Summary:
We have updated earlier release branches going back to 5.5 so they are
built using gcc7 by default. Disabling ancient versions before that
until we figure out a plan for them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5990
Test Plan: Ran the script locally.
Differential Revision: D18252386
Pulled By: ltamasi
fbshipit-source-id: a7bbb30dc52ff2eaaf31a29ecc79f7cf4e2834dc
Summary:
Previously, periodic compaction is not supported in universal compaction. Add the support using following approach: if any file is marked as qualified for periodid compaction, trigger a full compaction. If a full compaction is prevented by files being compacted, try to compact the higher levels than files currently being compacted. If in this way we can only compact the last sorted run and none of the file to be compacted qualifies for periodic compaction, skip the compact. This is to prevent the same single level compaction from being executed again and again.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5970
Test Plan: Add several test cases.
Differential Revision: D18147097
fbshipit-source-id: 8ecc308154d9aca96fb192c51fbceba3947550c1
Summary:
Right now, by default FIFO compaction has no TTL. We believe that a default TTL of 30 days will be better. With this patch, the default will be changed to 30 days. Default of Options.periodic_compaction_seconds will mean the same as options.ttl. If Options.ttl and Options.periodic_compaction_seconds left default, a default 30 days TTL will be used. If both options are set, the stricter value of the two will be used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5987
Test Plan: Add an option sanitize test to cover the case.
Differential Revision: D18237935
fbshipit-source-id: a6dcea1f36c3849e13c0a69e413d73ad8eab58c9
Summary:
Compaction iterator has many assert statements that are active only during test runs. Some rare bugs would show up only at runtime could violate the assert condition but go unnoticed since assert statements are not compiled in release mode. Turning the assert statements to runtime check sone pors and cons:
Pros:
- A bug that would result into incorrect data would be detected early before the incorrect data is written to the disk.
Cons:
- Runtime overhead: which should be negligible since compaction cpu is the minority in the overall cpu usage
- The assert statements might already being violated at runtime, and turning them to runtime failure might result into reliability issues.
The patch takes a conservative step in this direction by logging the assert violations at runtime. If we see any violation reported in logs, we investigate. Otherwise, we can go ahead turning them to runtime error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5935
Differential Revision: D18229697
Pulled By: maysamyabandeh
fbshipit-source-id: f1890eca80ccd7cca29737f1825badb9aa8038a8
Summary:
Recently, pipelined write is enabled even if atomic flush is enabled, which causing sanitizing failure in db_stress. Revert this change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5986
Test Plan: Run "make crash_test_with_atomic_flush" and see it to run for some while so that the old sanitizing error (which showed up quickly) doesn't show up.
Differential Revision: D18228278
fbshipit-source-id: 27fdf2f8e3e77068c9725a838b9bef4ab25a2553
Summary:
More release branches are created. We should include them in continuous format compatibility checks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5985
Test Plan: Let's see whether it is passes.
Differential Revision: D18226532
fbshipit-source-id: 75d8cad5b03ccea4ce16f00cea1f8b7893b0c0c8
Summary:
In pipeline writing mode, memtable switching needs to wait for memtable writing to finish to make sure that when memtables are made immutable, inserts are not going to them. This is currently done in DBImpl::SwitchMemtable(). This is done after flush_scheduler_.TakeNextColumnFamily() is called to fetch the list of column families to switch. The function flush_scheduler_.TakeNextColumnFamily() itself, however, is not thread-safe when being called together with flush_scheduler_.ScheduleFlush().
This change provides a fix, which moves the waiting logic before flush_scheduler_.TakeNextColumnFamily(). WaitForPendingWrites() is a natural place where the logic can happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5716
Test Plan: Run all tests with ASAN and TSAN.
Differential Revision: D18217658
fbshipit-source-id: b9c5e765c9989645bf10afda7c5c726c3f82f6c3
Summary:
Right now, in db_stress's iterator tests, we always use the same CF to validate iterator results. This commit changes it so that a randomized CF is used in Cf consistency test, where every CF should have exactly the same data. This would help catch more bugs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5983
Test Plan: Run "make crash_test_with_atomic_flush".
Differential Revision: D18217643
fbshipit-source-id: 3ac998852a0378bb59790b20c5f236f6a5d681fe
Summary:
- Periodic compactions are auto-enabled if a compaction filter or a compaction filter factory is set, in Level Compaction.
- The default value of `periodic_compaction_seconds` is changed to UINT64_MAX, which lets RocksDB auto-tune periodic compactions as needed. An explicit value of 0 will still work as before ie. to disable periodic compactions completely. For now, on seeing a compaction filter along with a UINT64_MAX value for `periodic_compaction_seconds`, RocksDB will make SST files older than 30 days to go through periodic copmactions.
Some RocksDB users make use of compaction filters to control when their data can be deleted, usually with a custom TTL logic. But it is occasionally possible that the compactions get delayed by considerable time due to factors like low writes to a key range, data reaching bottom level, etc before the TTL expiry. Periodic Compactions feature was originally built to help such cases. Now periodic compactions are auto enabled by default when compaction filters or compaction filter factories are used, as it is generally helpful to all cases to collect garbage.
`periodic_compaction_seconds` is set to a large value, 30 days, in `SanitizeOptions` when RocksDB sees that a `compaction_filter` or `compaction_filter_factory` is used.
This is done only for Level Compaction style.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5865
Test Plan:
- Added a new test `DBCompactionTest.LevelPeriodicCompactionWithCompactionFilters` to make sure that `periodic_compaction_seconds` is set if either `compaction_filter` or `compaction_filter_factory` options are set.
- `COMPILE_WITH_ASAN=1 make check`
Differential Revision: D17659180
Pulled By: sagar0
fbshipit-source-id: 4887b9cf2e53cf2dc93a7b658c6b15e1181217ee
Summary:
filter_bench is a specialized micro-benchmarking tool that
should not be needed with ROCKSDB_LITE. This should fix the LITE build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5978
Test Plan: make LITE=1 check
Differential Revision: D18177941
Pulled By: pdillinger
fbshipit-source-id: b73a171404661e09e018bc99afcf8d4bf1e2949c
Summary:
Fix for lite build
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5971
Test Plan: make J=1 -j64 LITE=1 all check
Differential Revision: D18148306
Pulled By: vjnadimpalli
fbshipit-source-id: 5b9a3edc3e73e054fee6b96e6f6e583cecc898f3
Summary:
* Adds support for plain table filter. This is not critical right now, but does add a -impl flag that will be useful for new filter implementations initially targeted at block-based table (and maybe later ported to plain table)
* Better mixing of inside vs. outside queries, for more realism
* A -best_case option handy for implementation tuning inner loop
* Option for whether to include hashing time in dry run / net timings
No modifications to production code, just filter_bench.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5968
Differential Revision: D18139872
Pulled By: pdillinger
fbshipit-source-id: 5b09eba963111b48f9e0525a706e9921070990e8
Summary:
Adding a new API to db.h that allows users to get file_creation_time of the oldest file in the DB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5948
Test Plan: Added unit test.
Differential Revision: D18056151
Pulled By: vjnadimpalli
fbshipit-source-id: 448ec9d34cb6772e1e5a62db399ace00dcbfbb5d
Summary:
Some filtering tests were unfriendly to new implementations of
FilterBitsBuilder because of dynamic_cast to FullFilterBitsBuilder. Most
of those have now been cleaned up, worked around, or at least changed
from crash on dynamic_cast failure to individual test failure.
Also put some clarifying comments on filter-related APIs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5960
Test Plan: make check
Differential Revision: D18121223
Pulled By: pdillinger
fbshipit-source-id: e83827d9d5d96315d96f8e25a99cd70f497d802c
Summary:
A bug occasionally shows up in crash test, and https://github.com/facebook/rocksdb/issues/5851 reproduces it.
The bug can surface in the following way.
1. Database has multiple column families.
2. Between one DB restart, the last log file is corrupted in the middle (not the tail)
3. During restart, DB crashes between flushing between two column families.
Then DB will fail to be opened again with error "SST file is ahead of WALs".
Solution is to update the log number associated with each column family altogether after flushing all column families' memtables. The version edits should be written to a new MANIFEST. Only after writing to all these version edits succeed does RocksDB (atomically) points the CURRENT file to the new MANIFEST.
Test plan (on devserver):
```
$make all && make check
```
Specifically
```
$make db_test2
$./db_test2 --gtest_filter=DBTest2.CrashInRecoveryMultipleCF
```
Also checked for compatibility as follows.
Use this branch, run DBTest2.CrashInRecoveryMultipleCF and preserve the db directory.
Then checkout 5.4, build ldb, and dump the MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5856
Differential Revision: D17620818
Pulled By: riversand963
fbshipit-source-id: b52ce5969c9a8052cacec2bd805fcfb373589039
Summary:
- Updated our included xxhash implementation to version 0.7.2 (== the latest dev version as of 2019-10-09).
- Using XXH_NAMESPACE (like other fb projects) to avoid potential name collisions.
- Added fastrange64, and unit tests for it and fastrange32. These are faster alternatives to hash % range.
- Use preview version of XXH3 instead of MurmurHash64A for NPHash64
-- Had to update cache_test to increase probability of passing for any given hash function.
- Use fastrange64 instead of % with uses of NPHash64
-- Had to fix WritePreparedTransactionTest.CommitOfDelayedPrepared to avoid deadlock apparently caused by new hash collision.
- Set default seed for NPHash64 because specifying a seed rarely makes sense for it.
- Removed unnecessary include xxhash.h in a popular .h file
- Rename preview version of XXH3 to XXH3p for clarity and to ease backward compatibility in case final version of XXH3 is integrated.
Relying on existing unit tests for NPHash64-related changes. Each new implementation of fastrange64 passed unit tests when manipulating my local build to select it. I haven't done any integration performance tests, but I consider the improved performance of the pieces being swapped in to be well established.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5909
Differential Revision: D18125196
Pulled By: pdillinger
fbshipit-source-id: f6bf83d49d20cbb2549926adf454fd035f0ecc0d
Summary:
The parts that are used to implement FilterPolicy /
NewBloomFilterPolicy and not used other than for the block-based table
should be consolidated under table/block_based/filter_policy*.
This change is step 2 of 2:
mv util/bloom.cc table/block_based/filter_policy.cc
This gets its own PR so that git has the best chance of following the
rename for blame purposes. Note that low-level shared implementation
details of Bloom filters remain in util/bloom_impl.h, and
util/bloom_test.cc remains where it is for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5966
Test Plan: make check
Differential Revision: D18124930
Pulled By: pdillinger
fbshipit-source-id: 823bc09025b3395f092ef46a46aa5ba92a914d84
Summary:
This patch adds a number of new information elements to the FlushJobInfo and
CompactionJobInfo structures that are passed to EventListeners via the
OnFlush{Begin, Completed} and OnCompaction{Begin, Completed} callbacks.
Namely, for flushes, the file numbers of the new SST and the oldest blob file it
references are propagated. For compactions, the new pieces of information are
the file number, level, and the oldest blob file referenced by each compaction
input and output file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5962
Test Plan:
Extended the EventListener unit tests with logic that checks that these information
elements are correctly propagated from the corresponding FileMetaData.
Differential Revision: D18095568
Pulled By: ltamasi
fbshipit-source-id: 6874359a6aadb53366b5fe87adcb2f9bd27a0a56
Summary:
The parts that are used to implement FilterPolicy /
NewBloomFilterPolicy and not used other than for the block-based table
should be consolidated under table/block_based/filter_policy*. I don't
foresee sharing these APIs with e.g. the Plain Table because they don't
expose hashes for reuse in indexing.
This change is step 1 of 2:
(a) mv table/full_filter_bits_builder.h to
table/block_based/filter_policy_internal.h which I expect to expand
soon to internally reveal more implementation details for testing.
(b) consolidate eventual contents of table/block_based/filter_policy.cc
in util/bloom.cc, which has the most elaborate revision history
(see step 2 ...)
Step 2 soon to follow:
mv util/bloom.cc table/block_based/filter_policy.cc
This gets its own PR so that git has the best chance of following the
rename for blame purposes. Note that low-level shared implementation
details of Bloom filters are in util/bloom_impl.h.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5963
Test Plan: make check
Differential Revision: D18121199
Pulled By: pdillinger
fbshipit-source-id: 8f21732c3d8909777e3240e4ac3123d73140326a
Summary:
The first version of filter_bench has selectable key size
but that size does not vary throughout a test run. This artificially
favors "branchy" hash functions like the existing BloomHash,
MurmurHash1, probably because of optimal return for branch prediction.
This change primarily varies those key sizes from -2 to +2 bytes vs.
the average selected size. We also set the default key size at 24 to
better reflect our best guess of typical key size.
But steadily random key sizes may not be realistic either. So this
change introduces a new filter_bench option:
-vary_key_size_log2_interval=n where the same key size is used 2^n
times and then changes to another size. I've set the default at 5
(32 times same size) as a compromise between deployments with
rather consistent vs. rather variable key sizes. On my Skylake
system, the performance boost to MurmurHash1 largely lies between
n=10 and n=15.
Also added -vary_key_alignment (bool, now default=true), though this
doesn't currently seem to matter in hash functions under
consideration.
This change also does a "dry run" for each testing scenario, to improve
the accuracy of those numbers, as there was more difference between
scenarios than expected. Subtracting gross test run times from dry run
times is now also embedded in the output, because these "net" times are
generally the most useful.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5933
Differential Revision: D18121683
Pulled By: pdillinger
fbshipit-source-id: 3c7efee1c5661a5fe43de555e786754ddf80dc1e
Summary:
For more information on the original problem see this [link](https://github.com/facebook/rocksdb/issues/3977).
This change adds two new tests. They are identical other than one uses range tombstones and the other does not. Each test generates sub files at L2 which overlap with keys L3. The test that uses range tombstones generates a single file at L2. This single file will generate a very large range overlap that will in turn create excessively large compaction.
1: T001 - T005
2: 000 - 005
In contrast, the test that uses key ranges generates 3 files at L2. As a single file is compacted at a time, those 3 files will generate less work per compaction iteration.
1: 001 - 002
1: 003 - 004
1: 005
2: 000 - 005
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5956
Differential Revision: D18071631
Pulled By: dlambrig
fbshipit-source-id: 12abae75fb3e0b022d228c6371698aa5e53385df
Summary:
Right now in CF consitency stres test's TestGet(), keys are just fetched without validation. With this change, in 1/2 the time, compare all the CFs share the same value with the same key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5863
Test Plan: Run "make crash_test_with_atomic_flush" and see tests pass. Hack the code to generate some inconsistency and observe the test fails as expected.
Differential Revision: D17934206
fbshipit-source-id: 00ba1a130391f28785737b677f80f366fb83cced
Summary:
This is an internal, file-local "feature" that is not used and
potentially confusing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5961
Test Plan: make check
Differential Revision: D18099018
Pulled By: pdillinger
fbshipit-source-id: 7870627eeed09941d12538ec55d10d2e164fc716
Summary:
In the previous PR https://github.com/facebook/rocksdb/issues/5934 , in the while loop, if/else if is used without ending with else to free the object referenced by ra, it might cause potential memory leak (warning during compiling). Fix it by changing the last "else if" to "else".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5955
Test Plan: pass make asan check, pass the USE_CLANG=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make -j64 analyze.
Differential Revision: D18071612
Pulled By: zhichao-cao
fbshipit-source-id: 51c00023d0c97c2921507254329aed55d56e1786
Summary:
Since we already parse env_uri from command line and creates custom Env
accordingly, we should invoke the methods of such Envs instead of using
Env::Default().
Test Plan (on devserver):
```
$make db_bench db_stress
$./db_bench -benchmarks=fillseq
./db_stress
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5943
Differential Revision: D18018550
Pulled By: riversand963
fbshipit-source-id: 03b61329aaae0dfd914a0b902cc677f570f102e3
Summary:
include db_stress_tool in rocksdb tools lib
Test Plan (on devserver):
```
$make db_stress
$./db_stress
$make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5950
Differential Revision: D18044399
Pulled By: riversand963
fbshipit-source-id: 895585abbbdfd8b954965921dba4b1400b7af1b1
Summary:
Several error paths in opening of a plain table would leak memory. PR https://github.com/facebook/rocksdb/issues/5940 opened the leak to one more error path, which happens to have been (mistakenly) exercised by CuckooTableDBTest.AdaptiveTable. That test has been fixed, and the exercising of
plain table error cases (more than before) has been added as BadOptions1 and BadOptions2
to PlainTableDBTest. This effectively moved the memory leak to plain_table_db_test.
Also here is a cheap fix for the memory leak, without (yet?) changing the signature of
ReadTableProperties. This fixes ASAN on unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5951
Test Plan: make COMPILE_WITH_ASAN=1 check
Differential Revision: D18051940
Pulled By: pdillinger
fbshipit-source-id: e2952930c09a2b46c4f1ff09818c5090426929de
Summary:
The pointer ra needs to be freed the status s returns not OK. In the previous PR https://github.com/facebook/rocksdb/issues/5934 , the ra is not freed which might cause potential memory leak. Fix this issue by moving the clarification of ra inside the while loop and freeing it as desired.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5949
Test Plan: pass make asan check.
Differential Revision: D18045726
Pulled By: zhichao-cao
fbshipit-source-id: d5445b7b832c8bb1dafe008bafea7bfe9eb0b1ce
Summary:
Right now, when LevelIterator::Seek() is called, when a file is filtered out by prefix bloom filter, the position is put to the beginning of the next file. This is a confusing internal interface because many keys in the levels are skipped. Avoid this behavior by checking the key of the next file against the seek key, and invalidate the whole iterator if the prefix doesn't match.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5861
Test Plan: Add a new unit test to validate the behavior; run all exsiting tests; run crash_test
Differential Revision: D17918213
fbshipit-source-id: f06b47d937c7cc8919001f18dcc3af5b28c9cdac
Summary:
A recent change introduced readahead inside VerifyChecksum(). However it is not compatible with mmap mode and generated wrong checksum verification failure. Fix it by not enabling readahead in mmap
mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5945
Test Plan: Add a unit test that used to fail.
Differential Revision: D18021443
fbshipit-source-id: 6f2eb600f81b26edb02222563a4006869d576bff
Summary:
Some dependency path is not correct so that ASAN cannot run with CLANG. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5946
Test Plan: Run ASAN with CLANG
Differential Revision: D18040933
fbshipit-source-id: 1d82be9d350485cf1df1c792dad765188958641f
Summary:
Amongst other things, PR https://github.com/facebook/rocksdb/issues/5504 refactored the filter block readers so that
only the filter block contents are stored in the block cache (as opposed to the
earlier design where the cache stored the filter block reader itself, leading to
potentially dangling pointers and concurrency bugs). However, this change
introduced a performance hit since with the new code, the metadata fields are
re-parsed upon every access. This patch reunites the block contents with the
filter bits reader to eliminate this overhead; since this is still a self-contained
pure data object, it is safe to store it in the cache. (Note: this is similar to how
the zstd digest is handled.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5936
Test Plan:
make asan_check
filter_bench results for the old code:
```
$ ./filter_bench -quick
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 26.7153
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 33.4258
Single filter ns/op: 42.5974
Random filter ns/op: 217.861
----------------------------
Outside queries...
Dry run (25d) ns/op: 32.4217
Single filter ns/op: 50.9855
Random filter ns/op: 219.167
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
$ ./filter_bench -quick -use_full_block_reader
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 26.5172
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 32.3556
Single filter ns/op: 83.2239
Random filter ns/op: 370.676
----------------------------
Outside queries...
Dry run (25d) ns/op: 32.2265
Single filter ns/op: 93.5651
Random filter ns/op: 408.393
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
```
With the new code:
```
$ ./filter_bench -quick
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 25.4285
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 31.0594
Single filter ns/op: 43.8974
Random filter ns/op: 226.075
----------------------------
Outside queries...
Dry run (25d) ns/op: 31.0295
Single filter ns/op: 50.3824
Random filter ns/op: 226.805
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
$ ./filter_bench -quick -use_full_block_reader
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 26.5308
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 33.2968
Single filter ns/op: 58.6163
Random filter ns/op: 291.434
----------------------------
Outside queries...
Dry run (25d) ns/op: 32.1839
Single filter ns/op: 66.9039
Random filter ns/op: 292.828
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
```
Differential Revision: D17991712
Pulled By: ltamasi
fbshipit-source-id: 7ea205550217bfaaa1d5158ebd658e5832e60f29
Summary:
Since SeekForPrev (used by Prev) is not supported by HashSkipList when prefix is used, we disable it when stress testing HashSkipList.
- Change the default memtablerep to skip list.
- Avoid Prev() when memtablerep is HashSkipList and prefix is used.
Test Plan (on devserver):
```
$make db_stress
$./db_stress -ops_per_thread=10000 -reopen=1 -destroy_db_initially=true -column_families=1 -threads=1 -column_families=1 -memtablerep=prefix_hash
$# or simply
$./db_stress
$./db_stress -memtablerep=prefix_hash
```
Results must print "Verification successful".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5942
Differential Revision: D18017062
Pulled By: riversand963
fbshipit-source-id: af867e59aa9e6f533143c984d7d529febf232fd7
Summary:
FullFilterBitsReader, after creating in BloomFilterPolicy, was
responsible for decoding metadata bits. This meant that
FullFilterBitsReader::MayMatch had some metadata checks in order to
implement "always true" or "always false" functionality in the case
of inconsistent or trivial metadata. This made for ugly
mixing-of-concerns code and probably had some runtime cost. It also
didn't really support plugging in alternative filter implementations
with extensions to the existing metadata schema.
BloomFilterPolicy::GetFilterBitsReader is now (exclusively) responsible
for decoding filter metadata bits and constructing appropriate instances
deriving from FilterBitsReader. "Always false" and "always true" derived
classes allow FullFilterBitsReader not to be concerned with handling of
trivial or inconsistent metadata. This also makes for easy expansion
to alternative filter implementations in new, alternative derived
classes. This change makes calls to FilterBitsReader::MayMatch
*necessarily* virtual because there's now more than one built-in
implementation. Compared with the previous implementation's extra
'if' checks in MayMatch, there's no consistent performance difference,
measured by (an older revision of) filter_bench (differences here seem
to be within noise):
Inside queries...
- Dry run (407) ns/op: 35.9996
+ Dry run (407) ns/op: 35.2034
- Single filter ns/op: 47.5483
+ Single filter ns/op: 47.4034
- Batched, prepared ns/op: 43.1559
+ Batched, prepared ns/op: 42.2923
...
- Random filter ns/op: 150.697
+ Random filter ns/op: 149.403
----------------------------
Outside queries...
- Dry run (980) ns/op: 34.6114
+ Dry run (980) ns/op: 34.0405
- Single filter ns/op: 56.8326
+ Single filter ns/op: 55.8414
- Batched, prepared ns/op: 48.2346
+ Batched, prepared ns/op: 47.5667
- Random filter ns/op: 155.377
+ Random filter ns/op: 153.942
Average FP rate %: 1.1386
Also, the FullFilterBitsReader ctor was responsible for a surprising
amount of CPU in production, due in part to inefficient determination of
the CACHE_LINE_SIZE used to construct the filter being read. The
overwhelming common case (same as my CACHE_LINE_SIZE) is now
substantially optimized, as shown with filter_bench with
-new_reader_every=1 (old option - see below) (repeatable result):
Inside queries...
- Dry run (453) ns/op: 118.799
+ Dry run (453) ns/op: 105.869
- Single filter ns/op: 82.5831
+ Single filter ns/op: 74.2509
...
- Random filter ns/op: 224.936
+ Random filter ns/op: 194.833
----------------------------
Outside queries...
- Dry run (aa1) ns/op: 118.503
+ Dry run (aa1) ns/op: 104.925
- Single filter ns/op: 90.3023
+ Single filter ns/op: 83.425
...
- Random filter ns/op: 220.455
+ Random filter ns/op: 175.7
Average FP rate %: 1.13886
However PR#5936 has/will reclaim most of this cost. After that PR, the optimization of this code path is likely negligible, but nonetheless it's clear we aren't making performance any worse.
Also fixed inadequate check of consistency between filter data size and
num_lines. (Unit test updated.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5941
Test Plan:
previously added unit tests FullBloomTest.CorruptFilters and
FullBloomTest.RawSchema
Differential Revision: D18018353
Pulled By: pdillinger
fbshipit-source-id: 8e04c2b4a7d93223f49a237fd52ef2483929ed9c
Summary:
Plain table SSTs could crash sst_dump because of a bug in
PlainTableReader that can leave table_properties_ as null. Even if it
was intended not to keep the table properties in some cases, they were
leaked on the offending code path.
Steps to reproduce:
$ db_bench --benchmarks=fillrandom --num=2000000 --use_plain_table --prefix-size=12
$ sst_dump --file=0000xx.sst --show_properties
from [] to []
Process /dev/shm/dbbench/000014.sst
Sst file format: plain table
Raw user collected properties
------------------------------
Segmentation fault (core dumped)
Also added missing unit testing of plain table full_scan_mode, and
an assertion in NewIterator to check for regression.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5940
Test Plan: new unit test, manual, make check
Differential Revision: D18018145
Pulled By: pdillinger
fbshipit-source-id: 4310c755e824c4cd6f3f86a3abc20dfa417c5e07
Summary:
In the current trace replay, all the queries are serialized and called by single threads. It may not simulate the original application query situations closely. The multi-threads replay is implemented in this PR. Users can set the number of threads to replay the trace. The queries generated according to the trace records are scheduled in the thread pool job queue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5934
Test Plan: test with make check and real trace replay.
Differential Revision: D17998098
Pulled By: zhichao-cao
fbshipit-source-id: 87eecf6f7c17a9dc9d7ab29dd2af74f6f60212c8
Summary:
expose db stress test by providing db_stress_tool.h in public header.
This PR does the following:
- adds a new header, db_stress_tool.h, in include/rocksdb/
- renames db_stress.cc to db_stress_tool.cc
- adds a db_stress.cc which simply invokes a test function.
- update Makefile accordingly.
Test Plan (dev server):
```
make db_stress
./db_stress
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5937
Differential Revision: D17997647
Pulled By: riversand963
fbshipit-source-id: 1a8d9994f89ce198935566756947c518f0052410
Summary:
The patch adds a new command line parameter --decode_blob_index to sst_dump.
If this switch is specified, sst_dump prints blob indexes in a human readable format,
printing the blob file number, offset, size, and expiration (if applicable) for blob
references, and the blob value (and expiration) for inlined blobs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5926
Test Plan:
Used db_bench's BlobDB mode to generate SST files containing blob references with
and without expiration, as well as inlined blobs with and without expiration (note: the
latter are stored as plain values), and confirmed sst_dump correctly prints all four types
of records.
Differential Revision: D17939077
Pulled By: ltamasi
fbshipit-source-id: edc5f58fee94ba35f6699c6a042d5758f5b3963d
Summary:
When there are concurrent flush job on the same CF, `OnFlushCompleted` can be called before the flush result being install to LSM. Fixing the issue by passing `FlushJobInfo` through `MemTable`, and the thread who commit the flush result can fetch the `FlushJobInfo` and fire `OnFlushCompleted` on behave of the thread actually writing the SST.
Fix https://github.com/facebook/rocksdb/issues/5892
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5908
Test Plan: Add new test. The test will fail without the fix.
Differential Revision: D17916144
Pulled By: riversand963
fbshipit-source-id: e18df67d9533b5baee52ae3605026cdeb05cbe10
Summary:
Without this PR, clang analyzer complains.
```
$USE_CLANG=1 make analyze
db/compaction/compaction_job_test.cc:161:20: warning: The left operand of '==' is a garbage value
if (key.type == kTypeBlobIndex) {
~~~~~~~~ ^
1 warning generated.
```
Test Plan (on devserver)
```
$USE_CLANG=1 make analyze
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5924
Differential Revision: D17923226
Pulled By: riversand963
fbshipit-source-id: 9d1eb769b5e0de7cb3d89dc90d1cfa895db7fdc8
Summary:
Currently, db_bench only supports PutWithTTL operations for BlobDB but
not regular Puts. The patch adds support for regular (non-TTL) Puts and also
changes the default for blob_db_max_ttl_range to zero, which corresponds
to no TTL.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5921
Test Plan:
make check
./db_bench -benchmarks=fillrandom -statistics -stats_interval_seconds=1
-duration=90 -num=500000 -use_blob_db=1 -blob_db_file_size=1000000
-target_file_size_base=1000000 (issues Put operations with no TTL)
./db_bench -benchmarks=fillrandom -statistics -stats_interval_seconds=1
-duration=90 -num=500000 -use_blob_db=1 -blob_db_file_size=1000000
-target_file_size_base=1000000 -blob_db_max_ttl_range=86400 (issues
PutWithTTL operations with random TTLs in the [0, blob_db_max_ttl_range)
interval, as before)
Differential Revision: D17919798
Pulled By: ltamasi
fbshipit-source-id: b946c3522b836b92b4c157ffbad24f92ba2b0a16
Summary:
This is groundwork for adding garbage collection support to BlobDB. The
patch adds logic that keeps track of the oldest blob file referred to by
each SST file. The oldest blob file is identified during flush/
compaction (similarly to how the range of keys covered by the SST is
identified), and persisted in the manifest as a custom field of the new
file edit record. Blob indexes with TTL are ignored for the purposes of
identifying the oldest blob file (since such blob files are cleaned up by the
TTL logic in BlobDB).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5903
Test Plan:
Added new unit tests; also ran db_bench in BlobDB mode, inspected the
manifest using ldb, and confirmed (by scanning the SST files using
sst_dump) that the value of the oldest blob file number field matches
the contents of the file for each SST.
Differential Revision: D17859997
Pulled By: ltamasi
fbshipit-source-id: 21662c137c6259a6af70446faaf3a9912c550e90
Levi Tamasi