|
|
|
|
if (max_level_size == 0) {
|
|
// No data for L1 and up. L0 compacts to last level directly.
|
|
// No compaction from L1+ needs to be scheduled.
|
|
base_level_ = num_levels_ - 1;
|
|
} else {
|
|
uint64_t l0_size = 0;
|
|
for (const auto& f : files_[0]) {
|
|
l0_size += f->fd.GetFileSize();
|
|
}
|
|
|
|
uint64_t base_bytes_max =
|
|
std::max(options.max_bytes_for_level_base, l0_size);
|
|
uint64_t base_bytes_min = static_cast<uint64_t>(
|
|
base_bytes_max / options.max_bytes_for_level_multiplier);
|
|
|
|
// Try whether we can make last level's target size to be max_level_size
|
|
uint64_t cur_level_size = max_level_size;
|
|
for (int i = num_levels_ - 2; i >= first_non_empty_level; i--) {
|
|
// Round up after dividing
|
|
cur_level_size = static_cast<uint64_t>(
|
|
cur_level_size / options.max_bytes_for_level_multiplier);
|
|
}
|
|
|
|
// Calculate base level and its size.
|
|
uint64_t base_level_size;
|
|
if (cur_level_size <= base_bytes_min) {
|
|
// Case 1. If we make target size of last level to be max_level_size,
|
|
// target size of the first non-empty level would be smaller than
|
|
// base_bytes_min. We set it be base_bytes_min.
|
|
base_level_size = base_bytes_min + 1U;
|
|
base_level_ = first_non_empty_level;
|
|
ROCKS_LOG_WARN(ioptions.info_log,
|
|
"More existing levels in DB than needed. "
|
|
"max_bytes_for_level_multiplier may not be guaranteed.");
|
|
} else {
|
|
// Find base level (where L0 data is compacted to).
|
|
base_level_ = first_non_empty_level;
|
|
while (base_level_ > 1 && cur_level_size > base_bytes_max) {
|
|
--base_level_;
|
|
cur_level_size = static_cast<uint64_t>(
|
|
cur_level_size / options.max_bytes_for_level_multiplier);
|
|
}
|
|
if (cur_level_size > base_bytes_max) {
|
|
// Even L1 will be too large
|
|
assert(base_level_ == 1);
|
|
base_level_size = base_bytes_max;
|
|
} else {
|
|
base_level_size = cur_level_size;
|
|
}
|
|
}
|
|
|
|
level_multiplier_ = options.max_bytes_for_level_multiplier;
|
|
assert(base_level_size > 0);
|
|
if (l0_size > base_level_size &&
|
|
(l0_size > options.max_bytes_for_level_base ||
|
|
static_cast<int>(files_[0].size() / 2) >=
|
|
options.level0_file_num_compaction_trigger)) {
|
|
// We adjust the base level according to actual L0 size, and adjust
|
|
// the level multiplier accordingly, when:
|
|
// 1. the L0 size is larger than level size base, or
|
|
// 2. number of L0 files reaches twice the L0->L1 compaction trigger
|
|
// We don't do this otherwise to keep the LSM-tree structure stable
|
|
// unless the L0 compation is backlogged.
|
|
base_level_size = l0_size;
|
|
if (base_level_ == num_levels_ - 1) {
|
|
level_multiplier_ = 1.0;
|
|
} else {
|
|
level_multiplier_ = std::pow(
|
|
static_cast<double>(max_level_size) /
|
|
static_cast<double>(base_level_size),
|
|
1.0 / static_cast<double>(num_levels_ - base_level_ - 1));
|
|
}
|
|
}
|
|
|
|
uint64_t level_size = base_level_size;
|
|
for (int i = base_level_; i < num_levels_; i++) {
|
|
if (i > base_level_) {
|
|
level_size = MultiplyCheckOverflow(level_size, level_multiplier_);
|
|
}
|
|
// Don't set any level below base_bytes_max. Otherwise, the LSM can
|
|
// assume an hourglass shape where L1+ sizes are smaller than L0. This
|
|
// causes compaction scoring, which depends on level sizes, to favor L1+
|
|
// at the expense of L0, which may fill up and stall.
|
|
level_max_bytes_[i] = std::max(level_size, base_bytes_max);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
uint64_t VersionStorageInfo::EstimateLiveDataSize() const {
|
|
// Estimate the live data size by adding up the size of the last level for all
|
|
// key ranges. Note: Estimate depends on the ordering of files in level 0
|
|
// because files in level 0 can be overlapping.
|
|
uint64_t size = 0;
|
|
|
|
auto ikey_lt = [this](InternalKey* x, InternalKey* y) {
|
|
return internal_comparator_->Compare(*x, *y) < 0;
|
|
};
|
|
// (Ordered) map of largest keys in non-overlapping files
|
|
std::map<InternalKey*, FileMetaData*, decltype(ikey_lt)> ranges(ikey_lt);
|
|
|
|
for (int l = num_levels_ - 1; l >= 0; l--) {
|
|
bool found_end = false;
|
|
for (auto file : files_[l]) {
|
|
// Find the first file where the largest key is larger than the smallest
|
|
// key of the current file. If this file does not overlap with the
|
|
// current file, none of the files in the map does. If there is
|
|
// no potential overlap, we can safely insert the rest of this level
|
|
// (if the level is not 0) into the map without checking again because
|
|
// the elements in the level are sorted and non-overlapping.
|
|
auto lb = (found_end && l != 0) ?
|
|
ranges.end() : ranges.lower_bound(&file->smallest);
|
|
found_end = (lb == ranges.end());
|
|
if (found_end || internal_comparator_->Compare(
|
|
file->largest, (*lb).second->smallest) < 0) {
|
|
ranges.emplace_hint(lb, &file->largest, file);
|
|
size += file->fd.file_size;
|
|
}
|
|
}
|
|
}
|
|
return size;
|
|
}
|
|
|
|
bool VersionStorageInfo::RangeMightExistAfterSortedRun(
|
|
const Slice& smallest_user_key, const Slice& largest_user_key,
|
|
int last_level, int last_l0_idx) {
|
|
assert((last_l0_idx != -1) == (last_level == 0));
|
|
// TODO(ajkr): this preserves earlier behavior where we considered an L0 file
|
|
// bottommost only if it's the oldest L0 file and there are no files on older
|
|
// levels. It'd be better to consider it bottommost if there's no overlap in
|
|
// older levels/files.
|
|
if (last_level == 0 &&
|
|
last_l0_idx != static_cast<int>(LevelFiles(0).size() - 1)) {
|
|
return true;
|
|
}
|
|
|
|
// Checks whether there are files living beyond the `last_level`. If lower
|
|
// levels have files, it checks for overlap between [`smallest_key`,
|
|
// `largest_key`] and those files. Bottomlevel optimizations can be made if
|
|
// there are no files in lower levels or if there is no overlap with the files
|
|
// in the lower levels.
|
|
for (int level = last_level + 1; level < num_levels(); level++) {
|
|
// The range is not in the bottommost level if there are files in lower
|
|
// levels when the `last_level` is 0 or if there are files in lower levels
|
|
// which overlap with [`smallest_key`, `largest_key`].
|
|
if (files_[level].size() > 0 &&
|
|
(last_level == 0 ||
|
|
OverlapInLevel(level, &smallest_user_key, &largest_user_key))) {
|
|
return true;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void Version::AddLiveFiles(std::vector<FileDescriptor>* live) {
|
|
for (int level = 0; level < storage_info_.num_levels(); level++) {
|
|
const std::vector<FileMetaData*>& files = storage_info_.files_[level];
|
|
for (const auto& file : files) {
|
|
live->push_back(file->fd);
|
|
}
|
|
}
|
|
}
|
|
|
|
std::string Version::DebugString(bool hex, bool print_stats) const {
|
|
std::string r;
|
|
for (int level = 0; level < storage_info_.num_levels_; level++) {
|
|
// E.g.,
|
|
// --- level 1 ---
|
|
// 17:123['a' .. 'd']
|
|
// 20:43['e' .. 'g']
|
|
//
|
|
// if print_stats=true:
|
|
// 17:123['a' .. 'd'](4096)
|
|
r.append("--- level ");
|
|
AppendNumberTo(&r, level);
|
|
r.append(" --- version# ");
|
|
AppendNumberTo(&r, version_number_);
|
|
r.append(" ---\n");
|
|
const std::vector<FileMetaData*>& files = storage_info_.files_[level];
|
|
for (size_t i = 0; i < files.size(); i++) {
|
|
r.push_back(' ');
|
|
AppendNumberTo(&r, files[i]->fd.GetNumber());
|
|
r.push_back(':');
|
|
AppendNumberTo(&r, files[i]->fd.GetFileSize());
|
|
r.append("[");
|
|
r.append(files[i]->smallest.DebugString(hex));
|
|
r.append(" .. ");
|
|
r.append(files[i]->largest.DebugString(hex));
|
|
r.append("]");
|
|
if (print_stats) {
|
|
r.append("(");
|
|
r.append(ToString(
|
|
files[i]->stats.num_reads_sampled.load(std::memory_order_relaxed)));
|
|
r.append(")");
|
|
}
|
|
r.append("\n");
|
|
}
|
|
}
|
|
return r;
|
|
}
|
|
|
|
// this is used to batch writes to the manifest file
|
|
struct VersionSet::ManifestWriter {
|
|
Status status;
|
|
bool done;
|
|
InstrumentedCondVar cv;
|
|
ColumnFamilyData* cfd;
|
|
const MutableCFOptions mutable_cf_options;
|
|
const autovector<VersionEdit*>& edit_list;
|
|
|
|
explicit ManifestWriter(InstrumentedMutex* mu, ColumnFamilyData* _cfd,
|
|
const MutableCFOptions& cf_options,
|
|
const autovector<VersionEdit*>& e)
|
|
: done(false),
|
|
cv(mu),
|
|
cfd(_cfd),
|
|
mutable_cf_options(cf_options),
|
|
edit_list(e) {}
|
|
};
|
|
|
|
VersionSet::VersionSet(const std::string& dbname,
|
|
const ImmutableDBOptions* _db_options,
|
|
const EnvOptions& storage_options, Cache* table_cache,
|
|
WriteBufferManager* write_buffer_manager,
|
|
WriteController* write_controller)
|
|
: column_family_set_(
|
|
new ColumnFamilySet(dbname, _db_options, storage_options, table_cache,
|
|
write_buffer_manager, write_controller)),
|
|
env_(_db_options->env),
|
|
dbname_(dbname),
|
|
db_options_(_db_options),
|
|
next_file_number_(2),
|
|
manifest_file_number_(0), // Filled by Recover()
|
|
options_file_number_(0),
|
|
pending_manifest_file_number_(0),
|
|
last_sequence_(0),
|
|
last_allocated_sequence_(0),
|
|
last_published_sequence_(0),
|
|
prev_log_number_(0),
|
|
current_version_number_(0),
|
|
manifest_file_size_(0),
|
|
env_options_(storage_options) {}
|
|
|
|
void CloseTables(void* ptr, size_t) {
|
|
TableReader* table_reader = reinterpret_cast<TableReader*>(ptr);
|
|
table_reader->Close();
|
|
}
|
|
|
|
VersionSet::~VersionSet() {
|
|
// we need to delete column_family_set_ because its destructor depends on
|
|
// VersionSet
|
|
Cache* table_cache = column_family_set_->get_table_cache();
|
|
table_cache->ApplyToAllCacheEntries(&CloseTables, false /* thread_safe */);
|
|
column_family_set_.reset();
|
|
for (auto& file : obsolete_files_) {
|
|
if (file.metadata->table_reader_handle) {
|
|
table_cache->Release(file.metadata->table_reader_handle);
|
|
TableCache::Evict(table_cache, file.metadata->fd.GetNumber());
|
|
}
|
|
file.DeleteMetadata();
|
|
}
|
|
obsolete_files_.clear();
|
|
}
|
|
|
|
void VersionSet::AppendVersion(ColumnFamilyData* column_family_data,
|
|
Version* v) {
|
|
// compute new compaction score
|
|
v->storage_info()->ComputeCompactionScore(
|
|
*column_family_data->ioptions(),
|
|
*column_family_data->GetLatestMutableCFOptions());
|
|
|
|
// Mark v finalized
|
|
v->storage_info_.SetFinalized();
|
|
|
|
// Make "v" current
|
|
assert(v->refs_ == 0);
|
|
Version* current = column_family_data->current();
|
|
assert(v != current);
|
|
if (current != nullptr) {
|
|
assert(current->refs_ > 0);
|
|
current->Unref();
|
|
}
|
|
column_family_data->SetCurrent(v);
|
|
v->Ref();
|
|
|
|
// Append to linked list
|
|
v->prev_ = column_family_data->dummy_versions()->prev_;
|
|
v->next_ = column_family_data->dummy_versions();
|
|
v->prev_->next_ = v;
|
|
v->next_->prev_ = v;
|
|
}
|
|
|
|
Status VersionSet::ProcessManifestWrites(
|
|
std::deque<ManifestWriter>& writers, InstrumentedMutex* mu,
|
|
Directory* db_directory, bool new_descriptor_log,
|
|
const ColumnFamilyOptions* new_cf_options) {
|
|
assert(!writers.empty());
|
|
ManifestWriter& first_writer = writers.front();
|
|
ManifestWriter* last_writer = &first_writer;
|
|
|
|
assert(!manifest_writers_.empty());
|
|
assert(manifest_writers_.front() == &first_writer);
|
|
|
|
autovector<VersionEdit*> batch_edits;
|
|
autovector<Version*> versions;
|
|
autovector<const MutableCFOptions*> mutable_cf_options_ptrs;
|
|
std::vector<std::unique_ptr<BaseReferencedVersionBuilder>> builder_guards;
|
|
|
|
if (first_writer.edit_list.front()->IsColumnFamilyManipulation()) {
|
|
// No group commits for column family add or drop
|
|
LogAndApplyCFHelper(first_writer.edit_list.front());
|
|
batch_edits.push_back(first_writer.edit_list.front());
|
|
} else {
|
|
auto it = manifest_writers_.cbegin();
|
|
while (it != manifest_writers_.cend()) {
|
|
if ((*it)->edit_list.front()->IsColumnFamilyManipulation()) {
|
|
// no group commits for column family add or drop
|
|
break;
|
|
}
|
|
last_writer = *(it++);
|
|
assert(last_writer != nullptr);
|
|
assert(last_writer->cfd != nullptr);
|
|
if (last_writer->cfd != nullptr && last_writer->cfd->IsDropped()) {
|
|
continue;
|
|
}
|
|
// We do a linear search on versions because versions is small.
|
|
// TODO(yanqin) maybe consider unordered_map
|
|
Version* version = nullptr;
|
|
VersionBuilder* builder = nullptr;
|
|
for (int i = 0; i != static_cast<int>(versions.size()); ++i) {
|
|
uint32_t cf_id = last_writer->cfd->GetID();
|
|
if (versions[i]->cfd()->GetID() == cf_id) {
|
|
version = versions[i];
|
|
assert(!builder_guards.empty() &&
|
|
builder_guards.size() == versions.size());
|
|
builder = builder_guards[i]->version_builder();
|
|
TEST_SYNC_POINT_CALLBACK(
|
|
"VersionSet::ProcessManifestWrites:SameColumnFamily", &cf_id);
|
|
break;
|
|
}
|
|
}
|
|
if (version == nullptr) {
|
|
version = new Version(last_writer->cfd, this, env_options_,
|
|
last_writer->mutable_cf_options,
|
|
current_version_number_++);
|
|
versions.push_back(version);
|
|
mutable_cf_options_ptrs.push_back(&last_writer->mutable_cf_options);
|
|
builder_guards.emplace_back(
|
|
new BaseReferencedVersionBuilder(last_writer->cfd));
|
|
builder = builder_guards.back()->version_builder();
|
|
}
|
|
assert(builder != nullptr); // make checker happy
|
|
for (const auto& e : last_writer->edit_list) {
|
|
LogAndApplyHelper(last_writer->cfd, builder, version, e, mu);
|
|
batch_edits.push_back(e);
|
|
}
|
|
}
|
|
for (int i = 0; i < static_cast<int>(versions.size()); ++i) {
|
|
assert(!builder_guards.empty() &&
|
|
builder_guards.size() == versions.size());
|
|
auto* builder = builder_guards[i]->version_builder();
|
|
builder->SaveTo(versions[i]->storage_info());
|
|
}
|
|
}
|
|
|
|
uint64_t new_manifest_file_size = 0;
|
|
Status s;
|
|
|
|
assert(pending_manifest_file_number_ == 0);
|
|
if (!descriptor_log_ ||
|
|
manifest_file_size_ > db_options_->max_manifest_file_size) {
|
|
pending_manifest_file_number_ = NewFileNumber();
|
|
batch_edits.back()->SetNextFile(next_file_number_.load());
|
|
new_descriptor_log = true;
|
|
} else {
|
|
pending_manifest_file_number_ = manifest_file_number_;
|
|
}
|
|
|
|
if (new_descriptor_log) {
|
|
// if we are writing out new snapshot make sure to persist max column
|
|
// family.
|
|
if (column_family_set_->GetMaxColumnFamily() > 0) {
|
|
first_writer.edit_list.front()->SetMaxColumnFamily(
|
|
column_family_set_->GetMaxColumnFamily());
|
|
}
|
|
}
|
|
|
|
{
|
|
EnvOptions opt_env_opts = env_->OptimizeForManifestWrite(env_options_);
|
|
mu->Unlock();
|
|
|
|
TEST_SYNC_POINT("VersionSet::LogAndApply:WriteManifest");
|
|
if (!first_writer.edit_list.front()->IsColumnFamilyManipulation() &&
|
|
column_family_set_->get_table_cache()->GetCapacity() ==
|
|
TableCache::kInfiniteCapacity) {
|
|
for (int i = 0; i < static_cast<int>(versions.size()); ++i) {
|
|
assert(!builder_guards.empty() &&
|
|
builder_guards.size() == versions.size());
|
|
assert(!mutable_cf_options_ptrs.empty() &&
|
|
builder_guards.size() == versions.size());
|
|
ColumnFamilyData* cfd = versions[i]->cfd_;
|
|
builder_guards[i]->version_builder()->LoadTableHandlers(
|
|
cfd->internal_stats(), cfd->ioptions()->optimize_filters_for_hits,
|
|
true /* prefetch_index_and_filter_in_cache */,
|
|
mutable_cf_options_ptrs[i]->prefix_extractor.get());
|
|
}
|
|
}
|
|
|
|
// This is fine because everything inside of this block is serialized --
|
|
// only one thread can be here at the same time
|
|
if (new_descriptor_log) {
|
|
// create new manifest file
|
|
ROCKS_LOG_INFO(db_options_->info_log, "Creating manifest %" PRIu64 "\n",
|
|
pending_manifest_file_number_);
|
|
std::string descriptor_fname =
|
|
DescriptorFileName(dbname_, pending_manifest_file_number_);
|
|
unique_ptr<WritableFile> descriptor_file;
|
|
s = NewWritableFile(env_, descriptor_fname, &descriptor_file,
|
|
opt_env_opts);
|
|
if (s.ok()) {
|
|
descriptor_file->SetPreallocationBlockSize(
|
|
db_options_->manifest_preallocation_size);
|
|
|
|
unique_ptr<WritableFileWriter> file_writer(new WritableFileWriter(
|
|
std::move(descriptor_file), descriptor_fname, opt_env_opts, nullptr,
|
|
db_options_->listeners));
|
|
descriptor_log_.reset(
|
|
new log::Writer(std::move(file_writer), 0, false));
|
|
s = WriteSnapshot(descriptor_log_.get());
|
|
}
|
|
}
|
|
|
|
if (!first_writer.edit_list.front()->IsColumnFamilyManipulation()) {
|
|
for (int i = 0; i < static_cast<int>(versions.size()); ++i) {
|
|
versions[i]->PrepareApply(*mutable_cf_options_ptrs[i], true);
|
|
}
|
|
}
|
|
|
|
// Write new records to MANIFEST log
|
|
if (s.ok()) {
|
|
for (auto& e : batch_edits) {
|
|
std::string record;
|
|
if (!e->EncodeTo(&record)) {
|
|
s = Status::Corruption("Unable to encode VersionEdit:" +
|
|
e->DebugString(true));
|
|
break;
|
|
}
|
|
TEST_KILL_RANDOM("VersionSet::LogAndApply:BeforeAddRecord",
|
|
rocksdb_kill_odds * REDUCE_ODDS2);
|
|
s = descriptor_log_->AddRecord(record);
|
|
if (!s.ok()) {
|
|
break;
|
|
}
|
|
}
|
|
if (s.ok()) {
|
|
s = SyncManifest(env_, db_options_, descriptor_log_->file());
|
|
}
|
|
if (!s.ok()) {
|
|
ROCKS_LOG_ERROR(db_options_->info_log, "MANIFEST write %s\n",
|
|
s.ToString().c_str());
|
|
}
|
|
}
|
|
|
|
// If we just created a new descriptor file, install it by writing a
|
|
// new CURRENT file that points to it.
|
|
if (s.ok() && new_descriptor_log) {
|
|
s = SetCurrentFile(env_, dbname_, pending_manifest_file_number_,
|
|
db_directory);
|
|
}
|
|
|
|
if (s.ok()) {
|
|
// find offset in manifest file where this version is stored.
|
|
new_manifest_file_size = descriptor_log_->file()->GetFileSize();
|
|
}
|
|
|
|
if (first_writer.edit_list.front()->is_column_family_drop_) {
|
|
TEST_SYNC_POINT("VersionSet::LogAndApply::ColumnFamilyDrop:0");
|
|
TEST_SYNC_POINT("VersionSet::LogAndApply::ColumnFamilyDrop:1");
|
|
TEST_SYNC_POINT("VersionSet::LogAndApply::ColumnFamilyDrop:2");
|
|
}
|
|
|
|
LogFlush(db_options_->info_log);
|
|
TEST_SYNC_POINT("VersionSet::LogAndApply:WriteManifestDone");
|
|
mu->Lock();
|
|
}
|
|
|
|
// Append the old manifest file to the obsolete_manifest_ list to be deleted
|
|
// by PurgeObsoleteFiles later.
|
|
if (s.ok() && new_descriptor_log) {
|
|
obsolete_manifests_.emplace_back(
|
|
DescriptorFileName("", manifest_file_number_));
|
|
}
|
|
|
|
// Install the new versions
|
|
if (s.ok()) {
|
|
if (first_writer.edit_list.front()->is_column_family_add_) {
|
|
assert(batch_edits.size() == 1);
|
|
assert(new_cf_options != nullptr);
|
|
CreateColumnFamily(*new_cf_options, first_writer.edit_list.front());
|
|
} else if (first_writer.edit_list.front()->is_column_family_drop_) {
|
|
assert(batch_edits.size() == 1);
|
|
first_writer.cfd->SetDropped();
|
|
if (first_writer.cfd->Unref()) {
|
|
delete first_writer.cfd;
|
|
}
|
|
} else {
|
|
// Each version in versions corresponds to a column family.
|
|
// For each column family, update its log number indicating that logs
|
|
// with number smaller than this should be ignored.
|
|
for (const auto version : versions) {
|
|
uint64_t max_log_number_in_batch = 0;
|
|
uint32_t cf_id = version->cfd_->GetID();
|
|
for (const auto& e : batch_edits) {
|
|
if (e->has_log_number_ && e->column_family_ == cf_id) {
|
|
max_log_number_in_batch =
|
|
std::max(max_log_number_in_batch, e->log_number_);
|
|
}
|
|
}
|
|
if (max_log_number_in_batch != 0) {
|
|
assert(version->cfd_->GetLogNumber() <= max_log_number_in_batch);
|
|
version->cfd_->SetLogNumber(max_log_number_in_batch);
|
|
}
|
|
}
|
|
|
|
uint64_t last_min_log_number_to_keep = 0;
|
|
for (auto& e : batch_edits) {
|
|
if (e->has_min_log_number_to_keep_) {
|
|
last_min_log_number_to_keep =
|
|
std::max(last_min_log_number_to_keep, e->min_log_number_to_keep_);
|
|
}
|
|
}
|
|
|
|
if (last_min_log_number_to_keep != 0) {
|
|
// Should only be set in 2PC mode.
|
|
MarkMinLogNumberToKeep2PC(last_min_log_number_to_keep);
|
|
}
|
|
|
|
for (int i = 0; i < static_cast<int>(versions.size()); ++i) {
|
|
ColumnFamilyData* cfd = versions[i]->cfd_;
|
|
AppendVersion(cfd, versions[i]);
|
|
}
|
|
}
|
|
manifest_file_number_ = pending_manifest_file_number_;
|
|
manifest_file_size_ = new_manifest_file_size;
|
|
prev_log_number_ = first_writer.edit_list.front()->prev_log_number_;
|
|
} else {
|
|
std::string version_edits;
|
|
for (auto& e : batch_edits) {
|
|
version_edits += ("\n" + e->DebugString(true));
|
|
}
|
|
ROCKS_LOG_ERROR(db_options_->info_log,
|
|
"Error in committing version edit to MANIFEST: %s",
|
|
version_edits.c_str());
|
|
for (auto v : versions) {
|
|
delete v;
|
|
}
|
|
if (new_descriptor_log) {
|
|
ROCKS_LOG_INFO(db_options_->info_log,
|
|
"Deleting manifest %" PRIu64 " current manifest %" PRIu64
|
|
"\n",
|
|
manifest_file_number_, pending_manifest_file_number_);
|
|
descriptor_log_.reset();
|
|
env_->DeleteFile(
|
|
DescriptorFileName(dbname_, pending_manifest_file_number_));
|
|
}
|
|
}
|
|
|
|
pending_manifest_file_number_ = 0;
|
|
|
|
// wake up all the waiting writers
|
|
while (true) {
|
|
ManifestWriter* ready = manifest_writers_.front();
|
|
manifest_writers_.pop_front();
|
|
bool need_signal = true;
|
|
for (const auto& w : writers) {
|
|
if (&w == ready) {
|
|
need_signal = false;
|
|
break;
|
|
}
|
|
}
|
|
ready->status = s;
|
|
ready->done = true;
|
|
if (need_signal) {
|
|
ready->cv.Signal();
|
|
}
|
|
if (ready == last_writer) {
|
|
break;
|
|
}
|
|
}
|
|
if (!manifest_writers_.empty()) {
|
|
manifest_writers_.front()->cv.Signal();
|
|
}
|
|
return s;
|
|
}
|
|
|
|
// 'datas' is gramatically incorrect. We still use this notation is to indicate
|
|
// that this variable represents a collection of column_family_data.
|
|
Status VersionSet::LogAndApply(
|
|
const autovector<ColumnFamilyData*>& column_family_datas,
|
|
const autovector<const MutableCFOptions*>& mutable_cf_options_list,
|
|
const autovector<autovector<VersionEdit*>>& edit_lists,
|
|
InstrumentedMutex* mu, Directory* db_directory, bool new_descriptor_log,
|
|
const ColumnFamilyOptions* new_cf_options) {
|
|
mu->AssertHeld();
|
|
int num_edits = 0;
|
|
for (const auto& elist : edit_lists) {
|
|
num_edits += static_cast<int>(elist.size());
|
|
}
|
|
if (num_edits == 0) {
|
|
return Status::OK();
|
|
} else if (num_edits > 1) {
|
|
#ifndef NDEBUG
|
|
for (const auto& edit_list : edit_lists) {
|
|
for (const auto& edit : edit_list) {
|
|
assert(!edit->IsColumnFamilyManipulation());
|
|
}
|
|
}
|
|
#endif /* ! NDEBUG */
|
|
}
|
|
|
|
int num_cfds = static_cast<int>(column_family_datas.size());
|
|
if (num_cfds == 1 && column_family_datas[0] == nullptr) {
|
|
assert(edit_lists.size() == 1 && edit_lists[0].size() == 1);
|
|
assert(edit_lists[0][0]->is_column_family_add_);
|
|
assert(new_cf_options != nullptr);
|
|
}
|
|
std::deque<ManifestWriter> writers;
|
|
if (num_cfds > 0) {
|
|
assert(static_cast<size_t>(num_cfds) == mutable_cf_options_list.size());
|
|
assert(static_cast<size_t>(num_cfds) == edit_lists.size());
|
|
}
|
|
for (int i = 0; i < num_cfds; ++i) {
|
|
writers.emplace_back(mu, column_family_datas[i],
|
|
*mutable_cf_options_list[i], edit_lists[i]);
|
|
manifest_writers_.push_back(&writers[i]);
|
|
}
|
|
assert(!writers.empty());
|
|
ManifestWriter& first_writer = writers.front();
|
|
while (!first_writer.done && &first_writer != manifest_writers_.front()) {
|
|
first_writer.cv.Wait();
|
|
}
|
|
if (first_writer.done) {
|
|
// All non-CF-manipulation operations can be grouped together and committed
|
|
// to MANIFEST. They should all have finished. The status code is stored in
|
|
// the first manifest writer.
|
|
#ifndef NDEBUG
|
|
for (const auto& writer : writers) {
|
|
assert(writer.done);
|
|
}
|
|
#endif /* !NDEBUG */
|
|
return first_writer.status;
|
|
}
|
|
|
|
int num_undropped_cfds = 0;
|
|
for (auto cfd : column_family_datas) {
|
|
// if cfd == nullptr, it is a column family add.
|
|
if (cfd == nullptr || !cfd->IsDropped()) {
|
|
++num_undropped_cfds;
|
|
}
|
|
}
|
|
if (0 == num_undropped_cfds) {
|
|
// TODO (yanqin) maybe use a different status code to denote column family
|
|
// drop other than OK and ShutdownInProgress
|
|
for (int i = 0; i != num_cfds; ++i) {
|
|
manifest_writers_.pop_front();
|
|
}
|
|
// Notify new head of manifest write queue.
|
|
if (!manifest_writers_.empty()) {
|
|
manifest_writers_.front()->cv.Signal();
|
|
}
|
|
return Status::OK();
|
|
}
|
|
|
|
return ProcessManifestWrites(writers, mu, db_directory, new_descriptor_log,
|
|
new_cf_options);
|
|
}
|
|
|
|
void VersionSet::LogAndApplyCFHelper(VersionEdit* edit) {
|
|
assert(edit->IsColumnFamilyManipulation());
|
|
edit->SetNextFile(next_file_number_.load());
|
|
// The log might have data that is not visible to memtbale and hence have not
|
|
// updated the last_sequence_ yet. It is also possible that the log has is
|
|
// expecting some new data that is not written yet. Since LastSequence is an
|
|
// upper bound on the sequence, it is ok to record
|
|
// last_allocated_sequence_ as the last sequence.
|
|
edit->SetLastSequence(db_options_->two_write_queues ? last_allocated_sequence_
|
|
: last_sequence_);
|
|
if (edit->is_column_family_drop_) {
|
|
// if we drop column family, we have to make sure to save max column family,
|
|
// so that we don't reuse existing ID
|
|
edit->SetMaxColumnFamily(column_family_set_->GetMaxColumnFamily());
|
|
}
|
|
}
|
|
|
|
void VersionSet::LogAndApplyHelper(ColumnFamilyData* cfd,
|
|
VersionBuilder* builder, Version* /*v*/,
|
|
VersionEdit* edit, InstrumentedMutex* mu) {
|
|
#ifdef NDEBUG
|
|
(void)cfd;
|
|
#endif
|
|
mu->AssertHeld();
|
|
assert(!edit->IsColumnFamilyManipulation());
|
|
|
|
if (edit->has_log_number_) {
|
|
assert(edit->log_number_ >= cfd->GetLogNumber());
|
|
assert(edit->log_number_ < next_file_number_.load());
|
|
}
|
|
|
|
if (!edit->has_prev_log_number_) {
|
|
edit->SetPrevLogNumber(prev_log_number_);
|
|
}
|
|
edit->SetNextFile(next_file_number_.load());
|
|
// The log might have data that is not visible to memtbale and hence have not
|
|
// updated the last_sequence_ yet. It is also possible that the log has is
|
|
// expecting some new data that is not written yet. Since LastSequence is an
|
|
// upper bound on the sequence, it is ok to record
|
|
// last_allocated_sequence_ as the last sequence.
|
|
edit->SetLastSequence(db_options_->two_write_queues ? last_allocated_sequence_
|
|
: last_sequence_);
|
|
|
|
builder->Apply(edit);
|
|
}
|
|
|
|
Status VersionSet::ApplyOneVersionEdit(
|
|
VersionEdit& edit,
|
|
const std::unordered_map<std::string, ColumnFamilyOptions>& name_to_options,
|
|
std::unordered_map<int, std::string>& column_families_not_found,
|
|
std::unordered_map<uint32_t, BaseReferencedVersionBuilder*>& builders,
|
|
bool* have_log_number, uint64_t* /* log_number */,
|
|
bool* have_prev_log_number, uint64_t* previous_log_number,
|
|
bool* have_next_file, uint64_t* next_file, bool* have_last_sequence,
|
|
SequenceNumber* last_sequence, uint64_t* min_log_number_to_keep,
|
|
uint32_t* max_column_family) {
|
|
// Not found means that user didn't supply that column
|
|
// family option AND we encountered column family add
|
|
// record. Once we encounter column family drop record,
|
|
// we will delete the column family from
|
|
// column_families_not_found.
|
|
bool cf_in_not_found = (column_families_not_found.find(edit.column_family_) !=
|
|
column_families_not_found.end());
|
|
// in builders means that user supplied that column family
|
|
// option AND that we encountered column family add record
|
|
bool cf_in_builders = builders.find(edit.column_family_) != builders.end();
|
|
|
|
// they can't both be true
|
|
assert(!(cf_in_not_found && cf_in_builders));
|
|
|
|
ColumnFamilyData* cfd = nullptr;
|
|
|
|
if (edit.is_column_family_add_) {
|
|
if (cf_in_builders || cf_in_not_found) {
|
|
return Status::Corruption(
|
|
"Manifest adding the same column family twice: " +
|
|
edit.column_family_name_);
|
|
}
|
|
auto cf_options = name_to_options.find(edit.column_family_name_);
|
|
if (cf_options == name_to_options.end()) {
|
|
column_families_not_found.insert(
|
|
{edit.column_family_, edit.column_family_name_});
|
|
} else {
|
|
cfd = CreateColumnFamily(cf_options->second, &edit);
|
|
cfd->set_initialized();
|
|
builders.insert(
|
|
{edit.column_family_, new BaseReferencedVersionBuilder(cfd)});
|
|
}
|
|
} else if (edit.is_column_family_drop_) {
|
|
if (cf_in_builders) {
|
|
auto builder = builders.find(edit.column_family_);
|
|
assert(builder != builders.end());
|
|
delete builder->second;
|
|
builders.erase(builder);
|
|
cfd = column_family_set_->GetColumnFamily(edit.column_family_);
|
|
assert(cfd != nullptr);
|
|
if (cfd->Unref()) {
|
|
delete cfd;
|
|
cfd = nullptr;
|
|
} else {
|
|
// who else can have reference to cfd!?
|
|
assert(false);
|
|
}
|
|
} else if (cf_in_not_found) {
|
|
column_families_not_found.erase(edit.column_family_);
|
|
} else {
|
|
return Status::Corruption(
|
|
"Manifest - dropping non-existing column family");
|
|
}
|
|
} else if (!cf_in_not_found) {
|
|
if (!cf_in_builders) {
|
|
return Status::Corruption(
|
|
"Manifest record referencing unknown column family");
|
|
}
|
|
|
|
cfd = column_family_set_->GetColumnFamily(edit.column_family_);
|
|
// this should never happen since cf_in_builders is true
|
|
assert(cfd != nullptr);
|
|
|
|
// if it is not column family add or column family drop,
|
|
// then it's a file add/delete, which should be forwarded
|
|
// to builder
|
|
auto builder = builders.find(edit.column_family_);
|
|
assert(builder != builders.end());
|
|
builder->second->version_builder()->Apply(&edit);
|
|
}
|
|
|
|
if (cfd != nullptr) {
|
|
if (edit.has_log_number_) {
|
|
if (cfd->GetLogNumber() > edit.log_number_) {
|
|
ROCKS_LOG_WARN(
|
|
db_options_->info_log,
|
|
"MANIFEST corruption detected, but ignored - Log numbers in "
|
|
"records NOT monotonically increasing");
|
|
} else {
|
|
cfd->SetLogNumber(edit.log_number_);
|
|
*have_log_number = true;
|
|
}
|
|
}
|
|
if (edit.has_comparator_ &&
|
|
edit.comparator_ != cfd->user_comparator()->Name()) {
|
|
return Status::InvalidArgument(
|
|
cfd->user_comparator()->Name(),
|
|
"does not match existing comparator " + edit.comparator_);
|
|
}
|
|
}
|
|
|
|
if (edit.has_prev_log_number_) {
|
|
*previous_log_number = edit.prev_log_number_;
|
|
*have_prev_log_number = true;
|
|
}
|
|
|
|
if (edit.has_next_file_number_) {
|
|
*next_file = edit.next_file_number_;
|
|
*have_next_file = true;
|
|
}
|
|
|
|
if (edit.has_max_column_family_) {
|
|
*max_column_family = edit.max_column_family_;
|
|
}
|
|
|
|
if (edit.has_min_log_number_to_keep_) {
|
|
*min_log_number_to_keep =
|
|
std::max(*min_log_number_to_keep, edit.min_log_number_to_keep_);
|
|
}
|
|
|
|
if (edit.has_last_sequence_) {
|
|
*last_sequence = edit.last_sequence_;
|
|
*have_last_sequence = true;
|
|
}
|
|
return Status::OK();
|
|
}
|
|
|
|
Status VersionSet::Recover(
|
|
const std::vector<ColumnFamilyDescriptor>& column_families,
|
|
bool read_only) {
|
|
std::unordered_map<std::string, ColumnFamilyOptions> cf_name_to_options;
|
|
for (auto cf : column_families) {
|
|
cf_name_to_options.insert({cf.name, cf.options});
|
|
}
|
|
// keeps track of column families in manifest that were not found in
|
|
// column families parameters. if those column families are not dropped
|
|
// by subsequent manifest records, Recover() will return failure status
|
|
std::unordered_map<int, std::string> column_families_not_found;
|
|
|
|
// Read "CURRENT" file, which contains a pointer to the current manifest file
|
|
std::string manifest_filename;
|
|
Status s = ReadFileToString(
|
|
env_, CurrentFileName(dbname_), &manifest_filename
|
|
);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
if (manifest_filename.empty() ||
|
|
manifest_filename.back() != '\n') {
|
|
return Status::Corruption("CURRENT file does not end with newline");
|
|
}
|
|
// remove the trailing '\n'
|
|
manifest_filename.resize(manifest_filename.size() - 1);
|
|
FileType type;
|
|
bool parse_ok =
|
|
ParseFileName(manifest_filename, &manifest_file_number_, &type);
|
|
if (!parse_ok || type != kDescriptorFile) {
|
|
return Status::Corruption("CURRENT file corrupted");
|
|
}
|
|
|
|
ROCKS_LOG_INFO(db_options_->info_log, "Recovering from manifest file: %s\n",
|
|
manifest_filename.c_str());
|
|
|
|
manifest_filename = dbname_ + "/" + manifest_filename;
|
|
unique_ptr<SequentialFileReader> manifest_file_reader;
|
|
{
|
|
unique_ptr<SequentialFile> manifest_file;
|
|
s = env_->NewSequentialFile(manifest_filename, &manifest_file,
|
|
env_->OptimizeForManifestRead(env_options_));
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
manifest_file_reader.reset(
|
|
new SequentialFileReader(std::move(manifest_file), manifest_filename));
|
|
}
|
|
uint64_t current_manifest_file_size;
|
|
s = env_->GetFileSize(manifest_filename, ¤t_manifest_file_size);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
|
|
bool have_log_number = false;
|
|
bool have_prev_log_number = false;
|
|
bool have_next_file = false;
|
|
bool have_last_sequence = false;
|
|
uint64_t next_file = 0;
|
|
uint64_t last_sequence = 0;
|
|
uint64_t log_number = 0;
|
|
uint64_t previous_log_number = 0;
|
|
uint32_t max_column_family = 0;
|
|
uint64_t min_log_number_to_keep = 0;
|
|
std::unordered_map<uint32_t, BaseReferencedVersionBuilder*> builders;
|
|
|
|
// add default column family
|
|
auto default_cf_iter = cf_name_to_options.find(kDefaultColumnFamilyName);
|
|
if (default_cf_iter == cf_name_to_options.end()) {
|
|
return Status::InvalidArgument("Default column family not specified");
|
|
}
|
|
VersionEdit default_cf_edit;
|
|
default_cf_edit.AddColumnFamily(kDefaultColumnFamilyName);
|
|
default_cf_edit.SetColumnFamily(0);
|
|
ColumnFamilyData* default_cfd =
|
|
CreateColumnFamily(default_cf_iter->second, &default_cf_edit);
|
|
// In recovery, nobody else can access it, so it's fine to set it to be
|
|
// initialized earlier.
|
|
default_cfd->set_initialized();
|
|
builders.insert({0, new BaseReferencedVersionBuilder(default_cfd)});
|
|
|
|
{
|
|
VersionSet::LogReporter reporter;
|
|
reporter.status = &s;
|
|
log::Reader reader(nullptr, std::move(manifest_file_reader), &reporter,
|
|
true /* checksum */, 0 /* log_number */,
|
|
false /* retry_after_eof */);
|
|
Slice record;
|
|
std::string scratch;
|
|
std::vector<VersionEdit> replay_buffer;
|
|
size_t num_entries_decoded = 0;
|
|
while (reader.ReadRecord(&record, &scratch) && s.ok()) {
|
|
VersionEdit edit;
|
|
s = edit.DecodeFrom(record);
|
|
if (!s.ok()) {
|
|
break;
|
|
}
|
|
|
|
if (edit.is_in_atomic_group_) {
|
|
if (replay_buffer.empty()) {
|
|
replay_buffer.resize(edit.remaining_entries_ + 1);
|
|
}
|
|
++num_entries_decoded;
|
|
if (num_entries_decoded + edit.remaining_entries_ !=
|
|
static_cast<uint32_t>(replay_buffer.size())) {
|
|
return Status::Corruption("corrupted atomic group");
|
|
}
|
|
replay_buffer[num_entries_decoded - 1] = std::move(edit);
|
|
if (num_entries_decoded == replay_buffer.size()) {
|
|
for (auto& e : replay_buffer) {
|
|
s = ApplyOneVersionEdit(
|
|
e, cf_name_to_options, column_families_not_found, builders,
|
|
&have_log_number, &log_number, &have_prev_log_number,
|
|
&previous_log_number, &have_next_file, &next_file,
|
|
&have_last_sequence, &last_sequence, &min_log_number_to_keep,
|
|
&max_column_family);
|
|
if (!s.ok()) {
|
|
break;
|
|
}
|
|
}
|
|
replay_buffer.clear();
|
|
num_entries_decoded = 0;
|
|
}
|
|
} else {
|
|
if (!replay_buffer.empty()) {
|
|
return Status::Corruption("corrupted atomic group");
|
|
}
|
|
s = ApplyOneVersionEdit(
|
|
edit, cf_name_to_options, column_families_not_found, builders,
|
|
&have_log_number, &log_number, &have_prev_log_number,
|
|
&previous_log_number, &have_next_file, &next_file,
|
|
&have_last_sequence, &last_sequence, &min_log_number_to_keep,
|
|
&max_column_family);
|
|
}
|
|
if (!s.ok()) {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (s.ok()) {
|
|
if (!have_next_file) {
|
|
s = Status::Corruption("no meta-nextfile entry in descriptor");
|
|
} else if (!have_log_number) {
|
|
s = Status::Corruption("no meta-lognumber entry in descriptor");
|
|
} else if (!have_last_sequence) {
|
|
s = Status::Corruption("no last-sequence-number entry in descriptor");
|
|
}
|
|
|
|
if (!have_prev_log_number) {
|
|
previous_log_number = 0;
|
|
}
|
|
|
|
column_family_set_->UpdateMaxColumnFamily(max_column_family);
|
|
|
|
// When reading DB generated using old release, min_log_number_to_keep=0.
|
|
// All log files will be scanned for potential prepare entries.
|
|
MarkMinLogNumberToKeep2PC(min_log_number_to_keep);
|
|
MarkFileNumberUsed(previous_log_number);
|
|
MarkFileNumberUsed(log_number);
|
|
}
|
|
|
|
// there were some column families in the MANIFEST that weren't specified
|
|
// in the argument. This is OK in read_only mode
|
|
if (read_only == false && !column_families_not_found.empty()) {
|
|
std::string list_of_not_found;
|
|
for (const auto& cf : column_families_not_found) {
|
|
list_of_not_found += ", " + cf.second;
|
|
}
|
|
list_of_not_found = list_of_not_found.substr(2);
|
|
s = Status::InvalidArgument(
|
|
"You have to open all column families. Column families not opened: " +
|
|
list_of_not_found);
|
|
}
|
|
|
|
if (s.ok()) {
|
|
for (auto cfd : *column_family_set_) {
|
|
assert(builders.count(cfd->GetID()) > 0);
|
|
auto* builder = builders[cfd->GetID()]->version_builder();
|
|
if (!builder->CheckConsistencyForNumLevels()) {
|
|
s = Status::InvalidArgument(
|
|
"db has more levels than options.num_levels");
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (s.ok()) {
|
|
for (auto cfd : *column_family_set_) {
|
|
if (cfd->IsDropped()) {
|
|
continue;
|
|
}
|
|
if (read_only) {
|
|
cfd->table_cache()->SetTablesAreImmortal();
|
|
}
|
|
assert(cfd->initialized());
|
|
auto builders_iter = builders.find(cfd->GetID());
|
|
assert(builders_iter != builders.end());
|
|
auto* builder = builders_iter->second->version_builder();
|
|
|
|
if (GetColumnFamilySet()->get_table_cache()->GetCapacity() ==
|
|
TableCache::kInfiniteCapacity) {
|
|
// unlimited table cache. Pre-load table handle now.
|
|
// Need to do it out of the mutex.
|
|
builder->LoadTableHandlers(
|
|
cfd->internal_stats(), db_options_->max_file_opening_threads,
|
|
false /* prefetch_index_and_filter_in_cache */,
|
|
cfd->GetLatestMutableCFOptions()->prefix_extractor.get());
|
|
}
|
|
|
|
Version* v = new Version(cfd, this, env_options_,
|
|
*cfd->GetLatestMutableCFOptions(),
|
|
current_version_number_++);
|
|
builder->SaveTo(v->storage_info());
|
|
|
|
// Install recovered version
|
|
v->PrepareApply(*cfd->GetLatestMutableCFOptions(),
|
|
!(db_options_->skip_stats_update_on_db_open));
|
|
AppendVersion(cfd, v);
|
|
}
|
|
|
|
manifest_file_size_ = current_manifest_file_size;
|
|
next_file_number_.store(next_file + 1);
|
|
last_allocated_sequence_ = last_sequence;
|
|
last_published_sequence_ = last_sequence;
|
|
last_sequence_ = last_sequence;
|
|
prev_log_number_ = previous_log_number;
|
|
|
|
ROCKS_LOG_INFO(
|
|
db_options_->info_log,
|
|
"Recovered from manifest file:%s succeeded,"
|
|
"manifest_file_number is %lu, next_file_number is %lu, "
|
|
"last_sequence is %lu, log_number is %lu,"
|
|
"prev_log_number is %lu,"
|
|
"max_column_family is %u,"
|
|
"min_log_number_to_keep is %lu\n",
|
|
manifest_filename.c_str(), (unsigned long)manifest_file_number_,
|
|
(unsigned long)next_file_number_.load(), (unsigned long)last_sequence_,
|
|
(unsigned long)log_number, (unsigned long)prev_log_number_,
|
|
column_family_set_->GetMaxColumnFamily(), min_log_number_to_keep_2pc());
|
|
|
|
for (auto cfd : *column_family_set_) {
|
|
if (cfd->IsDropped()) {
|
|
continue;
|
|
}
|
|
ROCKS_LOG_INFO(db_options_->info_log,
|
|
"Column family [%s] (ID %u), log number is %" PRIu64 "\n",
|
|
cfd->GetName().c_str(), cfd->GetID(), cfd->GetLogNumber());
|
|
}
|
|
}
|
|
|
|
for (auto& builder : builders) {
|
|
delete builder.second;
|
|
}
|
|
|
|
return s;
|
|
}
|
|
|
|
Status VersionSet::ListColumnFamilies(std::vector<std::string>* column_families,
|
|
const std::string& dbname, Env* env) {
|
|
// these are just for performance reasons, not correcntes,
|
|
// so we're fine using the defaults
|
|
EnvOptions soptions;
|
|
// Read "CURRENT" file, which contains a pointer to the current manifest file
|
|
std::string current;
|
|
Status s = ReadFileToString(env, CurrentFileName(dbname), ¤t);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
if (current.empty() || current[current.size()-1] != '\n') {
|
|
return Status::Corruption("CURRENT file does not end with newline");
|
|
}
|
|
current.resize(current.size() - 1);
|
|
|
|
std::string dscname = dbname + "/" + current;
|
|
|
|
unique_ptr<SequentialFileReader> file_reader;
|
|
{
|
|
unique_ptr<SequentialFile> file;
|
|
s = env->NewSequentialFile(dscname, &file, soptions);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
file_reader.reset(new SequentialFileReader(std::move(file), dscname));
|
|
}
|
|
|
|
std::map<uint32_t, std::string> column_family_names;
|
|
// default column family is always implicitly there
|
|
column_family_names.insert({0, kDefaultColumnFamilyName});
|
|
VersionSet::LogReporter reporter;
|
|
reporter.status = &s;
|
|
log::Reader reader(nullptr, std::move(file_reader), &reporter,
|
|
true /* checksum */, 0 /* log_number */,
|
|
false /* retry_after_eof */);
|
|
Slice record;
|
|
std::string scratch;
|
|
while (reader.ReadRecord(&record, &scratch) && s.ok()) {
|
|
VersionEdit edit;
|
|
s = edit.DecodeFrom(record);
|
|
if (!s.ok()) {
|
|
break;
|
|
}
|
|
if (edit.is_column_family_add_) {
|
|
if (column_family_names.find(edit.column_family_) !=
|
|
column_family_names.end()) {
|
|
s = Status::Corruption("Manifest adding the same column family twice");
|
|
break;
|
|
}
|
|
column_family_names.insert(
|
|
{edit.column_family_, edit.column_family_name_});
|
|
} else if (edit.is_column_family_drop_) {
|
|
if (column_family_names.find(edit.column_family_) ==
|
|
column_family_names.end()) {
|
|
s = Status::Corruption(
|
|
"Manifest - dropping non-existing column family");
|
|
break;
|
|
}
|
|
column_family_names.erase(edit.column_family_);
|
|
}
|
|
}
|
|
|
|
column_families->clear();
|
|
if (s.ok()) {
|
|
for (const auto& iter : column_family_names) {
|
|
column_families->push_back(iter.second);
|
|
}
|
|
}
|
|
|
|
return s;
|
|
}
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
Status VersionSet::ReduceNumberOfLevels(const std::string& dbname,
|
|
const Options* options,
|
|
const EnvOptions& env_options,
|
|
int new_levels) {
|
|
if (new_levels <= 1) {
|
|
return Status::InvalidArgument(
|
|
"Number of levels needs to be bigger than 1");
|
|
}
|
|
|
|
ImmutableDBOptions db_options(*options);
|
|
ColumnFamilyOptions cf_options(*options);
|
|
std::shared_ptr<Cache> tc(NewLRUCache(options->max_open_files - 10,
|
|
options->table_cache_numshardbits));
|
|
WriteController wc(options->delayed_write_rate);
|
|
WriteBufferManager wb(options->db_write_buffer_size);
|
|
VersionSet versions(dbname, &db_options, env_options, tc.get(), &wb, &wc);
|
|
Status status;
|
|
|
|
std::vector<ColumnFamilyDescriptor> dummy;
|
|
ColumnFamilyDescriptor dummy_descriptor(kDefaultColumnFamilyName,
|
|
ColumnFamilyOptions(*options));
|
|
dummy.push_back(dummy_descriptor);
|
|
status = versions.Recover(dummy);
|
|
if (!status.ok()) {
|
|
return status;
|
|
}
|
|
|
|
Version* current_version =
|
|
versions.GetColumnFamilySet()->GetDefault()->current();
|
|
auto* vstorage = current_version->storage_info();
|
|
int current_levels = vstorage->num_levels();
|
|
|
|
if (current_levels <= new_levels) {
|
|
return Status::OK();
|
|
}
|
|
|
|
// Make sure there are file only on one level from
|
|
// (new_levels-1) to (current_levels-1)
|
|
int first_nonempty_level = -1;
|
|
int first_nonempty_level_filenum = 0;
|
|
for (int i = new_levels - 1; i < current_levels; i++) {
|
|
int file_num = vstorage->NumLevelFiles(i);
|
|
if (file_num != 0) {
|
|
if (first_nonempty_level < 0) {
|
|
first_nonempty_level = i;
|
|
first_nonempty_level_filenum = file_num;
|
|
} else {
|
|
char msg[255];
|
|
snprintf(msg, sizeof(msg),
|
|
"Found at least two levels containing files: "
|
|
"[%d:%d],[%d:%d].\n",
|
|
first_nonempty_level, first_nonempty_level_filenum, i,
|
|
file_num);
|
|
return Status::InvalidArgument(msg);
|
|
}
|
|
}
|
|
}
|
|
|
|
// we need to allocate an array with the old number of levels size to
|
|
// avoid SIGSEGV in WriteSnapshot()
|
|
// however, all levels bigger or equal to new_levels will be empty
|
|
std::vector<FileMetaData*>* new_files_list =
|
|
new std::vector<FileMetaData*>[current_levels];
|
|
for (int i = 0; i < new_levels - 1; i++) {
|
|
new_files_list[i] = vstorage->LevelFiles(i);
|
|
}
|
|
|
|
if (first_nonempty_level > 0) {
|
|
new_files_list[new_levels - 1] = vstorage->LevelFiles(first_nonempty_level);
|
|
}
|
|
|
|
delete[] vstorage -> files_;
|
|
vstorage->files_ = new_files_list;
|
|
vstorage->num_levels_ = new_levels;
|
|
|
|
MutableCFOptions mutable_cf_options(*options);
|
|
VersionEdit ve;
|
|
InstrumentedMutex dummy_mutex;
|
|
InstrumentedMutexLock l(&dummy_mutex);
|
|
return versions.LogAndApply(
|
|
versions.GetColumnFamilySet()->GetDefault(),
|
|
mutable_cf_options, &ve, &dummy_mutex, nullptr, true);
|
|
}
|
|
|
|
Status VersionSet::DumpManifest(Options& options, std::string& dscname,
|
|
bool verbose, bool hex, bool json) {
|
|
// Open the specified manifest file.
|
|
unique_ptr<SequentialFileReader> file_reader;
|
|
Status s;
|
|
{
|
|
unique_ptr<SequentialFile> file;
|
|
s = options.env->NewSequentialFile(
|
|
dscname, &file, env_->OptimizeForManifestRead(env_options_));
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
file_reader.reset(new SequentialFileReader(std::move(file), dscname));
|
|
}
|
|
|
|
bool have_prev_log_number = false;
|
|
bool have_next_file = false;
|
|
bool have_last_sequence = false;
|
|
uint64_t next_file = 0;
|
|
uint64_t last_sequence = 0;
|
|
uint64_t previous_log_number = 0;
|
|
int count = 0;
|
|
std::unordered_map<uint32_t, std::string> comparators;
|
|
std::unordered_map<uint32_t, BaseReferencedVersionBuilder*> builders;
|
|
|
|
// add default column family
|
|
VersionEdit default_cf_edit;
|
|
default_cf_edit.AddColumnFamily(kDefaultColumnFamilyName);
|
|
default_cf_edit.SetColumnFamily(0);
|
|
ColumnFamilyData* default_cfd =
|
|
CreateColumnFamily(ColumnFamilyOptions(options), &default_cf_edit);
|
|
builders.insert({0, new BaseReferencedVersionBuilder(default_cfd)});
|
|
|
|
{
|
|
VersionSet::LogReporter reporter;
|
|
reporter.status = &s;
|
|
log::Reader reader(nullptr, std::move(file_reader), &reporter,
|
|
true /* checksum */, 0 /* log_number */,
|
|
false /* retry_after_eof */);
|
|
Slice record;
|
|
std::string scratch;
|
|
while (reader.ReadRecord(&record, &scratch) && s.ok()) {
|
|
VersionEdit edit;
|
|
s = edit.DecodeFrom(record);
|
|
if (!s.ok()) {
|
|
break;
|
|
}
|
|
|
|
// Write out each individual edit
|
|
if (verbose && !json) {
|
|
printf("%s\n", edit.DebugString(hex).c_str());
|
|
} else if (json) {
|
|
printf("%s\n", edit.DebugJSON(count, hex).c_str());
|
|
}
|
|
count++;
|
|
|
|
bool cf_in_builders =
|
|
builders.find(edit.column_family_) != builders.end();
|
|
|
|
if (edit.has_comparator_) {
|
|
comparators.insert({edit.column_family_, edit.comparator_});
|
|
}
|
|
|
|
ColumnFamilyData* cfd = nullptr;
|
|
|
|
if (edit.is_column_family_add_) {
|
|
if (cf_in_builders) {
|
|
s = Status::Corruption(
|
|
"Manifest adding the same column family twice");
|
|
break;
|
|
}
|
|
cfd = CreateColumnFamily(ColumnFamilyOptions(options), &edit);
|
|
cfd->set_initialized();
|
|
builders.insert(
|
|
{edit.column_family_, new BaseReferencedVersionBuilder(cfd)});
|
|
} else if (edit.is_column_family_drop_) {
|
|
if (!cf_in_builders) {
|
|
s = Status::Corruption(
|
|
"Manifest - dropping non-existing column family");
|
|
break;
|
|
}
|
|
auto builder_iter = builders.find(edit.column_family_);
|
|
delete builder_iter->second;
|
|
builders.erase(builder_iter);
|
|
comparators.erase(edit.column_family_);
|
|
cfd = column_family_set_->GetColumnFamily(edit.column_family_);
|
|
assert(cfd != nullptr);
|
|
cfd->Unref();
|
|
delete cfd;
|
|
cfd = nullptr;
|
|
} else {
|
|
if (!cf_in_builders) {
|
|
s = Status::Corruption(
|
|
"Manifest record referencing unknown column family");
|
|
break;
|
|
}
|
|
|
|
cfd = column_family_set_->GetColumnFamily(edit.column_family_);
|
|
// this should never happen since cf_in_builders is true
|
|
assert(cfd != nullptr);
|
|
|
|
// if it is not column family add or column family drop,
|
|
// then it's a file add/delete, which should be forwarded
|
|
// to builder
|
|
auto builder = builders.find(edit.column_family_);
|
|
assert(builder != builders.end());
|
|
builder->second->version_builder()->Apply(&edit);
|
|
}
|
|
|
|
if (cfd != nullptr && edit.has_log_number_) {
|
|
cfd->SetLogNumber(edit.log_number_);
|
|
}
|
|
|
|
|
|
if (edit.has_prev_log_number_) {
|
|
previous_log_number = edit.prev_log_number_;
|
|
have_prev_log_number = true;
|
|
}
|
|
|
|
if (edit.has_next_file_number_) {
|
|
next_file = edit.next_file_number_;
|
|
have_next_file = true;
|
|
}
|
|
|
|
if (edit.has_last_sequence_) {
|
|
last_sequence = edit.last_sequence_;
|
|
have_last_sequence = true;
|
|
}
|
|
|
|
if (edit.has_max_column_family_) {
|
|
column_family_set_->UpdateMaxColumnFamily(edit.max_column_family_);
|
|
}
|
|
|
|
if (edit.has_min_log_number_to_keep_) {
|
|
MarkMinLogNumberToKeep2PC(edit.min_log_number_to_keep_);
|
|
}
|
|
}
|
|
}
|
|
file_reader.reset();
|
|
|
|
if (s.ok()) {
|
|
if (!have_next_file) {
|
|
s = Status::Corruption("no meta-nextfile entry in descriptor");
|
|
printf("no meta-nextfile entry in descriptor");
|
|
} else if (!have_last_sequence) {
|
|
printf("no last-sequence-number entry in descriptor");
|
|
s = Status::Corruption("no last-sequence-number entry in descriptor");
|
|
}
|
|
|
|
if (!have_prev_log_number) {
|
|
previous_log_number = 0;
|
|
}
|
|
}
|
|
|
|
if (s.ok()) {
|
|
for (auto cfd : *column_family_set_) {
|
|
if (cfd->IsDropped()) {
|
|
continue;
|
|
}
|
|
auto builders_iter = builders.find(cfd->GetID());
|
|
assert(builders_iter != builders.end());
|
|
auto builder = builders_iter->second->version_builder();
|
|
|
|
Version* v = new Version(cfd, this, env_options_,
|
|
*cfd->GetLatestMutableCFOptions(),
|
|
current_version_number_++);
|
|
builder->SaveTo(v->storage_info());
|
|
v->PrepareApply(*cfd->GetLatestMutableCFOptions(), false);
|
|
|
|
printf("--------------- Column family \"%s\" (ID %u) --------------\n",
|
|
cfd->GetName().c_str(), (unsigned int)cfd->GetID());
|
|
printf("log number: %lu\n", (unsigned long)cfd->GetLogNumber());
|
|
auto comparator = comparators.find(cfd->GetID());
|
|
if (comparator != comparators.end()) {
|
|
printf("comparator: %s\n", comparator->second.c_str());
|
|
} else {
|
|
printf("comparator: <NO COMPARATOR>\n");
|
|
}
|
|
printf("%s \n", v->DebugString(hex).c_str());
|
|
delete v;
|
|
}
|
|
|
|
// Free builders
|
|
for (auto& builder : builders) {
|
|
delete builder.second;
|
|
}
|
|
|
|
next_file_number_.store(next_file + 1);
|
|
last_allocated_sequence_ = last_sequence;
|
|
last_published_sequence_ = last_sequence;
|
|
last_sequence_ = last_sequence;
|
|
prev_log_number_ = previous_log_number;
|
|
|
|
printf(
|
|
"next_file_number %lu last_sequence "
|
|
"%lu prev_log_number %lu max_column_family %u min_log_number_to_keep "
|
|
"%" PRIu64 "\n",
|
|
(unsigned long)next_file_number_.load(), (unsigned long)last_sequence,
|
|
(unsigned long)previous_log_number,
|
|
column_family_set_->GetMaxColumnFamily(), min_log_number_to_keep_2pc());
|
|
}
|
|
|
|
return s;
|
|
}
|
|
#endif // ROCKSDB_LITE
|
|
|
|
void VersionSet::MarkFileNumberUsed(uint64_t number) {
|
|
// only called during recovery and repair which are single threaded, so this
|
|
// works because there can't be concurrent calls
|
|
if (next_file_number_.load(std::memory_order_relaxed) <= number) {
|
|
next_file_number_.store(number + 1, std::memory_order_relaxed);
|
|
}
|
|
}
|
|
|
|
// Called only either from ::LogAndApply which is protected by mutex or during
|
|
// recovery which is single-threaded.
|
|
void VersionSet::MarkMinLogNumberToKeep2PC(uint64_t number) {
|
|
if (min_log_number_to_keep_2pc_.load(std::memory_order_relaxed) < number) {
|
|
min_log_number_to_keep_2pc_.store(number, std::memory_order_relaxed);
|
|
}
|
|
}
|
|
|
|
Status VersionSet::WriteSnapshot(log::Writer* log) {
|
|
// TODO: Break up into multiple records to reduce memory usage on recovery?
|
|
|
|
// WARNING: This method doesn't hold a mutex!!
|
|
|
|
// This is done without DB mutex lock held, but only within single-threaded
|
|
// LogAndApply. Column family manipulations can only happen within LogAndApply
|
|
// (the same single thread), so we're safe to iterate.
|
|
for (auto cfd : *column_family_set_) {
|
|
if (cfd->IsDropped()) {
|
|
continue;
|
|
}
|
|
assert(cfd->initialized());
|
|
{
|
|
// Store column family info
|
|
VersionEdit edit;
|
|
if (cfd->GetID() != 0) {
|
|
// default column family is always there,
|
|
// no need to explicitly write it
|
|
edit.AddColumnFamily(cfd->GetName());
|
|
edit.SetColumnFamily(cfd->GetID());
|
|
}
|
|
edit.SetComparatorName(
|
|
cfd->internal_comparator().user_comparator()->Name());
|
|
std::string record;
|
|
if (!edit.EncodeTo(&record)) {
|
|
return Status::Corruption(
|
|
"Unable to Encode VersionEdit:" + edit.DebugString(true));
|
|
}
|
|
Status s = log->AddRecord(record);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
}
|
|
|
|
{
|
|
// Save files
|
|
VersionEdit edit;
|
|
edit.SetColumnFamily(cfd->GetID());
|
|
|
|
for (int level = 0; level < cfd->NumberLevels(); level++) {
|
|
for (const auto& f :
|
|
cfd->current()->storage_info()->LevelFiles(level)) {
|
|
edit.AddFile(level, f->fd.GetNumber(), f->fd.GetPathId(),
|
|
f->fd.GetFileSize(), f->smallest, f->largest,
|
|
f->fd.smallest_seqno, f->fd.largest_seqno,
|
|
f->marked_for_compaction);
|
|
}
|
|
}
|
|
edit.SetLogNumber(cfd->GetLogNumber());
|
|
std::string record;
|
|
if (!edit.EncodeTo(&record)) {
|
|
return Status::Corruption(
|
|
"Unable to Encode VersionEdit:" + edit.DebugString(true));
|
|
}
|
|
Status s = log->AddRecord(record);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
}
|
|
}
|
|
|
|
return Status::OK();
|
|
}
|
|
|
|
// TODO(aekmekji): in CompactionJob::GenSubcompactionBoundaries(), this
|
|
// function is called repeatedly with consecutive pairs of slices. For example
|
|
// if the slice list is [a, b, c, d] this function is called with arguments
|
|
// (a,b) then (b,c) then (c,d). Knowing this, an optimization is possible where
|
|
// we avoid doing binary search for the keys b and c twice and instead somehow
|
|
// maintain state of where they first appear in the files.
|
|
uint64_t VersionSet::ApproximateSize(Version* v, const Slice& start,
|
|
const Slice& end, int start_level,
|
|
int end_level) {
|
|
// pre-condition
|
|
assert(v->cfd_->internal_comparator().Compare(start, end) <= 0);
|
|
|
|
uint64_t size = 0;
|
|
const auto* vstorage = v->storage_info();
|
|
end_level = end_level == -1
|
|
? vstorage->num_non_empty_levels()
|
|
: std::min(end_level, vstorage->num_non_empty_levels());
|
|
|
|
assert(start_level <= end_level);
|
|
|
|
for (int level = start_level; level < end_level; level++) {
|
|
const LevelFilesBrief& files_brief = vstorage->LevelFilesBrief(level);
|
|
if (!files_brief.num_files) {
|
|
// empty level, skip exploration
|
|
continue;
|
|
}
|
|
|
|
if (!level) {
|
|
// level 0 data is sorted order, handle the use case explicitly
|
|
size += ApproximateSizeLevel0(v, files_brief, start, end);
|
|
continue;
|
|
}
|
|
|
|
assert(level > 0);
|
|
assert(files_brief.num_files > 0);
|
|
|
|
// identify the file position for starting key
|
|
const uint64_t idx_start = FindFileInRange(
|
|
v->cfd_->internal_comparator(), files_brief, start,
|
|
/*start=*/0, static_cast<uint32_t>(files_brief.num_files - 1));
|
|
assert(idx_start < files_brief.num_files);
|
|
|
|
// scan all files from the starting position until the ending position
|
|
// inferred from the sorted order
|
|
for (uint64_t i = idx_start; i < files_brief.num_files; i++) {
|
|
uint64_t val;
|
|
val = ApproximateSize(v, files_brief.files[i], end);
|
|
if (!val) {
|
|
// the files after this will not have the range
|
|
break;
|
|
}
|
|
|
|
size += val;
|
|
|
|
if (i == idx_start) {
|
|
// subtract the bytes needed to be scanned to get to the starting
|
|
// key
|
|
val = ApproximateSize(v, files_brief.files[i], start);
|
|
assert(size >= val);
|
|
size -= val;
|
|
}
|
|
}
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
uint64_t VersionSet::ApproximateSizeLevel0(Version* v,
|
|
const LevelFilesBrief& files_brief,
|
|
const Slice& key_start,
|
|
const Slice& key_end) {
|
|
// level 0 files are not in sorted order, we need to iterate through
|
|
// the list to compute the total bytes that require scanning
|
|
uint64_t size = 0;
|
|
for (size_t i = 0; i < files_brief.num_files; i++) {
|
|
const uint64_t start = ApproximateSize(v, files_brief.files[i], key_start);
|
|
const uint64_t end = ApproximateSize(v, files_brief.files[i], key_end);
|
|
assert(end >= start);
|
|
size += end - start;
|
|
}
|
|
return size;
|
|
}
|
|
|
|
uint64_t VersionSet::ApproximateSize(Version* v, const FdWithKeyRange& f,
|
|
const Slice& key) {
|
|
// pre-condition
|
|
assert(v);
|
|
|
|
uint64_t result = 0;
|
|
if (v->cfd_->internal_comparator().Compare(f.largest_key, key) <= 0) {
|
|
// Entire file is before "key", so just add the file size
|
|
result = f.fd.GetFileSize();
|
|
} else if (v->cfd_->internal_comparator().Compare(f.smallest_key, key) > 0) {
|
|
// Entire file is after "key", so ignore
|
|
result = 0;
|
|
} else {
|
|
// "key" falls in the range for this table. Add the
|
|
// approximate offset of "key" within the table.
|
|
TableReader* table_reader_ptr;
|
|
InternalIterator* iter = v->cfd_->table_cache()->NewIterator(
|
|
ReadOptions(), v->env_options_, v->cfd_->internal_comparator(),
|
|
*f.file_metadata, nullptr /* range_del_agg */,
|
|
v->GetMutableCFOptions().prefix_extractor.get(), &table_reader_ptr);
|
|
if (table_reader_ptr != nullptr) {
|
|
result = table_reader_ptr->ApproximateOffsetOf(key);
|
|
}
|
|
delete iter;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
void VersionSet::AddLiveFiles(std::vector<FileDescriptor>* live_list) {
|
|
// pre-calculate space requirement
|
|
int64_t total_files = 0;
|
|
for (auto cfd : *column_family_set_) {
|
|
if (!cfd->initialized()) {
|
|
continue;
|
|
}
|
|
Version* dummy_versions = cfd->dummy_versions();
|
|
for (Version* v = dummy_versions->next_; v != dummy_versions;
|
|
v = v->next_) {
|
|
const auto* vstorage = v->storage_info();
|
|
for (int level = 0; level < vstorage->num_levels(); level++) {
|
|
total_files += vstorage->LevelFiles(level).size();
|
|
}
|
|
}
|
|
}
|
|
|
|
// just one time extension to the right size
|
|
live_list->reserve(live_list->size() + static_cast<size_t>(total_files));
|
|
|
|
for (auto cfd : *column_family_set_) {
|
|
if (!cfd->initialized()) {
|
|
continue;
|
|
}
|
|
auto* current = cfd->current();
|
|
bool found_current = false;
|
|
Version* dummy_versions = cfd->dummy_versions();
|
|
for (Version* v = dummy_versions->next_; v != dummy_versions;
|
|
v = v->next_) {
|
|
v->AddLiveFiles(live_list);
|
|
if (v == current) {
|
|
found_current = true;
|
|
}
|
|
}
|
|
if (!found_current && current != nullptr) {
|
|
// Should never happen unless it is a bug.
|
|
assert(false);
|
|
current->AddLiveFiles(live_list);
|
|
}
|
|
}
|
|
}
|
|
|
|
InternalIterator* VersionSet::MakeInputIterator(
|
|
const Compaction* c, RangeDelAggregator* range_del_agg,
|
|
const EnvOptions& env_options_compactions) {
|
|
auto cfd = c->column_family_data();
|
|
ReadOptions read_options;
|
|
read_options.verify_checksums = true;
|
|
read_options.fill_cache = false;
|
|
// Compaction iterators shouldn't be confined to a single prefix.
|
|
// Compactions use Seek() for
|
|
// (a) concurrent compactions,
|
|
// (b) CompactionFilter::Decision::kRemoveAndSkipUntil.
|
|
read_options.total_order_seek = true;
|
|
|
|
// Level-0 files have to be merged together. For other levels,
|
|
// we will make a concatenating iterator per level.
|
|
// TODO(opt): use concatenating iterator for level-0 if there is no overlap
|
|
const size_t space = (c->level() == 0 ? c->input_levels(0)->num_files +
|
|
c->num_input_levels() - 1
|
|
: c->num_input_levels());
|
|
InternalIterator** list = new InternalIterator* [space];
|
|
size_t num = 0;
|
|
for (size_t which = 0; which < c->num_input_levels(); which++) {
|
|
if (c->input_levels(which)->num_files != 0) {
|
|
if (c->level(which) == 0) {
|
|
const LevelFilesBrief* flevel = c->input_levels(which);
|
|
for (size_t i = 0; i < flevel->num_files; i++) {
|
|
list[num++] = cfd->table_cache()->NewIterator(
|
|
read_options, env_options_compactions, cfd->internal_comparator(),
|
|
*flevel->files[i].file_metadata, range_del_agg,
|
|
c->mutable_cf_options()->prefix_extractor.get(),
|
|
nullptr /* table_reader_ptr */,
|
|
nullptr /* no per level latency histogram */,
|
|
true /* for_compaction */, nullptr /* arena */,
|
|
false /* skip_filters */, static_cast<int>(which) /* level */);
|
|
}
|
|
} else {
|
|
// Create concatenating iterator for the files from this level
|
|
list[num++] = new LevelIterator(
|
|
cfd->table_cache(), read_options, env_options_compactions,
|
|
cfd->internal_comparator(), c->input_levels(which),
|
|
c->mutable_cf_options()->prefix_extractor.get(),
|
|
false /* should_sample */,
|
|
nullptr /* no per level latency histogram */,
|
|
true /* for_compaction */, false /* skip_filters */,
|
|
static_cast<int>(which) /* level */, range_del_agg,
|
|
c->boundaries(which));
|
|
}
|
|
}
|
|
}
|
|
assert(num <= space);
|
|
InternalIterator* result =
|
|
NewMergingIterator(&c->column_family_data()->internal_comparator(), list,
|
|
static_cast<int>(num));
|
|
delete[] list;
|
|
return result;
|
|
}
|
|
|
|
// verify that the files listed in this compaction are present
|
|
// in the current version
|
|
bool VersionSet::VerifyCompactionFileConsistency(Compaction* c) {
|
|
#ifndef NDEBUG
|
|
Version* version = c->column_family_data()->current();
|
|
const VersionStorageInfo* vstorage = version->storage_info();
|
|
if (c->input_version() != version) {
|
|
ROCKS_LOG_INFO(
|
|
db_options_->info_log,
|
|
"[%s] compaction output being applied to a different base version from"
|
|
" input version",
|
|
c->column_family_data()->GetName().c_str());
|
|
|
|
if (vstorage->compaction_style_ == kCompactionStyleLevel &&
|
|
c->start_level() == 0 && c->num_input_levels() > 2U) {
|
|
// We are doing a L0->base_level compaction. The assumption is if
|
|
// base level is not L1, levels from L1 to base_level - 1 is empty.
|
|
// This is ensured by having one compaction from L0 going on at the
|
|
// same time in level-based compaction. So that during the time, no
|
|
// compaction/flush can put files to those levels.
|
|
for (int l = c->start_level() + 1; l < c->output_level(); l++) {
|
|
if (vstorage->NumLevelFiles(l) != 0) {
|
|
return false;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
for (size_t input = 0; input < c->num_input_levels(); ++input) {
|
|
int level = c->level(input);
|
|
for (size_t i = 0; i < c->num_input_files(input); ++i) {
|
|
uint64_t number = c->input(input, i)->fd.GetNumber();
|
|
bool found = false;
|
|
for (size_t j = 0; j < vstorage->files_[level].size(); j++) {
|
|
FileMetaData* f = vstorage->files_[level][j];
|
|
if (f->fd.GetNumber() == number) {
|
|
found = true;
|
|
break;
|
|
}
|
|
}
|
|
if (!found) {
|
|
return false; // input files non existent in current version
|
|
}
|
|
}
|
|
}
|
|
#else
|
|
(void)c;
|
|
#endif
|
|
return true; // everything good
|
|
}
|
|
|
|
Status VersionSet::GetMetadataForFile(uint64_t number, int* filelevel,
|
|
FileMetaData** meta,
|
|
ColumnFamilyData** cfd) {
|
|
for (auto cfd_iter : *column_family_set_) {
|
|
if (!cfd_iter->initialized()) {
|
|
continue;
|
|
}
|
|
Version* version = cfd_iter->current();
|
|
const auto* vstorage = version->storage_info();
|
|
for (int level = 0; level < vstorage->num_levels(); level++) {
|
|
for (const auto& file : vstorage->LevelFiles(level)) {
|
|
if (file->fd.GetNumber() == number) {
|
|
*meta = file;
|
|
*filelevel = level;
|
|
*cfd = cfd_iter;
|
|
return Status::OK();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return Status::NotFound("File not present in any level");
|
|
}
|
|
|
|
void VersionSet::GetLiveFilesMetaData(std::vector<LiveFileMetaData>* metadata) {
|
|
for (auto cfd : *column_family_set_) {
|
|
if (cfd->IsDropped() || !cfd->initialized()) {
|
|
continue;
|
|
}
|
|
for (int level = 0; level < cfd->NumberLevels(); level++) {
|
|
for (const auto& file :
|
|
cfd->current()->storage_info()->LevelFiles(level)) {
|
|
LiveFileMetaData filemetadata;
|
|
filemetadata.column_family_name = cfd->GetName();
|
|
uint32_t path_id = file->fd.GetPathId();
|
|
if (path_id < cfd->ioptions()->cf_paths.size()) {
|
|
filemetadata.db_path = cfd->ioptions()->cf_paths[path_id].path;
|
|
} else {
|
|
assert(!cfd->ioptions()->cf_paths.empty());
|
|
filemetadata.db_path = cfd->ioptions()->cf_paths.back().path;
|
|
}
|
|
filemetadata.name = MakeTableFileName("", file->fd.GetNumber());
|
|
filemetadata.level = level;
|
|
filemetadata.size = static_cast<size_t>(file->fd.GetFileSize());
|
|
filemetadata.smallestkey = file->smallest.user_key().ToString();
|
|
filemetadata.largestkey = file->largest.user_key().ToString();
|
|
filemetadata.smallest_seqno = file->fd.smallest_seqno;
|
|
filemetadata.largest_seqno = file->fd.largest_seqno;
|
|
metadata->push_back(filemetadata);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void VersionSet::GetObsoleteFiles(std::vector<ObsoleteFileInfo>* files,
|
|
std::vector<std::string>* manifest_filenames,
|
|
uint64_t min_pending_output) {
|
|
assert(manifest_filenames->empty());
|
|
obsolete_manifests_.swap(*manifest_filenames);
|
|
std::vector<ObsoleteFileInfo> pending_files;
|
|
for (auto& f : obsolete_files_) {
|
|
if (f.metadata->fd.GetNumber() < min_pending_output) {
|
|
files->push_back(std::move(f));
|
|
} else {
|
|
pending_files.push_back(std::move(f));
|
|
}
|
|
}
|
|
obsolete_files_.swap(pending_files);
|
|
}
|
|
|
|
ColumnFamilyData* VersionSet::CreateColumnFamily(
|
|
const ColumnFamilyOptions& cf_options, VersionEdit* edit) {
|
|
assert(edit->is_column_family_add_);
|
|
|
|
MutableCFOptions dummy_cf_options;
|
|
Version* dummy_versions =
|
|
new Version(nullptr, this, env_options_, dummy_cf_options);
|
|
// Ref() dummy version once so that later we can call Unref() to delete it
|
|
// by avoiding calling "delete" explicitly (~Version is private)
|
|
dummy_versions->Ref();
|
|
auto new_cfd = column_family_set_->CreateColumnFamily(
|
|
edit->column_family_name_, edit->column_family_, dummy_versions,
|
|
cf_options);
|
|
|
|
Version* v = new Version(new_cfd, this, env_options_,
|
|
*new_cfd->GetLatestMutableCFOptions(),
|
|
current_version_number_++);
|
|
|
|
// Fill level target base information.
|
|
v->storage_info()->CalculateBaseBytes(*new_cfd->ioptions(),
|
|
*new_cfd->GetLatestMutableCFOptions());
|
|
AppendVersion(new_cfd, v);
|
|
// GetLatestMutableCFOptions() is safe here without mutex since the
|
|
// cfd is not available to client
|
|
new_cfd->CreateNewMemtable(*new_cfd->GetLatestMutableCFOptions(),
|
|
LastSequence());
|
|
new_cfd->SetLogNumber(edit->log_number_);
|
|
return new_cfd;
|
|
}
|
|
|
|
uint64_t VersionSet::GetNumLiveVersions(Version* dummy_versions) {
|
|
uint64_t count = 0;
|
|
for (Version* v = dummy_versions->next_; v != dummy_versions; v = v->next_) {
|
|
count++;
|
|
}
|
|
return count;
|
|
}
|
|
|
|
uint64_t VersionSet::GetTotalSstFilesSize(Version* dummy_versions) {
|
|
std::unordered_set<uint64_t> unique_files;
|
|
uint64_t total_files_size = 0;
|
|
for (Version* v = dummy_versions->next_; v != dummy_versions; v = v->next_) {
|
|
VersionStorageInfo* storage_info = v->storage_info();
|
|
for (int level = 0; level < storage_info->num_levels_; level++) {
|
|
for (const auto& file_meta : storage_info->LevelFiles(level)) {
|
|
if (unique_files.find(file_meta->fd.packed_number_and_path_id) ==
|
|
unique_files.end()) {
|
|
unique_files.insert(file_meta->fd.packed_number_and_path_id);
|
|
total_files_size += file_meta->fd.GetFileSize();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return total_files_size;
|
|
}
|
|
|
|
} // namespace rocksdb
|