mirror of
https://github.com/facebook/rocksdb.git
synced 2024-11-28 05:43:50 +00:00
a43481b3d0
Summary: When the rate limiter does not have any waiting requests, the first request to arrive may consume all of the available bandwidth, despite potentially having lower priority than requests that arrive later in the same refill interval. Then, those higher priority requests must wait for a refill. So even in scenarios in which we have an overall bandwidth surplus, the highest priority requests can be sporadically delayed up to a whole refill period. Alone, this isn't necessarily problematic as the refill period is configurable via `refill_period_us` and can be tuned down as needed until the max sporadic delay is tolerable. However, tuning down `refill_period_us` had a side effect of reducing burst size. Some users require a certain burst size to issue optimal I/O sizes to the underlying storage system. To satisfy those users, this PR decouples the refill period from the burst size. That way, the max sporadic delay can be limited without impacting I/O sizes issued to the underlying storage system. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12379 Test Plan: The goal is to show we can now limit the max sporadic delay without impacting compaction's I/O size. The benchmark runs compaction with a large I/O size, while user reads simultaneously run at a low rate that does not consume all of the available bandwidth. The max sporadic delay is measured using the P100 of rocksdb.file.read.get.micros. I just used strace to verify the compaction reads follow `rate_limiter_single_burst_bytes` Setup: `./db_bench -benchmarks=fillrandom,flush -write_buffer_size=67108864 -disable_auto_compactions=true -value_size=256 -num=1048576` Benchmark: `./db_bench -benchmarks=readrandom -use_existing_db=true -num=1048576 -duration=10 -benchmark_read_rate_limit=4096 -rate_limiter_bytes_per_sec=67108864 -rate_limiter_refill_period_us=$refill_micros -rate_limiter_single_burst_bytes=16777216 -rate_limit_bg_reads=true -rate_limit_user_ops=true -statistics=true -cache_size=0 -stats_level=5 -compaction_readahead_size=16777216 -use_direct_reads=true` Results: refill_micros | rocksdb.file.read.get.micros (P100) -- | -- 10000 | 10802 100000 | 100240 1000000 | 922061 For verifying compaction read sizes: `strace -fye pread64 ./db_bench -benchmarks=compact -use_existing_db=true -rate_limiter_bytes_per_sec=67108864 -rate_limiter_refill_period_us=$refill_micros -rate_limiter_single_burst_bytes=16777216 -rate_limit_bg_reads=true -compaction_readahead_size=16777216 -use_direct_reads=true` Reviewed By: hx235 Differential Revision: D54165675 Pulled By: ajkr fbshipit-source-id: c5968486316cbfb7ff8e5b7d75d3589883dd1105
612 lines
25 KiB
C++
612 lines
25 KiB
C++
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
// (found in the LICENSE.Apache file in the root directory).
|
|
//
|
|
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
|
|
// Use of this source code is governed by a BSD-style license that can be
|
|
// found in the LICENSE file. See the AUTHORS file for names of contributors.
|
|
|
|
#include <chrono>
|
|
#include <cinttypes>
|
|
#include <cstdint>
|
|
#include <limits>
|
|
|
|
#include "db/db_test_util.h"
|
|
#include "port/port.h"
|
|
#include "rocksdb/system_clock.h"
|
|
#include "test_util/mock_time_env.h"
|
|
#include "test_util/sync_point.h"
|
|
#include "test_util/testharness.h"
|
|
#include "util/random.h"
|
|
#include "util/rate_limiter_impl.h"
|
|
|
|
namespace ROCKSDB_NAMESPACE {
|
|
|
|
// TODO(yhchiang): the rate will not be accurate when we run test in parallel.
|
|
class RateLimiterTest : public testing::Test {
|
|
protected:
|
|
~RateLimiterTest() override {
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
}
|
|
};
|
|
|
|
TEST_F(RateLimiterTest, OverflowRate) {
|
|
GenericRateLimiter limiter(std::numeric_limits<int64_t>::max(), 1000, 10,
|
|
RateLimiter::Mode::kWritesOnly,
|
|
SystemClock::Default(), false /* auto_tuned */,
|
|
0 /* single_burst_bytes */);
|
|
ASSERT_GT(limiter.GetSingleBurstBytes(), 1000000000ll);
|
|
}
|
|
|
|
TEST_F(RateLimiterTest, StartStop) {
|
|
std::unique_ptr<RateLimiter> limiter(NewGenericRateLimiter(100, 100, 10));
|
|
}
|
|
|
|
TEST_F(RateLimiterTest, GetTotalBytesThrough) {
|
|
std::unique_ptr<RateLimiter> limiter(NewGenericRateLimiter(
|
|
200 /* rate_bytes_per_sec */, 1000 * 1000 /* refill_period_us */,
|
|
10 /* fairness */));
|
|
for (int i = Env::IO_LOW; i <= Env::IO_TOTAL; ++i) {
|
|
ASSERT_EQ(limiter->GetTotalBytesThrough(static_cast<Env::IOPriority>(i)),
|
|
0);
|
|
}
|
|
|
|
std::int64_t request_byte = 200;
|
|
std::int64_t request_byte_sum = 0;
|
|
for (int i = Env::IO_LOW; i < Env::IO_TOTAL; ++i) {
|
|
limiter->Request(request_byte, static_cast<Env::IOPriority>(i),
|
|
nullptr /* stats */, RateLimiter::OpType::kWrite);
|
|
request_byte_sum += request_byte;
|
|
}
|
|
|
|
for (int i = Env::IO_LOW; i < Env::IO_TOTAL; ++i) {
|
|
EXPECT_EQ(limiter->GetTotalBytesThrough(static_cast<Env::IOPriority>(i)),
|
|
request_byte)
|
|
<< "Failed to track total_bytes_through_ correctly when IOPriority = "
|
|
<< static_cast<Env::IOPriority>(i);
|
|
}
|
|
EXPECT_EQ(limiter->GetTotalBytesThrough(Env::IO_TOTAL), request_byte_sum)
|
|
<< "Failed to track total_bytes_through_ correctly when IOPriority = "
|
|
"Env::IO_TOTAL";
|
|
}
|
|
|
|
TEST_F(RateLimiterTest, GetTotalRequests) {
|
|
std::unique_ptr<RateLimiter> limiter(NewGenericRateLimiter(
|
|
200 /* rate_bytes_per_sec */, 1000 * 1000 /* refill_period_us */,
|
|
10 /* fairness */));
|
|
for (int i = Env::IO_LOW; i <= Env::IO_TOTAL; ++i) {
|
|
ASSERT_EQ(limiter->GetTotalRequests(static_cast<Env::IOPriority>(i)), 0);
|
|
}
|
|
|
|
std::int64_t total_requests_sum = 0;
|
|
for (int i = Env::IO_LOW; i < Env::IO_TOTAL; ++i) {
|
|
limiter->Request(200, static_cast<Env::IOPriority>(i), nullptr /* stats */,
|
|
RateLimiter::OpType::kWrite);
|
|
total_requests_sum += 1;
|
|
}
|
|
|
|
for (int i = Env::IO_LOW; i < Env::IO_TOTAL; ++i) {
|
|
EXPECT_EQ(limiter->GetTotalRequests(static_cast<Env::IOPriority>(i)), 1)
|
|
<< "Failed to track total_requests_ correctly when IOPriority = "
|
|
<< static_cast<Env::IOPriority>(i);
|
|
}
|
|
EXPECT_EQ(limiter->GetTotalRequests(Env::IO_TOTAL), total_requests_sum)
|
|
<< "Failed to track total_requests_ correctly when IOPriority = "
|
|
"Env::IO_TOTAL";
|
|
}
|
|
|
|
TEST_F(RateLimiterTest, GetTotalPendingRequests) {
|
|
std::unique_ptr<RateLimiter> limiter(NewGenericRateLimiter(
|
|
200 /* rate_bytes_per_sec */, 1000 * 1000 /* refill_period_us */,
|
|
10 /* fairness */));
|
|
int64_t total_pending_requests = 0;
|
|
for (int i = Env::IO_LOW; i <= Env::IO_TOTAL; ++i) {
|
|
ASSERT_OK(limiter->GetTotalPendingRequests(
|
|
&total_pending_requests, static_cast<Env::IOPriority>(i)));
|
|
ASSERT_EQ(total_pending_requests, 0);
|
|
}
|
|
// This is a variable for making sure the following callback is called
|
|
// and the assertions in it are indeed excuted
|
|
bool nonzero_pending_requests_verified = false;
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
"GenericRateLimiter::Request:PostEnqueueRequest", [&](void* arg) {
|
|
port::Mutex* request_mutex = (port::Mutex*)arg;
|
|
// We temporarily unlock the mutex so that the following
|
|
// GetTotalPendingRequests() can acquire it
|
|
request_mutex->Unlock();
|
|
for (int i = Env::IO_LOW; i <= Env::IO_TOTAL; ++i) {
|
|
EXPECT_OK(limiter->GetTotalPendingRequests(
|
|
&total_pending_requests, static_cast<Env::IOPriority>(i)))
|
|
<< "Failed to return total pending requests for priority level = "
|
|
<< static_cast<Env::IOPriority>(i);
|
|
if (i == Env::IO_USER || i == Env::IO_TOTAL) {
|
|
EXPECT_EQ(total_pending_requests, 1)
|
|
<< "Failed to correctly return total pending requests for "
|
|
"priority level = "
|
|
<< static_cast<Env::IOPriority>(i);
|
|
} else {
|
|
EXPECT_EQ(total_pending_requests, 0)
|
|
<< "Failed to correctly return total pending requests for "
|
|
"priority level = "
|
|
<< static_cast<Env::IOPriority>(i);
|
|
}
|
|
}
|
|
// We lock the mutex again so that the request thread can resume running
|
|
// with the mutex locked
|
|
request_mutex->Lock();
|
|
nonzero_pending_requests_verified = true;
|
|
});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
limiter->Request(200, Env::IO_USER, nullptr /* stats */,
|
|
RateLimiter::OpType::kWrite);
|
|
ASSERT_EQ(nonzero_pending_requests_verified, true);
|
|
for (int i = Env::IO_LOW; i <= Env::IO_TOTAL; ++i) {
|
|
EXPECT_OK(limiter->GetTotalPendingRequests(&total_pending_requests,
|
|
static_cast<Env::IOPriority>(i)))
|
|
<< "Failed to return total pending requests for priority level = "
|
|
<< static_cast<Env::IOPriority>(i);
|
|
EXPECT_EQ(total_pending_requests, 0)
|
|
<< "Failed to correctly return total pending requests for priority "
|
|
"level = "
|
|
<< static_cast<Env::IOPriority>(i);
|
|
}
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
SyncPoint::GetInstance()->ClearCallBack(
|
|
"GenericRateLimiter::Request:PostEnqueueRequest");
|
|
}
|
|
|
|
TEST_F(RateLimiterTest, Modes) {
|
|
for (auto mode : {RateLimiter::Mode::kWritesOnly,
|
|
RateLimiter::Mode::kReadsOnly, RateLimiter::Mode::kAllIo}) {
|
|
GenericRateLimiter limiter(
|
|
2000 /* rate_bytes_per_sec */, 1000 * 1000 /* refill_period_us */,
|
|
10 /* fairness */, mode, SystemClock::Default(), false /* auto_tuned */,
|
|
0 /* single_burst_bytes */);
|
|
limiter.Request(1000 /* bytes */, Env::IO_HIGH, nullptr /* stats */,
|
|
RateLimiter::OpType::kRead);
|
|
if (mode == RateLimiter::Mode::kWritesOnly) {
|
|
ASSERT_EQ(0, limiter.GetTotalBytesThrough(Env::IO_HIGH));
|
|
} else {
|
|
ASSERT_EQ(1000, limiter.GetTotalBytesThrough(Env::IO_HIGH));
|
|
}
|
|
|
|
limiter.Request(1000 /* bytes */, Env::IO_HIGH, nullptr /* stats */,
|
|
RateLimiter::OpType::kWrite);
|
|
if (mode == RateLimiter::Mode::kAllIo) {
|
|
ASSERT_EQ(2000, limiter.GetTotalBytesThrough(Env::IO_HIGH));
|
|
} else {
|
|
ASSERT_EQ(1000, limiter.GetTotalBytesThrough(Env::IO_HIGH));
|
|
}
|
|
}
|
|
}
|
|
|
|
TEST_F(RateLimiterTest, GeneratePriorityIterationOrder) {
|
|
std::unique_ptr<RateLimiter> limiter(NewGenericRateLimiter(
|
|
200 /* rate_bytes_per_sec */, 1000 * 1000 /* refill_period_us */,
|
|
10 /* fairness */));
|
|
|
|
bool possible_random_one_in_fairness_results_for_high_mid_pri[4][2] = {
|
|
{false, false}, {false, true}, {true, false}, {true, true}};
|
|
std::vector<Env::IOPriority> possible_priority_iteration_orders[4] = {
|
|
{Env::IO_USER, Env::IO_HIGH, Env::IO_MID, Env::IO_LOW},
|
|
{Env::IO_USER, Env::IO_HIGH, Env::IO_LOW, Env::IO_MID},
|
|
{Env::IO_USER, Env::IO_MID, Env::IO_LOW, Env::IO_HIGH},
|
|
{Env::IO_USER, Env::IO_LOW, Env::IO_MID, Env::IO_HIGH}};
|
|
|
|
for (int i = 0; i < 4; ++i) {
|
|
// These are variables for making sure the following callbacks are called
|
|
// and the assertion in the last callback is indeed excuted
|
|
bool high_pri_iterated_after_mid_low_pri_set = false;
|
|
bool mid_pri_itereated_after_low_pri_set = false;
|
|
bool pri_iteration_order_verified = false;
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
"GenericRateLimiter::GeneratePriorityIterationOrderLocked::"
|
|
"PostRandomOneInFairnessForHighPri",
|
|
[&](void* arg) {
|
|
bool* high_pri_iterated_after_mid_low_pri = (bool*)arg;
|
|
*high_pri_iterated_after_mid_low_pri =
|
|
possible_random_one_in_fairness_results_for_high_mid_pri[i][0];
|
|
high_pri_iterated_after_mid_low_pri_set = true;
|
|
});
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
"GenericRateLimiter::GeneratePriorityIterationOrderLocked::"
|
|
"PostRandomOneInFairnessForMidPri",
|
|
[&](void* arg) {
|
|
bool* mid_pri_itereated_after_low_pri = (bool*)arg;
|
|
*mid_pri_itereated_after_low_pri =
|
|
possible_random_one_in_fairness_results_for_high_mid_pri[i][1];
|
|
mid_pri_itereated_after_low_pri_set = true;
|
|
});
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
"GenericRateLimiter::GeneratePriorityIterationOrderLocked::"
|
|
"PreReturnPriIterationOrder",
|
|
[&](void* arg) {
|
|
std::vector<Env::IOPriority>* pri_iteration_order =
|
|
(std::vector<Env::IOPriority>*)arg;
|
|
EXPECT_EQ(*pri_iteration_order, possible_priority_iteration_orders[i])
|
|
<< "Failed to generate priority iteration order correctly when "
|
|
"high_pri_iterated_after_mid_low_pri = "
|
|
<< possible_random_one_in_fairness_results_for_high_mid_pri[i][0]
|
|
<< ", mid_pri_itereated_after_low_pri = "
|
|
<< possible_random_one_in_fairness_results_for_high_mid_pri[i][1]
|
|
<< std::endl;
|
|
pri_iteration_order_verified = true;
|
|
});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
limiter->Request(200 /* request max bytes to drain so that refill and order
|
|
generation will be triggered every time
|
|
GenericRateLimiter::Request() is called */
|
|
,
|
|
Env::IO_USER, nullptr /* stats */,
|
|
RateLimiter::OpType::kWrite);
|
|
ASSERT_EQ(high_pri_iterated_after_mid_low_pri_set, true);
|
|
ASSERT_EQ(mid_pri_itereated_after_low_pri_set, true);
|
|
ASSERT_EQ(pri_iteration_order_verified, true);
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
SyncPoint::GetInstance()->ClearCallBack(
|
|
"GenericRateLimiter::GeneratePriorityIterationOrderLocked::"
|
|
"PreReturnPriIterationOrder");
|
|
SyncPoint::GetInstance()->ClearCallBack(
|
|
"GenericRateLimiter::GeneratePriorityIterationOrderLocked::"
|
|
"PostRandomOneInFairnessForMidPri");
|
|
SyncPoint::GetInstance()->ClearCallBack(
|
|
"GenericRateLimiter::GeneratePriorityIterationOrderLocked::"
|
|
"PostRandomOneInFairnessForHighPri");
|
|
}
|
|
}
|
|
|
|
TEST_F(RateLimiterTest, Rate) {
|
|
auto* env = Env::Default();
|
|
struct Arg {
|
|
Arg(int32_t _target_rate, int _burst)
|
|
: limiter(NewGenericRateLimiter(_target_rate /* rate_bytes_per_sec */,
|
|
100 * 1000 /* refill_period_us */,
|
|
10 /* fairness */)),
|
|
request_size(_target_rate /
|
|
10 /* refill period here is 1/10 second */),
|
|
burst(_burst) {}
|
|
std::unique_ptr<RateLimiter> limiter;
|
|
int32_t request_size;
|
|
int burst;
|
|
};
|
|
|
|
auto writer = [](void* p) {
|
|
const auto& thread_clock = SystemClock::Default();
|
|
auto* arg = static_cast<Arg*>(p);
|
|
// Test for 2 seconds
|
|
auto until = thread_clock->NowMicros() + 2 * 1000000;
|
|
Random r((uint32_t)(thread_clock->NowNanos() %
|
|
std::numeric_limits<uint32_t>::max()));
|
|
while (thread_clock->NowMicros() < until) {
|
|
for (int i = 0; i < static_cast<int>(r.Skewed(arg->burst * 2) + 1); ++i) {
|
|
arg->limiter->Request(r.Uniform(arg->request_size - 1) + 1,
|
|
Env::IO_USER, nullptr /* stats */,
|
|
RateLimiter::OpType::kWrite);
|
|
}
|
|
|
|
for (int i = 0; i < static_cast<int>(r.Skewed(arg->burst) + 1); ++i) {
|
|
arg->limiter->Request(r.Uniform(arg->request_size - 1) + 1,
|
|
Env::IO_HIGH, nullptr /* stats */,
|
|
RateLimiter::OpType::kWrite);
|
|
}
|
|
|
|
for (int i = 0; i < static_cast<int>(r.Skewed(arg->burst / 2 + 1) + 1);
|
|
++i) {
|
|
arg->limiter->Request(r.Uniform(arg->request_size - 1) + 1, Env::IO_MID,
|
|
nullptr /* stats */, RateLimiter::OpType::kWrite);
|
|
}
|
|
|
|
arg->limiter->Request(r.Uniform(arg->request_size - 1) + 1, Env::IO_LOW,
|
|
nullptr /* stats */, RateLimiter::OpType::kWrite);
|
|
}
|
|
};
|
|
|
|
int samples = 0;
|
|
int samples_at_minimum = 0;
|
|
|
|
for (int i = 1; i <= 16; i *= 2) {
|
|
int32_t target = i * 1024 * 10;
|
|
Arg arg(target, i / 4 + 1);
|
|
int64_t old_total_bytes_through = 0;
|
|
for (int iter = 1; iter <= 2; ++iter) {
|
|
// second iteration changes the target dynamically
|
|
if (iter == 2) {
|
|
target *= 2;
|
|
arg.limiter->SetBytesPerSecond(target);
|
|
}
|
|
auto start = env->NowMicros();
|
|
for (int t = 0; t < i; ++t) {
|
|
env->StartThread(writer, &arg);
|
|
}
|
|
env->WaitForJoin();
|
|
|
|
auto elapsed = env->NowMicros() - start;
|
|
double rate =
|
|
(arg.limiter->GetTotalBytesThrough() - old_total_bytes_through) *
|
|
1000000.0 / elapsed;
|
|
old_total_bytes_through = arg.limiter->GetTotalBytesThrough();
|
|
fprintf(stderr,
|
|
"request size [1 - %" PRIi32 "], limit %" PRIi32
|
|
" KB/sec, actual rate: %lf KB/sec, elapsed %.2lf seconds\n",
|
|
arg.request_size - 1, target / 1024, rate / 1024,
|
|
elapsed / 1000000.0);
|
|
|
|
++samples;
|
|
if (rate / target >= 0.80) {
|
|
++samples_at_minimum;
|
|
}
|
|
ASSERT_LE(rate / target, 1.25);
|
|
}
|
|
}
|
|
|
|
// This can fail due to slow execution speed, like when using valgrind or in
|
|
// heavily loaded CI environments
|
|
bool skip_minimum_rate_check =
|
|
#if defined(ROCKSDB_VALGRIND_RUN)
|
|
true;
|
|
#elif defined(OS_MACOSX)
|
|
getenv("CIRCLECI") || getenv("GITHUB_ACTIONS");
|
|
#else
|
|
getenv("SANDCASTLE");
|
|
#endif
|
|
if (skip_minimum_rate_check) {
|
|
fprintf(stderr, "Skipped minimum rate check (%d / %d passed)\n",
|
|
samples_at_minimum, samples);
|
|
} else {
|
|
ASSERT_EQ(samples_at_minimum, samples);
|
|
}
|
|
}
|
|
|
|
TEST_F(RateLimiterTest, LimitChangeTest) {
|
|
// starvation test when limit changes to a smaller value
|
|
int64_t refill_period = 1000 * 1000;
|
|
auto* env = Env::Default();
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
|
|
struct Arg {
|
|
Arg(int32_t _request_size, Env::IOPriority _pri,
|
|
std::shared_ptr<RateLimiter> _limiter)
|
|
: request_size(_request_size), pri(_pri), limiter(_limiter) {}
|
|
int32_t request_size;
|
|
Env::IOPriority pri;
|
|
std::shared_ptr<RateLimiter> limiter;
|
|
};
|
|
|
|
auto writer = [](void* p) {
|
|
auto* arg = static_cast<Arg*>(p);
|
|
arg->limiter->Request(arg->request_size, arg->pri, nullptr /* stats */,
|
|
RateLimiter::OpType::kWrite);
|
|
};
|
|
|
|
for (uint32_t i = 1; i <= 16; i <<= 1) {
|
|
int32_t target = i * 1024 * 10;
|
|
// refill per second
|
|
for (int iter = 0; iter < 2; iter++) {
|
|
std::shared_ptr<RateLimiter> limiter =
|
|
std::make_shared<GenericRateLimiter>(
|
|
target, refill_period, 10, RateLimiter::Mode::kWritesOnly,
|
|
SystemClock::Default(), false /* auto_tuned */,
|
|
0 /* single_burst_bytes */);
|
|
// After "GenericRateLimiter::Request:1" the mutex is held until the bytes
|
|
// are refilled. This test could be improved to change the limit when lock
|
|
// is released in `TimedWait()`.
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->LoadDependency(
|
|
{{"GenericRateLimiter::Request",
|
|
"RateLimiterTest::LimitChangeTest:changeLimitStart"},
|
|
{"RateLimiterTest::LimitChangeTest:changeLimitEnd",
|
|
"GenericRateLimiter::Request:1"}});
|
|
Arg arg(target, Env::IO_HIGH, limiter);
|
|
// The idea behind is to start a request first, then before it refills,
|
|
// update limit to a different value (2X/0.5X). No starvation should
|
|
// be guaranteed under any situation
|
|
// TODO(lightmark): more test cases are welcome.
|
|
env->StartThread(writer, &arg);
|
|
int32_t new_limit = (target << 1) >> (iter << 1);
|
|
TEST_SYNC_POINT("RateLimiterTest::LimitChangeTest:changeLimitStart");
|
|
arg.limiter->SetBytesPerSecond(new_limit);
|
|
TEST_SYNC_POINT("RateLimiterTest::LimitChangeTest:changeLimitEnd");
|
|
env->WaitForJoin();
|
|
fprintf(stderr,
|
|
"[COMPLETE] request size %" PRIi32 " KB, new limit %" PRIi32
|
|
"KB/sec, refill period %" PRIi64 " ms\n",
|
|
target / 1024, new_limit / 1024, refill_period / 1000);
|
|
}
|
|
}
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->DisableProcessing();
|
|
}
|
|
|
|
TEST_F(RateLimiterTest, AvailableByteSizeExhaustTest) {
|
|
SpecialEnv special_env(Env::Default(), /*time_elapse_only_sleep*/ true);
|
|
const std::chrono::seconds kTimePerRefill(1);
|
|
|
|
// This test makes sure available_bytes_ get exhausted first before queuing
|
|
// any remaining bytes when requested_bytes > available_bytes
|
|
const int64_t available_bytes_per_period = 500;
|
|
|
|
std::shared_ptr<RateLimiter> limiter = std::make_shared<GenericRateLimiter>(
|
|
available_bytes_per_period,
|
|
std::chrono::microseconds(kTimePerRefill).count(), 10 /* fairness */,
|
|
RateLimiter::Mode::kWritesOnly, special_env.GetSystemClock(),
|
|
false /* auto_tuned */, 0 /* single_burst_bytes */);
|
|
|
|
// Step 1. Request 100 and wait for the refill
|
|
// so that the remaining available bytes are 400
|
|
limiter->Request(100, Env::IO_USER, nullptr /* stats */,
|
|
RateLimiter::OpType::kWrite);
|
|
special_env.SleepForMicroseconds(
|
|
static_cast<int>(std::chrono::microseconds(kTimePerRefill).count()));
|
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->SetCallBack(
|
|
"GenericRateLimiter::Request:PostEnqueueRequest", [&](void* arg) {
|
|
port::Mutex* request_mutex = (port::Mutex*)arg;
|
|
request_mutex->Unlock();
|
|
// Step 3. Check GetTotalBytesThrough = available_bytes_per_period
|
|
// to make sure that the first request (100) and the part of the second
|
|
// request (400) made through when the remaining of the second request
|
|
// got queued
|
|
ASSERT_EQ(available_bytes_per_period,
|
|
limiter->GetTotalBytesThrough(Env::IO_USER));
|
|
request_mutex->Lock();
|
|
});
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
// Step 2. Request 500, which is greater than the remaining available bytes
|
|
// (400)
|
|
limiter->Request(500, Env::IO_USER, nullptr /* stats */,
|
|
RateLimiter::OpType::kWrite);
|
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->DisableProcessing();
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->ClearCallBack(
|
|
"GenericRateLimiter::Request:PostEnqueueRequest");
|
|
}
|
|
|
|
TEST_F(RateLimiterTest, AutoTuneIncreaseWhenFull) {
|
|
const std::chrono::seconds kTimePerRefill(1);
|
|
const int kRefillsPerTune = 100; // needs to match util/rate_limiter.cc
|
|
|
|
auto mock_clock =
|
|
std::make_shared<MockSystemClock>(Env::Default()->GetSystemClock());
|
|
|
|
auto stats = CreateDBStatistics();
|
|
std::unique_ptr<RateLimiter> rate_limiter(new GenericRateLimiter(
|
|
1000 /* rate_bytes_per_sec */,
|
|
std::chrono::microseconds(kTimePerRefill).count(), 10 /* fairness */,
|
|
RateLimiter::Mode::kWritesOnly, mock_clock, true /* auto_tuned */,
|
|
0 /* single_burst_bytes */));
|
|
|
|
// verify rate limit increases after a sequence of periods where rate limiter
|
|
// is always drained
|
|
int64_t orig_bytes_per_sec = rate_limiter->GetSingleBurstBytes();
|
|
rate_limiter->Request(orig_bytes_per_sec, Env::IO_HIGH, stats.get(),
|
|
RateLimiter::OpType::kWrite);
|
|
while (std::chrono::microseconds(mock_clock->NowMicros()) <=
|
|
kRefillsPerTune * kTimePerRefill) {
|
|
rate_limiter->Request(orig_bytes_per_sec, Env::IO_HIGH, stats.get(),
|
|
RateLimiter::OpType::kWrite);
|
|
}
|
|
int64_t new_bytes_per_sec = rate_limiter->GetSingleBurstBytes();
|
|
ASSERT_GT(new_bytes_per_sec, orig_bytes_per_sec);
|
|
|
|
// decreases after a sequence of periods where rate limiter is not drained
|
|
orig_bytes_per_sec = new_bytes_per_sec;
|
|
mock_clock->SleepForMicroseconds(static_cast<int>(
|
|
kRefillsPerTune * std::chrono::microseconds(kTimePerRefill).count()));
|
|
// make a request so tuner can be triggered
|
|
rate_limiter->Request(1 /* bytes */, Env::IO_HIGH, stats.get(),
|
|
RateLimiter::OpType::kWrite);
|
|
new_bytes_per_sec = rate_limiter->GetSingleBurstBytes();
|
|
ASSERT_LT(new_bytes_per_sec, orig_bytes_per_sec);
|
|
}
|
|
|
|
TEST_F(RateLimiterTest, WaitHangingBug) {
|
|
// At t=0: Threads 0 and 1 request `kBytesPerRefill` bytes at low-pri. One
|
|
// will be granted immediately and the other will enter `TimedWait()`.
|
|
//
|
|
// At t=`kMicrosPerRefill`: Thread 2 requests `kBytesPerRefill` bytes at
|
|
// low-pri. Thread 2's request enters the queue. To expose the bug scenario,
|
|
// `SyncPoint`s ensure this happens while the lock is temporarily released in
|
|
// `TimedWait()`. Before the bug fix, Thread 2's request would then hang in
|
|
// `Wait()` interminably.
|
|
const int kBytesPerSecond = 100;
|
|
const int kMicrosPerSecond = 1000 * 1000;
|
|
const int kMicrosPerRefill = kMicrosPerSecond;
|
|
const int kBytesPerRefill =
|
|
kBytesPerSecond * kMicrosPerRefill / kMicrosPerSecond;
|
|
|
|
auto mock_clock =
|
|
std::make_shared<MockSystemClock>(Env::Default()->GetSystemClock());
|
|
std::unique_ptr<RateLimiter> limiter(new GenericRateLimiter(
|
|
kBytesPerSecond, kMicrosPerRefill, 10 /* fairness */,
|
|
RateLimiter::Mode::kWritesOnly, mock_clock, false /* auto_tuned */,
|
|
0 /* single_burst_bytes */));
|
|
std::array<std::thread, 3> request_threads;
|
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->LoadDependency(
|
|
{{"RateLimiterTest::WaitHangingBug:InitialRequestsReady",
|
|
"MockSystemClock::TimedWait:UnlockedPreSleep"},
|
|
{"MockSystemClock::TimedWait:UnlockedPostSleep1",
|
|
"RateLimiterTest::WaitHangingBug:TestThreadRequestBegin"},
|
|
{"RateLimiterTest::WaitHangingBug:TestThreadRequestEnd",
|
|
"MockSystemClock::TimedWait:UnlockedPostSleep2"}});
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
for (int i = 0; i < 2; i++) {
|
|
request_threads[i] = std::thread([&]() {
|
|
limiter->Request(kBytesPerRefill /* bytes */, Env::IOPriority::IO_LOW,
|
|
nullptr /* stats */, RateLimiter::OpType::kWrite);
|
|
});
|
|
}
|
|
while (limiter->GetTotalRequests() < 2) {
|
|
}
|
|
TEST_SYNC_POINT("RateLimiterTest::WaitHangingBug:InitialRequestsReady");
|
|
|
|
TEST_SYNC_POINT("RateLimiterTest::WaitHangingBug:TestThreadRequestBegin");
|
|
request_threads[2] = std::thread([&]() {
|
|
limiter->Request(kBytesPerRefill /* bytes */, Env::IOPriority::IO_LOW,
|
|
nullptr /* stats */, RateLimiter::OpType::kWrite);
|
|
});
|
|
while (limiter->GetTotalRequests() < 3) {
|
|
}
|
|
TEST_SYNC_POINT("RateLimiterTest::WaitHangingBug:TestThreadRequestEnd");
|
|
|
|
for (int i = 0; i < 3; i++) {
|
|
request_threads[i].join();
|
|
}
|
|
}
|
|
|
|
TEST_F(RateLimiterTest, RuntimeSingleBurstBytesChange) {
|
|
constexpr int kMicrosecondsPerSecond = 1000000;
|
|
|
|
const int64_t kRateBytesPerSec = 400;
|
|
const int64_t kRefillBytes = 100;
|
|
|
|
const int64_t kRefillPeriodMicros =
|
|
kRefillBytes * kMicrosecondsPerSecond / kRateBytesPerSec;
|
|
|
|
const int64_t kRefillsPerBurst = 17;
|
|
const int64_t kBurstBytes = kRefillBytes * kRefillsPerBurst;
|
|
|
|
auto mock_clock =
|
|
std::make_shared<MockSystemClock>(Env::Default()->GetSystemClock());
|
|
|
|
// Zero as `single_burst_bytes` is a special value meaning the refill size
|
|
std::unique_ptr<RateLimiter> limiter(new GenericRateLimiter(
|
|
kRateBytesPerSec, kRefillPeriodMicros, 10 /* fairness */,
|
|
RateLimiter::Mode::kWritesOnly, mock_clock, false /* auto_tuned */,
|
|
0 /* single_burst_bytes */));
|
|
ASSERT_EQ(kRefillBytes, limiter->GetSingleBurstBytes());
|
|
|
|
// Dynamically setting to zero should change nothing
|
|
ASSERT_OK(limiter->SetSingleBurstBytes(0));
|
|
ASSERT_EQ(kRefillBytes, limiter->GetSingleBurstBytes());
|
|
|
|
// Negative values are invalid and should change nothing
|
|
ASSERT_TRUE(limiter->SetSingleBurstBytes(-1).IsInvalidArgument());
|
|
ASSERT_EQ(kRefillBytes, limiter->GetSingleBurstBytes());
|
|
|
|
// Positive values take effect as the new burst size
|
|
ASSERT_OK(limiter->SetSingleBurstBytes(kBurstBytes));
|
|
ASSERT_EQ(kBurstBytes, limiter->GetSingleBurstBytes());
|
|
|
|
// Initially the supply is full so a request of size `kBurstBytes` needs
|
|
// `kRefillsPerBurst - 1` refill periods to elapse.
|
|
limiter->Request(limiter->GetSingleBurstBytes() /* bytes */,
|
|
Env::IOPriority::IO_USER, nullptr /* stats */,
|
|
RateLimiter::OpType::kWrite);
|
|
ASSERT_EQ((kRefillsPerBurst - 1) * kRefillPeriodMicros,
|
|
mock_clock->NowMicros());
|
|
}
|
|
|
|
} // namespace ROCKSDB_NAMESPACE
|
|
|
|
int main(int argc, char** argv) {
|
|
ROCKSDB_NAMESPACE::port::InstallStackTraceHandler();
|
|
::testing::InitGoogleTest(&argc, argv);
|
|
return RUN_ALL_TESTS();
|
|
}
|