mirror of https://github.com/facebook/rocksdb.git
915 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Yu Zhang
|
9883b5f497 |
Fix manifest_number_ point to invalid file (#12882)
Summary: This PR fix `VersionSet`'s `manifest_number_` could be pointing to an invalid number intermediately. This happens when a new manifest roll is attempted but fast failed after loading table handlers and before the new manifest file creation/writing is actually attempted. In theory, a later manifest roll effort will overthrow this intermediate invalid in memory state. There is on harm when the DB crashes in this invalid state either. But efforts that takes a file snapshot of the DB like backup will incorrectly try to copy a non existing manifest file. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12882 Reviewed By: cbi42 Differential Revision: D60204956 Pulled By: jowlyzhang fbshipit-source-id: effbdb124b582f879d114988af06ac63867fc549 |
|
|
anand76
|
0fca5e31b4 |
Fix race between manifest error recovery and file ingestion (#12871)
Summary: This PR fixes an assertion failure in `DBImpl::ResumeImpl` - `assert(!versions_->descriptor_log_)`. In `VersionSet`, `descriptor_log_` has a pointer to the current MANIFEST writer. When there's an error updating the manifest, `descriptor_log_` is reset, and the error recovery thread checks `io_status()` in `VersionSet` and attempts to write a new MANIFEST. If another DB manipulation happens at the same time (like external file ingestion, column family manipulation etc), it calls `LogAndApply`, which also attempts to write a new MANIFEST. The assertion in `ResumeImpl` might fail in this case since the other MANIFEST writer may have updated `descriptor_log_`. To prevent the assertion, this fix updates both `io_status_` and `descriptor_log_` while holding the DB mutex. The other option would have been to simply remove the assert. But I think its important to have it to ensure the invariant that `io_status_` is cleared if the MANIFEST is written successfully, and this fix makes things easier to reason about. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12871 Test Plan: Existing tests and crash test Reviewed By: hx235 Differential Revision: D59926947 Pulled By: anand1976 fbshipit-source-id: af9ad18da3e29fc62c7ec2e30e0738aa33d4e5f1 |
|
|
anand76
|
5aa675457e |
Fix unhandled MANIFEST write errors (#12865)
Summary: The failure of `WriteCurrentStateToManifest()` in `VersionSet::ProcessManifestWrites()` was not handled properly. If it failed, `manifest_io_status` was not updated, leading to `manifest_file_number_` being updated to the newly created manifest even though its bad. This would lead to the bad manifest immediately getting deleted, and also the good manifest (referenced by `CURRENT`) getting deleted by obsolete file deletion because of `manifest_file_number_` not referencing its number. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12865 Reviewed By: hx235 Differential Revision: D59782940 Pulled By: anand1976 fbshipit-source-id: f752fb9a1c23fd3d734616e273613cbac204301b |
|
|
WangQian
|
755010f8d3 |
Fix the bug with using the user comparator to compare prefix. (#12862)
Summary: Fixes https://github.com/facebook/rocksdb/issues/12855 Pull Request resolved: https://github.com/facebook/rocksdb/pull/12862 Reviewed By: cbi42 Differential Revision: D59771651 Pulled By: jowlyzhang fbshipit-source-id: ffe0025143f51f9ce1b46900c3fef6a20eb34f4a |
|
|
Peter Dillinger
|
39455974cb |
Fix possible double-free on TruncatedRangeDelIterator (#12805)
Summary: Not sure where or how it happens, but using a recent CircleCI failure I got a reliable db_stress reproducer. Using std::unique_ptr appropriately for managing them has apparently (and unsurprisingly) fixed the problem without needing to know exactly where the problem was. Suggested follow-up: * Three or even four levels of pointers is very confusing to work with. Surely this part can be cleaned up to be simpler. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12805 Test Plan: Reproducer passes, plus ASAN test and crash test runs. I don't think it's worth the extra work to track down the details and create a careful unit test. ``` ./db_stress --WAL_size_limit_MB=1 --WAL_ttl_seconds=60 --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --adm_policy=2 --advise_random_on_open=1 --allow_data_in_errors=True --allow_fallocate=1 --async_io=0 --auto_readahead_size=1 --avoid_flush_during_recovery=0 --avoid_flush_during_shutdown=1 --avoid_unnecessary_blocking_io=1 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=0 --bgerror_resume_retry_interval=1000000 --block_align=1 --block_protection_bytes_per_key=4 --block_size=16384 --bloom_before_level=2147483646 --bloom_bits=15 --bottommost_compression_type=none --bottommost_file_compaction_delay=3600 --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_index_and_filter_blocks_with_high_priority=0 --cache_size=33554432 --cache_type=tiered_lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=0 --check_multiget_consistency=1 --check_multiget_entity_consistency=1 --checkpoint_one_in=10000 --checksum_type=kxxHash --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000 --compaction_pri=0 --compaction_readahead_size=0 --compaction_ttl=0 --compress_format_version=2 --compressed_secondary_cache_ratio=0.2 --compressed_secondary_cache_size=0 --compression_checksum=0 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=none --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --daily_offpeak_time_utc= --data_block_index_type=0 --db=/dev/shm/rocksdb.gpxs/rocksdb_crashtest_blackbox --db_write_buffer_size=0 --default_temperature=kWarm --default_write_temperature=kCold --delete_obsolete_files_period_micros=21600000000 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_file_deletions_one_in=10000 --disable_manual_compaction_one_in=1000000 --disable_wal=0 --dump_malloc_stats=1 --enable_checksum_handoff=1 --enable_compaction_filter=0 --enable_custom_split_merge=0 --enable_do_not_compress_roles=0 --enable_index_compression=0 --enable_memtable_insert_with_hint_prefix_extractor=0 --enable_pipelined_write=1 --enable_sst_partitioner_factory=0 --enable_thread_tracking=1 --enable_write_thread_adaptive_yield=0 --error_recovery_with_no_fault_injection=0 --expected_values_dir=/dev/shm/rocksdb.gpxs/rocksdb_crashtest_expected --fail_if_options_file_error=0 --fifo_allow_compaction=0 --file_checksum_impl=none --fill_cache=1 --flush_one_in=1000000 --format_version=3 --get_all_column_family_metadata_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_apis_one_in=10000 --get_properties_of_all_tables_one_in=100000 --get_property_one_in=100000 --get_sorted_wal_files_one_in=0 --hard_pending_compaction_bytes_limit=274877906944 --high_pri_pool_ratio=0 --index_block_restart_interval=4 --index_shortening=0 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --inplace_update_support=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --key_may_exist_one_in=100 --last_level_temperature=kHot --level_compaction_dynamic_level_bytes=0 --lock_wal_one_in=1000000 --log_file_time_to_roll=0 --log_readahead_size=0 --long_running_snapshots=1 --low_pri_pool_ratio=0 --lowest_used_cache_tier=2 --manifest_preallocation_size=5120 --manual_wal_flush_one_in=1000 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=16384 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=2500000 --max_key_len=3 --max_log_file_size=0 --max_manifest_file_size=1073741824 --max_sequential_skip_in_iterations=1 --max_total_wal_size=0 --max_write_batch_group_size_bytes=16 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_insert_hint_per_batch=1 --memtable_max_range_deletions=100 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=4 --memtable_whole_key_filtering=0 --memtablerep=skip_list --metadata_charge_policy=0 --metadata_read_fault_one_in=32 --metadata_write_fault_one_in=0 --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=100 --open_metadata_read_fault_one_in=0 --open_metadata_write_fault_one_in=8 --open_read_fault_one_in=0 --open_write_fault_one_in=16 --ops_per_thread=100000000 --optimize_filters_for_hits=1 --optimize_filters_for_memory=0 --optimize_multiget_for_io=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=1 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=1 --preserve_internal_time_seconds=60 --progress_reports=0 --promote_l0_one_in=0 --read_amp_bytes_per_bit=0 --read_fault_one_in=32 --readahead_size=524288 --readpercent=50 --recycle_log_file_num=1 --reopen=0 --report_bg_io_stats=1 --reset_stats_one_in=10000 --sample_for_compression=5 --secondary_cache_fault_one_in=32 --secondary_cache_uri= --set_options_one_in=10000 --skip_stats_update_on_db_open=0 --snapshot_hold_ops=100000 --soft_pending_compaction_bytes_limit=68719476736 --sqfc_name=bar --sqfc_version=1 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=0 --stats_history_buffer_size=1048576 --strict_bytes_per_sync=1 --subcompactions=3 --sync=0 --sync_fault_injection=1 --table_cache_numshardbits=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --test_cf_consistency=1 --top_level_index_pinning=1 --uncache_aggressiveness=5 --universal_max_read_amp=-1 --unpartitioned_pinning=2 --use_adaptive_mutex=0 --use_adaptive_mutex_lru=0 --use_attribute_group=1 --use_delta_encoding=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=0 --use_multi_cf_iterator=0 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=1 --use_sqfc_for_range_queries=1 --use_timed_put_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_compression=1 --verify_db_one_in=100000 --verify_file_checksums_one_in=0 --verify_iterator_with_expected_state_one_in=0 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=none --write_buffer_size=1048576 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=35 ``` Reviewed By: cbi42 Differential Revision: D58958390 Pulled By: pdillinger fbshipit-source-id: 1271cfdcc3c574f78cd59f3c68148f7ed4a19c47 |
|
|
Peter Dillinger
|
21eb82ebec |
Disable "uncache" behavior in DB shutdown (#12751)
Summary: Crash test showed a potential use-after-free where a file marked as obsolete and eligible for uncache on destruction is destroyed in the VersionSet destructor, which only happens as part of DB shutdown. At that point, the in-memory column families have already been destroyed, so attempting to uncache could use-after-free on stuff like getting the `user_comparator()` from the `internal_comparator()`. I attempted to make it smarter, but wasn't able to untangle the destruction dependencies in a way that was safe, understandable, and maintainable. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12751 Test Plan: Reproduced by adding uncache_aggressiveness to an existing (but otherwise unrelated) test. This makes it a fair regression test. Also added testing to ensure that trivial moves and DB close & reopen are well behaved with uncache_aggressiveness. Specifically, this issue doesn't seem to be because things are uncached inappropriately in those cases. Reviewed By: ltamasi Differential Revision: D58390058 Pulled By: pdillinger fbshipit-source-id: 66ac9cb13bf02638fa80ee5b7218153d8bc7cfd3 |
|
|
Peter Dillinger
|
b34cef57b7 |
Support pro-actively erasing obsolete block cache entries (#12694)
Summary: Currently, when files become obsolete, the block cache entries associated with them just age out naturally. With pure LRU, this is not too bad, as once you "use" enough cache entries to (re-)fill the cache, you are guranteed to have purged the obsolete entries. However, HyperClockCache is a counting clock cache with a somewhat longer memory, so could be more negatively impacted by previously-hot cache entries becoming obsolete, and taking longer to age out than newer single-hit entries. Part of the reason we still have this natural aging-out is that there's almost no connection between block cache entries and the file they are associated with. Everything is hashed into the same pool(s) of entries with nothing like a secondary index based on file. Keeping track of such an index could be expensive. This change adds a new, mutable CF option `uncache_aggressiveness` for erasing obsolete block cache entries. The process can be speculative, lossy, or unproductive because not all potential block cache entries associated with files will be resident in memory, and attempting to remove them all could be wasted CPU time. Rather than a simple on/off switch, `uncache_aggressiveness` basically tells RocksDB how much CPU you're willing to burn trying to purge obsolete block cache entries. When such efforts are not sufficiently productive for a file, we stop and move on. The option is in ColumnFamilyOptions so that it is dynamically changeable for already-open files, and customizeable by CF. Note that this block cache removal happens as part of the process of purging obsolete files, which is often in a background thread (depending on `background_purge_on_iterator_cleanup` and `avoid_unnecessary_blocking_io` options) rather than along CPU critical paths. Notable auxiliary code details: * Possibly fixing some issues with trivial moves with `only_delete_metadata`: unnecessary TableCache::Evict in that case and missing from the ObsoleteFileInfo move operator. (Not able to reproduce an current failure.) * Remove suspicious TableCache::Erase() from VersionSet::AddObsoleteBlobFile() (TODO follow-up item) Marked EXPERIMENTAL until more thorough validation is complete. Direct stats of this functionality are omitted because they could be misleading. Block cache hit rate is a better indicator of benefit, and CPU profiling a better indicator of cost. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12694 Test Plan: * Unit tests added, including refactoring an existing test to make better use of parameterized tests. * Added to crash test. * Performance, sample command: ``` for I in `seq 1 10`; do for UA in 300; do for CT in lru_cache fixed_hyper_clock_cache auto_hyper_clock_cache; do rm -rf /dev/shm/test3; TEST_TMPDIR=/dev/shm/test3 /usr/bin/time ./db_bench -benchmarks=readwhilewriting -num=13000000 -read_random_exp_range=6 -write_buffer_size=10000000 -bloom_bits=10 -cache_type=$CT -cache_size=390000000 -cache_index_and_filter_blocks=1 -disable_wal=1 -duration=60 -statistics -uncache_aggressiveness=$UA 2>&1 | grep -E 'micros/op|rocksdb.block.cache.data.(hit|miss)|rocksdb.number.keys.(read|written)|maxresident' | awk '/rocksdb.block.cache.data.miss/ { miss = $4 } /rocksdb.block.cache.data.hit/ { hit = $4 } { print } END { print "hit rate = " ((hit * 1.0) / (miss + hit)) }' | tee -a results-$CT-$UA; done; done; done ``` Averaging 10 runs each case, block cache data block hit rates ``` lru_cache UA=0 -> hit rate = 0.327, ops/s = 87668, user CPU sec = 139.0 UA=300 -> hit rate = 0.336, ops/s = 87960, user CPU sec = 139.0 fixed_hyper_clock_cache UA=0 -> hit rate = 0.336, ops/s = 100069, user CPU sec = 139.9 UA=300 -> hit rate = 0.343, ops/s = 100104, user CPU sec = 140.2 auto_hyper_clock_cache UA=0 -> hit rate = 0.336, ops/s = 97580, user CPU sec = 140.5 UA=300 -> hit rate = 0.345, ops/s = 97972, user CPU sec = 139.8 ``` Conclusion: up to roughly 1 percentage point of improved block cache hit rate, likely leading to overall improved efficiency (because the foreground CPU cost of cache misses likely outweighs the background CPU cost of erasure, let alone I/O savings). Reviewed By: ajkr Differential Revision: D57932442 Pulled By: pdillinger fbshipit-source-id: 84a243ca5f965f731f346a4853009780a904af6c |
|
|
Changyu Bi
|
fecb10c2fa |
Improve universal compaction sorted-run trigger (#12477)
Summary: Universal compaction currently uses `level0_file_num_compaction_trigger` for two purposes: 1. the trigger for checking if there is any compaction to do, and 2. the limit on the number of sorted runs. RocksDB will do compaction to keep the number of sorted runs no more than the value of this option. This can make the option inflexible. A value that is too small causes higher write amp: more compactions to reduce the number of sorted runs. A value that is too big delays potential compaction work and causes worse read performance. This PR introduce an option `CompactionOptionsUniversal::max_read_amp` for only the second purpose: to specify the hard limit on the number of sorted runs. For backward compatibility, `max_read_amp = -1` by default, which means to fallback to the current behavior. When `max_read_amp > 0`,`level0_file_num_compaction_trigger` will only serve as a trigger to find potential compaction. When `max_read_amp = 0`, RocksDB will auto-tune the limit on the number of sorted runs. The estimation is based on DB size, write_buffer_size and size_ratio, so it is adaptive to the size change of the DB. See more in `UniversalCompactionBuilder::PickCompaction()`. Alternatively, users now can configure `max_read_amp` to a very big value and keep `level0_file_num_compaction_trigger` small. This will allow `size_ratio` and `max_size_amplification_percent` to control the number of sorted runs. This essentially disables compactions with reason kUniversalSortedRunNum. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12477 Test Plan: * new unit test * existing unit test for default behavior * updated crash test with the new option * benchmark: * Create a DB that is roughly 24GB in the last level. When `max_read_amp = 0`, we estimate that the DB needs 9 levels to avoid excessive compactions to reduce the number of sorted runs. * We then run fillrandom to ingest another 24GB data to compare write amp. * case 1: small level0 trigger: `level0_file_num_compaction_trigger=5, max_read_amp=-1` * write-amp: 4.8 * case 2: auto-tune: `level0_file_num_compaction_trigger=5, max_read_amp=0` * write-amp: 3.6 * case 3: auto-tune with minimal trigger: `level0_file_num_compaction_trigger=1, max_read_amp=0` * write-amp: 3.8 * case 4: hard-code a good value for trigger: `level0_file_num_compaction_trigger=9` * write-amp: 2.8 ``` Case 1: ** Compaction Stats [default] ** Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 0/0 0.00 KB 1.0 0.0 0.0 0.0 22.6 22.6 0.0 1.0 0.0 163.2 141.94 111.10 108 1.314 0 0 0.0 0.0 L45 8/0 1.81 GB 0.0 39.6 11.1 28.5 39.3 10.8 0.0 3.5 209.0 207.3 194.25 191.29 43 4.517 348M 2498K 0.0 0.0 L46 13/0 3.12 GB 0.0 15.3 9.5 5.8 15.0 9.3 0.0 1.6 203.1 199.3 77.13 75.88 16 4.821 134M 2362K 0.0 0.0 L47 19/0 4.68 GB 0.0 15.4 10.5 4.9 14.7 9.8 0.0 1.4 204.0 194.9 77.38 76.15 8 9.673 135M 5920K 0.0 0.0 L48 38/0 9.42 GB 0.0 19.6 11.7 7.9 17.3 9.4 0.0 1.5 206.5 182.3 97.15 95.02 4 24.287 172M 20M 0.0 0.0 L49 91/0 22.70 GB 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.00 0.00 0 0.000 0 0 0.0 0.0 Sum 169/0 41.74 GB 0.0 89.9 42.9 47.0 109.0 61.9 0.0 4.8 156.7 189.8 587.85 549.45 179 3.284 791M 31M 0.0 0.0 Case 2: ** Compaction Stats [default] ** Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 1/0 214.47 MB 1.2 0.0 0.0 0.0 22.6 22.6 0.0 1.0 0.0 164.5 140.81 109.98 108 1.304 0 0 0.0 0.0 L44 0/0 0.00 KB 0.0 1.3 1.3 0.0 1.2 1.2 0.0 1.0 206.1 204.9 6.24 5.98 3 2.081 11M 51K 0.0 0.0 L45 4/0 844.36 MB 0.0 7.1 5.4 1.7 7.0 5.4 0.0 1.3 194.6 192.9 37.41 36.00 13 2.878 62M 489K 0.0 0.0 L46 11/0 2.57 GB 0.0 14.6 9.8 4.8 14.3 9.5 0.0 1.5 193.7 189.8 77.09 73.54 17 4.535 128M 2411K 0.0 0.0 L47 24/0 5.81 GB 0.0 19.8 12.0 7.8 18.8 11.0 0.0 1.6 191.4 181.1 106.19 101.21 9 11.799 174M 9166K 0.0 0.0 L48 38/0 9.42 GB 0.0 19.6 11.8 7.9 17.3 9.4 0.0 1.5 197.3 173.6 101.97 97.23 4 25.491 172M 20M 0.0 0.0 L49 91/0 22.70 GB 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.00 0.00 0 0.000 0 0 0.0 0.0 Sum 169/0 41.54 GB 0.0 62.4 40.3 22.1 81.3 59.2 0.0 3.6 136.1 177.2 469.71 423.94 154 3.050 549M 32M 0.0 0.0 Case 3: ** Compaction Stats [default] ** Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 0/0 0.00 KB 5.0 0.0 0.0 0.0 22.6 22.6 0.0 1.0 0.0 163.8 141.43 111.13 108 1.310 0 0 0.0 0.0 L44 0/0 0.00 KB 0.0 0.8 0.8 0.0 0.8 0.8 0.0 1.0 201.4 200.2 4.26 4.19 2 2.130 7360K 33K 0.0 0.0 L45 4/0 844.38 MB 0.0 6.3 5.0 1.2 6.2 5.0 0.0 1.2 202.0 200.3 31.81 31.50 12 2.651 55M 403K 0.0 0.0 L46 7/0 1.62 GB 0.0 13.3 8.8 4.6 13.1 8.6 0.0 1.5 198.9 195.7 68.72 67.89 17 4.042 117M 1696K 0.0 0.0 L47 24/0 5.81 GB 0.0 21.7 12.9 8.8 20.6 11.8 0.0 1.6 198.5 188.6 112.04 109.97 12 9.336 191M 9352K 0.0 0.0 L48 41/0 10.14 GB 0.0 24.8 13.0 11.8 21.9 10.1 0.0 1.7 198.6 175.6 127.88 125.36 6 21.313 218M 25M 0.0 0.0 L49 91/0 22.70 GB 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.00 0.00 0 0.000 0 0 0.0 0.0 Sum 167/0 41.10 GB 0.0 67.0 40.5 26.4 85.4 58.9 0.0 3.8 141.1 179.8 486.13 450.04 157 3.096 589M 36M 0.0 0.0 Case 4: ** Compaction Stats [default] ** Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 0/0 0.00 KB 0.7 0.0 0.0 0.0 22.6 22.6 0.0 1.0 0.0 158.6 146.02 114.68 108 1.352 0 0 0.0 0.0 L42 0/0 0.00 KB 0.0 1.7 1.7 0.0 1.7 1.7 0.0 1.0 185.4 184.3 9.25 8.96 4 2.314 14M 67K 0.0 0.0 L43 0/0 0.00 KB 0.0 2.5 2.5 0.0 2.5 2.5 0.0 1.0 197.8 195.6 13.01 12.65 4 3.253 22M 202K 0.0 0.0 L44 4/0 844.40 MB 0.0 4.2 4.2 0.0 4.1 4.1 0.0 1.0 188.1 185.1 22.81 21.89 5 4.562 36M 503K 0.0 0.0 L45 13/0 3.12 GB 0.0 7.5 6.5 1.0 7.2 6.2 0.0 1.1 188.7 181.8 40.69 39.32 5 8.138 65M 2282K 0.0 0.0 L46 17/0 4.18 GB 0.0 8.3 7.1 1.2 7.9 6.6 0.0 1.1 192.2 181.8 44.23 43.06 4 11.058 73M 3846K 0.0 0.0 L47 22/0 5.34 GB 0.0 8.9 7.5 1.4 8.2 6.8 0.0 1.1 189.1 174.1 48.12 45.37 3 16.041 78M 6098K 0.0 0.0 L48 27/0 6.58 GB 0.0 9.2 7.6 1.6 8.2 6.6 0.0 1.1 195.2 172.9 48.52 47.11 2 24.262 81M 9217K 0.0 0.0 L49 91/0 22.70 GB 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.00 0.00 0 0.000 0 0 0.0 0.0 Sum 174/0 42.74 GB 0.0 42.3 37.0 5.3 62.4 57.1 0.0 2.8 116.3 171.3 372.66 333.04 135 2.760 372M 22M 0.0 0.0 setup: ./db_bench --benchmarks=fillseq,compactall,waitforcompaction --num=200000000 --compression_type=none --disable_wal=1 --compaction_style=1 --num_levels=50 --target_file_size_base=268435456 --max_compaction_bytes=6710886400 --level0_file_num_compaction_trigger=10 --write_buffer_size=268435456 --seed 1708494134896523 benchmark: ./db_bench --benchmarks=overwrite,waitforcompaction,stats --num=200000000 --compression_type=none --disable_wal=1 --compaction_style=1 --write_buffer_size=268435456 --level0_file_num_compaction_trigger=5 --target_file_size_base=268435456 --use_existing_db=1 --num_levels=50 --writes=200000000 --universal_max_read_amp=-1 --seed=1716488324800233 ``` Reviewed By: ajkr Differential Revision: D55370922 Pulled By: cbi42 fbshipit-source-id: 9be69979126b840d08e93e7059260e76a878bb2a |
|
|
anand76
|
0ed93552f4 |
Implement obsolete file deletion (GC) in follower (#12657)
Summary: This PR implements deletion of obsolete files in a follower RocksDB instance. The follower tails the leader's MANIFEST and creates links to newly added SST files. These links need to be deleted once those files become obsolete in order to reclaim space. There are three cases to be considered - 1. New files added and links created, but the Version could not be installed due to some missing files. Those links need to be preserved so a subsequent catch up attempt can succeed. We insert the next file number in the `VersionSet` to `pending_outputs_` to prevent their deletion. 2. Files deleted from the previous successfully installed `Version`. These are deleted as usual in `PurgeObsoleteFiles`. 3. New files added by a `VersionEdit` and deleted by a subsequent `VersionEdit`, both processed in the same catchup attempt. Links will be created for the new files when verifying a candidate `Version`. Those need to be deleted explicitly as they're never added to `VersionStorageInfo`, and thus not deleted by `PurgeObsoleteFiles`. Test plan - New unit tests in `db_follower_test`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12657 Reviewed By: jowlyzhang Differential Revision: D57462697 Pulled By: anand1976 fbshipit-source-id: 898f15570638dd4930f839ffd31c560f9cb73916 |
|
|
Changyu Bi
|
6fdc4c5282 |
Fix a corruption bug in `CreateColumnFamilyWithImport()` (#12602)
Summary: when importing files from multiple CFs into a new CF, we were reusing the epoch numbers assigned by the original CFs. This means L0 files in the new CF can have the same epoch number (assigned originally by different CFs). While CreateColumnFamilyWithImport() requires each original CF to have disjoint key range, after an intra-l0 compaction, we still can end up with L0 files with the same epoch number but overlapping key range. This PR attempt to fix this by reassigning epoch numbers when importing multiple CFs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12602 Test Plan: a new repro unit test. Before this PR, it fails with ``` [ RUN ] ImportColumnFamilyTest.AssignEpochNumberToMultipleCF db/import_column_family_test.cc:1048: Failure db_->WaitForCompact(o) Corruption: force_consistency_checks(DEBUG): VersionBuilder: L0 files of same epoch number but overlapping range https://github.com/facebook/rocksdb/issues/44 , smallest key: '6B6579303030303030' seq:511, type:1 , largest key: '6B6579303031303239' seq:510, type:1 , epoch number: 3 vs. file https://github.com/facebook/rocksdb/issues/36 , smallest key: '6B6579303030313030' seq:401, type:1 , largest key: '6B6579303030313939' seq:500, type:1 , epoch number: 3 ``` Reviewed By: hx235 Differential Revision: D56851808 Pulled By: cbi42 fbshipit-source-id: 01b8c790c9f1f2a168047ead670e73633f705b84 |
|
|
Peter Dillinger
|
a178d15baf |
More checks around num_entries vs. num_deletions (#12600)
Summary: We've seen an internal crash test+sanitizer failure seemingly caused by underflow on `current_num_non_deletions_` which would happen if num_entries < num_deletions. (T186407810) This change adds an additional check (fail earlier?) and coerces read table properties to satisfy the invariant that is supposed to be provided by https://github.com/facebook/rocksdb/pull/4841 but could be violated by older files, due to https://github.com/facebook/rocksdb/pull/4016. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12600 Test Plan: existing tests Reviewed By: ajkr Differential Revision: D56796191 Pulled By: pdillinger fbshipit-source-id: 6d22cc40eb74974c42b311293ee2775c6af95afc |
|
|
Andrew Kryczka
|
b2931a5c53 |
Fixed `MultiGet()` error handling to not skip blob dereference (#12597)
Summary: See comment at top of the test case and release note. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12597 Reviewed By: jaykorean Differential Revision: D56718786 Pulled By: ajkr fbshipit-source-id: 8dce185bb0d24a358372fc2b553d181793fc335f |
|
|
anand76
|
97991960e9 |
Retry DB::Open upon a corruption detected while reading the MANIFEST (#12518)
Summary: This PR is a counterpart of https://github.com/facebook/rocksdb/issues/12427 . On file systems that support storage level data checksum and reconstruction, retry opening the DB if a corruption is detected when reading the MANIFEST. This could be done in `log::Reader`, but its a little complicated since the sequential file would have to be reopened in order to re-read the same data, and we may miss some subtle corruptions that don't result in checksum mismatch. The approach chosen here instead is to make the decision to retry in `DBImpl::Recover`, based on either an explicit corruption in the MANIFEST file, or missing SST files due to bad data in the MANIFEST. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12518 Reviewed By: ajkr Differential Revision: D55932155 Pulled By: anand1976 fbshipit-source-id: 51755a29b3eb14b9d8e98534adb2e7d54b12ced9 |
|
|
Jay Huh
|
02ea0d6367 |
Reserve vector in advance to avoid resizing in GetLiveFilesMetaData (#12554)
Summary: As title Pull Request resolved: https://github.com/facebook/rocksdb/pull/12554 Test Plan: Existing CI Reviewed By: ajkr Differential Revision: D56252201 Pulled By: jaykorean fbshipit-source-id: 06211555a54ce5e6bf656b81109022494e6787ea |
|
|
Peter Dillinger
|
b515a5db3f |
Replace ScopedArenaIterator with ScopedArenaPtr<InternalIterator> (#12470)
Summary: ScopedArenaIterator is not an iterator. It is a pointer wrapper. And we don't need a custom implemented pointer wrapper when std::unique_ptr can be instantiated with what we want. So this adds ScopedArenaPtr<T> to replace those uses. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12470 Test Plan: CI (including ASAN/UBSAN) Reviewed By: jowlyzhang Differential Revision: D55254362 Pulled By: pdillinger fbshipit-source-id: cc96a0b9840df99aa807f417725e120802c0ae18 |
|
|
Peter Dillinger
|
54cb9c77d9 |
Prefer static_cast in place of most reinterpret_cast (#12308)
Summary: The following are risks associated with pointer-to-pointer reinterpret_cast: * Can produce the "wrong result" (crash or memory corruption). IIRC, in theory this can happen for any up-cast or down-cast for a non-standard-layout type, though in practice would only happen for multiple inheritance cases (where the base class pointer might be "inside" the derived object). We don't use multiple inheritance a lot, but we do. * Can mask useful compiler errors upon code change, including converting between unrelated pointer types that you are expecting to be related, and converting between pointer and scalar types unintentionally. I can only think of some obscure cases where static_cast could be troublesome when it compiles as a replacement: * Going through `void*` could plausibly cause unnecessary or broken pointer arithmetic. Suppose we have `struct Derived: public Base1, public Base2`. If we have `Derived*` -> `void*` -> `Base2*` -> `Derived*` through reinterpret casts, this could plausibly work (though technical UB) assuming the `Base2*` is not dereferenced. Changing to static cast could introduce breaking pointer arithmetic. * Unnecessary (but safe) pointer arithmetic could arise in a case like `Derived*` -> `Base2*` -> `Derived*` where before the Base2 pointer might not have been dereferenced. This could potentially affect performance. With some light scripting, I tried replacing pointer-to-pointer reinterpret_casts with static_cast and kept the cases that still compile. Most occurrences of reinterpret_cast have successfully been changed (except for java/ and third-party/). 294 changed, 257 remain. A couple of related interventions included here: * Previously Cache::Handle was not actually derived from in the implementations and just used as a `void*` stand-in with reinterpret_cast. Now there is a relationship to allow static_cast. In theory, this could introduce pointer arithmetic (as described above) but is unlikely without multiple inheritance AND non-empty Cache::Handle. * Remove some unnecessary casts to void* as this is allowed to be implicit (for better or worse). Most of the remaining reinterpret_casts are for converting to/from raw bytes of objects. We could consider better idioms for these patterns in follow-up work. I wish there were a way to implement a template variant of static_cast that would only compile if no pointer arithmetic is generated, but best I can tell, this is not possible. AFAIK the best you could do is a dynamic check that the void* conversion after the static cast is unchanged. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12308 Test Plan: existing tests, CI Reviewed By: ltamasi Differential Revision: D53204947 Pulled By: pdillinger fbshipit-source-id: 9de23e618263b0d5b9820f4e15966876888a16e2 |
|
|
Yu Zhang
|
e3e8fbb497 |
Add a separate range classes for internal usage (#12071)
Summary: Introduce some different range classes `UserKeyRange` and `UserKeyRangePtr` to be used by internal implementation. The `Range` class is used in both public APIs like `DB::GetApproximateSizes`, `DB::GetApproximateMemTableStats`, `DB::GetPropertiesOfTablesInRange` etc and internal implementations like `ColumnFamilyData::RangesOverlapWithMemtables`, `VersionSet::GetPropertiesOfTablesInRange`. These APIs have different expectations of what keys this range class contain. Public API users are supposed to populate the range with the user keys without timestamp, in the same way that point lookup and range scan APIs' key input only expect the user key without timestamp. The internal APIs implementation expect a user key whose format is compatible with the user comparator, a.k.a a user key with the timestamp. This PR contains: 1) introducing counterpart range class `UserKeyRange` `UserKeyRangePtr` for internal implementation while leave the existing `Range` and `RangePtr` class only for public APIs. Internal implementations are updated to use this new class instead. 2) add user-defined timestamp support for `DB::GetPropertiesOfTablesInRange` API and `DeleteFilesInRanges` API. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12071 Test Plan: existing tests Added test for `DB::GetPropertiesOfTablesInRange` and `DeleteFilesInRanges` APIs for when user-defined timestamp is enabled. The change in external_file_ingestion_job doesn't have a user-defined timestamp enabled test case coverage, will add one in a follow up PR that adds file ingestion support for UDT. Reviewed By: ltamasi Differential Revision: D53292608 Pulled By: jowlyzhang fbshipit-source-id: 9a9279e23c640a6d8f8232636501a95aef7638b8 |
|
|
anand76
|
95b41eec6d |
Fix potential incorrect result for duplicate key in MultiGet (#12295)
Summary: The RocksDB correctness testing has recently discovered a possible, but very unlikely, correctness issue with MultiGet. The issue happens when all of the below conditions are met - 1. Duplicate keys in a MultiGet batch 2. Key matches the last key in a non-zero, non-bottommost level file 3. Final value is not in the file (merge operand, not snapshot visible etc) 4. Multiple entries exist for the key in the file spanning more than 1 data block. This can happen due to snapshots, which would force multiple versions of the key in the file, and they may spill over to another data block 5. Lookup attempt in the SST for the first of the duplicates fails with IO error on a data block (NOT the first data block, but the second or subsequent uncached block), but no errors for the other duplicates 6. Value or merge operand for the key is present in the very next level The problem is, in FilePickerMultiGet, when looking up keys in a level we use FileIndexer and the overlapping file in the current level to determine the search bounds for that key in the file list in the next level. If the next level is empty, the search bounds are reset and we do a full binary search in the next non-empty level's LevelFilesBrief. However, under the conditions https://github.com/facebook/rocksdb/issues/1 and https://github.com/facebook/rocksdb/issues/2 listed above, only the first of the duplicates has its next-level search bounds updated, and the remaining duplicates are skipped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12295 Test Plan: Add unit tests that fail an assertion or return wrong result without the fix Reviewed By: hx235 Differential Revision: D53187634 Pulled By: anand1976 fbshipit-source-id: a5eadf4fede9bbdec784cd993b15e3341436d1ea |
|
|
Andrew Kryczka
|
7fe93162c5 |
Log pending compaction bytes in a couple places (#12267)
Summary: This PR adds estimated pending compaction bytes in two places: - The "Level summary", which is printed to the info LOG after every flush or compaction - The "rocksdb.cfstats" property, which is printed to the info LOG periodically according to `stats_dump_period_sec` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12267 Test Plan: Ran `./db_bench -benchmarks=filluniquerandom -stats_dump_period_sec=1 -statistics=true -write_buffer_size=524288` and looked at the LOG. ``` ** Compaction Stats [default] ** ... Estimated pending compaction bytes: 12117691 ... 2024/01/22-13:15:12.283563 1572872 (Original Log Time 2024/01/22-13:15:12.283540) [/db_impl/db_impl_compaction_flush.cc:371] [default] Level summary: files[10 1 0 0 0 0 0] max score 0.50, estimated pending compaction bytes 12359137 ``` Reviewed By: cbi42 Differential Revision: D52973337 Pulled By: ajkr fbshipit-source-id: c4e546bd9bdac387eebeeba303d04125212037b8 |
|
|
anand76
|
65e162bf09 |
Add some asserts in FilePickerMultiGet for debugging (#12241)
Summary: Add asserts to help debug a crash test failure. The test fails as wollows - ```rocksdb::FilePickerMultiGet::PrepareNextLevel(): Assertion `fp_ctx.search_right_bound == -1 || fp_ctx.search_right_bound == FileIndexer::kLevelMaxIndex' failed``` Also add a unit test to verify an edge case. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12241 Reviewed By: cbi42 Differential Revision: D52819029 Pulled By: anand1976 fbshipit-source-id: 33316985c8ace1aed9ecc2400da8b777aec488ff |
|
|
Hui Xiao
|
06e593376c |
Group SST write in flush, compaction and db open with new stats (#11910)
Summary: ## Context/Summary Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity. For that, this PR does the following: - Tag different write IOs by passing down and converting WriteOptions to IOOptions - Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS Some related code refactory to make implementation cleaner: - Blob stats - Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info. - Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write. - Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority - Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification - Build table - TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables - Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder. This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more - Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority ## Test ### db bench Flush ``` ./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100 rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 ``` compaction, db oopen ``` Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279 rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213 rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66 ``` blob stats - just to make sure they aren't broken by this PR ``` Integrated Blob DB Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600 rocksdb.blobdb.blob.file.synced COUNT : 1 rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same) ``` ``` Stacked Blob DB Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876 rocksdb.blobdb.blob.file.synced COUNT : 8 rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same) ``` ### Rehearsal CI stress test Trigger 3 full runs of all our CI stress tests ### Performance Flush ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark; enable_statistics = true Pre-pr: avg 507515519.3 ns 497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908, Post-pr: avg 511971266.5 ns, regressed 0.88% 502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408, ``` Compaction ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 495346098.30 ns 492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846 Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97% 502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007 ``` Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats) ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 3848.10 ns 3814,3838,3839,3848,3854,3854,3854,3860,3860,3860 Post-pr: avg 3874.20 ns, regressed 0.68% 3863,3867,3871,3874,3875,3877,3877,3877,3880,3881 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910 Reviewed By: ajkr Differential Revision: D49788060 Pulled By: hx235 fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff |
|
|
anand76
|
a036525809 |
Lightweight verification of MANIFEST file after close on shutdown (#12174)
Summary: Do a size verification on the MANIFEST file during DB shutdown, after closing the file. If the verification fails, write a new MANIFEST file. In the future, we can do a more thorough verification if we want to. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12174 Test Plan: Unit test, and some manual verification Reviewed By: ajkr Differential Revision: D52451184 Pulled By: anand1976 fbshipit-source-id: fc3bc170e22f6c9a9c482ee5ff592abab889df83 |
|
|
Changyu Bi
|
3d81f175b4 |
Prioritize marked file in level compaction (#12187)
Summary: When ranking file by compaction priority in a level, prioritize files marked for compaction over files that are not marked. This only applies to default CompactPri kMinOverlappingRatio for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12187 Test Plan: * New unit tests Reviewed By: ajkr Differential Revision: D52437194 Pulled By: cbi42 fbshipit-source-id: 65ea9ce5bb421e598d539a55c8219b70844b82b3 |
|
|
Andrew Kryczka
|
d8e47620d7 |
Speedup based on pending compaction bytes relative to data size (#12130)
Summary: RocksDB self throttles per-DB compaction parallelism until it detects compaction pressure. The pressure detection based on pending compaction bytes was only comparing against the slowdown trigger (`soft_pending_compaction_bytes_limit`). Online services tend to set that extremely high to avoid stalling at all costs. Perhaps they should have set it to zero, but we never documented that zero disables stalling so I have been telling everyone to increase it for years. This PR adds pressure detection based on pending compaction bytes relative to the size of bottommost data. The size of bottommost data should be fairly stable and proportional to the logical data size Pull Request resolved: https://github.com/facebook/rocksdb/pull/12130 Reviewed By: hx235 Differential Revision: D52000746 Pulled By: ajkr fbshipit-source-id: 7e1fd170901a74c2d4a69266285e3edf6e7631c7 |
|
|
Levi Tamasi
|
0ebe1614cb |
Eliminate some code duplication in MergeHelper (#12121)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/12121 The patch eliminates some code duplication by unifying the two sets of `MergeHelper::TimedFullMerge` overloads using variadic templates. It also brings the order of parameters into sync when it comes to the various `TimedFullMerge*` methods. Reviewed By: jaykorean Differential Revision: D51862483 fbshipit-source-id: e3f832a6ff89ba34591451655cf11025d0a0d018 |
|
|
Yu Zhang
|
ba8fa0f546 |
internal_repo_rocksdb (4372117296613874540) (#12117)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/12117 Reviewed By: ajkr Differential Revision: D51745846 Pulled By: jowlyzhang fbshipit-source-id: 51c806a484b3b43d174b06d2cfe9499191d09914 |
|
|
Yu Zhang
|
509947ce2c |
Quarantine files in a limbo state after a manifest error (#12030)
Summary: Part of the procedures to handle manifest IO error is to disable file deletion in case some files in limbo state get deleted prematurely. This is not ideal because: 1) not all the VersionEdits whose commit encounter such an error contain updates for files, disabling file deletion sometimes are not necessary. 2) `EnableFileDeletion` has a force mode that could make other threads accidentally disrupt this procedure in recovery. 3) Disabling file deletion as a whole is also not as efficient as more precisely tracking impacted files from being prematurely deleted. This PR replaces this mechanism with tracking such files and quarantine them from being deleted in `ErrorHandler`. These are the types of files being actively tracked in quarantine in this PR: 1) new table files and blob files from a background job 2) old manifest file whose immediately following new manifest file's CURRENT file creation gets into unclear state. Current handling is not sufficient to make sure the old manifest file is kept in case it's needed. Note that WAL logs are not part of the quarantine because `min_log_number_to_keep` is a safe mechanism and it's only updated after successful manifest commits so it can prevent this premature deletion issue from happening. We track these files' file numbers because they share the same file number space. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12030 Test Plan: Modified existing unit tests Reviewed By: ajkr Differential Revision: D51036774 Pulled By: jowlyzhang fbshipit-source-id: 84ef26271fbbc888ef70da5c40fe843bd7038716 |
|
|
Jay Huh
|
2dab137182 |
Mark more files for periodic compaction during offpeak (#12031)
Summary: - The struct previously named `OffpeakTimeInfo` has been renamed to `OffpeakTimeOption` to indicate that it's a user-configurable option. Additionally, a new struct, `OffpeakTimeInfo`, has been introduced, which includes two fields: `is_now_offpeak` and `seconds_till_next_offpeak_start`. This change prevents the need to parse the `daily_offpeak_time_utc` string twice. - It's worth noting that we may consider adding more fields to the `OffpeakTimeInfo` struct, such as `elapsed_seconds` and `total_seconds`, as needed for further optimization. - Within `VersionStorageInfo::ComputeFilesMarkedForPeriodicCompaction()`, we've adjusted the `allowed_time_limit` to include files that are expected to expire by the next offpeak start. - We might explore further optimizations, such as evenly distributing files to mark during offpeak hours, if the initial approach results in marking too many files simultaneously during the first scoring in offpeak hours. The primary objective of this PR is to prevent periodic compactions during non-offpeak hours when offpeak hours are configured. We'll start with this straightforward solution and assess whether it suffices for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12031 Test Plan: Unit Tests added - `DBCompactionTest::LevelPeriodicCompactionOffpeak` for Leveled - `DBTestUniversalCompaction2::PeriodicCompaction` for Universal Reviewed By: cbi42 Differential Revision: D50900292 Pulled By: jaykorean fbshipit-source-id: 267e7d3332d45a5d9881796786c8650fa0a3b43d |
|
|
Yu Zhang
|
4b013dcbed |
Remove VersionEdit's friends pattern (#12024)
Summary: Almost each of VersionEdit private member has its own getter and setter. Current code access them with a combination of directly accessing private members and via getter and setters. There is no obvious benefits to have this pattern except potential performance gains. I tried this simple benchmark for removing the friends pattern completely, and there is no obvious regression. So I think it would good to remove VersionEdit's friends completely. ```TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num_column_families=10 -num=50000000``` With change: fillseq : 2.994 micros/op 333980 ops/sec 149.710 seconds 50000000 operations; 36.9 MB/s fillseq : 3.033 micros/op 329656 ops/sec 151.673 seconds 50000000 operations; 36.5 MB/s fillseq : 2.991 micros/op 334369 ops/sec 149.535 seconds 50000000 operations; 37.0 MB/s Without change: fillseq : 3.015 micros/op 331715 ops/sec 150.732 seconds 50000000 operations; 36.7 MB/s fillseq : 3.044 micros/op 328553 ops/sec 152.182 seconds 50000000 operations; 36.3 MB/s fillseq : 3.091 micros/op 323520 ops/sec 154.550 seconds 50000000 operations; 35.8 MB/s Pull Request resolved: https://github.com/facebook/rocksdb/pull/12024 Reviewed By: pdillinger Differential Revision: D50806066 Pulled By: jowlyzhang fbshipit-source-id: 35d287ce638a38c30f243f85992e615b4c90eb27 |
|
|
Jay Huh
|
e230e4d248 |
Make OffpeakTimeInfo available in VersionSet (#12018)
Summary: As mentioned in https://github.com/facebook/rocksdb/issues/11893, we are going to use the offpeak time information to pre-process TTL-based compactions. To do so, we need to access `daily_offpeak_time_utc` in `VersionStorageInfo::ComputeCompactionScore()` where we pick the files to compact. This PR is to make the offpeak time information available at the time of compaction-scoring. We are not changing any compaction scoring logic just yet. Will follow up in a separate PR. There were two ways to achieve what we want. 1. Make `MutableDBOptions` available in `ColumnFamilyData` and `ComputeCompactionScore()` take `MutableDBOptions` along with `ImmutableOptions` and `MutableCFOptions`. 2. Make `daily_offpeak_time_utc` and `IsNowOffpeak()` available in `VersionStorageInfo`. We chose the latter as it involves smaller changes. This change includes the following - Introduction of `OffpeakTimeInfo` and `IsNowOffpeak()` has been moved from `MutableDBOptions` - `OffpeakTimeInfo` added to `VersionSet` and it can be set during construction and by `ChangeOffpeakTimeInfo()` - During `SetDBOptions()`, if offpeak time info needs to change, it calls `MaybeScheduleFlushOrCompaction()` to re-compute compaction scores and process compactions as needed Pull Request resolved: https://github.com/facebook/rocksdb/pull/12018 Test Plan: - `DBOptionsTest::OffpeakTimes` changed to include checks for `MaybeScheduleFlushOrCompaction()` calls and `VersionSet`'s OffpeakTimeInfo value change during `SetDBOptions()`. - `VersionSetTest::OffpeakTimeInfoTest` added to test `ChangeOffpeakTimeInfo()`. `IsNowOffpeak()` tests moved from `DBOptionsTest::OffpeakTimes` Reviewed By: pdillinger Differential Revision: D50723881 Pulled By: jaykorean fbshipit-source-id: 3cff0291936f3729c0e9c7750834b9378fb435f6 |
|
|
Peter Dillinger
|
4155087746 |
Use manifest to persist pre-allocated seqnos (#11995)
Summary: ... and other fixes for crash test after https://github.com/facebook/rocksdb/issues/11922. * When pre-allocating sequence numbers for establishing a time history, record that last sequence number in the manifest so that it is (most likely) restored on recovery even if no user writes were made or were recovered (e.g. no WAL). * When pre-allocating sequence numbers for establishing a time history, only do this for actually new DBs. * Remove the feature that ensures non-zero sequence number on creating the first column family with preserve/preclude option after initial DB::Open. Until fixed in a way compatible with the crash test, this creates a gap where some data written with active preserve/preclude option won't have a known associated time. Together, these ensure we don't upset the crash test by manipulating sequence numbers after initial DB creation (esp when re-opening with different options). (The crash test expects that the seqno after re-open corresponds to a known point in time from previous crash test operation, matching an expected DB state.) Follow-up work: * Re-fill the gap to ensure all data written under preserve/preclude settings have a known time estimate. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11995 Test Plan: Added to unit test SeqnoTimeTablePropTest.PrePopulateInDB Verified fixes two crash test scenarios: ## 1st reproducer First apply ``` diff --git a/db_stress_tool/expected_state.cc b/db_stress_tool/expected_state.cc index b483e154c..ef63b8d6c 100644 --- a/db_stress_tool/expected_state.cc +++ b/db_stress_tool/expected_state.cc @@ -333,6 +333,7 @@ Status FileExpectedStateManager::SaveAtAndAfter(DB* db) { s = NewFileTraceWriter(Env::Default(), soptions, trace_file_path, &trace_writer); } + if (getenv("CRASH")) assert(false); if (s.ok()) { TraceOptions trace_opts; trace_opts.filter |= kTraceFilterGet; ``` Then ``` mkdir -p /dev/shm/rocksdb_test/rocksdb_crashtest_expected mkdir -p /dev/shm/rocksdb_test/rocksdb_crashtest_whitebox rm -rf /dev/shm/rocksdb_test/rocksdb_crashtest_*/* CRASH=1 ./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=1 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --preserve_internal_time_seconds=36000 ./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=0 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --preserve_internal_time_seconds=0 ``` Without the fix you get ``` ... DB path: [/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox] (Re-)verified 34 unique IDs Error restoring historical expected values: Corruption: DB is older than any restorable expected state ``` ## 2nd reproducer First apply ``` diff --git a/db_stress_tool/db_stress_test_base.cc b/db_stress_tool/db_stress_test_base.cc index 62ddead7b..f2654980f 100644 --- a/db_stress_tool/db_stress_test_base.cc +++ b/db_stress_tool/db_stress_test_base.cc @@ -1126,6 +1126,7 @@ void StressTest::OperateDb(ThreadState* thread) { // OPERATION write TestPut(thread, write_opts, read_opts, rand_column_families, rand_keys, value); + if (getenv("CRASH")) assert(false); } else if (prob_op < del_bound) { assert(write_bound <= prob_op); // OPERATION delete ``` Then ``` rm -rf /dev/shm/rocksdb_test/rocksdb_crashtest_*/* CRASH=1 ./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=1 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --disable_wal=1 --reopen=0 --preserve_internal_time_seconds=0 ./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=0 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --disable_wal=1 --reopen=0 --preserve_internal_time_seconds=3600 ``` Without the fix you get ``` DB path: [/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox] (Re-)verified 34 unique IDs db_stress: db_stress_tool/expected_state.cc:380: virtual rocksdb::{anonymous}::ExpectedStateTraceRecordHandler::~ ExpectedStateTraceRecordHandler(): Assertion `IsDone()' failed. ``` Reviewed By: jowlyzhang Differential Revision: D50533346 Pulled By: pdillinger fbshipit-source-id: 1056be45c5b9e537c8c601b28c4b27431a782477 |
|
|
Changyu Bi
|
648fe25bc0 |
Always clear files marked for compaction in `ComputeCompactionScore()` (#11946)
Summary: We were seeing the following stress test failures: ```LevelCompactionBuilder::PickFileToCompact(const rocksdb::autovector<std::pair<int, rocksdb::FileMetaData*> >&, bool): Assertion `!level_file.second->being_compacted' failed``` This can happen when we are picking a file to be compacted from some files marked for compaction, but that file is already being_compacted. We prevent this by always calling `ComputeCompactionScore()` after we pick a compaction and mark some files as being_compacted. However, if SetOptions() is called to disable marking certain files to be compacted, say `enable_blob_garbage_collection`, we currently just skip the relevant logic in `ComputeCompactionScore()` without clearing the existing files already marked for compaction. This PR fixes this issue by already clearing these files. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11946 Test Plan: existing tests. Reviewed By: akankshamahajan15 Differential Revision: D50232608 Pulled By: cbi42 fbshipit-source-id: 11e4fb5e9d48b0f946ad33b18f7c005f0161f496 |
|
|
Peter Dillinger
|
1d5bddbc58 |
Bootstrap, pre-populate seqno_to_time_mapping (#11922)
Summary: This change has two primary goals (follow-up to https://github.com/facebook/rocksdb/issues/11917, https://github.com/facebook/rocksdb/issues/11920): * Ensure the DB seqno_to_time_mapping has entries that allow us to put a good time lower bound on any writes that happen after setting up preserve/preclude options (either in a new DB, new CF, SetOptions, etc.) and haven't yet aged out of that time window. This allows us to remove a bunch of work-arounds in tests. * For new DBs using preserve/preclude options, automatically reserve some sequence numbers and pre-map them to cover the time span back to the preserve/preclude cut-off time. In the future, this will allow us to import data from another DB by key, value, and write time by assigning an appropriate seqno in this DB for that write time. Note that the pre-population (historical mappings) does not happen if the original options at DB Open time do not have preserve/preclude, so it is recommended to create initial column families at that time with create_missing_column_families, to take advantage of this (future) feature. (Adding these historical mappings after DB Open would risk non-monotonic seqno_to_time_mapping, which is dubious if not dangerous.) Recommended follow-up: * Solve existing race conditions (not memory safety) where parallel operations like CreateColumnFamily or SetDBOptions could leave the wrong setting in effect. * Make SeqnoToTimeMapping more gracefully handle a possible case in which too many mappings are added for the time range of concern. It seems like there could be cases where data is massively excluded from the cold tier because of entries falling off the front of the mapping list (causing GetProximalSeqnoBeforeTime() to return 0). (More investigation needed.) No release note for the minor bug fix because this is still an experimental feature with limited usage. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11922 Test Plan: tests added / updated Reviewed By: jowlyzhang Differential Revision: D49956563 Pulled By: pdillinger fbshipit-source-id: 92beb918c3a298fae9ca8e509717b1067caa1519 |
|
|
Levi Tamasi
|
f42e70bf56 |
Integrate FullMergeV3 into the query and compaction paths (#11858)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/11858 The patch builds on https://github.com/facebook/rocksdb/pull/11807 and integrates the `FullMergeV3` API into the read and compaction code paths by updating and extending the logic in `MergeHelper`. In particular, when it comes to merge inputs, the existing `TimedFullMergeWithEntity` is folded into `TimedFullMerge`, since wide-column base values are now handled the same way as plain base values (or no base values for that matter), e.g. they are passed directly to the `MergeOperator`. On the other hand, there is some new differentiation on the output side. Namely, there are now two sets of `TimedFullMerge` variants: one set for contexts where the complete merge result and its value type are needed (used by iterators and compactions), and another set where the merge result is needed in a form determined by the client (used by the point lookup APIs, where e.g. for `Get` we have to extract the value of the default column of any wide-column results). Implementation-wise, the two sets of overloads use different visitors to process the `std::variant` produced by `FullMergeV3`. This has the benefit of eliminating some repeated code e.g. in the point lookup paths, since `TimedFullMerge` now populates the application's result object (`PinnableSlice`/`string` or `PinnableWideColumns`) directly. Moreover, within each set of variants, there is a separate overload for the no base value/plain base value/wide-column base value cases, which eliminates some repeated branching w/r/t to the type of the base value if any. Reviewed By: jaykorean Differential Revision: D49352562 fbshipit-source-id: c2fb9853dba3fbbc6918665bde4195c4ea150a0c |
|
|
leipeng
|
68ce5d84f6 |
Add new Iterator API Refresh(const snapshot*) (#10594)
Summary: This PR resolves https://github.com/facebook/rocksdb/issues/10487 & https://github.com/facebook/rocksdb/issues/10536, user code needs to call Refresh() periodically. The main code change is to support range deletions. A range tombstone iterator uses a sequence number as upper bound to decide which range tombstones are effective. During Iterator refresh, this sequence number upper bound needs to be updated for all range tombstone iterators under DBIter and LevelIterator. LevelIterator may create new table iterators and range tombstone iterator during scanning, so it needs to be aware of iterator refresh. The code path that propagates this change is `db_iter_->set_sequence(read_seq) -> MergingIterator::SetRangeDelReadSeqno() -> TruncatedRangeDelIterator::SetRangeDelReadSeqno() and LevelIterator::SetRangeDelReadSeqno()`. This change also fixes an issue where range tombstone iterators created by LevelIterator may access ReadOptions::snapshot, even though we do not explicitly require users to keep a snapshot alive after creating an Iterator. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10594 Test Plan: * New unit tests. * Add Iterator::Refresh(snapshot) to stress test. Note that this change only adds tests for refreshing to the same snapshot since this is the main target use case. TODO in a following PR: * Stress test Iterator::Refresh() to different snapshots or no snapshot. Reviewed By: ajkr Differential Revision: D48456896 Pulled By: cbi42 fbshipit-source-id: 2e642c04e91235cc9542ef4cd37b3c20823bd779 |
|
|
Levi Tamasi
|
8fc78a3a9e |
Add helper methods WideColumnsHelper::{Has,Get}DefaultColumn (#11813)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/11813 The patch adds a couple of helper methods `WideColumnsHelper::{Has,Get}DefaultColumn` to eliminate some code duplication. Reviewed By: jaykorean Differential Revision: D49166682 fbshipit-source-id: f229ca5b94599f7445a0112b10f8317292505c82 |
|
|
Changyu Bi
|
d1ff401472 |
Delay bottommost level single file compactions (#11701)
Summary: For leveled compaction, RocksDB has a special kind of compaction with reason "kBottommmostFiles" that compacts bottommost level files to clear data held by snapshots (more detail in https://github.com/facebook/rocksdb/issues/3009). Such compactions can happen soon after a relevant snapshot is released. For some use cases, a bottommost file may contain only a small amount of keys that can be cleared, so compacting such a file has a high write amp. In addition, these bottommost files may be compacted in compactions with reason other than "kBottommmostFiles" if we wait for some time (so that enough data is ingested to trigger such a compaction). This PR introduces an option `bottommost_file_compaction_delay` to specify the delay of these bottommost level single file compactions. * The main change is in `VersionStorageInfo::ComputeBottommostFilesMarkedForCompaction()` where we only add a file to `bottommost_files_marked_for_compaction_` if it oldest_snapshot is larger than its non-zero largest_seqno **and** the file is old enough. Note that if a file is not old enough but its largest_seqno is less than oldest_snapshot, we exclude it from the calculation of `bottommost_files_mark_threshold_`. This makes the change simpler, but such a file's eligibility for compaction will only be checked the next time `ComputeBottommostFilesMarkedForCompaction()` is called. This happens when a new Version is created (compaction, flush, SetOptions()...), a new enough snapshot is released (`VersionStorageInfo::UpdateOldestSnapshot()`) or when a compaction is picked and compaction score has to be re-calculated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11701 Test Plan: * Add two unit tests to test when bottommost_file_compaction_delay > 0. * Ran crash test with the new option. Reviewed By: jaykorean, ajkr Differential Revision: D48331564 Pulled By: cbi42 fbshipit-source-id: c584f3dc5f6354fce3ed65f4c6366dc450b15ba8 |
|
|
tabokie
|
6d1effaf01 |
exclude uninitialized files when estimating compression ratio (#11664)
Summary: Exclude files with uninitialized table properties when estimating compression ratio. Cherry-picking downstream PR: https://github.com/tikv/rocksdb/pull/335 Pull Request resolved: https://github.com/facebook/rocksdb/pull/11664 Reviewed By: cbi42 Differential Revision: D48002518 Pulled By: ajkr fbshipit-source-id: 931fac8a06b4ed7b7b605cf79903302f1b8babfd |
|
|
Yu Zhang
|
c24ef26ca7 |
Support switching on / off UDT together with in-Memtable-only feature (#11623)
Summary:
Add support to allow enabling / disabling user-defined timestamps feature for an existing column family in combination with the in-Memtable only feature.
To do this, this PR includes:
1) Log the `persist_user_defined_timestamps` option per column family in Manifest to facilitate detecting an attempt to enable / disable UDT. This entry is enforced to be logged in the same VersionEdit as the user comparator name entry.
2) User-defined timestamps related options are validated when re-opening a column family, including user comparator name and the `persist_user_defined_timestamps` flag. These type of settings and settings change are considered valid:
a) no user comparator change and no effective `persist_user_defined_timestamp` flag change.
b) switch user comparator to enable UDT provided the immediately effective `persist_user_defined_timestamps` flag
is false.
c) switch user comparator to disable UDT provided that the before-change `persist_user_defined_timestamps` is
already false.
3) when an attempt to enable UDT is detected, we mark all its existing SST files as "having no UDT" by marking its `FileMetaData.user_defined_timestamps_persisted` flag to false and handle their file boundaries `FileMetaData.smallest`, `FileMetaData.largest` by padding a min timestamp.
4) while enabling / disabling UDT feature, timestamp size inconsistency in existing WAL logs are handled to make it compatible with the running user comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11623
Test Plan:
```
make all check
./db_with_timestamp_basic_test --gtest-filter="*EnableDisableUDT*"
./db_wal_test --gtest_filter="*EnableDisableUDT*"
```
Reviewed By: ltamasi
Differential Revision: D47636862
Pulled By: jowlyzhang
fbshipit-source-id: dcd19f67292da3c3cc9584c09ad00331c9ab9322
|
|
|
huangmengbin
|
98d0f6ec08 |
fix: VersionSet::DumpManifest (#11605)
Summary: Fixes https://github.com/facebook/rocksdb/issues/11604 Pull Request resolved: https://github.com/facebook/rocksdb/pull/11605 Reviewed By: jowlyzhang Differential Revision: D47459254 Pulled By: ajkr fbshipit-source-id: 4420e443fbf4bd01ddaa2b47285fc4445bf36246 |
|
|
weedge
|
1a7c741977 |
fix: std::optional value() build error on older macOS SDK (#11574)
Summary:
`PORTABLE=1 USE_SSE=1 USE_PCLMUL=1 WITH_JEMALLOC_FLAG=1 JEMALLOC=1 make static_lib` on MacOS
clang --version:
Apple clang version 12.0.0 (clang-1200.0.32.29)
Target: x86_64-apple-darwin22.4.0
Thread model: posix
InstalledDir: /Library/Developer/CommandLineTools/usr/bin
compile err like this:
util/udt_util.cc:39:39: error: 'value' is unavailable: introduced in macOS 10.14
if (running_ts_sz != recorded_ts_sz.value()) {
^
/Library/Developer/CommandLineTools/usr/bin/../include/c++/v1/optional:944:33: note: 'value' has been explicitly marked
unavailable here
constexpr value_type const& value() const&
^
util/udt_util.cc:217:62: error: 'value' is unavailable: introduced in macOS 10.14
*new_key = StripTimestampFromUserKey(key, record_ts_sz.value());
^
/Library/Developer/CommandLineTools/usr/bin/../include/c++/v1/optional:953:27: note: 'value' has been explicitly marked
unavailable here
constexpr value_type& value() &
^
2 errors generated.
make: *** [util/udt_util.o] Error 1
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11574
Reviewed By: ajkr
Differential Revision: D47269519
Pulled By: cbi42
fbshipit-source-id: da49d90cdf00a0af519f91c0cf7d257401eb395f
|
|
|
Yu Zhang
|
f74526341d |
Handle file boundaries when timestamps should not be persisted (#11578)
Summary:
Handle file boundaries `FileMetaData.smallest`, `FileMetaData.largest` for when `persist_user_defined_timestamps` is false:
1) on the manifest write path, the original user-defined timestamps in file boundaries are stripped. This stripping is done during `VersionEdit::Encode` to limit the effect of the stripping to only the persisted version of the file boundaries.
2) on the manifest read path during DB open, a a min timestamp is padded to the file boundaries. Ideally, this padding should happen during `VersionEdit::Decode` so that all in memory file boundaries have a compatible user key format as the running user comparator. However, because the user-defined timestamp size information is not available at that time. This change is added to `VersionEditHandler::OnNonCfOperation`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11578
Test Plan:
```
make all check
./version_edit_test --gtest_filter="*EncodeDecodeNewFile4HandleFileBoundary*".
./db_with_timestamp_basic_test --gtest_filter="*HandleFileBoundariesTest*"
```
Reviewed By: pdillinger
Differential Revision: D47309399
Pulled By: jowlyzhang
fbshipit-source-id: 21b4d54d2089a62826b31d779094a39cb2bbbd51
|
|
|
akankshamahajan
|
fbd2f563bb |
Add an interface to provide support for underlying FS to pass their own buffer during reads (#11324)
Summary: 1. Public API change: Replace `use_async_io` API in file_system with `SupportedOps` API which is used by underlying FileSystem to indicate to upper layers whether the FileSystem supports different operations introduced in `enum FSSupportedOps `. Right now operations are `async_io` and whether FS will provide its own buffer during reads or not. The api is changed to extend it to various FileSystem operations in one API rather than creating a separate API for each operation. 2. Provide support for underlying FS to pass their own buffer during Reads (async and sync read) instead of using RocksDB provided `scratch` (buffer) in `FSReadRequest`. Currently only MultiRead supports it and later will be extended to other reads as well (point lookup, scan etc). More details in how to enable in file_system.h Pull Request resolved: https://github.com/facebook/rocksdb/pull/11324 Test Plan: Tested locally Reviewed By: anand1976 Differential Revision: D44465322 Pulled By: akankshamahajan15 fbshipit-source-id: 9ec9e08f839b5cc815e75d5dade6cd549998d0ec |
|
|
Yu Zhang
|
7521478b43 |
Record the `persist_user_defined_timestamps` flag in manifest (#11515)
Summary: Start to record the value of the flag `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` in the Manifest and table properties for a SST file when it is created. And use the recorded flag when creating a table reader for the SST file. This flag's default value is true, it is only explicitly recorded if it's false. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11515 Test Plan: ``` make all check ./version_edit_test ``` Reviewed By: ltamasi Differential Revision: D46920386 Pulled By: jowlyzhang fbshipit-source-id: 075c20363d3d2cc1368422ecc805617ed135cc26 |
|
|
Changyu Bi
|
bc04ec85db |
Make option `level_compaction_dynamic_level_bytes` true by default (#11525)
Summary: after https://github.com/facebook/rocksdb/issues/11321 and https://github.com/facebook/rocksdb/issues/11340 (both included in RocksDB v8.2), migration from `level_compaction_dynamic_level_bytes=false` to `level_compaction_dynamic_level_bytes=true` is automatic by RocksDB and requires no manual compaction from user. Making the option true by default as it has several advantages: 1. better space amplification guarantee (a more stable LSM shape). 2. compaction is more adaptive to write traffic. 3. automatic draining of unneeded levels. Wiki is updated with more detail: https://github.com/facebook/rocksdb/wiki/Leveled-Compaction#option-level_compaction_dynamic_level_bytes-and-levels-target-size. The PR mostly contains fixes for unit tests as they assumed `level_compaction_dynamic_level_bytes=false`. Most notable change is commit |
|
|
Changyu Bi
|
15e8a843d9 |
Do not include last level in compaction when `allow_ingest_behind=true` (#11489)
Summary: when a DB is configured with `allow_ingest_behind = true`, the last level should be reserved for ingested files and these files should not be included in any compaction. Currently, a major compaction can compact these files to smaller levels. This can cause future files to be rejected for ingest behind (see `ExternalSstFileIngestionJob::CheckLevelForIngestedBehindFile()`). This PR fixes the issue such that files in the last level is not included in any compaction. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11489 Test Plan: * Updated unit test `ExternalSSTFileTest.IngestBehind` to test that last level is not included in manual and auto-compaction. Reviewed By: ajkr Differential Revision: D46455711 Pulled By: cbi42 fbshipit-source-id: 5e2142c2a709ef932ad797897795021c06c4ac8c |
|
|
Andrew Kryczka
|
cac3240cbf |
add property "rocksdb.obsolete-sst-files-size" (#11533)
Summary: See "unreleased_history/new_features/obsolete_sst_files_size.md" for description Pull Request resolved: https://github.com/facebook/rocksdb/pull/11533 Test Plan: updated unit test Reviewed By: jowlyzhang Differential Revision: D46703152 Pulled By: ajkr fbshipit-source-id: ea5e31cd6293eccc154130c13e66b5271f57c102 |
|
|
Hui Xiao
|
dcc6fc99f9 |
Fix StopWatch bug; Remove setting `record_read_stats` (#11474)
Summary: **Context/Summary:** - StopWatch enable stats even when `StatsLevel::kExceptTimers` is set. It's a harmless bug though since `reportTimeToHistogram()` will not report it anyway according to https://github.com/facebook/rocksdb/blob/main/include/rocksdb/statistics.h#L705 - https://github.com/facebook/rocksdb/pull/11288 should have removed logics of setting `record_read_stats = !for_compaction` as we don't differentiate `RandomAccessFileReader`'s stats behavior based on compaction or not (instead we now report stats of different IO activities including compaction to different stats). Fixing this should report more compaction related file read micros that aren't reported previously due to `for_compaction==true` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11474 Test Plan: - DB bench pre vs post fix with small max_open_files Setup command `./db_ bench -db=/dev/shm/testdb/ -statistics=true -benchmarks=fillseq -key_size=32 -value_size=512 -num=5000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=true -compression_type=none -bloom_bits=3` Run command `./db_bench --open_files=1 -use_existing_db=true -db=/dev/shm/testdb2/ -statistics=true -benchmarks=compactall -key_size=32 -value_size=512 -num=5000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=true -compression_type=none -bloom_bits=3` Pre-fix ``` rocksdb.sst.read.micros P50 : 2.056175 P95 : 4.647739 P99 : 8.948475 P100 : 25.000000 COUNT : 4451 SUM : 12827 rocksdb.file.read.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.read.compaction.micros P50 : 2.057397 P95 : 4.625253 P99 : 8.749474 P100 : 25.000000 COUNT : 4382 SUM : 12608 rocksdb.file.read.db.open.micros P50 : 1.985294 P95 : 9.100000 P99 : 13.000000 P100 : 13.000000 COUNT : 69 SUM : 219 ``` Post-fix (with a higher `rocksdb.file.read.compaction.micros` count) ``` rocksdb.sst.read.micros P50 : 1.858968 P95 : 3.653086 P99 : 5.968000 P100 : 21.000000 COUNT : 3548 SUM : 9119 rocksdb.file.read.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.read.compaction.micros P50 : 1.857027 P95 : 3.627614 P99 : 5.738621 P100 : 21.000000 COUNT : 3479 SUM : 8904 rocksdb.file.read.db.open.micros P50 : 2.000000 P95 : 6.733333 P99 : 11.000000 P100 : 11.000000 COUNT : 69 SUM : 215 ``` - CI Reviewed By: ajkr Differential Revision: D46137221 Pulled By: hx235 fbshipit-source-id: e5b4ee7001af26f2ee0377bc6334f43b2a527388 |
|
|
mayue.fight
|
8d8eb0e77e |
Support Clip DB to KeyRange (#11379)
Summary: This PR is part of the request https://github.com/facebook/rocksdb/issues/11317. (Another part is https://github.com/facebook/rocksdb/pull/11378) ClipDB() will clip the entries in the CF according to the range [begin_key, end_key). All the entries outside this range will be completely deleted (including tombstones). This feature is mainly used to ensure that there is no overlapping Key when calling CreateColumnFamilyWithImports() to import multiple CFs. When Calling ClipDB [begin, end), there are the following steps 1. Quickly and directly delete files without overlap DeleteFilesInRanges(nullptr, begin) + DeleteFilesInRanges(end, nullptr) 2. Delete the Key outside the range Delete[smallest_key, begin) + Delete[end, largest_key] 3. Delete the tombstone through Manul Compact CompactRange(option, nullptr, nullptr) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11379 Reviewed By: ajkr Differential Revision: D45840358 Pulled By: cbi42 fbshipit-source-id: 54152e8a45fd8ede137f99787eb252f0b51440a4 |
|
|
Changyu Bi
|
8827cd0618 |
Support compacting files to different temperatures in FIFO compaction (#11428)
Summary: - Add a new option `CompactionOptionsFIFO::file_temperature_age_thresholds` that allows user to specify age thresholds for compacting files to different temperatures. File temperature can be used to store files in different storage media. The new options allows specifying multiple temperature-age pairs. The option uses struct for a temperature-age pair to use the existing parsing functionality to make the option dynamically settable. - Deprecate the old option `age_for_warm` that was added for a similar purpose. - Compaction score calculation logic is updated to check if a file needs to be compacted to change its temperature. - Some refactoring is done in `FIFOCompactionPicker::PickTemperatureChangeCompaction`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11428 Test Plan: adapted unit tests that were for `age_for_warm` to this new option. Reviewed By: ajkr Differential Revision: D45611412 Pulled By: cbi42 fbshipit-source-id: 2dc384841f61cc04abb9681e31aa2de0f0b06106 |