Summary:
Logically strip the user-defined timestamp when L0 files are created during flush when `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` is false. Logically stripping timestamp here means replacing the original user-defined timestamp with a mininum timestamp, which for now is hard coded to be all zeros bytes.
While working on this, I caught a missing piece on the `BlockBuilder` level for this feature. The current quick path `std::min(buffer_size, last_key_size)` needs a bit tweaking to work for this feature. When user-defined timestamp is stripped during block building, on writing first entry or right after resetting, `buffer` is empty and `buffer_size` is zero as usual. However, in follow-up writes, depending on the size of the stripped user-defined timestamp, and the size of the value, what's in `buffer` can sometimes be smaller than `last_key_size`, leading `std::min(buffer_size, last_key_size)` to truncate the `last_key`. Previous test doesn't caught the bug because in those tests, the size of the stripped user-defined timestamps bytes is smaller than the length of the value. In order to avoid the conditional operation, this PR changed the original trivial `std::min` operation into an arithmetic operation. Since this is a change in a hot and performance critical path, I did the following benchmark to check no observable regression is introduced.
```TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=50000000```
Compiled with DEBUG_LEVEL=0
Test vs. control runs simulaneous for better accuracy, units = ops/sec
PR vs base:
Round 1: 350652 vs 349055
Round 2: 365733 vs 364308
Round 3: 355681 vs 354475
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11557
Test Plan:
New timestamp specific test added or existing tests augmented, both are parameterized with `UserDefinedTimestampTestMode`:
`UserDefinedTimestampTestMode::kNormal` -> UDT feature enabled, write / read with min timestamp
`UserDefinedTimestampTestMode::kStripUserDefinedTimestamps` -> UDT feature enabled, write / read with min timestamp, set Options.persist_user_defined_timestamps to false.
```
make all check
./db_wal_test --gtest_filter="*WithTimestamp*"
./flush_job_test --gtest_filter="*WithTimestamp*"
./repair_test --gtest_filter="*WithTimestamp*"
./block_based_table_reader_test
```
Reviewed By: pdillinger
Differential Revision: D47027664
Pulled By: jowlyzhang
fbshipit-source-id: e729193b6334dfc63aaa736d684d907a022571f5
Summary:
Fix a use-after-move issue in block.cc and added some unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11505
Test Plan:
```
make all check
./block_test
```
Reviewed By: ltamasi
Differential Revision: D46506188
Pulled By: jowlyzhang
fbshipit-source-id: 316ed8ddd221c00b2bce2cf9fd47eea686cd74a5
Summary:
This patch adds support in `BlockBuilder` to strip user-defined timestamp from the `key` added via `Add(key, value)` and its equivalent APIs. The stripping logic is different when the key is either a user key or an internal key, so the `BlockBuilder` is created with a flag to indicate that. This patch also add support on the read path to APIs `NewIndexIterator`, `NewDataIterator` to support pad a min timestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11472
Test Plan:
Three test modes are added to parameterize existing tests:
UserDefinedTimestampTestMode::kNone -> UDT feature is not enabled
UserDefinedTimestampTestMode::kNormal -> UDT feature enabled, write / read with min timestamp
UserDefinedTimestampTestMode::kStripUserDefinedTimestamps -> UDT feature enabled, write / read with min timestamp, set `persist_user_defined_timestamps` where it applies to false.
The tests read/write with min timestamp so that point read and range scan can correctly read values in all three test modes.
`block_test` are parameterized to run with above three test modes and some additional parameteriazation
```
make all check
./block_test --gtest_filter="P/BlockTest*"
./block_test --gtest_filter="P/IndexBlockTest*"
```
Reviewed By: ltamasi
Differential Revision: D46200539
Pulled By: jowlyzhang
fbshipit-source-id: 59f5d6b584639976b69c2943eba723bd47d9b3c0
Summary:
... by bypassing tracking of last_key in BlockBuilder when
last_key is already known (for BlockBasedTableBuilder::data_block).
I tried extracting a base class of BlockBuilder without the last_key
tracking at all, but that became complicated by NewFlushBlockPolicy() in
the public API referencing BlockBuilder, which would need to be the base
class, and I don't want to replace nearly all the internal references to
BlockBuilder.
Possible follow-up:
* Investigate / consider using AddWithLastKey in more places
This improvement should stack with https://github.com/facebook/rocksdb/issues/9039
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9040
Test Plan:
TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=50000000
Compiled with DEBUG_LEVEL=0
Test vs. control runs simulaneous for better accuracy, units = ops/sec
Run 1: 278929 vs. 267799 (+4.2%)
Run 2: 281836 vs. 267432 (+5.4%)
Run 3: 278279 vs. 270454 (+2.9%)
(This benchmark is chosen to have detectable signal-to-noise, not to
represent expected improvement percent on real workloads.)
Reviewed By: mrambacher
Differential Revision: D31706033
Pulled By: pdillinger
fbshipit-source-id: 8a50fe6fefdd67b6d7665ffa687bbdcf5ad0d5ec
Summary:
Primarily, this change reserves space in the std::string for building
the next block once a block is finished, using `block_size` as
reservation size. Note: also tried reusing same std::string in the
common "unbuffered" path but that showed no benefit or regression.
Secondarily, this slightly reduces the work in resetting `restarts_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9039
Test Plan:
TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=50000000
Compiled with DEBUG_LEVEL=0
Test vs. control runs simulaneous for better accuracy, units = ops/sec
Run 1, Primary change only: 292697 vs. 280267 (+4.4%)
Run 2, Primary change only: 288763 vs. 279621 (+3.3%)
Run 1, Secondary change only: 260065 vs. 254232 (+2.3%)
Run 2, Secondary change only: 275925 vs. 272248 (+1.4%)
Run 1, Both changes: 284890 vs. 270372 (+5.3%)
Run 2, Both changes: 263511 vs. 258188 (+2.0%)
Reviewed By: zhichao-cao
Differential Revision: D31701253
Pulled By: pdillinger
fbshipit-source-id: 7e40810afbb98e6b6446955e77bda59e69b19ffd
Summary:
This PR adds support for pipelined & parallel compression optimization for `BlockBasedTableBuilder`. This optimization makes block building, block compression and block appending a pipeline, and uses multiple threads to accelerate block compression. Users can set `CompressionOptions::parallel_threads` greater than 1 to enable compression parallelism.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6262
Reviewed By: ajkr
Differential Revision: D20651306
fbshipit-source-id: 62125590a9c15b6d9071def9dc72589c1696a4cb
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
