Summary:
... in Index and CompressionDict readers (Filters in another PR). no_io and verify_checksums should be inferred from ReadOptions rather than specified redundantly.
Fixes incomplete propagation of ReadOptions in
UncompressionDictReader::GetOrReadUncompressionDictionar so is technically a functional change. (Related to https://github.com/facebook/rocksdb/issues/12757)
Also there was hardcoded no verify_checksums in DumpTable, but only for UncompressionDict, which doesn't make sense. Now using consistent ReadOptions and verify_checksum can be controlled for more reads together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12761
Test Plan: existing tests
Reviewed By: hx235
Differential Revision: D58450392
Pulled By: pdillinger
fbshipit-source-id: 0faed22832d664cb3b04a4c03ee77119977c200b
Summary:
Currently, when files become obsolete, the block cache entries associated with them just age out naturally. With pure LRU, this is not too bad, as once you "use" enough cache entries to (re-)fill the cache, you are guranteed to have purged the obsolete entries. However, HyperClockCache is a counting clock cache with a somewhat longer memory, so could be more negatively impacted by previously-hot cache entries becoming obsolete, and taking longer to age out than newer single-hit entries.
Part of the reason we still have this natural aging-out is that there's almost no connection between block cache entries and the file they are associated with. Everything is hashed into the same pool(s) of entries with nothing like a secondary index based on file. Keeping track of such an index could be expensive.
This change adds a new, mutable CF option `uncache_aggressiveness` for erasing obsolete block cache entries. The process can be speculative, lossy, or unproductive because not all potential block cache entries associated with files will be resident in memory, and attempting to remove them all could be wasted CPU time. Rather than a simple on/off switch, `uncache_aggressiveness` basically tells RocksDB how much CPU you're willing to burn trying to purge obsolete block cache entries. When such efforts are not sufficiently productive for a file, we stop and move on.
The option is in ColumnFamilyOptions so that it is dynamically changeable for already-open files, and customizeable by CF.
Note that this block cache removal happens as part of the process of purging obsolete files, which is often in a background thread (depending on `background_purge_on_iterator_cleanup` and `avoid_unnecessary_blocking_io` options) rather than along CPU critical paths.
Notable auxiliary code details:
* Possibly fixing some issues with trivial moves with `only_delete_metadata`: unnecessary TableCache::Evict in that case and missing from the ObsoleteFileInfo move operator. (Not able to reproduce an current failure.)
* Remove suspicious TableCache::Erase() from VersionSet::AddObsoleteBlobFile() (TODO follow-up item)
Marked EXPERIMENTAL until more thorough validation is complete.
Direct stats of this functionality are omitted because they could be misleading. Block cache hit rate is a better indicator of benefit, and CPU profiling a better indicator of cost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12694
Test Plan:
* Unit tests added, including refactoring an existing test to make better use of parameterized tests.
* Added to crash test.
* Performance, sample command:
```
for I in `seq 1 10`; do for UA in 300; do for CT in lru_cache fixed_hyper_clock_cache auto_hyper_clock_cache; do rm -rf /dev/shm/test3; TEST_TMPDIR=/dev/shm/test3 /usr/bin/time ./db_bench -benchmarks=readwhilewriting -num=13000000 -read_random_exp_range=6 -write_buffer_size=10000000 -bloom_bits=10 -cache_type=$CT -cache_size=390000000 -cache_index_and_filter_blocks=1 -disable_wal=1 -duration=60 -statistics -uncache_aggressiveness=$UA 2>&1 | grep -E 'micros/op|rocksdb.block.cache.data.(hit|miss)|rocksdb.number.keys.(read|written)|maxresident' | awk '/rocksdb.block.cache.data.miss/ { miss = $4 } /rocksdb.block.cache.data.hit/ { hit = $4 } { print } END { print "hit rate = " ((hit * 1.0) / (miss + hit)) }' | tee -a results-$CT-$UA; done; done; done
```
Averaging 10 runs each case, block cache data block hit rates
```
lru_cache
UA=0 -> hit rate = 0.327, ops/s = 87668, user CPU sec = 139.0
UA=300 -> hit rate = 0.336, ops/s = 87960, user CPU sec = 139.0
fixed_hyper_clock_cache
UA=0 -> hit rate = 0.336, ops/s = 100069, user CPU sec = 139.9
UA=300 -> hit rate = 0.343, ops/s = 100104, user CPU sec = 140.2
auto_hyper_clock_cache
UA=0 -> hit rate = 0.336, ops/s = 97580, user CPU sec = 140.5
UA=300 -> hit rate = 0.345, ops/s = 97972, user CPU sec = 139.8
```
Conclusion: up to roughly 1 percentage point of improved block cache hit rate, likely leading to overall improved efficiency (because the foreground CPU cost of cache misses likely outweighs the background CPU cost of erasure, let alone I/O savings).
Reviewed By: ajkr
Differential Revision: D57932442
Pulled By: pdillinger
fbshipit-source-id: 84a243ca5f965f731f346a4853009780a904af6c
Summary:
Add support to strip timestamp in block based table builder and pad timestamp in block based table reader.
On the write path, use the per column family option `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` to indicate whether user-defined timestamps should be stripped for all block based tables created for the column family.
On the read path, added a per table `TableReadOption.user_defined_timestamps_persisted` to flag whether the user keys in the table contains user defined timestamps.
This patch is mostly passing the related flags down to the block building/parsing level with the exception of handling the `first_internal_key` in `IndexValue`, which is included in the `IndexBuilder` level. The value part of range deletion entries should have a similar handling, I haven't decided where to best fit this piece of logic, I will do it in a follow up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11495
Test Plan:
Existing test `BlockBasedTableReaderTest` is parameterized to run with:
1) different UDT test modes: kNone, kNormal, kStripUserDefinedTimestamp
2) all four index types, when index type is `kTwoLevelIndexSearch`, also enables partitioned filters
3) parallel vs non-parallel compression
4) enable/disable compression dictionary.
Also added tests for API `BlockBasedTableReader::NewIterator`.
`PartitionedFilterBlockTest` is parameterized to run with different UDT test modes:kNone, kNormal, kStripUserDefinedTimestamp.
```
make all check
./block_based_table_reader_test
./partitioned_filter_block_test
```
Reviewed By: ltamasi
Differential Revision: D46344577
Pulled By: jowlyzhang
fbshipit-source-id: 93ac8542b19319d1298712b8bed908c8831ba675
Summary:
### Context:
Background compactions and flush generate large reads and writes, and can be long running, especially for universal compaction. In some cases, this can impact foreground reads and writes by users.
### Solution
User, Flush, and Compaction reads share some code path. For this task, we update the rate_limiter_priority in ReadOptions for code paths (e.g. FindTable (mainly in BlockBasedTable::Open()) and various iterators), and eventually update the rate_limiter_priority in IOOptions for FSRandomAccessFile.
**This PR is for the Read path.** The **Read:** dynamic priority for different state are listed as follows:
| State | Normal | Delayed | Stalled |
| ----- | ------ | ------- | ------- |
| Flush (verification read in BuildTable()) | IO_USER | IO_USER | IO_USER |
| Compaction | IO_LOW | IO_USER | IO_USER |
| User | User provided | User provided | User provided |
We will respect the read_options that the user provided and will not set it.
The only sst read for Flush is the verification read in BuildTable(). It claims to be "regard as user read".
**Details**
1. Set read_options.rate_limiter_priority dynamically:
- User: Do not update the read_options. Use the read_options that the user provided.
- Compaction: Update read_options in CompactionJob::ProcessKeyValueCompaction().
- Flush: Update read_options in BuildTable().
2. Pass the rate limiter priority to FSRandomAccessFile functions:
- After calling the FindTable(), read_options is passed through GetTableReader(table_cache.cc), BlockBasedTableFactory::NewTableReader(block_based_table_factory.cc), and BlockBasedTable::Open(). The Open() needs some updates for the ReadOptions variable and the updates are also needed for the called functions, including PrefetchTail(), PrepareIOOptions(), ReadFooterFromFile(), ReadMetaIndexblock(), ReadPropertiesBlock(), PrefetchIndexAndFilterBlocks(), and ReadRangeDelBlock().
- In RandomAccessFileReader, the functions to be updated include Read(), MultiRead(), ReadAsync(), and Prefetch().
- Update the downstream functions of NewIndexIterator(), NewDataBlockIterator(), and BlockBasedTableIterator().
### Test Plans
Add unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9996
Reviewed By: anand1976
Differential Revision: D36452483
Pulled By: gitbw95
fbshipit-source-id: 60978204a4f849bb9261cb78d9bc1cb56d6008cf
Summary:
block_based_table_reader.cc is a giant file, which makes it hard for users to navigate the code. Divide the files to multiple files.
Some class templates cannot be moved to .cc file. They are moved to .h files. It is still better than including them all in block_based_table_reader.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6527
Test Plan: "make all check" and "make release". Also build using cmake.
Differential Revision: D20428455
fbshipit-source-id: ca713c698469f07f35bc0c271358c0874ed4eb28
