rocksdb/db/compaction/compaction_outputs.h
Yu Zhang 2c02a9b76f Preserve TimedPut on penultimate level until it actually expires (#12543)
Summary:
To make sure `TimedPut` are placed on proper tier before and when it becomes eligible for cold tier
1) flush and compaction need to keep relevant seqno to time mapping for not just the sequence number contained in internal keys, but also preferred sequence number for `TimedPut` entries.

This PR also fix some bugs in for handling `TimedPut` during compaction:
1) dealing with an edge case when a `TimedPut` entry's internal key is the right bound for penultimate level, the internal key after swapping in its preferred sequence number will fall outside of the penultimate range because preferred sequence number is smaller than its original sequence number. The entry however is still safe to be placed on penultimate level, so we keep track of `TimedPut` entry's original sequence number for this check. The idea behind this is that as long as it's safe for the original key to be placed on penultimate level, it's safe for the entry with swapped preferred sequence number to be placed on penultimate level too. Because we only swap in preferred sequence number when that entry is visible to the earliest snapshot and there is no other data points with the same user key in lower levels. On the other hand, as long as it's not safe for the original key to be placed on penultimate level, we will not place the entry after swapping the preferred seqno on penultimate level either.

2) the assertion that preferred seqno is always bigger than original sequence number may fail if this logic is only exercised after sequence number is zeroed out. We adjust the assertion to handle that case too. In this case, we don't swap in the preferred seqno but will adjust the its type to `kTypeValue`.

3) there was a special case handling for when range deletion may end up incorrectly covering an entry if preferred seqno is swapped in. But it missed the case that if the original entry is already covered by range deletion. The original handling will mistakenly output the entry instead of omitting it.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/12543

Test Plan:
./tiered_compaction_test --gtest_filter="PrecludeLastLevelTest.PreserveTimedPutOnPenultimateLevel"
./compaction_iterator_test --gtest_filter="*TimedPut*"

Reviewed By: pdillinger

Differential Revision: D56195096

Pulled By: jowlyzhang

fbshipit-source-id: 37ebb09d2513abbd9e90cda0217e26874584b8f3
2024-04-30 11:16:02 -07:00

412 lines
15 KiB
C++

// Copyright (c) Meta Platforms, Inc. and affiliates.
//
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
#pragma once
#include "db/blob/blob_garbage_meter.h"
#include "db/compaction/compaction.h"
#include "db/compaction/compaction_iterator.h"
#include "db/internal_stats.h"
#include "db/output_validator.h"
namespace ROCKSDB_NAMESPACE {
class CompactionOutputs;
using CompactionFileOpenFunc = std::function<Status(CompactionOutputs&)>;
using CompactionFileCloseFunc =
std::function<Status(CompactionOutputs&, const Status&, const Slice&)>;
// Files produced by subcompaction, most of the functions are used by
// compaction_job Open/Close compaction file functions.
class CompactionOutputs {
public:
// compaction output file
struct Output {
Output(FileMetaData&& _meta, const InternalKeyComparator& _icmp,
bool _enable_hash, bool _finished, uint64_t precalculated_hash)
: meta(std::move(_meta)),
validator(_icmp, _enable_hash, precalculated_hash),
finished(_finished) {}
FileMetaData meta;
OutputValidator validator;
bool finished;
std::shared_ptr<const TableProperties> table_properties;
};
CompactionOutputs() = delete;
explicit CompactionOutputs(const Compaction* compaction,
const bool is_penultimate_level);
// Add generated output to the list
void AddOutput(FileMetaData&& meta, const InternalKeyComparator& icmp,
bool enable_hash, bool finished = false,
uint64_t precalculated_hash = 0) {
outputs_.emplace_back(std::move(meta), icmp, enable_hash, finished,
precalculated_hash);
}
// Set new table builder for the current output
void NewBuilder(const TableBuilderOptions& tboptions);
// Assign a new WritableFileWriter to the current output
void AssignFileWriter(WritableFileWriter* writer) {
file_writer_.reset(writer);
}
// TODO: Remove it when remote compaction support tiered compaction
void SetTotalBytes(uint64_t bytes) { stats_.bytes_written += bytes; }
void SetNumOutputRecords(uint64_t num) { stats_.num_output_records = num; }
// TODO: Move the BlobDB builder into CompactionOutputs
const std::vector<BlobFileAddition>& GetBlobFileAdditions() const {
if (is_penultimate_level_) {
assert(blob_file_additions_.empty());
}
return blob_file_additions_;
}
std::vector<BlobFileAddition>* GetBlobFileAdditionsPtr() {
assert(!is_penultimate_level_);
return &blob_file_additions_;
}
bool HasBlobFileAdditions() const { return !blob_file_additions_.empty(); }
BlobGarbageMeter* CreateBlobGarbageMeter() {
assert(!is_penultimate_level_);
blob_garbage_meter_ = std::make_unique<BlobGarbageMeter>();
return blob_garbage_meter_.get();
}
BlobGarbageMeter* GetBlobGarbageMeter() const {
if (is_penultimate_level_) {
// blobdb doesn't support per_key_placement yet
assert(blob_garbage_meter_ == nullptr);
return nullptr;
}
return blob_garbage_meter_.get();
}
void UpdateBlobStats() {
assert(!is_penultimate_level_);
stats_.num_output_files_blob = blob_file_additions_.size();
for (const auto& blob : blob_file_additions_) {
stats_.bytes_written_blob += blob.GetTotalBlobBytes();
}
}
// Finish the current output file
Status Finish(const Status& intput_status,
const SeqnoToTimeMapping& seqno_to_time_mapping);
// Update output table properties from table builder
void UpdateTableProperties() {
current_output().table_properties =
std::make_shared<TableProperties>(GetTableProperties());
}
IOStatus WriterSyncClose(const Status& intput_status, SystemClock* clock,
Statistics* statistics, bool use_fsync);
TableProperties GetTableProperties() {
return builder_->GetTableProperties();
}
Slice SmallestUserKey() const {
if (!outputs_.empty() && outputs_[0].finished) {
return outputs_[0].meta.smallest.user_key();
} else {
return Slice{nullptr, 0};
}
}
Slice LargestUserKey() const {
if (!outputs_.empty() && outputs_.back().finished) {
return outputs_.back().meta.largest.user_key();
} else {
return Slice{nullptr, 0};
}
}
// In case the last output file is empty, which doesn't need to keep.
void RemoveLastEmptyOutput() {
if (!outputs_.empty() && !outputs_.back().meta.fd.file_size) {
// An error occurred, so ignore the last output.
outputs_.pop_back();
}
}
// Remove the last output, for example the last output doesn't have data (no
// entry and no range-dels), but file_size might not be 0, as it has SST
// metadata.
void RemoveLastOutput() {
assert(!outputs_.empty());
outputs_.pop_back();
}
bool HasBuilder() const { return builder_ != nullptr; }
FileMetaData* GetMetaData() { return &current_output().meta; }
bool HasOutput() const { return !outputs_.empty(); }
uint64_t NumEntries() const { return builder_->NumEntries(); }
void ResetBuilder() {
builder_.reset();
current_output_file_size_ = 0;
}
// Add range deletions from the range_del_agg_ to the current output file.
// Input parameters, `range_tombstone_lower_bound_` and current output's
// metadata determine the bounds on range deletions to add. Updates output
// file metadata boundary if extended by range tombstones.
//
// @param comp_start_user_key and comp_end_user_key include timestamp if
// user-defined timestamp is enabled. Their timestamp should be max timestamp.
// @param next_table_min_key internal key lower bound for the next compaction
// output.
// @param full_history_ts_low used for range tombstone garbage collection.
Status AddRangeDels(const Slice* comp_start_user_key,
const Slice* comp_end_user_key,
CompactionIterationStats& range_del_out_stats,
bool bottommost_level, const InternalKeyComparator& icmp,
SequenceNumber earliest_snapshot,
const Slice& next_table_min_key,
const std::string& full_history_ts_low);
// if the outputs have range delete, range delete is also data
bool HasRangeDel() const {
return range_del_agg_ && !range_del_agg_->IsEmpty();
}
private:
friend class SubcompactionState;
void FillFilesToCutForTtl();
void SetOutputSlitKey(const std::optional<Slice> start,
const std::optional<Slice> end) {
const InternalKeyComparator* icmp =
&compaction_->column_family_data()->internal_comparator();
const InternalKey* output_split_key = compaction_->GetOutputSplitKey();
// Invalid output_split_key indicates that we do not need to split
if (output_split_key != nullptr) {
// We may only split the output when the cursor is in the range. Split
if ((!end.has_value() ||
icmp->user_comparator()->Compare(
ExtractUserKey(output_split_key->Encode()), *end) < 0) &&
(!start.has_value() ||
icmp->user_comparator()->Compare(
ExtractUserKey(output_split_key->Encode()), *start) > 0)) {
local_output_split_key_ = output_split_key;
}
}
}
// Returns true iff we should stop building the current output
// before processing the current key in compaction iterator.
bool ShouldStopBefore(const CompactionIterator& c_iter);
void Cleanup() {
if (builder_ != nullptr) {
// May happen if we get a shutdown call in the middle of compaction
builder_->Abandon();
builder_.reset();
}
}
// Updates states related to file cutting for TTL.
// Returns a boolean value indicating whether the current
// compaction output file should be cut before `internal_key`.
//
// @param internal_key the current key to be added to output.
bool UpdateFilesToCutForTTLStates(const Slice& internal_key);
// update tracked grandparents information like grandparent index, if it's
// in the gap between 2 grandparent files, accumulated grandparent files size
// etc.
// It returns how many boundaries it crosses by including current key.
size_t UpdateGrandparentBoundaryInfo(const Slice& internal_key);
// helper function to get the overlapped grandparent files size, it's only
// used for calculating the first key's overlap.
uint64_t GetCurrentKeyGrandparentOverlappedBytes(
const Slice& internal_key) const;
// Add current key from compaction_iterator to the output file. If needed
// close and open new compaction output with the functions provided.
Status AddToOutput(const CompactionIterator& c_iter,
const CompactionFileOpenFunc& open_file_func,
const CompactionFileCloseFunc& close_file_func);
// Close the current output. `open_file_func` is needed for creating new file
// for range-dels only output file.
Status CloseOutput(const Status& curr_status,
const CompactionFileOpenFunc& open_file_func,
const CompactionFileCloseFunc& close_file_func) {
Status status = curr_status;
// handle subcompaction containing only range deletions
if (status.ok() && !HasBuilder() && !HasOutput() && HasRangeDel()) {
status = open_file_func(*this);
}
if (HasBuilder()) {
const Slice empty_key{};
Status s = close_file_func(*this, status, empty_key);
if (!s.ok() && status.ok()) {
status = s;
}
}
return status;
}
// This subcompaction's output could be empty if compaction was aborted before
// this subcompaction had a chance to generate any output files. When
// subcompactions are executed sequentially this is more likely and will be
// particularly likely for the later subcompactions to be empty. Once they are
// run in parallel however it should be much rarer.
// It's caller's responsibility to make sure it's not empty.
Output& current_output() {
assert(!outputs_.empty());
return outputs_.back();
}
// Assign the range_del_agg to the target output level. There's only one
// range-del-aggregator per compaction outputs, for
// output_to_penultimate_level compaction it is only assigned to the
// penultimate level.
void AssignRangeDelAggregator(
std::unique_ptr<CompactionRangeDelAggregator>&& range_del_agg) {
assert(range_del_agg_ == nullptr);
range_del_agg_ = std::move(range_del_agg);
}
const Compaction* compaction_;
// current output builder and writer
std::unique_ptr<TableBuilder> builder_;
std::unique_ptr<WritableFileWriter> file_writer_;
uint64_t current_output_file_size_ = 0;
SequenceNumber smallest_preferred_seqno_ = kMaxSequenceNumber;
// all the compaction outputs so far
std::vector<Output> outputs_;
// BlobDB info
std::vector<BlobFileAddition> blob_file_additions_;
std::unique_ptr<BlobGarbageMeter> blob_garbage_meter_;
// Basic compaction output stats for this level's outputs
InternalStats::CompactionOutputsStats stats_;
// indicate if this CompactionOutputs obj for penultimate_level, should always
// be false if per_key_placement feature is not enabled.
const bool is_penultimate_level_;
std::unique_ptr<CompactionRangeDelAggregator> range_del_agg_ = nullptr;
// partitioner information
std::string last_key_for_partitioner_;
std::unique_ptr<SstPartitioner> partitioner_;
// A flag determines if this subcompaction has been split by the cursor
// for RoundRobin compaction
bool is_split_ = false;
// We also maintain the output split key for each subcompaction to avoid
// repetitive comparison in ShouldStopBefore()
const InternalKey* local_output_split_key_ = nullptr;
// Some identified files with old oldest ancester time and the range should be
// isolated out so that the output file(s) in that range can be merged down
// for TTL and clear the timestamps for the range.
std::vector<FileMetaData*> files_to_cut_for_ttl_;
int cur_files_to_cut_for_ttl_ = -1;
int next_files_to_cut_for_ttl_ = 0;
// An index that used to speed up ShouldStopBefore().
size_t grandparent_index_ = 0;
// if the output key is being grandparent files gap, so:
// key > grandparents[grandparent_index_ - 1].largest &&
// key < grandparents[grandparent_index_].smallest
bool being_grandparent_gap_ = true;
// The number of bytes overlapping between the current output and
// grandparent files used in ShouldStopBefore().
uint64_t grandparent_overlapped_bytes_ = 0;
// A flag determines whether the key has been seen in ShouldStopBefore()
bool seen_key_ = false;
// for the current output file, how many file boundaries has it crossed,
// basically number of files overlapped * 2
size_t grandparent_boundary_switched_num_ = 0;
// The smallest key of the current output file, this is set when current
// output file's smallest key is a range tombstone start key.
InternalKey range_tombstone_lower_bound_;
// Used for calls to compaction->KeyRangeNotExistsBeyondOutputLevel() in
// CompactionOutputs::AddRangeDels().
// level_ptrs_[i] holds index of the file that was checked during the last
// call to compaction->KeyRangeNotExistsBeyondOutputLevel(). This allows
// future calls to the function to pick up where it left off, since each
// range tombstone added to output file within each subcompaction is in
// increasing key range.
std::vector<size_t> level_ptrs_;
};
// helper struct to concatenate the last level and penultimate level outputs
// which could be replaced by std::ranges::join_view() in c++20
struct OutputIterator {
public:
explicit OutputIterator(const std::vector<CompactionOutputs::Output>& a,
const std::vector<CompactionOutputs::Output>& b)
: a_(a), b_(b) {
within_a = !a_.empty();
idx_ = 0;
}
OutputIterator begin() { return *this; }
OutputIterator end() { return *this; }
size_t size() { return a_.size() + b_.size(); }
const CompactionOutputs::Output& operator*() const {
return within_a ? a_[idx_] : b_[idx_];
}
OutputIterator& operator++() {
idx_++;
if (within_a && idx_ >= a_.size()) {
within_a = false;
idx_ = 0;
}
assert(within_a || idx_ <= b_.size());
return *this;
}
bool operator!=(const OutputIterator& /*rhs*/) const {
return within_a || idx_ < b_.size();
}
private:
const std::vector<CompactionOutputs::Output>& a_;
const std::vector<CompactionOutputs::Output>& b_;
bool within_a;
size_t idx_;
};
} // namespace ROCKSDB_NAMESPACE