Summary:
Add support to allow enabling / disabling user-defined timestamps feature for an existing column family in combination with the in-Memtable only feature.
To do this, this PR includes:
1) Log the `persist_user_defined_timestamps` option per column family in Manifest to facilitate detecting an attempt to enable / disable UDT. This entry is enforced to be logged in the same VersionEdit as the user comparator name entry.
2) User-defined timestamps related options are validated when re-opening a column family, including user comparator name and the `persist_user_defined_timestamps` flag. These type of settings and settings change are considered valid:
a) no user comparator change and no effective `persist_user_defined_timestamp` flag change.
b) switch user comparator to enable UDT provided the immediately effective `persist_user_defined_timestamps` flag
is false.
c) switch user comparator to disable UDT provided that the before-change `persist_user_defined_timestamps` is
already false.
3) when an attempt to enable UDT is detected, we mark all its existing SST files as "having no UDT" by marking its `FileMetaData.user_defined_timestamps_persisted` flag to false and handle their file boundaries `FileMetaData.smallest`, `FileMetaData.largest` by padding a min timestamp.
4) while enabling / disabling UDT feature, timestamp size inconsistency in existing WAL logs are handled to make it compatible with the running user comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11623
Test Plan:
```
make all check
./db_with_timestamp_basic_test --gtest-filter="*EnableDisableUDT*"
./db_wal_test --gtest_filter="*EnableDisableUDT*"
```
Reviewed By: ltamasi
Differential Revision: D47636862
Pulled By: jowlyzhang
fbshipit-source-id: dcd19f67292da3c3cc9584c09ad00331c9ab9322
Summary:
Handle file boundaries `FileMetaData.smallest`, `FileMetaData.largest` for when `persist_user_defined_timestamps` is false:
1) on the manifest write path, the original user-defined timestamps in file boundaries are stripped. This stripping is done during `VersionEdit::Encode` to limit the effect of the stripping to only the persisted version of the file boundaries.
2) on the manifest read path during DB open, a a min timestamp is padded to the file boundaries. Ideally, this padding should happen during `VersionEdit::Decode` so that all in memory file boundaries have a compatible user key format as the running user comparator. However, because the user-defined timestamp size information is not available at that time. This change is added to `VersionEditHandler::OnNonCfOperation`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11578
Test Plan:
```
make all check
./version_edit_test --gtest_filter="*EncodeDecodeNewFile4HandleFileBoundary*".
./db_with_timestamp_basic_test --gtest_filter="*HandleFileBoundariesTest*"
```
Reviewed By: pdillinger
Differential Revision: D47309399
Pulled By: jowlyzhang
fbshipit-source-id: 21b4d54d2089a62826b31d779094a39cb2bbbd51
Summary:
Start to record the value of the flag `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` in the Manifest and table properties for a SST file when it is created. And use the recorded flag when creating a table reader for the SST file. This flag's default value is true, it is only explicitly recorded if it's false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11515
Test Plan:
```
make all check
./version_edit_test
```
Reviewed By: ltamasi
Differential Revision: D46920386
Pulled By: jowlyzhang
fbshipit-source-id: 075c20363d3d2cc1368422ecc805617ed135cc26
Summary:
**Context:**
We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics.
**Summary:**
- Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()`
- For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more.
- Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406
Test Plan:
1. New UT
2. db bench
Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison.
```
diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc
index bd5669f0f..791484c1f 100644
--- a/table/block_based/block_based_table_reader.cc
+++ b/table/block_based/block_based_table_reader.cc
@@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail(
&tail_prefetch_size);
// Try file system prefetch
- if (!file->use_direct_io() && !force_direct_prefetch) {
+ if (false && !file->use_direct_io() && !force_direct_prefetch) {
if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority)
.IsNotSupported()) {
prefetch_buffer->reset(new FilePrefetchBuffer(
diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc
index ea40f5fa0..39a0ac385 100644
--- a/tools/db_bench_tool.cc
+++ b/tools/db_bench_tool.cc
@@ -4191,6 +4191,8 @@ class Benchmark {
std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options));
} else {
BlockBasedTableOptions block_based_options;
+ block_based_options.metadata_cache_options.partition_pinning =
+ PinningTier::kAll;
block_based_options.checksum =
static_cast<ChecksumType>(FLAGS_checksum_type);
if (FLAGS_use_hash_search) {
```
Create DB
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
ReadRandom
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
(a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 3395
rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614
```
(b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 14257
rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540
```
As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR
3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR.
Reviewed By: pdillinger
Differential Revision: D45413346
Pulled By: hx235
fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064
Summary:
compensate file sizes in compaction picking so files with range tombstones are preferred, such that they get compacted down earlier as they tend to delete a lot of data. This PR adds a `compensated_range_deletion_size` field in FileMeta that is computed during Flush/Compaction and persisted in MANIFEST. This value is added to `compensated_file_size` which will be used for compaction picking. Currently, for a file in level L, `compensated_range_deletion_size` is set to the estimated bytes deleted by range tombstone of this file in all levels > L. This helps to reduce space amp when data in older levels are covered by range tombstones in level L.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10734
Test Plan:
- Added unit tests.
- benchmark to check if the above definition `compensated_range_deletion_size` is reducing space amp as intended, without affecting write amp too much. The experiment set up favorable for this optimization: large range tombstone issued infrequently. Command used:
```
./db_bench -benchmarks=fillrandom,waitforcompaction,stats,levelstats -use_existing_db=false -avoid_flush_during_recovery=true -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -max_bytes_for_level_base=134217728 -target_file_size_base=33554432 -writes_per_range_tombstone=500000 -range_tombstone_width=5000000 -num=50000000 -benchmark_write_rate_limit=8388608 -threads=16 -duration=1800 --max_num_range_tombstones=1000000000
```
In this experiment, each thread wrote 16 range tombstones over the duration of 30 minutes, each range tombstone has width 5M that is the 10% of the key space width. Results shows this PR generates a smaller DB size.
Compaction stats from this PR:
```
Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 2/0 31.54 MB 0.5 0.0 0.0 0.0 8.4 8.4 0.0 1.0 0.0 63.4 135.56 110.94 544 0.249 0 0 0.0 0.0
L4 3/0 96.55 MB 0.8 18.5 6.7 11.8 18.4 6.6 0.0 2.7 65.3 64.9 290.08 284.03 108 2.686 284M 1957K 0.0 0.0
L5 15/0 404.41 MB 1.0 19.1 7.7 11.4 18.8 7.4 0.3 2.5 66.6 65.7 292.93 285.34 220 1.332 293M 3808K 0.0 0.0
L6 143/0 4.12 GB 0.0 45.0 7.5 37.5 41.6 4.1 0.0 5.5 71.2 65.9 647.00 632.66 251 2.578 739M 47M 0.0 0.0
Sum 163/0 4.64 GB 0.0 82.6 21.9 60.7 87.2 26.5 0.3 10.4 61.9 65.4 1365.58 1312.97 1123 1.216 1318M 52M 0.0 0.0
```
Compaction stats from main:
```
Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 0/0 0.00 KB 0.0 0.0 0.0 0.0 8.4 8.4 0.0 1.0 0.0 60.5 142.12 115.89 569 0.250 0 0 0.0 0.0
L4 3/0 85.68 MB 1.0 17.7 6.8 10.9 17.6 6.7 0.0 2.6 62.7 62.3 289.05 281.79 112 2.581 272M 2309K 0.0 0.0
L5 11/0 293.73 MB 1.0 18.8 7.5 11.2 18.5 7.2 0.5 2.5 64.9 63.9 296.07 288.50 220 1.346 288M 4365K 0.0 0.0
L6 130/0 3.94 GB 0.0 51.5 7.6 43.9 47.9 3.9 0.0 6.3 67.2 62.4 784.95 765.92 258 3.042 848M 51M 0.0 0.0
Sum 144/0 4.31 GB 0.0 88.0 21.9 66.0 92.3 26.3 0.5 11.0 59.6 62.5 1512.19 1452.09 1159 1.305 1409M 58M 0.0 0.0```
Reviewed By: ajkr
Differential Revision: D39834713
Pulled By: cbi42
fbshipit-source-id: fe9341040b8704a8fbb10cad5cf5c43e962c7e6b
Summary:
**Context:**
Sorting L0 files by `largest_seqno` has at least two inconvenience:
- File ingestion and compaction involving ingested files can create files of overlapping seqno range with the existing files. `force_consistency_check=true` will catch such overlap seqno range even those harmless overlap.
- For example, consider the following sequence of events ("key@n" indicates key at seqno "n")
- insert k1@1 to memtable m1
- ingest file s1 with k2@2, ingest file s2 with k3@3
- insert k4@4 to m1
- compact files s1, s2 and result in new file s3 of seqno range [2, 3]
- flush m1 and result in new file s4 of seqno range [1, 4]. And `force_consistency_check=true` will think s4 and s3 has file reordering corruption that might cause retuning an old value of k1
- However such caught corruption is a false positive since s1, s2 will not have overlapped keys with k1 or whatever inserted into m1 before ingest file s1 by the requirement of file ingestion (otherwise the m1 will be flushed first before any of the file ingestion completes). Therefore there in fact isn't any file reordering corruption.
- Single delete can decrease a file's largest seqno and ordering by `largest_seqno` can introduce a wrong ordering hence file reordering corruption
- For example, consider the following sequence of events ("key@n" indicates key at seqno "n", Credit to ajkr for this example)
- an existing SST s1 contains only k1@1
- insert k1@2 to memtable m1
- ingest file s2 with k3@3, ingest file s3 with k4@4
- insert single delete k5@5 in m1
- flush m1 and result in new file s4 of seqno range [2, 5]
- compact s1, s2, s3 and result in new file s5 of seqno range [1, 4]
- compact s4 and result in new file s6 of seqno range [2] due to single delete
- By the last step, we have file ordering by largest seqno (">" means "newer") : s5 > s6 while s6 contains a newer version of the k1's value (i.e, k1@2) than s5, which is a real reordering corruption. While this can be caught by `force_consistency_check=true`, there isn't a good way to prevent this from happening if ordering by `largest_seqno`
Therefore, we are redesigning the sorting criteria of L0 files and avoid above inconvenience. Credit to ajkr , we now introduce `epoch_num` which describes the order of a file being flushed or ingested/imported (compaction output file will has the minimum `epoch_num` among input files'). This will avoid the above inconvenience in the following ways:
- In the first case above, there will no longer be overlap seqno range check in `force_consistency_check=true` but `epoch_number` ordering check. This will result in file ordering s1 < s2 < s4 (pre-compaction) and s3 < s4 (post-compaction) which won't trigger false positive corruption. See test class `DBCompactionTestL0FilesMisorderCorruption*` for more.
- In the second case above, this will result in file ordering s1 < s2 < s3 < s4 (pre-compacting s1, s2, s3), s5 < s4 (post-compacting s1, s2, s3), s5 < s6 (post-compacting s4), which are correct file ordering without causing any corruption.
**Summary:**
- Introduce `epoch_number` stored per `ColumnFamilyData` and sort CF's L0 files by their assigned `epoch_number` instead of `largest_seqno`.
- `epoch_number` is increased and assigned upon `VersionEdit::AddFile()` for flush (or similarly for WriteLevel0TableForRecovery) and file ingestion (except for allow_behind_true, which will always get assigned as the `kReservedEpochNumberForFileIngestedBehind`)
- Compaction output file is assigned with the minimum `epoch_number` among input files'
- Refit level: reuse refitted file's epoch_number
- Other paths needing `epoch_number` treatment:
- Import column families: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`
- Repair: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`.
- Assigning new epoch_number to a file and adding this file to LSM tree should be atomic. This is guaranteed by us assigning epoch_number right upon `VersionEdit::AddFile()` where this version edit will be apply to LSM tree shape right after by holding the db mutex (e.g, flush, file ingestion, import column family) or by there is only 1 ongoing edit per CF (e.g, WriteLevel0TableForRecovery, Repair).
- Assigning the minimum input epoch number to compaction output file won't misorder L0 files (even through later `Refit(target_level=0)`). It's due to for every key "k" in the input range, a legit compaction will cover a continuous epoch number range of that key. As long as we assign the key "k" the minimum input epoch number, it won't become newer or older than the versions of this key that aren't included in this compaction hence no misorder.
- Persist `epoch_number` of each file in manifest and recover `epoch_number` on db recovery
- Backward compatibility with old db without `epoch_number` support is guaranteed by assigning `epoch_number` to recovered files by `NewestFirstBySeqno` order. See `VersionStorageInfo::RecoverEpochNumbers()` for more
- Forward compatibility with manifest is guaranteed by flexibility of `NewFileCustomTag`
- Replace `force_consistent_check` on L0 with `epoch_number` and remove false positive check like case 1 with `largest_seqno` above
- Due to backward compatibility issue, we might encounter files with missing epoch number at the beginning of db recovery. We will still use old L0 sorting mechanism (`NewestFirstBySeqno`) to check/sort them till we infer their epoch number. See usages of `EpochNumberRequirement`.
- Remove fix https://github.com/facebook/rocksdb/pull/5958#issue-511150930 and their outdated tests to file reordering corruption because such fix can be replaced by this PR.
- Misc:
- update existing tests with `epoch_number` so make check will pass
- update https://github.com/facebook/rocksdb/pull/5958#issue-511150930 tests to verify corruption is fixed using `epoch_number` and cover universal/fifo compaction/CompactRange/CompactFile cases
- assert db_mutex is held for a few places before calling ColumnFamilyData::NewEpochNumber()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10922
Test Plan:
- `make check`
- New unit tests under `db/db_compaction_test.cc`, `db/db_test2.cc`, `db/version_builder_test.cc`, `db/repair_test.cc`
- Updated tests (i.e, `DBCompactionTestL0FilesMisorderCorruption*`) under https://github.com/facebook/rocksdb/pull/5958#issue-511150930
- [Ongoing] Compatibility test: manually run 36a5686ec0 (with file ingestion off for running the `.orig` binary to prevent this bug affecting upgrade/downgrade formality checking) for 1 hour on `simple black/white box`, `cf_consistency/txn/enable_ts with whitebox + test_best_efforts_recovery with blackbox`
- [Ongoing] normal db stress test
- [Ongoing] db stress test with aggressive value https://github.com/facebook/rocksdb/pull/10761
Reviewed By: ajkr
Differential Revision: D41063187
Pulled By: hx235
fbshipit-source-id: 826cb23455de7beaabe2d16c57682a82733a32a9
Summary:
Instead of existing calls to ps from gnu_parallel, call a new wrapper that does ps, looks for unit test like processes, and uses pstack or gdb to print thread stack traces. Also, using `ps -wwf` instead of `ps -wf` ensures output is not cut off.
For security, CircleCI runs with security restrictions on ptrace (/proc/sys/kernel/yama/ptrace_scope = 1), and this change adds a work-around to `InstallStackTraceHandler()` (only used by testing tools) to allow any process from the same user to debug it. (I've also touched >100 files to ensure all the unit tests call this function.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10828
Test Plan: local manual + temporary infinite loop in a unit test to observe in CircleCI
Reviewed By: hx235
Differential Revision: D40447634
Pulled By: pdillinger
fbshipit-source-id: 718a4c4a5b54fa0f9af2d01a446162b45e5e84e1
Summary:
FileMetaData::[min|max]_timestamp are not currently being used or
tracked by RocksDB, even when user-defined timestamp is enabled. Each of
them is a std::string which can occupy 32 bytes. Remove them for now.
They may be added back when we have a pressing need for them. When we do
add them back, consider store them in a more compact way, e.g. one
boolean flag and a byte array of size 16.
Per file min/max timestamp bounds are available as table properties.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10443
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D38292275
Pulled By: riversand963
fbshipit-source-id: 841dc4e855ad8f8481c80cb020603de9607c9c94
Summary:
Start tracking SST unique id in MANIFEST, which is used to verify with
SST properties to make sure the SST file is not overwritten or
misplaced. A DB option `try_verify_sst_unique_id` is introduced to
enable/disable the verification, if enabled, it opens all SST files
during DB-open to read the unique_id from table properties (default is
false), so it's recommended to use it with `max_open_files = -1` to
pre-open the files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9990
Test Plan: unittests, format-compatible test, mini-crash
Reviewed By: anand1976
Differential Revision: D36381863
Pulled By: jay-zhuang
fbshipit-source-id: 89ea2eb6b35ed3e80ead9c724eb096083eaba63f
Summary:
In `FileMetaData`, we keep track of the lowest-numbered blob file
referenced by the SST file in question for the purposes of BlobDB's
garbage collection in the `oldest_blob_file_number` field, which is
updated in `UpdateBoundaries`. However, with the current code,
`BlobIndex` decoding errors (or invalid blob file numbers) are swallowed
in this method. The patch changes this by propagating these errors
and failing the corresponding flush/compaction. (Note that since blob
references are generated by the BlobDB code and also parsed by
`CompactionIterator`, in reality this can only happen in the case of
memory corruption.)
This change necessitated updating some unit tests that involved
fake/corrupt `BlobIndex` objects. Some of these just used a dummy string like
`"blob_index"` as a placeholder; these were replaced with real `BlobIndex`es.
Some were relying on the earlier behavior to simulate corruption; these
were replaced with `SyncPoint`-based test code that corrupts a valid
blob reference at read time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9851
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D35683671
Pulled By: ltamasi
fbshipit-source-id: f7387af9945c48e4d5c4cd864f1ba425c7ad51f6
Summary:
Fix a bug that causes file temperature not preserved after DB is restarted, or options.max_manifest_file_size is hit.
Also, pass temperature information to NewRandomAccessFile() to allow users to hack a solution where they don't preserve tiering information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9242
Test Plan: Add a unit test that would fail without the fix.
Reviewed By: jay-zhuang
Differential Revision: D32818150
fbshipit-source-id: 36aa3f148c60107f7b8e9d65b63b039f9e1a1eec
Summary:
Track per-SST user-defined timestamp information in MANIFEST https://github.com/facebook/rocksdb/issues/8957
Rockdb has supported user-defined timestamp feature. Application can specify a timestamp
when writing each k-v pair. When data flush from memory to disk file called SST files, file
creation activity will commit to MANIFEST. This commit is for tracking timestamp info in the
MANIFEST for each file. The changes involved are as follows:
1) Track max/min timestamp in FileMetaData, and fix invoved codes.
2) Add NewFileCustomTag::kMinTimestamp and NewFileCustomTag::kMinTimestamp in
NewFileCustomTag ( in the kNewFile4 part ), and support invoved codes such as
VersionEdit Encode and Decode etc.
3) Add unit test code for VersionEdit EncodeDecodeNewFile4, and fix invoved test codes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9092
Reviewed By: ajkr, akankshamahajan15
Differential Revision: D32252323
Pulled By: riversand963
fbshipit-source-id: d2642898d6e3ad1fef0eb866b98045408bd4e162
Summary:
Although the tags for `WalAddition`, `WalDeletion` are after `kTagSafeIgnoreMask`, to actually be able to skip these entries in older versions of RocksDB, we require that they are encoded with their encoded size as the prefix. This requirement is not met in the current codebase, so a downgraded DB may fail to open if these entries exist in the MANIFEST.
If a DB wants to downgrade, and its MANIFEST contains `WalAddition` or `WalDeletion`, it can set `track_and_verify_wals_in_manifest` to `false`, then restart twice, then downgrade. On the first restart, a new MANIFEST will be created with a `WalDeletion` indicating that all previously tracked WALs are removed from MANIFEST. On the second restart, since there is no tracked WALs in MANIFEST now, a new MANIFEST will be created with neither `WalAddition` nor `WalDeletion`. Then the DB can downgrade.
Tags for `BlobFileAddition`, `BlobFileGarbage` also have the same problem, but this PR focuses on solving the problem for WAL edits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7873
Test Plan: Added a `VersionEditTest::IgnorableTags` unit test to verify all entries with tags larger than `kTagSafeIgnoreMask` can actually be skipped and won't affect parsing of other entries.
Reviewed By: ajkr
Differential Revision: D25935930
Pulled By: cheng-chang
fbshipit-source-id: 7a02fdba4311d6084328c14aed110a26d08c3efb
Summary:
Following https://github.com/facebook/rocksdb/issues/7655 and https://github.com/facebook/rocksdb/issues/7657, this PR adds `full_history_ts_low_` to `ColumnFamilyData`.
`ColumnFamilyData::full_history_ts_low_` will be used to create `FlushJob` and `CompactionJob`.
`ColumnFamilyData::full_history_ts_low` is persisted to the MANIFEST file. An application can only
increase its value. Consider the following case:
>
> The database has a key at ts=950. `full_history_ts_low` is first set to 1000, and then a GC is triggered
> and cleans up all data older than 1000. If the application sets `full_history_ts_low` to 900 afterwards,
> and tries to read at ts=960, the key at 950 is not seen. From the perspective of the read, the result
> is hard to reason. For simplicity, we just do now allow decreasing full_history_ts_low for now.
>
During recovery, the value of `full_history_ts_low` is restored for each column family if applicable. Note that
version edits in the MANIFEST file for the same column family may have `full_history_ts_low` unsorted due
to the potential interleaving of `LogAndApply` calls. Only the max will be used to restore the state of the
column family.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7740
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D25296217
Pulled By: riversand963
fbshipit-source-id: 24acda1df8262cd7cfdc6ce7b0ec56438abe242a
Summary:
When a WAL is synced, an edit is written to MANIFEST.
After flushing memtables, the obsoleted WALs are piggybacked to MANIFEST while writing the new L0 files to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7601
Test Plan:
`track_and_verify_wals_in_manifest` is enabled by default for all tests extending `DBBasicTest`, and in db_stress_test.
Unit test `wal_edit_test`, `version_edit_test`, and `version_set_test` are also updated.
Watch all tests to pass.
Reviewed By: ltamasi
Differential Revision: D24553957
Pulled By: cheng-chang
fbshipit-source-id: 66a569ff1bdced38e22900bd240b73113906e040
Summary:
This PR makes it able to `LogAndApply` `VersionEdit`s related to WALs, and also be able to `Recover` from MANIFEST with WAL related `VersionEdit`s.
The `VersionEdit`s related to WAL are treated similarly as those related to column family operations, they are not applied to versions, but can be in a commit group. Mixing WAL related `VersionEdit`s with other types of edits will make logic in `ProcessManifestWrite` more complicated, so `VersionEdit`s related to WAL can either be WAL additions or deletions, like column family add and drop.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7256
Test Plan: a set of unit tests are added in `version_set_test.cc`
Reviewed By: riversand963
Differential Revision: D23123238
Pulled By: cheng-chang
fbshipit-source-id: 246be2ed4744fd03fa2738aba408aaa611d0379c
Summary:
There are some tricky behaviors related to WAL sync:
- When creating a WAL, the WAL might not be synced, if the WAL directory is not synced, the WAL file's metadata may not even be synced to disk, so during recovery, when listing the WAL directory, the WAL may not even show up.
- During each DB::Write, the WriteOption can control whether the WAL should be synced, so a WAL previously not synced on creation can be synced during Write.
For each `SyncWAL`, we'll track the synced status and the current WAL size. Previously, we only track the WAL size on closing.
During recovery, we check that the on-disk WAL size is >= the last synced size.
So this PR introduces `synced_size` and `closed` to `WalMetadata` for the above design update.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7414
Test Plan:
- updated wal_edit_test
- updated version_edit_test
Reviewed By: riversand963
Differential Revision: D23796127
Pulled By: cheng-chang
fbshipit-source-id: 5498ab80f537c48a10157e71a4745716aef5cf30
Summary:
`WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`.
`WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size).
`WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery).
`WalSet` is the set of alive WALs kept in `VersionSet`.
1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs
On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber.
But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk.
We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST.
In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs.
2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo`
`VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`.
But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s.
Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references.
So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164
Test Plan:
make version_edit_test && ./version_edit_test
make wal_edit_test && ./wal_edit_test
Reviewed By: ltamasi
Differential Revision: D22677936
Pulled By: cheng-chang
fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
Summary:
Each time RocksDB switches to a new MANIFEST file from old one, it calls WriteCurrentStateToManifest() which writes a 'snapshot' of the current in-memory state of versions to the beginning of the new manifest as a bunch of version edits. We can distinguish these version edits from other version edits written during normal operations with a custom, safe-to-ignore tag.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6530
Test Plan: added test to version_edit_test, pass make asan_check
Reviewed By: riversand963
Differential Revision: D20524516
Pulled By: zhichao-cao
fbshipit-source-id: f1de102f5499bfa88dae3caa2f32c7f42cf904db
Summary:
It's never too soon to refactor something. The patch splits the recently
introduced (`VersionEdit` related) `BlobFileState` into two classes
`BlobFileAddition` and `BlobFileGarbage`. The idea is that once blob files
are closed, they are immutable, and the only thing that changes is the
amount of garbage in them. In the new design, `BlobFileAddition` contains
the immutable attributes (currently, the count and total size of all blobs, checksum
method, and checksum value), while `BlobFileGarbage` contains the mutable
GC-related information elements (count and total size of garbage blobs). This is a
better fit for the GC logic and is more consistent with how SST files are handled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6502
Test Plan: `make check`
Differential Revision: D20348352
Pulled By: ltamasi
fbshipit-source-id: ff93f0121e80ab15e0e0a6525ba0d6af16a0e008
Summary:
BlobDB currently does not keep track of blob files: no records are written to
the manifest when a blob file is added or removed, and upon opening a database,
the list of blob files is populated simply based on the contents of the blob directory.
This means that lost blob files cannot be detected at the moment. We plan to solve
this issue by making blob files a part of `Version`; as a first step, this patch makes
it possible to store information about blob files in `VersionEdit`. Currently, this information
includes blob file number, total number and size of all blobs, and total number and size
of garbage blobs. However, the format is extensible: new fields can be added in
both a forward compatible and a forward incompatible manner if needed (similarly
to `kNewFile4`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6416
Test Plan: `make check`
Differential Revision: D19894234
Pulled By: ltamasi
fbshipit-source-id: f9753e1f2aedf6dadb70c09b345207cb9c58c329
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.
Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string). A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216
Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.
Differential Revision: D19171461
Pulled By: zhichao-cao
fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
Summary:
This is a bunch of small improvements to `VersionEdit`. Namely, the patch
* Makes the names and order of variables, methods, and code chunks related
to the various information elements more consistent, and adds missing
getters for the sake of completeness.
* Initializes previously uninitialized stack variables.
* Marks all getters const to improve const correctness.
* Adds in-class initializers and removes the default ctor that would
create an object with uninitialized built-in fields and call `Clear`
afterwards.
* Adds a new type alias for new files and changes the existing `typedef`
for deleted files into a type alias as well.
* Makes the helper method `DecodeNewFile4From` private.
* Switches from long-winded iterator syntax to range based loops in a
couple of places.
* Fixes a couple of assignments where an integer 0 was assigned to
boolean members.
* Fixes a getter which used to return a `const std::string` instead of
the intended `const std::string&`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6383
Test Plan: make check
Differential Revision: D19780537
Pulled By: ltamasi
fbshipit-source-id: b0b4f09fee0ec0e7c7b7a6d76bfe5346e91824d0
Summary:
options.periodic_compaction_seconds isn't supported when options.max_open_files != -1. It's because that the information of file creation time is stored in table properties and are not guaranteed to be loaded unless options.max_open_files = -1. Relax this constraint by storing the information in manifest.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6090
Test Plan: Pass all existing tests; Modify an existing test to force the manifest value to take 0 to simulate backward compatibility case; manually open the DB generated with the change by release 4.2.
Differential Revision: D18702268
fbshipit-source-id: 13e0bd94f546498a04f3dc5fc0d9dff5125ec9eb
Summary:
Previously, options.ttl cannot be set with options.max_open_files = -1, because it makes use of creation_time field in table properties, which is not available unless max_open_files = -1. With this commit, the information will be stored in manifest and when it is available, will be used instead.
Note that, this change will break forward compatibility for release 5.1 and older.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6060
Test Plan: Extend existing test case to options.max_open_files != -1, and simulate backward compatility in one test case by forcing the value to be 0.
Differential Revision: D18631623
fbshipit-source-id: 30c232a8672de5432ce9608bb2488ecc19138830
Summary:
This is groundwork for adding garbage collection support to BlobDB. The
patch adds logic that keeps track of the oldest blob file referred to by
each SST file. The oldest blob file is identified during flush/
compaction (similarly to how the range of keys covered by the SST is
identified), and persisted in the manifest as a custom field of the new
file edit record. Blob indexes with TTL are ignored for the purposes of
identifying the oldest blob file (since such blob files are cleaned up by the
TTL logic in BlobDB).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5903
Test Plan:
Added new unit tests; also ran db_bench in BlobDB mode, inspected the
manifest using ldb, and confirmed (by scanning the SST files using
sst_dump) that the value of the oldest blob file number field matches
the contents of the file for each SST.
Differential Revision: D17859997
Pulled By: ltamasi
fbshipit-source-id: 21662c137c6259a6af70446faaf3a9912c550e90
Summary:
Each DB has a globally unique ID. A DB can be physically copied around, or backed-up and restored, and the users should be identify the same DB. This unique ID right now is stored as plain text in file IDENTITY under the DB directory. This approach introduces at least two problems: (1) the file is not checksumed; (2) the source of truth of a DB is the manifest file, which can be copied separately from IDENTITY file, causing the DB ID to be wrong.
The goal of this PR is solve this problem by moving the DB ID to manifest. To begin with we will write to both identity file and manifest. Write to Manifest is controlled via the flag write_dbid_to_manifest in Options and default is false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5725
Test Plan: Added unit tests.
Differential Revision: D16963840
Pulled By: vjnadimpalli
fbshipit-source-id: 8a86a4c8c82c716003c40fd6b9d2d758030d92e9
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
During recovery, RocksDB is able to handle version edits that belong to group commits.
This PR is a subset of [PR 3752](https://github.com/facebook/rocksdb/pull/3752)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3945
Differential Revision: D8529122
Pulled By: riversand963
fbshipit-source-id: 57cb0f9cc55ecca684a837742d6626dc9c07f37e
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
Summary:
This reverts commit 73f21a7b21.
It breaks compatibility. When created a DB using a build with this new change, opening the DB and reading the data will fail with this error:
"Corruption: Can't access /000000.sst: IO error: while stat a file for size: /tmp/xxxx/000000.sst: No such file or directory"
This is because the dummy AddFile4 entry generated by the new code will be treated as a real entry by an older build. The older build will think there is a real file with number 0, but there isn't such a file.
Closes https://github.com/facebook/rocksdb/pull/3762
Differential Revision: D7730035
Pulled By: siying
fbshipit-source-id: f2051859eff20ef1837575ecb1e1bb96b3751e77
Summary:
This patch record the deleted WAL numbers in the manifest to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Closes https://github.com/facebook/rocksdb/pull/3488
Differential Revision: D6967893
Pulled By: maysamyabandeh
fbshipit-source-id: 13119feb155a08ab6d4909f437c7a750480dc8a1
Summary: With this commit, we add a new format in manifest when adding a new file. Now path ID and need-compaction hint are first two customized fields.
Test Plan: Add a test case in version_edit_test to verify the encoding and decoding logic. Add a unit test in db_test to verify need compaction is persistent after DB restarting.
Reviewers: kradhakrishnan, anthony, IslamAbdelRahman, yhchiang, rven, igor
Reviewed By: igor
Subscribers: javigon, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48123
Summary:
It is experimental. Allow users to return from a call back function TablePropertiesCollector::NeedCompact(), based on the data in the file.
It can be used to allow users to suggest DB to clear up delete tombstones faster.
Test Plan: Add a unit test.
Reviewers: igor, yhchiang, kradhakrishnan, rven
Reviewed By: rven
Subscribers: yoshinorim, MarkCallaghan, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39585
Summary:
Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different.
In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest.
There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides.
```lang=bash
% cat ~/transform
#!/bin/sh
files=$(git ls-files '*test\.cc')
for file in $files
do
if grep -q "rocksdb::test::RunAllTests()" $file
then
if grep -Eq '^class \w+Test {' $file
then
perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file
perl -pi -e 's/^(TEST)/${1}_F/g' $file
fi
perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file
perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file
fi
done
% sh ~/transform
% make format
```
Second iteration of this diff contains only scripted changes.
Third iteration contains manual changes to fix last errors and make it compilable.
Test Plan:
Build and notice no errors.
```lang=bash
% USE_CLANG=1 make check -j55
```
Tests are still testing.
Reviewers: meyering, sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35157
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary:
This diff has two fixes.
1. Fix the bug where compaction does not fail when RocksDB can't create a new file.
2. When NewWritableFiles() fails in OpenCompactionOutputFiles(), previously such fail-to-created file will be still be included as a compaction output. This patch also fixes this bug.
3. Allow VersionEdit::EncodeTo() to return Status and add basic check.
Test Plan:
./version_edit_test
export ROCKSDB_TESTS=FileCreationRandomFailure
./db_test
Reviewers: ljin, sdong, nkg-, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D25581
Summary:
In this patch, we allow RocksDB to support multiple DB paths internally.
No user interface is supported yet so this patch is silent to users.
Test Plan: make all check
Reviewers: igor, haobo, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18921
Summary:
Column family IDs should be unique, even if column family is dropped. To achieve this, we save max column family in manifest.
Note that the diff is still not ready. I'm only using differential to move the patch to my Mac machine.
Test Plan: added a test to column_family_test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16581
Summary: The only thing we do with compaction pointers is set them to some values, we never actually read them. I don't know what we used them for, but it doesn't look like we use them anymore.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15225
Yu Zhang