Summary:
Move definition and implementation for ArenaWrappedDBIter into its own .h/.cc files. Also, change inlining of functions to better comply with the Google C++ style guide.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5801
Test Plan: make check
Differential Revision: D17371012
Pulled By: anand1976
fbshipit-source-id: c1361abc2851575111e357a63d88be3b3d6cb341
Summary:
DynamicBloom was being used both for memory-only and for on-disk filters, as part of the PlainTable format. To set up enhancements to the memtable Bloom filter, this splits the code into two copies and removes unused features from each copy. Adds test PlainTableDBTest.BloomSchema to ensure no accidental change to that format.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5767
Differential Revision: D17206963
Pulled By: pdillinger
fbshipit-source-id: 6cce8d55305ed0df051b4c58bdc98c8ad81d0553
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
Users may desire to specify extra dependencies via buck. This PR allows users to pass additional dependencies as a JSON object so that the buckifier script can generate TARGETS file with desired extra dependencies.
Test plan (on dev server)
```
$python buckifier/buckify_rocksdb.py '{"fake": {"extra_deps": [":test_dep", "//fakes/module:mock1"], "extra_compiler_flags": ["-DROCKSDB_LITE", "-Os"]}}'
Generating TARGETS
Extra dependencies:
{'': {'extra_compiler_flags': [], 'extra_deps': []}, 'test_dep1': {'extra_compiler_flags': ['-O2', '-DROCKSDB_LITE'], 'extra_deps': [':fake', '//dep1/mock']}}
Generated TARGETS Summary:
- 5 libs
- 0 binarys
- 296 tests
```
Verify the TARGETS file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5648
Differential Revision: D16565043
Pulled By: riversand963
fbshipit-source-id: a6ef02274174fcf159692d7b846e828454d01e89
Summary:
This PR implements cache eviction using reinforcement learning. It includes two implementations:
1. An implementation of Thompson Sampling for the Bernoulli Bandit [1].
2. An implementation of LinUCB with disjoint linear models [2].
The idea is that a cache uses multiple eviction policies, e.g., MRU, LRU, and LFU. The cache learns which eviction policy is the best and uses it upon a cache miss.
Thompson Sampling is contextless and does not include any features.
LinUCB includes features such as level, block type, caller, column family id to decide which eviction policy to use.
[1] Daniel J. Russo, Benjamin Van Roy, Abbas Kazerouni, Ian Osband, and Zheng Wen. 2018. A Tutorial on Thompson Sampling. Found. Trends Mach. Learn. 11, 1 (July 2018), 1-96. DOI: https://doi.org/10.1561/2200000070
[2] Lihong Li, Wei Chu, John Langford, and Robert E. Schapire. 2010. A contextual-bandit approach to personalized news article recommendation. In Proceedings of the 19th international conference on World wide web (WWW '10). ACM, New York, NY, USA, 661-670. DOI=http://dx.doi.org/10.1145/1772690.1772758
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5610
Differential Revision: D16435067
Pulled By: HaoyuHuang
fbshipit-source-id: 6549239ae14115c01cb1e70548af9e46d8dc21bb
Summary:
This test frequently times out under TSAN; parallelizing it should fix
this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5632
Test Plan:
make check
buck test mode/dev-tsan internal_repo_rocksdb/repo:db_bloom_filter_test
Differential Revision: D16519399
Pulled By: ltamasi
fbshipit-source-id: 66e05a644d6f79c6d544255ffcf6de195d2d62fe
Summary:
Make rocksdb build on macos:
1) Reorganize OS-specific flags and deps in rocksdb/src/TARGETS
2) Sandbox fbcode apple platform builds from repo root include path (which conflicts
with layout of rocksdb headers).
3) Fix dep-translation for bzip2.
Reviewed By: andrewjcg
Differential Revision: D15125826
fbshipit-source-id: 8e143c689b88b5727e54881a5e80500f879a320b
Summary:
The ObjectRegistry class replaces the Registrar and NewCustomObjects. Objects are registered with the registry by Type (the class must implement the static const char *Type() method).
This change is necessary for a few reasons:
- By having a class (rather than static template instances), the class can be passed between compilation units, meaning that objects could be registered and shared from a dynamic library with an executable.
- By having a class with instances, different units could have different objects registered. This could be useful if, for example, one Option allowed for a dynamic library and one did not.
When combined with some other PRs (being able to load shared libraries, a Configurable interface to configure objects to/from string), this code will allow objects in external shared libraries to be added to a RocksDB image at run-time, rather than requiring every new extension to be built into the main library and called explicitly by every program.
Test plan (on riversand963's devserver)
```
$COMPILE_WITH_ASAN=1 make -j32 all && sleep 1 && make check
```
All tests pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5293
Differential Revision: D16363396
Pulled By: riversand963
fbshipit-source-id: fbe4acb615bfc11103eef40a0b288845791c0180
Summary:
RocksDB has historically stored uncompression dictionary objects in the block
cache as opposed to storing just the block contents. This neccesitated
evicting the object upon table close. With the new code, only the raw blocks
are stored in the cache, eliminating the need for eviction.
In addition, the patch makes the following improvements:
1) Compression dictionary blocks are now prefetched/pinned similarly to
index/filter blocks.
2) A copy operation got eliminated when the uncompression dictionary is
retrieved.
3) Errors related to retrieving the uncompression dictionary are propagated as
opposed to silently ignored.
Note: the patch temporarily breaks the compression dictionary evicition stats.
They will be fixed in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5584
Test Plan: make asan_check
Differential Revision: D16344151
Pulled By: ltamasi
fbshipit-source-id: 2962b295f5b19628f9da88a3fcebbce5a5017a7b
Summary:
Refresh of the earlier change here - https://github.com/facebook/rocksdb/issues/5135
This is a review request for code change needed for - https://github.com/facebook/rocksdb/issues/3469
"Add support for taking snapshot of a column family and creating column family from a given CF snapshot"
We have an implementation for this that we have been testing internally. We have two new APIs that together provide this functionality.
(1) ExportColumnFamily() - This API is modelled after CreateCheckpoint() as below.
// Exports all live SST files of a specified Column Family onto export_dir,
// returning SST files information in metadata.
// - SST files will be created as hard links when the directory specified
// is in the same partition as the db directory, copied otherwise.
// - export_dir should not already exist and will be created by this API.
// - Always triggers a flush.
virtual Status ExportColumnFamily(ColumnFamilyHandle* handle,
const std::string& export_dir,
ExportImportFilesMetaData** metadata);
Internally, the API will DisableFileDeletions(), GetColumnFamilyMetaData(), Parse through
metadata, creating links/copies of all the sst files, EnableFileDeletions() and complete the call by
returning the list of file metadata.
(2) CreateColumnFamilyWithImport() - This API is modeled after IngestExternalFile(), but invoked only during a CF creation as below.
// CreateColumnFamilyWithImport() will create a new column family with
// column_family_name and import external SST files specified in metadata into
// this column family.
// (1) External SST files can be created using SstFileWriter.
// (2) External SST files can be exported from a particular column family in
// an existing DB.
// Option in import_options specifies whether the external files are copied or
// moved (default is copy). When option specifies copy, managing files at
// external_file_path is caller's responsibility. When option specifies a
// move, the call ensures that the specified files at external_file_path are
// deleted on successful return and files are not modified on any error
// return.
// On error return, column family handle returned will be nullptr.
// ColumnFamily will be present on successful return and will not be present
// on error return. ColumnFamily may be present on any crash during this call.
virtual Status CreateColumnFamilyWithImport(
const ColumnFamilyOptions& options, const std::string& column_family_name,
const ImportColumnFamilyOptions& import_options,
const ExportImportFilesMetaData& metadata,
ColumnFamilyHandle** handle);
Internally, this API creates a new CF, parses all the sst files and adds it to the specified column family, at the same level and with same sequence number as in the metadata. Also performs safety checks with respect to overlaps between the sst files being imported.
If incoming sequence number is higher than current local sequence number, local sequence
number is updated to reflect this.
Note, as the sst files is are being moved across Column Families, Column Family name in sst file
will no longer match the actual column family on destination DB. The API does not modify Column
Family name or id in the sst files being imported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5495
Differential Revision: D16018881
fbshipit-source-id: 9ae2251025d5916d35a9fc4ea4d6707f6be16ff9
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
Summary:
This PR adds a ghost cache for admission control. Specifically, it admits an entry on its second access.
It also adds a hybrid row-block cache that caches the referenced key-value pairs of a Get/MultiGet request instead of its blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5534
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32
Differential Revision: D16101124
Pulled By: HaoyuHuang
fbshipit-source-id: b99edda6418a888e94eb40f71ece45d375e234b1
Summary:
Current PosixLogger performs IO operations using posix calls. Thus the
current implementation will not work for non-posix env. Created a new
logger class EnvLogger that uses env specific WritableFileWriter for IO operations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5491
Test Plan: make check
Differential Revision: D15909002
Pulled By: ggaurav28
fbshipit-source-id: 13a8105176e8e42db0c59798d48cb6a0dbccc965
Summary:
This PR creates cache_simulator.h file. It contains a CacheSimulator that runs against a block cache trace record. We can add alternative cache simulators derived from CacheSimulator later. For example, this PR adds a PrioritizedCacheSimulator that inserts filter/index/uncompressed dictionary blocks with high priority.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5517
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32
Differential Revision: D16043689
Pulled By: HaoyuHuang
fbshipit-source-id: 65f28ed52b866ffb0e6eceffd7f9ca7c45bb680d
Summary:
This PR continues the work in https://github.com/facebook/rocksdb/pull/4748 and https://github.com/facebook/rocksdb/pull/4535 by adding a new DBOption `persist_stats_to_disk` which instructs RocksDB to persist stats history to RocksDB itself. When statistics is enabled, and both options `stats_persist_period_sec` and `persist_stats_to_disk` are set, RocksDB will periodically write stats to a built-in column family in the following form: key -> (timestamp in microseconds)#(stats name), value -> stats value. The existing API `GetStatsHistory` will detect the current value of `persist_stats_to_disk` and either read from in-memory data structure or from the hidden column family on disk.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5046
Differential Revision: D15863138
Pulled By: miasantreble
fbshipit-source-id: bb82abdb3f2ca581aa42531734ac799f113e931b
Summary:
When run under TSAN it sometimes goes over 10m and times out. The slowest ones are `DBBloomFilterTestWithParam.BloomFilter` which we have 6 of them. Making the tests run in parallel should take care of the timeout issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5467
Differential Revision: D15856912
Pulled By: maysamyabandeh
fbshipit-source-id: 26c43c55312974c1b809c070342dee037d0219f4
Summary:
This PR integrates the block cache tracer class into db_impl.cc.
db_impl.cc contains a member variable of AtomicBlockCacheTraceWriter class and passes its reference to the block_based_table_reader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5433
Differential Revision: D15728016
Pulled By: HaoyuHuang
fbshipit-source-id: 23d5659e8c82d556833dcc1a5558aac8c1f7db71
Summary:
This change adds a Dynamic Library class to the RocksDB Env. Dynamic libraries are populated via the Env::LoadLibrary method.
The addition of dynamic library support allows for a few different features to be developed:
1. The compression code can be changed to use dynamic library support. This would allow RocksDB to determine at run-time what compression packages were installed. This change would eliminate the need to make sure the build-time and run-time environment had the same library set. It would also simplify some of the Java build issues (where it attempts to build and include various packages inside the RocksDB jars).
2. Along with other features (to be provided in a subsequent PR), this change would allow code/configurations to be added to RocksDB at run-time. For example, the build system includes code for building an "rados" environment and adding "Cassandra" features. Instead of these extensions being built into the base RocksDB code, these extensions could be loaded at run-time as required/appropriate, either by configuration or explicitly.
We intend to push out other changes in support of the extending RocksDB at run-time via configurations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5281
Differential Revision: D15447613
Pulled By: riversand963
fbshipit-source-id: 452cd4f54511c0bceee18f6d9d919aae9fd25fef
Summary:
util/ means for lower level libraries. trace_replay is highly integrated to DB and sometimes call DB. Move it out to a separate directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5376
Differential Revision: D15550938
Pulled By: siying
fbshipit-source-id: f46dce5ceffdc05a73f26379c7bb1b79ebe6c207
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
In order to improve code readability, this PR moves LevelCompactionBuilder and LevelCompactionPicker to compaction_picker_level.h and .cc
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5369
Differential Revision: D15540172
Pulled By: miasantreble
fbshipit-source-id: c1a578b93f127cd63661b53f32b356e6edd349af
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375
Differential Revision: D15550935
Pulled By: siying
fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
Summary:
This PR allows RocksDB to run in single-primary, multi-secondary process mode.
The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary.
Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`.
This PR has several components:
1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary.
2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue.
3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`.
3.1 Tail the primary's MANIFEST during recovery.
3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`.
3.3 Tailing WAL will be in a future PR.
4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899
Differential Revision: D14510945
Pulled By: riversand963
fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
Summary:
This PR adds public `GetStatsHistory` API to retrieve stats history in the form of an std map. The key of the map is the timestamp in microseconds when the stats snapshot is taken, the value is another std map from stats name to stats value (stored in std string). Two DBOptions are introduced: `stats_persist_period_sec` (default 10 minutes) controls the intervals between two snapshots are taken; `max_stats_history_count` (default 10) controls the max number of history snapshots to keep in memory. RocksDB will stop collecting stats snapshots if `stats_persist_period_sec` is set to 0.
(This PR is the in-memory part of https://github.com/facebook/rocksdb/pull/4535)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4748
Differential Revision: D13961471
Pulled By: miasantreble
fbshipit-source-id: ac836d401ecb84ea92216bf9966f969dedf4ad04
Summary:
as title. For people who continue to need Lua compaction filter, you
can copy the include/rocksdb/utilities/rocks_lua/lua_compaction_filter.h and
utilities/lua/rocks_lua_compaction_filter.cc to your own codebase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4971
Differential Revision: D14047468
Pulled By: riversand963
fbshipit-source-id: 9ad1a6484a7c94e478f1e108127a3184e4069f70
Summary:
Cuckoo Hash is less useful than we initially expected. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4953
Differential Revision: D13979264
Pulled By: siying
fbshipit-source-id: 2a60afdaa989f045357398b43a1cc5d46f4492ed
Summary:
- If block cache disabled or not used for meta-blocks, `BlockBasedTableReader::Rep::uncompression_dict` owns the `UncompressionDict`. It is preloaded during `PrefetchIndexAndFilterBlocks`.
- If block cache is enabled and used for meta-blocks, block cache owns the `UncompressionDict`, which holds dictionary and digested dictionary when needed. It is never prefetched though there is a TODO for this in the code. The cache key is simply the compression dictionary block handle.
- New stats for compression dictionary accesses in block cache: "BLOCK_CACHE_COMPRESSION_DICT_*" and "compression_dict_block_read_count"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4881
Differential Revision: D13663801
Pulled By: ajkr
fbshipit-source-id: bdcc54044e180855cdcc57639b493b0e016c9a3f
Summary:
Remove some components that we never heard people using them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4101
Differential Revision: D8825431
Pulled By: siying
fbshipit-source-id: 97a12ad3cad4ab12c82741a5ba49669aaa854180
Summary:
Declare Jemalloc non-standard APIs as weak symbols, so that if Jemalloc is linked with the binary, these symbols will be replaced by Jemalloc's, otherwise they will be nullptr. This is similar to how folly detect jemalloc, but we assume the main program use jemalloc as long as jemalloc is linked: https://github.com/facebook/folly/blob/master/folly/memory/Malloc.h#L147
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4844
Differential Revision: D13574934
Pulled By: yiwu-arbug
fbshipit-source-id: 7ea871beb1be7d5a1259cc38f9b78078793db2db
Summary:
Now that v2 is fully functional, the v1 aggregator is removed.
The v2 aggregator has been renamed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4778
Differential Revision: D13495930
Pulled By: abhimadan
fbshipit-source-id: 9d69500a60a283e79b6c4fa938fc68a8aa4d40d6
Summary:
The PR is targeting to resolve the issue of:
https://github.com/facebook/rocksdb/issues/3972#issue-330771918
We have a rocksdb created with leveled-compaction with multiple column families (CFs), some of CFs are using HDD to store big and less frequently accessed data and others are using SSD.
When there are continuously write traffics going on to all CFs, the compaction thread pool is mostly occupied by those slow HDD compactions, which blocks fully utilize SSD bandwidth.
Since atomic write and transaction is needed across CFs, so splitting it to multiple rocksdb instance is not an option for us.
With the compaction thread control, we got 30%+ HDD write throughput gain, and also a lot smooth SSD write since less write stall happening.
ConcurrentTaskLimiter can be shared with multi-CFs across rocksdb instances, so the feature does not only work for multi-CFs scenarios, but also for multi-rocksdbs scenarios, who need disk IO resource control per tenant.
The usage is straight forward:
e.g.:
//
// Enable compaction thread limiter thru ColumnFamilyOptions
//
std::shared_ptr<ConcurrentTaskLimiter> ctl(NewConcurrentTaskLimiter("foo_limiter", 4));
Options options;
ColumnFamilyOptions cf_opt(options);
cf_opt.compaction_thread_limiter = ctl;
...
//
// Compaction thread limiter can be tuned or disabled on-the-fly
//
ctl->SetMaxOutstandingTask(12); // enlarge to 12 tasks
...
ctl->ResetMaxOutstandingTask(); // disable (bypass) thread limiter
ctl->SetMaxOutstandingTask(-1); // Same as above
...
ctl->SetMaxOutstandingTask(0); // full throttle (0 task)
//
// Sharing compaction thread limiter among CFs (to resolve multiple storage perf issue)
//
std::shared_ptr<ConcurrentTaskLimiter> ctl_ssd(NewConcurrentTaskLimiter("ssd_limiter", 8));
std::shared_ptr<ConcurrentTaskLimiter> ctl_hdd(NewConcurrentTaskLimiter("hdd_limiter", 4));
Options options;
ColumnFamilyOptions cf_opt_ssd1(options);
ColumnFamilyOptions cf_opt_ssd2(options);
ColumnFamilyOptions cf_opt_hdd1(options);
ColumnFamilyOptions cf_opt_hdd2(options);
ColumnFamilyOptions cf_opt_hdd3(options);
// SSD CFs
cf_opt_ssd1.compaction_thread_limiter = ctl_ssd;
cf_opt_ssd2.compaction_thread_limiter = ctl_ssd;
// HDD CFs
cf_opt_hdd1.compaction_thread_limiter = ctl_hdd;
cf_opt_hdd2.compaction_thread_limiter = ctl_hdd;
cf_opt_hdd3.compaction_thread_limiter = ctl_hdd;
...
//
// The limiter is disabled by default (or set to nullptr explicitly)
//
Options options;
ColumnFamilyOptions cf_opt(options);
cf_opt.compaction_thread_limiter = nullptr;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4332
Differential Revision: D13226590
Pulled By: siying
fbshipit-source-id: 14307aec55b8bd59c8223d04aa6db3c03d1b0c1d
Summary:
Don't enable ROCKSDB_JEMALLOC unless the build mode is opt and default
allocator is jemalloc. In dev mode, this is causing compile/link errors such as -
```
stderr: buck-out/dev/gen/rocksdb/src/rocksdb_lib#compile-pic-malloc_stats.cc.o4768b59e,gcc-5-glibc-2.23-clang/db/malloc_stats.cc.o:malloc_stats.cc:function rocksdb::DumpMallocStats(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >*): error: undefined reference to 'malloc_stats_print'
clang-7.0: error: linker command failed with exit code 1
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4747
Differential Revision: D13324840
Pulled By: anand1976
fbshipit-source-id: 45ffbd4f63fe4d9e8a0473d8f066155e4ef64a14
Summary:
**Summary:**
Simplified the code layout by moving FIFOCompactionPicker to a separate file.
**Why?:**
While trying to add ttl functionality to universal compaction, I found that `FIFOCompactionPicker` class and its impl methods to be interspersed between `LevelCompactionPicker` methods which kind-of made the code a little hard to traverse. So I moved `FIFOCompactionPicker` to a separate compaction_picker_fifo.h/cc file, similar to `UniversalCompactionPicker`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4724
Differential Revision: D13227914
Pulled By: sagar0
fbshipit-source-id: 89471766ea67fa4d87664a41c057dd7df4b3d4e3
Summary:
A user friendly sst file reader is useful when we want to access sst
files outside of RocksDB. For example, we can generate an sst file
with SstFileWriter and send it to other places, then use SstFileReader
to read the file and process the entries in other ways.
Also rename the original SstFileReader to SstFileDumper because of
name conflict, and seems SstFileDumper is more appropriate for tools.
TODO: there is only a very simple test now, because I want to get some feedback first.
If the changes look good, I will add more tests soon.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4717
Differential Revision: D13212686
Pulled By: ajkr
fbshipit-source-id: 737593383264c954b79e63edaf44aaae0d947e56
Summary:
The old RangeDelAggregator did expensive pre-processing work
to create a collapsed, binary-searchable representation of range
tombstones. With FragmentedRangeTombstoneIterator, much of this work is
now unnecessary. RangeDelAggregatorV2 takes advantage of this by seeking
in each iterator to find a covering tombstone in ShouldDelete, while
doing minimal work in AddTombstones. The old RangeDelAggregator is still
used during flush/compaction for now, though RangeDelAggregatorV2 will
support those uses in a future PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4649
Differential Revision: D13146964
Pulled By: abhimadan
fbshipit-source-id: be29a4c020fc440500c137216fcc1cf529571eb3
Summary:
Introduce `JemallocNodumpAllocator`, which allow exclusion of block cache usage from core dump. It utilize custom hook of jemalloc arena, and when jemalloc arena request memory from system, the allocator use the hook to set `MADV_DONTDUMP ` to the memory. The implementation is basically the same as `folly::JemallocNodumpAllocator`, except for some minor difference:
1. It only support jemalloc >= 5.0
2. When the allocator destruct, it explicitly destruct the corresponding arena via `arena.<i>.destroy` via `mallctl`.
Depending on #4502.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4534
Differential Revision: D10435474
Pulled By: yiwu-arbug
fbshipit-source-id: e80edea755d3853182485d2be710376384ce0bb4
Summary:
Previously, range tombstones were accumulated from every level, which
was necessary if a range tombstone in a higher level covered a key in a lower
level. However, RangeDelAggregator::AddTombstones's complexity is based on
the number of tombstones that are currently stored in it, which is wasteful in
the Get case, where we only need to know the highest sequence number of range
tombstones that cover the key from higher levels, and compute the highest covering
sequence number at the current level. This change introduces this optimization, and
removes the use of RangeDelAggregator from the Get path.
In the benchmark results, the following command was used to initialize the database:
```
./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8
```
...and the following command was used to measure read throughput:
```
./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32
```
The filluniquerandom command was only run once, and the resulting database was used
to measure read performance before and after the PR. Both binaries were compiled with
`DEBUG_LEVEL=0`.
Readrandom results before PR:
```
readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found)
```
Readrandom results after PR:
```
readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found)
```
So it's actually slower right now, but this PR paves the way for future optimizations (see #4493).
----
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449
Differential Revision: D10370575
Pulled By: abhimadan
fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
Summary:
Set the macro if default allocator is jemalloc. It doesn't handle the case when allocator is specified, e.g.
```
cpp_binary(
name="xxx"
allocator="jemalloc", # or "malloc" or something else
deps=["//rocksdb:rocksdb"],
)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4489
Differential Revision: D10363683
Pulled By: yiwu-arbug
fbshipit-source-id: 5da490336a8e78e0feb0900c29e8036e7ec6f12b
Summary:
Introduce `RepeatableThread` utility to run task periodically in a separate thread. It is basically the same as the the same class in fbcode, and in addition provide a helper method to let tests mock time and trigger execution one at a time.
We can use this class to replace `TimerQueue` in #4382 and `BlobDB`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4423
Differential Revision: D10020932
Pulled By: yiwu-arbug
fbshipit-source-id: 3616bef108c39a33c92eedb1256de424b7c04087
Summary:
To measure the results of upcoming DeleteRange v2 work, this commit adds
simple benchmarks for RangeDelAggregator. It measures the average time
for AddTombstones and ShouldDelete calls.
Using this to compare the results before #4014 and on the latest master (using the default arguments) produces the following results:
Before #4014:
```
=======================
Results:
=======================
AddTombstones: 1356.28 us
ShouldDelete: 0.401732 us
```
Latest master:
```
=======================
Results:
=======================
AddTombstones: 740.82 us
ShouldDelete: 0.383271 us
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4363
Differential Revision: D9881676
Pulled By: abhimadan
fbshipit-source-id: 793e7d61aa4b9d47eb917bbcc03f08695b5e5442
