Summary:
Right now, users will encounter unexpected bahavior if they use key or value larger than 4GB. We should explicitly fail the queriers.
Closes https://github.com/facebook/rocksdb/pull/3484
Differential Revision: D6953895
Pulled By: siying
fbshipit-source-id: b60491e1af064fc5d52971956661f6c18ceac24f
Summary:
This patch takes advantage of memtable being able to detect duplicate <key,seq> and returning TryAgain to handle duplicate keys in WritePrepared Txns. Through WriteBatchWithIndex's index it detects existence of at least a duplicate key in the write batch. If duplicate key was reported, it then pays the cost of counting the number of sub-patches by iterating over the write batch and pass it to DBImpl::Write. DB will make use of the provided batch_count to assign proper sequence numbers before sending them to the WAL. When later inserting the batch to the memtable, it increases the seq each time memtbale reports a duplicate (a sub-patch in our counting) and tries again.
Closes https://github.com/facebook/rocksdb/pull/3455
Differential Revision: D6873699
Pulled By: maysamyabandeh
fbshipit-source-id: db8487526c3a5dc1ddda0ea49f0f979b26ae648d
Summary:
Add tests to ensure that WritePrepared and WriteCommitted policies are cross compatible when the db WAL is empty. This is important when the admin want to switch between the policies. In such case, before the switch the admin needs to empty the WAL by i) committing/rollbacking all the pending transactions, ii) FlushMemTables
Closes https://github.com/facebook/rocksdb/pull/3118
Differential Revision: D6227247
Pulled By: maysamyabandeh
fbshipit-source-id: bcde3d92c1e89cda3b9cfa69f6a20af5d8993db7
Summary:
GetCommitTimeWriteBatch is currently used to store some state as part of commit in 2PC. In MyRocks it is specifically used to store some data that would be needed only during recovery. So it is not need to be stored in memtable right after each commit.
This patch enables an optimization to write the GetCommitTimeWriteBatch only to the WAL. The batch will be written to memtable during recovery when the WAL is replayed. To cover the case when WAL is deleted after memtable flush, the batch is also buffered and written to memtable right before each memtable flush.
Closes https://github.com/facebook/rocksdb/pull/3071
Differential Revision: D6148023
Pulled By: maysamyabandeh
fbshipit-source-id: 2d09bae5565abe2017c0327421010d5c0d55eaa7
Summary:
Add kTypeBlobIndex value type, which will be used by blob db only, to insert a (key, blob_offset) KV pair. The purpose is to
1. Make it possible to open existing rocksdb instance as blob db. Existing value will be of kTypeIndex type, while value inserted by blob db will be of kTypeBlobIndex.
2. Make rocksdb able to detect if the db contains value written by blob db, if so return error.
3. Make it possible to have blob db optionally store value in SST file (with kTypeValue type) or as a blob value (with kTypeBlobIndex type).
The root db (DBImpl) basically pretended kTypeBlobIndex are normal value on write. On Get if is_blob is provided, return whether the value read is of kTypeBlobIndex type, or return Status::NotSupported() status if is_blob is not provided. On scan allow_blob flag is pass and if the flag is true, return wether the value is of kTypeBlobIndex type via iter->IsBlob().
Changes on blob db side will be in a separate patch.
Closes https://github.com/facebook/rocksdb/pull/2886
Differential Revision: D5838431
Pulled By: yiwu-arbug
fbshipit-source-id: 3c5306c62bc13bb11abc03422ec5cbcea1203cca
Summary:
By default the seq number in DB is increased once per written key. WritePrepared txns requires the seq to be increased once per the entire batch so that the seq would be used as the prepare timestamp by which the transaction is identified. Also we need to increase seq for the commit marker since it would give a unique id to the commit timestamp of transactions.
Two unit tests are added to verify our understanding of how the seq should be increased. The recovery path requires much more work and is left to another patch.
Closes https://github.com/facebook/rocksdb/pull/2885
Differential Revision: D5837843
Pulled By: maysamyabandeh
fbshipit-source-id: a08960b93d727e1cf438c254d0c2636fb133cc1c
Summary:
Blob db rely on base db returning sequence number through write batch after DB::Write(). However after recent changes to the write path, DB::Writ()e no longer return sequence number in some cases. Fixing it by have WriteBatchInternal::InsertInto() always encode sequence number into write batch.
Stacking on #2375.
Closes https://github.com/facebook/rocksdb/pull/2385
Differential Revision: D5148358
Pulled By: yiwu-arbug
fbshipit-source-id: 8bda0aa07b9334ed03ed381548b39d167dc20c33
Summary:
PipelineWriteImpl is an alternative approach to WriteImpl. In WriteImpl, only one thread is allow to write at the same time. This thread will do both WAL and memtable writes for all write threads in the write group. Pending writers wait in queue until the current writer finishes. In the pipeline write approach, two queue is maintained: one WAL writer queue and one memtable writer queue. All writers (regardless of whether they need to write WAL) will still need to first join the WAL writer queue, and after the house keeping work and WAL writing, they will need to join memtable writer queue if needed. The benefit of this approach is that
1. Writers without memtable writes (e.g. the prepare phase of two phase commit) can exit write thread once WAL write is finish. They don't need to wait for memtable writes in case of group commit.
2. Pending writers only need to wait for previous WAL writer finish to be able to join the write thread, instead of wait also for previous memtable writes.
Merging #2056 and #2058 into this PR.
Closes https://github.com/facebook/rocksdb/pull/2286
Differential Revision: D5054606
Pulled By: yiwu-arbug
fbshipit-source-id: ee5b11efd19d3e39d6b7210937b11cefdd4d1c8d
Summary:
Extend TransactionOptions to include max_write_batch_size which determines the maximum size of the writebatch representation. If memory limit is exceeded, the operation will abort with subcode kMemoryLimit.
Closes https://github.com/facebook/rocksdb/pull/2124
Differential Revision: D4861842
Pulled By: lth
fbshipit-source-id: 46fd172ea67cc90bbba829bf0d70cfab2261c161
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.
```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628
RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```
Test Plan: Two unit tests added.
Reviewers: sdong, yiwu, IslamAbdelRahman
Reviewed By: yiwu
Subscribers: hermanlee4, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64599
Summary:
Add API to WriteBatch to store range deletions in its buffer
which are later added to memtable. In the WriteBatch buffer, a range
deletion is encoded as "<optype><CF ID (optional)><begin key><end key>".
With this diff, the range tombstones are stored inline with the data in
the memtable. It's useful for now because the test cases rely on the
data being accessible via memtable. My next step is to store range
tombstones in a separate area in the memtable.
Test Plan: unit tests
Reviewers: IslamAbdelRahman, sdong, wanning
Reviewed By: wanning
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61401
Summary:
Stale log files can be deleted out of order. This can happen for various reasons. One of the reason is that no data is ever inserted to a column family and we have an optimization to update its log number, but not all the old log files are cleaned up (the case shown in the unit tests added). It can also happen when we simply delete multiple log files out of order.
This causes data corruption because we simply increase seqID after processing the next row and we may end up with writing data with smaller seqID than what is already flushed to memtables.
In DB recovery, for the oldest files we are replaying, if there it contains no data for any column family, we ignore the sequence IDs in the file.
Test Plan: Add two unit tests that fail without the fix.
Reviewers: IslamAbdelRahman, igor, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, yoshinorim, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60891
Summary: filter_deltes is not a frequently used feature. Remove it.
Test Plan: Run all test suites.
Reviewers: igor, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59427
Summary:
Consider the following WAL with 4 batch entries prefixed with their sequence at time of memtable insert.
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(a)]
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(b)]
[4: COMMIT(a)]
[7: COMMIT(b)]
The first two batches do not consume any sequence numbers so are both prefixed with seq=1.
For 2pc commit, memtable insertion takes place before COMMIT batch is written to WAL.
We can see that sequence number consumption takes place between WAL entries giving us the seemingly sparse sequence prefix for WAL entries.
This is a valid WAL.
Because with 2PC markers one WriteBatch points to another batch containing its inserts a writebatch can consume more or less sequence numbers than the number of sequence consuming entries that it contains.
We can see that, given the entries in the WAL, 6 sequence ids were consumed. Yet on recovery the maximum sequence consumed would be 7 + 3 (the number of sequence numbers consumed by COMMIT(b))
So, now upon recovery we must track the actual consumption of sequence numbers.
In the provided scenario there will be no sequence gaps, but it is possible to produce a sequence gap. This should not be a problem though. correct?
Test Plan: provided test.
Reviewers: sdong
Subscribers: andrewkr, leveldb, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D57645
Summary:
This diff is built on top of WriteBatch modification: https://reviews.facebook.net/D54093 and adds the required functionality to rocksdb core necessary for rocksdb to support 2PC.
modfication of DBImpl::WriteImpl()
- added two arguments *uint64_t log_used = nullptr, uint64_t log_ref = 0;
- *log_used is an output argument which will return the log number which the incoming batch was inserted into, 0 if no WAL insert took place.
- log_ref is a supplied log_number which all memtables inserted into will reference after the batch insert takes place. This number will reside in 'FindMinPrepLogReferencedByMemTable()' until all Memtables insertinto have flushed.
- Recovery/writepath is now aware of prepared batches and commit and rollback markers.
Test Plan: There is currently no test on this diff. All testing of this functionality takes place in the Transaction layer/diff but I will add some testing.
Reviewers: IslamAbdelRahman, sdong
Subscribers: leveldb, santoshb, andrewkr, vasilep, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D56919
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: andrewkr, vasilep, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54093
record.size() should not be less than 12.
This "magic number" seems to be the WriteBatch header (8 byte sequence
and 4 byte count). Replaced all the places where "12" was used
by WriteBatchInternal::kHeader.
Summary:
copy from task 8196669:
1) Optimistic transactions do not support batching writes from different threads.
2) Pessimistic transactions do not support batching writes if an expiration time is set.
In these 2 cases, we currently do not do any write batching in DBImpl::WriteImpl() because there is a WriteCallback that could decide at the last minute to abort the write. But we could support batching write operations with callbacks if we make sure to process the callbacks correctly.
To do this, we would first need to modify write_thread.cc to stop preventing writes with callbacks from being batched together. Then we would need to change DBImpl::WriteImpl() to call all WriteCallback's in a batch, only write the batches that succeed, and correctly set the state of each batch's WriteThread::Writer.
Test Plan: Added test WriteWithCallbackTest to write_callback_test.cc which creates multiple client threads and verifies that writes are batched and executed properly.
Reviewers: hermanlee4, anthony, ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52863
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
Summary:
There's no need for WriteImpl to flatten the write batch group
into a single WriteBatch if the WAL is disabled. This diff moves the
flattening into the WAL step, and skips flattening entirely if it isn't
needed. It's good for about 5% speedup on a multi-threaded workload
with no WAL.
This diff also adds clarifying comments about the chance for partial
failure of WriteBatchInternal::InsertInto, and always sets bg_error_ if
the memtable state diverges from the logged state or if a WriteBatch
succeeds only partially.
Benchmark for speedup:
db_bench -benchmarks=fillrandom -threads=16 -batch_size=1 -memtablerep=skip_list -value_size=0 --num=200000 -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000
Test Plan: asserts + make check
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50583
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary:
Support RollbackToSavePoint() in WriteBatch and WriteBatchWithIndex. Support for partial transaction rollback is needed for MyRocks.
An alternate implementation of Transaction::RollbackToSavePoint() exists in D40869. However, the other implementation is messier because it is implemented outside of WriteBatch. This implementation is much cleaner and also exposes a potentially useful feature to WriteBatch.
Test Plan: Added unit tests
Reviewers: IslamAbdelRahman, kradhakrishnan, maykov, yoshinorim, hermanlee4, spetrunia, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42723
Summary:
The very last reference happens in DBImpl::GetOptions()
I built with both DBImpl::GetOptions() and ColumnFamilyData::options() commented out
Test Plan: make all check
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29073
Summary:
When memtable is full it calls the registered callback. That callback then registers column family as needing the flush. Every write checks if there are some column families that need to be flushed. This completely eliminates the need for MakeRoomForWrite() function and simplifies our Write code-path.
There is some complexity with the concurrency when the column family is dropped. I made it a bit less complex by dropping the column family from the write thread in https://reviews.facebook.net/D22965. Let me know if you want to discuss this.
Test Plan: make check works. I'll also run db_stress with creating and dropping column families for a while.
Reviewers: yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23067
Summary:
Before this diff, whenever we Write to non-existing column family, Write() would fail.
This diff adds an option to not fail a Write() when WriteBatch points to non-existing column family. MongoDB said this would be useful for them, since they might have a transaction updating an index that was dropped by another thread. This way, they don't have to worry about checking if all indexes are alive on every write. They don't care if they lose writes to dropped index.
Test Plan: added a small unit test
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22143
Summary:
This is a rough sketch of our new document API. Would like to get some thoughts and comments about the high-level architecture and API.
I didn't optimize for performance at all. Leaving some low-hanging fruit so that we can be happy when we fix them! :)
Currently, bunch of features are not supported at all. Indexes can be only specified when creating database. There is no query planner whatsoever. This will all be added in due time.
Test Plan: Added a simple unit test
Reviewers: haobo, yhchiang, dhruba, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18747
Summary:
This will enable people using TTL DB to do so with multiple column families. They can also specify different TTLs for each one.
TODO: Implement CreateColumnFamily() in TTL world.
Test Plan: Added a very simple sanity test.
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: haobo
CC: leveldb, alberts
Differential Revision: https://reviews.facebook.net/D17859
Summary:
I'm cleaning up some code preparing for the big diff review tomorrow. This is the first part of the cleanup.
Changes are mostly cosmetic. The goal is to decrease amount of code difference between columnfamilies and master branch.
This diff also fixes race condition when dropping column family.
Test Plan: Ran db_stress with variety of parameters
Reviewers: dhruba, haobo
Differential Revision: https://reviews.facebook.net/D16833
Summary:
This diff fixes two bugs:
* Increase sequence number even if WriteBatch fails. This is important because WriteBatches in WAL logs have implictly increasing sequence number, even if one update in a write batch fails. This caused some writes to get lost in my CF stress testing
* Tolerate 'invalid column family' errors on recovery. When a column family is dropped, processing WAL logs can have some WriteBatches that still refer to the dropped column family. In recovery environment, we want to ignore those errors. In client's Write() code path, however, we want to return the failure to the client if he's trying to add data to invalid column family.
Test Plan: db_stress's verification works now
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16533
Summary:
The change to the public behavior:
* When opening a DB or creating new column family client gets a ColumnFamilyHandle.
* As long as column family handle is alive, client can do whatever he wants with it, even drop it
* Dropped column family can still be read from (using the column family handle)
* Added a new call CloseColumnFamily(). Client has to close all column families that he has opened before deleting the DB
* As soon as column family is closed, any calls to DB using that column family handle will fail (also any outstanding calls)
Internally:
* Ref-counting ColumnFamilyData
* New thread-safety for ColumnFamilySet
* Dropped column families are now completely dropped and their memory cleaned-up
Test Plan: added some tests to column_family_test
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16101
Summary:
WriteBatch can have multiple column families in one batch. Every column family has different options. So we have to add a way for write batch to get options for an arbitrary column family.
This required a bit more acrobatics since lots of interfaces had to be changed.
Test Plan: make check
Reviewers: dhruba, haobo, sdong, kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15957
Summary: This one is big. It adds ability to write to and read from different column families (see the unit test). It also supports recovery of different column families from log, which was the hardest part to reason about. We need to make sure to never delete the log file which has unflushed data from any column family. To support that, I added another concept, which is versions_->MinLogNumber()
Test Plan: Added a unit test in column_family_test
Reviewers: dhruba, haobo, sdong, kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15537
Summary:
Currently for each put, a fresh memory is allocated, and a new entry is added to the memtable with a new sequence number irrespective of whether the key already exists in the memtable. This diff is an attempt to update the value inplace for existing keys. It currently handles a very simple case:
1. Key already exists in the current memtable. Does not inplace update values in immutable memtable or snapshot
2. Latest value type is a 'put' ie kTypeValue
3. New value size is less than existing value, to avoid reallocating memory
TODO: For a put of an existing key, deallocate memory take by values, for other value types till a kTypeValue is found, ie. remove kTypeMerge.
TODO: Update the transaction log, to allow consistent reload of the memtable.
Test Plan: Added a unit test verifying the inplace update. But some other unit tests broken due to invalid sequence number checks. WIll fix them next.
Reviewers: xinyaohu, sumeet, haobo, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12423
Automatic commit by arc
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary: Replace include/leveldb with include/rocksdb.
Test Plan:
make clean; make check
make clean; make release
Differential Revision: https://reviews.facebook.net/D12489
Summary:
Introduced KeyMayExist checking during writebatch-delete and removed from Outer Delete API because it uses writebatch-delete.
Added code to skip getting Table from disk if not already present in table_cache.
Some renaming of variables.
Introduced KeyMayExistImpl which allows checking since specified sequence number in GetImpl useful to check partially written writebatch.
Changed KeyMayExist to not be pure virtual and provided a default implementation.
Expanded unit-tests in db_test to check appropriately.
Ran db_stress for 1 hour with ./db_stress --max_key=100000 --ops_per_thread=10000000 --delpercent=50 --filter_deletes=1 --statistics=1.
Test Plan: db_stress;make check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D11745
Summary:
How it works:
* GetUpdatesSince takes a SequenceNumber.
* A LogFile with the first SequenceNumber nearest and lesser than the requested Sequence Number is found.
* Seek in the logFile till the requested SeqNumber is found.
* Return an iterator which contains logic to return record's one by one.
Test Plan:
* Test case included to check the good code path.
* Will update with more test-cases.
* Feedback required on test-cases.
Reviewers: dhruba, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7119
- Replace raw slice comparison with a call to user comparator.
Added test for custom comparators.
- Fix end of namespace comments.
- Fixed bug in picking inputs for a level-0 compaction.
When finding overlapping files, the covered range may expand
as files are added to the input set. We now correctly expand
the range when this happens instead of continuing to use the
old range. For example, suppose L0 contains files with the
following ranges:
F1: a .. d
F2: c .. g
F3: f .. j
and the initial compaction target is F3. We used to search
for range f..j which yielded {F2,F3}. However we now expand
the range as soon as another file is added. In this case,
when F2 is added, we expand the range to c..j and restart the
search. That picks up file F1 as well.
This change fixes a bug related to deleted keys showing up
incorrectly after a compaction as described in Issue 44.
(Sync with upstream @25072954)
Slight tweak to the no-overlap optimization: only push to
level 2 to reduce the amount of wasted space when the same
small key range is being repeatedly overwritten.
Fix for Issue 18: Avoid failure on Windows by avoiding
deletion of lock file until the end of DestroyDB().
Fix for Issue 19: Disregard sequence numbers when checking for
overlap in sstable ranges. This fixes issue 19: when writing
the same key over and over again, we would generate a sequence
of sstables that were never merged together since their sequence
numbers were disjoint.
Don't ignore map/unmap error checks.
Miscellaneous fixes for small problems Sanjay found while diagnosing
issue/9 and issue/16 (corruption_testr failures).
- log::Reader reports the record type when it finds an unexpected type.
- log::Reader no longer reports an error when it encounters an expected
zero record regardless of the setting of the "checksum" flag.
- Added a missing forward declaration.
- Documented a side-effects of larger write buffer sizes
(longer recovery time).
git-svn-id: https://leveldb.googlecode.com/svn/trunk@37 62dab493-f737-651d-591e-8d6aee1b9529
