Summary:
RocksDB's primary function is to facilitate read and write operations. Compactions, while essential for minimizing read amplifications and optimizing storage, can sometimes compete with these primary tasks. Especially during periods of high read/write traffic, it's vital to ensure that primary operations receive priority, avoiding any potential disruptions or slowdowns. Conversely, during off-peak times when traffic is minimal, it's an opportune moment to tackle low-priority tasks like TTL based compactions, optimizing resource usage.
In this PR, we are incorporating the concept of off-peak time into RocksDB by introducing `daily_offpeak_time_utc` within the DBOptions. This setting is formatted as "HH:mm-HH:mm" where the first one before "-" is the start time and the second one is the end time, inclusive. It will be later used for resource optimization in subsequent PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11893
Test Plan:
- New Unit Test Added - `DBOptionsTest::OffPeakTimes`
- Existing Unit Test Updated - `OptionsTest`, `OptionsSettableTest`
Reviewed By: pdillinger
Differential Revision: D49714553
Pulled By: jaykorean
fbshipit-source-id: fef51ea7c0fede6431c715bff116ddbb567c8752
Summary:
An internal user wants to be able to dynamically switch between Bloom and Ribbon filters, without a custom FilterPolicy. Making `filter_policy` mutable would actually make issue https://github.com/facebook/rocksdb/issues/10079 worse, because it would be a race on a pointer field, not just on scalars.
As a reasonable compromise until that is fixed, I am enabling dynamic control over Bloom vs. Ribbon choice by making
RibbonFilterPolicy::bloom_before_level mutable, and doing that safely by using an atomic.
I've also slightly tweaked the interpretation of that field so that setting it to INT_MAX really means "always Bloom."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11838
Test Plan: unit tests added/extended. crash test updated for SetOptions call and tested under TSAN with amplified probability (lower set_options_one_in).
Reviewed By: ajkr
Differential Revision: D49296284
Pulled By: pdillinger
fbshipit-source-id: e4251c077510df9a9c719876f482448c0d15402a
Summary:
Add a column family option `default_temperature` that will be used for file reading accounting purpose, such as io statistics, for files that don't have an explicitly set temperature.
This options is not a mutable one, changing its value would require a DB restart. This is to avoid the confusion that had the option being a mutable one, the users may expect it to take effect on all files immediately, while in reality, it would only become effective for SST files opened in the future.
This `default_temperature` also just affect accounting during one DB session. It won't be recorded in manifest as the file's temperature and can be different across different DB sessions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11708
Test Plan:
```
make all check
```
Reviewed By: pdillinger
Differential Revision: D48375763
Pulled By: jowlyzhang
fbshipit-source-id: eb756696c14a694c6e2a93d2bb6f040563194981
Summary:
For leveled compaction, RocksDB has a special kind of compaction with reason "kBottommmostFiles" that compacts bottommost level files to clear data held by snapshots (more detail in https://github.com/facebook/rocksdb/issues/3009). Such compactions can happen soon after a relevant snapshot is released. For some use cases, a bottommost file may contain only a small amount of keys that can be cleared, so compacting such a file has a high write amp. In addition, these bottommost files may be compacted in compactions with reason other than "kBottommmostFiles" if we wait for some time (so that enough data is ingested to trigger such a compaction). This PR introduces an option `bottommost_file_compaction_delay` to specify the delay of these bottommost level single file compactions.
* The main change is in `VersionStorageInfo::ComputeBottommostFilesMarkedForCompaction()` where we only add a file to `bottommost_files_marked_for_compaction_` if it oldest_snapshot is larger than its non-zero largest_seqno **and** the file is old enough. Note that if a file is not old enough but its largest_seqno is less than oldest_snapshot, we exclude it from the calculation of `bottommost_files_mark_threshold_`. This makes the change simpler, but such a file's eligibility for compaction will only be checked the next time `ComputeBottommostFilesMarkedForCompaction()` is called. This happens when a new Version is created (compaction, flush, SetOptions()...), a new enough snapshot is released (`VersionStorageInfo::UpdateOldestSnapshot()`) or when a compaction is picked and compaction score has to be re-calculated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11701
Test Plan:
* Add two unit tests to test when bottommost_file_compaction_delay > 0.
* Ran crash test with the new option.
Reviewed By: jaykorean, ajkr
Differential Revision: D48331564
Pulled By: cbi42
fbshipit-source-id: c584f3dc5f6354fce3ed65f4c6366dc450b15ba8
Summary:
Add a mutable column family option `memtable_max_range_deletions`. When non-zero, RocksDB will try to flush the current memtable after it has at least `memtable_max_range_deletions` range deletions. Java API is added and crash test is updated accordingly to randomly enable this option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11358
Test Plan:
* New unit test: `DBRangeDelTest.MemtableMaxRangeDeletions`
* Ran crash test `python3 ./tools/db_crashtest.py whitebox --simple --memtable_max_range_deletions=20` and saw logs showing flushed memtables usually with 20 range deletions.
Reviewed By: ajkr
Differential Revision: D46582680
Pulled By: cbi42
fbshipit-source-id: f23d6fa8d8264ecf0a18d55c113ba03f5e2504da
Summary:
... to improve data integrity validation during compaction.
A new option `compaction_verify_record_count` is introduced for this verification and is enabled by default. One exception when the verification is not done is when a compaction filter returns kRemoveAndSkipUntil which can cause CompactionIterator to seek until some key and hence not able to keep track of the number of keys processed.
For expected number of input keys, we sum over the number of total keys - number of range tombstones across compaction input files (`CompactionJob::UpdateCompactionStats()`). Table properties are consulted if `FileMetaData` is not initialized for some input file. Since table properties for all input files were also constructed during `DBImpl::NotifyOnCompactionBegin()`, `Compaction::GetTableProperties()` is introduced to reduce duplicated code.
For actual number of keys processed, each subcompaction will record its number of keys processed to `sub_compact->compaction_job_stats.num_input_records` and aggregated when all subcompactions finish (`CompactionJob::AggregateCompactionStats()`). In the case when some subcompaction encountered kRemoveAndSkipUntil from compaction filter and does not have accurate count, it propagates this information through `sub_compact->compaction_job_stats.has_num_input_records`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11571
Test Plan:
* Add a new unit test `DBCompactionTest.VerifyRecordCount` for the corruption case.
* All other unit tests for non-corrupted case.
* Ran crash test for a few hours: `python3 ./tools/db_crashtest.py whitebox --simple`
Reviewed By: ajkr
Differential Revision: D47131965
Pulled By: cbi42
fbshipit-source-id: cc8e94565dd526c4347e9d3843ecf32f6727af92
Summary:
add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are
1. checksum construction and verification in block.cc/h
2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h)
3. unit tests/crash test updates
Tests:
* Added unit tests
* Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576`
Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled.
Performance:
Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory.
For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates):
```
SETUP
make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench
./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none
BENCHMARK
./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE
The readrandom ops/sec looks like the following:
Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB
Main 240805 223604 198176 161653 139040
PR prot_bytes=0 238691 226693 200127 161082 141153
PR prot_bytes=1 214983 193199 178532 137013 108211
prot_bytes=1 vs -10% -15% -10.8% -15% -23%
prot_bytes=0
```
The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287
Reviewed By: ajkr
Differential Revision: D43970708
Pulled By: cbi42
fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940
Summary:
This option is immutable through the life time of the DB open. For now, updating its value between different DB open sessions is also a non compatible change. When I work on support for updating comparator, the type of updates accepted for this option will be supported then.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11362
Test Plan: `make check`
Reviewed By: ltamasi
Differential Revision: D44873870
Pulled By: jowlyzhang
fbshipit-source-id: aa02094754b58d99abf9af4c9a8108c1350254cb
Summary:
**Context/Summary:**
As instructed by convenience.h comments, a few deprecated APIs are removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11120
Test Plan:
- make check & CI
- eyeball check on test semantics.
Reviewed By: pdillinger
Differential Revision: D42937507
Pulled By: hx235
fbshipit-source-id: a9e4709387da01b1d0e9148c2e210f02e9746ee1
Summary:
We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support.
Most of changes were done through following comments:
unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'`
by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147
Test Plan: See CI
Reviewed By: pdillinger
Differential Revision: D42796341
fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
Summary:
Add option `preserve_internal_time_seconds` to preserve the internal
time information.
It's mostly for the migration of the existing data to tiered storage (
`preclude_last_level_data_seconds`). When the tiering feature is just
enabled, the existing data won't have the time information to decide if
it's hot or cold. Enabling this feature will start collect and preserve
the time information for the new data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10747
Reviewed By: siying
Differential Revision: D39910141
Pulled By: siying
fbshipit-source-id: 25c21638e37b1a7c44006f636b7d714fe7242138
Summary:
Try to align the compaction output file boundaries to the next level ones
(grandparent level), to reduce the level compaction write-amplification.
In level compaction, there are "wasted" data at the beginning and end of the
output level files. Align the file boundary can avoid such "wasted" compaction.
With this PR, it tries to align the non-bottommost level file boundaries to its
next level ones. It may cut file when the file size is large enough (at least
50% of target_file_size) and not too large (2x target_file_size).
db_bench shows about 12.56% compaction reduction:
```
TEST_TMPDIR=/data/dbbench2 ./db_bench --benchmarks=fillrandom,readrandom -max_background_jobs=12 -num=400000000 -target_file_size_base=33554432
# baseline:
Flush(GB): cumulative 25.882, interval 7.216
Cumulative compaction: 285.90 GB write, 162.36 MB/s write, 269.68 GB read, 153.15 MB/s read, 2926.7 seconds
# with this change:
Flush(GB): cumulative 25.882, interval 7.753
Cumulative compaction: 249.97 GB write, 141.96 MB/s write, 233.74 GB read, 132.74 MB/s read, 2534.9 seconds
```
The compaction simulator shows a similar result (14% with 100G random data).
As a side effect, with this PR, the SST file size can exceed the
target_file_size, but is capped at 2x target_file_size. And there will be
smaller files. Here are file size statistics when loading 100GB with the target
file size 32MB:
```
baseline this_PR
count 1.656000e+03 1.705000e+03
mean 3.116062e+07 3.028076e+07
std 7.145242e+06 8.046139e+06
```
The feature is enabled by default, to revert to the old behavior disable it
with `AdvancedColumnFamilyOptions.level_compaction_dynamic_file_size = false`
Also includes https://github.com/facebook/rocksdb/issues/1963 to cut file before skippable grandparent file. Which is for
use case like user adding 2 or more non-overlapping data range at the same
time, it can reduce the overlapping of 2 datasets in the lower levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10655
Reviewed By: cbi42
Differential Revision: D39552321
Pulled By: jay-zhuang
fbshipit-source-id: 640d15f159ab0cd973f2426cfc3af266fc8bdde2
Summary:
Change tiered compaction feature from `bottommost_temperture` to
`last_level_temperture`. The old option is kept for migration purpose only,
which is behaving the same as `last_level_temperture` and it will be removed in
the next release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10471
Test Plan: CI
Reviewed By: siying
Differential Revision: D38450621
Pulled By: jay-zhuang
fbshipit-source-id: cc1cdf8bad409376fec0152abc0a64fb72a91527
Summary:
Many workloads have temporal locality, where recently written items are read back in a short period of time. When using remote file systems, this is inefficient since it involves network traffic and higher latencies. Because of this, we would like to support prepopulating the blob cache during flush.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10298
Reviewed By: ltamasi
Differential Revision: D37908743
Pulled By: gangliao
fbshipit-source-id: 9feaed234bc719d38f0c02975c1ad19fa4bb37d1
Summary:
Which will be used for tiered storage to preclude hot data from
compacting to the cold tier (the last level).
Internally, adding seqno to time mapping. A periodic_task is scheduled
to record the current_seqno -> current_time in certain cadence. When
memtable flush, the mapping informaiton is stored in sstable property.
During compaction, the mapping information are merged and get the
approximate time of sequence number, which is used to determine if a key
is recently inserted or not and preclude it from the last level if it's
recently inserted (within the `preclude_last_level_data_seconds`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338
Test Plan: CI
Reviewed By: siying
Differential Revision: D37810187
Pulled By: jay-zhuang
fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f
Summary:
**Summary**
Make the mempurge option flag a Mutable Column Family option flag. Therefore, the mempurge feature can be dynamically toggled.
**Motivation**
RocksDB users prefer having the ability to switch features on and off without having to close and reopen the DB. This is particularly important if the feature causes issues and needs to be turned off. Dynamically changing a DB option flag does not seem currently possible.
Moreover, with this new change, the MemPurge feature can be toggled on or off independently between column families, which we see as a major improvement.
**Content of this PR**
This PR includes removal of the `experimental_mempurge_threshold` flag as a DB option flag, and its re-introduction as a `MutableCFOption` flag. I updated the code to handle dynamic changes of the flag (in particular inside the `FlushJob` file). Additionally, this PR includes a new test to demonstrate the capacity of the code to toggle the MemPurge feature on and off, as well as the addition in the `db_stress` module of 2 different mempurge threshold values (0.0 and 1.0) that can be randomly changed with the `set_option_one_in` flag. This is useful to stress test the dynamic changes.
**Benchmarking**
I will add numbers to prove that there is no performance impact within the next 12 hours.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10011
Reviewed By: pdillinger
Differential Revision: D36462357
Pulled By: bjlemaire
fbshipit-source-id: 5e3d63bdadf085c0572ecc2349e7dd9729ce1802
Summary:
Add `kRoundRobin` as a compaction priority. The implementation is as follows.
- Define a cursor as the smallest Internal key in the successor of the selected file. Add `vector<InternalKey> compact_cursor_` into `VersionStorageInfo` where each element (`InternalKey`) in `compact_cursor_` represents a cursor. In round-robin compaction policy, we just need to select the first file (assuming files are sorted) and also has the smallest InternalKey larger than/equal to the cursor. After a file is chosen, we create a new `Fsize` vector which puts the selected file is placed at the first position in `temp`, the next cursor is then updated as the smallest InternalKey in successor of the selected file (the above logic is implemented in `SortFileByRoundRobin`).
- After a compaction succeeds, typically `InstallCompactionResults()`, we choose the next cursor for the input level and save it to `edit`. When calling `LogAndApply`, we save the next cursor with its level into some local variable and finally apply the change to `vstorage` in `SaveTo` function.
- Cursors are persist pair by pair (<level, InternalKey>) in `EncodeTo` so that they can be reconstructed when reopening. An empty cursor will not be encoded to MANIFEST
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10107
Test Plan: add unit test (`CompactionPriRoundRobin`) in `compaction_picker_test`, add `kRoundRobin` priority in `CompactionPriTest` from `db_compaction_test`, and add `PersistRoundRobinCompactCursor` in `db_compaction_test`
Reviewed By: ajkr
Differential Revision: D37316037
Pulled By: littlepig2013
fbshipit-source-id: 9f481748190ace416079139044e00df2968fb1ee
Summary:
There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache.
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10155
Reviewed By: ltamasi
Differential Revision: D37150819
Pulled By: gangliao
fbshipit-source-id: b807c7916ea5d411588128f8e22a49f171388fe2
Summary:
Currently, if blob files are enabled (i.e. `enable_blob_files` is true), large values are extracted both during flush/recovery (when SST files are written into level 0 of the LSM tree) and during compaction into any LSM tree level. For certain use cases that have a mix of short-lived and long-lived values, it might make sense to support extracting large values only during compactions whose output level is greater than or equal to a specified LSM tree level (e.g. compactions into L1/L2/... or above). This could reduce the space amplification caused by large values that are turned into garbage shortly after being written at the price of some write amplification incurred by long-lived values whose extraction to blob files is delayed.
In order to achieve this, we would like to do the following:
- Add a new configuration option `blob_file_starting_level` (default: 0) to `AdvancedColumnFamilyOptions` (and `MutableCFOptions` and extend the related logic)
- Instantiate `BlobFileBuilder` in `BuildTable` (used during flush and recovery, where the LSM tree level is L0) and `CompactionJob` iff `enable_blob_files` is set and the LSM tree level is `>= blob_file_starting_level`
- Add unit tests for the new functionality, and add the new option to our stress tests (`db_stress` and `db_crashtest.py` )
- Add the new option to our benchmarking tool `db_bench` and the BlobDB benchmark script `run_blob_bench.sh`
- Add the new option to the `ldb` tool (see https://github.com/facebook/rocksdb/wiki/Administration-and-Data-Access-Tool)
- Ideally extend the C and Java bindings with the new option
- Update the BlobDB wiki to document the new option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10077
Reviewed By: ltamasi
Differential Revision: D36884156
Pulled By: gangliao
fbshipit-source-id: 942bab025f04633edca8564ed64791cb5e31627d
Summary:
Before this PR, BuildDBOptions() does not set a newly-added option, i.e.
enforce_single_del_contracts, causing OPTIONS files to contain incorrect
information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10027
Test Plan:
make check
Manually check OPTIONS file.
Reviewed By: ltamasi
Differential Revision: D36556125
Pulled By: riversand963
fbshipit-source-id: e1074715b22c328b68c19e9ad89aa5d67d864bb5
Summary:
Start tracking SST unique id in MANIFEST, which is used to verify with
SST properties to make sure the SST file is not overwritten or
misplaced. A DB option `try_verify_sst_unique_id` is introduced to
enable/disable the verification, if enabled, it opens all SST files
during DB-open to read the unique_id from table properties (default is
false), so it's recommended to use it with `max_open_files = -1` to
pre-open the files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9990
Test Plan: unittests, format-compatible test, mini-crash
Reviewed By: anand1976
Differential Revision: D36381863
Pulled By: jay-zhuang
fbshipit-source-id: 89ea2eb6b35ed3e80ead9c724eb096083eaba63f
Summary:
Add methods to set the various functions (Parse, Serialize, Equals) to the OptionTypeInfo. These methods simplify the number of constructors required for OptionTypeInfo and make the code a little clearer.
Add functions to the OptionTypeInfo for Prepare and Validate. These methods allow types other than Configurable and Customizable to have Prepare and Validate logic. These methods could be used by an option to guarantee that its settings were in a range or that a value was initialized.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9411
Reviewed By: pdillinger
Differential Revision: D36174849
Pulled By: mrambacher
fbshipit-source-id: 72517d8c6bab4723788a4c1a9e16590bff870125
Summary:
ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955
Test Plan: Watch CI tests
Reviewed By: riversand963
Differential Revision: D36176799
fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471
Summary:
The primary goal of this change is to add support for backing up and
restoring (applying on restore) file temperature metadata, without
committing to either the DB manifest or the FS reported "current"
temperatures being exclusive "source of truth".
To achieve this goal, we need to add temperature information to backup
metadata, which requires updated backup meta schema. Fortunately I
prepared for this in https://github.com/facebook/rocksdb/issues/8069, which began forward compatibility in version
6.19.0 for this kind of schema update. (Previously, backup meta schema
was not extensible! Making this schema update public will allow some
other "nice to have" features like taking backups with hard links, and
avoiding crc32c checksum computation when another checksum is already
available.) While schema version 2 is newly public, the default schema
version is still 1. Until we change the default, users will need to set
to 2 to enable features like temperature data backup+restore. New
metadata like temperature information will be ignored with a warning
in versions before this change and since 6.19.0. The metadata is
considered ignorable because a functioning DB can be restored without
it.
Some detail:
* Some renaming because "future schema" is now just public schema 2.
* Initialize some atomics in TestFs (linter reported)
* Add temperature hint support to SstFileDumper (used by BackupEngine)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9660
Test Plan:
related unit test majorly updated for the new functionality,
including some shared testing support for tracking temperatures in a FS.
Some other tests and testing hooks into production code also updated for
making the backup meta schema change public.
Reviewed By: ajkr
Differential Revision: D34686968
Pulled By: pdillinger
fbshipit-source-id: 3ac1fa3e67ee97ca8a5103d79cc87d872c1d862a
Summary:
- Make `compression_per_level` dynamical changeable with `SetOptions`;
- Fix a bug that `compression_per_level` is not used for flush;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9658
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D34700749
Pulled By: jay-zhuang
fbshipit-source-id: a23b9dfa7ad03d393c1d71781d19e91de796f49c
Summary:
Make FilterPolicy into a Customizable class. Allow new FilterPolicy to be discovered through the ObjectRegistry
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9590
Reviewed By: pdillinger
Differential Revision: D34327367
Pulled By: mrambacher
fbshipit-source-id: 37e7edac90ec9457422b72f359ab8ef48829c190
Summary:
In RocksDB option new_table_reader_for_compaction_inputs has
not effect on Compaction or on the behavior of RocksDB library.
Therefore, we are removing it in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9443
Test Plan: CircleCI
Reviewed By: ajkr
Differential Revision: D33788508
Pulled By: akankshamahajan15
fbshipit-source-id: 324ca6f12bfd019e9bd5e1b0cdac39be5c3cec7d
Summary:
The API is deprecated long time ago. Clean up the codebase by
removing it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9462
Test Plan: CI, fake release: D33835220
Reviewed By: riversand963
Differential Revision: D33835103
Pulled By: jay-zhuang
fbshipit-source-id: 6d2dc12c8e7fdbe2700865a3e61f0e3f78bd8184
Summary:
Add an option to set the WAL compression algorithm - wal_compression.
TODO: WAL compression is not implemented and will only support zstd initially. Will be added in subsequent diffs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9432
Reviewed By: pdillinger
Differential Revision: D33797275
Pulled By: sidroyc
fbshipit-source-id: 8db81d9c9cea5e2e4f1445d3aecad8106137b8e7
Summary:
The patch adds a new BlobDB configuration option `blob_compaction_readahead_size`
that can be used to enable prefetching data from blob files during compaction.
This is important when using storage with higher latencies like HDDs or remote filesystems.
If enabled, prefetching is used for all cases when blobs are read during compaction,
namely garbage collection, compaction filters (when the existing value has to be read from
a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187
Test Plan: Ran `make check` and the stress/crash test.
Reviewed By: riversand963
Differential Revision: D32565512
Pulled By: ltamasi
fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d
Summary:
XXH3 - latest hash function that is extremely fast on large
data, easily faster than crc32c on most any x86_64 hardware. In
integrating this hash function, I have handled the compression type byte
in a non-standard way to avoid using the streaming API (extra data
movement and active code size because of hash function complexity). This
approach got a thumbs-up from Yann Collet.
Existing functionality change:
* reject bad ChecksumType in options with InvalidArgument
This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is
likely to be handled through different configuration than ChecksumType.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069
Test Plan:
tests updated, and substantially expanded. Unit tests now check
that we don't accidentally change the values generated by the checksum
algorithms ("schema test") and that we properly handle
invalid/unrecognized checksum types in options or in file footer.
DBTestBase::ChangeOptions (etc.) updated from two to one configuration
changing from default CRC32c ChecksumType. The point of this test code
is to detect possible interactions among features, and the likelihood of
some bad interaction being detected by including configurations other
than XXH3 and CRC32c--and then not detected by stress/crash test--is
extremely low.
Stress/crash test also updated (manual run long enough to see it accepts
new checksum type). db_bench also updated for microbenchmarking
checksums.
### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3
crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op)
xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op)
xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op)
xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op)
crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op)
xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op)
xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op)
xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op)
crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op)
xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op)
xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op)
xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op)
As you can see, especially once warmed up, xxh3 is fastest.
### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
Test
for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done
Results (ops/sec)
for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done
results-0 252118 # kNoChecksum
results-1 251588 # kCRC32c
results-2 251863 # kxxHash
results-3 252016 # kxxHash64
results-4 252038 # kXXH3
Reviewed By: mrambacher
Differential Revision: D31905249
Pulled By: pdillinger
fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
Summary:
Currently, if Secondary Cache is provided to the lru cache, it is used by default. We add CacheTier to advanced_options.h to describe the cache tier we used. Add a `lowest_used_cache_tier` option to `DBOptions` (immutable) and pass it to BlockBasedTableReader to decide if secondary cache will be used or not. By default it is `CacheTier::kNonVolatileTier`, which means, we always use both block cache (kVolatileTier) and secondary cache (kNonVolatileTier). By set it to `CacheTier::kVolatileTier`, the DB will not use the secondary cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9050
Test Plan: added new tests
Reviewed By: anand1976
Differential Revision: D31744769
Pulled By: zhichao-cao
fbshipit-source-id: a0575ebd23e1c6dfcfc2b4c8578764e73b15bce6
Summary:
The current BlobDB garbage collection logic works by relocating the valid
blobs from the oldest blob files as they are encountered during compaction,
and cleaning up blob files once they contain nothing but garbage. However,
with sufficiently skewed workloads, it is theoretically possible to end up in a
situation when few or no compactions get scheduled for the SST files that contain
references to the oldest blob files, which can lead to increased space amp due
to the lack of GC.
In order to efficiently handle such workloads, the patch adds a new BlobDB
configuration option called `blob_garbage_collection_force_threshold`,
which signals to BlobDB to schedule targeted compactions for the SST files
that keep alive the oldest batch of blob files if the overall ratio of garbage in
the given blob files meets the threshold *and* all the given blob files are
eligible for GC based on `blob_garbage_collection_age_cutoff`. (For example,
if the new option is set to 0.9, targeted compactions will get scheduled if the
sum of garbage bytes meets or exceeds 90% of the sum of total bytes in the
oldest blob files, assuming all affected blob files are below the age-based cutoff.)
The net result of these targeted compactions is that the valid blobs in the oldest
blob files are relocated and the oldest blob files themselves cleaned up (since
*all* SST files that rely on them get compacted away).
These targeted compactions are similar to periodic compactions in the sense
that they force certain SST files that otherwise would not get picked up to undergo
compaction and also in the sense that instead of merging files from multiple levels,
they target a single file. (Note: such compactions might still include neighboring files
from the same level due to the need of having a "clean cut" boundary but they never
include any files from any other level.)
This functionality is currently only supported with the leveled compaction style
and is inactive by default (since the default value is set to 1.0, i.e. 100%).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8994
Test Plan: Ran `make check` and tested using `db_bench` and the stress/crash tests.
Reviewed By: riversand963
Differential Revision: D31489850
Pulled By: ltamasi
fbshipit-source-id: 44057d511726a0e2a03c5d9313d7511b3f0c4eab
Summary:
Made SliceTransform into a Customizable class.
Would be nice to write a test that stored and used a custom transform in an SST table.
There are a set of tests (DBBlockFliterTest.PrefixExtractor*, SamePrefixTest.InDomainTest, PrefixTest.PrefixAndWholeKeyTest that run the same with or without a SliceTransform/PrefixFilter. Is this expected?
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8641
Reviewed By: zhichao-cao
Differential Revision: D31142793
Pulled By: mrambacher
fbshipit-source-id: bb08672fccbfdc263dcae21f25a62307e1facda1
Summary:
This PR does the following:
-> Makes the MemTableRepFactory into a Customizable class and creatable/configurable via CreateFromString
-> Makes the existing implementations compatible with configurations
-> Moves the "SpecialRepFactory" test class into testutil, accessible via the ObjectRegistry or a NewSpecial API
New tests were added to validate the functionality and all existing tests pass. db_bench and memtablerep_bench were hand-tested to verify the functionality in those tools.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8419
Reviewed By: zhichao-cao
Differential Revision: D29558961
Pulled By: mrambacher
fbshipit-source-id: 81b7229636e4e649a0c914e73ac7b0f8454c931c
Summary:
- Fix issue with OptionType::Vector when the nested item is a Customizable with no names
- Fix issue with OptionType::Vector to appropriately wrap the elements in a Vector;
- Fix an issue with nested Customizable object with a null immutable object still appearing in the mutable options;
- Fix/Add tests for null/empty customizable objects
- Move the RegisterTestObjects from customizable_test into testutil.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8566
Reviewed By: zhichao-cao
Differential Revision: D30303724
Pulled By: mrambacher
fbshipit-source-id: 33fa8ea2a3b663210cb356da05e64aab7585b1b5
Summary:
- Changed MergeOperator, CompactionFilter, and CompactionFilterFactory into Customizable classes.
- Added Options/Configurable/Object Registration for TTL and Cassandra variants
- Changed the StringAppend MergeOperators to accept a string delimiter rather than a simple char. Made the delimiter into a configurable option
- Added tests for new functionality
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8481
Reviewed By: zhichao-cao
Differential Revision: D30136050
Pulled By: mrambacher
fbshipit-source-id: 271d1772835935b6773abaf018ee71e42f9491af
Summary:
Some URIs for creating instances (ala SecondaryCache) use complex URIs like (cache://name;prop=value). These URIs were treated as name-value properties. With this change, if the URI does not contain an "id=XX" setting, it will be treated as a single string value (and not an ID and map of name-value properties).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8547
Reviewed By: anand1976
Differential Revision: D29741386
Pulled By: mrambacher
fbshipit-source-id: 0621f62bec3a6699a7b66c7c0b5634b2856653aa
Summary:
If a Customizable option was not mutable, it would still appear in the list of mutable options when serialized. This meant that when the immutable options were used to configure another immutable object, an "option not changeable" status would be returned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8457
Reviewed By: zhichao-cao
Differential Revision: D29428298
Pulled By: mrambacher
fbshipit-source-id: 3945b0b822f8e5955a7c5590fe64dfd5bc1fe6a0
Summary:
Makes the Comparator class into a Customizable object. Added/Updated the CreateFromString method to create Comparators. Added test for using the ObjectRegistry to create one.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8336
Reviewed By: jay-zhuang
Differential Revision: D28999612
Pulled By: mrambacher
fbshipit-source-id: bff2cb2814eeb9fef6a00fddc61d6e34b6fbcf2e
Summary:
When a memtable is flushed, it will validate number of entries it reads, and compare the number with how many entries inserted into memtable. This serves as one sanity c\
heck against memory corruption. This change will also allow more counters to be added in the future for better validation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8288
Test Plan: Pass all existing tests
Reviewed By: ajkr
Differential Revision: D28369194
fbshipit-source-id: 7ff870380c41eab7f99eee508550dcdce32838ad
