Commit graph

22 commits

Author SHA1 Message Date
Andrew Kryczka 06dc32ef25 internal_repo_rocksdb (435146444452818992) (#12115)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/12115

Reviewed By: jowlyzhang

Differential Revision: D51745742

Pulled By: ajkr

fbshipit-source-id: 67000d07783b413924798dd9c1751da27e119d53
2023-12-01 11:15:17 -08:00
Hui Xiao 99b371b417 Skip subsequent trace writes after encountering trace write failure (#11996)
Summary:
**Context/Summary:**
We ignore trace writing status e.g, 543191f2ea/db/db_impl/db_impl_write.cc (L221-L222)

If a write into the trace file fails, subsequent trace write will continue onto the same file.

This will trigger the assertion `assert(sync_without_flush_called_)` intended to catch write to a file that has previously seen error, added in https://github.com/facebook/rocksdb/pull/10489, https://github.com/facebook/rocksdb/pull/10555

Alternative (rejected) is to handle trace writing status at a higher level at e.g, 543191f2ea/db/db_impl/db_impl_write.cc (L221-L222). However, it makes sense to ignore such status considering tracing is not a critical but assistant component to db operation. And this alternative requires more code change. So it's better to handle the failure at a lower level as this PR

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11996

Test Plan: Add new UT failed before this PR and pass after

Reviewed By: akankshamahajan15

Differential Revision: D50532467

Pulled By: hx235

fbshipit-source-id: f2032abafd94917adbf89a20841d15b448782a33
2023-10-24 09:58:02 -07:00
codeoos f4a5446cab Fix error maybe-uninitialized #11100 (#11101)
Summary:
In this issue [11100](https://github.com/facebook/rocksdb/issues/11100)
I try to upgrade dependencies of [BaikalDB](https://github.com/baidu/BaikalDB) and tool chain to gcc-12.I found that when I build rocksdb v6.26.0(maybe I can use newer version),I found that in file trace_replay/trace_replay.cc,the compiler tell me "error mybe-uninitialized".I dound that it can be fixed very easy,so I make this pull request.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11101

Reviewed By: ajkr

Differential Revision: D42583031

Pulled By: cbi42

fbshipit-source-id: 7f399f09441a30fe88b83cec5e2fd9885bad5c06
2023-01-19 13:59:48 -08:00
Andrew Kryczka 2ee20a669d Extend trace filtering to more operation types (#9335)
Summary:
- Extended trace filtering to cover `MultiGet()`, `Seek()`, and `SeekForPrev()`. Now all user ops that can be traced support filtering.
- Enabled the new filter masks in `db_stress` since it only cares to trace writes.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9335

Test Plan:
- trace-heavy `db_stress` command reduced 30% elapsed time  (79.21 -> 55.47 seconds)

Benchmark command:
```
$ /usr/bin/time ./db_stress -ops_per_thread=100000 -sync_fault_injection=1 --db=/dev/shm/rocksdb_stress_db/ --expected_values_dir=/dev/shm/rocksdb_stress_expected/ --clear_column_family_one_in=0
```

- replay-heavy `db_stress` command reduced 12.4% elapsed time (23.69 -> 20.75 seconds)

Setup command:
```
$  ./db_stress -ops_per_thread=100000000 -sync_fault_injection=1 -db=/dev/shm/rocksdb_stress_db/ -expected_values_dir=/dev/shm/rocksdb_stress_expected --clear_column_family_one_in=0 & sleep 120; pkill -9 db_stress
```

Benchmark command:
```
$ /usr/bin/time ./db_stress -ops_per_thread=1 -reopen=0 -expected_values_dir=/dev/shm/rocksdb_stress_expected/ -db=/dev/shm/rocksdb_stress_db/ --clear_column_family_one_in=0 --destroy_db_initially=0
```

Reviewed By: zhichao-cao

Differential Revision: D33304580

Pulled By: ajkr

fbshipit-source-id: 0df10f87c1fc506e9484b6b42cea2ef96c7ecd65
2021-12-28 11:46:30 -08:00
Merlin Mao f6437ea4d7 Refactor TraceAnalyzer to use TraceRecord::Handler to avoid casting. (#8678)
Summary:
`TraceAnalyzer` privately inherits `TraceRecord::Handler` and `WriteBatch::Handler`.

`trace_analyzer_test` can pass with this change.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8678

Reviewed By: zhichao-cao

Differential Revision: D30459814

Pulled By: autopear

fbshipit-source-id: a27f59ac4600f7c3682830c9b1d9dc79e53425be
2021-08-23 17:18:27 -07:00
Merlin Mao ff8953380f Add iterator's lower and upper bounds to TraceRecord (#8677)
Summary:
Trace file V2 added lower/upper bounds to `Iterator::Seek()` and `Iterator::SeekForPrev()`. They were not used anywhere during the execution of a `TraceRecord`. Now they are added to be used by `ReadOptions` during `Iterator::Seek()` and `Iterator::SeekForPrev()` if they are set.

Added test cases in `DBTest2.TraceAndManualReplay`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8677

Reviewed By: zhichao-cao

Differential Revision: D30438255

Pulled By: autopear

fbshipit-source-id: 82563006be0b69155990e506a74951c18af8d288
2021-08-19 17:27:12 -07:00
Merlin Mao d10801e983 Allow Replayer to report the results of TraceRecords. (#8657)
Summary:
`Replayer::Execute()` can directly returns the result (e.g, request latency, DB::Get() return code, returned value, etc.)
`Replayer::Replay()` reports the results via a callback function.

New interface:
`TraceRecordResult` in "rocksdb/trace_record_result.h".

`DBTest2.TraceAndReplay` and `DBTest2.TraceAndManualReplay` are updated accordingly.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8657

Reviewed By: ajkr

Differential Revision: D30290216

Pulled By: autopear

fbshipit-source-id: 3c8d4e6b180ec743de1a9d9dcaee86064c74f0d6
2021-08-18 17:06:14 -07:00
Merlin Mao f58d276764 Make TraceRecord and Replayer public (#8611)
Summary:
New public interfaces:
`TraceRecord` and `TraceRecord::Handler`, available in "rocksdb/trace_record.h".
`Replayer`, available in `rocksdb/utilities/replayer.h`.

User can use `DB::NewDefaultReplayer()` to create a Replayer to auto/manual replay a trace file.

Unit tests:
- `./db_test2 --gtest_filter="DBTest2.TraceAndReplay"`: Updated with the internal API changes.
- `./db_test2 --gtest_filter="DBTest2.TraceAndManualReplay"`: New for manual replay.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8611

Reviewed By: ajkr

Differential Revision: D30266329

Pulled By: autopear

fbshipit-source-id: 1ecb3cbbedae0f6a67c18f0cc82e002b4d81b6f8
2021-08-11 19:32:46 -07:00
Zhichao Cao eec79b39a6 Add MultiGet to replay (#8577)
Summary:
When the trace contains the MultiGet record, with this PR, it can replay the MultiGet.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8577

Test Plan: make check and replay the real trace.

Reviewed By: anand1976

Differential Revision: D29864060

Pulled By: zhichao-cao

fbshipit-source-id: 5288d4fc9b6a3cb331de1e0c635d4e044dcb534a
2021-07-27 13:56:15 -07:00
Zhichao Cao 82a70e1470 Trace MultiGet Keys and CF_IDs to the trace file (#8421)
Summary:
Tracing the MultiGet information including timestamp, keys, and CF_IDs to the trace file for analyzing and replay.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8421

Test Plan: make check, add test to trace_analyzer_test

Reviewed By: anand1976

Differential Revision: D29221195

Pulled By: zhichao-cao

fbshipit-source-id: 30c677d6c39ab31ef4bbdf7e0d1fa1fd79f295ff
2021-06-18 15:04:05 -07:00
mrambacher a34dafe5ff Fix clang analyze for trace replace GetPayload (#8121)
Summary:
For some branches, I see an error during analyze on this code.  I do not know why it is not persistent, but this should address the error:

Logic error | Result of operation is garbage or undefined | trace_replay.cc | Replay | 436 | 30 | View Report

DecodeCFAndKey(trace.payload, &get_payload.cf_id, &get_payload.get_key);
--
433 | } else {
434 | TracerHelper::DecodeGetPayload(&trace, &get_payload);
  | 25←Calling 'TracerHelper::DecodeGetPayload'→ | 25 | ← | Calling 'TracerHelper::DecodeGetPayload' | →
25 | ← | Calling 'TracerHelper::DecodeGetPayload' | →
  | 29←Returning from 'TracerHelper::DecodeGetPayload'→ | 29 | ← | Returning from 'TracerHelper::DecodeGetPayload' | →
29 | ← | Returning from 'TracerHelper::DecodeGetPayload' | →
435 | }
436 | if (get_payload.cf_id > 0 &&
  | 30←The left operand of '>' is a garbage value | 30 | ← | The left operand of '>' is a garbage value
30 | ← | The left operand of '>' is a garbage value
437 | cf_map_.find(get_payload.cf_id) == cf_map_.end()) {
438 | return Status::Corruption("Invalid Column Family ID.");
439 | }

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8121

Reviewed By: zhichao-cao

Differential Revision: D27366022

Pulled By: mrambacher

fbshipit-source-id: 309c05dbab08cd7ab7f15389e8456f09196f37f6
2021-03-26 17:48:31 -07:00
mrambacher 3dff28cf9b Use SystemClock* instead of std::shared_ptr<SystemClock> in lower level routines (#8033)
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>.  The shared ptr has some performance degradation on certain hardware classes.

For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere.  For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it.  The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.

There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold.  In those cases, the shared pointer was preserved.

Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:

6.17: readrandom   :      28.046 micros/op 854902 ops/sec;   61.3 MB/s (355999 of 355999 found)
6.18: readrandom   :      32.615 micros/op 735306 ops/sec;   52.7 MB/s (290999 of 290999 found)
PR: readrandom   :      27.500 micros/op 871909 ops/sec;   62.5 MB/s (367999 of 367999 found)

(Note that the times for 6.18 are prior to revert of the SystemClock).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033

Reviewed By: pdillinger

Differential Revision: D27014563

Pulled By: mrambacher

fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
2021-03-15 04:34:11 -07:00
Zhichao Cao b0fd1cc45a Introduce a new trace file format (v 0.2) for better extension (#7977)
Summary:
The trace file record and payload encode is fixed, which requires complex backward compatibility resolving. This PR introduce a new trace file format, which makes it easier to add new entries to the payload and does not have backward compatible issues. V 0.1 is still supported in this PR. Added the tracing for lower_bound and upper_bound for iterator.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7977

Test Plan: make check. tested with old trace file in replay and analyzing.

Reviewed By: anand1976

Differential Revision: D26529948

Pulled By: zhichao-cao

fbshipit-source-id: ebb75a127ce3c07c25a1ccc194c551f917896a76
2021-02-18 23:05:35 -08:00
mrambacher 12f1137355 Add a SystemClock class to capture the time functions of an Env (#7858)
Summary:
Introduces and uses a SystemClock class to RocksDB.  This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.

Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead.  There are likely more places that can be changed, but this is a start to show what can/should be done.  Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.

There are several Env classes that implement these functions.  Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR.  It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).

Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858

Reviewed By: pdillinger

Differential Revision: D26006406

Pulled By: mrambacher

fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
2021-01-25 22:09:11 -08:00
mrambacher b7e1c5213f Add some simulator cache and block tracer tests to ASSERT_STATUS_CHECKED (#7305)
Summary:
More tests now pass.  When in doubt, I added a TODO comment to check what should happen with an ignored error.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7305

Reviewed By: akankshamahajan15

Differential Revision: D23301262

Pulled By: ajkr

fbshipit-source-id: 5f120edc7393560aefc0633250277bbc7e8de9e6
2020-08-24 16:43:31 -07:00
Zhichao Cao c8643edfc3 Fix multiple CF replay failure in db_bench replay (#6787)
Summary:
The multiple CF hash map is not passed to the multi-thread worker. When using multi-thread replay for multiple CFs, it will cause segment fault. Pass the cf_map to the argument.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6787

Test Plan: pass trace replay test.

Reviewed By: yhchiang

Differential Revision: D21339941

Pulled By: zhichao-cao

fbshipit-source-id: 434482b492287e6722c7cd5a706f057c5ec170ce
2020-05-01 00:03:38 -07:00
sdong fdf882ded2 Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433)
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433

Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.

Differential Revision: D19977691

fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
2020-02-20 12:09:57 -08:00
Zhichao Cao 0933360644 Fix the potential memory leak in trace_replay (#5955)
Summary:
In the previous PR https://github.com/facebook/rocksdb/issues/5934 , in the while loop, if/else if is used without ending with else to free the object referenced by ra, it might cause potential memory leak (warning during compiling). Fix it by changing the last "else if" to "else".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5955

Test Plan: pass make asan check, pass the USE_CLANG=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make -j64 analyze.

Differential Revision: D18071612

Pulled By: zhichao-cao

fbshipit-source-id: 51c00023d0c97c2921507254329aed55d56e1786
2019-10-22 16:39:46 -07:00
Zhichao Cao 7245fb5f63 Fix the potential memory leak of ReplayMultiThread (#5949)
Summary:
The pointer ra needs to be freed the status s returns not OK. In the previous  PR https://github.com/facebook/rocksdb/issues/5934  , the ra is not freed which might cause potential memory leak. Fix this issue by moving the clarification of ra inside the while loop and freeing it as desired.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5949

Test Plan: pass make asan check.

Differential Revision: D18045726

Pulled By: zhichao-cao

fbshipit-source-id: d5445b7b832c8bb1dafe008bafea7bfe9eb0b1ce
2019-10-21 15:05:01 -07:00
Zhichao Cao 526e3b9763 Enable trace_replay with multi-threads (#5934)
Summary:
In the current trace replay, all the queries are serialized and called by single threads. It may not simulate the original application query situations closely. The multi-threads replay is implemented in this PR. Users can set the number of threads to replay the trace. The queries generated according to the trace records are scheduled in the thread pool job queue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5934

Test Plan: test with make check and real trace replay.

Differential Revision: D17998098

Pulled By: zhichao-cao

fbshipit-source-id: 87eecf6f7c17a9dc9d7ab29dd2af74f6f60212c8
2019-10-18 14:13:50 -07:00
haoyuhuang aa71718ac3 Add block cache tracer. (#5410)
Summary:
This PR adds a help class block cache tracer to read/write block cache accesses. It uses the trace reader/writer to perform this task.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5410

Differential Revision: D15612843

Pulled By: HaoyuHuang

fbshipit-source-id: f30fd1e1524355ca87db5d533a5c086728b141ea
2019-06-06 11:24:39 -07:00
Siying Dong 5851cb7fdb Move util/trace_replay.* to trace_replay/ (#5376)
Summary:
util/ means for lower level libraries. trace_replay is highly integrated to DB and sometimes call DB. Move it out to a separate directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5376

Differential Revision: D15550938

Pulled By: siying

fbshipit-source-id: f46dce5ceffdc05a73f26379c7bb1b79ebe6c207
2019-06-03 13:25:26 -07:00
Renamed from util/trace_replay.cc (Browse further)