Summary:
After replaying the WALs, the memtables are flushed synchronously to L0 instead of being flushed in background. Currently, we only track WAL obsoletion events in the code path of background flush jobs. This PR tracks these events in RecoverLogFiles.
After this change, we can enable `track_and_verify_wal_in_manifest` in `db_stress`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7649
Test Plan: `python tools/db_crashtest.py whitebox`
Reviewed By: riversand963
Differential Revision: D24824501
Pulled By: cheng-chang
fbshipit-source-id: 207129f7b845c50b333680ce6818a68a2fad54b9
Summary:
Consider the following sequence of events:
1. Db flushed an SST with file number N, appended to MANIFEST, and tried to sync the MANIFEST.
2. Syncing MANIFEST failed and db crashed.
3. Db tried to recover with this MANIFEST. In the meantime, no entry about the newly-flushed SST was found in the MANIFEST. Therefore, RocksDB replayed WAL and tried to flush to an SST file reusing the same file number N. This failed because file system does not support overwrite. Then Db deleted this file.
4. Db crashed again.
5. Db tried to recover. When db read the MANIFEST, there was an entry referencing N.sst. This could happen probably because the append in step 1 finally reached the MANIFEST and became visible. Since N.sst had been deleted in step 3, recovery failed.
It is possible that N.sst created in step 1 is valid. Although step 3 would still fail since the MANIFEST was not synced properly in step 1 and 2, deleting N.sst would make it impossible for the db to recover even if the remaining part of MANIFEST was appended and visible after step 5.
After this PR, in step 3, immediately after recovering from MANIFEST, a new MANIFEST is created, then we find that N.sst is not referenced in the MANIFEST, so we delete it, and we'll not reuse N as file number. Then in step 5, since the new MANIFEST does not contain N.sst, the recovery failure situation in step 5 won't happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7621
Test Plan:
1. some tests are updated, because these tests assume that new MANIFEST is created after WAL recovery.
2. a new unit test is added in db_basic_test to simulate step 3.
Reviewed By: riversand963
Differential Revision: D24668144
Pulled By: cheng-chang
fbshipit-source-id: 90d7487fbad2bc3714f5ede46ea949895b15ae3b
Summary:
* Fully optimized StandardHasher, in terms of efficiently generating Start, CoeffRow, and ResultRow from a stock hash value, with sufficient independence between them to have no measurably degraded behavior. (Degraded behavior would be an FP rate higher than explainable by 2^-b and, if using a 32-bit stock hash function, expected stock hash collisions.) Details in code comments.
* Our standard 64-bit and 32-bit hash functions do not exhibit sufficient independence on sequential seeds (for one Ribbon construction attempt to have independent probability from the next). I have worked around this in the Ribbon code by "pre-mixing" "ordinal seeds," sequentially tried and appropriate for storage in persisted metadata, into "raw seeds," ready for application and appropriate for in-memory storage. This way the pre-mixing step (though fast) is only applied on loading or configuring the structure, not on each query or banding add.
* Fix a subtle flaw in which backtracking not clearing ResultRow data could lead to elevated FP rate on keys that were backtracked on and should (for generality) exhibit the same FP rate as novel keys.
* Added a basic test for PhsfQuery and construction algorithms (map or "retrieval structure" rather than set or filter), and made a few trivial related fixes.
* Better random configuration generation in unit tests
* Some other minor cleanup / clarification / etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7635
Test Plan: unit tests included
Reviewed By: jay-zhuang
Differential Revision: D24738978
Pulled By: pdillinger
fbshipit-source-id: f9d03599d9e2ca3e30e9d3e7d81cd936b56f76f0
Summary:
When a WAL is synced, an edit is written to MANIFEST.
After flushing memtables, the obsoleted WALs are piggybacked to MANIFEST while writing the new L0 files to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7601
Test Plan:
`track_and_verify_wals_in_manifest` is enabled by default for all tests extending `DBBasicTest`, and in db_stress_test.
Unit test `wal_edit_test`, `version_edit_test`, and `version_set_test` are also updated.
Watch all tests to pass.
Reviewed By: ltamasi
Differential Revision: D24553957
Pulled By: cheng-chang
fbshipit-source-id: 66a569ff1bdced38e22900bd240b73113906e040
Summary:
The test often times out in internal test infra.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7640
Test Plan: watch test to pass internally
Reviewed By: anand1976
Differential Revision: D24764928
Pulled By: cheng-chang
fbshipit-source-id: 587f2afc97f52909837943fd938a86ca94544b2c
Summary:
In this test, after flushing memtable, it will read directly from the sst files, so `env_do_fsync` was `true` to ensure that the flushed sst files can be read afterwards. Considering that the test does not last long, the data should be available in os buffer even without fsync, so this PR tries to disable fsync to reduce test time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7639
Test Plan: watch the test to pass in internal infra
Reviewed By: anand1976
Differential Revision: D24764689
Pulled By: cheng-chang
fbshipit-source-id: ef827611a3eaca04201e4280ae801d6c8e60c138
Summary:
The tests often times out in internal infra, skipping fsync should reduce test time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7641
Test Plan: watch existing tests to pass
Reviewed By: anand1976
Differential Revision: D24765098
Pulled By: cheng-chang
fbshipit-source-id: c62bf8110361aee901918d632cf4772435d05e8d
Summary:
This test often times out in internal test infra.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7637
Test Plan: watch test to pass
Reviewed By: ajkr
Differential Revision: D24763939
Pulled By: cheng-chang
fbshipit-source-id: 6564ee2ef637e9faf6688d4b6a5d74a72a51c5e8
Summary:
The original test nests a lot of `try` blocks. This PR flattens these blocks into independent blocks, so that each `try` block closes the DB before opening the next DB instance.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7608
Test Plan: watch the existing java tests to pass
Reviewed By: zhichao-cao
Differential Revision: D24611621
Pulled By: cheng-chang
fbshipit-source-id: d486c5d37ac25d4b860d739ef2cdd58e6064d42d
Summary:
`llvm-mirror/clang` is archived. Get the `clang-format-diff.py` file from the active source.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7609
Reviewed By: ajkr
Differential Revision: D24711608
Pulled By: pdillinger
fbshipit-source-id: b115d8765ff23fbb8190290a170de21565daba84
Summary:
In `BuildTable()`, we call `builder->Finish()` before evaluating `builder->NeedCompact()`.
However, we call `builder->NeedCompact()` before `builder->Finish()` in compaction job. This can be wrong because the table properties collectors may rely on the success of `Finish()` to provide correct result for `NeedCompact()`.
Test plan (on devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7627
Reviewed By: ajkr
Differential Revision: D24728741
Pulled By: riversand963
fbshipit-source-id: 5a0dce244e14eb1106c4f87021e6bebca82b486e
Summary:
Existing API `VerifyChecksum()` allows application to verify sst files' block checksums.
Since whole file, user-specified checksum is tracked in MANIFEST, we can expose a new
API to verify sst files' file checksums.
```
// Compute table file checksums if applicable and compare with MANIFEST.
// Returns OK if no file has mismatching whole-file checksum.
Status DB::VerifyFileChecksums(const ReadOptions& /*read_options*/);
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7578
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D24436783
Pulled By: riversand963
fbshipit-source-id: 52b51519b842f2b3c4e3351998a97c86cbec85b3
Summary:
The core algorithms for InterleavedSolutionStorage and the
implementation SerializableInterleavedSolution make Ribbon fast for
filter queries. Example output from new unit test:
Simple outside query, hot, incl hashing, ns/key: 117.796
Interleaved outside query, hot, incl hashing, ns/key: 42.2655
Bloom outside query, hot, incl hashing, ns/key: 24.0071
Also includes misc cleanup of previous Ribbon code and comments.
Some TODOs and FIXMEs remain for futher work / investigation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7598
Test Plan: unit tests included (integration work and tests coming later)
Reviewed By: jay-zhuang
Differential Revision: D24559209
Pulled By: pdillinger
fbshipit-source-id: fea483cd354ba782aea3e806f2bc96e183d59441
Summary:
Recent test report shows that some tests have been skipped.
For DBWALTest that inherits from DBTestBase, the following will always be
true, since `env_` is an instance of `SpecialEnv`, not `Env::Default()`. Thus the test
will always be skipped.
```
if (options.env != Env::Default()) {
ROCKSDB_GTEST_SKIP("Test requires default environment");
return;
}
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7628
Test Plan:
./db_wal_test --gtest_filter=DBWALTest.TruncateLastLogAfterRecoverWithoutFlush
MEM_ENV=1 ./db_wal_test --gtest_filter=DBWALTest.TruncateLastLogAfterRecoverWithoutFlush
make check
Reviewed By: jay-zhuang
Differential Revision: D24693006
Pulled By: riversand963
fbshipit-source-id: 7f2a772492a0f11bff17bbf5e9f493e9e9a1c125
Summary:
The filter query key should not contain timestamp. The timestamp is
stripped for Get(), but not MultiGet().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7589
Reviewed By: riversand963
Differential Revision: D24494661
Pulled By: jay-zhuang
fbshipit-source-id: fc5ff40f9d683a89a760c6ff0ab3aed05a70c317
Summary:
Test report shows that this test has been skipped recently due to
a condition that will never meet. `env_` is not equal to
`Env::Default()` for DBTest2 that inherits from DBTestBase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7629
Test Plan:
make check
./db_test2 --gtest_filter=DBTest2.PinnableSliceAndMmapReads
Reviewed By: jay-zhuang
Differential Revision: D24693317
Pulled By: riversand963
fbshipit-source-id: b1bbd5c1e05a6fa57c1de0d74462b69e3c2d5215
Summary:
In dictionary compression's initial implementation, in order to save CPU overhead, we only enabled it
for bottom level under the assumption that the vast majority of data is
stored there. At that time, there was no
such thing as `ColumnFamilyOptions::bottommost_compression_opts`, so we just
hardcoded disabling dictionary compression in flush and compactions to
non-bottommost level. Now, we have users who generate all their files
through flush and are considering using dictionary compression.
To support such a use case, this PR expands the scope of `ColumnFamilyOptions::compression_opts` to
additionally include flushed files and files generated by compaction to
a non-bottommost level. Users can still get the old behavior by moving
their dictionary settings to `ColumnFamilyOptions::bottommost_compression_opts`
and explicitly enabling both that and `ColumnFamilyOptions::bottommost_compression`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7619
Reviewed By: ltamasi
Differential Revision: D24665610
Pulled By: ajkr
fbshipit-source-id: 656b90bce1033fe21c71e09af931ef5bde3e464c
Summary:
The recently reverted behavior changes were released to at least one
place internally, so we should mention the reverts in release notes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7617
Reviewed By: akankshamahajan15
Differential Revision: D24654343
Pulled By: ajkr
fbshipit-source-id: eb64b2797d8508cd95a2dc2698122c1be29ce817
Summary:
This is a PR generated **semi-automatically** by an internal tool to remove unused includes and `using` statements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7604
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D24579392
Pulled By: riversand963
fbshipit-source-id: c4bfa6c6b08da1de186690d37eb73d8fff45aecd
Summary:
CreateFileChecksumGenerator may uses requested_checksum_func_name in generator context to decide which generator will be used. GenerateOneFileChecksum has not being updated to use it, which will always get the generator when the name is empty. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7586
Test Plan: make check
Reviewed By: riversand963
Differential Revision: D24491989
Pulled By: zhichao-cao
fbshipit-source-id: d9fdfdd431240f0a9a2e781ddbd48a7d6c609aad
Summary:
Fixes Issue https://github.com/facebook/rocksdb/issues/7497
When allow_data_in_errors db_options is set, log error key details in `ParseInternalKey()`
Have fixed most of the calls. Have few TODOs still pending - because have to make more deeper changes to pass in the allow_data_in_errors flag. Will do those in a separate PR later.
Tests:
- make check
- some of the existing tests that exercise the "internal key too small" condition are: dbformat_test, cuckoo_table_builder_test
- some of the existing tests that exercise the corrupted key path are: corruption_test, merge_helper_test, compaction_iterator_test
Example of new status returns:
- Key too small - `Corrupted Key: Internal Key too small. Size=5`
- Corrupt key with allow_data_in_errors option set to false: `Corrupted Key: '<redacted>' seq:3, type:3`
- Corrupt key with allow_data_in_errors option set to true: `Corrupted Key: '61' seq:3, type:3`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7515
Reviewed By: ajkr
Differential Revision: D24240264
Pulled By: ramvadiv
fbshipit-source-id: bc48f5d4475ac19d7713e16df37505b31aac42e7
Summary:
A user who extended `Logger` recently pointed out it is unusual to
require they implement the two-argument `Logv()` overload when they've
already implemented the three-argument `Logv()` overload. I agree with
that and think we can fix it by only calling the two-argument overload
from the default implementation of the three-argument overload. Then
when the three-argument overload is overridden, RocksDB would not
rely on the two-argument overload. Only `Logger::LogHeader()` needed
adjustment to achieve this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7605
Reviewed By: riversand963
Differential Revision: D24584749
Pulled By: ajkr
fbshipit-source-id: 9aabe040ac761c4c0dbebc4be046967403ecaf21
Summary:
My previous change to use lib2to3 to migrate clang-format-diff.py
for Python 2 only works if there's nothing to reformat. Instead, give
instructions to download to REPO_ROOT.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7603
Test Plan: Try the instructions on a fresh CentOS 8 devserver
Reviewed By: riversand963
Differential Revision: D24569608
Pulled By: pdillinger
fbshipit-source-id: 1410ba163e016b226e883dec93fae3df9ed0eab2
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
Currently, the following interleaving of events can lead to SuperVersion containing both immutable memtables as well as the resulting L0. This can cause Get to return incorrect result if there are merge operands. This may also affect other operations such as single deletes.
```
time main_thr bg_flush_thr bg_compact_thr compact_thr set_opts_thr
0 | WriteManifest:0
1 | issue compact
2 | wait
3 | Merge(counter)
4 | issue flush
5 | wait
6 | WriteManifest:1
7 | wake up
8 | write manifest
9 | wake up
10 | Get(counter)
11 | remove imm
V
```
The reason behind is that: one bg flush thread's installing new `Version` can be batched and performed by another thread that is the "leader" MANIFEST writer. This bg thread removes the memtables from current super version only after `LogAndApply` returns. After the leader MANIFEST writer signals (releasing mutex) this bg flush thread, it is possible that another thread sees this cf with both memtables (whose data have been flushed to the newest L0) and the L0 before this bg flush thread removes the memtables.
To address this issue, each bg flush thread can pass a callback function to `LogAndApply`. The callback is responsible for removing the memtables. Therefore, the leader MANIFEST writer can call this callback and remove the memtables before releasing the mutex.
Test plan (devserver)
```
$make merge_test
$./merge_test --gtest_filter=MergeTest.MergeWithCompactionAndFlush
$make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6069
Reviewed By: cheng-chang
Differential Revision: D18790894
Pulled By: riversand963
fbshipit-source-id: e41bd600c0448b4f4b2deb3f7677f95e3076b4ed
Summary:
Similarly to how https://github.com/facebook/rocksdb/issues/7345
integrated blob file writing into the flush process,
the patch adds support for writing blob files to the compaction logic.
Namely, if `enable_blob_files` is set, large values encountered during
compaction are extracted to blob files and replaced with blob indexes.
The resulting blob files are then logged to the MANIFEST as part of the
compaction job's `VersionEdit` and added to the `Version` alongside any
table files written by the compaction. Any errors during blob file building fail
the compaction job.
There will be a separate follow-up patch to perform blob garbage collection
during compactions.
In addition, the patch continues to chip away at the mess around computing
various compaction related statistics by eliminating some code duplication
and by making the `num_output_files` and `bytes_written` stats more consistent
for flushes, compactions, and recovery.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7573
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24404696
Pulled By: ltamasi
fbshipit-source-id: 21216af3a172ad3ce8f85d11cd30923784ae426c
Summary:
This is intended as the first commit toward a near-optimal alternative to static Bloom filters for SSTs. Stephan Walzer and I have agreed upon the name "Ribbon" for a PHSF based on his linear system construction in "Efficient Gauss Elimination for Near-Quadratic Matrices with One Short Random Block per Row, with Applications" ("SGauss") and my much faster "on the fly" algorithm for gaussian elimination (or for this linear system, "banding"), which can be faster than peeling while also more compact and flexible. See util/ribbon_alg.h for more detailed introduction and background. RIBBON = Rapid Incremental Boolean Banding ON-the-fly
This commit just adds generic (templatized) core algorithms and a basic unit test showing some features, including the ability to construct structures within 2.5% space overhead vs. information theoretic lower bound. (Compare to cache-local Bloom filter's ~50% space overhead -> ~30% reduction anticipated.) This commit does not include the storage scheme necessary to make queries fast, especially for filter queries, nor fractional "result bits", but there is some description already and those implementations will come soon. Nor does this commit add FilterPolicy support, for use in SST files, but that will also come soon.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7491
Reviewed By: jay-zhuang
Differential Revision: D24517954
Pulled By: pdillinger
fbshipit-source-id: 0119ee597e250d7e0edd38ada2ba50d755606fa7
Summary:
Add a threshold timestamp, full_history_ts_low_ of type `std::string*` to
`CompactionIterator`, so that RocksDB can also perform garbage collection during
compaction.
* If full_history_ts_low_ is nullptr, then compaction iterator does not perform
GC, preserving all timestamp history for all keys. Compaction iterator will
treat user key with different timestamps as different user keys.
* If full_history_ts_low_ is not nullptr, then compaction iterator performs
GC. GC will look at keys older than `*full_history_ts_low_` and determine their
eligibility based on factors including snapshots.
Current rules of GC:
* If an internal key is in the same snapshot as a previous counterpart
with the same user key, and this key is eligible for GC, and the key is
not single-delete or merge operand, then this key can be dropped. Note
that the previous internal key cannot be a merge operand either.
* If a tombstone is the most recent one in the earliest snapshot and it
is eligible for GC, and keyNotExistsBeyondLevel() is true, then this
tombstone can be dropped.
* If a tombstone is the most recent one in a snapshot and it is eligible
for GC, and the compaction is at bottommost level, then all other older
internal keys of the same user key must also be eligible for GC, thus
can be dropped
* Single-delete, delete-range and merge are not currently supported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7556
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D24507728
Pulled By: riversand963
fbshipit-source-id: 3c09c7301f41eed76dfcf4d1527e68cf6e0a8bb3
Summary:
This PR makes it able to `LogAndApply` `VersionEdit`s related to WALs, and also be able to `Recover` from MANIFEST with WAL related `VersionEdit`s.
The `VersionEdit`s related to WAL are treated similarly as those related to column family operations, they are not applied to versions, but can be in a commit group. Mixing WAL related `VersionEdit`s with other types of edits will make logic in `ProcessManifestWrite` more complicated, so `VersionEdit`s related to WAL can either be WAL additions or deletions, like column family add and drop.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7256
Test Plan: a set of unit tests are added in `version_set_test.cc`
Reviewed By: riversand963
Differential Revision: D23123238
Pulled By: cheng-chang
fbshipit-source-id: 246be2ed4744fd03fa2738aba408aaa611d0379c
Summary:
To minimize dependencies for Ribbon filter code in progress,
core part of coding.h for fixed sizes has been moved to coding_lean.h.
Also, generic versions of these functions have been added to math128.h
(since the generic versions are likely only to be used along with
Unsigned128).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7587
Test Plan: Unit tests added for new functions
Reviewed By: jay-zhuang
Differential Revision: D24486718
Pulled By: pdillinger
fbshipit-source-id: a69768f742379689442135fa52237c01dfe2647e
Summary:
In addition to trace block cache access, we want to support trace queries on MySQL. To achieve that StartTrace and EndTrace need to be added to the stackable_db.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7585
Reviewed By: zhichao-cao
Differential Revision: D24482306
Pulled By: nmjnmjnmj
fbshipit-source-id: de641b4837c64cd33b44b5bebaeae5d1527c8c31
Summary:
As suggested by pdillinger ,The name of kLogFile is misleading, in some tests, kLogFile is defined as info log. Replace it with kWalFile and move it to public, which will be used in https://github.com/facebook/rocksdb/issues/7523
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7580
Test Plan: make check
Reviewed By: riversand963
Differential Revision: D24485420
Pulled By: zhichao-cao
fbshipit-source-id: 955e3dacc1021bb590fde93b0a568ffe9ad80799
Summary:
This commit makes https://github.com/facebook/rocksdb/issues/6262's code change tidier and easier to understand by:
1. Wrapping parallel compression initialization and termination into
common methods;
2. Wrapping BlockRep initialization, push/pop into common methods;
3. Wrapping file size estimation into common methods;
4. Fixing function declarations that use non-const reference;
5. Fixing some uninitialized variables;
6. Fixing first_block data race;
7. Making BlockRep::status check in BlockBasedTableBuilder::Finish only present
if ok();
8. Making assert(ok()) in BlockBasedTableBuilder::CompressAndVerifyBlock only
present in non-parallel compression mode. In parallel compression mode,
compression will abort if status is not OK;
9. Eliminating potential data race caused by BlockBasedTableBuilder::GetStatus()
and BlockBasedTableBuilder::GetIOStatus() by returning status copy instead of
unprotected reference.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6888
Reviewed By: ajkr
Differential Revision: D21957110
Pulled By: jay-zhuang
fbshipit-source-id: 3a29892f249209513f030349756cecd7736eae80
Summary:
Remove function calling in assert statement as assert is a no
op in opt build and that function might not be called. This causes hang
in closing RocksDB when refit level is set.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7581
Test Plan: make check -j64
Reviewed By: riversand963
Differential Revision: D24466420
Pulled By: akankshamahajan15
fbshipit-source-id: 97db4ec5a95ae693c3290e176a3c12a9b1ad2f6d
Summary:
When `ASSERT_STATUS_CHECKED` is enabled, `transaction_test` does not pass without this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7572
Test Plan: `ASSERT_STATUS_CHECKED=1 make -j32 transaction_test && ./transaction_test`
Reviewed By: zhichao-cao
Differential Revision: D24404319
Pulled By: cheng-chang
fbshipit-source-id: 13689035995366ab06d8eada3ea404e45fef8bc5
Summary:
Further refinement of the earlier PR. Now the Status is NotFound with a subcode of PathNotFound. Also the existing functions for options parsing/loading are reverted to return InvalidArgument no matter in which way the user-provided arguments are deemed invalid.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7563
Reviewed By: zhichao-cao
Differential Revision: D24422491
Pulled By: ajkr
fbshipit-source-id: ba6b237cd0584d3f925c5ba0d349aeb8c250af67
Summary:
Ignore read error in 'FilePrefetchBuffer::TryReadFromCache' as status is ignored
and bool value is returned. Return error if prefetch fails in
'PrefetchTail' as we have planned to return Prefetch failures to users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7574
Test Plan:
make check -j64,
python -u tools/db_crashtest.py blackbox
Reviewed By: zhichao-cao
Differential Revision: D24408825
Pulled By: akankshamahajan15
fbshipit-source-id: feebda771415998253fbe54632f13e6e75b7a243
Summary:
This PR adds support for writing a location identifier of the DB host to SST files as a table property. By default, the hostname is used, but can be overridden by the user. There have been some recent corruptions in files written by ```SstFileWriter``` before checksumming, so this property can be used to trace it back to the writing host and checking the host for hardware isues.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7479
Test Plan: Add new unit tests
Reviewed By: pdillinger
Differential Revision: D24340671
Pulled By: anand1976
fbshipit-source-id: 2038949fd8d160c0633ccb4f9da77740f19fa2a2
Summary:
In order to be able to introduce more locking protocols, we need to abstract out the locking subsystem in TransactionDB into a set of interfaces.
PR https://github.com/facebook/rocksdb/pull/7013 introduces interface `LockTracker`. This PR is a follow up to take the first step to abstract out a `LockManager` interface.
Further modifications to the interface may be needed when introducing the first implementation of range lock. But the idea here is to put the range lock implementation based on range tree under the `utilities/transactions/lock/range/range_tree`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7532
Test Plan: point_lock_manager_test
Reviewed By: ajkr
Differential Revision: D24238731
Pulled By: cheng-chang
fbshipit-source-id: 2a9458cd8b3fb008d9529dbc4d3b28c24631f463
Cheng Chang