Summary:
Current posix advice implementation ties up the access pattern hint with the creation of a file.
It is not possible to apply different advice for different access (random get vs compaction read),
without keeping two open files for the same table. This patch extended the RandomeAccessFile interface
to accept new access hint at anytime. Particularly, we are able to set different access hint on the same
table file based on when/how the file is used.
Two options are added to set the access hint, after the file is first opened and after the file is being
compacted.
Test Plan: make check; db_stress; db_bench
Reviewers: dhruba
Reviewed By: dhruba
CC: MarkCallaghan, leveldb
Differential Revision: https://reviews.facebook.net/D10905
Summary: Enhance the statitics to report the number of open db iterators.
Test Plan: make check
Reviewers: haobo, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10983
Summary: Overriding block_size_deviation to zero, so that CorruptionTest can pass.
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D10977
Summary: a new option block_size_deviation is added.
Test Plan: run db_test and db_bench
Reviewers: dhruba, haobo
Reviewed By: haobo
Differential Revision: https://reviews.facebook.net/D10821
Summary: MaybeDumpStats was causing lock problem
Test Plan: make check; db_stress
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D10935
Summary:
Added an option stats_dump_period_sec to dump leveldb.stats to LOG periodically for diagnosis.
By defauly, it's set to a very big number 3600 (1 hour).
Test Plan: make check;
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, zshao
Differential Revision: https://reviews.facebook.net/D10761
Summary: There was an artifical limit on the size of the write buffer size.
Test Plan: make check
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10911
Summary:
The valgrind errors were in the unit tests where we change the
number of levels of a database using internal methods.
Test Plan:
valgrind ./reduce_levels_test
valgrind ./db_test
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10893
Summary: Make Statistics usable by client
Test Plan: make check; db_bench
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D10899
Summary:
Currently, with paranoid_check on, DB::Open will fail on any log read error on recovery.
If client is ok with losing most recent updates, we could simply skip those errors.
However, it's important to introduce an additional flag, so that paranoid_check can
still guard against more serious problems.
Test Plan: make check; db_stress
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb, emayanke
Differential Revision: https://reviews.facebook.net/D10869
Summary:
There is an existing field Options.max_bytes_for_level_multiplier that
sets the multiplier for the size of each level in the database.
This patch introduces the ability to set different multipliers
for every level in the database. The size of a level is determined
by using both max_bytes_for_level_multiplier as well as the
per-level fanout.
size of level[i] = size of level[i-1] * max_bytes_for_level_multiplier
* fanout[i-1]
The default value of fanout is 1, so that it is backward compatible.
Test Plan: make check
Reviewers: haobo, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10863
Summary:
The merge operator diff introduced a performance problem in MemTable::Get.
An exit condition is missed when the current key does not match the user key.
This could lead to full memtable scan if the user key is not found.
Test Plan: make check; db_bench
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10851
Summary:
Make stop watch a simple implementation, instead of subclass of a virtual class
Allocate stop watches off the stack instead of heap.
Code is more terse now.
Test Plan: make all check, db_bench with --statistics=1
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10809
Summary: Statistics.h and histogram.h had double based api's to record values. Remove them as they are not used anywhere
Test Plan: make all check
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10815
Summary:
This diff replaces compaction_filter_args and CompactionFilter with a single compaction_filter parameter. It gives CompactionFilter better encapsulation and a similar look to Comparator and MergeOpertor, which improves consistency of the overall interface.
The change is not backward compatible. Nevertheless, the two references in fbcode are not in production yet.
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, zshao
Differential Revision: https://reviews.facebook.net/D10773
Summary:
Currently, compaction filter is run on internal key older than the oldest snapshot, which is incorrect.
Compaction filter should really be run on the most recent internal key when there is no external snapshot.
Test Plan: make check; db_stress
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D10641
Summary:
For level-0 compactions, we try to find if can include more L0 files
in the same compaction run. This causes the 'smallest' and 'largest'
key to get extended to a larger range. But the suceeding call to
ParentRangeInCompaction() was still using the earlier
values of 'smallest' and 'largest',
Because of this bug, a file in L1 can be part of two concurrent
compactions: one L0-L1 compaction and the other L1-L2 compaction.
This should not cause any data loss, but will cause an assertion
failure with debug builds.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D10677
Summary:
WAL files are moved to archive directory and clear only at DB::Open.
Can lead to a lot of space consumption in a Database. Added logic to periodically clear Archive Directory too.
Test Plan: make all check + add unit test
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10617
Summary:
This diff introduces a new Merge operation into rocksdb.
The purpose of this review is mostly getting feedback from the team (everyone please) on the design.
Please focus on the four files under include/leveldb/, as they spell the client visible interface change.
include/leveldb/db.h
include/leveldb/merge_operator.h
include/leveldb/options.h
include/leveldb/write_batch.h
Please go over local/my_test.cc carefully, as it is a concerete use case.
Please also review the impelmentation files to see if the straw man implementation makes sense.
Note that, the diff does pass all make check and truly supports forward iterator over db and a version
of Get that's based on iterator.
Future work:
- Integration with compaction
- A raw Get implementation
I am working on a wiki that explains the design and implementation choices, but coding comes
just naturally and I think it might be a good idea to share the code earlier. The code is
heavily commented.
Test Plan: run all local tests
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb, zshao, sheki, emayanke, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D9651
Summary:
The current code has a bug that take address of stack allocated LogReporter.
It is causing SIGSEGV because the stack address is no longer valid when referenced.
Test Plan: Tested on prod.
Reviewers: haobo, dhruba, heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D10557
Summary: $title
Test Plan: make db_bench . run db_bench and check for expected output
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10521
Summary:
- don't see a point exposing table.h to the public.
- fixed make clean to remove also *.d files.
Test Plan: make check; db_stress
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10479
Summary: D8943 Broke read_missing. Fix it by adding a "." at the end of the generated key
Test Plan: generate, print and check the key has a "."
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10455
Summary:
- removed the compaction_filter_value from the callback interface. Restrict compaction filter to purging values.
- modify some comments to reflect curent status.
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10335
Summary:
Adds the --writes_per_second rate limit for the readwhilewriting test.
The purpose is to optionally avoid saturating storage with writes & compaction
and test read response time when some writes are being done.
Changes the histogram code to also print the p99.99 value
Task ID: #
Blame Rev:
Test Plan:
make check, ran db_bench with it
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10305
Summary:
This diff provides the ability to print out a stacktrace when the process receives certain signals.
Currently, we enable this for the following signals (program error related):
SIGILL SIGSEGV SIGBUS SIGABRT
Application simply #include "util/stack_trace.h" and call leveldb::InstallStackTraceHandler() during initialization, if signal handler is needed. It's not done automatically when openning db, because it's the application(process)'s responsibility to install signal handler and some applications might already have their own (like fbcode).
Sample output:
Received signal 11 (Segmentation fault)
#0 0x408ff0 ./signal_test() [0x408ff0] /home/haobo/rocksdb/util/signal_test.cc:4
#1 0x40827d ./signal_test() [0x40827d] /home/haobo/rocksdb/util/signal_test.cc:24
#2 0x7f8bb183172e /usr/local/fbcode/gcc-4.7.1-glibc-2.14.1/lib/libc.so.6(__libc_start_main+0x10e) [0x7f8bb183172e] ??:0
#3 0x408ebc ./signal_test() [0x408ebc] /home/engshare/third-party/src/glibc/glibc-2.14.1/glibc-2.14.1/csu/../sysdeps/x86_64/elf/start.S:113
Segmentation fault (core dumped)
For each frame, we print the raw pointer, the symbol provided by backtrace_symbols (still not good enough), and the source file/line. Note that address translation is done by directly shell out to addr2line. ??:0 means addr2line fails to do the translation. Hacky, but I think it's good for now.
Test Plan: signal_test.cc
Reviewers: dhruba, MarkCallaghan
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10173
Summary: A better error message. A local change. Did not look at other places where this could be done.
Test Plan: compile
Reviewers: dhruba, MarkCallaghan
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10251
Summary: Simplified level_ptrs by using a std:vector
Test Plan: make check
Reviewers: sheki, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10245
Summary:
FindObsoleteFiles was slow, holding the single big lock, resulted in bad p99 behavior.
Didn't profile anything, but several things could be improved:
1. VersionSet::AddLiveFiles works with std::set, which is by itself slow (a tree).
You also don't know how many dynamic allocations occur just for building up this tree.
switched to std::vector, also added logic to pre-calculate total size and do just one allocation
2. Don't see why env_->GetChildren() needs to be mutex proteced, moved to PurgeObsoleteFiles where
mutex could be unlocked.
3. switched std::set to std:unordered_set, the conversion from vector is also inside PurgeObsoleteFiles
I have a feeling this should pretty much fix it.
Test Plan: make check; db_stress
Reviewers: dhruba, heyongqiang, MarkCallaghan
Reviewed By: dhruba
CC: leveldb, zshao
Differential Revision: https://reviews.facebook.net/D10197
Summary: using unique_ptr to have automatic delete for probableWALfiles in db_impl.cc
Test Plan: make
Reviewers: sheki, dhruba
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10083
Summary:
The segfault was happening because the program was unable to open a new
sst file (as part of the compaction) because the process ran out of
file descriptors.
The fix is to check the return status of the file creation before taking
any other action.
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fabf03f9700 (LWP 29904)]
leveldb::DBImpl::OpenCompactionOutputFile (this=this@entry=0x7fabf9011400, compact=compact@entry=0x7fabf741a2b0) at db/db_impl.cc:1399
1399 db/db_impl.cc: No such file or directory.
(gdb) where
Test Plan: make check
Reviewers: MarkCallaghan, sheki
Reviewed By: MarkCallaghan
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10101
Summary:
Transaction Log Iterator did not move to the next file in the series if there was a write batch at the end of the currentFile.
The solution is if the last seq no. of the current file is < RequestedSeqNo. Assume the first seqNo. of the next file has to satisfy the request.
Also major refactoring around the code. Moved opening the logreader to a seperate function, got rid of goto.
Test Plan: added a unit test for it.
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb, emayanke
Differential Revision: https://reviews.facebook.net/D10029
Summary:
TableAndFile was a struct used earlier to delete the file as we did not have std::unique_ptr in the codebase.
With Chip introducing C++11 hotness like std::unique_ptr we can do away with the struct.
Test Plan: make all check
Reviewers: haobo, heyongqiang
Reviewed By: heyongqiang
CC: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D9975
Summary:
During recovery, last_updated_manifest number was not set if there were no records in the Write-ahead log.
Now check for the recovered manifest also and set last_updated_manifest file to the max value.
Test Plan: unit test
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9891
Summary:
If a class owns an object:
- If the object can be null => use a unique_ptr. no delete
- If the object can not be null => don't even need new, let alone delete
- for runtime sized array => use vector, no delete.
Test Plan: make check
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb, zshao, sheki, emayanke, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D9783
Summary:
RocksDB does a binary search to look at the files which might contain the requested sequence number at the call GetUpdatesSince.
There was a bug in the binary search => when the file pointed by the middle index of bsearch was empty/corrupt it needst to resize the vector and update indexes.
This now fixes that.
Test Plan: existing unit tests pass.
Reviewers: heyongqiang, dhruba
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9777
Summary:
If the vector returned by GetUpdatesSince is empty, it is still returned to the
user. This causes it throw an std::range error.
The probable file list is checked and it returns an IOError status instead of OK now.
Test Plan: added a unit test.
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9771
Summary:
Use non mmapd files for Write-Ahead log.
Earlier use of MMaped files. made the log iterator read ahead and miss records.
Now the reader and writer will point to the same physical location.
There is no perf regression :
./db_bench --benchmarks=fillseq --db=/dev/shm/mmap_test --num=$(million 20) --use_existing_db=0 --threads=2
with This diff :
fillseq : 10.756 micros/op 185281 ops/sec; 20.5 MB/s
without this dif :
fillseq : 11.085 micros/op 179676 ops/sec; 19.9 MB/s
Test Plan: unit test included
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9741
Summary:
Earlier Statistics object was a raw pointer. This meant the user had to clear up
the Statistics object after creating the database. In most use cases the database is created in a function and the statistics pointer is out of scope. Hence the statistics object would never be deleted.
Now Using a shared_ptr to manage this.
Want this in before the next release.
Test Plan: make all check.
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9735
Summary: rocksdb uses a single global lock to protect in memory metadata. We should minimize the mutex protected code section to increase the effective parallelism of the program. See https://our.intern.facebook.com/intern/tasks/?t=2218928
Test Plan:
make check
db_bench
Reviewers: dhruba, heyongqiang
CC: zshao, leveldb
Differential Revision: https://reviews.facebook.net/D9705
Summary:
The unit test fails as our solution does not work with MMap'd files.
Disable the failing unit test. Put it back with the next diff which should fix the problem.
Test Plan: db_test
Reviewers: heyongqiang
CC: dhruba
Differential Revision: https://reviews.facebook.net/D9645
Summary:
* Add a method to check if the log reader is at EOF.
* If we know a record has been flushed force the log_reader to believe it is not at EOF, using a new method UnMarkEof().
This does not work with MMpaed files.
Test Plan: added a unit test.
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9567
Summary:
The events that trigger compaction:
* opening the database
* Get -> only if seek compaction is not disabled and other checks are true
* MakeRoomForWrite -> when memtable is full
* BackgroundCall ->
If the background thread is about to do a compaction run, it schedules
a new background task to trigger a possible compaction. This will cause
additional background threads to find and process other compactions that
can run concurrently.
Test Plan: ran db_bench with overwrite and readonly alternatively.
Reviewers: sheki, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9579
Summary:
This patch allows an application to specify whether to use bufferedio,
reads-via-mmaps and writes-via-mmaps per database. Earlier, there
was a global static variable that was used to configure this functionality.
The default setting remains the same (and is backward compatible):
1. use bufferedio
2. do not use mmaps for reads
3. use mmap for writes
4. use readaheads for reads needed for compaction
I also added a parameter to db_bench to be able to explicitly specify
whether to do readaheads for compactions or not.
Test Plan: make check
Reviewers: sheki, heyongqiang, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9429
Summary: Some comparisons left in log_test.cc and db_test.cc complained by make
Test Plan: make
Reviewers: dhruba, sheki
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D9537
Summary: Makefile had options to ignore sign-comparisons and unused-parameters, which should be there. Also fixed the specific errors in the code-base
Test Plan: make
Reviewers: chip, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9531
Summary:
Add --benchmarks=levelstats option to report per-level stats (#files, #bytes)
Change readwhilewriting test to report response time for writes but exclude
them from the stats merged by all threads.
Prevent "NaN" in stats output by preventing division by 0.
Remove "o" file I committed by mistake.
Task ID: #
Blame Rev:
Test Plan:
make check
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D9513
