Summary:
Changed dynamic leveling to stop setting the base level's size bound below `max_bytes_for_level_base`.
Behavior for config where `max_bytes_for_level_base == level0_file_num_compaction_trigger * write_buffer_size` and same amount of data in L0 and base-level:
- Before #2027, compaction scoring would favor base-level due to dividing by size smaller than `max_bytes_for_level_base`.
- After #2027, L0 and Lbase get equal scores. The disadvantage is L0 is often compacted before reaching the num files trigger since `write_buffer_size` can be bigger than the dynamically chosen base-level size. This increases write-amp.
- After this diff, L0 and Lbase still get equal scores. Now it takes `level0_file_num_compaction_trigger` files of size `write_buffer_size` to trigger L0 compaction by size, fixing the write-amp problem above.
Closes https://github.com/facebook/rocksdb/pull/2123
Differential Revision: D4861570
Pulled By: ajkr
fbshipit-source-id: 467ddef56ed1f647c14d86bb018bcb044c39b964
Summary:
Makes max_open_files db option dynamically set-able by SetDBOptions. During the call of SetDBOptions we call SetCapacity on the table cache, which is a LRUCache.
Closes https://github.com/facebook/rocksdb/pull/2185
Differential Revision: D4979189
Pulled By: yiwu-arbug
fbshipit-source-id: ca7e8dc5e3619c79434f579be4847c0f7e56afda
Summary:
The goal is to avoid the problem of small number of L0 files triggering compaction to base level (which increased write-amp), while still allowing L0 compaction-by-size (so intra-L0 compactions cause score to increase).
Closes https://github.com/facebook/rocksdb/pull/2172
Differential Revision: D4908552
Pulled By: ajkr
fbshipit-source-id: 4b170142b2b368e24bd7948b2a6f24c69fabf73d
Summary:
Replace Options::use_direct_writes with Options::use_direct_io_for_flush_and_compaction
Now if Options::use_direct_io_for_flush_and_compaction = true, we will enable direct io for both reads and writes for flush and compaction job. Whereas Options::use_direct_reads controls user reads like iterator and Get().
Closes https://github.com/facebook/rocksdb/pull/2117
Differential Revision: D4860912
Pulled By: lightmark
fbshipit-source-id: d93575a8a5e780cf7e40797287edc425ee648c19
Summary:
This is an effort to club all string related utility functions into one common place, in string_util, so that it is easier for everyone to know what string processing functions are available. Right now they seem to be spread out across multiple modules, like logging and options_helper.
Check the sub-commits for easier reviewing.
Closes https://github.com/facebook/rocksdb/pull/2094
Differential Revision: D4837730
Pulled By: sagar0
fbshipit-source-id: 344278a
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
Level-based L0->L0 compaction operates on spans of files that aren't currently being compacted. It reduces the number of L0 files, thus making write stall conditions harder to reach.
- L0->L0 is triggered when base level is unavailable due to pending compactions
- L0->L0 always outputs one file of at most `max_level0_burst_file_size` bytes.
- Subcompactions are disabled for L0->L0 since we want to output one file.
- Input files are chosen as the longest span of available files that will fit within the size limit. This minimizes number of files in L0.
Closes https://github.com/facebook/rocksdb/pull/2027
Differential Revision: D4760318
Pulled By: ajkr
fbshipit-source-id: 9d07183
Summary:
It is confusing to have auto_roll_logger to stay under db/, which has nothing to do with database. Move filename together as it is a dependency.
Closes https://github.com/facebook/rocksdb/pull/2080
Differential Revision: D4821141
Pulled By: siying
fbshipit-source-id: ca7d768
Summary:
PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the
user. This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
value 100 byte: 1.8% regular, 1.2% merge values
value 1k byte: 11.5% regular, 7.5% merge values
value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756
Differential Revision: D4391738
Pulled By: maysamyabandeh
fbshipit-source-id: 6f3edd3
Summary:
…action
The two options, min_partial_merge_operands and verify_checksums_in_compaction, are not seldom used. Remove them to reduce the total number of options. Also remove them from Java and C interface.
Closes https://github.com/facebook/rocksdb/pull/1902
Differential Revision: D4601219
Pulled By: siying
fbshipit-source-id: aad4cb2
Summary:
reimplement the compaction expansion on lower level.
Considering such a case:
input level file: 1[B E] 2[F G] 3[H I] 4 [J M]
output level file: 5[A C] 6[D K] 7[L O]
If we initially pick file 2, now we will compact file 2 and 6. But we can safely compact 2, 3 and 6 without expanding the output level.
The previous code is messy and wrong.
In this diff, I first determine the input range [a, b], and output range [c, d],
then we get the range [e,f] = [min(a, c), max(b, d] and put all eligible clean-cut files within [e, f] into this compaction.
**Note: clean-cut means the files don't have the same user key on the boundaries of some files that are not chosen in this compaction**.
Closes https://github.com/facebook/rocksdb/pull/1760
Differential Revision: D4395564
Pulled By: lightmark
fbshipit-source-id: 2dc2c5c
Summary:
fix lite bugs
disable direct io in lite mode
Closes https://github.com/facebook/rocksdb/pull/1870
Differential Revision: D4559866
Pulled By: yiwu-arbug
fbshipit-source-id: 3761c51
Summary:
Remove disableDataSync, and another similarly named disable_data_sync options.
This is being done to simplify options, and also because the performance gains of this feature can be achieved by other methods.
Closes https://github.com/facebook/rocksdb/pull/1859
Differential Revision: D4541292
Pulled By: sagar0
fbshipit-source-id: 5b3a6ca
Summary:
merger.h was always a confusing name for me, simply give the file a better name
Closes https://github.com/facebook/rocksdb/pull/1836
Differential Revision: D4505357
Pulled By: IslamAbdelRahman
fbshipit-source-id: 07b28d8
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
1. value 100 byte: 1.8% regular, 1.2% merge values
2. value 1k byte: 11.5% regular, 7.5% merge values
3. value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732
Differential Revision: D4374613
Pulled By: maysamyabandeh
fbshipit-source-id: a077f1a
Summary:
Previously we used TableCache::NewIterator() for multiple purposes (data
block iterator and range deletion iterator), and returned non-ok status in
the data block iterator. In one case where the caller only used the range
deletion block iterator (9e7cf3469b/db/version_set.cc (L965-L973)),
we didn't check/free the data block iterator containing non-ok status, which
caused a valgrind error.
So, this diff decouples creation of data block and range deletion block iterators,
and updates the callers accordingly. Both functions can return non-ok status
in an InternalIterator. Since the non-ok status is returned in an iterator that the
callers will definitely use, it should be more usable/less error-prone.
Closes https://github.com/facebook/rocksdb/pull/1513
Differential Revision: D4181423
Pulled By: ajkr
fbshipit-source-id: 835b8f5
Summary:
Note: reviewed in https://reviews.facebook.net/D65115
- DBIter maintains a range tombstone accumulator. We don't cleanup obsolete tombstones yet, so if the user seeks back and forth, the same tombstones would be added to the accumulator multiple times.
- DBImpl::NewInternalIterator() (used to make DBIter's underlying iterator) adds memtable/L0 range tombstones, L1+ range tombstones are added on-demand during NewSecondaryIterator() (see D62205)
- DBIter uses ShouldDelete() when advancing to check whether keys are covered by range tombstones
Closes https://github.com/facebook/rocksdb/pull/1464
Differential Revision: D4131753
Pulled By: ajkr
fbshipit-source-id: be86559
Summary:
During Get()/MultiGet(), build up a RangeDelAggregator with range
tombstones as we search through live memtable, immutable memtables, and
SST files. This aggregator is then used by memtable.cc's SaveValue() and
GetContext::SaveValue() to check whether keys are covered.
added tests for Get on memtables/files; end-to-end tests mainly in https://reviews.facebook.net/D64761
Closes https://github.com/facebook/rocksdb/pull/1456
Differential Revision: D4111271
Pulled By: ajkr
fbshipit-source-id: 6e388d4
Summary:
Changes in the diff
API changes:
- Introduce IngestExternalFile to replace AddFile (I think this make the API more clear)
- Introduce IngestExternalFileOptions (This struct will encapsulate the options for ingesting the external file)
- Deprecate AddFile() API
Logic changes:
- If our file overlap with the memtable we will flush the memtable
- We will find the first level in the LSM tree that our file key range overlap with the keys in it
- We will find the lowest level in the LSM tree above the the level we found in step 2 that our file can fit in and ingest our file in it
- We will assign a global sequence number to our new file
- Remove AddFile restrictions by using global sequence numbers
Other changes:
- Refactor all AddFile logic to be encapsulated in ExternalSstFileIngestionJob
Test Plan:
unit tests (still need to add more)
addfile_stress (https://reviews.facebook.net/D65037)
Reviewers: yiwu, andrewkr, lightmark, yhchiang, sdong
Reviewed By: sdong
Subscribers: jkedgar, hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65061
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
Summary:
We always run consistency checks when compiling in debug mode
allow users to set Options::force_consistency_checks to true to be able to run such checks even when compiling in release mode
Test Plan:
make check -j64
make release
Reviewers: lightmark, sdong, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64701
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()
Also add tests in db_iter_test and db_iterator_test
Pass all tests
Cheers!
Test Plan: make all check -j64
Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64149
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary:
* Change constructor of MutableCFOptions to depends only on ColumnFamilyOptions.
* Move `max_subcompactions`, `compaction_options_fifo` and `compaction_pri` to ImmutableCFOptions to make it clear that they are immutable.
Test Plan: existing unit tests.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63945
Summary: In T8216281 we decided to disable prefetching the index and filter during opening table handlers during startup (max_open_files = -1).
Test Plan: Rely on `IndexAndFilterBlocksOfNewTableAddedToCache` to guarantee L0 indexes and filters are still cached and change `PinL0IndexAndFilterBlocksTest` to make sure other levels are not cached (maybe add one more test to test we don't cache other levels?)
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59913
* Added new statistics and refactored to allow ioptions to be passed around as required to access environment and statistics pointers (and, as a convenient side effect, info_log pointer).
* Prevent incrementing compression counter when compression is turned off in options.
* Prevent incrementing compression counter when compression is turned off in options.
* Added two more supported compression types to test code in db_test.cc
* Prevent incrementing compression counter when compression is turned off in options.
* Added new StatsLevel that excludes compression timing.
* Fixed casting error in coding.h
* Fixed CompressionStatsTest for new StatsLevel.
* Removed unused variable that was breaking the Linux build
Summary: MyRocks release integration build breaks because we treat warnings caused by unused variables as errors. Variable `edit` is only used in debug builds. Therefore we need to guard it using `#ifndef NDEBUG` check.
Test Plan:
- `[p]arc diff --preview` for the default validation.
- Verify that release build fails before this fix and passes after applying it.
Reviewers: andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60423
Summary: Add option write_buffer_manager to help users control total memory spent on memtables across multiple DB instances.
Test Plan: Add a new unit test.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: adela, benj, sumeet, muthu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59925
Summary:
We have alot of code duplication whenever we call FullMerge we keep duplicating the instrumentation and statistics code
This is a simple diff to refactor the code to use TimedFullMerge instead of FullMerge
Test Plan: COMPILE_WITH_ASAN=1 make check -j64
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59577
Summary: Make CompactionOptionsFIFO a part of mutable_cf_options
Test Plan: UT
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, lgalanis, dhruba
Differential Revision: https://reviews.facebook.net/D58653
Summary:
GetObsoleteFiles() and LogAndApply() functions modify obsolete_manifests_ vector
we need to make sure that the mutex is held when we modify the obsolete_manifests_
Test Plan: run the test under TSAN
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58011
Summary: Currently we estimate bytes needed for compaction by assuming fanout value to be level multiplier. It overestimates when size of a level exceeds the target by large. We estimate by the ratio of actual sizes in levels instead.
Test Plan: Fix existing test cases and add a new one.
Reviewers: IslamAbdelRahman, igor, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57789
Summary:
This is needed so we can measure compression ratio improvements
achieved by D52287.
The property compares raw data size against the total file size for a given
level. If the level is empty it should return 0.0.
Test Plan: new unit test
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56967
Summary: We use object `v` in the error message, which is not initialized if the edit is column family manipulation. This doesn't provide much useful info, so this diff is removing it. Instead, it dumps actual VersionEdit contents.
Test Plan: compiles. would be great to get tests in version_set_test.cc that cover cases where a file write fails
Reviewers: sdong, yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56349
Summary:
There is a hardcoded constraint in our statistics collection that prevents reading properties from more than 20 SST files. This means our statistics will be very inaccurate for databases with > 20 files since additional files are just ignored. The purpose of constraining the number of files used is to bound the I/O performed during statistics collection, since these statistics need to be recomputed every time the database reopened.
However, this constraint doesn't take into account the case where option "max_open_files" is -1. In that case, all the file metadata has already been read, so MaybeInitializeFileMetaData() won't incur any I/O cost. so this diff gets rid of the 20-file constraint in case max_open_files == -1.
Test Plan:
write into unit test db/db_properties_test.cc - "ValidateSampleNumber".
We generate 20 files with 2 rows and 10 files with 1 row.
If max_open_files !=-1, the `rocksdb.estimate-num-keys` should be (10*1 + 10*2)/20 * 30 = 45. Otherwise, it should be the ground truth, 50.
{F1089153}
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56253
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
Summary: We were not measuring the time spent in merge_operator when called from Version::Get()
Test Plan: added a unittest
Reviewers: sdong, yhchiang
Reviewed By: yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55905
Summary:
When subcompaction is used, all subcompactions share the same Compaction
pointer in CompactionJob while each subcompaction all keeps their mutable
stats in SubcompactionState. However, there're still some mutable part
that is currently store in the shared Compaction pointer.
This patch makes two changes:
1. Make the shared Compaction pointer const so that it can never be modified
during the compaction.
2. Move necessary states from Compaction to SubcompactionState.
3. Make functions of Compaction const if the function does not modify
its internal state.
Test Plan: rocksdb and MyRocks test
Reviewers: sdong, kradhakrishnan, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, yoshinorim, gunnarku, leveldb
Differential Revision: https://reviews.facebook.net/D55923
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
When the table reader is destroyed, it releases the pinned blocks (if there were any). This has to happen before the cache is destroyed, so I had to introduce a TableReader::Close(), to guarantee the order of destruction.
Test Plan:
Added two unit tests for this. Existing unit tests run fine (default is pin_l0_filter_and_index_blocks_in_cache=false).
DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32
Mac: OK.
Linux: with D55287 patched in it's OK.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54801
Summary:
- Keep track of obsolete manifests in VersionSet
- Updated FindObsoleteFiles() to put obsolete manifests in the JobContext for later use by PurgeObsoleteFiles()
- Added test case that verifies a stale manifest is deleted by a non-full purge
Test Plan:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
Reviewers: IslamAbdelRahman, yoshinorim, sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D55269
Summary:
Fixed two related race conditions in backup creation.
(1) CreateNewBackup() uses DB::DisableFileDeletions() to prevent table files
from being deleted while it is copying; however, the MANIFEST file could still
rotate during this time. The fix is to stop deleting the old manifest in the
rotation logic. It will be deleted safely later when PurgeObsoleteFiles() runs
(can only happen when file deletions are enabled).
(2) CreateNewBackup() did not account for the CURRENT file being mutable.
This is significant because the files returned by GetLiveFiles() contain a
particular manifest filename, but the manifest to which CURRENT refers can
change at any time. This causes problems when CURRENT changes between the call
to GetLiveFiles() and when it's copied to the backup directory. To workaround this, I
manually forge a CURRENT file referring to the manifest filename returned in
GetLiveFiles().
(2) also applies to the checkpointing code, so let me know if this approach is
good and I'll make the same change there.
Test Plan:
new test for roll manifest during backup creation.
running the test before this change:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
...
IO error: /tmp/rocksdbtest-9383/backupable_db/MANIFEST-000001: No such file or directory
running the test after this change:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
...
[ RUN ] BackupableDBTest.ChangeManifestDuringBackupCreation
[ OK ] BackupableDBTest.ChangeManifestDuringBackupCreation (2836 ms)
Reviewers: IslamAbdelRahman, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54711
Summary:
Add a new compaction priority as following:
For every file, we calculate total size of files overalapping with the file in the next level, over the file's size itself. The file with smallest ratio will be picked first.
My "db_bench --fillrandom" shows about 5% less compaction than kOldestSmallestSeqFirst if --hard_pending_compaction_bytes_limit value to keep LSM tree in shape. If not limiting hard_pending_compaction_bytes_limit, improvement is only 1% or 2%.
Test Plan: Add a unit test
Reviewers: andrewkr, kradhakrishnan, anthony, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54075
Summary:
Following up on D53493, we can still enable the filter-skipping
optimization for last file in L0. It's correct to assume the key will be present
in the last L0 file when we're hit-optimized and L0 is deepest.
The FilePicker encapsulates the state for traversing each level's files, so I
needed to make it expose whether the returned file is last in its level.
Test Plan:
verified below test fails before this patch and passes afterwards.
The change to how the test memtable is populated is needed so file 1 has keys
(0, 30, 60), file 2 has keys (10, 40, 70), etc.
$ ./db_universal_compaction_test --gtest_filter=UniversalCompactionNumLevels/DBTestUniversalCompaction.OptimizeFiltersForHits/*
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53583
Summary: It's a regression bug caused by e089db40f9. With the change, if options.optimize_filters_for_hits=true and there are only L0 files (like single level universal compaction), we skip all the files in L0, which is more than necessary. Fix it by always trying to query bloom filter for files in level 0.
Test Plan: Add a unit test for it.
Reviewers: anthony, rven, yhchiang, IslamAbdelRahman, kradhakrishnan, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53493
Summary: Revert the functionaility of D7809 (but I'm keeping the logging and test code). We decided it was dangerous to ignore sync failures based on attempting to read the data written. The read does not tell us whether the data was synced.
Test Plan: There was no test for the particular functionaility that was reverted. Keeping the test code from D7809 that tests whether we set the DB to be readonly when paranoid checks are enabled.
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52989
Summary: That line used to dereference `column_family_data`, which is nullptr if we're creating a column family.
Test Plan: `make -j check`
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52881
Summary: It's usually hard for users to set a value of options.delayed_write_rate. With this diff, after slowdown condition triggers, we greedily reduce write rate if estimated pending compaction bytes increase. If estimated compaction pending bytes drop, we increase the write rate.
Test Plan:
Add a unit test
Test with db_bench setting:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -num=10000000 --soft_pending_compaction_bytes_limit=1000000000 --hard_pending_compaction_bytes_limit=3000000000 --delayed_write_rate=100000000
and make sure without the commit, write stop will happen, but with the commit, it will not happen.
Reviewers: igor, anthony, rven, yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52131
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
Summary:
List of changes:
1) Fix the snprintf() usage in cases where wrong variable was used to determine the output buffer size.
2) Remove unnecessary checks before calling delete operator.
3) Increase code correctness by using size_t type when getting vector's size.
4) Unify the coding style by removing namespace::std usage at the top of the file to confirm to the majority usage.
5) Fix various lint errors pointed out by 'arc lint'.
Test Plan:
Code review and build:
git diff
make clean
make -j 32 commit-prereq
arc lint
Reviewers: kradhakrishnan, sdong, rven, anthony, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51849
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
Summary: Deprecate options.soft_rate_limit, which is hard to tune, with options.soft_pending_compaction_bytes_limit, which would trigger the slowdown if estimated pending compaction bytes exceeds the threshold. The hope is to make it more striaght-forward to tune.
Test Plan: Modify DBTest.SoftLimit to cover options.soft_pending_compaction_bytes_limit instead; run all unit tests.
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, igor, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51117
Summary: Introduce a compaction picking priority that picks files who contains the oldest rows to compact. This is a mode that slightly improves write amplification for random update cases.
Test Plan: Add a unit test and run it in valgrind too.
Reviewers: yhchiang, anthony, IslamAbdelRahman, rven, kradhakrishnan, MarkCallaghan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51459
Summary: crash_test sometimes fails, hitting the add file overlapping assert. Add information in info logs help us to find the bug.
Test Plan: Run all test suites. Do some manual tests to make sure printing is correct.
Reviewers: kradhakrishnan, yhchiang, anthony, IslamAbdelRahman, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D49017
Summary: We don't yet have a CI build for iOS, so our iOS compile gets broken sometimes. Most of the errors are from assumption that size_t is 64-bit, while it's actually 32-bit on some (all?) iOS platforms. This diff fixes the compile.
Test Plan:
TARGET_OS=IOS make static_lib
Observe there are no warnings
Reviewers: sdong, anthony, IslamAbdelRahman, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49029
Summary: As above.
Test Plan: USE_CLANG=1 make check -j
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48981
We will need the log number to validate the recycle-style CRCs. The log
is helpful for debugging, but optional, as not all callers have it.
Signed-off-by: Sage Weil <sage@redhat.com>
When we recycle log files, we need to mix the log number into the CRC
for each record. Note that for logs that don't get recycled (like the
manifest), we always pass a log_number of 0 and false.
Signed-off-by: Sage Weil <sage@redhat.com>
Summary: In MyRocks, it is sometimes important to get propeties only for the subset of the database. This diff implements the API in RocksDB.
Test Plan: ran the GetPropertiesOfTablesInRange
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48651
Summary:
Add kill points in:
1. after creating a file
2. before writing a manifest record
3. before syncing manifest
4. before creating a new current file
5. after creating a new current file
Test Plan: Run all current tests.
Reviewers: yhchiang, igor, anthony, IslamAbdelRahman, rven, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48855
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.
This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48549
Summary:
Add options.compaction_pri, which specifies the policy about which file to compact first.
kCompactionPriByLargestSeq will compact oldest files first.
Verified the behavior in db_bench but did not write unit tests yet. Also need to make it settable through option string and dynamically changeable.
Test Plan: Will write unit tests
Reviewers: igor, rven, anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, MarkCallaghan
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45951
Summary:
This patch finally fixes the ColumnFamilyTest.ReadDroppedColumnFamily test. The test has been failing very sporadically and it was hard to repro. However, I managed to write a new tests that reproes the failure deterministically.
Here's what happens:
1. We start the flush for the column family
2. We check if the column family was dropped here: a3fc49bfdd/db/flush_job.cc (L149)
3. This check goes through, ends up in InstallMemtableFlushResults() and it goes into LogAndApply()
4. At about this time, we start dropping the column family. Dropping the column family process gets to LogAndApply() at about the same time as LogAndApply() from flush process
5. Drop column family goes through LogAndApply() first, marking the column family as dropped.
6. Flush process gets woken up and gets a chance to write to the MANIFEST. However, this is where it gets stuck: a3fc49bfdd/db/version_set.cc (L1975)
7. We see that the column family was dropped, so there is no need to write to the MANIFEST. We return OK.
8. Flush gets OK back from LogAndApply() and it deletes the memtable, thinking that the data is now safely persisted to sst file.
The fix is pretty simple. Instead of OK, we return ShutdownInProgress. This is not really true, but we have been using this status code to also mean "this operation was canceled because the column family has been dropped".
The fix is only one LOC. All other code is related to tests. I added a new test that reproes the failure. I also moved SleepingBackgroundTask to util/testutil.h (because I needed it in column_family_test for my new test). There's plenty of other places where we reimplement SleepingBackgroundTask, but I'll address that in a separate commit.
Test Plan:
1. new test
2. make check
3. Make sure the ColumnFamilyTest.ReadDroppedColumnFamily doesn't fail on Travis: https://travis-ci.org/facebook/rocksdb/jobs/79952386
Reviewers: yhchiang, anthony, IslamAbdelRahman, kradhakrishnan, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46773
Summary:
Up to this point, the subcompactions that make up a compaction
job have been divided based on the key range of the L1 files, and each
subcompaction has handled the key range of only one file. However
DBOption.max_subcompactions allows the user to designate how many
subcompactions at most to perform. This patch updates the
CompactionJob::GetSubcompactionBoundaries() to determine these
divisions accordingly based on that option and other input/system factors.
The current approach orders the starting and/or ending keys of certain
compaction input files and then generates a histogram to approximate the
size covered by the key range between each consecutive pair of keys. Then
it groups these ranges into groups so that the sizes are approximately equal
to one another. The approach has also been adapted to work for universal
compaction as well instead of just for level-based compaction as it was before.
These subcompactions are then executed in parallel by locally spawning
threads, one for each. The results are then aggregated and the compaction
completed.
Test Plan: make all && make check
Reviewers: yhchiang, anthony, igor, noetzli, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43269
Summary:
In some cases, equality comparisons can be done more efficiently than three-way
comparisons. There are quite a few places in the code where we only care about
equality. This patch adds an Equal() method that defaults to using the
Compare() method.
Test Plan: make clean all check
Reviewers: rven, anthony, yhchiang, igor, sdong
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46233
Summary: TableCache::Get() puts parameters in the wrong places so that table readers created by Get() will not have the histogram updated.
Test Plan: Will write a unit test for that.
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D46035
Summary:
This patch adds "rocksdb.aggregated-table-properties"
and "rocksdb.aggregated-table-properties-at-levelN", the former
returns the aggreated table properties of a column family,
while the later returns the aggregated table properties
of the specified level N.
Test Plan: Added tests in db_test
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45087
Summary:
Add a counter of estimated bytes the DB needs to compact for all the compactions to finish. Expose it as a DB Property.
In the future, we can use threshold of this counter to replace soft rate limit and hard rate limit. A single threshold of estimated compaction debt in bytes will be easier for users to reason about when should slow down and stopping than more abstract soft and hard rate limits.
Test Plan: Add unit tests
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44205
Summary: Add a new DB property that calculate the total size of files used by all RocksDB Versions
Test Plan: Unittests for the new property
Reviewers: igor, yhchiang, anthony, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44799
Summary: In internal stats, remember read latency histogram, if statistics is enabled. It can be retrieved from DB::GetProperty() with "rocksdb.dbstats" property, if it is enabled.
Test Plan: Manually run db_bench and prints out "rocksdb.dbstats" by hand and make sure it prints out as expected
Reviewers: igor, IslamAbdelRahman, rven, kradhakrishnan, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44193
Summary: Add a new option that all LoadTableHandlers to use multiple threads to load files on DB Open and Recover
Test Plan:
make check -j64
COMPILE_WITH_TSAN=1 make check -j64
DISABLE_JEMALLOC=1 make all valgrind_check -j64 (still running)
Reviewers: yhchiang, anthony, rven, kradhakrishnan, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43755
Summary:
Changed compaction_job_test to support better/more thorough
tests and added two tests. Also changed MockFileContents
to order using InternalKeyComparator.
Test Plan: make compaction_job_test && ./compaction_job_test; make all && make check
Reviewers: sdong, rven, igor, yhchiang, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42837
Summary:
UpdateAccumulatedStats() is used to optimize compaction decision
esp. when the number of deletion entries are high, but this function
can slowdown DBOpen esp. in disk environment.
This patch adds DBOptions::skip_sats_update_on_db_open, which skips
UpdateAccumulatedStats() in DB::Open() time when it's set to true.
Test Plan: Add DBCompactionTest.SkipStatsUpdateTest
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: tnovak, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42843
Summary:
As of now compactions involving files from Level 0 and Level 1 are single
threaded because the files in L0, although sorted, are not range partitioned like
the other levels. This means that during L0-L1 compaction each file from L1
needs to be merged with potentially all the files from L0.
This attempt to parallelize the L0-L1 compaction assigns a thread and a
corresponding iterator to each L1 file that then considers only the key range
found in that L1 file and only the L0 files that have those keys (and only the
specific portion of those L0 files in which those keys are found). In this way
the overlap is minimized and potentially eliminated between different iterators
focusing on the same files.
The first step is to restructure the compaction logic to break L0-L1 compactions
into multiple, smaller, sequential compactions. Eventually each of these smaller
jobs will be run simultaneously. Areas to pay extra attention to are
# Correct aggregation of compaction job statistics across multiple threads
# Proper opening/closing of output files (make sure each thread's is unique)
# Keys that span multiple L1 files
# Skewed distributions of keys within L0 files
Test Plan: Make and run db_test (newer version has separate compaction tests) and compaction_job_stats_test
Reviewers: igor, noetzli, anthony, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42699
Summary:
Fixes T6548822. Added a new function for estimating the size of the live data
as proposed in the task. The value can be accessed through the property
rocksdb.estimate-live-data-size.
Test Plan:
There are two unit tests in version_set_test and a simple test in db_test.
make version_set_test && ./version_set_test;
make db_test && ./db_test gtest_filter=GetProperty
Reviewers: rven, igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41493
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.
We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.
Test Plan: make check (there might be some unit tests that depend on this behavior)
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41931
Summary: Try to allocate LevelFileIteratorState and LevelFileNumIterator from DB iterator's arena, instead of calling malloc and free.
Test Plan: valgrind check
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40929
