Summary:
There are two places in the stress test code where we compute the CRC
for a range of KVs for the purposes of checking consistency, namely in the
CF consistency test (to make sure CFs contain the same data), and when
performing `CompactRange` (to make sure the pre- and post-compaction
states are equivalent). The patch extends the logic so that wide columns
are also considered in both cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10788
Test Plan: Tested using some simple blackbox crash test runs.
Reviewed By: riversand963
Differential Revision: D40191134
Pulled By: ltamasi
fbshipit-source-id: 542c21cac9077c6d225780deb210319bb5eee955
Summary:
The patch adds checks to the
`{NonBatchedOps,BatchedOps,CfConsistency}StressTest::TestPrefixScan` methods
to make sure the wide columns exposed by the iterators are as expected (based on
the value base encoded into the iterator value). It also makes some code hygiene
improvements in these methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10786
Test Plan:
Ran some simple blackbox tests in the various modes (non-batched, batched,
CF consistency).
Reviewed By: riversand963
Differential Revision: D40163623
Pulled By: riversand963
fbshipit-source-id: 72f4c3b51063e48c15f974c4ec64d751d3ed0a83
Summary:
The patch adds the `PutEntity` API to the non-batched, batched, and
CF consistency stress tests. Namely, when the new `db_stress` command
line parameter `use_put_entity_one_in` is greater than zero, one in
N writes on average is performed using `PutEntity` rather than `Put`.
The wide-column entity written has the generated value in its default
column; in addition, it contains up to three additional columns where
the original generated value is divided up between the column name and the
column value (with the column name containing the first k characters of
the generated value, and the column value containing the rest). Whether
`PutEntity` is used (and if so, how many columns the entity has) is completely
determined by the "value base" used to generate the value (that is, there is
no randomness involved). Assuming the same `use_put_entity_one_in` setting
is used across `db_stress` invocations, this enables us to reconstruct and
validate the entity during subsequent `db_stress` runs.
Note that `PutEntity` is currently incompatible with `Merge`, transactions, and
user-defined timestamps; these combinations are currently disabled/disallowed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10760
Test Plan: Ran some batched, non-batched, and CF consistency stress tests using the script.
Reviewed By: riversand963
Differential Revision: D39939032
Pulled By: ltamasi
fbshipit-source-id: eafdf124e95993fb7d73158e3b006d11819f7fa9
Summary:
One problem of the previous strategy was `NonBatchedOpsStressTest::TestIngestExternalFile()` could release the lock for `rand_keys[0]` in `rand_column_families[0]`, and then subsequent operations in the same loop iteration (e.g., `TestPut()`) would run without locking. This PR changes the strategy so each `Test*()` function is responsible for acquiring and releasing its own locks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10678
Reviewed By: hx235
Differential Revision: D39516401
Pulled By: ajkr
fbshipit-source-id: bf67f12ebbd293ba8c24fdf8754ff28737bcd758
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/9424 added rate-limiting support for user reads, which does not include batched `MultiGet()`s that call `RandomAccessFileReader::MultiRead()`. The reason is that it's harder (compared with RandomAccessFileReader::Read()) to implement the ideal rate-limiting where we first call `RateLimiter::RequestToken()` for allowed bytes to multi-read and then consume those bytes by satisfying as many requests in `MultiRead()` as possible. For example, it can be tricky to decide whether we want partially fulfilled requests within one `MultiRead()` or not.
However, due to a recent urgent user request, we decide to pursue an elementary (but a conditionally ineffective) solution where we accumulate enough rate limiter requests toward the total bytes needed by one `MultiRead()` before doing that `MultiRead()`. This is not ideal when the total bytes are huge as we will actually consume a huge bandwidth from rate-limiter causing a burst on disk. This is not what we ultimately want with rate limiter. Therefore a follow-up work is noted through TODO comments.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10159
Test Plan:
- Modified existing unit test `DBRateLimiterOnReadTest/DBRateLimiterOnReadTest.NewMultiGet`
- Traced the underlying system calls `io_uring_enter` and verified they are 10 seconds apart from each other correctly under the setting of `strace -ftt -e trace=io_uring_enter ./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb2 -readonly -num=50 -threads=1 -multiread_batched=1 -batch_size=100 -duration=10 -rate_limiter_bytes_per_sec=200 -rate_limiter_refill_period_us=1000000 -rate_limit_bg_reads=1 -disable_auto_compactions=1 -rate_limit_user_ops=1` where each `MultiRead()` read about 2000 bytes (inspected by debugger) and the rate limiter grants 200 bytes per seconds.
- Stress test:
- Verified `./db_stress (-test_cf_consistency=1/test_batches_snapshots=1) -use_multiget=1 -cache_size=1048576 -rate_limiter_bytes_per_sec=10241024 -rate_limit_bg_reads=1 -rate_limit_user_ops=1` work
Reviewed By: ajkr, anand1976
Differential Revision: D37135172
Pulled By: hx235
fbshipit-source-id: 73b8e8f14761e5d4b77235dfe5d41f4eea968bcd
Summary:
This PR updates secondary instance testing in stress test by default.
A background thread will be started (disabled by default), running a secondary instance tailing the logs of the primary.
Periodically (every 1 sec), this thread calls `TryCatchUpWithPrimary()` and uses point lookup or range scan
to read some random keys with only very basic verification to make sure no assertion failure is triggered.
Thanks to https://github.com/facebook/rocksdb/issues/10061 , we can enable secondary instance when user-defined timestamp is enabled.
Also removed a less useful test configuration, `secondary_catch_up_one_in`. This is very similar to the periodic
catch-up.
In the last commit, I decided not to enable it now, but just update the tests, since secondary instance does not
work well when the underlying file is renamed by primary, e.g. SstFileManager.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10121
Test Plan:
```
TEST_TMPDIR=/dev/shm/rocksdb make crash_test
TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_ts
TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_atomic_flush
```
Reviewed By: ajkr
Differential Revision: D36939458
Pulled By: riversand963
fbshipit-source-id: 1c065b7efc3690fc341569b9d369a5cbd8ef6b3e
Summary:
Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working.
`RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`.
There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads).
The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424
Test Plan:
- new unit tests
- new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart.
- setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true`
- benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true`
- crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10`
Reviewed By: hx235
Differential Revision: D33747386
Pulled By: ajkr
fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
Summary:
When `--sync_fault_injection` is set, this PR takes a snapshot of the expected values and starts an operation trace when the DB is opened. These files are stored in `--expected_values_dir`. They will be used for recovering the expected state of the DB following a crash where a suffix of unsynced operations are allowed to be lost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8960
Test Plan: injected crashed at various points in `FileExpectedStateManager` and verified the next run recovers the state/trace file with highest seqno and removes all older/temporary files. Note we don't use sync_fault_injection in CI crash tests yet.
Reviewed By: pdillinger
Differential Revision: D31194941
Pulled By: ajkr
fbshipit-source-id: b0f935a529a0186c5a9c7709fcaa8829de8a84cf
Summary:
We can only check key on restored backup if in a stress test
configuration locking the key. (Fixes mismatch seen in backup/restore
with atomic flush.)
TestCheckpoint used a very ugly solution to the same problem: copy-paste
dozens of lines of code with some changes and removals. I removed the
unnecessary implementation and made the existing one simply adaptive,
like TestBackupRestore.
Also made TestBackupRestore clean up dead backup/restore directories on
success.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7373
Test Plan:
blackbox_crash_test_with_atomic_flush for a while,
blackbox_crash_test for a while, with backup and checkpoint 1 in 5k and
only 1k max_keys to stress this area
Reviewed By: ajkr
Differential Revision: D23629057
Pulled By: pdillinger
fbshipit-source-id: d7fe7e2be75aaf3cf974be9540a7c5c5de8b371b
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
Delicious copy-pasta from https://github.com/facebook/rocksdb/issues/7039
Also fixing DestroyDir to allow files to go missing while it is operating. This seems to fix failures I got with test plan reproducer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7103
Test Plan:
make blackbox_crash_test_with_atomic_flush for a while with
checkpoint_one_in=100
Reviewed By: siying
Differential Revision: D22435315
Pulled By: pdillinger
fbshipit-source-id: 0ec0538402493887aeda43ecc03f32979cb84ced
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Stress tests count number of errors and report them at the end. Not all the cases are accompanied with a log line which makes debugging difficult. The patch adds a log line to the remaining cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6256
Differential Revision: D19268785
Pulled By: maysamyabandeh
fbshipit-source-id: bdabcaa5c5c7edcb4ce4f25e38fd8a3fd9c7700b
Summary:
This commit is suspected in some crash test failures such as
Verification failed for column family 0 key 78438077: Value not found: NotFound:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6243
Test Plan: 'make check' and start 'make crash_test'
Differential Revision: D19220495
Pulled By: pdillinger
fbshipit-source-id: 6c4709cee80ab4344e06ce360f51e947d79fb3fa
Summary:
Currently, db_stress generates fixed length keys of 8 bytes. This patch adds the ability to generate variable length keys. Most of the db_stress code continues to work with a numeric key randomly generated, and the numeric key also acts as an index into the values_ array. The numeric key is mapped to a variable length string key in a deterministic way. Furthermore, the ordering is preserved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6165
Test Plan: run make crash_test
Differential Revision: D19204646
Pulled By: anand1976
fbshipit-source-id: d2d46a96615b4832a8be2a981f5913905f0e1ca7
Summary:
Several improvements to crash_test/stress_test:
(1) Stress_test to support an parameter of bottommost compression
(2) Rename those FLAGS_* variables that are not gflags to avoid confusion
(3) Crash_test to randomly generate compression type for bottommost compression with half the chance.
(4) Stress_test to sanitize unsupported compression type to snappy, so that crash_test to cover all possible compression types and people don't need to worry about they don't support all comrpession types in their environment.
(5) In crash_test, when generating db_stress command, sort arguments in alphabeta order, so that it is easier to find value for a specific argument.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6215
Test Plan: Run "make crash_test" for a while and see the botommost option shown in LOG files.
Differential Revision: D19171255
fbshipit-source-id: d7001e246c4ff9ee5760776eea0be97738650735
Summary:
Currently, db_stress performs verification by calling `VerifyDb()` at the end of test and optionally before tests start. In case of corruption or incorrect result, it will be too late. This PR adds more verification in two ways.
1. For cf consistency test, each test thread takes a snapshot and verifies every N ops. N is configurable via `-verify_db_one_in`. This option is not supported in other stress tests.
2. For cf consistency test, we use another background thread in which a secondary instance periodically tails the primary (interval is configurable). We verify the secondary. Once an error is detected, we terminate the test and report. This does not affect other stress tests.
Test plan (devserver)
```
$./db_stress -test_cf_consistency -verify_db_one_in=0 -ops_per_thread=100000 -continuous_verification_interval=100
$./db_stress -test_cf_consistency -verify_db_one_in=1000 -ops_per_thread=10000 -continuous_verification_interval=0
$make crash_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6173
Differential Revision: D19047367
Pulled By: riversand963
fbshipit-source-id: aeed584ad71f9310c111445f34975e5ab47a0615
Summary:
compaction history is stored in manifest files. Preserve all of them in db_stress would help debugging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6142
Test Plan: Run db_stress and observe that manifest files are preserved. Run whole crash_test and see how DB directory looks like.
Differential Revision: D19047026
fbshipit-source-id: f83c3e0bb5332b1b4768be5dcee56a24f9b760a9
Summary:
Two changes:
1. Prevent static variables in a header file
2. Add "override" keyword when virtual functions are overridden.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6137
Test Plan: Build db_stress with or without LITE.
Differential Revision: D18892007
fbshipit-source-id: 295356427a34473b23ed36d6ed4ef3ae35a32db0
Summary:
db_stress_tool.cc now is a giant file. In order to main it easier to improve and maintain, break it down to multiple source files.
Most classes are turned into their own files. Separate .h and .cc files are created for gflag definiations. Another .h and .cc files are created for some common functions. Some test execution logic that is only loosely related to class StressTest is moved to db_stress_driver.h and db_stress_driver.cc. All the files are located under db_stress_tool/. The directory name is created as such because if we end it with either stress or test, .gitignore will ignore any file under it and makes it prone to issues in developements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6134
Test Plan: Build under GCC7 with and without LITE on using GNU Make. Build with GCC 4.8. Build with cmake with -DWITH_TOOL=1
Differential Revision: D18876064
fbshipit-source-id: b25d0a7451840f31ac0f5ebb0068785f783fdf7d
