mirror of https://github.com/facebook/rocksdb.git
275 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Andrew Ryan Chang
|
af2a36d2c7 |
Record newest_key_time as a table property (#13083)
Summary: This PR does two things: 1. Adds a new table property `newest_key_time` 2. Uses this property to improve TTL and temperature change compaction. ### Context The current `creation_time` table property should really be named `oldest_ancestor_time`. For flush output files, this is the oldest key time in the file. For compaction output files, this is the minimum among all oldest key times in the input files. The problem with using the oldest ancestor time for TTL compaction is that we may end up dropping files earlier than we should. What we really want is the newest (i.e. "youngest") key time. Right now we take a roundabout way to estimate this value -- we take the value of the _oldest_ key time for the _next_ (newer) SST file. This is also why the current code has checks for `index >= 1`. Our new property `newest_key_time` is set to the file creation time during flushes, and the max over all input files for compactions. There were some additional smaller changes that I had to make for testing purposes: - Refactoring the mock table reader to support specifying my own table properties - Refactoring out a test utility method `GetLevelFileMetadatas` that would otherwise be copy/pasted in 3 places Credit to cbi42 for the problem explanation and proposed solution ### Testing - Added a dedicated unit test to my `newest_key_time` logic in isolation (i.e. are we populating the property on flush and compaction) - Updated the existing unit tests (for TTL/temperate change compaction), which were comprehensive enough to break when I first made my code changes. I removed the test setup code which set the file metadata `oldest_ancestor_time`, so we know we are actually only using the new table property instead. Pull Request resolved: https://github.com/facebook/rocksdb/pull/13083 Reviewed By: cbi42 Differential Revision: D65298604 Pulled By: archang19 fbshipit-source-id: 898ef91b692ab33f5129a2a16b64ecadd4c32432 |
|
|
Peter Dillinger
|
a1a102ffce |
Steps toward deprecating implicit prefix seek, related fixes (#13026)
Summary: With some new use cases onboarding to prefix extractors/seek/filters, one of the risks is existing iterator code, e.g. for maintenance tasks, being unintentionally subject to prefix seek semantics. This is a longstanding known design flaw with prefix seek, and `prefix_same_as_start` and `auto_prefix_mode` were steps in the direction of making that obsolete. However, we can't just immediately set `total_order_seek` to true by default, because that would impact so much code instantly. Here we add a new DB option, `prefix_seek_opt_in_only` that basically allows users to transition to the future behavior when they are ready. When set to true, all iterators will be treated as if `total_order_seek=true` and then the only ways to get prefix seek semantics are with `prefix_same_as_start` or `auto_prefix_mode`. Related fixes / changes: * Make sure that `prefix_same_as_start` and `auto_prefix_mode` are compatible with (or override) `total_order_seek` (depending on your interpretation). * Fix a bug in which a new iterator after dynamically changing the prefix extractor might mix different prefix semantics between memtable and SSTs. Both should use the latest extractor semantics, which means iterators ignoring memtable prefix filters with an old extractor. And that means passing the latest prefix extractor to new memtable iterators that might use prefix seek. (Without the fix, the test added for this fails in many ways.) Suggested follow-up: * Investigate a FIXME where a MergeIteratorBuilder is created in db_impl.cc. No unit test detects a change in value that should impact correctness. * Make memtable prefix bloom compatible with `auto_prefix_mode`, which might require involving the memtablereps because we don't know at iterator creation time (only seek time) whether an auto_prefix_mode seek will be a prefix seek. * Add `prefix_same_as_start` testing to db_stress Pull Request resolved: https://github.com/facebook/rocksdb/pull/13026 Test Plan: tests updated, added. Add combination of `total_order_seek=true` and `auto_prefix_mode=true` to stress test. Ran `make blackbox_crash_test` for a long while. Manually ran tests with `prefix_seek_opt_in_only=true` as default, looking for unexpected issues. I inspected most of the results and migrated many tests to be ready for such a change (but not all). Reviewed By: ltamasi Differential Revision: D63147378 Pulled By: pdillinger fbshipit-source-id: 1f4477b730683d43b4be7e933338583702d3c25e |
|
|
Peter Dillinger
|
d96e67c2bf |
Fix flaky test DBTest2.VariousFileTemperatures (#12974)
Summary: ... apparently due to potentially not purging obsolete files after CompactRange Example: https://github.com/facebook/rocksdb/actions/runs/10564621261/job/29267393711?pr=12959 Pull Request resolved: https://github.com/facebook/rocksdb/pull/12974 Test Plan: reproduced failure with USE_CLANG=1 COERCE_CONTEXT_SWITCH=1, now fixed Reviewed By: cbi42 Differential Revision: D61812600 Pulled By: pdillinger fbshipit-source-id: d4b23e1a179bb8ec39875ed7a8ce1649fa3344bd |
|
|
Peter Dillinger
|
96340dbce2 |
Options for file temperature for more files (#12957)
Summary: We have a request to use the cold tier as primary source of truth for the DB, and to best support such use cases and to complement the existing options controlling SST file temperatures, we add two new DB options: * `metadata_write_temperature` for DB "small" files that don't contain much user data * `wal_write_temperature` for WALs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12957 Test Plan: Unit test included, though it's hard to be sure we've covered all the places Reviewed By: jowlyzhang Differential Revision: D61664815 Pulled By: pdillinger fbshipit-source-id: 8e19c9dd8fd2db059bb15f74938d6bc12002e82b |
|
|
Peter Dillinger
|
d2ef70872f |
Rename, deprecate `LogFile` and `VectorLogPtr` (#12695)
Summary: These names are confusing with `Logger` etc. so moving to `WalFile` etc. Other small, related name refactorings. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12695 Test Plan: Left most unit tests using old names as an API compatibility test. Non-test code compiles with deprecated names removed. No functional changes. Reviewed By: ajkr Differential Revision: D57747458 Pulled By: pdillinger fbshipit-source-id: 7b77596b9c20d865d43b9dc66c30c8bd2b3b424f |
|
|
Andrew Kryczka
|
4d5ebad971 |
Fix kBlockCacheTier read with table cache miss (#12443)
Summary: Thanks ltamasi for pointing out this bug. We were incorrectly overwriting `Status::Incomplete` with `Status::OK` after a table cache miss failed to open the file due to the read being memory-only (`kBlockCacheTier`). The fix is to simply stop overwriting the status. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12443 Reviewed By: cbi42 Differential Revision: D54930128 Pulled By: ajkr fbshipit-source-id: 52f912a2e93b46e71d79fc5968f8ca35b299213d |
|
|
Peter Dillinger
|
13ef21c22e |
default_write_temperature option (#12388)
Summary: Currently SST files that aren't applicable to last_level_temperature nor file_temperature_age_thresholds are written with temperature kUnknown, which is a little weird and doesn't support CF-based tiering. The default_temperature option only affects how kUnknown is interpreted for stats. This change adds a new per-CF option default_write_temperature that determines the temperature of new SST files when those other options do not apply. Also made a change to ignore last_level_temperature with FIFO compaction, because I found that could lead to an infinite loop in compaction. Needed follow-up: Fix temperature handling with external file ingestion Pull Request resolved: https://github.com/facebook/rocksdb/pull/12388 Test Plan: unit tests extended appropriately. (Ignore whitespace changes when reviewing.) Reviewed By: jowlyzhang Differential Revision: D54266574 Pulled By: pdillinger fbshipit-source-id: c9ec9a74dbf22be6e986f77f9689d05fea8ef0bb |
|
|
Peter Dillinger
|
d780e7a561 |
Remove `bottommost_temperature` (#12389)
Summary: deprecated option already replaced by `last_level_temperature`. (Keeping recognition of the option in old options files.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/12389 Test Plan: tests updated Reviewed By: jowlyzhang, cbi42 Differential Revision: D54267946 Pulled By: pdillinger fbshipit-source-id: 65c49b15e7394829c1f3b44edd4179d2daff6017 |
|
|
Yu Zhang
|
4bea83aa44 |
Remove the force mode for EnableFileDeletions API (#12337)
Summary: There is no strong reason for user to need this mode while on the other hand, its behavior is destructive. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12337 Reviewed By: hx235 Differential Revision: D53630393 Pulled By: jowlyzhang fbshipit-source-id: ce94b537258102cd98f89aa4090025663664dd78 |
|
|
Peter Dillinger
|
54cb9c77d9 |
Prefer static_cast in place of most reinterpret_cast (#12308)
Summary: The following are risks associated with pointer-to-pointer reinterpret_cast: * Can produce the "wrong result" (crash or memory corruption). IIRC, in theory this can happen for any up-cast or down-cast for a non-standard-layout type, though in practice would only happen for multiple inheritance cases (where the base class pointer might be "inside" the derived object). We don't use multiple inheritance a lot, but we do. * Can mask useful compiler errors upon code change, including converting between unrelated pointer types that you are expecting to be related, and converting between pointer and scalar types unintentionally. I can only think of some obscure cases where static_cast could be troublesome when it compiles as a replacement: * Going through `void*` could plausibly cause unnecessary or broken pointer arithmetic. Suppose we have `struct Derived: public Base1, public Base2`. If we have `Derived*` -> `void*` -> `Base2*` -> `Derived*` through reinterpret casts, this could plausibly work (though technical UB) assuming the `Base2*` is not dereferenced. Changing to static cast could introduce breaking pointer arithmetic. * Unnecessary (but safe) pointer arithmetic could arise in a case like `Derived*` -> `Base2*` -> `Derived*` where before the Base2 pointer might not have been dereferenced. This could potentially affect performance. With some light scripting, I tried replacing pointer-to-pointer reinterpret_casts with static_cast and kept the cases that still compile. Most occurrences of reinterpret_cast have successfully been changed (except for java/ and third-party/). 294 changed, 257 remain. A couple of related interventions included here: * Previously Cache::Handle was not actually derived from in the implementations and just used as a `void*` stand-in with reinterpret_cast. Now there is a relationship to allow static_cast. In theory, this could introduce pointer arithmetic (as described above) but is unlikely without multiple inheritance AND non-empty Cache::Handle. * Remove some unnecessary casts to void* as this is allowed to be implicit (for better or worse). Most of the remaining reinterpret_casts are for converting to/from raw bytes of objects. We could consider better idioms for these patterns in follow-up work. I wish there were a way to implement a template variant of static_cast that would only compile if no pointer arithmetic is generated, but best I can tell, this is not possible. AFAIK the best you could do is a dynamic check that the void* conversion after the static cast is unchanged. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12308 Test Plan: existing tests, CI Reviewed By: ltamasi Differential Revision: D53204947 Pulled By: pdillinger fbshipit-source-id: 9de23e618263b0d5b9820f4e15966876888a16e2 |
|
|
Peter Dillinger
|
76c834e441 |
Remove 'virtual' when implied by 'override' (#12319)
Summary:
... to follow modern C++ style / idioms.
Used this hack:
```
for FILE in `cat my_list_of_files`; do perl -pi -e 'BEGIN{undef $/;} s/ virtual( [^;{]* override)/$1/smg' $FILE; done
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12319
Test Plan: existing tests, CI
Reviewed By: jaykorean
Differential Revision: D53275303
Pulled By: pdillinger
fbshipit-source-id: bc0881af270aa8ef4d0ae4f44c5a6614b6407377
|
|
|
Hui Xiao
|
96fb7de3bc |
Rate-limit un-ratelimited flush/compaction code paths (#12290)
Summary: **Context/Summary:** We recently found out some code paths in flush and compaction aren't rate-limited when they should. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12290 Test Plan: existing UT** Reviewed By: anand1976 Differential Revision: D53066103 Pulled By: hx235 fbshipit-source-id: 9dc4cab5f841230d18e5504dc480ac523e9d3950 |
|
|
Andrew Kryczka
|
2dda7a0dd2 |
Detect compaction pressure at lower debt ratios (#12236)
Summary: This PR significantly reduces the compaction pressure threshold introduced in https://github.com/facebook/rocksdb/issues/12130 by a factor of 64x. The original number was too high to trigger in scenarios where compaction parallelism was needed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12236 Reviewed By: cbi42 Differential Revision: D52765685 Pulled By: ajkr fbshipit-source-id: 8298e966933b485de24f63165a00e672cb9db6c4 |
|
|
Andrew Kryczka
|
5a9ecf6614 |
Automated modernization (#12210)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/12210 Reviewed By: hx235 Differential Revision: D52559771 Pulled By: ajkr fbshipit-source-id: 1ccdd3a0180cc02bc0441f20b0e4a1db50841b03 |
|
|
Hui Xiao
|
06e593376c |
Group SST write in flush, compaction and db open with new stats (#11910)
Summary: ## Context/Summary Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity. For that, this PR does the following: - Tag different write IOs by passing down and converting WriteOptions to IOOptions - Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS Some related code refactory to make implementation cleaner: - Blob stats - Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info. - Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write. - Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority - Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification - Build table - TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables - Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder. This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more - Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority ## Test ### db bench Flush ``` ./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100 rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 ``` compaction, db oopen ``` Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279 rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213 rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66 ``` blob stats - just to make sure they aren't broken by this PR ``` Integrated Blob DB Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600 rocksdb.blobdb.blob.file.synced COUNT : 1 rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same) ``` ``` Stacked Blob DB Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876 rocksdb.blobdb.blob.file.synced COUNT : 8 rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same) ``` ### Rehearsal CI stress test Trigger 3 full runs of all our CI stress tests ### Performance Flush ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark; enable_statistics = true Pre-pr: avg 507515519.3 ns 497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908, Post-pr: avg 511971266.5 ns, regressed 0.88% 502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408, ``` Compaction ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 495346098.30 ns 492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846 Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97% 502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007 ``` Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats) ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 3848.10 ns 3814,3838,3839,3848,3854,3854,3854,3860,3860,3860 Post-pr: avg 3874.20 ns, regressed 0.68% 3863,3867,3871,3874,3875,3877,3877,3877,3880,3881 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910 Reviewed By: ajkr Differential Revision: D49788060 Pulled By: hx235 fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff |
|
|
Yu Zhang
|
c6c683a0ca |
Remove the default force behavior for `EnableFileDeletion` API (#12001)
Summary: Disabling file deletion can be critical for operations like making a backup, recovery from manifest IO error (for now). Ideally as long as there is one caller requesting file deletion disabled, it should be kept disabled until all callers agree to re-enable it. So this PR removes the default forcing behavior for the `EnableFileDeletion` API, and users need to explicitly pass the argument if they insisted on doing so knowing the consequence of what can be potentially disrupted. This PR removes the API's default argument value so it will cause breakage for all users that are relying on the default value, regardless of whether the forcing behavior is critical for them. When fixing this breakage, it's good to check if the forcing behavior is indeed needed and potential disruption is OK. This PR also makes unit test that do not need force behavior to do a regular enable file deletion. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12001 Reviewed By: ajkr Differential Revision: D51214683 Pulled By: jowlyzhang fbshipit-source-id: ca7b1ebf15c09eed00f954da2f75c00d2c6a97e4 |
|
|
Myth
|
0ff7665c95 |
Fix low priority write may cause crash when it is rate limited (#11932)
Summary: Fixed https://github.com/facebook/rocksdb/issues/11902 Pull Request resolved: https://github.com/facebook/rocksdb/pull/11932 Reviewed By: akankshamahajan15 Differential Revision: D50573356 Pulled By: hx235 fbshipit-source-id: adeb1abdc43b523b0357746055ce4a2eabde56a1 |
|
|
Changyu Bi
|
d5bc30befa |
Enforce status checking after Valid() returns false for IteratorWrapper (#11975)
Summary: ... when compiled with ASSERT_STATUS_CHECKED = 1. The main change is in iterator_wrapper.h. The remaining changes are just fixing existing unit tests. Adding this check to IteratorWrapper gives a good coverage as the class is used in many places, including child iterators under merging iterator, merging iterator under DB iter, file_iter under level iterator, etc. This change can catch the bug fixed in https://github.com/facebook/rocksdb/issues/11782. Future follow up: enable `ASSERT_STATUS_CHECKED=1` for stress test and for DEBUG_LEVEL=0. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11975 Test Plan: * `ASSERT_STATUS_CHECKED=1 DEBUG_LEVEL=2 make -j32 J=32 check` * I tried to run stress test with `ASSERT_STATUS_CHECKED=1`, but there are a lot of existing stress code that ignore status checking, and fail without the change in this PR. So defer that to a follow up task. Reviewed By: ajkr Differential Revision: D50383790 Pulled By: cbi42 fbshipit-source-id: 1a28ce0f5fdf1890f93400b26b3b1b3a287624ce |
|
|
Yu Zhang
|
03a74411c0 |
Add unit test for default temperature (#11722)
Summary: This piggy back the existing last level file temperature statistics test to test the default temperature becoming effective. While adding this unit test, I found that the approach to swap out and use default temperature in `VersionBuilder::LoadTableHandlers` will miss the L0 files created from flush, and only work for existing SST files, SST files created by compaction. So this PR moves that logic to `TableCache::GetTableReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11722 Test Plan: ``` ./db_test2 --gtest_filter="*LastLevelStatistics*" make all check ``` Reviewed By: pdillinger Differential Revision: D48489171 Pulled By: jowlyzhang fbshipit-source-id: ac29f7d484916f3218729594c5bb35c4f2979ac2 |
|
|
Changyu Bi
|
c2aad555c3 |
Add `CompressionOptions::checksum` for enabling ZSTD checksum (#11666)
Summary:
Optionally enable zstd checksum flag (
|
|
|
Changyu Bi
|
76ed9a3990 |
Add missing status check when compiling with `ASSERT_STATUS_CHECKED=1` (#11686)
Summary:
It seems the flag `-fno-elide-constructors` is incorrectly overwritten in Makefile by
|
|
|
Changyu Bi
|
e95cc1217d |
`CompactRange()` always compacts to bottommost level for leveled compaction (#11468)
Summary:
currently for leveled compaction, the max output level of a call to `CompactRange()` is pre-computed before compacting each level. This max output level is the max level whose key range overlaps with the manual compaction key range. However, during manual compaction, files in the max output level may be compacted down further by some background compaction. When this background compaction is a trivial move, there is a race condition and the manual compaction may not be able to compact all keys in the specified key range. This PR updates `CompactRange()` to always compact to the bottommost level to make this race condition more unlikely (it can still happen, see more in comment here:
|
|
|
Peter Dillinger
|
39f5846ec7 |
Much better stats for seeks and prefix filtering (#11460)
Summary: We want to know more about opportunities for better range filters, and the effectiveness of our own range filters. Currently the stats are very limited, essentially logging just hits and misses against prefix filters for range scans in BLOOM_FILTER_PREFIX_* without tracking the false positive rate. Perhaps confusingly, when prefix filters are used for point queries, the stats are currently going into the non-PREFIX tickers. This change does several things: * Introduce new stat tickers for seeks and related filtering, \*LEVEL_SEEK\* * Most importantly, allows us to see opportunities for range filtering. Specifically, we can count how many times a seek in an SST file accesses at least one data block, and how many times at least one value() is then accessed. If a data block was accessed but no value(), we can generally assume that the key(s) seen was(were) not of interest so could have been filtered with the right kind of filter, avoiding the data block access. * We can get the same level of detail when a filter (for now, prefix Bloom/ribbon) is used, or not. Specifically, we can infer a false positive rate for prefix filters (not available before) from the seek "false positive" rate: when a data block is accessed but no value() is called. (There can be other explanations for a seek false positive, but in typical iterator usage it would indicate a filter false positive.) * For efficiency, I wanted to avoid making additional calls to the prefix extractor (or key comparisons, etc.), which would be required if we wanted to more precisely detect filter false positives. I believe that instrumenting value() is the best balance of efficiency vs. accurately measuring what we are often interested in. * The stats are divided between last level and non-last levels, to help understand potential tiered storage use cases. * The old BLOOM_FILTER_PREFIX_* stats have a different meaning: no longer referring to iterators but to point queries using prefix filters. BLOOM_FILTER_PREFIX_TRUE_POSITIVE is added for computing the prefix false positive rate on point queries, which can be due to filter false positives as well as different keys with the same prefix. * Similarly, the non-PREFIX BLOOM_FILTER stats are now for whole key filtering only. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11460 Test Plan: unit tests updated, including updating many to pop the stat value since last read to improve test readability and maintainability. Performance test shows a consistent small improvement with these changes, both with clang and with gcc. CPU profile indicates that RecordTick is using less CPU, and this makes sense at least for a high filter miss rate. Before, we were recording two ticks per filter miss in iterators (CHECKED & USEFUL) and now recording just one (FILTERED). Create DB with ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 ``` And run simultaneous before&after with ``` TEST_TMPDIR=/dev/shm ./db_bench -readonly -benchmarks=seekrandom[-X1000] -num=10000000 -bloom_bits=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 -seek_nexts=1 -duration=20 -seed=43 -threads=8 -cache_size=1000000000 -statistics ``` Before: seekrandom [AVG 275 runs] : 189680 (± 222) ops/sec; 18.4 (± 0.0) MB/sec After: seekrandom [AVG 275 runs] : 197110 (± 208) ops/sec; 19.1 (± 0.0) MB/sec Reviewed By: ajkr Differential Revision: D46029177 Pulled By: pdillinger fbshipit-source-id: cdace79a2ea548d46c5900b068c5b7c3a02e5822 |
|
|
Jay Huh
|
586d78b31e |
Remove wait_unscheduled from waitForCompact internal API (#11443)
Summary: Context: In pull request https://github.com/facebook/rocksdb/issues/11436, we are introducing a new public API `waitForCompact(const WaitForCompactOptions& wait_for_compact_options)`. This API invokes the internal implementation `waitForCompact(bool wait_unscheduled=false)`. The unscheduled parameter indicates the compactions that are not yet scheduled but are required to process items in the queue. In certain cases, we are unable to wait for compactions, such as during a shutdown or when background jobs are paused. It is important to return the appropriate status in these scenarios. For all other cases, we should wait for all compaction and flush jobs, including the unscheduled ones. The primary purpose of this new API is to wait until the system has resolved its compaction debt. Currently, the usage of `wait_unscheduled` is limited to test code. This pull request eliminates the usage of wait_unscheduled. The internal `waitForCompact()` API now waits for unscheduled compactions unless the db is undergoing a shutdown. In the event of a shutdown, the API returns `Status::ShutdownInProgress()`. Additionally, a new parameter, `abort_on_pause`, has been introduced with a default value of `false`. This parameter addresses the possibility of waiting indefinitely for unscheduled jobs if `PauseBackgroundWork()` was called before `waitForCompact()` is invoked. By setting `abort_on_pause` to `true`, the API will immediately return `Status::Aborted`. Furthermore, all tests that previously called `waitForCompact(true)` have been fixed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11443 Test Plan: Existing tests that involve a shutdown in progress: - DBCompactionTest::CompactRangeShutdownWhileDelayed - DBTestWithParam::PreShutdownMultipleCompaction - DBTestWithParam::PreShutdownCompactionMiddle Reviewed By: pdillinger Differential Revision: D45923426 Pulled By: jaykorean fbshipit-source-id: 7dc93fe6a6841a7d9d2d72866fa647090dba8eae |
|
|
Hui Xiao
|
8f763bdeab |
Record and use the tail size to prefetch table tail (#11406)
Summary: **Context:** We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics. **Summary:** - Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()` - For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more. - Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest). Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406 Test Plan: 1. New UT 2. db bench Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison. ``` diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc index bd5669f0f..791484c1f 100644 --- a/table/block_based/block_based_table_reader.cc +++ b/table/block_based/block_based_table_reader.cc @@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail( &tail_prefetch_size); // Try file system prefetch - if (!file->use_direct_io() && !force_direct_prefetch) { + if (false && !file->use_direct_io() && !force_direct_prefetch) { if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority) .IsNotSupported()) { prefetch_buffer->reset(new FilePrefetchBuffer( diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc index ea40f5fa0..39a0ac385 100644 --- a/tools/db_bench_tool.cc +++ b/tools/db_bench_tool.cc @@ -4191,6 +4191,8 @@ class Benchmark { std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options)); } else { BlockBasedTableOptions block_based_options; + block_based_options.metadata_cache_options.partition_pinning = + PinningTier::kAll; block_based_options.checksum = static_cast<ChecksumType>(FLAGS_checksum_type); if (FLAGS_use_hash_search) { ``` Create DB ``` ./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none ``` ReadRandom ``` ./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none ``` (a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies()) ``` rocksdb.table.open.prefetch.tail.hit COUNT : 3395 rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614 ``` (b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies()) ``` rocksdb.table.open.prefetch.tail.hit COUNT : 14257 rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540 ``` As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR 3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR. Reviewed By: pdillinger Differential Revision: D45413346 Pulled By: hx235 fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064 |
|
|
sdong
|
4720ba4391 |
Remove RocksDB LITE (#11147)
Summary: We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support. Most of changes were done through following comments: unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'` by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147 Test Plan: See CI Reviewed By: pdillinger Differential Revision: D42796341 fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2 |
|
|
sdong
|
2800aa069a |
Remove compressed block cache (#11117)
Summary: Compressed block cache is replaced by compressed secondary cache. Remove the feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11117 Test Plan: See CI passes Reviewed By: pdillinger Differential Revision: D42700164 fbshipit-source-id: 6cbb24e460da29311150865f60ecb98637f9f67d |
|
|
Hui Xiao
|
98d5db5c2e |
Sort L0 files by newly introduced epoch_num (#10922)
Summary:
**Context:**
Sorting L0 files by `largest_seqno` has at least two inconvenience:
- File ingestion and compaction involving ingested files can create files of overlapping seqno range with the existing files. `force_consistency_check=true` will catch such overlap seqno range even those harmless overlap.
- For example, consider the following sequence of events ("key@n" indicates key at seqno "n")
- insert k1@1 to memtable m1
- ingest file s1 with k2@2, ingest file s2 with k3@3
- insert k4@4 to m1
- compact files s1, s2 and result in new file s3 of seqno range [2, 3]
- flush m1 and result in new file s4 of seqno range [1, 4]. And `force_consistency_check=true` will think s4 and s3 has file reordering corruption that might cause retuning an old value of k1
- However such caught corruption is a false positive since s1, s2 will not have overlapped keys with k1 or whatever inserted into m1 before ingest file s1 by the requirement of file ingestion (otherwise the m1 will be flushed first before any of the file ingestion completes). Therefore there in fact isn't any file reordering corruption.
- Single delete can decrease a file's largest seqno and ordering by `largest_seqno` can introduce a wrong ordering hence file reordering corruption
- For example, consider the following sequence of events ("key@n" indicates key at seqno "n", Credit to ajkr for this example)
- an existing SST s1 contains only k1@1
- insert k1@2 to memtable m1
- ingest file s2 with k3@3, ingest file s3 with k4@4
- insert single delete k5@5 in m1
- flush m1 and result in new file s4 of seqno range [2, 5]
- compact s1, s2, s3 and result in new file s5 of seqno range [1, 4]
- compact s4 and result in new file s6 of seqno range [2] due to single delete
- By the last step, we have file ordering by largest seqno (">" means "newer") : s5 > s6 while s6 contains a newer version of the k1's value (i.e, k1@2) than s5, which is a real reordering corruption. While this can be caught by `force_consistency_check=true`, there isn't a good way to prevent this from happening if ordering by `largest_seqno`
Therefore, we are redesigning the sorting criteria of L0 files and avoid above inconvenience. Credit to ajkr , we now introduce `epoch_num` which describes the order of a file being flushed or ingested/imported (compaction output file will has the minimum `epoch_num` among input files'). This will avoid the above inconvenience in the following ways:
- In the first case above, there will no longer be overlap seqno range check in `force_consistency_check=true` but `epoch_number` ordering check. This will result in file ordering s1 < s2 < s4 (pre-compaction) and s3 < s4 (post-compaction) which won't trigger false positive corruption. See test class `DBCompactionTestL0FilesMisorderCorruption*` for more.
- In the second case above, this will result in file ordering s1 < s2 < s3 < s4 (pre-compacting s1, s2, s3), s5 < s4 (post-compacting s1, s2, s3), s5 < s6 (post-compacting s4), which are correct file ordering without causing any corruption.
**Summary:**
- Introduce `epoch_number` stored per `ColumnFamilyData` and sort CF's L0 files by their assigned `epoch_number` instead of `largest_seqno`.
- `epoch_number` is increased and assigned upon `VersionEdit::AddFile()` for flush (or similarly for WriteLevel0TableForRecovery) and file ingestion (except for allow_behind_true, which will always get assigned as the `kReservedEpochNumberForFileIngestedBehind`)
- Compaction output file is assigned with the minimum `epoch_number` among input files'
- Refit level: reuse refitted file's epoch_number
- Other paths needing `epoch_number` treatment:
- Import column families: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`
- Repair: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`.
- Assigning new epoch_number to a file and adding this file to LSM tree should be atomic. This is guaranteed by us assigning epoch_number right upon `VersionEdit::AddFile()` where this version edit will be apply to LSM tree shape right after by holding the db mutex (e.g, flush, file ingestion, import column family) or by there is only 1 ongoing edit per CF (e.g, WriteLevel0TableForRecovery, Repair).
- Assigning the minimum input epoch number to compaction output file won't misorder L0 files (even through later `Refit(target_level=0)`). It's due to for every key "k" in the input range, a legit compaction will cover a continuous epoch number range of that key. As long as we assign the key "k" the minimum input epoch number, it won't become newer or older than the versions of this key that aren't included in this compaction hence no misorder.
- Persist `epoch_number` of each file in manifest and recover `epoch_number` on db recovery
- Backward compatibility with old db without `epoch_number` support is guaranteed by assigning `epoch_number` to recovered files by `NewestFirstBySeqno` order. See `VersionStorageInfo::RecoverEpochNumbers()` for more
- Forward compatibility with manifest is guaranteed by flexibility of `NewFileCustomTag`
- Replace `force_consistent_check` on L0 with `epoch_number` and remove false positive check like case 1 with `largest_seqno` above
- Due to backward compatibility issue, we might encounter files with missing epoch number at the beginning of db recovery. We will still use old L0 sorting mechanism (`NewestFirstBySeqno`) to check/sort them till we infer their epoch number. See usages of `EpochNumberRequirement`.
- Remove fix https://github.com/facebook/rocksdb/pull/5958#issue-511150930 and their outdated tests to file reordering corruption because such fix can be replaced by this PR.
- Misc:
- update existing tests with `epoch_number` so make check will pass
- update https://github.com/facebook/rocksdb/pull/5958#issue-511150930 tests to verify corruption is fixed using `epoch_number` and cover universal/fifo compaction/CompactRange/CompactFile cases
- assert db_mutex is held for a few places before calling ColumnFamilyData::NewEpochNumber()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10922
Test Plan:
- `make check`
- New unit tests under `db/db_compaction_test.cc`, `db/db_test2.cc`, `db/version_builder_test.cc`, `db/repair_test.cc`
- Updated tests (i.e, `DBCompactionTestL0FilesMisorderCorruption*`) under https://github.com/facebook/rocksdb/pull/5958#issue-511150930
- [Ongoing] Compatibility test: manually run
|
|
|
Yanqin Jin
|
3d0d6b8140 |
Make best-efforts recovery verify SST unique ID before Version construction (#10962)
Summary: The check for SST unique IDs added to best-efforts recovery (`Options::best_efforts_recovery` is true). With best_efforts_recovery being true, RocksDB will recover to the latest point in MANIFEST such that all valid SST files included up to this point pass unique ID checks as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10962 Test Plan: make check Reviewed By: pdillinger Differential Revision: D41378241 Pulled By: riversand963 fbshipit-source-id: a036064e2c17dec13d080a24ef2a9f85d607b16c |
|
|
Andrew Kryczka
|
db9cbddc6f |
Deflake DBTest2.TraceAndReplay by relaxing latency checks (#10979)
Summary: Since the latency measurement uses real time it is possible for the operation to complete in zero microseconds and then fail these checks. We saw this with the operation that invokes Get() on an invalid CF. This PR relaxes the assertions to allow for operations completing in zero microseconds. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10979 Reviewed By: riversand963 Differential Revision: D41478300 Pulled By: ajkr fbshipit-source-id: 50ef096bd8f0162b31adb46f54ae6ddc337d0a5e |
|
|
Andrew Kryczka
|
5cf6ab6f31 |
Ran clang-format on db/ directory (#10910)
Summary: Ran `find ./db/ -type f | xargs clang-format -i`. Excluded minor changes it tried to make on db/db_impl/. Everything else it changed was directly under db/ directory. Included minor manual touchups mentioned in PR commit history. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10910 Reviewed By: riversand963 Differential Revision: D40880683 Pulled By: ajkr fbshipit-source-id: cfe26cda05b3fb9a72e3cb82c286e21d8c5c4174 |
|
|
Jay Zhuang
|
f726d29a82 |
Allow penultimate level output for the last level only compaction (#10822)
Summary: Allow the last level only compaction able to output result to penultimate level if the penultimate level is empty. Which will also block the other compaction output to the penultimate level. (it includes the PR https://github.com/facebook/rocksdb/issues/10829) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10822 Reviewed By: siying Differential Revision: D40389180 Pulled By: jay-zhuang fbshipit-source-id: 4e5dcdce307795b5e07b5dd1fa29dd75bb093bad |
|
|
Jay Zhuang
|
f3cc66632b |
Align compaction output file boundaries to the next level ones (#10655)
Summary:
Try to align the compaction output file boundaries to the next level ones
(grandparent level), to reduce the level compaction write-amplification.
In level compaction, there are "wasted" data at the beginning and end of the
output level files. Align the file boundary can avoid such "wasted" compaction.
With this PR, it tries to align the non-bottommost level file boundaries to its
next level ones. It may cut file when the file size is large enough (at least
50% of target_file_size) and not too large (2x target_file_size).
db_bench shows about 12.56% compaction reduction:
```
TEST_TMPDIR=/data/dbbench2 ./db_bench --benchmarks=fillrandom,readrandom -max_background_jobs=12 -num=400000000 -target_file_size_base=33554432
# baseline:
Flush(GB): cumulative 25.882, interval 7.216
Cumulative compaction: 285.90 GB write, 162.36 MB/s write, 269.68 GB read, 153.15 MB/s read, 2926.7 seconds
# with this change:
Flush(GB): cumulative 25.882, interval 7.753
Cumulative compaction: 249.97 GB write, 141.96 MB/s write, 233.74 GB read, 132.74 MB/s read, 2534.9 seconds
```
The compaction simulator shows a similar result (14% with 100G random data).
As a side effect, with this PR, the SST file size can exceed the
target_file_size, but is capped at 2x target_file_size. And there will be
smaller files. Here are file size statistics when loading 100GB with the target
file size 32MB:
```
baseline this_PR
count 1.656000e+03 1.705000e+03
mean 3.116062e+07 3.028076e+07
std 7.145242e+06 8.046139e+06
```
The feature is enabled by default, to revert to the old behavior disable it
with `AdvancedColumnFamilyOptions.level_compaction_dynamic_file_size = false`
Also includes https://github.com/facebook/rocksdb/issues/1963 to cut file before skippable grandparent file. Which is for
use case like user adding 2 or more non-overlapping data range at the same
time, it can reduce the overlapping of 2 datasets in the lower levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10655
Reviewed By: cbi42
Differential Revision: D39552321
Pulled By: jay-zhuang
fbshipit-source-id: 640d15f159ab0cd973f2426cfc3af266fc8bdde2
|
|
|
Peter Dillinger
|
ef443cead4 |
Refactor to avoid confusing "raw block" (#10408)
Summary: We have a lot of confusing code because of mixed, sometimes completely opposite uses of of the term "raw block" or "raw contents", sometimes within the same source file. For example, in `BlockBasedTableBuilder`, `raw_block_contents` and `raw_size` generally referred to uncompressed block contents and size, while `WriteRawBlock` referred to writing a block that is already compressed if it is going to be. Meanwhile, in `BlockBasedTable`, `raw_block_contents` either referred to a (maybe compressed) block with trailer, or a maybe compressed block maybe without trailer. (Note: left as follow-up work to use C++ typing to better sort out the various kinds of BlockContents.) This change primarily tries to apply some consistent terminology around the kinds of block representations, avoiding the unclear "raw". (Any meaning of "raw" assumes some bias toward the storage layer or toward the logical data layer.) Preferred terminology: * **Serialized block** - bytes that go into storage. For block-based table (usually the case) this includes the block trailer. WART: block `size` may or may not include the trailer; need to be clear about whether it does or not. * **Maybe compressed block** - like a serialized block, but without the trailer (or no promise of including a trailer). Must be accompanied by a CompressionType. * **Uncompressed block** - "payload" bytes that are either stored with no compression, used as input to compression function, or result of decompression function. * **Parsed block** - an in-memory form of a block in block cache, as it is used by the table reader. Different C++ types are used depending on the block type (see block_like_traits.h). Other refactorings: * Misc corrections/improvements of internal API comments * Remove a few misleading / unhelpful / redundant comments. * Use move semantics in some places to simplify contracts * Use better parameter names to indicate which parameters are used for outputs * Remove some extraneous `extern` * Various clean-ups to `CacheDumperImpl` (mostly unnecessary code) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10408 Test Plan: existing tests Reviewed By: akankshamahajan15 Differential Revision: D38172617 Pulled By: pdillinger fbshipit-source-id: ccb99299f324ac5ca46996d34c5089621a4f260c |
|
|
Peter Dillinger
|
6de7081cf3 |
Always verify SST unique IDs on SST file open (#10532)
Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2 |
|
|
Gang Liao
|
275cd80cdb |
Add a blob-specific cache priority (#10461)
Summary: RocksDB's `Cache` abstraction currently supports two priority levels for items: high (used for frequently accessed/highly valuable SST metablocks like index/filter blocks) and low (used for SST data blocks). Blobs are typically lower-value targets for caching than data blocks, since 1) with BlobDB, data blocks containing blob references conceptually form an index structure which has to be consulted before we can read the blob value, and 2) cached blobs represent only a single key-value, while cached data blocks generally contain multiple KVs. Since we would like to make it possible to use the same backing cache for the block cache and the blob cache, it would make sense to add a new, lower-than-low cache priority level (bottom level) for blobs so data blocks are prioritized over them. This task is a part of https://github.com/facebook/rocksdb/issues/10156 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10461 Reviewed By: siying Differential Revision: D38672823 Pulled By: ltamasi fbshipit-source-id: 90cf7362036563d79891f47be2cc24b827482743 |
|
|
Jay Zhuang
|
3f763763aa |
Change `bottommost_temperture` to `last_level_temperture` (#10471)
Summary: Change tiered compaction feature from `bottommost_temperture` to `last_level_temperture`. The old option is kept for migration purpose only, which is behaving the same as `last_level_temperture` and it will be removed in the next release. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10471 Test Plan: CI Reviewed By: siying Differential Revision: D38450621 Pulled By: jay-zhuang fbshipit-source-id: cc1cdf8bad409376fec0152abc0a64fb72a91527 |
|
|
Peter Dillinger
|
65036e4217 |
Revert "Add a blob-specific cache priority (#10309)" (#10434)
Summary:
This reverts commit
|
|
|
Gang Liao
|
8d178090be |
Add a blob-specific cache priority (#10309)
Summary: RocksDB's `Cache` abstraction currently supports two priority levels for items: high (used for frequently accessed/highly valuable SST metablocks like index/filter blocks) and low (used for SST data blocks). Blobs are typically lower-value targets for caching than data blocks, since 1) with BlobDB, data blocks containing blob references conceptually form an index structure which has to be consulted before we can read the blob value, and 2) cached blobs represent only a single key-value, while cached data blocks generally contain multiple KVs. Since we would like to make it possible to use the same backing cache for the block cache and the blob cache, it would make sense to add a new, lower-than-low cache priority level (bottom level) for blobs so data blocks are prioritized over them. This task is a part of https://github.com/facebook/rocksdb/issues/10156 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10309 Reviewed By: ltamasi Differential Revision: D38211655 Pulled By: gangliao fbshipit-source-id: 65ef33337db4d85277cc6f9782d67c421ad71dd5 |
|
|
Jay Zhuang
|
faa0f9723c |
Tiered compaction: integrate Seqno time mapping with per key placement (#10370)
Summary: Using the Sequence number to time mapping to decide if a key is hot or not in compaction and place it in the corresponding level. Note: the feature is not complete, level compaction will run indefinitely until all penultimate level data is cold and small enough to not trigger compaction. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10370 Test Plan: CI * Run basic db_bench for universal compaction manually Reviewed By: siying Differential Revision: D37892338 Pulled By: jay-zhuang fbshipit-source-id: 792bbd91b1ccc2f62b5d14c53118434bcaac4bbe |
|
|
Jay Zhuang
|
69a18b9bad |
VerifySstUniqueIds status is overrided for multi CFs (#10247)
Summary: There's bug that basically we only report the last CF's VerifySstUniqueIds() result: https://github.com/facebook/rocksdb/pull/9990#discussion_r877268810 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10247 Test Plan: CI Reviewed By: pdillinger Differential Revision: D37384265 Pulled By: jay-zhuang fbshipit-source-id: d462ad0eab39c9145c45a3db9c45539d5d76f7dd |
|
|
sdong
|
a9565ccb26 |
Try to trivial move more than one files (#10190)
Summary: In leveled compaction, try to trivial move more than one files if possible, up to 4 files or max_compaction_bytes. This is to allow higher write throughput for some use cases where data is loaded in sequential order, where appying compaction results is the bottleneck. When pick up a file to compact and it doesn't have overlapping files in the next level, try to expand to the next file if there is still no overlapping. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10190 Test Plan: Add some unit tests. For performance, Try to run ./db_bench_multi_move --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=5000000 --num=100000000 --value_size=1000 -level_compaction_dynamic_level_bytes Together with https://github.com/facebook/rocksdb/pull/10188 , stalling will be eliminated in this benchmark. Reviewed By: jay-zhuang Differential Revision: D37230647 fbshipit-source-id: 42b260f545c46abc5d90335ac2bbfcd09602b549 |
|
|
Peter Dillinger
|
ad135f3ffd |
Document design/specification bugs with auto_prefix_mode (#10144)
Summary: auto_prefix_mode is designed to use prefix filtering in a particular "safe" set of cases where the upper bound and the seek key have different prefixes: where the upper bound is the "same length immediate successor". These conditions are not sufficient to guarantee the same iteration results as total_order_seek if the DB contains "short" keys, less than the "full" (maximum) prefix length. We are not simply disabling the optimization in these successor cases because it is likely that users are essentially getting what they want out of existing usage. Especially if users are constructing successor bounds with the intention of doing a prefix-bounded seek, the existing behavior is more expected than the total_order_seek behavior. Consequently, for now we reconcile the bad specification of behavior by documenting the existing mismatch with total_order_seek. A closely related issue affects hypothetical comparators like ReverseBytewiseComparator: if they "correctly" implement IsSameLengthImmediateSuccessor, auto_prefix_mode could omit more entries (other than "short" keys noted above). Luckily, the built-in ReverseBytewiseComparator has an "incorrect" implementation of IsSameLengthImmediateSuccessor that effectively prevents prefix optimization and, thus, the bug. This is now documented as a new constraint on IsSameLengthImmediateSuccessor, and the implementation tweaked to be simply "safe" rather than "incorrect". This change also includes unit test updates to demonstrate the above issues. (Test was cleaned up for readability and simplicity.) Intended follow-up: * Tweak documented axioms for prefix_extractor (more details then) * Consider some sort of fix for this case. I don't know what that would look like without breaking the performance of existing code. Perhaps if all keys in an SST file have prefixes that are "full length," we can track that fact and use it to allow optimization with the "same length immediate successor", but that would only apply to new files. * Consider a better system of specifying prefix bounds Pull Request resolved: https://github.com/facebook/rocksdb/pull/10144 Test Plan: test updates included Reviewed By: siying Differential Revision: D37052710 Pulled By: pdillinger fbshipit-source-id: 5f63b7d65f3f214e4b143e0f9aa1749527c587db |
|
|
zczhu
|
3ee6c9baec |
Consolidate manual_compaction_paused_ check (#10070)
Summary: As pointed out by [https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422](https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422), check `manual_compaction_paused` and `manual_compaction_canceled` can be reduced by setting `*canceled` to be true in `DisableManualCompaction()` and `*canceled` to be false in the last time calling `EnableManualCompaction()`. Changed Tests: The origin `DBTest2.PausingManualCompaction1` uses a callback function to increase `manual_compaction_paused` and the origin CompactionJob/CompactionIterator with `manual_compaction_paused` can detect this. I changed the callback function so that it sets `*canceled` as true if `canceled` is not `nullptr` (to notify CompactionJob/CompactionIterator the compaction has been canceled). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10070 Test Plan: This change does not introduce new features, but some slight difference in compaction implementation. Run the same manual compaction unit tests as before (e.g., PausingManualCompaction[1-4], CancelManualCompaction[1-2], CancelManualCompactionWithListener in db_test2, and db_compaction_test). Reviewed By: ajkr Differential Revision: D36949133 Pulled By: littlepig2013 fbshipit-source-id: c5dc4c956fbf8f624003a0f5ad2690240063a821 |
|
|
Jay Zhuang
|
a020031552 |
Add kLastTemperature as temperature high bound (#10044)
Summary: Only used as temperature high bound for current code, may increase with more temperatures added. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10044 Test Plan: ci Reviewed By: siying Differential Revision: D36633410 Pulled By: jay-zhuang fbshipit-source-id: eecdfa7623c31778c31d789902eacf78aad7b482 |
|
|
Jay Zhuang
|
23f34c7ae5 |
Skip ZSTD dict tests if the version doesn't support it (#10046)
Summary: For example, the default ZSTD version for ubuntu20 is 1.4.4, which will fail the test `PresetCompressionDict`: ``` db/db_test_util.cc:607: Failure Invalid argument: zstd finalizeDictionary cannot be used because ZSTD 1.4.5+ is not linked with the binary. terminate called after throwing an instance of 'testing::internal::GoogleTestFailureException' ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10046 Test Plan: test pass with old zstd Reviewed By: cbi42 Differential Revision: D36640067 Pulled By: jay-zhuang fbshipit-source-id: b1c49fb7295f57f4515ce4eb3a52ae7d7e45da86 |
|
|
Changyu Bi
|
cc23b46da1 |
Support using ZDICT_finalizeDictionary to generate zstd dictionary (#9857)
Summary:
An untrained dictionary is currently simply the concatenation of several samples. The ZSTD API, ZDICT_finalizeDictionary(), can improve such a dictionary's effectiveness at low cost. This PR changes how dictionary is created by calling the ZSTD ZDICT_finalizeDictionary() API instead of creating raw content dictionary (when max_dict_buffer_bytes > 0), and pass in all buffered uncompressed data blocks as samples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9857
Test Plan:
#### db_bench test for cpu/memory of compression+decompression and space saving on synthetic data:
Set up: change the parameter [here](
|
|
|
Peter Dillinger
|
280b9f371a |
Fix auto_prefix_mode performance with partitioned filters (#10012)
Summary: Essentially refactored the RangeMayExist implementation in FullFilterBlockReader to FilterBlockReaderCommon so that it applies to partitioned filters as well. (The function is not called for the block-based filter case.) RangeMayExist is essentially a series of checks around a possible PrefixMayExist, and I'm confident those checks should be the same for partitioned as for full filters. (I think it's likely that bugs remain in those checks, but this change is overall a simplifying one.) Added auto_prefix_mode support to db_bench Other small fixes as well Fixes https://github.com/facebook/rocksdb/issues/10003 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10012 Test Plan: Expanded unit test that uses statistics to check for filter optimization, fails without the production code changes here Performance: populate two DBs with ``` TEST_TMPDIR=/dev/shm/rocksdb_nonpartitioned ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 TEST_TMPDIR=/dev/shm/rocksdb_partitioned ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 -partition_index_and_filters ``` Observe no measurable change in non-partitioned performance ``` TEST_TMPDIR=/dev/shm/rocksdb_nonpartitioned ./db_bench -benchmarks=seekrandom[-X1000] -num=10000000 -readonly -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 -auto_prefix_mode -cache_index_and_filter_blocks=1 -cache_size=1000000000 -duration 20 ``` Before: seekrandom [AVG 15 runs] : 11798 (± 331) ops/sec After: seekrandom [AVG 15 runs] : 11724 (± 315) ops/sec Observe big improvement with partitioned (also supported by bloom use statistics) ``` TEST_TMPDIR=/dev/shm/rocksdb_partitioned ./db_bench -benchmarks=seekrandom[-X1000] -num=10000000 -readonly -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 -partition_index_and_filters -auto_prefix_mode -cache_index_and_filter_blocks=1 -cache_size=1000000000 -duration 20 ``` Before: seekrandom [AVG 12 runs] : 2942 (± 57) ops/sec After: seekrandom [AVG 12 runs] : 7489 (± 184) ops/sec Reviewed By: siying Differential Revision: D36469796 Pulled By: pdillinger fbshipit-source-id: bcf1e2a68d347b32adb2b27384f945434e7a266d |
|
|
Jay Zhuang
|
c6d326d3d7 |
Track SST unique id in MANIFEST and verify (#9990)
Summary: Start tracking SST unique id in MANIFEST, which is used to verify with SST properties to make sure the SST file is not overwritten or misplaced. A DB option `try_verify_sst_unique_id` is introduced to enable/disable the verification, if enabled, it opens all SST files during DB-open to read the unique_id from table properties (default is false), so it's recommended to use it with `max_open_files = -1` to pre-open the files. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9990 Test Plan: unittests, format-compatible test, mini-crash Reviewed By: anand1976 Differential Revision: D36381863 Pulled By: jay-zhuang fbshipit-source-id: 89ea2eb6b35ed3e80ead9c724eb096083eaba63f |
|
|
gitbw95
|
4da34b97ee |
Set Read rate limiter priority dynamically and pass it to FS (#9996)
Summary: ### Context: Background compactions and flush generate large reads and writes, and can be long running, especially for universal compaction. In some cases, this can impact foreground reads and writes by users. ### Solution User, Flush, and Compaction reads share some code path. For this task, we update the rate_limiter_priority in ReadOptions for code paths (e.g. FindTable (mainly in BlockBasedTable::Open()) and various iterators), and eventually update the rate_limiter_priority in IOOptions for FSRandomAccessFile. **This PR is for the Read path.** The **Read:** dynamic priority for different state are listed as follows: | State | Normal | Delayed | Stalled | | ----- | ------ | ------- | ------- | | Flush (verification read in BuildTable()) | IO_USER | IO_USER | IO_USER | | Compaction | IO_LOW | IO_USER | IO_USER | | User | User provided | User provided | User provided | We will respect the read_options that the user provided and will not set it. The only sst read for Flush is the verification read in BuildTable(). It claims to be "regard as user read". **Details** 1. Set read_options.rate_limiter_priority dynamically: - User: Do not update the read_options. Use the read_options that the user provided. - Compaction: Update read_options in CompactionJob::ProcessKeyValueCompaction(). - Flush: Update read_options in BuildTable(). 2. Pass the rate limiter priority to FSRandomAccessFile functions: - After calling the FindTable(), read_options is passed through GetTableReader(table_cache.cc), BlockBasedTableFactory::NewTableReader(block_based_table_factory.cc), and BlockBasedTable::Open(). The Open() needs some updates for the ReadOptions variable and the updates are also needed for the called functions, including PrefetchTail(), PrepareIOOptions(), ReadFooterFromFile(), ReadMetaIndexblock(), ReadPropertiesBlock(), PrefetchIndexAndFilterBlocks(), and ReadRangeDelBlock(). - In RandomAccessFileReader, the functions to be updated include Read(), MultiRead(), ReadAsync(), and Prefetch(). - Update the downstream functions of NewIndexIterator(), NewDataBlockIterator(), and BlockBasedTableIterator(). ### Test Plans Add unit tests. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9996 Reviewed By: anand1976 Differential Revision: D36452483 Pulled By: gitbw95 fbshipit-source-id: 60978204a4f849bb9261cb78d9bc1cb56d6008cf |