Summary:
This is a feature to sample data-block compressibility and and report them as stats. 1 in N (tunable) blocks is sampled for compressibility using two algorithms:
1. lz4 or snappy for fast compression
2. zstd or zlib for slow but higher compression.
The stats are reported to the caller as raw-bytes and compressed-bytes. The block continues to be compressed for storage using the specified CompressionType.
The db_bench_tool how has a command line option for specifying the sampling rate. It's default value is 0 (no sampling). To test the overhead for a certain value, users can compare the performance of db_bench_tool, varying the sampling rate. It is unlikely to have a noticeable impact for high values like 20.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4842
Differential Revision: D13629011
Pulled By: shobhitdayal
fbshipit-source-id: 14ca668bcab6499b2a1734edf848eb62a4f4fafa
Summary:
There is a potential failure case in DBImpl::SwitchMemtable() that is not handled properly. The call to cur_log_writer->WriteBuffer() can fail due to an IO error. In that case, we need to call SetBGError() in order set the background error since the WriteBuffer() failure may result in data loss.
Also, the asserts for !new_mem and !new_log are incorrect, as those would have been allocated by the time this failure is detected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5072
Differential Revision: D14461384
Pulled By: anand1976
fbshipit-source-id: fb59bce9d61378f37d2dfcd28c0b704b0f43c3cf
Summary:
This reverts commit ee1818081f.
We are not ready to deprecate this feature. revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5034
Differential Revision: D14287246
Pulled By: siying
fbshipit-source-id: e4beafdeaee1c94364fdaa6ba198218d158339f7
Summary:
Right now, users can change statistics.stats_level while DB is running, but TSAN may report
data race. We make stats_level_ to be atomic, and access them using accessors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5030
Differential Revision: D14267519
Pulled By: siying
fbshipit-source-id: 37d7ebeff7a43a406230143422a16af899163f73
Summary:
PreReleaseCallback meant to be called before the writes are visible to the readers. Since the sequence number is known after the WAL write, there is no reason to delay calling PreReleaseCallback to after the memtable write, which would complicates the reader's logic in presence of our memtable writes that are made visible by the other write thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5015
Differential Revision: D14221670
Pulled By: maysamyabandeh
fbshipit-source-id: a504dd665cf923226d7af09cc8e9c7739a25edc6
Summary:
Statistics cost too much CPU for some use cases. Add two stats levels
so that people can choose to skip two types of expensive stats, timers and
histograms.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5027
Differential Revision: D14252765
Pulled By: siying
fbshipit-source-id: 75ecec9eaa44c06118229df4f80c366115346592
Summary:
The read path includes a callback function, ReadCallback, which would eventually calls IsInSnapshot to figure if a particular seq is in the reading snapshot or not. This callback is virtual, which adds the cost of multiple virtual function call to each read. The first few checks in IsInSnapshot, however, are quite trivial and take care of majority of the cases. The patch moves those to a non-virtual function in the the parent class, ReadCallback, to lower the virtual callback cost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5018
Differential Revision: D14226562
Pulled By: maysamyabandeh
fbshipit-source-id: 6feed5b34f3b082e52092c5ef143e29b49c46b44
Summary:
This PR adds public `GetStatsHistory` API to retrieve stats history in the form of an std map. The key of the map is the timestamp in microseconds when the stats snapshot is taken, the value is another std map from stats name to stats value (stored in std string). Two DBOptions are introduced: `stats_persist_period_sec` (default 10 minutes) controls the intervals between two snapshots are taken; `max_stats_history_count` (default 10) controls the max number of history snapshots to keep in memory. RocksDB will stop collecting stats snapshots if `stats_persist_period_sec` is set to 0.
(This PR is the in-memory part of https://github.com/facebook/rocksdb/pull/4535)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4748
Differential Revision: D13961471
Pulled By: miasantreble
fbshipit-source-id: ac836d401ecb84ea92216bf9966f969dedf4ad04
Summary:
MyRocks calls `GetForUpdate` on `INSERT`, for unique key check, and in almost all cases GetForUpdate returns empty result. For such cases, whole key bloom filter is helpful.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4985
Differential Revision: D14118257
Pulled By: miasantreble
fbshipit-source-id: d35cb7109c62fd5ad541a26968e3a3e16d3e85ea
Summary:
The info log header feature never worked well, because log level Header was not
translated to Logger::LogHeader() call. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4980
Differential Revision: D14087283
Pulled By: siying
fbshipit-source-id: 7e7d03ce35fa8d13d4ee549f46f7326f7bc0006d
Summary:
Right now when a flush is triggered, the memory consumption is logged but data size is not.
It's useful to log both when we debug unexpected small flushed file size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4979
Differential Revision: D14071979
Pulled By: siying
fbshipit-source-id: 0cd60449c5205eb00e0fbc299084418f609904ed
Summary:
We introduced ttl option in CompactionOptionsFIFO when ttl-based file
deletion (compaction) was supported only as part of FIFO Compaction. But
with the extension of ttl semantics even to Level compaction,
CompactionOptionsFIFO.ttl can now be deprecated. Instead we will start
using ColumnFamilyOptions.ttl for FIFO compaction as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4965
Differential Revision: D14072960
Pulled By: sagar0
fbshipit-source-id: c98cc2ae695a28136295787cd88d36a220fc219e
Summary:
If `CompressionOptions::max_dict_bytes` and/or `CompressionOptions::zstd_max_train_bytes` are set, `SstFileWriter` will now generate files respecting those options.
I refactored the logic a bit for deciding when to use dictionary compression. Previously we plumbed `is_bottommost_level` down to the table builder and used that. However it was kind of confusing in `SstFileWriter`'s context since we don't know what level the file will be ingested to. Instead, now the higher-level callers (e.g., flush, compaction, file writer) are responsible for building the right `CompressionOptions` to give the table builder.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4978
Differential Revision: D14060763
Pulled By: ajkr
fbshipit-source-id: dc802c327896df2b319dc162d6acc82b9cdb452a
Summary:
if an operation just involves a single column family, then we do
not have to set the kInAtomicGroup tag when writing to MANIFEST. This change
can fix a compatibility test failure, i.e. 5.15 and earlier cannot recognize
kInAtomicGroup tag.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4981
Differential Revision: D14072687
Pulled By: riversand963
fbshipit-source-id: 46b0c61e399f16c6b7169de0b33430d0ed90d6d4
Summary:
Make file ingestion atomic.
as title.
Ingesting external SST files into multiple column families should be atomic. If
a crash occurs and db reopens, either all column families have successfully
ingested the files before the crash, or non of the ingestions have any effect
on the state of the db.
Also add unit tests for atomic ingestion.
Note that the unit test here does not cover the case of incomplete atomic group
in the MANIFEST, which is covered in VersionSetTest already.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4895
Differential Revision: D13718245
Pulled By: riversand963
fbshipit-source-id: 7df97cc483af73ad44dd6993008f99b083852198
Summary:
Previously, stats were logged in warning level. This was done in that way because
people reported that it wasn't logged in MyRocks. However, later we learned that it turns
out to be due to a bug in MyRocks, which is fixed in
79bb705e74
Now we revert the stats logging to INFO level, so that it doesn't pollute the warning
level logging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4977
Differential Revision: D14058485
Pulled By: siying
fbshipit-source-id: 19fab323c19d9bc88184287f209551f9a77ca0e6
Summary:
In `DBImpl::AtomicFlushMemTablesToOutputFiles`, we need to call fsync only once
on the same data directory. If two column families share a common directory for
their data, we call fsync only once.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4817
Differential Revision: D13543689
Pulled By: riversand963
fbshipit-source-id: 4701d77c96a47802fbf6cb9f3337ee65d46b95f5
Summary:
Our previous approach was to train one compression dictionary per compaction, using the first output SST to train a dictionary, and then applying it on subsequent SSTs in the same compaction. While this was great for minimizing CPU/memory/I/O overhead, it did not achieve good compression ratios in practice. In our most promising potential use case, moderate reductions in a dictionary's scope make a major difference on compression ratio.
So, this PR changes compression dictionary to be scoped per-SST. It accepts the tradeoff during table building to use more memory and CPU. Important changes include:
- The `BlockBasedTableBuilder` has a new state when dictionary compression is in-use: `kBuffered`. In that state it accumulates uncompressed data in-memory whenever `Add` is called.
- After accumulating target file size bytes or calling `BlockBasedTableBuilder::Finish`, a `BlockBasedTableBuilder` moves to the `kUnbuffered` state. The transition (`EnterUnbuffered()`) involves sampling the buffered data, training a dictionary, and compressing/writing out all buffered data. In the `kUnbuffered` state, a `BlockBasedTableBuilder` behaves the same as before -- blocks are compressed/written out as soon as they fill up.
- Samples are now whole uncompressed data blocks, except the final sample may be a partial data block so we don't breach the user's configured `max_dict_bytes` or `zstd_max_train_bytes`. The dictionary trainer is supposed to work better when we pass it real units of compression. Previously we were passing 64-byte KV samples which was not realistic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4952
Differential Revision: D13967980
Pulled By: ajkr
fbshipit-source-id: 82bea6f7537e1529c7a1a4cdee84585f5949300f
Summary:
If IsInSnapshot(seq2, snapshot) determines that the snapshot is released, the future queries IsInSnapshot(seq1, snapshot) could still return a definitive answer of true if for example seq1 is too old that is determined visible in all snapshots. This violates a recently added assert statement to compaction iterator. The patch relaxes the assert.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4969
Differential Revision: D14030998
Pulled By: maysamyabandeh
fbshipit-source-id: 6db53db0e37d0a20e8997ef2c1004b8627614ab9
Summary:
Always enable properties block checksum verification for block-based table. For external SST file ingested with 'write_global_seqno==true', we use 'DecodeEntrySlow' to parse its blocks' contents so that the process will not die upon failing the assertion possibly caused by corruption.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4956
Differential Revision: D14012741
Pulled By: riversand963
fbshipit-source-id: 8b766e6f54b36f8f9e074c0e19e0926ec3cce186
Summary:
Implement trace sampling to allow user to specify the sampling frequency, i.e. save one per how many requests, so that a user does not need to log all if he/she is interested in only a sampled set.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4963
Differential Revision: D14011190
Pulled By: tang-jianfeng
fbshipit-source-id: 078b631d9319b67cb089dd2c30e21d0df8dc406a
Summary:
We want to reserve some right that some extra information added manifest
in the future can be forward compatible by previous versions. Now we create a
place holder for that. A bit in tag is added to indicate that a field can be
safely ignored.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4960
Differential Revision: D14000484
Pulled By: siying
fbshipit-source-id: cbf5bad3f9d5ec798f789806f244d1c20d3b66d6
Summary:
We found that the behavior of CompactionFilter::IgnoreSnapshots() = false isn't
what we have expected. We thought that snapshot will always be preserved.
However, we just realized that, if no snapshot is created while compaction
starts, and a snapshot is created after that, the data seen from the snapshot
can successfully be dropped by the compaction. This creates a strange behavior
to the feature, which is hard to explain. Like what is documented in code
comment, this feature is not very useful with snapshot anyway. The decision
is to deprecate the feature.
We keep the function to avoid to break users code. However, we will fail
compactions if false is returned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4954
Differential Revision: D13981900
Pulled By: siying
fbshipit-source-id: 2db8c2c3865acd86a28dca625945d1481b1d1e36
Summary:
Cuckoo Hash is less useful than we initially expected. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4953
Differential Revision: D13979264
Pulled By: siying
fbshipit-source-id: 2a60afdaa989f045357398b43a1cc5d46f4492ed
Summary:
This will fix the following build error:
> db/db_test.cc: In member function ‘virtual void rocksdb::DBTest_CompactFilesShouldTriggerAutoCompaction_Test::TestBody()’:
> db/db_test.cc:5462:8: error: ‘class rocksdb::DB’ has no member named ‘GetColumnFamilyMetaData’
> db_->GetColumnFamilyMetaData(db_->DefaultColumnFamily(), &cf_meta_data);
> db/db_test.cc:5490:8: error: ‘class rocksdb::DB’ has no member named ‘GetColumnFamilyMetaData’
> db_->GetColumnFamilyMetaData(db_->DefaultColumnFamily(), &cf_meta_data);
> db/db_test.cc:5499:8: error: ‘class rocksdb::DB’ has no member named ‘GetColumnFamilyMetaData’
> db_->GetColumnFamilyMetaData(db_->DefaultColumnFamily(), &cf_meta_data);
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4950
Differential Revision: D13965378
Pulled By: miasantreble
fbshipit-source-id: a975435476fe555b1cd9d5da263ee3da3acdea56
Summary:
Existing implementation of PerfContext does not define copy constructor or assignment operator, which could potentially cause problems when user create copies and resets the builtin one. This PR address the issue by providing these two constructors with deep copy semantics.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4919
Differential Revision: D13960406
Pulled By: miasantreble
fbshipit-source-id: 36aab5aaee65d4480f537e4e22148faa45e8e334
Summary:
CompactFiles() may block auto compaction which could cuase DB hang when it
reachs level0_stop_writes_trigger.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4940
Differential Revision: D13929648
Pulled By: cooldoger
fbshipit-source-id: 10842df38df3bebf862cd1a120a88ce961fdd381
Summary:
In NotFound cases, stats BYTES_READ and perf_context.get_read_bytes is still be increased. The amount increased will be
whatever size of the string or PinnableSlice that users passed in as the output data structure. This is wrong. Fix this by not
increasing these two counters.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4938
Differential Revision: D13908963
Pulled By: siying
fbshipit-source-id: 60bce42e4fbb9862bba3da36dbc27b2963ea6162
Summary:
Fix the ouput overlap bug when using subcompactions, the upper bound of output
file was extended incorrectly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4898
Differential Revision: D13736107
Pulled By: ajkr
fbshipit-source-id: 21dca09f81d5f07bf2766bf566f9b50dcab7d8e3
Summary:
The patch fixes the following analyze error by checking the return status of ParseInternalKey.
```
db/merge_helper.cc:306:23: warning: The right operand of '==' is a garbage value
assert(kTypeMerge == orig_ikey.type);
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4937
Differential Revision: D13908506
Pulled By: maysamyabandeh
fbshipit-source-id: 68d7771e75519da3d4bd807fd231675ec12093f6
Summary:
1. this commit fixes our handling of a combination of two separate edge
cases. If a flush job does not pick any memtable to flush (because another
flush job has already picked the same memtables), and the column family
assigned to the flush job is dropped right before RocksDB calls
rocksdb::InstallMemtableAtomicFlushResults, our original code passes
a FileMetaData object whose file number is 0, failing the assertion in
rocksdb::InstallMemtableAtomicFlushResults (assert(m->GetFileNumber() > 0)).
2. Also piggyback a small change: since we already create a local copy of column family's mutable CF options to eliminate potential race condition with `SetOptions` call, we might as well use the local copy in other function calls in the same scope.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4932
Differential Revision: D13901322
Pulled By: riversand963
fbshipit-source-id: b936580af7c127ea0c6c19ea10cd5fcede9fb0f9
Summary:
FlushMemTablesToOutputFiles calls FlushMemTableToOutputFile for each column family. The patch moves the take-snapshot logic to outside FlushMemTableToOutputFile so that it does it once for all the flushes. This also addresses a deadlock issue for resetting the managed snapshot of job_snapshot in the 2nd call to FlushMemTableToOutputFile.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4934
Differential Revision: D13900747
Pulled By: maysamyabandeh
fbshipit-source-id: f3cd650c5fff24cf95c1aaf8a10c149d42bf042c
Summary:
Measure CPU time consumed for a compaction and report it in the stats report
Enable NowCPUNanos() to work for MacOS
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4889
Differential Revision: D13701276
Pulled By: zinoale
fbshipit-source-id: 5024e5bbccd4dd10fd90d947870237f436445055
Summary:
before file ingestion (in preparation phase), verify the checksums of
the blocks of the external SST file, including properties block with global
seqno.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4916
Differential Revision: D13863501
Pulled By: riversand963
fbshipit-source-id: dc54697f970e3807832e2460f7228fcc7efe81ee
Summary:
While stepping through the code I noticed that there is a redundant call to TableFileName.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4925
Differential Revision: D13845749
Pulled By: sagar0
fbshipit-source-id: 31db45716b4d720e0e0350dd457b49d6f1848e7d
Summary:
Store_index_in_file is a less useful feature. To simplify the code to maintain, we are dropping the feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4914
Differential Revision: D13791883
Pulled By: siying
fbshipit-source-id: d187c5d662584866103e4b77d09dfb925509ae2e
Summary:
https://github.com/facebook/rocksdb/pull/4053 avoids memcopy for Get() results if files are immortable
(read-only DB, max_open_files=-1) and the file is ammaped. The same optimization is being applied to PlainTable
here.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4924
Differential Revision: D13827749
Pulled By: siying
fbshipit-source-id: 1f2cbfc530b40ce08ccd53f95f6e78de4d1c2f96
Summary:
I didn't find where customized hash function is used in DynamicBloom. This can only reduce performance. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4915
Differential Revision: D13794452
Pulled By: siying
fbshipit-source-id: e38669b11e01444d2d782da11c7decabbd851819
Summary:
Previously compaction was not collapsing operands for a first
key on a layer, even in cases when it was its root of history. Some
tests (CompactionJobTest.NonAssocMerge) was actually accounting
for that bug,
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4909
Differential Revision: D13781169
Pulled By: finik
fbshipit-source-id: d2de353ecf05bec39b942cd8d5b97a8dc445f336
Summary:
- If block cache disabled or not used for meta-blocks, `BlockBasedTableReader::Rep::uncompression_dict` owns the `UncompressionDict`. It is preloaded during `PrefetchIndexAndFilterBlocks`.
- If block cache is enabled and used for meta-blocks, block cache owns the `UncompressionDict`, which holds dictionary and digested dictionary when needed. It is never prefetched though there is a TODO for this in the code. The cache key is simply the compression dictionary block handle.
- New stats for compression dictionary accesses in block cache: "BLOCK_CACHE_COMPRESSION_DICT_*" and "compression_dict_block_read_count"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4881
Differential Revision: D13663801
Pulled By: ajkr
fbshipit-source-id: bdcc54044e180855cdcc57639b493b0e016c9a3f
Summary:
Even one key falls in a file's range, we can not infer it definitely exists in this file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4902
Differential Revision: D13795018
Pulled By: siying
fbshipit-source-id: 590956f727e9440fcdee55ad9541ace934c64914
Summary:
compaction_pri = kMinOverlappingRatio usually provides much better write amplification than the default.
https://github.com/facebook/rocksdb/pull/4907 fixes one shortcome of this option. Make it default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4911
Differential Revision: D13789262
Pulled By: siying
fbshipit-source-id: d90acf8c4dede44f00d183ca4c7a210259378269
Summary:
Right now, CompactionPri = kMinOverlappingRatio provides best write amplification, but it doesn't
prioritize files with more tombstones. We combine the two good features: make kMinOverlappingRatio
to boost files with lots of tombstones too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4907
Differential Revision: D13788774
Pulled By: siying
fbshipit-source-id: 1991cbb495fb76c8b529de69896e38d81ed9d9b3
Summary:
This is essentially a re-submission of #4251 with a few improvements:
- Split `CompressionDict` into two separate classes: `CompressionDict` and `UncompressionDict`
- Eliminated `Init` functions. Instead do all initialization work in constructors.
- Added test case for parallel DB open, which is the scenario where #4251 failed under TSAN.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4849
Differential Revision: D13606039
Pulled By: ajkr
fbshipit-source-id: 08c236059798c710db9cbf545fce0f371232d447
Summary:
Fix how CompactionIterator::findEarliestVisibleSnapshots handles released snapshot. It fixing the two scenarios:
Scenario 1:
key1 has two values v1 and v2. There're two snapshots s1 and s2 taken after v1 and v2 are committed. Right after compaction output v2, s1 is released. Now findEarliestVisibleSnapshot may see s1 being released, and return the next snapshot, which is s2. That's larger than v2's earliest visible snapshot, which was s1.
The fix: the only place we check against last snapshot and current key snapshot is when we decide whether to compact out a value if it is hidden by a later value. In the check if we see current snapshot is even larger than last snapshot, we know last snapshot is released, and we are safe to compact out current key.
Scenario 2:
key1 has two values v1 and v2. there are two snapshots s1 and s2 taken after v1 and v2 are committed. During compaction before we process the key, s1 is released. When compaction process v2, snapshot checker may return kSnapshotReleased, and the earliest visible snapshot for v2 become s2. When compaction process v1, snapshot checker may return kIsInSnapshot (for WritePrepared transaction, it could be because v1 is still in commit cache). The result will become inconsistent here.
The fix: remember the set of released snapshots ever reported by snapshot checker, and ignore them when finding result for findEarliestVisibleSnapshot.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4890
Differential Revision: D13705538
Pulled By: maysamyabandeh
fbshipit-source-id: e577f0d9ee1ff5a6035f26859e56902ecc85a5a4
Summary:
Compaction iterator keep a copy of list of live snapshots at the beginning of compaction, and then query snapshot checker to verify if values of a sequence number is visible to these snapshots. However when the snapshot is released in the middle of compaction, the snapshot checker implementation (i.e. WritePreparedSnapshotChecker) may remove info with the snapshot and may report incorrect result, which lead to values being compacted out when it shouldn't. This patch conservatively keep the values if snapshot checker determines that the snapshots is released.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4858
Differential Revision: D13617146
Pulled By: maysamyabandeh
fbshipit-source-id: cf18a94f6f61a94bcff73c280f117b224af5fbc3
Summary:
By convention, time_t almost always stores the integral number of seconds since
00:00 hours, Jan 1, 1970 UTC, according to http://www.cplusplus.com/reference/ctime/time_t/.
We surely want more precision than seconds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4868
Differential Revision: D13633046
Pulled By: riversand963
fbshipit-source-id: 4e01e23a22e8838023c51a91247a286dbf3a5396
Summary:
With WritePrepared transaction, flush/compaction can contain uncommitted keys, and those keys can get committed during compaction. If a snapshot is taken before the key is committed, it should not see the key. On the other hand, compaction grab the list of snapshots at its beginning, and only consider those snapshots to dedup keys. Consider the case:
```
seq = 1: put "foo" = "bar"
seq = 2: transaction T: delete "foo", prepare
seq = 3: compaction start
seq = 4: take snapshot S
seq = 5: transaction T: commit.
...
seq = N: compaction iterator reached key "foo".
```
When compaction start, the list of snapshot is empty. Compaction doesn't take snapshot S into account. When it reached "foo", transaction T is committed. Compaction may think the value "foo=bar" is not visible by any snapshot (which is wrong), and compact the value out.
The fix is to explicitly take a snapshot before compaction grabbing the list of snapshots. Compaction will then has to keep keys visible to this snapshot.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4883
Differential Revision: D13668775
Pulled By: maysamyabandeh
fbshipit-source-id: 1cab9615f94b7d3e8522cc3d44c3a14c7d4720e4
Summary:
The AdvanceMaxEvictedSeq algorithm assumes that new snapshots always have sequence number larger than the last max_evicted_seq_. To enforce this assumption we make two changes:
i) max is not advanced beyond the last published seq, with the exception that the evicted commit entry itself is not published yet, which is quite rare.
ii) When obtaining the snapshot if the max_evicted_seq_ is not published yet, commit a dummy entry so that it waits for it to be published and also increased the latest published seq by one above the max.
To test these non-realistic corner cases we create a commit cache with size 1 so that every single commit results into eviction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4886
Differential Revision: D13685270
Pulled By: maysamyabandeh
fbshipit-source-id: 5461bc09c2a9b75798bfcb9853a256c81cdac0b0
Summary:
Right now the error mesage when options.wal_dir doesn't exist is not helpful to users. Be more specific
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4874
Differential Revision: D13642425
Pulled By: siying
fbshipit-source-id: 9a3172ed0f799af233b0f3b2e5e35bc7ce04c7b5
Summary:
If we do not do this, then reading MutableCFOptions may have a race condition
with SetOptions which modifies MutableCFOptions.
Also reserve space in advance for vectors to avoid reallocation changing the
address of its elements.
Test plan
```
$make clean && make -j32 all check
$make clean && COMPILE_WITH_TSAN=1 make -j32 all check
$make clean && COMPILE_WITH_ASAN=1 make -j32 all check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4876
Differential Revision: D13644500
Pulled By: riversand963
fbshipit-source-id: 4b8112c5c819d5a2922bb61ad1521b3d2fb2fd47
Summary:
The vector returned by SnapshotList::GetAll could have duplicate entries if two separate snapshots have the same sequence number. However, when this vector is used in compaction the duplicate entires are of no use and could be safely ignored. Moreover not having duplicate entires simplifies reasoning in the compaction_iterator.cc code. For example when searching for the previous_snap we currently use the snapshot before the current one but the way the code uses that it expects it to be also less than the current snapshot, which would be simpler to read if there is no duplicate entry in the snapshot list.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4860
Differential Revision: D13615502
Pulled By: maysamyabandeh
fbshipit-source-id: d45bf01213ead5f39db811f951802da6fcc3332b
Summary:
https://github.com/facebook/rocksdb/pull/3340 introduces preloading when max_open_files != -1.
It doesn't preload index and filter in non-initial file loading case. This is a little bit too
complicated to understand. We observed in one MyRocks use case where the filter is expected to be
preloaded but is not. To simplify the use case, we simply always prefetch the index and filter.
They anyway is expected to be loaded in the file verification phase anyway.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4852
Differential Revision: D13595402
Pulled By: siying
fbshipit-source-id: d4d8624eb3e849e20aeb990df2100502d85aff31
Summary:
In compaction iterator, if the next value of single delete is a blob value, it should not treated as mismatch. This is only a minor fix and doesn't affect correctness.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4848
Differential Revision: D13585812
Pulled By: yiwu-arbug
fbshipit-source-id: 0ff6223fa03a644ac9fd8a2d77f9d6711d0a62b0
Summary:
Previously for point lookup we decided which file to look into based on user key overlap only. We also did not truncate range tombstones in the point lookup code path. These two ideas did not interact well in cases like this:
- L1 has range tombstone [a, c)#1 and point key b#2. The data is split between file1 with range [a#1,1, b#72057594037927935,15], and file2 with range [b#2, c#1].
- L1's file2 gets compacted to L2.
- User issues `Get()` for b#3.
- L1's file1 is opened and the range tombstone [a, c)#1 is found for b, while no point-key for b is found in L1.
- `Get()` assumes that the range tombstone must cover all data in that range in lower levels, so short circuits and returns `NotFound`.
The solution to this problem is to not look into files that only overlap with the point lookup at a range tombstone sentinel endpoint. In the above example, this would mean not opening L1's file1 or its tombstones during the `Get()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4829
Differential Revision: D13561355
Pulled By: ajkr
fbshipit-source-id: a13c21c816870a2f5d32a48af6dbd719a7d9d19f
Summary:
as titled.
Since different bg flush threads can flush different sets of column families
(due to column family creation and drop), we decide not to let one thread
perform atomic flush result installation for other threads. Bg flush threads
will install their atomic flush results sequentially to MANIFEST, using
a conditional variable, i.e. atomic_flush_install_cv_ to coordinate.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4791
Differential Revision: D13498930
Pulled By: riversand963
fbshipit-source-id: dd7482fc41f4bd22dad1e1ef7d4764ef424688d7
Summary:
Declare Jemalloc non-standard APIs as weak symbols, so that if Jemalloc is linked with the binary, these symbols will be replaced by Jemalloc's, otherwise they will be nullptr. This is similar to how folly detect jemalloc, but we assume the main program use jemalloc as long as jemalloc is linked: https://github.com/facebook/folly/blob/master/folly/memory/Malloc.h#L147
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4844
Differential Revision: D13574934
Pulled By: yiwu-arbug
fbshipit-source-id: 7ea871beb1be7d5a1259cc38f9b78078793db2db
Summary:
The original implementation has two problems:
1. f0dda35d7d/db/db_impl_write.cc (L478)f0dda35d7d/db/write_thread.h (L231)
If the callback status of leader of the write_group fails, then the whole write_group will not write to WAL, this may cause data loss.
2. f0dda35d7d/db/write_thread.h (L130)
The annotation says that Writer.status is the status of memtable inserter, but the original implementation use it for another case which is not consistent with the original design. Looks like we can still reuse Writer.status, but we should modify the annotation, so Writer.status is not only the status of memtable inserter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4838
Differential Revision: D13574070
Pulled By: yiwu-arbug
fbshipit-source-id: a2a2aefcfd329c4c6a91652bf090aaf1ce119c4b
Summary:
DBSSTTest.RateLimitedDelete is flakey. The root cause is not completely identified, but
the compaction waiting in the test doesn't strictly wait for compaction cleaning to finish, which
may cause test flakiness. Fix it first and see whether the failures still happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4840
Differential Revision: D13567273
Pulled By: siying
fbshipit-source-id: 6fce38b912aff92a925231e7aa9bb0fef892761a
Summary:
- To be consistent with the accounting of other optypes in `TableProperties`, we should count range tombstones in `TableProperties::num_entries` and `TableProperties::num_deletions`.
- Updated assertions in stress test's `OnTableFileCreated` handler to accept files with range tombstones only.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4841
Differential Revision: D13568424
Pulled By: ajkr
fbshipit-source-id: 0139d7806494eda20ece67ec460d2458dbbf6026
Summary:
Avoid locking the DB mutex in order to reference SuperVersions. Instead, we get the thread local cached SuperVersion for each column family in the list. It depends on finding a sequence number that overlaps with all the open memtables. We start with the latest published sequence number, and if any of the memtables is sealed before we can get all the SuperVersions, the process is repeated. After a few times, give up and lock the DB mutex.
Tests:
1. Unit tests
2. make check
3. db_bench -
TEST_TMPDIR=/dev/shm ./db_bench -use_existing_db=true -benchmarks=readrandom -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=5000000 -reads=1000000 -threads=32 -compression_type=none -cache_size=1048576000 -batch_size=1 -bloom_bits=1
readrandom : 0.167 micros/op 5983920 ops/sec; 426.2 MB/s (1000000 of 1000000 found)
Multireadrandom with batch size 1:
multireadrandom : 0.176 micros/op 5684033 ops/sec; (1000000 of 1000000 found)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4754
Differential Revision: D13363550
Pulled By: anand1976
fbshipit-source-id: 6243e8de7dbd9c8bb490a8eca385da0c855b1dd4
Summary:
The `flush_reason` parameter in `DBImpl::InstallSuperVersionAndScheduleWork` is
not used. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4816
Differential Revision: D13543218
Pulled By: riversand963
fbshipit-source-id: 8fc75d49462ce092e85aef0fe0c50936140db153
Summary:
Choose to preload some files if options.max_open_files != -1. This can slightly narrow the gap of performance between options.max_open_files is -1 and a large number. To avoid a significant regression to DB reopen speed if options.max_open_files != -1. Limit the files to preload in DB open time to 16.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3340
Differential Revision: D6686945
Pulled By: siying
fbshipit-source-id: 8ec11bbdb46e3d0cdee7b6ad5897a09c5a07869f
Summary:
1. Remove unused API SubtractCompactionTask().
2. Assert outstanding tasks drop to zero in ConcurrentTaskLimiterImpl destructor.
3. Remove GetOutstandingTask() check from manual compaction test, as TEST_WaitForCompact() doesn't synced with 'delete prepicked_compaction' in DBImpl::BGWorkCompaction(), which may make the test flaky.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4795
Differential Revision: D13542183
Pulled By: siying
fbshipit-source-id: 5eb2a47e62efe4126937149aa0df6e243ebefc33
Summary:
Add a new per level counter for block cache hits, increase it by one on every successful attempt to get an entry from cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4796
Differential Revision: D13513688
Pulled By: zinoale
fbshipit-source-id: 104df038f1232e3356e162eb2d8ca138e34a8281
Summary:
Previously we were cleaning up range tombstone meta-block by calling `ReleaseCachedEntry`, which wouldn't work if `value != nullptr && cache_handle == nullptr`. This happened at least in the case with mmap reads and block cache both enabled. I noticed `NewDataBlockIterator` intends to handle all these cases, so migrated to that instead of `NewUnfragmentedRangeTombstoneIterator`.
Also changed the table-opening logic to fail on `ReadRangeDelBlock` failure, since that can cause data corruption. Added a test case to verify this behavior. Note the test case does not fail on `TryReopen` because failure to preload table handlers is not considered critical. However, it does fail on any read involving that file since it cannot return correct data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4810
Differential Revision: D13534296
Pulled By: ajkr
fbshipit-source-id: 55dde1111717cea6ec4bf38418daab81ccef3599
Summary:
Introduce the first CPU timing counter, perf_context.get_cpu_nanos. This opens a door to more CPU counters in the future.
Only Posix Env has it implemented using clock_gettime() with CLOCK_THREAD_CPUTIME_ID. How accurate the counter is depends on the platform.
Make PerfStepTimer to take an Env as an argument, and sometimes pass it in. The direct reason is to make the unit tests to use SpecialEnv where we can ingest logic there. But in long term, this is a good change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4741
Differential Revision: D13287798
Pulled By: siying
fbshipit-source-id: 090361049d9d5095d1d1a369fe1338d2e2e1c73f
Summary:
To avoid a race on the flag, make it an atomic_bool. This
doesn't seem to significantly affect benchmarks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4801
Differential Revision: D13523845
Pulled By: abhimadan
fbshipit-source-id: 3bc29f53c50a4e06cd9f8c6232a4bb221868e055
Summary:
This TODO was already addressed, but I forgot to remove it
before landing the PR it came from.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4800
Differential Revision: D13522284
Pulled By: abhimadan
fbshipit-source-id: 7766bc4f5b54e47d355cf26137ef5e86c604472a
Summary:
This PR contains the following fixes:
1. Fixing Makefile to support non-default locations of developer tools
2. Fixing compile error using a patch from https://github.com/facebook/rocksdb/pull/4007
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4687
Differential Revision: D13287263
Pulled By: riversand963
fbshipit-source-id: 4525eb42ba7b6f82af5f9bfb8e52fa4024e27ccc
Summary:
1) `transaction_base.h` overrides from `transaction.h` with a `const boolean do_validate`.
The non-const base declaration, which I cannot see the need for, causes a compilation error on Microsoft Windows.
2) Implicit cast from `double` to `uint64_t` causes a compilation error on Microsoft Windows.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4798
Differential Revision: D13519734
Pulled By: sagar0
fbshipit-source-id: 6e8cb80e9a589b1122e1500c21b8e3a3a472b459
Summary:
in certain cases, we do not perform memtable switching if the active
memtable of the column family is empty. Two exceptions:
1. In manual flush, if cached_recoverable_state_empty_ is false, then we need
to switch memtable due to requirement of transaction.
2. In switch WAL, we need to switch memtable anyway because we have to seal the
memtable if the WAL on which it depends will be closed.
This change can potentially delay the occurence of write stalls because number
of memtables increase more slowly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4792
Differential Revision: D13499501
Pulled By: riversand963
fbshipit-source-id: 91c9b17ae753578578039f3851667d93610005e1
Summary:
Now that v2 is fully functional, the v1 aggregator is removed.
The v2 aggregator has been renamed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4778
Differential Revision: D13495930
Pulled By: abhimadan
fbshipit-source-id: 9d69500a60a283e79b6c4fa938fc68a8aa4d40d6
Summary:
RangeDelAggregatorV2 now supports ShouldDelete calls on
snapshot stripes and creation of range tombstone compaction iterators.
RangeDelAggregator is no longer used on any non-test code path, and will
be removed in a future commit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4758
Differential Revision: D13439254
Pulled By: abhimadan
fbshipit-source-id: fe105bcf8e3d4a2df37a622d5510843cd71b0401
Summary:
The test fails sporadically expecting the DB to be empty after DeleteFilesInRange(..., nullptr, nullptr) call which is not. Debugging shows cases where the files are skipped since they are being compacted. The patch fixes the test by waiting for the last CompactRange to finish before calling DeleteFilesInRange.
Verified by
```
~/gtest-parallel/gtest-parallel ./db_compaction_test --gtest_filter=DBCompactionTest.DeleteFileRange --repeat=10000
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4784
Differential Revision: D13469402
Pulled By: maysamyabandeh
fbshipit-source-id: 3d8f44abe205b82c69f01e7edf27e1f8098248e1
Summary:
options_file_number_ must be written under db::mutex_ sine its read is protected by mutex_ in ::GetLiveFiles(). However currently it is written in ::RenameTempFileToOptionsFile() which according to its contract must be called without holding db::mutex_. The patch fixes the race condition by also acquitting the mutex_ before writing options_file_number_. Also it does that only if the rename of option file is successful.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4780
Differential Revision: D13461411
Pulled By: maysamyabandeh
fbshipit-source-id: 2d5bae96a1f3e969ef2505b737cf2d7ae749787b
Summary:
If one column family is dropped, we should simply skip it and continue to flush
other active ones.
Currently we use Status::ShutdownInProgress to notify caller of column families
being dropped. In the future, we should consider using a different Status code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4708
Differential Revision: D13378954
Pulled By: riversand963
fbshipit-source-id: 42f248cdf2d32d4c0f677cd39012694b8f1328ca
Summary:
The PR is targeting to resolve the issue of:
https://github.com/facebook/rocksdb/issues/3972#issue-330771918
We have a rocksdb created with leveled-compaction with multiple column families (CFs), some of CFs are using HDD to store big and less frequently accessed data and others are using SSD.
When there are continuously write traffics going on to all CFs, the compaction thread pool is mostly occupied by those slow HDD compactions, which blocks fully utilize SSD bandwidth.
Since atomic write and transaction is needed across CFs, so splitting it to multiple rocksdb instance is not an option for us.
With the compaction thread control, we got 30%+ HDD write throughput gain, and also a lot smooth SSD write since less write stall happening.
ConcurrentTaskLimiter can be shared with multi-CFs across rocksdb instances, so the feature does not only work for multi-CFs scenarios, but also for multi-rocksdbs scenarios, who need disk IO resource control per tenant.
The usage is straight forward:
e.g.:
//
// Enable compaction thread limiter thru ColumnFamilyOptions
//
std::shared_ptr<ConcurrentTaskLimiter> ctl(NewConcurrentTaskLimiter("foo_limiter", 4));
Options options;
ColumnFamilyOptions cf_opt(options);
cf_opt.compaction_thread_limiter = ctl;
...
//
// Compaction thread limiter can be tuned or disabled on-the-fly
//
ctl->SetMaxOutstandingTask(12); // enlarge to 12 tasks
...
ctl->ResetMaxOutstandingTask(); // disable (bypass) thread limiter
ctl->SetMaxOutstandingTask(-1); // Same as above
...
ctl->SetMaxOutstandingTask(0); // full throttle (0 task)
//
// Sharing compaction thread limiter among CFs (to resolve multiple storage perf issue)
//
std::shared_ptr<ConcurrentTaskLimiter> ctl_ssd(NewConcurrentTaskLimiter("ssd_limiter", 8));
std::shared_ptr<ConcurrentTaskLimiter> ctl_hdd(NewConcurrentTaskLimiter("hdd_limiter", 4));
Options options;
ColumnFamilyOptions cf_opt_ssd1(options);
ColumnFamilyOptions cf_opt_ssd2(options);
ColumnFamilyOptions cf_opt_hdd1(options);
ColumnFamilyOptions cf_opt_hdd2(options);
ColumnFamilyOptions cf_opt_hdd3(options);
// SSD CFs
cf_opt_ssd1.compaction_thread_limiter = ctl_ssd;
cf_opt_ssd2.compaction_thread_limiter = ctl_ssd;
// HDD CFs
cf_opt_hdd1.compaction_thread_limiter = ctl_hdd;
cf_opt_hdd2.compaction_thread_limiter = ctl_hdd;
cf_opt_hdd3.compaction_thread_limiter = ctl_hdd;
...
//
// The limiter is disabled by default (or set to nullptr explicitly)
//
Options options;
ColumnFamilyOptions cf_opt(options);
cf_opt.compaction_thread_limiter = nullptr;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4332
Differential Revision: D13226590
Pulled By: siying
fbshipit-source-id: 14307aec55b8bd59c8223d04aa6db3c03d1b0c1d
Summary:
The test has been failing sporadically probably because the configured compaction options were actually unused. Verified that by the following:
```
~/gtest-parallel/gtest-parallel ./db_compaction_test --gtest_filter=DBCompactionTest.DeleteFileRange --repeat=1000
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4776
Differential Revision: D13441052
Pulled By: maysamyabandeh
fbshipit-source-id: d35075b9e6cef9b9c9d0d571f9cd72ade8eda55d
Summary:
To support the flush/compaction use cases of RangeDelAggregator
in v2, FragmentedRangeTombstoneIterator now supports dropping tombstones
that cannot be read in the compaction output file. Furthermore,
FragmentedRangeTombstoneIterator supports the "snapshot striping" use
case by allowing an iterator to be split by a list of snapshots.
RangeDelAggregatorV2 will use these changes in a follow-up change.
In the process of making these changes, other miscellaneous cleanups
were also done in these files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4740
Differential Revision: D13287382
Pulled By: abhimadan
fbshipit-source-id: f5aeb03e1b3058049b80c02a558ee48f723fa48c
Summary:
Change the directory where ExternalSSTFileBasicTest* tests run.
**Problem:**
Without this change, I spent considerable time chasing around a non-existent issue as ExternalSSTFileTest.* and ExternalSSTFileBasicTest.* create similar directories.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4766
Differential Revision: D13409384
Pulled By: sagar0
fbshipit-source-id: c33e1f4d505dfa6efbc788d6c57cdb680053ded3
Summary:
It is possible to see a situation like the following when
subcompactions are enabled:
1. A subcompaction boundary is set to `[b, e)`.
2. The first output file in a subcompaction has `c@20` as its smallest key
3. The range tombstone `[a, d)30` is encountered.
4. The tombstone is written to the range-del meta block and the new
smallest key is set to `b@0` (since no keys in this subcompaction's
output can be smaller than `b`).
5. A key `b@10` in a lower level will now reappear, since it is not
covered by the truncated start key `b@0`.
In general, unless the smallest data key in a file has a seqnum of 0, it
is not safe to truncate a tombstone at the start key to have a seqnum of
0, since it can expose keys with a seqnum greater than 0 but less than
the tombstone's actual seqnum.
To fix this, when the lower bound of a file is from the subcompaction
boundaries, we now set the seqnum of an artificially extended smallest
key to the tombstone's seqnum. This is safe because subcompactions
operate over disjoint sets of keys, and the subcompactions that can
experience this problem are not the first subcompaction (which is
unbounded on the left).
Furthermore, there is now an assertion to detect the described anomalous
case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4723
Differential Revision: D13236188
Pulled By: abhimadan
fbshipit-source-id: a6da6a113f2de1e2ff307ca72e055300c8fe5692
Summary:
1. DBImplReadOnly::GetLiveFiles should not return NotSupported. Instead, it
should call DBImpl::GetLiveFiles(flush_memtable=false).
2. In DBImp::Recover, we should also recover the OPTIONS file name and/or
number so that an immediate subsequent GetLiveFiles will get the correct
OPTIONS name.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4681
Differential Revision: D13069205
Pulled By: riversand963
fbshipit-source-id: 3e6a0174307d06db5a01feb099b306cea1f7f88a
Summary:
When write stall has already been triggered due to number of L0 files reaching
threshold, file ingestion must proceed with its flush without waiting for the
write stall condition to cleared by the compaction because compaction can wait
for ingestion to finish (circular wait).
In order to avoid this wait, we can set `FlushOptions.allow_write_stall` to be
true (default is false). Setting it to false can cause deadlock.
This can happen when the number of compaction threads is low.
Considere the following
```
Time compaction_thread ingestion_thread
| num_running_ingest_file_++
| while(num_running_ingest_file_>0){wait}
| flush
V
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4751
Differential Revision: D13343037
Pulled By: riversand963
fbshipit-source-id: d3b95938814af46ec4c463feff0b50c70bd8b23f
Summary:
Current implementation of `current_over_upper_bound_` fails to take into consideration that keys might be invalid in either base iterator or delta iterator. Calling key() in such scenario will lead to assertion failure and runtime errors.
This PR addresses the bug by adding check for valid keys before calling `IsOverUpperBound()`, also added test coverage for iterate_upper_bound usage in BaseDeltaIterator
Also recommit https://github.com/facebook/rocksdb/pull/4656 (It was reverted earlier due to bugs)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4702
Differential Revision: D13146643
Pulled By: miasantreble
fbshipit-source-id: 6d136929da12d0f2e2a5cea474a8038ec5cdf1d0
Summary:
Full block (use_block_based_builder=false) Bloom filter has clear CPU saving benefits but with limitation of using temp memory when building an SST file proportional to the SST file size. We reduced the chance of having large SST files with multi-level universal compaction. Now we change to a default with better performance.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4735
Differential Revision: D13266674
Pulled By: siying
fbshipit-source-id: 7594a4c3e32568a5a2adce22bb0e46553e55c602
Summary:
**Summary:**
Simplified the code layout by moving FIFOCompactionPicker to a separate file.
**Why?:**
While trying to add ttl functionality to universal compaction, I found that `FIFOCompactionPicker` class and its impl methods to be interspersed between `LevelCompactionPicker` methods which kind-of made the code a little hard to traverse. So I moved `FIFOCompactionPicker` to a separate compaction_picker_fifo.h/cc file, similar to `UniversalCompactionPicker`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4724
Differential Revision: D13227914
Pulled By: sagar0
fbshipit-source-id: 89471766ea67fa4d87664a41c057dd7df4b3d4e3
Summary:
There is a race condition in DBFlushTest.SyncFail, as illustrated below.
```
time thread1 bg_flush_thread
| Flush(wait=false, cfd)
| refs_before=cfd->current()->TEST_refs() PickMemtable calls cfd->current()->Ref()
V
```
The race condition between thread1 getting the ref count of cfd's current
version and bg_flush_thread incrementing the cfd's current version makes it
possible for later assertion on refs_before to fail. Therefore, we add test
sync points to enforce the order and assert on the ref count before and after
PickMemtable is called in bg_flush_thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4633
Differential Revision: D12967131
Pulled By: riversand963
fbshipit-source-id: a99d2bacb7869ec5d8d03b24ef2babc0e6ae1a3b
Summary:
there is chance that
* the caller tries to repair the db when holding the db_lock, in
that case the env implementation might not set the `lock`
parameter of Repairer::Run().
* the caller somehow never calls Repairer::Run().
either way, the desctructor of Repair will compare the uninitialized
db_lock_ with nullptr, and tries to unlock it. there is good chance
that the db_lock_ is not nullptr, then boom.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4683
Differential Revision: D13260287
Pulled By: riversand963
fbshipit-source-id: 878a119d2e9f10a0fa17ee62cf3fb24b33d49fa5
Summary:
Removed `one_time_use` flag, which removed the need for some
tests, and changed all `NewRangeTombstoneIterator` methods to return
`FragmentedRangeTombstoneIterators`.
These changes also led to removing `RangeDelAggregatorV2::AddUnfragmentedTombstones`
and one of the `MemTableListVersion::AddRangeTombstoneIterators` methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4692
Differential Revision: D13106570
Pulled By: abhimadan
fbshipit-source-id: cbab5432d7fc2d9cdfd8d9d40361a1bffaa8f845
Summary:
If user do not end the trace manually, the tracing will continue which can potential use up all the storage space and cause problem. In this PR, the max trace file size is added to the TraceOptions and user can set the value if they need or the default is 64GB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4610
Differential Revision: D12893400
Pulled By: zhichao-cao
fbshipit-source-id: acf4b5a6076bb691778bdfbac4864e1006758953
Summary:
Previously, every range tombstone iterator was seeked on every
ShouldDelete call, which quickly degraded performance for long range
scans. This PR improves performance by tracking iterator positions and
only advancing iterators when necessary.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4677
Differential Revision: D13205373
Pulled By: abhimadan
fbshipit-source-id: 80c199dace1e19362a4c61c686bf01913eae87cb
Summary:
We haven't been populating `NO_FILE_CLOSES` since v1.5.8 even though it was never marked as deprecated. Start populating it again. Conveniently `DeleteTableReader` has an unused `void*` argument that we can use...
Blame: 63f216ee0aCloses#4700.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4703
Differential Revision: D13146769
Pulled By: ajkr
fbshipit-source-id: ad8d6fb0493e701f60a165a3bca1787d255be008
Summary:
…ons (#4676)"
This reverts commit b32d087dbb.
`MemoryAllocator` needs to be with `Cache`, since cache entry can
outlive DB and block based table. The cache needs to hold reference to
memory allocator when deleting cache entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4697
Differential Revision: D13133490
Pulled By: yiwu-arbug
fbshipit-source-id: 8ef7e8a51263bfd929f892fd062665ff4ce9ce5a
Summary:
The old RangeDelAggregator did expensive pre-processing work
to create a collapsed, binary-searchable representation of range
tombstones. With FragmentedRangeTombstoneIterator, much of this work is
now unnecessary. RangeDelAggregatorV2 takes advantage of this by seeking
in each iterator to find a covering tombstone in ShouldDelete, while
doing minimal work in AddTombstones. The old RangeDelAggregator is still
used during flush/compaction for now, though RangeDelAggregatorV2 will
support those uses in a future PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4649
Differential Revision: D13146964
Pulled By: abhimadan
fbshipit-source-id: be29a4c020fc440500c137216fcc1cf529571eb3
Summary:
Since a range tombstone seen at one level will cover all keys
in the range at lower levels, there was a short-circuiting check in Get
that reported a key was not found at most one file after the range
tombstone was discovered. However, this was incorrect for merge
operands, since a deletion might only cover some merge operands,
which implies that the key should be found. This PR fixes this logic in
the Version portion of Get, and removes the logic from the MemTable
portion of Get, since the perforamnce benefit provided there is minimal.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4698
Differential Revision: D13142484
Pulled By: abhimadan
fbshipit-source-id: cbd74537c806032f2bfa564724d01a80df7c8f10
Summary:
WriteBufferManger is not invoked when allocating memory for memtable if the limit is not set even if a cache is passed. It is inconsistent from the comment syas. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4695
Differential Revision: D13112722
Pulled By: siying
fbshipit-source-id: 0b27eef63867f679cd06033ea56907c0569597f4
Summary:
This is a quick fix for the uninitialized bugs in `LiveFileMetaData` and `SstFileMetaData` that were uncovered in #4686.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4693
Differential Revision: D13113189
Pulled By: ajkr
fbshipit-source-id: 18e798d031d2a59d0b55fc010c135e0126f4042d
Summary:
This fixes an assertion.
An atomic flush can have multiple flush jobs. Some of them may fail. If any of
them fails, we need to rollback all of them.
For the flush jobs that do fail, we already call `RollbackMemTableFlush` in
`FlushJob::Run`. The tricky part is for flush jobs that have completed
successfully. We need to call `RollbackMemTableFlush` for them as well.
The newly added DBAtomicFlushTest.AtomicFlushRollbackSomeJobs will SigAbort
without the corresponding change in AtomicFlushMemTablesToOutputFiles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4641
Differential Revision: D12943649
Pulled By: riversand963
fbshipit-source-id: c66a4a664a1e0938e938fd41edc5a70c34cdd868
Summary:
Rather than storing a `vector<RangeTombstone>`, we now store a
`vector<RangeTombstoneStack>` and a `vector<SequenceNumber>`. A
`RangeTombstoneStack` contains the start and end keys of a range tombstone
fragment, and indices into the seqnum vector to indicate which sequence
numbers the fragment is located at. The diagram below illustrates an
example:
```
tombstones_: [a, b) [c, e) [h, k)
| \ / \ / |
| \ / \ / |
v v v v
tombstone_seqs_: [ 5 3 10 7 2 8 6 ]
```
This format allows binary searching the tombstone list to use less key
comparisons, which helps in cases where there are many overlapping
tombstones. Also, this format makes it easier to add DBIter-like
semantics to `FragmentedRangeTombstoneIterator` in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4632
Differential Revision: D13053103
Pulled By: abhimadan
fbshipit-source-id: e8220cc712fcf5be4d602913bb23ace8ea5f8ef0
Summary:
DBTest.SanitizeNumThreads Sometimes fails. The test waited for 10ms timeout and expect all threads scheduled to be executed. This can be a source of flakiness. Make a check every 1ms and up to 10s.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4659
Differential Revision: D13074174
Pulled By: siying
fbshipit-source-id: b1d5ff87a326a4fc9eab8d1cc307bbb940dfe70c
Summary:
`GenSubcompactionBoundaries` calls `VersionSet::ApproximateSize` which gets BlockBasedTableReader for every file and seeks in its index block to find `key`'s offset. If the table or index block aren't in memory already, this involves I/O. This can be improved by releasing DB mutex when calling ApproximateSize.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4630
Differential Revision: D13052653
Pulled By: miasantreble
fbshipit-source-id: cae31d46d10d0860fa8a26b8d5154b2d17d1685f
Summary:
Currently transaction iterator does not apply `ReadOptions.iterate_upper_bound` when iterating. This PR attempts to fix the problem by having `BaseDeltaIterator` enforcing the upper bound check when iterator state is changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4656
Differential Revision: D13039257
Pulled By: miasantreble
fbshipit-source-id: 909eb9f6b4597a4d80418fb139f32ec82c6ec1d1
Summary:
Per offline discussion with siying, `MemoryAllocator` and `Cache` should be decouple. The idea is that memory allocator handles memory allocation, while cache handle cache policy.
It is normal that external cache libraries pack couple the two components for better optimization. If we want to integrate with such library in the future, we can make a wrapper of the library implementing both `Cache` and `MemoryAllocator` interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4676
Differential Revision: D13047662
Pulled By: yiwu-arbug
fbshipit-source-id: cd42e246d80ab600b4de47d073f7d2db308ce6dd
Summary:
We used to have a bug, which caused every block to be read twice, and none of our tests caught it. Add a very simply unit test to make sure that when reading a data block, we only issue one pread against the SST file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4657
Differential Revision: D13005260
Pulled By: siying
fbshipit-source-id: 03167b554ad2451192b1707415536d7d05e9026c
Summary:
he ratio of num_deletions to num_entries of a level can be useful to determine if a manual compaction needs to be triggered on a level.
Also refer #3980
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4623
Differential Revision: D13045744
Pulled By: sagar0
fbshipit-source-id: 71f3c8e363a8ffd194ec3bb0ed0b69612231f0b3
Summary:
Currently, `Statistics` can record tick by `recordTick()` whose second parameter is an `uint64_t`.
That means tick can only increase.
If we want to reduce tick, we have to work around like `RecordTick(statistics_, NO_ITERATORS, uint64_t(-1));`.
That's kind of a hack.
So, this PR divide `NO_ITERATORS` into two counters `NO_ITERATOR_CREATED` and `NO_ITERATOR_DELETE`, making the counters increase only.
Fixes#3013 .
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4498
Differential Revision: D10395010
Pulled By: sagar0
fbshipit-source-id: cfb523b22a37411c794b4e9da090f1ae30293db2
Summary:
Call `SyncClosedLogs()` only if there are more than one column families.
Update several unit tests (in `fault_injection_test` and `db_flush_test`) correspondingly.
See #3840 for more info.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4460
Differential Revision: D12896377
Pulled By: riversand963
fbshipit-source-id: f49afdaec32568f12f001219a3aec1dfde3b32bf
Summary:
Use the `DBOptions` that the backup engine already holds to figure out the right `EnvOptions` to use when reading the DB files. This means that, if a user opened a DB instance with `use_direct_reads=true`, then using `BackupEngine` to back up that DB instance will use direct I/O to read files when calculating checksums and copying. Currently the WALs and manifests would still be read using buffered I/O to prevent mixing direct I/O reads with concurrent buffered I/O writes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4640
Differential Revision: D13015268
Pulled By: ajkr
fbshipit-source-id: 77006ad6f3e00ce58374ca4793b785eea0db6269
Summary:
this PR adds two more per-level perf context counters to track
* number of keys returned in Get call, break down by levels
* total processing time at each level during Get call
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4617
Differential Revision: D12898024
Pulled By: miasantreble
fbshipit-source-id: 6b84ef1c8097c0d9e97bee1a774958f56ab4a6c4
Summary:
Our internal CI test caught RocksDB Lite build failures. The failures are due to a new test introduced in #4665 using `SSTFileWriter` and `IngestExternalFile`, but these is not exposed under lite mode. Fixed by #ifdef'ing out the test.
```
db/db_test2.cc: In member function ‘virtual void rocksdb::DBTest2_TestCompactFiles_Test::TestBody()’:
db/db_test2.cc:2907:3: error: ‘SstFileWriter’ is not a member of ‘rocksdb’
rocksdb::SstFileWriter sst_file_writer{rocksdb::EnvOptions(), options};
^
In file included from ./util/testharness.h:15:0,
from ./table/mock_table.h:23,
from ./db/db_test_util.h:44,
from db/db_test2.cc:13:
db/db_test2.cc:2912:13: error: ‘sst_file_writer’ was not declared in this scope
ASSERT_OK(sst_file_writer.Open(external_file1));
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4675
Differential Revision: D13035984
Pulled By: sagar0
fbshipit-source-id: c1ceac550dfac1a85eeea436693dc7dd467519a6
Summary:
Part of the test required that a compaction start before a
manual flush, but this was not enforced by the test. In some cases,
particularly when writing to tmpfs, this could lead to the compaction
starting after the flush, which caused the base level to be higher than
it was expected to be. Add a sync point in the test to ensure that the
flush and compaction happen simultaneously.
The test also had some stale comments, so those have been removed or
modified, and the test has been simplified so that it no longer uses sleeps
and writes uncompressed SSTs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4668
Differential Revision: D13032440
Pulled By: abhimadan
fbshipit-source-id: 3f23b583a096454dafb8d8ea75678605dec80209
Summary:
`CompactFiles` gets `SuperVersion` before `WaitForIngestFile`, while `IngestExternalFile` may add files that overlap with `input_file_names`
The timeline of execution flow is as follow:
Let's say that level N has two file [1,2] and [5,6]
```
timeline user_thread1 user_thread2
t0 | CompactFiles([1, 2], [5, 6]) begin
t1 | GetReferencedSuperVersion()
t2 | IngestExternalFile([3,4]) to level N begin
t3 | CompactFiles resume
V
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4665
Differential Revision: D13030674
Pulled By: ajkr
fbshipit-source-id: 8be19477fd6e505032267a979d32f3097cc3be51
Summary:
In the past, both `DBImpl::atomic_flush_` and
`DBImpl::immutable_db_options_.atomic_flush` exist. However, we fail to set
`immutable_db_options_.atomic_flush`, but use `DBImpl::atomic_flush_` which is
set correctly. This does not lead to incorrect behavior, but is a duplicate of
information.
Since `immutable_db_options_` is always there and has `atomic_flush`, we should
use it as source of truth and remove `DBImpl::atomic_flush_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4631
Differential Revision: D12928371
Pulled By: riversand963
fbshipit-source-id: f85a811959d3828aad4a3a1b05f71facf19c636d
Summary:
Hi, yiwu-arbug, I found that `DBImpl::GetColumnFamilyHandleUnlocked` still have data race condition, because `column_family_memtables_` has a stateful cache `current_` and `column_family_memtables_::Seek` maybe call without the protection of `mutex_` by a write thread
check 859dbda6e3/db/write_batch.cc (L1188) and 859dbda6e3/db/write_batch.cc (L1756) and 859dbda6e3/db/db_impl_write.cc (L318)
So it's better to use `versions_->GetColumnFamilySet()->GetColumnFamily` instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4666
Differential Revision: D13027117
Pulled By: yiwu-arbug
fbshipit-source-id: 4e3778eaf8e7f7c8577bbd78129b6a5fd7ce79fb
Summary:
The flakyness can be reproduced with the following patch:
```
--- a/db/db_impl_compaction_flush.cc
+++ b/db/db_impl_compaction_flush.cc
@@ -2013,6 +2013,9 @@ void DBImpl::BackgroundCallFlush() {
if (job_context.HaveSomethingToDelete()) {
PurgeObsoleteFiles(job_context);
}
+ static int f_count = 0;
+ printf("clean flush job context %d\n", ++f_count);
+ env_->SleepForMicroseconds(1000000);
job_context.Clean();
mutex_.Lock();
}
```
The issue is that FlushMemtable with opt.wait=true does not wait for `OnStallConditionsChanged` being called. The event listener is triggered on `JobContext::Clean`, which happens after flush result is installed. At the time we check for stall condition after flushing memtable, the job context cleanup may not be finished.
To fix the flaykyness, we use sync point to create a custom WaitForFlush that waits for context cleanup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4658
Differential Revision: D13007301
Pulled By: yiwu-arbug
fbshipit-source-id: d98395ee7b0ad4c62e83e8d0e9b6028058c61712
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
valgrind tests with 1 thread run too long. To make it shorter, black list some long tests. These are already blacklisted in parallel valgrind tests, but they are not in non-parallel mode
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4642
Differential Revision: D12945237
Pulled By: siying
fbshipit-source-id: 04cf977d435996480fe87aa09f14b17975b74f7d
Summary:
This property can help debug why SST files aren't being deleted. Previously we only had the property "rocksdb.is-file-deletions-enabled". However, even when that returned true, obsolete SSTs may still not be deleted due to the coarse-grained mechanism we use to prevent newly created SSTs from being accidentally deleted. That coarse-grained mechanism uses a lower bound file number for SSTs that should not be deleted, and this property exposes that lower bound.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4618
Differential Revision: D12898179
Pulled By: ajkr
fbshipit-source-id: fe68acc041ddbcc9276bbd48976524d95aafc776
Summary:
ExternalSSTFileTest.IngestNonExistingFile occasionally fail for number of SST files after manual compaction doesn't go down as expected. Although I don't find a reason how this can happen, adding an extra waiting to make sure obsolete file purging has finished before we check the files doesn't hurt.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4625
Differential Revision: D12910586
Pulled By: siying
fbshipit-source-id: 2a5ddec6908c99cf3bcc78431c6f93151c2cab59
Summary:
fix current failing lite test:
> In file included from ./util/testharness.h:15:0,
from ./table/mock_table.h:23,
from ./db/db_test_util.h:44,
from db/db_flush_test.cc:10:
db/db_flush_test.cc: In member function ‘virtual void rocksdb::DBFlushTest_ManualFlushFailsInReadOnlyMode_Test::TestBody()’:
db/db_flush_test.cc:250:35: error: ‘Properties’ is not a member of ‘rocksdb::DB’
ASSERT_TRUE(db_->GetIntProperty(DB::Properties::kBackgroundErrors,
^
make: *** [db/db_flush_test.o] Error 1
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4619
Differential Revision: D12898319
Pulled By: miasantreble
fbshipit-source-id: 72de603b1f2e972fc8caa88611798c4e98e348c6
Summary:
The new case is directIO = true, write_global_seqno = false in which we no longer write global_seqno to the external SST file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4614
Differential Revision: D12885001
Pulled By: riversand963
fbshipit-source-id: 7541bdc608b3a0c93d3c3c435da1b162b36673d4
Summary:
The logic to wait for stall conditions to clear before beginning a manual flush didn't take into account whether the DB was in read-only mode. In read-only mode the stall conditions would never clear since no background work is happening, so the wait would be never-ending. It's probably better to return an error to the user.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4615
Differential Revision: D12888008
Pulled By: ajkr
fbshipit-source-id: 1c474b42a7ac38d9fd0d0e2340ff1d53e684d83c
Summary:
A background compaction with pre-picked files (i.e., either a manual compaction or a bottom-pri compaction) fails when the DB is in read-only mode. In the failure handling, we forgot to unregister the compaction and the files it covered. Then subsequent manual compactions could conflict with this zombie compaction (possibly Halloween related) and wait forever for it to finish.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4611
Differential Revision: D12871217
Pulled By: ajkr
fbshipit-source-id: 9d24e921d5bbd2ee8c2c9536a30abfa42a220c6e
Summary:
Add unit tests to demonstrate that `VersionSet::Recover` is able to detect and handle cases in which the MANIFEST has valid atomic group, incomplete trailing atomic group, atomic group mixed with normal version edits and atomic group with incorrect size.
With this capability, RocksDB identifies non-valid groups of version edits and do not apply them, thus guaranteeing that the db is restored to a state consistent with the most recent successful atomic flush before applying WAL.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4433
Differential Revision: D10079202
Pulled By: riversand963
fbshipit-source-id: a0e0b8bf4da1cf68e044d397588c121b66c68876
Summary:
Since the number of range deletions are reported in
TableProperties, it is confusing to not report the number of merge
operands and point deletions as top-level properties; they are
accessible through the public API, but since they are not the "main"
properties, they do not appear in aggregated table properties, or the
string representation of table properties.
This change promotes those two property keys to
`rocksdb/table_properties.h`, adds corresponding uint64 members for
them, deprecates the old access methods `GetDeletedKeys()` and
`GetMergeOperands()` (though they are still usable for now), and removes
`InternalKeyPropertiesCollector`. The property key strings are the same
as before this change, so this should be able to read DBs written from older
versions (though I haven't tested this yet).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4594
Differential Revision: D12826893
Pulled By: abhimadan
fbshipit-source-id: 9e4e4fbdc5b0da161c89582566d184101ba8eb68
Summary:
EnableFileDeletions() does info logging inside db mutex. This is not recommended in the code base, since there could be I/O involved. Move this outside the DB mutex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4604
Differential Revision: D12834432
Pulled By: siying
fbshipit-source-id: ffe5c2626fcfdb4c54a661a3c3b0bc95054816cf
Summary:
When there's a gap between files, we do not need to output tombstones starting at the next output file's begin key to the current output file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4592
Differential Revision: D12808627
Pulled By: ajkr
fbshipit-source-id: 77c8b2e7523a95b1cd6611194144092c06acb505
Summary:
Since ErrorHandler::RecoverFromNoSpace is no-op in LITE mode, then we should
not have this test in LITE mode. If we do keep it, it will cause the test
thread to wait on bg_cv_ that will not be signalled.
How to reproduce
```
$make clean && git checkout a27fce408e
$OPT="-DROCKSDB_LITE -g" make -j20
$./db_io_failure_test --gtest_filter=DBIOFailureTest.NoSpaceCompactRange
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4596
Differential Revision: D12818516
Pulled By: riversand963
fbshipit-source-id: bc83524f40fff1e29506979017f7f4c2b70322f3
Summary:
For flush triggered by RocksDB due to memory usage approaching certain
threshold (WriteBufferManager or Memtable full), we should cut the memtable
only when the current active memtable is not empty, i.e. contains data. This is
what we do for non-atomic flush. If we always cut memtable even when the active
memtable is empty, we will generate extra, empty immutable memtable.
This is not ideal since it may cause write stall. It also causes some
DBAtomicFlushTest to fail because cfd->imm()->NumNotFlushed() is different from
expectation.
Test plan
```
$make clean && make J=1 -j32 all check
$make clean && OPT="-DROCKSDB_LITE -g" make J=1 -j32 all check
$make clean && TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make J=1 -j32 valgrind_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4595
Differential Revision: D12818520
Pulled By: riversand963
fbshipit-source-id: d867bdbeacf4199fdd642debb085f94703c41a18
Summary:
Rename the interface, as it is mean to be a generic interface for memory allocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4590
Differential Revision: D10866340
Pulled By: yiwu-arbug
fbshipit-source-id: 85cb753351a40cb856c046aeaa3f3b369eef3d16
