Commit Graph

210 Commits

Author SHA1 Message Date
Peter Dillinger ac24f152a1 Refactor `table_factory` into MutableCFOptions (#13077)
Summary:
This is setting up for a fix to a data race in SetOptions on BlockBasedTableOptions (BBTO), https://github.com/facebook/rocksdb/issues/10079
The race will be fixed by replacing `table_factory` with a modified copy whenever we want to modify a BBTO field.

An argument could be made that this change creates more entaglement between features (e.g. BlobSource <-> MutableCFOptions), rather than (conceptually) minimizing the dependencies of each feature, but
* Most of these things already depended on ImmutableOptions
* Historically there has been a lot of plumbing (and possible small CPU overhead) involved in adding features that need to reach a lot of places, like `block_protection_bytes_per_key`. Keeping those wrapped up in options simplifies that.
* SuperVersion management generally takes care of lifetime management of MutableCFOptions, so is not that difficult. (Crash test agrees so far.)

There are some FIXME places where it is known to be unsafe to replace `block_cache` unless/until we handle shared_ptr tracking properly. HOWEVER, replacing `block_cache` is generally dubious, at least while existing users of the old block cache (e.g. table readers) can continue indefinitely.

The change to cf_options.cc is essentially just moving code (not changing).

I'm not concerned about the performance of copying another shared_ptr with MutableCFOptions, but I left a note about considering an improvement if more shared_ptr are added to it.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/13077

Test Plan:
existing tests, crash test.

Unit test DBOptionsTest.GetLatestCFOptions updated with some temporary logic. MemoryTest required some refactoring (simplification) for the change.

Reviewed By: cbi42

Differential Revision: D64546903

Pulled By: pdillinger

fbshipit-source-id: 69ae97ce5cf4c01b58edc4c5d4687eb1e5bf5855
2024-10-17 14:13:20 -07:00
Yu Zhang 8592517c89 Remove stale entries from L0 files when UDT is not persisted (#13035)
Summary:
When user-defined timestamps are not persisted, currently we replace the actual timestamp with min timestamp after an entry is output from compaction iterator. Compaction iterator won't be able to help with removing stale entries this way. This PR adds a wrapper iterator `TimestampStrippingIterator` for `MemTableIterator` that does the min timestamp replacement at the memtable iteration step. It is used by flush and can help remove stale entries from landing in L0 files.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/13035

Test Plan: Added unit test

Reviewed By: pdillinger, cbi42

Differential Revision: D63423682

Pulled By: jowlyzhang

fbshipit-source-id: 087dcc9cee97b9ea51b8d2b88dc91c2984d54e55
2024-10-14 12:28:35 -07:00
Yu Zhang c73cf7a878 Add CompactForTieringCollector to support automatically trigger compaction for tiering use case (#12760)
Summary:
This PR adds user property collector factory `CompactForTieringCollectorFactory` to support observe SST file and mark it as need compaction for fast tracking data to the proper tier.

A triggering ratio `compaction_trigger_ratio_` can be configured to achieve the following:
1) Setting the ratio to be equal to or smaller than 0 disables this collector
2) Setting the ratio to be within (0, 1] will write the number of observed eligible entries into a user property and marks a file as need-compaction when aforementioned condition is met.
3) Setting the ratio to be higher than 1 can be used to just writes the user table property, and not mark any file as need compaction.
 For a column family that does not enable tiering feature, even if an effective configuration is provided, this collector is still disabled. For a file that is already on the last level, this collector is also disabled.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/12760

Test Plan: Added unit tests

Reviewed By: pdillinger

Differential Revision: D58734976

Pulled By: jowlyzhang

fbshipit-source-id: 6daab2c4f62b5c6689c3c03e3b3907bbbe6b7a81
2024-06-18 10:51:29 -07:00
Yu Zhang 2c02a9b76f Preserve TimedPut on penultimate level until it actually expires (#12543)
Summary:
To make sure `TimedPut` are placed on proper tier before and when it becomes eligible for cold tier
1) flush and compaction need to keep relevant seqno to time mapping for not just the sequence number contained in internal keys, but also preferred sequence number for `TimedPut` entries.

This PR also fix some bugs in for handling `TimedPut` during compaction:
1) dealing with an edge case when a `TimedPut` entry's internal key is the right bound for penultimate level, the internal key after swapping in its preferred sequence number will fall outside of the penultimate range because preferred sequence number is smaller than its original sequence number. The entry however is still safe to be placed on penultimate level, so we keep track of `TimedPut` entry's original sequence number for this check. The idea behind this is that as long as it's safe for the original key to be placed on penultimate level, it's safe for the entry with swapped preferred sequence number to be placed on penultimate level too. Because we only swap in preferred sequence number when that entry is visible to the earliest snapshot and there is no other data points with the same user key in lower levels. On the other hand, as long as it's not safe for the original key to be placed on penultimate level, we will not place the entry after swapping the preferred seqno on penultimate level either.

2) the assertion that preferred seqno is always bigger than original sequence number may fail if this logic is only exercised after sequence number is zeroed out. We adjust the assertion to handle that case too. In this case, we don't swap in the preferred seqno but will adjust the its type to `kTypeValue`.

3) there was a special case handling for when range deletion may end up incorrectly covering an entry if preferred seqno is swapped in. But it missed the case that if the original entry is already covered by range deletion. The original handling will mistakenly output the entry instead of omitting it.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/12543

Test Plan:
./tiered_compaction_test --gtest_filter="PrecludeLastLevelTest.PreserveTimedPutOnPenultimateLevel"
./compaction_iterator_test --gtest_filter="*TimedPut*"

Reviewed By: pdillinger

Differential Revision: D56195096

Pulled By: jowlyzhang

fbshipit-source-id: 37ebb09d2513abbd9e90cda0217e26874584b8f3
2024-04-30 11:16:02 -07:00
Yu Zhang 13e1c32a18 Follow ups for TimedPut and write time property (#12455)
Summary:
This PR contains a few follow ups from https://github.com/facebook/rocksdb/issues/12419 and https://github.com/facebook/rocksdb/issues/12428 including:

1) Handle a special case for `WriteBatch::TimedPut`. When the user specified write time is `std::numeric_limits<uint64_t>::max()`, it's not treated as an error, but it instead creates and writes a regular `Put` entry.

2) Update the `InternalIterator::write_unix_time` APIs to handle `kTypeValuePreferredSeqno` entries.

3) FlushJob is updated to use the seqno to time mapping copy in `SuperVersion`. FlushJob currently copy the DB's seqno to time mapping while holding db mutex and only copies the part of interest, a.k.a, the part that only goes back to the earliest sequence number of the to-be-flushed memtables. While updating FlushJob to use the mapping copy in `SuperVersion`, it's given access to the full mapping to help cover the need to convert `kTypeValuePreferredSeqno`'s write time to preferred seqno as much as possible.

Test plans:
Added unit tests

Pull Request resolved: https://github.com/facebook/rocksdb/pull/12455

Reviewed By: pdillinger

Differential Revision: D55165422

Pulled By: jowlyzhang

fbshipit-source-id: dc022653077f678c24661de5743146a74cce4b47
2024-03-21 10:00:15 -07:00
Yu Zhang 1104eaa35e Add initial support for TimedPut API (#12419)
Summary:
This PR adds support for `TimedPut` API. We introduced a new type `kTypeValuePreferredSeqno` for entries added to the DB via the `TimedPut` API.

The life cycle of such an entry on the write/flush/compaction paths are:

1) It is initially added to memtable as:
`<user_key, seq, kTypeValuePreferredSeqno>: {value, write_unix_time}`

2) When it's flushed to L0 sst files, it's converted to:
`<user_key, seq, kTypeValuePreferredSeqno>: {value, preferred_seqno}`
 when we have easy access to the seqno to time mapping.

3) During compaction, if certain conditions are met, we swap in the `preferred_seqno` and the entry will become:
`<user_key, preferred_seqno, kTypeValue>: value`. This step helps fast track these entries to the cold tier if they are eligible after the sequence number swap.

On the read path:
A `kTypeValuePreferredSeqno` entry acts the same as a `kTypeValue` entry, the unix_write_time/preferred seqno part packed in value is completely ignored.

Needed follow ups:
1) The seqno to time mapping accessible in flush needs to be extended to cover the `write_unix_time` for possible `kTypeValuePreferredSeqno` entries. This also means we need to track these `write_unix_time` in memtable.

2) Compaction filter support for the new `kTypeValuePreferredSeqno` type for feature parity with other `kTypeValue` and equivalent types.

3) Stress test coverage for the feature

Pull Request resolved: https://github.com/facebook/rocksdb/pull/12419

Test Plan: Added unit tests

Reviewed By: pdillinger

Differential Revision: D54920296

Pulled By: jowlyzhang

fbshipit-source-id: c8b43f7a7c465e569141770e93c748371ff1da9e
2024-03-14 15:44:55 -07:00
Andrew Kryczka f9d45358ca Removed `check_flush_compaction_key_order` (#12311)
Summary:
`check_flush_compaction_key_order` option was introduced for the key order checking online validation. It gave users the ability to disable the validation without downgrade in case the validation caused inefficiencies or false positives. Over time this validation has shown to be cheap and correct, so the option to disable it can now be removed.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/12311

Reviewed By: cbi42

Differential Revision: D53233379

Pulled By: ajkr

fbshipit-source-id: 1384361104021d6e3e580dce2ec123f9f99ce637
2024-01-31 16:30:26 -08:00
Yu Zhang 071a146fa0 Add support for range deletion when user timestamps are not persisted (#12254)
Summary:
For the user defined timestamps in memtable only feature, some special handling for range deletion blocks are needed since both the key (start_key) and the value (end_key) of a range tombstone can contain user-defined timestamps. Handling for the key is taken care of in the same way as the other data blocks in the block based table. This PR adds the special handling needed for the value (end_key) part. This includes:

1) On the write path, when L0 SST files are first created from flush, user-defined timestamps are removed from an end key of a range tombstone. There are places where it's logically removed (replaced with a min timestamp) because there is still logic with the running comparator that expects a user key that contains timestamp. And in the block based builder, it is eventually physically removed before persisted in a block.

2) On the read path, when range deletion block is being read, we artificially pad a min timestamp to the end key of a range tombstone in `BlockBasedTableReader`.

3) For file boundary `FileMetaData.largest`, we artificially pad a max timestamp to it if it contains a range deletion sentinel. Anytime when range deletion end_key is used to update file boundaries, it's using max timestamp instead of the range tombstone's actual timestamp to mark it as an exclusive end. d69628e6ce/db/dbformat.h (L923-L935)
This max timestamp is removed when in memory `FileMetaData.largest` is persisted into Manifest, we pad it back when it's read from Manifest while handling related `VersionEdit` in `VersionEditHandler`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/12254

Test Plan: Added unit test and enabled this feature combination's stress test.

Reviewed By: cbi42

Differential Revision: D52965527

Pulled By: jowlyzhang

fbshipit-source-id: e8315f8a2c5268e2ae0f7aec8012c266b86df985
2024-01-29 11:37:34 -08:00
Peter Dillinger cb08a682d4 Fix/cleanup SeqnoToTimeMapping (#12253)
Summary:
The SeqnoToTimeMapping class (RocksDB internal) used by the preserve_internal_time_seconds / preclude_last_level_data_seconds options was essentially in a prototype state with some significant flaws that would risk biting us some day. This is a big, complicated change because both the implementation and the behavioral requirements of the class needed to be upgraded together. In short, this makes SeqnoToTimeMapping more internally responsible for maintaining good invariants, so that callers don't easily encounter dangerous scenarios.

* Some API functions were confusingly named and structured, so I fully refactored the APIs to use clear naming (e.g. `DecodeFrom` and `CopyFromSeqnoRange`), object states, function preconditions, etc.
  * Previously the object could informally be sorted / compacted or not, and there was limited checking or enforcement on these states. Now there's a well-defined "enforced" state that is consistently checked in debug mode for applicable operations. (I attempted to create a separate "builder" class for unenforced states, but IIRC found that more cumbersome for existing uses than it was worth.)
* Previously operations would coalesce data in a way that was better for `GetProximalTimeBeforeSeqno` than for `GetProximalSeqnoBeforeTime` which is odd because the latter is the only one used by DB code currently (what is the seqno cut-off for data definitely older than this given time?). This is now reversed to consistently favor `GetProximalSeqnoBeforeTime`, with that logic concentrated in one place: `SeqnoToTimeMapping::SeqnoTimePair::Merge()`. Unfortunately, a lot of unit test logic was specifically testing the old, suboptimal behavior.
* Previously, the natural behavior of SeqnoToTimeMapping was to THROW AWAY data needed to get reasonable answers to the important `GetProximalSeqnoBeforeTime` queries. This is because SeqnoToTimeMapping only had a FIFO policy for staying within the entry capacity (except in aggregate+sort+serialize mode). If the DB wasn't extremely careful to avoid gathering too many time mappings, it could lose track of where the seqno cutoff was for cold data (`GetProximalSeqnoBeforeTime()` returning 0) and preventing all further data migration to the cold tier--until time passes etc. for mappings to catch up with FIFO purging of them. (The problem is not so acute because SST files contain relevant snapshots of the mappings, but the problem would apply to long-lived memtables.)
  * Now the SeqnoToTimeMapping class has fully-integrated smarts for keeping a sufficiently complete history, within capacity limits, to give good answers to `GetProximalSeqnoBeforeTime` queries.
  * Fixes old `// FIXME: be smarter about how we erase to avoid data falling off the front prematurely.`
* Fix an apparent bug in how entries are selected for storing into SST files. Previously, it only selected entries within the seqno range of the file, but that would easily leave a gap at the beginning of the timeline for data in the file for the purposes of answering GetProximalXXX queries with reasonable accuracy. This could probably lead to the same problem discussed above in naively throwing away entries in FIFO order in the old SeqnoToTimeMapping. The updated testing of GetProximalSeqnoBeforeTime in BasicSeqnoToTimeMapping relies on the fixed behavior.
* Fix a potential compaction CPU efficiency/scaling issue in which each compaction output file would iterate over and sort all seqno-to-time mappings from all compaction input files. Now we distill the input file entries to a constant size before processing each compaction output file.

Intended follow-up (me or others):
* Expand some direct testing of SeqnoToTimeMapping APIs. Here I've focused on updating existing tests to make sense.
* There are likely more gaps in availability of needed SeqnoToTimeMapping data when the DB shuts down and is restarted, at least with WAL.
* The data tracked in the DB could be kept more accurate and limited if it used the oldest seqno of unflushed data. This might require some more API refactoring.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/12253

Test Plan: unit tests updated

Reviewed By: jowlyzhang

Differential Revision: D52913733

Pulled By: pdillinger

fbshipit-source-id: 020737fcbbe6212f6701191a6ab86565054c9593
2024-01-19 21:50:38 -08:00
Hui Xiao 06e593376c Group SST write in flush, compaction and db open with new stats (#11910)
Summary:
## Context/Summary
Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity.

For that, this PR does the following:
- Tag different write IOs by passing down and converting WriteOptions to IOOptions
- Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS

Some related code refactory to make implementation cleaner:
- Blob stats
   - Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS  include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info.
   - Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write.
- Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority
- Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification
- Build table
   - TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables
   - Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder.
This parameter is used for dynamically changing file io priority for flush, see  https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more
   - Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority

## Test
### db bench

Flush
```
./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100

rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
```

compaction, db oopen
```
Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench

Run:./db_bench --statistics=1 --benchmarks=compact  --db=../db_bench --use_existing_db=1

rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279
rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213
rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66
```

blob stats - just to make sure they aren't broken by this PR
```
Integrated Blob DB

Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench

Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact  --db=../db_bench --use_existing_db=1

pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600
rocksdb.blobdb.blob.file.synced COUNT : 1
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842

post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164

rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same)
```

```
Stacked Blob DB

Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench

pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876
rocksdb.blobdb.blob.file.synced COUNT : 8
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445

post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164

rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same)
```

###  Rehearsal CI stress test
Trigger 3 full runs of all our CI stress tests

###  Performance

Flush
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark; enable_statistics = true

Pre-pr: avg 507515519.3 ns
497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908,

Post-pr: avg 511971266.5 ns, regressed 0.88%
502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408,
```

Compaction
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1  --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark

Pre-pr: avg 495346098.30 ns
492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846

Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97%
502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007
```

Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats)
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1  --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark

Pre-pr: avg 3848.10 ns
3814,3838,3839,3848,3854,3854,3854,3860,3860,3860

Post-pr: avg 3874.20 ns, regressed 0.68%
3863,3867,3871,3874,3875,3877,3877,3877,3880,3881
```

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910

Reviewed By: ajkr

Differential Revision: D49788060

Pulled By: hx235

fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff
2023-12-29 15:29:23 -08:00
Peter Dillinger 02443dd93f Refactor, clean up, fixes, and more testing for SeqnoToTimeMapping (#11905)
Summary:
This change is before a planned DBImpl change to ensure all sufficiently recent sequence numbers since Open are covered by SeqnoToTimeMapping (bug fix with existing test work-arounds). **Intended follow-up**

However, I found enough issues with SeqnoToTimeMapping to warrant this PR first, including very small fixes in DB implementation related to API contract of SeqnoToTimeMapping.

Functional fixes / changes:
* This fixes some mishandling of boundary cases. For example, if the user decides to stop writing to DB, the last written sequence number would perpetually have its write time updated to "now" and would always be ineligible for migration to cold tier. Part of the problem is that the SeqnoToTimeMapping would return a seqno known to have been written before (immediately or otherwise) the requested time, but compaction_job.cc would include that seqno in the preserve/exclude set. That is fixed (in part) by adding one in compaction_job.cc
* That problem was worse because a whole range of seqnos could be updated perpetually with new times in SeqnoToTimeMapping::Append (if no writes to DB). That logic was apparently optimized for GetOldestApproximateTime (now GetProximalTimeBeforeSeqno), which is not used in production, to the detriment of GetOldestSequenceNum (now GetProximalSeqnoBeforeTime), which is used in production. (Perhaps plans changed during development?) This is fixed in Append to optimize for accuracy of GetProximalSeqnoBeforeTime. (Unit tests added and updated.)
* Related: SeqnoToTimeMapping did not have a clear contract about the relationships between seqnos and times, just the idea of a rough correspondence. Now the class description makes it clear that the write time of each recorded seqno comes before or at the associated time, to support getting best results for GetProximalSeqnoBeforeTime. And this makes it easier to make clear the contract of each API function.
  * Update `DBImpl::RecordSeqnoToTimeMapping()` to follow this ordering in gathering samples.

Some part of these changes has required an expanded test work-around for the problem (see intended follow-up above) that the DB does not immediately ensure recent seqnos are covered by its mapping. These work-arounds will be removed with that planned work.

An apparent compaction bug is revealed in
PrecludeLastLevelTest::RangeDelsCauseFileEndpointsToOverlap, so that test is disabled. Filed GitHub issue #11909

Cosmetic / code safety things (not exhaustive):
* Fix some confusing names.
  * `seqno_time_mapping` was used inconsistently in places. Now just `seqno_to_time_mapping` to correspond to class name.
  * Rename confusing `GetOldestSequenceNum` -> `GetProximalSeqnoBeforeTime` and `GetOldestApproximateTime` -> `GetProximalTimeBeforeSeqno`. Part of the motivation is that our times and seqnos here have the same underlying type, so we want to be clear about which is expected where to avoid mixing.
  * Rename `kUnknownSeqnoTime` to `kUnknownTimeBeforeAll` because the value is a bad choice for unknown if we ever add ProximalAfterBlah functions.
  * Arithmetic on SeqnoTimePair doesn't make sense except for delta encoding, so use better names / APIs with that in mind.
  * (OMG) Don't allow direct comparison between SeqnoTimePair and SequenceNumber. (There is no checking that it isn't compared against time by accident.)
  * A field name essentially matching the containing class name is a confusing pattern (`seqno_time_mapping_`).
  * Wrap calls to confusing (but useful) upper_bound and lower_bound functions to have clearer names and more code reuse.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11905

Test Plan: GetOldestSequenceNum (now GetProximalSeqnoBeforeTime) and TruncateOldEntries were lacking unit tests, despite both being used in production (experimental feature). Added those and expanded others.

Reviewed By: jowlyzhang

Differential Revision: D49755592

Pulled By: pdillinger

fbshipit-source-id: f72a3baac74d24b963c77e538bba89a7fc8dce51
2023-09-29 11:21:59 -07:00
Changyu Bi 6a0f637633 Compare the number of input keys and processed keys for compactions (#11571)
Summary:
... to improve data integrity validation during compaction.

A new option `compaction_verify_record_count` is introduced for this verification and is enabled by default. One exception when the verification is not done is when a compaction filter returns kRemoveAndSkipUntil which can cause CompactionIterator to seek until some key and hence not able to keep track of the number of keys processed.

For expected number of input keys, we sum over the number of total keys - number of range tombstones across compaction input files (`CompactionJob::UpdateCompactionStats()`). Table properties are consulted if `FileMetaData` is not initialized for some input file. Since table properties for all input files were also constructed during `DBImpl::NotifyOnCompactionBegin()`, `Compaction::GetTableProperties()` is introduced to reduce duplicated code.

For actual number of keys processed, each subcompaction will record its number of keys processed to `sub_compact->compaction_job_stats.num_input_records` and aggregated when all subcompactions finish (`CompactionJob::AggregateCompactionStats()`). In the case when some subcompaction encountered kRemoveAndSkipUntil from compaction filter and does not have accurate count, it propagates this information through `sub_compact->compaction_job_stats.has_num_input_records`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11571

Test Plan:
* Add a new unit test `DBCompactionTest.VerifyRecordCount` for the corruption case.
* All other unit tests for non-corrupted case.
* Ran crash test for a few hours: `python3 ./tools/db_crashtest.py whitebox --simple`

Reviewed By: ajkr

Differential Revision: D47131965

Pulled By: cbi42

fbshipit-source-id: cc8e94565dd526c4347e9d3843ecf32f6727af92
2023-07-28 09:47:31 -07:00
Yu Zhang 15053f3ab4 Logically strip timestamp during flush (#11557)
Summary:
Logically strip the user-defined timestamp when L0 files are created during flush when `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` is false. Logically stripping timestamp here means replacing the original user-defined timestamp with a mininum timestamp, which for now is hard coded to be all zeros bytes.

While working on this, I caught a missing piece on the `BlockBuilder` level for this feature. The current quick path `std::min(buffer_size, last_key_size)` needs a bit tweaking to work for this feature. When user-defined timestamp is stripped during block building, on writing first entry or right after resetting, `buffer` is empty and `buffer_size` is zero as usual. However, in follow-up writes, depending on the size of the stripped user-defined timestamp, and the size of the value, what's in `buffer` can sometimes be smaller than `last_key_size`, leading `std::min(buffer_size, last_key_size)` to truncate the `last_key`. Previous test doesn't caught the bug because in those tests, the size of the stripped user-defined timestamps bytes is smaller than the length of the value. In order to avoid the conditional operation, this PR changed the original trivial `std::min` operation into an arithmetic operation. Since this is a change in a hot and performance critical path, I did the following benchmark to check no observable regression is introduced.
```TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=50000000```
Compiled with DEBUG_LEVEL=0
Test vs. control runs simulaneous for better accuracy, units = ops/sec
                       PR  vs base:
Round 1: 350652 vs 349055
Round 2: 365733 vs 364308
Round 3: 355681 vs 354475

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11557

Test Plan:
New timestamp specific test added or existing tests augmented, both are parameterized with `UserDefinedTimestampTestMode`:
`UserDefinedTimestampTestMode::kNormal` -> UDT feature enabled, write / read with min timestamp
`UserDefinedTimestampTestMode::kStripUserDefinedTimestamps` -> UDT feature enabled, write / read with min timestamp, set Options.persist_user_defined_timestamps to false.

```
make all check
./db_wal_test --gtest_filter="*WithTimestamp*"
./flush_job_test --gtest_filter="*WithTimestamp*"
./repair_test --gtest_filter="*WithTimestamp*"
./block_based_table_reader_test
```

Reviewed By: pdillinger

Differential Revision: D47027664

Pulled By: jowlyzhang

fbshipit-source-id: e729193b6334dfc63aaa736d684d907a022571f5
2023-06-29 15:50:50 -07:00
Yu Zhang 7521478b43 Record the `persist_user_defined_timestamps` flag in manifest (#11515)
Summary:
Start to record the value of the flag `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` in the Manifest and table properties for a SST file when it is created. And use the recorded flag when creating a table reader for the SST file. This flag's default value is true, it is only explicitly recorded if it's false.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11515

Test Plan:
```
make all check
./version_edit_test
```

Reviewed By: ltamasi

Differential Revision: D46920386

Pulled By: jowlyzhang

fbshipit-source-id: 075c20363d3d2cc1368422ecc805617ed135cc26
2023-06-21 21:49:01 -07:00
Hui Xiao 8f763bdeab Record and use the tail size to prefetch table tail (#11406)
Summary:
**Context:**
We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g,  small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug.  Therefore we decide to record the exact tail size and use it directly  to prefetch tail of the SST instead of relying heuristics.

**Summary:**
- Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()`
   - For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more.
- Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406

Test Plan:
1. New UT
2. db bench
Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison.
```
 diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc
index bd5669f0f..791484c1f 100644
 --- a/table/block_based/block_based_table_reader.cc
+++ b/table/block_based/block_based_table_reader.cc
@@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail(
                            &tail_prefetch_size);

   // Try file system prefetch
-  if (!file->use_direct_io() && !force_direct_prefetch) {
+  if (false && !file->use_direct_io() && !force_direct_prefetch) {
     if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority)
              .IsNotSupported()) {
       prefetch_buffer->reset(new FilePrefetchBuffer(
 diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc
index ea40f5fa0..39a0ac385 100644
 --- a/tools/db_bench_tool.cc
+++ b/tools/db_bench_tool.cc
@@ -4191,6 +4191,8 @@ class Benchmark {
           std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options));
     } else {
       BlockBasedTableOptions block_based_options;
+      block_based_options.metadata_cache_options.partition_pinning =
+      PinningTier::kAll;
       block_based_options.checksum =
           static_cast<ChecksumType>(FLAGS_checksum_type);
       if (FLAGS_use_hash_search) {
```
Create DB
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
ReadRandom
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
(a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 3395
rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614
```

(b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 14257
rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540
```

As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR

3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR.

Reviewed By: pdillinger

Differential Revision: D45413346

Pulled By: hx235

fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064
2023-05-08 13:14:28 -07:00
Changyu Bi 62fc15f009 Block per key-value checksum (#11287)
Summary:
add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are
1. checksum construction and verification in block.cc/h
2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h)
3. unit tests/crash test updates

Tests:
* Added unit tests
* Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576`

Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled.

Performance:
Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory.
For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates):

```
SETUP
make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench
./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none

BENCHMARK
./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE

The readrandom ops/sec looks like the following:
Block cache size:  2GB        1.2GB * 0.9    1.2GB * 0.8     1.2GB * 0.5   8MB
Main              240805     223604         198176           161653       139040
PR prot_bytes=0   238691     226693         200127           161082       141153
PR prot_bytes=1   214983     193199         178532           137013       108211
prot_bytes=1 vs    -10%        -15%          -10.8%          -15%        -23%
prot_bytes=0
```

The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287

Reviewed By: ajkr

Differential Revision: D43970708

Pulled By: cbi42

fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940
2023-04-25 12:08:23 -07:00
Hui Xiao 151242ce46 Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288)
Summary:
**Context:**
The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them.

**Summary**
- Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros`
   - Fixed the default histogram in `RandomAccessFileReader`
- New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader`
- Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288

Test Plan:
- **Stress test**
- **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.**  (without blob)
     - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads.
```
./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10)
```
```
// BlockBasedTable
rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805
rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116
rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689

// PlainTable
Does not apply
```
- **Db bench 2: performance**

**Read**

SETUP: db with 900 files
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655  -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none
```run till convergence
```
./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3
```
Pre-change
`readrandom [AVG 60 runs] : 21568 (± 248) ops/sec`
Post-change (no regression, -0.3%)
`readrandom [AVG 60 runs] : 21486 (± 236) ops/sec`

**Compaction/Flush**run till convergence
```
./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655  -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none

rocksdb.sst.read.micros  COUNT : 33820
rocksdb.sst.read.flush.micros COUNT : 1800
rocksdb.sst.read.compaction.micros COUNT : 32020
```
Pre-change
`fillseq [AVG 46 runs] : 1391 (± 214) ops/sec;    0.7 (± 0.1) MB/sec`

Post-change (no regression, ~-0.4%)
`fillseq [AVG 46 runs] : 1385 (± 216) ops/sec;    0.7 (± 0.1) MB/sec`

Reviewed By: ajkr

Differential Revision: D44007011

Pulled By: hx235

fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2023-04-21 09:07:18 -07:00
sdong 4720ba4391 Remove RocksDB LITE (#11147)
Summary:
We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support.

Most of changes were done through following comments:

unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'`

by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147

Test Plan: See CI

Reviewed By: pdillinger

Differential Revision: D42796341

fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
2023-01-27 13:14:19 -08:00
Changyu Bi e9d6a0d7ce Fix asan failure caused by range tombstone start key use-after-free (#11106)
Summary:
the `last_tombstone_start_user_key` variable in `BuildTable()` and in `CompactionOutputs::AddRangeDels()` may point to a start key that is freed if user-defined timestamp is enabled. This was causing ASAN failure and this PR fixes this issue.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11106

Test Plan: Added UT for repro.

Reviewed By: ajkr

Differential Revision: D42590862

Pulled By: cbi42

fbshipit-source-id: c493265ececdf89636d801d55ae929806c4d4b2c
2023-01-18 16:38:07 -08:00
Changyu Bi 6a82b68788 Avoid counting extra range tombstone compensated size in `AddRangeDels()` (#11091)
Summary:
in `CompactionOutputs::AddRangeDels()`, range tombstones with the same start and end key but different sequence numbers all contribute to compensated range tombstone size. This PR removes this redundancy. This PR also includes a fix from https://github.com/facebook/rocksdb/issues/11067 where a range tombstone that is not within a file's range was being added to the file. This fixes an assertion failure for `icmp.Compare(start, end) <= 0` in VersionSet::ApproximateSize() when calculating compensated range tombstone size. Assertions and a comment/essay was added to reason that no such range tombstone will be added after this fix.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11091

Test Plan:
- Added unit tests
- Stress test with small key range: `python3 tools/db_crashtest.py blackbox --simple --max_key=100 --interval=600 --write_buffer_size=262144 --target_file_size_base=256 --max_bytes_for_level_base=262144 --block_size=128 --value_size_mult=33 --subcompactions=10`

Reviewed By: ajkr

Differential Revision: D42521588

Pulled By: cbi42

fbshipit-source-id: 5bda3fe38997995314e1f7592319af12b69bc4f8
2023-01-17 12:47:44 -08:00
Changyu Bi cc6f323705 Include estimated bytes deleted by range tombstones in compensated file size (#10734)
Summary:
compensate file sizes in compaction picking so files with range tombstones are preferred, such that they get compacted down earlier as they tend to delete a lot of data. This PR adds a `compensated_range_deletion_size` field in FileMeta that is computed during Flush/Compaction and persisted in MANIFEST. This value is added to `compensated_file_size` which will be used for compaction picking. Currently, for a file in level L, `compensated_range_deletion_size` is set to the estimated bytes deleted by range tombstone of this file in all levels > L. This helps to reduce space amp when data in older levels are covered by range tombstones in level L.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10734

Test Plan:
- Added unit tests.
- benchmark to check if the above definition `compensated_range_deletion_size` is reducing space amp as intended, without affecting write amp too much. The experiment set up favorable for this optimization: large range tombstone issued infrequently. Command used:
```
./db_bench -benchmarks=fillrandom,waitforcompaction,stats,levelstats -use_existing_db=false -avoid_flush_during_recovery=true -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -max_bytes_for_level_base=134217728 -target_file_size_base=33554432 -writes_per_range_tombstone=500000 -range_tombstone_width=5000000 -num=50000000 -benchmark_write_rate_limit=8388608 -threads=16 -duration=1800 --max_num_range_tombstones=1000000000
```

In this experiment, each thread wrote 16 range tombstones over the duration of 30 minutes, each range tombstone has width 5M that is the 10% of the key space width. Results shows this PR generates a smaller DB size.

Compaction stats from this PR:
```
Level    Files   Size     Score Read(GB)  Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  L0      2/0   31.54 MB   0.5      0.0     0.0      0.0       8.4      8.4       0.0   1.0      0.0     63.4    135.56            110.94       544    0.249       0      0       0.0       0.0
  L4      3/0   96.55 MB   0.8     18.5     6.7     11.8      18.4      6.6       0.0   2.7     65.3     64.9    290.08            284.03       108    2.686    284M  1957K       0.0       0.0
  L5     15/0   404.41 MB   1.0     19.1     7.7     11.4      18.8      7.4       0.3   2.5     66.6     65.7    292.93            285.34       220    1.332    293M  3808K       0.0       0.0
  L6    143/0    4.12 GB   0.0     45.0     7.5     37.5      41.6      4.1       0.0   5.5     71.2     65.9    647.00            632.66       251    2.578    739M    47M       0.0       0.0
 Sum    163/0    4.64 GB   0.0     82.6    21.9     60.7      87.2     26.5       0.3  10.4     61.9     65.4   1365.58           1312.97      1123    1.216   1318M    52M       0.0       0.0
```

Compaction stats from main:
```
Level    Files   Size     Score Read(GB)  Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  L0      0/0    0.00 KB   0.0      0.0     0.0      0.0       8.4      8.4       0.0   1.0      0.0     60.5    142.12            115.89       569    0.250       0      0       0.0       0.0
  L4      3/0   85.68 MB   1.0     17.7     6.8     10.9      17.6      6.7       0.0   2.6     62.7     62.3    289.05            281.79       112    2.581    272M  2309K       0.0       0.0
  L5     11/0   293.73 MB   1.0     18.8     7.5     11.2      18.5      7.2       0.5   2.5     64.9     63.9    296.07            288.50       220    1.346    288M  4365K       0.0       0.0
  L6    130/0    3.94 GB   0.0     51.5     7.6     43.9      47.9      3.9       0.0   6.3     67.2     62.4    784.95            765.92       258    3.042    848M    51M       0.0       0.0
 Sum    144/0    4.31 GB   0.0     88.0    21.9     66.0      92.3     26.3       0.5  11.0     59.6     62.5   1512.19           1452.09      1159    1.305   1409M    58M       0.0       0.0```

Reviewed By: ajkr

Differential Revision: D39834713

Pulled By: cbi42

fbshipit-source-id: fe9341040b8704a8fbb10cad5cf5c43e962c7e6b
2022-12-29 13:28:24 -08:00
Andrew Kryczka 5cf6ab6f31 Ran clang-format on db/ directory (#10910)
Summary:
Ran `find ./db/ -type f | xargs clang-format -i`. Excluded minor changes it tried to make on db/db_impl/. Everything else it changed was directly under db/ directory. Included minor manual touchups mentioned in PR commit history.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10910

Reviewed By: riversand963

Differential Revision: D40880683

Pulled By: ajkr

fbshipit-source-id: cfe26cda05b3fb9a72e3cb82c286e21d8c5c4174
2022-11-02 14:34:24 -07:00
Changyu Bi 9f2363f4c4 User-defined timestamp support for `DeleteRange()` (#10661)
Summary:
Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are
- internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps.
- Garbage collection of range tombstones and range tombstone covered keys during compaction.
- Get()/MultiGet() to return the timestamp of a range tombstone when needed.
- Get/Iterator with range tombstones bounded by readoptions.timestamp.
- timestamp crash test now issues DeleteRange by default.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661

Test Plan:
- Added unit test: `make check`
- Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`
- Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`.  Did not see consistent regression in no timestamp case.

| micros/op | fillrandom | seekrandom |
| --- | --- | --- |
|main| 2.58 |10.96|
|PR 10661| 2.68 |10.63|

Reviewed By: riversand963

Differential Revision: D39441192

Pulled By: cbi42

fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2
2022-09-30 16:13:03 -07:00
Gang Liao ec4ebeff30 Support prepopulating/warming the blob cache (#10298)
Summary:
Many workloads have temporal locality, where recently written items are read back in a short period of time. When using remote file systems, this is inefficient since it involves network traffic and higher latencies. Because of this, we would like to support prepopulating the blob cache during flush.

This task is a part of https://github.com/facebook/rocksdb/issues/10156

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10298

Reviewed By: ltamasi

Differential Revision: D37908743

Pulled By: gangliao

fbshipit-source-id: 9feaed234bc719d38f0c02975c1ad19fa4bb37d1
2022-07-17 07:13:59 -07:00
Jay Zhuang a3acf2ef87 Add seqno to time mapping (#10338)
Summary:
Which will be used for tiered storage to preclude hot data from
compacting to the cold tier (the last level).
Internally, adding seqno to time mapping. A periodic_task is scheduled
to record the current_seqno -> current_time in certain cadence. When
memtable flush, the mapping informaiton is stored in sstable property.
During compaction, the mapping information are merged and get the
approximate time of sequence number, which is used to determine if a key
is recently inserted or not and preclude it from the last level if it's
recently inserted (within the `preclude_last_level_data_seconds`).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338

Test Plan: CI

Reviewed By: siying

Differential Revision: D37810187

Pulled By: jay-zhuang

fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f
2022-07-14 21:49:34 -07:00
zczhu 3ee6c9baec Consolidate manual_compaction_paused_ check (#10070)
Summary:
As pointed out by [https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422](https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422), check `manual_compaction_paused` and `manual_compaction_canceled` can be reduced by setting `*canceled` to be true in `DisableManualCompaction()` and `*canceled` to be false in the last time calling `EnableManualCompaction()`.

Changed Tests: The origin `DBTest2.PausingManualCompaction1` uses a callback function to increase `manual_compaction_paused` and the origin CompactionJob/CompactionIterator with `manual_compaction_paused` can detect this. I changed the callback function so that it sets `*canceled` as true if `canceled` is not `nullptr` (to notify CompactionJob/CompactionIterator the compaction has been canceled).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10070

Test Plan: This change does not introduce new features, but some slight difference in compaction implementation. Run the same manual compaction unit tests as before (e.g., PausingManualCompaction[1-4], CancelManualCompaction[1-2], CancelManualCompactionWithListener in db_test2, and db_compaction_test).

Reviewed By: ajkr

Differential Revision: D36949133

Pulled By: littlepig2013

fbshipit-source-id: c5dc4c956fbf8f624003a0f5ad2690240063a821
2022-06-06 18:32:26 -07:00
Gang Liao e6432dfd4c Make it possible to enable blob files starting from a certain LSM tree level (#10077)
Summary:
Currently, if blob files are enabled (i.e. `enable_blob_files` is true), large values are extracted both during flush/recovery (when SST files are written into level 0 of the LSM tree) and during compaction into any LSM tree level. For certain use cases that have a mix of short-lived and long-lived values, it might make sense to support extracting large values only during compactions whose output level is greater than or equal to a specified LSM tree level (e.g. compactions into L1/L2/... or above). This could reduce the space amplification caused by large values that are turned into garbage shortly after being written at the price of some write amplification incurred by long-lived values whose extraction to blob files is delayed.

In order to achieve this, we would like to do the following:
- Add a new configuration option `blob_file_starting_level` (default: 0) to `AdvancedColumnFamilyOptions` (and `MutableCFOptions` and extend the related logic)
- Instantiate `BlobFileBuilder` in `BuildTable` (used during flush and recovery, where the LSM tree level is L0) and `CompactionJob` iff `enable_blob_files` is set and the LSM tree level is `>= blob_file_starting_level`
- Add unit tests for the new functionality, and add the new option to our stress tests (`db_stress` and `db_crashtest.py` )
- Add the new option to our benchmarking tool `db_bench` and the BlobDB benchmark script `run_blob_bench.sh`
- Add the new option to the `ldb` tool (see https://github.com/facebook/rocksdb/wiki/Administration-and-Data-Access-Tool)
- Ideally extend the C and Java bindings with the new option
- Update the BlobDB wiki to document the new option.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10077

Reviewed By: ltamasi

Differential Revision: D36884156

Pulled By: gangliao

fbshipit-source-id: 942bab025f04633edca8564ed64791cb5e31627d
2022-06-02 20:04:33 -07:00
Bo Wang 5be1579ead Address comments for PR #9988 and #9996 (#10020)
Summary:
1. The latest change of DecideRateLimiterPriority in https://github.com/facebook/rocksdb/pull/9988 is reverted.
2. For https://github.com/facebook/rocksdb/blob/main/db/builder.cc#L345-L349
  2.1. Remove `we will regrad this verification as user reads` from the comments.
  2.2. `Do not set` the read_options.rate_limiter_priority to Env::IO_USER . Flush should be a background job.
  2.3. Update db_rate_limiter_test.cc.
3. In IOOptions, mark `prio` as deprecated for future removal.
4. In `file_system.h`, mark `IOPriority` as deprecated for future removal.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10020

Test Plan: Unit tests.

Reviewed By: ajkr

Differential Revision: D36525317

Pulled By: gitbw95

fbshipit-source-id: 011ba421822f8a124e6d25a2661c4e242df6ad36
2022-05-19 15:23:53 -07:00
Jay Zhuang c6d326d3d7 Track SST unique id in MANIFEST and verify (#9990)
Summary:
Start tracking SST unique id in MANIFEST, which is used to verify with
SST properties to make sure the SST file is not overwritten or
misplaced. A DB option `try_verify_sst_unique_id` is introduced to
enable/disable the verification, if enabled, it opens all SST files
during DB-open to read the unique_id from table properties (default is
false), so it's recommended to use it with `max_open_files = -1` to
pre-open the files.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9990

Test Plan: unittests, format-compatible test, mini-crash

Reviewed By: anand1976

Differential Revision: D36381863

Pulled By: jay-zhuang

fbshipit-source-id: 89ea2eb6b35ed3e80ead9c724eb096083eaba63f
2022-05-19 11:04:21 -07:00
gitbw95 4da34b97ee Set Read rate limiter priority dynamically and pass it to FS (#9996)
Summary:
### Context:
Background compactions and flush generate large reads and writes, and can be long running, especially for universal compaction. In some cases, this can impact foreground reads and writes by users.

### Solution
User, Flush, and Compaction reads share some code path. For this task, we update the rate_limiter_priority in ReadOptions for code paths (e.g. FindTable (mainly in BlockBasedTable::Open()) and various iterators), and eventually update the rate_limiter_priority in IOOptions for FSRandomAccessFile.

**This PR is for the Read path.** The **Read:** dynamic priority for different state are listed as follows:

| State | Normal | Delayed | Stalled |
| ----- | ------ | ------- | ------- |
|  Flush (verification read in BuildTable()) | IO_USER | IO_USER | IO_USER |
|  Compaction | IO_LOW  | IO_USER | IO_USER |
|  User | User provided | User provided | User provided |

We will respect the read_options that the user provided and will not set it.
The only sst read for Flush is the verification read in BuildTable(). It claims to be "regard as user read".

**Details**
1. Set read_options.rate_limiter_priority dynamically:
- User: Do not update the read_options. Use the read_options that the user provided.
- Compaction: Update read_options in CompactionJob::ProcessKeyValueCompaction().
- Flush: Update read_options in BuildTable().

2. Pass the rate limiter priority to FSRandomAccessFile functions:
- After calling the FindTable(), read_options is passed through GetTableReader(table_cache.cc), BlockBasedTableFactory::NewTableReader(block_based_table_factory.cc), and BlockBasedTable::Open(). The Open() needs some updates for the ReadOptions variable and the updates are also needed for the called functions,  including PrefetchTail(), PrepareIOOptions(), ReadFooterFromFile(), ReadMetaIndexblock(), ReadPropertiesBlock(), PrefetchIndexAndFilterBlocks(), and ReadRangeDelBlock().
- In RandomAccessFileReader, the functions to be updated include Read(), MultiRead(), ReadAsync(), and Prefetch().
- Update the downstream functions of NewIndexIterator(), NewDataBlockIterator(), and BlockBasedTableIterator().

### Test Plans
Add unit tests.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9996

Reviewed By: anand1976

Differential Revision: D36452483

Pulled By: gitbw95

fbshipit-source-id: 60978204a4f849bb9261cb78d9bc1cb56d6008cf
2022-05-18 19:41:44 -07:00
Yanqin Jin 3f263ef536 Add a temporary option for user to opt-out enforcement of SingleDelete contract (#9983)
Summary:
PR https://github.com/facebook/rocksdb/issues/9888 started to enforce the contract of single delete described in https://github.com/facebook/rocksdb/wiki/Single-Delete.

For some of existing use cases, it is desirable to have a transition during which compaction will not fail
if the contract is violated. Therefore, we add a temporary option `enforce_single_del_contracts` to allow
application to opt out from this new strict behavior. Once transition completes, the flag can be set to `true` again.

In a future release, the option will be removed.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9983

Test Plan: make check

Reviewed By: ajkr

Differential Revision: D36333672

Pulled By: riversand963

fbshipit-source-id: dcb703ea0ed08076a1422f1bfb9914afe3c2caa2
2022-05-16 15:44:59 -07:00
jsteemann 95663ff763 do not call DeleteFile for not-created sst files (#9920)
Summary:
When a memtable is flushed and the flush would lead to a 0 byte .sst
file being created, RocksDB does not write out the empty .sst file to
disk.
However it still calls Env::DeleteFile() on the file as part of some
cleanup procedure at the end of BuildTable().
Because the to-be-deleted file does not exist, this requires
implementors of the DeleteFile() API to check if the file exists on
their own code, or otherwise risk running into PathNotFound errors when
DeleteFile is invoked on non-existing files.
This PR fixes the situation so that when no .sst file is created,
Deletefile will not be called either.
TableFileCreationStarted() will still be called as before.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9920

Reviewed By: ajkr

Differential Revision: D36107102

Pulled By: riversand963

fbshipit-source-id: 15881ba3fa3192dd448f906280a1cfc7a68a114a
2022-05-04 10:15:30 -07:00
Levi Tamasi db536ee045 Propagate errors from UpdateBoundaries (#9851)
Summary:
In `FileMetaData`, we keep track of the lowest-numbered blob file
referenced by the SST file in question for the purposes of BlobDB's
garbage collection in the `oldest_blob_file_number` field, which is
updated in `UpdateBoundaries`. However, with the current code,
`BlobIndex` decoding errors (or invalid blob file numbers) are swallowed
in this method. The patch changes this by propagating these errors
and failing the corresponding flush/compaction. (Note that since blob
references are generated by the BlobDB code and also parsed by
`CompactionIterator`, in reality this can only happen in the case of
memory corruption.)

This change necessitated updating some unit tests that involved
fake/corrupt `BlobIndex` objects. Some of these just used a dummy string like
`"blob_index"` as a placeholder; these were replaced with real `BlobIndex`es.
Some were relying on the earlier behavior to simulate corruption; these
were replaced with `SyncPoint`-based test code that corrupts a valid
blob reference at read time.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9851

Test Plan: `make check`

Reviewed By: riversand963

Differential Revision: D35683671

Pulled By: ltamasi

fbshipit-source-id: f7387af9945c48e4d5c4cd864f1ba425c7ad51f6
2022-04-15 20:25:48 -07:00
Yanqin Jin 0bd4dcde6b CompactionIterator sees consistent view of which keys are committed (#9830)
Summary:
**This PR does not affect the functionality of `DB` and write-committed transactions.**

`CompactionIterator` uses `KeyCommitted(seq)` to determine if a key in the database is committed.
As the name 'write-committed' implies, if write-committed policy is used, a key exists in the database only if
it is committed. In fact, the implementation of `KeyCommitted()` is as follows:

```
inline bool KeyCommitted(SequenceNumber seq) {
  // For non-txn-db and write-committed, snapshot_checker_ is always nullptr.
  return snapshot_checker_ == nullptr ||
         snapshot_checker_->CheckInSnapshot(seq, kMaxSequence) == SnapshotCheckerResult::kInSnapshot;
}
```

With that being said, we focus on write-prepared/write-unprepared transactions.

A few notes:
- A key can exist in the db even if it's uncommitted. Therefore, we rely on `snapshot_checker_` to determine data visibility. We also require that all writes go through transaction API instead of the raw `WriteBatch` + `Write`, thus at most one uncommitted version of one user key can exist in the database.
- `CompactionIterator` outputs a key as long as the key is uncommitted.

Due to the above reasons, it is possible that `CompactionIterator` decides to output an uncommitted key without
doing further checks on the key (`NextFromInput()`). By the time the key is being prepared for output, the key becomes
committed because the `snapshot_checker_(seq, kMaxSequence)` becomes true in the implementation of `KeyCommitted()`.
Then `CompactionIterator` will try to zero its sequence number and hit assertion error if the key is a tombstone.

To fix this issue, we should make the `CompactionIterator` see a consistent view of the input keys. Note that
for write-prepared/write-unprepared, the background flush/compaction jobs already take a "job snapshot" before starting
processing keys. The job snapshot is released only after the entire flush/compaction finishes. We can use this snapshot
to determine whether a key is committed or not with minor change to `KeyCommitted()`.

```
inline bool KeyCommitted(SequenceNumber sequence) {
  // For non-txn-db and write-committed, snapshot_checker_ is always nullptr.
  return snapshot_checker_ == nullptr ||
         snapshot_checker_->CheckInSnapshot(sequence, job_snapshot_) ==
             SnapshotCheckerResult::kInSnapshot;
}
```

As a result, whether a key is committed or not will remain a constant throughout compaction, causing no trouble
for `CompactionIterator`s assertions.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9830

Test Plan: make check

Reviewed By: ltamasi

Differential Revision: D35561162

Pulled By: riversand963

fbshipit-source-id: 0e00d200c195240341cfe6d34cbc86798b315b9f
2022-04-14 11:11:04 -07:00
Yanqin Jin 0ad9ee30ce Remove dead code (#9825)
Summary:
Options `preserve_deletes` and `iter_start_seqnum` have been removed since 7.0.

This PR removes dead code related to these two removed options.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9825

Test Plan: make check

Reviewed By: akankshamahajan15

Differential Revision: D35517950

Pulled By: riversand963

fbshipit-source-id: 86282ce5ec4087acb94a06a42a1b6d55b1715482
2022-04-11 10:26:55 -07:00
anand76 a88d8795ec Expand auto recovery to background read errors (#9679)
Summary:
Fix and enhance the background error recovery logic to handle the
following situations -
1. Background read errors during flush/compaction (previously was
resulting in unrecoverable state)
2. Fix auto recovery failure on read/write errors during atomic flush.
It was failing due to a bug in setting the resuming_from_bg_err variable
in AtomicFlushMemTablesToOutputFiles.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9679

Test Plan: Add new unit tests in error_handler_fs_test

Reviewed By: riversand963

Differential Revision: D34770097

Pulled By: anand1976

fbshipit-source-id: 136da973a28d684b9c74bdf668519b0cbbbe1742
2022-03-15 14:45:34 -07:00
Peter Dillinger fc9d4071f0 Fast path for detecting unchanged prefix_extractor (#9407)
Summary:
Fixes a major performance regression in 6.26, where
extra CPU is spent in SliceTransform::AsString when reads involve
a prefix_extractor (Get, MultiGet, Seek). Common case performance
is now better than 6.25.

This change creates a "fast path" for verifying that the current prefix
extractor is unchanged and compatible with what was used to
generate a table file. This fast path detects the common case by
pointer comparison on the current prefix_extractor and a "known
good" prefix extractor (if applicable) that is saved at the time the
table reader is opened. The "known good" prefix extractor is saved
as another shared_ptr copy (in an existing field, however) to ensure
the pointer is not recycled.

When the prefix_extractor has changed to a different instance but
same compatible configuration (rare, odd), performance is still a
regression compared to 6.25, but this is likely acceptable because
of the oddity of such a case. The performance of incompatible
prefix_extractor is essentially unchanged.

Also fixed a minor case (ForwardIterator) where a prefix_extractor
could be used via a raw pointer after being freed as a shared_ptr,
if replaced via SetOptions.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407

Test Plan:
## Performance
Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`

Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`

Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load)

v6.26: 4833 vs. 6698 (<- major regression!)
v6.27: 4737 vs. 6397 (still)
New: 6704 vs. 6461 (better than baseline in common case)
Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible)
Changed prefix size (no usable filter) in new: 787 vs. 5927
Changed prefix size (no usable filter) in new & baseline: 773 vs. 784

Reviewed By: mrambacher

Differential Revision: D33677812

Pulled By: pdillinger

fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76
2022-01-21 11:37:46 -08:00
Peter Dillinger 2b60621f16 Don't call OnTableFileCreated with OK for empty+deleted file (#9118)
Summary:
EventListener::OnTableFileCreated was previously called with OK
status and file_size==0 in cases of no SST file contents written
(because there was no content to add) and the empty file deleted before
calling the listener. This could lead to a stress test assertion failure
added in https://github.com/facebook/rocksdb/issues/9054.

This changes the status to Aborted, to align with the API doc:
"... if the file is successfully created. Now it will also be called on
failure case. User can check info.status to see if it succeeded or not."
For internal purposes, this case is considered "success" but for
listener purposes, no SST file is (successfully) created.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9118

Test Plan: test case added + existing db_stress

Reviewed By: ajkr, riversand963

Differential Revision: D32120232

Pulled By: pdillinger

fbshipit-source-id: a804e2e0a52598018d3b182da97804d402ffcdfa
2021-11-03 08:43:27 -07:00
mrambacher 13ae16c315 Cleanup includes in dbformat.h (#8930)
Summary:
This header file was including everything and the kitchen sink when it did not need to.  This resulted in many places including this header when they needed other pieces instead.

Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing.

Hopefully, this sort of code hygiene cleanup will speed up the builds...

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930

Reviewed By: pdillinger

Differential Revision: D31142788

Pulled By: mrambacher

fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d
2021-09-29 04:04:40 -07:00
Akanksha Mahajan d6aa8c49f8 Expose blob file information through the EventListener interface (#8675)
Summary:
1. Extend FlushJobInfo and CompactionJobInfo with information about the blob files generated by flush/compaction jobs. This PR add two structures BlobFileInfo and BlobFileGarbageInfo that contains the required information of blob files.
 2. Notify the creation and deletion of blob files through OnBlobFileCreationStarted, OnBlobFileCreated, and OnBlobFileDeleted.
 3. Test OnFile*Finish operations notifications with Blob Files.
 4. Log the blob file creation/deletion events through EventLogger in Log file.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8675

Test Plan: Add new unit tests in listener_test

Reviewed By: ltamasi

Differential Revision: D30412613

Pulled By: akankshamahajan15

fbshipit-source-id: ca51b63c6e8c8d0485a38c503572bc5a82bd5d07
2021-09-16 17:23:36 -07:00
Baptiste Lemaire 9dc887ece0 Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454

Reviewed By: anand1976

Differential Revision: D29433971

Pulled By: bjlemaire

fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
2021-07-02 05:23:02 -07:00
Zhichao Cao a904c62d28 Using existing crc32c checksum in checksum handoff for Manifest and WAL (#8412)
Summary:
In PR https://github.com/facebook/rocksdb/issues/7523 , checksum handoff is introduced in RocksDB for WAL, Manifest, and SST files. When user enable checksum handoff for a certain type of file, before the data is written to the lower layer storage system, we calculate the checksum (crc32c) of each piece of data and pass the checksum down with the data, such that data verification can be down by the lower layer storage system if it has the capability. However, it cannot cover the whole lifetime of the data in the memory and also it potentially introduces extra checksum calculation overhead.

In this PR, we introduce a new interface in WritableFileWriter::Append, which allows the caller be able to pass the data and the checksum (crc32c) together. In this way, WritableFileWriter can directly use the pass-in checksum (crc32c) to generate the checksum of data being passed down to the storage system. It saves the calculation overhead and achieves higher protection coverage. When a new checksum is added with the data, we use Crc32cCombine https://github.com/facebook/rocksdb/issues/8305 to combine the existing checksum and the new checksum. To avoid the segmenting of data by rate-limiter before it is stored, rate-limiter is called enough times to accumulate enough credits for a certain write. This design only support Manifest and WAL which use log_writer in the current stage.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8412

Test Plan: make check, add new testing cases.

Reviewed By: anand1976

Differential Revision: D29151545

Pulled By: zhichao-cao

fbshipit-source-id: 75e2278c5126cfd58393c67b1efd18dcc7a30772
2021-06-25 00:47:17 -07:00
Baptiste Lemaire e817bc9628 Added memtable garbage statistics (#8411)
Summary:
**Summary**:
2 new statistics counters are added to RocksDB: `MEMTABLE_PAYLOAD_BYTES_AT_FLUSH` and `MEMTABLE_GARBAGE_BYTES_AT_FLUSH`. The former tracks how many raw bytes of useful data are present on the memtable at flush time, whereas the latter is tracks how many of these raw bytes are considered garbage, meaning that they ended up not being imported on the SSTables resulting from the flush operations.

**Unit test**: run `make db_flush_test -j$(nproc); ./db_flush_test` to run the unit test.
This executable includes 3 tests, that test support and correct stat calculations for workloads with inserts, deletes, and DeleteRanges. The parameters are set such that the workloads are performed on a single memtable, and a single SSTable is created as a result of the flush operation. The flush operation is manually called in the test file. The tests verify that the values of these 2 statistics counters introduced in this PR  can be exactly predicted, showing that we have a full understanding of the underlying operations.

**Performance testing**:
`./db_bench -statistics -benchmarks=fillrandom -num=10000000` repeated 10 times.
Timing done using "date" function in a bash script.
_Results_:
Original Rocksdb fork: mean 66.6 sec, std 1.18 sec.
This feature branch: mean 67.4 sec, std 1.35 sec.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8411

Reviewed By: akankshamahajan15

Differential Revision: D29150629

Pulled By: bjlemaire

fbshipit-source-id: 7b3c2e86d50c6aa34fa50fd134282eacb543a5b1
2021-06-18 04:57:27 -07:00
David Devecsery 80a59a03a7 Cancel compact range (#8351)
Summary:
Added the ability to cancel an in-progress range compaction by storing to an atomic "canceled" variable pointed to within the CompactRangeOptions structure.

Tested via two tests added to db_tests2.cc.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8351

Reviewed By: ajkr

Differential Revision: D28808894

Pulled By: ddevec

fbshipit-source-id: cb321361c9e23b084b188bb203f11c375a22c2dd
2021-06-07 11:41:31 -07:00
sdong 2f1984dd45 Compare memtable insert and flush count (#8288)
Summary:
When a memtable is flushed, it will validate number of entries it reads, and compare the number with how many entries inserted into memtable. This serves as one sanity c\
heck against memory corruption. This change will also allow more counters to be added in the future for better validation.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8288

Test Plan: Pass all existing tests

Reviewed By: ajkr

Differential Revision: D28369194

fbshipit-source-id: 7ff870380c41eab7f99eee508550dcdce32838ad
2021-05-20 16:07:28 -07:00
Andrew Kryczka a639c02f8e Allow applying `CompactionFilter` outside of compaction (#8243)
Summary:
From HISTORY.md release note:

- Allow `CompactionFilter`s to apply in more table file creation scenarios such as flush and recovery. For compatibility, `CompactionFilter`s by default apply during compaction. Users can customize this behavior by overriding `CompactionFilterFactory::ShouldFilterTableFileCreation()`.
- Removed unused structure `CompactionFilterContext`

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8243

Test Plan: added unit tests

Reviewed By: pdillinger

Differential Revision: D28088089

Pulled By: ajkr

fbshipit-source-id: 0799be7908e3b39fea09fc3f1ab00e13ad817fae
2021-05-07 16:01:40 -07:00
Peter Dillinger d2ca04e3ed Add more LSM info to FilterBuildingContext (#8246)
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.

To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.

I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)

At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)

Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246

Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost

Reviewed By: mrambacher

Differential Revision: D28099346

Pulled By: pdillinger

fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 13:50:13 -07:00
Peter Dillinger 85becd94c1 Refactor: use TableBuilderOptions to reduce parameter lists (#8240)
Summary:
Greatly reduced the not-quite-copy-paste giant parameter lists
of rocksdb::NewTableBuilder, rocksdb::BuildTable,
BlockBasedTableBuilder::Rep ctor, and BlockBasedTableBuilder ctor.

Moved weird separate parameter `uint32_t column_family_id` of
TableFactory::NewTableBuilder into TableBuilderOptions.

Re-ordered parameters to TableBuilderOptions ctor, so that `uint64_t
target_file_size` is not randomly placed between uint64_t timestamps
(was easy to mix up).

Replaced a couple of fields of BlockBasedTableBuilder::Rep with a
FilterBuildingContext. The motivation for this change is making it
easier to pass along more data into new fields in FilterBuildingContext
(follow-up PR).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8240

Test Plan: ASAN make check

Reviewed By: mrambacher

Differential Revision: D28075891

Pulled By: pdillinger

fbshipit-source-id: fddb3dbb8260a0e8bdcbb51b877ebabf9a690d4f
2021-04-29 07:00:50 -07:00
mrambacher 0ca6d6297f Rename variables in ImmutableCFOptions to avoid conflicts with ImmutableDBOptions (#8227)
Summary:
Renaming ImmutableCFOptions::info_log and statistics to logger and stats.  This is stage 2 in creating an ImmutableOptions class.  It is necessary because the names match those in ImmutableOptions and have different types.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8227

Reviewed By: jay-zhuang

Differential Revision: D28000967

Pulled By: mrambacher

fbshipit-source-id: 3bf2aa04e8f1e8724d825b7deacf41080c14420b
2021-04-26 12:43:45 -07:00
mrambacher 01e460d538 Make types of Immutable/Mutable Options fields match that of the underlying Option (#8176)
Summary:
This PR is a first step at attempting to clean up some of the Mutable/Immutable Options code.  With this change, a DBOption and a ColumnFamilyOption can be reconstructed from their Mutable and Immutable equivalents, respectively.

readrandom tests do not show any performance degradation versus master (though both are slightly slower than the current 6.19 release).

There are still fields in the ImmutableCFOptions that are not CF options but DB options.  Eventually, I would like to move those into an ImmutableOptions (= ImmutableDBOptions+ImmutableCFOptions).  But that will be part of a future PR to minimize changes and disruptions.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8176

Reviewed By: pdillinger

Differential Revision: D27954339

Pulled By: mrambacher

fbshipit-source-id: ec6b805ba9afe6e094bffdbd76246c2d99aa9fad
2021-04-22 20:43:54 -07:00