dolysis/rocksdb
3
0
Fork 0
mirror of https://github.com/facebook/rocksdb.git synced 2024-11-30 04:41:49 +00:00
Code Issues Packages Projects Releases Wiki Activity
12341 commits 196 branches 277 tags 394 MiB
Commit graph

892 commits

Author SHA1 Message Date
Andrew Kryczka d8e47620d7 Speedup based on pending compaction bytes relative to data size (#12130) 
Summary:
RocksDB self throttles per-DB compaction parallelism until it detects compaction pressure. The pressure detection based on pending compaction bytes was only comparing against the slowdown trigger (`soft_pending_compaction_bytes_limit`). Online services tend to set that extremely high to avoid stalling at all costs. Perhaps they should have set it to zero, but we never documented that zero disables stalling so I have been telling everyone to increase it for years.

This PR adds pressure detection based on pending compaction bytes relative to the size of bottommost data. The size of bottommost data should be fairly stable and proportional to the logical data size

Pull Request resolved: https://github.com/facebook/rocksdb/pull/12130

Reviewed By: hx235

Differential Revision: D52000746

Pulled By: ajkr

fbshipit-source-id: 7e1fd170901a74c2d4a69266285e3edf6e7631c7
 2023-12-13 10:37:27 -08:00
Levi Tamasi 0ebe1614cb Eliminate some code duplication in MergeHelper (#12121) 
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12121

The patch eliminates some code duplication by unifying the two sets of `MergeHelper::TimedFullMerge` overloads using variadic templates. It also brings the order of parameters into sync when it comes to the various `TimedFullMerge*` methods.

Reviewed By: jaykorean

Differential Revision: D51862483

fbshipit-source-id: e3f832a6ff89ba34591451655cf11025d0a0d018
 2023-12-05 14:07:42 -08:00
Yu Zhang ba8fa0f546 internal_repo_rocksdb (4372117296613874540) (#12117) 
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/12117

Reviewed By: ajkr

Differential Revision: D51745846

Pulled By: jowlyzhang

fbshipit-source-id: 51c806a484b3b43d174b06d2cfe9499191d09914
 2023-12-04 11:17:32 -08:00
Yu Zhang 509947ce2c Quarantine files in a limbo state after a manifest error (#12030) 
Summary:
Part of the procedures to handle manifest IO error is to disable file deletion in case some files in limbo state get deleted prematurely. This is not ideal because: 1) not all the VersionEdits whose commit encounter such an error contain updates for files, disabling file deletion sometimes are not necessary. 2) `EnableFileDeletion` has a force mode that could make other threads accidentally disrupt this procedure in recovery.  3) Disabling file deletion as a whole is also not as efficient as more precisely tracking impacted files from being prematurely deleted.  This PR replaces this mechanism with tracking such files and quarantine them from being deleted in `ErrorHandler`.

These are the types of files being actively tracked in quarantine in this PR:
1) new table files and blob files from a background job
2) old manifest file whose immediately following new manifest file's CURRENT file creation gets into unclear state. Current handling is not sufficient to make sure the old manifest file is kept in case it's needed.

Note that WAL logs are not part of the quarantine because `min_log_number_to_keep` is a safe mechanism and it's only updated after successful manifest commits so it can prevent this premature deletion issue from happening.

We track these files' file numbers because they share the same file number space.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/12030

Test Plan: Modified existing unit tests

Reviewed By: ajkr

Differential Revision: D51036774

Pulled By: jowlyzhang

fbshipit-source-id: 84ef26271fbbc888ef70da5c40fe843bd7038716
 2023-11-11 08:11:11 -08:00
Jay Huh 2dab137182 Mark more files for periodic compaction during offpeak (#12031) 
Summary:
- The struct previously named `OffpeakTimeInfo` has been renamed to `OffpeakTimeOption` to indicate that it's a user-configurable option. Additionally, a new struct, `OffpeakTimeInfo`, has been introduced, which includes two fields: `is_now_offpeak` and `seconds_till_next_offpeak_start`. This change prevents the need to parse the `daily_offpeak_time_utc` string twice.
- It's worth noting that we may consider adding more fields to the `OffpeakTimeInfo` struct, such as `elapsed_seconds` and `total_seconds`, as needed for further optimization.
- Within `VersionStorageInfo::ComputeFilesMarkedForPeriodicCompaction()`, we've adjusted the `allowed_time_limit` to include files that are expected to expire by the next offpeak start.
- We might explore further optimizations, such as evenly distributing files to mark during offpeak hours, if the initial approach results in marking too many files simultaneously during the first scoring in offpeak hours. The primary objective of this PR is to prevent periodic compactions during non-offpeak hours when offpeak hours are configured. We'll start with this straightforward solution and assess whether it suffices for now.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/12031

Test Plan:
Unit Tests added
- `DBCompactionTest::LevelPeriodicCompactionOffpeak` for Leveled
- `DBTestUniversalCompaction2::PeriodicCompaction` for Universal

Reviewed By: cbi42

Differential Revision: D50900292

Pulled By: jaykorean

fbshipit-source-id: 267e7d3332d45a5d9881796786c8650fa0a3b43d
 2023-11-06 11:43:59 -08:00
Yu Zhang 4b013dcbed Remove VersionEdit's friends pattern (#12024) 
Summary:
Almost each of VersionEdit private member has its own getter and setter. Current code access them with a combination of directly accessing private members and via getter and setters. There is no obvious benefits to have this pattern except potential performance gains. I tried this simple benchmark for removing the friends pattern completely, and there is no obvious regression. So I think it would good to remove VersionEdit's friends completely.

```TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num_column_families=10 -num=50000000```

With change:
fillseq      :       2.994 micros/op 333980 ops/sec 149.710 seconds 50000000 operations;   36.9 MB/s
fillseq      :       3.033 micros/op 329656 ops/sec 151.673 seconds 50000000 operations;   36.5 MB/s
fillseq      :       2.991 micros/op 334369 ops/sec 149.535 seconds 50000000 operations;   37.0 MB/s
Without change:
fillseq      :       3.015 micros/op 331715 ops/sec 150.732 seconds 50000000 operations;   36.7 MB/s
fillseq      :       3.044 micros/op 328553 ops/sec 152.182 seconds 50000000 operations;   36.3 MB/s
fillseq      :       3.091 micros/op 323520 ops/sec 154.550 seconds 50000000 operations;   35.8 MB/s

Pull Request resolved: https://github.com/facebook/rocksdb/pull/12024

Reviewed By: pdillinger

Differential Revision: D50806066

Pulled By: jowlyzhang

fbshipit-source-id: 35d287ce638a38c30f243f85992e615b4c90eb27
 2023-11-01 12:04:11 -07:00
Jay Huh e230e4d248 Make OffpeakTimeInfo available in VersionSet (#12018) 
Summary:
As mentioned in  https://github.com/facebook/rocksdb/issues/11893, we are going to use the offpeak time information to pre-process TTL-based compactions. To do so, we need to access `daily_offpeak_time_utc` in `VersionStorageInfo::ComputeCompactionScore()` where we pick the files to compact. This PR is to make the offpeak time information available at the time of compaction-scoring. We are not changing any compaction scoring logic just yet. Will follow up in a separate PR.

There were two ways to achieve what we want.
1.  Make `MutableDBOptions` available in `ColumnFamilyData` and `ComputeCompactionScore()` take `MutableDBOptions` along with `ImmutableOptions` and `MutableCFOptions`.
2. Make `daily_offpeak_time_utc` and `IsNowOffpeak()` available in `VersionStorageInfo`.

We chose the latter as it involves smaller changes.

This change includes the following
- Introduction of `OffpeakTimeInfo` and `IsNowOffpeak()` has been moved from `MutableDBOptions`
- `OffpeakTimeInfo` added to `VersionSet` and it can be set during construction and by `ChangeOffpeakTimeInfo()`
- During `SetDBOptions()`, if offpeak time info needs to change, it calls `MaybeScheduleFlushOrCompaction()` to re-compute compaction scores and process compactions as needed

Pull Request resolved: https://github.com/facebook/rocksdb/pull/12018

Test Plan:
- `DBOptionsTest::OffpeakTimes` changed to include checks for `MaybeScheduleFlushOrCompaction()` calls and `VersionSet`'s OffpeakTimeInfo value change during `SetDBOptions()`.
- `VersionSetTest::OffpeakTimeInfoTest` added to test `ChangeOffpeakTimeInfo()`. `IsNowOffpeak()` tests moved from `DBOptionsTest::OffpeakTimes`

Reviewed By: pdillinger

Differential Revision: D50723881

Pulled By: jaykorean

fbshipit-source-id: 3cff0291936f3729c0e9c7750834b9378fb435f6
 2023-10-27 15:56:48 -07:00
Peter Dillinger 4155087746 Use manifest to persist pre-allocated seqnos (#11995) 
Summary:
... and other fixes for crash test after https://github.com/facebook/rocksdb/issues/11922.
* When pre-allocating sequence numbers for establishing a time history, record that last sequence number in the manifest so that it is (most likely) restored on recovery even if no user writes were made or were recovered (e.g. no WAL).
* When pre-allocating sequence numbers for establishing a time history, only do this for actually new DBs.
* Remove the feature that ensures non-zero sequence number on creating the first column family with preserve/preclude option after initial DB::Open. Until fixed in a way compatible with the crash test, this creates a gap where some data written with active preserve/preclude option won't have a known associated time.

Together, these ensure we don't upset the crash test by manipulating sequence numbers after initial DB creation (esp when re-opening with different options). (The crash test expects that the seqno after re-open corresponds to a known point in time from previous crash test operation, matching an expected DB state.)

Follow-up work:
* Re-fill the gap to ensure all data written under preserve/preclude settings have a known time estimate.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11995

Test Plan:
Added to unit test SeqnoTimeTablePropTest.PrePopulateInDB

Verified fixes two crash test scenarios:
## 1st reproducer
First apply
```
 diff --git a/db_stress_tool/expected_state.cc b/db_stress_tool/expected_state.cc
index b483e154c..ef63b8d6c 100644
 --- a/db_stress_tool/expected_state.cc
+++ b/db_stress_tool/expected_state.cc
@@ -333,6 +333,7 @@ Status FileExpectedStateManager::SaveAtAndAfter(DB* db) {
     s = NewFileTraceWriter(Env::Default(), soptions, trace_file_path,
                            &trace_writer);
   }
+  if (getenv("CRASH")) assert(false);
   if (s.ok()) {
     TraceOptions trace_opts;
     trace_opts.filter |= kTraceFilterGet;
```

Then
```
mkdir -p /dev/shm/rocksdb_test/rocksdb_crashtest_expected
mkdir -p /dev/shm/rocksdb_test/rocksdb_crashtest_whitebox
rm -rf /dev/shm/rocksdb_test/rocksdb_crashtest_*/*
CRASH=1 ./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=1 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --preserve_internal_time_seconds=36000
./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=0 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --preserve_internal_time_seconds=0
```

Without the fix you get
```
...
DB path: [/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox]
(Re-)verified 34 unique IDs
Error restoring historical expected values: Corruption: DB is older than any restorable expected state
```

## 2nd reproducer
First apply
```
 diff --git a/db_stress_tool/db_stress_test_base.cc b/db_stress_tool/db_stress_test_base.cc
index 62ddead7b..f2654980f 100644
 --- a/db_stress_tool/db_stress_test_base.cc
+++ b/db_stress_tool/db_stress_test_base.cc
@@ -1126,6 +1126,7 @@ void StressTest::OperateDb(ThreadState* thread) {
         // OPERATION write
         TestPut(thread, write_opts, read_opts, rand_column_families, rand_keys,
                 value);
+        if (getenv("CRASH")) assert(false);
       } else if (prob_op < del_bound) {
         assert(write_bound <= prob_op);
         // OPERATION delete
```

Then
```
rm -rf /dev/shm/rocksdb_test/rocksdb_crashtest_*/*
CRASH=1 ./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=1 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --disable_wal=1 --reopen=0 --preserve_internal_time_seconds=0
./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=0 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --disable_wal=1 --reopen=0 --preserve_internal_time_seconds=3600
```

Without the fix you get
```
DB path: [/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox]
(Re-)verified 34 unique IDs
db_stress: db_stress_tool/expected_state.cc:380: virtual rocksdb::{anonymous}::ExpectedStateTraceRecordHandler::~
ExpectedStateTraceRecordHandler(): Assertion `IsDone()' failed.
```

Reviewed By: jowlyzhang

Differential Revision: D50533346

Pulled By: pdillinger

fbshipit-source-id: 1056be45c5b9e537c8c601b28c4b27431a782477
 2023-10-23 09:20:59 -07:00
Changyu Bi 648fe25bc0 Always clear files marked for compaction in ComputeCompactionScore() (#11946) 
Summary:
We were seeing the following stress test failures:
```LevelCompactionBuilder::PickFileToCompact(const rocksdb::autovector<std::pair<int, rocksdb::FileMetaData*> >&, bool): Assertion `!level_file.second->being_compacted' failed```

This can happen when we are picking a file to be compacted from some files marked for compaction, but that file is already being_compacted. We prevent this by always calling `ComputeCompactionScore()` after we pick a compaction and mark some files as being_compacted. However, if SetOptions() is called to disable marking certain files to be compacted, say `enable_blob_garbage_collection`, we currently just skip the relevant logic in `ComputeCompactionScore()` without clearing the existing files already marked for compaction. This PR fixes this issue by already clearing these files.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11946

Test Plan: existing tests.

Reviewed By: akankshamahajan15

Differential Revision: D50232608

Pulled By: cbi42

fbshipit-source-id: 11e4fb5e9d48b0f946ad33b18f7c005f0161f496
 2023-10-12 15:26:10 -07:00
Peter Dillinger 1d5bddbc58 Bootstrap, pre-populate seqno_to_time_mapping (#11922) 
Summary:
This change has two primary goals (follow-up to https://github.com/facebook/rocksdb/issues/11917, https://github.com/facebook/rocksdb/issues/11920):
* Ensure the DB seqno_to_time_mapping has entries that allow us to put a good time lower bound on any writes that happen after setting up preserve/preclude options (either in a new DB, new CF, SetOptions, etc.) and haven't yet aged out of that time window. This allows us to remove a bunch of work-arounds in tests.
* For new DBs using preserve/preclude options, automatically reserve some sequence numbers and pre-map them to cover the time span back to the preserve/preclude cut-off time. In the future, this will allow us to import data from another DB by key, value, and write time by assigning an appropriate seqno in this DB for that write time.

Note that the pre-population (historical mappings) does not happen if the original options at DB Open time do not have preserve/preclude, so it is recommended to create initial column families at that time with create_missing_column_families, to take advantage of this (future) feature. (Adding these historical mappings after DB Open would risk non-monotonic seqno_to_time_mapping, which is dubious if not dangerous.)

Recommended follow-up:
* Solve existing race conditions (not memory safety) where parallel operations like CreateColumnFamily or SetDBOptions could leave the wrong setting in effect.
* Make SeqnoToTimeMapping more gracefully handle a possible case in which too many mappings are added for the time range of concern. It seems like there could be cases where data is massively excluded from the cold tier because of entries falling off the front of the mapping list (causing GetProximalSeqnoBeforeTime() to return 0). (More investigation needed.)

No release note for the minor bug fix because this is still an experimental feature with limited usage.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11922

Test Plan: tests added / updated

Reviewed By: jowlyzhang

Differential Revision: D49956563

Pulled By: pdillinger

fbshipit-source-id: 92beb918c3a298fae9ca8e509717b1067caa1519
 2023-10-06 08:21:21 -07:00
Levi Tamasi f42e70bf56 Integrate FullMergeV3 into the query and compaction paths (#11858) 
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11858

The patch builds on https://github.com/facebook/rocksdb/pull/11807 and integrates the `FullMergeV3` API into the read and compaction code paths by updating and extending the logic in `MergeHelper`.

In particular, when it comes to merge inputs, the existing `TimedFullMergeWithEntity` is folded into `TimedFullMerge`, since wide-column base values are now handled the same way as plain base values (or no base values for that matter), e.g. they are passed directly to the `MergeOperator`. On the other hand, there is some new differentiation on the output side. Namely, there are now two sets of `TimedFullMerge` variants: one set for contexts where the complete merge result and its value type are needed (used by iterators and compactions), and another set where the merge result is needed in a form determined by the client (used by the point lookup APIs, where e.g. for `Get` we have to extract the value of the default column of any wide-column results).

Implementation-wise, the two sets of overloads use different visitors to process the `std::variant` produced by `FullMergeV3`. This has the benefit of eliminating some repeated code e.g. in the point lookup paths, since `TimedFullMerge` now populates the application's result object (`PinnableSlice`/`string` or `PinnableWideColumns`) directly. Moreover, within each set of variants, there is a separate overload for the no base value/plain base value/wide-column base value cases, which eliminates some repeated branching w/r/t to the type of the base value if any.

Reviewed By: jaykorean

Differential Revision: D49352562

fbshipit-source-id: c2fb9853dba3fbbc6918665bde4195c4ea150a0c
 2023-09-19 17:27:04 -07:00
leipeng 68ce5d84f6 Add new Iterator API Refresh(const snapshot*) (#10594) 
Summary:
This PR resolves https://github.com/facebook/rocksdb/issues/10487 & https://github.com/facebook/rocksdb/issues/10536, user code needs to call Refresh() periodically.

The main code change is to support range deletions. A range tombstone iterator uses a sequence number as upper bound to decide which range tombstones are effective. During Iterator refresh, this sequence number upper bound needs to be updated for all range tombstone iterators under DBIter and LevelIterator. LevelIterator may create new table iterators and range tombstone iterator during scanning, so it needs to be aware of iterator refresh. The code path that propagates this change is `db_iter_->set_sequence(read_seq)  -> MergingIterator::SetRangeDelReadSeqno() -> TruncatedRangeDelIterator::SetRangeDelReadSeqno() and LevelIterator::SetRangeDelReadSeqno()`.

This change also fixes an issue where range tombstone iterators created by LevelIterator may access ReadOptions::snapshot, even though we do not explicitly require users to keep a snapshot alive after creating an Iterator.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10594

Test Plan:
* New unit tests.
* Add Iterator::Refresh(snapshot) to stress test. Note that this change only adds tests for refreshing to the same snapshot since this is the main target use case.

TODO in a following PR:
* Stress test Iterator::Refresh() to different snapshots or no snapshot.

Reviewed By: ajkr

Differential Revision: D48456896

Pulled By: cbi42

fbshipit-source-id: 2e642c04e91235cc9542ef4cd37b3c20823bd779
 2023-09-15 10:44:43 -07:00
Levi Tamasi 8fc78a3a9e Add helper methods WideColumnsHelper::{Has,Get}DefaultColumn (#11813) 
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11813

The patch adds a couple of helper methods `WideColumnsHelper::{Has,Get}DefaultColumn` to eliminate some code duplication.

Reviewed By: jaykorean

Differential Revision: D49166682

fbshipit-source-id: f229ca5b94599f7445a0112b10f8317292505c82
 2023-09-11 16:32:32 -07:00
Changyu Bi d1ff401472 Delay bottommost level single file compactions (#11701) 
Summary:
For leveled compaction, RocksDB has a special kind of compaction with reason "kBottommmostFiles" that compacts bottommost level files to clear data held by snapshots (more detail in https://github.com/facebook/rocksdb/issues/3009). Such compactions can happen soon after a relevant snapshot is released. For some use cases, a bottommost file may contain only a small amount of keys that can be cleared, so compacting such a file has a high write amp. In addition, these bottommost files may be compacted in compactions with reason other than "kBottommmostFiles" if we wait for some time (so that enough data is ingested to trigger such a compaction). This PR introduces an option `bottommost_file_compaction_delay` to specify the delay of these bottommost level single file compactions.

* The main change is in `VersionStorageInfo::ComputeBottommostFilesMarkedForCompaction()` where we only add a file to `bottommost_files_marked_for_compaction_` if it oldest_snapshot is larger than its non-zero largest_seqno **and** the file is old enough. Note that if a file is not old enough but its largest_seqno is less than oldest_snapshot, we exclude it from the calculation of `bottommost_files_mark_threshold_`. This makes the change simpler, but such a file's eligibility for compaction will only be checked the next time `ComputeBottommostFilesMarkedForCompaction()` is called. This happens when a new Version is created (compaction, flush, SetOptions()...), a new enough snapshot is released (`VersionStorageInfo::UpdateOldestSnapshot()`) or when a compaction is picked and compaction score has to be re-calculated.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11701

Test Plan:
* Add two unit tests to test when bottommost_file_compaction_delay > 0.
* Ran crash test with the new option.

Reviewed By: jaykorean, ajkr

Differential Revision: D48331564

Pulled By: cbi42

fbshipit-source-id: c584f3dc5f6354fce3ed65f4c6366dc450b15ba8
 2023-08-16 17:45:44 -07:00
tabokie 6d1effaf01 exclude uninitialized files when estimating compression ratio (#11664) 
Summary:
Exclude files with uninitialized table properties when estimating compression ratio.

Cherry-picking downstream PR: https://github.com/tikv/rocksdb/pull/335

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11664

Reviewed By: cbi42

Differential Revision: D48002518

Pulled By: ajkr

fbshipit-source-id: 931fac8a06b4ed7b7b605cf79903302f1b8babfd
 2023-08-07 12:35:42 -07:00
Yu Zhang c24ef26ca7 Support switching on / off UDT together with in-Memtable-only feature (#11623) 
Summary:
Add support to allow enabling / disabling user-defined timestamps feature for an existing column family in combination with the in-Memtable only feature.

To do this, this PR includes:
1) Log the `persist_user_defined_timestamps` option per column family in Manifest to facilitate detecting an attempt to enable / disable UDT. This entry is enforced to be logged in the same VersionEdit as the user comparator name entry.

2) User-defined timestamps related options are validated when re-opening a column family, including user comparator name and the `persist_user_defined_timestamps` flag. These type of settings and settings change are considered valid:
     a) no user comparator change and no effective `persist_user_defined_timestamp` flag change.
     b) switch user comparator to enable UDT provided the immediately effective `persist_user_defined_timestamps` flag
         is false.
     c) switch user comparator to disable UDT provided that the before-change `persist_user_defined_timestamps` is
         already false.
3) when an attempt to enable UDT is detected, we mark all its existing SST files as "having no UDT" by marking its `FileMetaData.user_defined_timestamps_persisted` flag to false and handle their file boundaries `FileMetaData.smallest`, `FileMetaData.largest` by padding a min timestamp.

4) while enabling / disabling UDT feature, timestamp size inconsistency in existing WAL logs are handled to make it compatible with the running user comparator.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11623

Test Plan:
```
make all check
./db_with_timestamp_basic_test --gtest-filter="*EnableDisableUDT*"
./db_wal_test --gtest_filter="*EnableDisableUDT*"
```

Reviewed By: ltamasi

Differential Revision: D47636862

Pulled By: jowlyzhang

fbshipit-source-id: dcd19f67292da3c3cc9584c09ad00331c9ab9322
 2023-07-26 20:16:32 -07:00
huangmengbin 98d0f6ec08 fix: VersionSet::DumpManifest (#11605) 
Summary:
Fixes https://github.com/facebook/rocksdb/issues/11604

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11605

Reviewed By: jowlyzhang

Differential Revision: D47459254

Pulled By: ajkr

fbshipit-source-id: 4420e443fbf4bd01ddaa2b47285fc4445bf36246
 2023-07-19 10:44:10 -07:00
weedge 1a7c741977 fix: std::optional value() build error on older macOS SDK (#11574) 
Summary:
`PORTABLE=1 USE_SSE=1 USE_PCLMUL=1 WITH_JEMALLOC_FLAG=1 JEMALLOC=1 make static_lib`  on MacOS

clang --version:

Apple clang version 12.0.0 (clang-1200.0.32.29)
Target: x86_64-apple-darwin22.4.0
Thread model: posix
InstalledDir: /Library/Developer/CommandLineTools/usr/bin

compile err like this:

util/udt_util.cc:39:39: error: 'value' is unavailable: introduced in macOS 10.14
  if (running_ts_sz != recorded_ts_sz.value()) {
                                      ^
/Library/Developer/CommandLineTools/usr/bin/../include/c++/v1/optional:944:33: note: 'value' has been explicitly marked
      unavailable here
    constexpr value_type const& value() const&
                                ^
util/udt_util.cc:217:62: error: 'value' is unavailable: introduced in macOS 10.14
      *new_key = StripTimestampFromUserKey(key, record_ts_sz.value());
                                                             ^
/Library/Developer/CommandLineTools/usr/bin/../include/c++/v1/optional:953:27: note: 'value' has been explicitly marked
      unavailable here
    constexpr value_type& value() &
                          ^
2 errors generated.
make: *** [util/udt_util.o] Error 1

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11574

Reviewed By: ajkr

Differential Revision: D47269519

Pulled By: cbi42

fbshipit-source-id: da49d90cdf00a0af519f91c0cf7d257401eb395f
 2023-07-10 14:21:34 -07:00
Yu Zhang f74526341d Handle file boundaries when timestamps should not be persisted (#11578) 
Summary:
Handle file boundaries `FileMetaData.smallest`, `FileMetaData.largest` for when `persist_user_defined_timestamps` is false:
    1) on the manifest write path, the original user-defined timestamps in file boundaries are stripped. This stripping is done during `VersionEdit::Encode` to limit the effect of the stripping to only the persisted version of the file boundaries.
    2) on the manifest read path during DB open, a a min timestamp is padded to the file boundaries. Ideally, this padding should happen during `VersionEdit::Decode` so that all in memory file boundaries have a compatible user key format as the running user comparator. However, because the user-defined timestamp size information is not available at that time. This change is added to `VersionEditHandler::OnNonCfOperation`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11578

Test Plan:
```
make all check
./version_edit_test --gtest_filter="*EncodeDecodeNewFile4HandleFileBoundary*".
./db_with_timestamp_basic_test --gtest_filter="*HandleFileBoundariesTest*"
```

Reviewed By: pdillinger

Differential Revision: D47309399

Pulled By: jowlyzhang

fbshipit-source-id: 21b4d54d2089a62826b31d779094a39cb2bbbd51
 2023-07-10 11:03:25 -07:00
akankshamahajan fbd2f563bb Add an interface to provide support for underlying FS to pass their own buffer during reads (#11324) 
Summary:
1. Public API change: Replace `use_async_io`  API in file_system with `SupportedOps` API which is used by underlying FileSystem to indicate to upper layers whether the FileSystem supports different operations introduced in `enum FSSupportedOps `. Right now operations are `async_io` and whether FS will provide its own buffer during reads or not. The api is changed to extend it to various FileSystem operations in one API rather than creating a separate API for each operation.

2. Provide support for underlying FS to pass their own buffer during Reads (async and sync read) instead of using RocksDB provided `scratch` (buffer) in `FSReadRequest`. Currently only MultiRead supports it and later will be extended to other reads as well (point lookup, scan etc). More details in how to enable in file_system.h

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11324

Test Plan: Tested locally

Reviewed By: anand1976

Differential Revision: D44465322

Pulled By: akankshamahajan15

fbshipit-source-id: 9ec9e08f839b5cc815e75d5dade6cd549998d0ec
 2023-06-23 11:48:49 -07:00
Yu Zhang 7521478b43 Record the persist_user_defined_timestamps flag in manifest (#11515) 
Summary:
Start to record the value of the flag `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` in the Manifest and table properties for a SST file when it is created. And use the recorded flag when creating a table reader for the SST file. This flag's default value is true, it is only explicitly recorded if it's false.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11515

Test Plan:
```
make all check
./version_edit_test
```

Reviewed By: ltamasi

Differential Revision: D46920386

Pulled By: jowlyzhang

fbshipit-source-id: 075c20363d3d2cc1368422ecc805617ed135cc26
 2023-06-21 21:49:01 -07:00
Changyu Bi bc04ec85db Make option level_compaction_dynamic_level_bytes true by default (#11525) 
Summary:
after https://github.com/facebook/rocksdb/issues/11321 and https://github.com/facebook/rocksdb/issues/11340 (both included in RocksDB v8.2), migration from `level_compaction_dynamic_level_bytes=false` to `level_compaction_dynamic_level_bytes=true` is automatic by RocksDB and requires no manual compaction from user. Making the option true by default as it has several advantages: 1. better space amplification guarantee (a more stable LSM shape). 2. compaction is more adaptive to write traffic. 3. automatic draining of unneeded levels. Wiki is updated with more detail: https://github.com/facebook/rocksdb/wiki/Leveled-Compaction#option-level_compaction_dynamic_level_bytes-and-levels-target-size.

The PR mostly contains fixes for unit tests as they assumed `level_compaction_dynamic_level_bytes=false`. Most notable change is commit f742be330c and b1928e42b3 which override the default option in DBTestBase to still set `level_compaction_dynamic_level_bytes=false` by default. This helps to reduce the change needed for unit tests. I think this default option override in unit tests is okay since the behavior of `level_compaction_dynamic_level_bytes=true` is tested by explicitly setting this option. Also, `level_compaction_dynamic_level_bytes=false` may be more desired in unit tests as it makes it easier to create a desired LSM shape.

Comment for option `level_compaction_dynamic_level_bytes` is updated to reflect this change and change made in https://github.com/facebook/rocksdb/issues/10057.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11525

Test Plan: `make -j32 J=32 check` several times to try to catch flaky tests due to this option change.

Reviewed By: ajkr

Differential Revision: D46654256

Pulled By: cbi42

fbshipit-source-id: 6b5827dae124f6f1fdc8cca2ac6f6fcd878830e1
 2023-06-15 21:12:39 -07:00
Changyu Bi 15e8a843d9 Do not include last level in compaction when allow_ingest_behind=true (#11489) 
Summary:
when a DB is configured with `allow_ingest_behind = true`, the last level should be reserved for ingested files and these files should not be included in any compaction. Currently, a major compaction can compact these files to smaller levels. This can cause future files to be rejected for ingest behind (see `ExternalSstFileIngestionJob::CheckLevelForIngestedBehindFile()`). This PR fixes the issue such that files in the last level is not included in any compaction.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11489

Test Plan: * Updated unit test `ExternalSSTFileTest.IngestBehind` to test that last level is not included in manual and auto-compaction.

Reviewed By: ajkr

Differential Revision: D46455711

Pulled By: cbi42

fbshipit-source-id: 5e2142c2a709ef932ad797897795021c06c4ac8c
 2023-06-14 11:28:56 -07:00
Andrew Kryczka cac3240cbf add property "rocksdb.obsolete-sst-files-size" (#11533) 
Summary:
See "unreleased_history/new_features/obsolete_sst_files_size.md" for description

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11533

Test Plan: updated unit test

Reviewed By: jowlyzhang

Differential Revision: D46703152

Pulled By: ajkr

fbshipit-source-id: ea5e31cd6293eccc154130c13e66b5271f57c102
 2023-06-13 15:52:45 -07:00
Hui Xiao dcc6fc99f9 Fix StopWatch bug; Remove setting record_read_stats (#11474) 
Summary:
**Context/Summary:**
- StopWatch enable stats even when `StatsLevel::kExceptTimers` is set. It's a harmless bug though since `reportTimeToHistogram()` will not report it anyway according to https://github.com/facebook/rocksdb/blob/main/include/rocksdb/statistics.h#L705
-  https://github.com/facebook/rocksdb/pull/11288 should have removed logics of setting `record_read_stats = !for_compaction` as we don't differentiate `RandomAccessFileReader`'s stats behavior based on compaction or not (instead we now report stats of different IO activities including compaction to different stats). Fixing this should report more compaction related file read micros that aren't reported previously due to `for_compaction==true`

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11474

Test Plan:
- DB bench pre vs post fix with small max_open_files

Setup command
`./db_ bench  -db=/dev/shm/testdb/ -statistics=true -benchmarks=fillseq -key_size=32 -value_size=512 -num=5000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=true -compression_type=none -bloom_bits=3`

Run command
`./db_bench --open_files=1 -use_existing_db=true -db=/dev/shm/testdb2/ -statistics=true -benchmarks=compactall -key_size=32 -value_size=512 -num=5000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=true -compression_type=none -bloom_bits=3`

Pre-fix
```
rocksdb.sst.read.micros P50 : 2.056175 P95 : 4.647739 P99 : 8.948475 P100 : 25.000000 COUNT : 4451 SUM : 12827
rocksdb.file.read.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.read.compaction.micros P50 : 2.057397 P95 : 4.625253 P99 : 8.749474 P100 : 25.000000 COUNT : 4382 SUM : 12608
rocksdb.file.read.db.open.micros P50 : 1.985294 P95 : 9.100000 P99 : 13.000000 P100 : 13.000000 COUNT : 69 SUM : 219
```

Post-fix (with a higher `rocksdb.file.read.compaction.micros` count)
```
rocksdb.sst.read.micros P50 : 1.858968 P95 : 3.653086 P99 : 5.968000 P100 : 21.000000 COUNT : 3548 SUM : 9119
rocksdb.file.read.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.read.compaction.micros P50 : 1.857027 P95 : 3.627614 P99 : 5.738621 P100 : 21.000000 COUNT : 3479 SUM : 8904
rocksdb.file.read.db.open.micros P50 : 2.000000 P95 : 6.733333 P99 : 11.000000 P100 : 11.000000 COUNT : 69 SUM : 215
```
- CI

Reviewed By: ajkr

Differential Revision: D46137221

Pulled By: hx235

fbshipit-source-id: e5b4ee7001af26f2ee0377bc6334f43b2a527388
 2023-05-25 10:16:58 -07:00
mayue.fight 8d8eb0e77e Support Clip DB to KeyRange (#11379) 
Summary:
This PR is part of the request https://github.com/facebook/rocksdb/issues/11317.
(Another part is https://github.com/facebook/rocksdb/pull/11378)

ClipDB() will clip the entries in the CF according to the range [begin_key, end_key). All the entries outside this range will be completely deleted (including tombstones).
 This feature is mainly used to ensure that there is no overlapping Key when calling CreateColumnFamilyWithImports() to import multiple CFs.

When Calling ClipDB [begin, end), there are the following steps

1.  Quickly and directly delete files without overlap
 DeleteFilesInRanges(nullptr, begin) + DeleteFilesInRanges(end, nullptr)
2. Delete the Key outside the range
Delete[smallest_key, begin) + Delete[end, largest_key]
3. Delete the tombstone through Manul Compact
CompactRange(option, nullptr, nullptr)

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11379

Reviewed By: ajkr

Differential Revision: D45840358

Pulled By: cbi42

fbshipit-source-id: 54152e8a45fd8ede137f99787eb252f0b51440a4
 2023-05-18 13:25:01 -07:00
Changyu Bi 8827cd0618 Support compacting files to different temperatures in FIFO compaction (#11428) 
Summary:
- Add a new option `CompactionOptionsFIFO::file_temperature_age_thresholds` that allows user to specify age thresholds for compacting files to different temperatures. File temperature can be used to store files in different storage media. The new options allows specifying multiple temperature-age pairs. The option uses struct for a temperature-age pair to use the existing parsing functionality to make the option dynamically settable.
- Deprecate the old option `age_for_warm` that was added for a similar purpose.
- Compaction score calculation logic is updated to check if a file needs to be compacted to change its temperature.
- Some refactoring is done in `FIFOCompactionPicker::PickTemperatureChangeCompaction`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11428

Test Plan: adapted unit tests that were for `age_for_warm` to this new option.

Reviewed By: ajkr

Differential Revision: D45611412

Pulled By: cbi42

fbshipit-source-id: 2dc384841f61cc04abb9681e31aa2de0f0b06106
 2023-05-11 16:40:59 -07:00
Hui Xiao 8f763bdeab Record and use the tail size to prefetch table tail (#11406) 
Summary:
**Context:**
We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g,  small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug.  Therefore we decide to record the exact tail size and use it directly  to prefetch tail of the SST instead of relying heuristics.

**Summary:**
- Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()`
   - For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more.
- Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406

Test Plan:
1. New UT
2. db bench
Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison.
```
 diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc
index bd5669f0f..791484c1f 100644
 --- a/table/block_based/block_based_table_reader.cc
+++ b/table/block_based/block_based_table_reader.cc
@@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail(
                            &tail_prefetch_size);

   // Try file system prefetch
-  if (!file->use_direct_io() && !force_direct_prefetch) {
+  if (false && !file->use_direct_io() && !force_direct_prefetch) {
     if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority)
              .IsNotSupported()) {
       prefetch_buffer->reset(new FilePrefetchBuffer(
 diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc
index ea40f5fa0..39a0ac385 100644
 --- a/tools/db_bench_tool.cc
+++ b/tools/db_bench_tool.cc
@@ -4191,6 +4191,8 @@ class Benchmark {
           std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options));
     } else {
       BlockBasedTableOptions block_based_options;
+      block_based_options.metadata_cache_options.partition_pinning =
+      PinningTier::kAll;
       block_based_options.checksum =
           static_cast<ChecksumType>(FLAGS_checksum_type);
       if (FLAGS_use_hash_search) {
```
Create DB
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
ReadRandom
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
(a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 3395
rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614
```

(b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 14257
rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540
```

As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR

3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR.

Reviewed By: pdillinger

Differential Revision: D45413346

Pulled By: hx235

fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064
 2023-05-08 13:14:28 -07:00
Changyu Bi 62fc15f009 Block per key-value checksum (#11287) 
Summary:
add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are
1. checksum construction and verification in block.cc/h
2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h)
3. unit tests/crash test updates

Tests:
* Added unit tests
* Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576`

Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled.

Performance:
Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory.
For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates):

```
SETUP
make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench
./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none

BENCHMARK
./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE

The readrandom ops/sec looks like the following:
Block cache size:  2GB        1.2GB * 0.9    1.2GB * 0.8     1.2GB * 0.5   8MB
Main              240805     223604         198176           161653       139040
PR prot_bytes=0   238691     226693         200127           161082       141153
PR prot_bytes=1   214983     193199         178532           137013       108211
prot_bytes=1 vs    -10%        -15%          -10.8%          -15%        -23%
prot_bytes=0
```

The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287

Reviewed By: ajkr

Differential Revision: D43970708

Pulled By: cbi42

fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940
 2023-04-25 12:08:23 -07:00
Hui Xiao 151242ce46 Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) 
Summary:
**Context:**
The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them.

**Summary**
- Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros`
   - Fixed the default histogram in `RandomAccessFileReader`
- New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader`
- Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288

Test Plan:
- **Stress test**
- **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.**  (without blob)
     - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads.
```
./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10)
```
```
// BlockBasedTable
rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805
rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116
rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689

// PlainTable
Does not apply
```
- **Db bench 2: performance**

**Read**

SETUP: db with 900 files
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655  -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none
```run till convergence
```
./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3
```
Pre-change
`readrandom [AVG 60 runs] : 21568 (± 248) ops/sec`
Post-change (no regression, -0.3%)
`readrandom [AVG 60 runs] : 21486 (± 236) ops/sec`

**Compaction/Flush**run till convergence
```
./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655  -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none

rocksdb.sst.read.micros  COUNT : 33820
rocksdb.sst.read.flush.micros COUNT : 1800
rocksdb.sst.read.compaction.micros COUNT : 32020
```
Pre-change
`fillseq [AVG 46 runs] : 1391 (± 214) ops/sec;    0.7 (± 0.1) MB/sec`

Post-change (no regression, ~-0.4%)
`fillseq [AVG 46 runs] : 1385 (± 216) ops/sec;    0.7 (± 0.1) MB/sec`

Reviewed By: ajkr

Differential Revision: D44007011

Pulled By: hx235

fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
 2023-04-21 09:07:18 -07:00
Changyu Bi 64cead919f Initialize lowest_unnecessary_level_ in VersionStorageInfo constructor (#11359) 
Summary:
valgrind complains "Conditional jump or move depends on uninitialised value(s)". A sample error message:

```
[ RUN      ] DBCompactionTest.DrainUnnecessaryLevelsAfterDBBecomesSmall
==3353864== Conditional jump or move depends on uninitialised value(s)
==3353864==    at 0x8647B4: rocksdb::VersionStorageInfo::ComputeCompactionScore(rocksdb::ImmutableOptions const&, rocksdb::MutableCFOptions const&) (version_set.cc:3414)
==3353864==    by 0x86B340: rocksdb::VersionSet::AppendVersion(rocksdb::ColumnFamilyData*, rocksdb::Version*) (version_set.cc:4946)
==3353864==    by 0x876B88: rocksdb::VersionSet::CreateColumnFamily(rocksdb::ColumnFamilyOptions const&, rocksdb::VersionEdit const*) (version_set.cc:6876)
==3353864==    by 0xBA66FE: rocksdb::VersionEditHandler::CreateCfAndInit(rocksdb::ColumnFamilyOptions const&, rocksdb::VersionEdit const&) (version_edit_handler.cc:483)
==3353864==    by 0xBA4A81: rocksdb::VersionEditHandler::Initialize() (version_edit_handler.cc:187)
==3353864==    by 0xBA3927: rocksdb::VersionEditHandlerBase::Iterate(rocksdb::log::Reader&, rocksdb::Status*) (version_edit_handler.cc:31)
==3353864==    by 0x870173: rocksdb::VersionSet::Recover(std::vector<rocksdb::ColumnFamilyDescriptor, std::allocator<rocksdb::ColumnFamilyDescriptor> > const&, bool, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >*, bool) (version_set.cc:5729)
==3353864==    by 0x7538FA: rocksdb::DBImpl::Recover(std::vector<rocksdb::ColumnFamilyDescriptor, std::allocator<rocksdb::ColumnFamilyDescriptor> > const&, bool, bool, bool, unsigned long*, rocksdb::DBImpl::RecoveryContext*) (db_impl_open.cc:522)
==3353864==    by 0x75BA0F: rocksdb::DBImpl::Open(rocksdb::DBOptions const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::vector<rocksdb::ColumnFamilyDescriptor, std::allocator<rocksdb::ColumnFamilyDescriptor> > const&, std::vector<rocksdb::ColumnFamilyHandle*, std::allocator<rocksdb::ColumnFamilyHandle*> >*, rocksdb::DB**, bool, bool) (db_impl_open.cc:1928)
==3353864==    by 0x75A735: rocksdb::DB::Open(rocksdb::DBOptions const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::vector<rocksdb::ColumnFamilyDescriptor, std::allocator<rocksdb::ColumnFamilyDescriptor> > const&, std::vector<rocksdb::ColumnFamilyHandle*, std::allocator<rocksdb::ColumnFamilyHandle*> >*, rocksdb::DB**) (db_impl_open.cc:1743)
==3353864==    by 0x75A510: rocksdb::DB::Open(rocksdb::Options const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, rocksdb::DB**) (db_impl_open.cc:1720)
==3353864==    by 0x5925FD: rocksdb::DBTestBase::TryReopen(rocksdb::Options const&) (db_test_util.cc:710)
==3353864==  Uninitialised value was created by a heap allocation
==3353864==    at 0x4842F0F: operator new(unsigned long) (vg_replace_malloc.c:422)
==3353864==    by 0x876AF4: rocksdb::VersionSet::CreateColumnFamily(rocksdb::ColumnFamilyOptions const&, rocksdb::VersionEdit const*) (version_set.cc:6870)
==3353864==    by 0xBA66FE: rocksdb::VersionEditHandler::CreateCfAndInit(rocksdb::ColumnFamilyOptions const&, rocksdb::VersionEdit const&) (version_edit_handler.cc:483)
==3353864==    by 0xBA4A81: rocksdb::VersionEditHandler::Initialize() (version_edit_handler.cc:187)
==3353864==    by 0xBA3927: rocksdb::VersionEditHandlerBase::Iterate(rocksdb::log::Reader&, rocksdb::Status*) (version_edit_handler.cc:31)
==3353864==    by 0x870173: rocksdb::VersionSet::Recover(std::vector<rocksdb::ColumnFamilyDescriptor, std::allocator<rocksdb::ColumnFamilyDescriptor> > const&, bool, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >*, bool) (version_set.cc:5729)
==3353864==    by 0x7538FA: rocksdb::DBImpl::Recover(std::vector<rocksdb::ColumnFamilyDescriptor, std::allocator<rocksdb::ColumnFamilyDescriptor> > const&, bool, bool, bool, unsigned long*, rocksdb::DBImpl::RecoveryContext*) (db_impl_open.cc:522)
==3353864==    by 0x75BA0F: rocksdb::DBImpl::Open(rocksdb::DBOptions const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::vector<rocksdb::ColumnFamilyDescriptor, std::allocator<rocksdb::ColumnFamilyDescriptor> > const&, std::vector<rocksdb::ColumnFamilyHandle*, std::allocator<rocksdb::ColumnFamilyHandle*> >*, rocksdb::DB**, bool, bool) (db_impl_open.cc:1928)
==3353864==    by 0x75A735: rocksdb::DB::Open(rocksdb::DBOptions const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::vector<rocksdb::ColumnFamilyDescriptor, std::allocator<rocksdb::ColumnFamilyDescriptor> > const&, std::vector<rocksdb::ColumnFamilyHandle*, std::allocator<rocksdb::ColumnFamilyHandle*> >*, rocksdb::DB**) (db_impl_open.cc:1743)
==3353864==    by 0x75A510: rocksdb::DB::Open(rocksdb::Options const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, rocksdb::DB**) (db_impl_open.cc:1720)
==3353864==    by 0x5925FD: rocksdb::DBTestBase::TryReopen(rocksdb::Options const&) (db_test_util.cc:710)
==3353864==    by 0x591F73: rocksdb::DBTestBase::Reopen(rocksdb::Options const&) (db_test_util.cc:662)
```

This is likely about `lowest_unnecessary_level_` even though it would be initialized in `CalculateBaseBytes()` before being used in `ComputeCompactionScore()`. Initialize it also in VersionStorageInfo constructor to prevent valgrind from  complaining.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11359

Test Plan: - ran a test with valgrind which gave the error message above before this PR: `valgrind --track-origins=yes ./db_compaction_test  --gtest_filter="*DrainUnnecessaryLevelsAfterDBBecomesSmall*"`

Reviewed By: hx235

Differential Revision: D44799112

Pulled By: cbi42

fbshipit-source-id: 557208a66f04a2163b418b2a651bdb7e777c4511
 2023-04-07 15:17:18 -07:00
Changyu Bi b3c43a5b99 Drain unnecessary levels when level_compaction_dynamic_level_bytes=true (#11340) 
Summary:
When a user migrates to level compaction + `level_compaction_dynamic_level_bytes=true`, or when a DB shrinks, there can be unnecessary levels in the DB. Before this PR, this is no way to remove these levels except a manual compaction. These extra unnecessary levels make it harder to guarantee max_bytes_for_level_multiplier and can cause extra space amp. This PR boosts compaction score for these levels to allow RocksDB to automatically drain these levels. Together with https://github.com/facebook/rocksdb/issues/11321, this makes migration to `level_compaction_dynamic_level_bytes=true` automatic without needing user to do a one time full manual compaction. Credit: this PR is modified from https://github.com/facebook/rocksdb/issues/3921.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11340

Test Plan:
- New unit tests
- `python3 tools/db_crashtest.py whitebox --simple` which randomly sets level_compaction_dynamic_level_bytes in each run.

Reviewed By: ajkr

Differential Revision: D44563884

Pulled By: cbi42

fbshipit-source-id: e20d3620bd73dff22be18c5a91a07f340740bcc8
 2023-04-06 11:20:43 -07:00
Changyu Bi 601320164b Trivially move files down when opening db with level_compaction_dynamic_l… (#11321) 
Summary:
…evel_bytes

 During DB open, if a column family uses level compaction with level_compaction_dynamic_level_bytes=true, trivially move its files down in the LSM such that the bottommost files are in Lmax, the second from bottommost level files are in Lmax-1 and so on. This is aimed to make it easier to migrate level_compaction_dynamic_level_bytes from false to true.  Before this change, a full manual compaction is suggested for such migration. After this change, user can just restart DB to turn on this option. db_crashtest.py is updated to randomly choose value for level_compaction_dynamic_level_bytes.

Note that there may still be too many unnecessary levels if a user is migrating from universal compaction or level compaction with a smaller level multiplier. A full manual compaction may still be needed in that case before some PR that automatically drain unnecessary levels like https://github.com/facebook/rocksdb/issues/3921 lands. Eventually we may want to change the default value of option level_compaction_dynamic_level_bytes to true.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11321

Test Plan:
1. Added unit tests.
2. Crash test: ran a variation of db_crashtest.py (like 32516507e77521ae887e45091b69139e32e8efb7) that turns level_compaction_dynamic_level_bytes on and off and switches between LC and UC for the same DB.

TODO: Update `OptionChangeMigration`, either after this PR or https://github.com/facebook/rocksdb/issues/3921.

Reviewed By: ajkr

Differential Revision: D44341930

Pulled By: cbi42

fbshipit-source-id: 013de19a915c6a0502be569f07c4cc8f1c3c6be2
 2023-03-27 14:55:16 -07:00
anand76 eac6b6d0cd Ignore async_io ReadOption if FileSystem doesn't support it (#11296) 
Summary:
In PosixFileSystem, IO uring support is opt-in. If the support is not enabled by the user, then ignore the async_io ReadOption in MultiGet and iteration at the top, rather than follow the async_io codepath and transparently switch to sync IO at the FileSystem layer.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11296

Test Plan: Add new unit tests

Reviewed By: akankshamahajan15

Differential Revision: D44045776

Pulled By: anand1976

fbshipit-source-id: a0881bf763ca2fde50b84063d0068bb521edd8b9
 2023-03-17 14:57:09 -07:00
Changyu Bi 9aa3b6f9ae Support range deletion tombstones in CreateColumnFamilyWithImport (#11252) 
Summary:
CreateColumnFamilyWithImport() did not support range tombstones for two reasons:
1. it uses point keys of a input file to determine its boundary (smallest and largest internal key), which means range tombstones outside of the point key range will be effectively dropped.
2. it does not handle files with no point keys.

Also included a fix in external_sst_file_ingestion_job.cc where the blocks read in `GetIngestedFileInfo()` can be added to block cache now (issue fixed in https://github.com/facebook/rocksdb/pull/6429).

This PR adds support for exporting and importing column family with range tombstones. The main change is to add smallest internal key and largest internal key to `SstFileMetaData` that will be part of the output of `ExportColumnFamily()`. Then during `CreateColumnFamilyWithImport(...,const ExportImportFilesMetaData& metadata,...)`, file boundaries can be set from `metadata` directly. This is needed since when file boundaries are extended by range tombstones, sometimes they cannot be deduced from a file's content alone.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11252

Test Plan:
- added unit tests that fails before this change

Closes https://github.com/facebook/rocksdb/issues/11245

Reviewed By: ajkr

Differential Revision: D43577443

Pulled By: cbi42

fbshipit-source-id: 6bff78e583cc50c44854994dea0a8dd519398f2f
 2023-03-13 11:06:59 -07:00
Levi Tamasi 3c9eed688e Enable moving a string or PinnableSlice into PinnableWideColumns (#11248) 
Summary:
This makes it possible to eliminate some copies in `GetEntity` / `MultiGetEntity`,
in particular when `Merge`s or blobs are involved.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11248

Test Plan: `make check`

Reviewed By: akankshamahajan15

Differential Revision: D43544215

Pulled By: ltamasi

fbshipit-source-id: bc4c8955a24bbd8bc4ab098e72133ead757f9707
 2023-02-24 10:33:00 -08:00
Changyu Bi 229297d1b8 Refactor AddRangeDels() + consider range tombstone during compaction file cutting (#11113) 
Summary:
A second attempt after https://github.com/facebook/rocksdb/issues/10802, with bug fixes and refactoring. This PR updates compaction logic to take range tombstones into account when determining whether to cut the current compaction output file (https://github.com/facebook/rocksdb/issues/4811). Before this change, only point keys were considered, and range tombstones could cause large compactions. For example, if the current compaction outputs is a range tombstone [a, b) and 2 point keys y, z, they would be added to the same file, and may overlap with too many files in the next level and cause a large compaction in the future. This PR also includes ajkr's effort to simplify the logic to add range tombstones to compaction output files in `AddRangeDels()` ([https://github.com/facebook/rocksdb/issues/11078](https://github.com/facebook/rocksdb/pull/11078#issuecomment-1386078861)).

The main change is for `CompactionIterator` to emit range tombstone start keys to be processed by `CompactionOutputs`. A new class `CompactionMergingIterator` is introduced to replace `MergingIterator` under `CompactionIterator` to enable emitting of range tombstone start keys. Further improvement after this PR include cutting compaction output at some grandparent boundary key (instead of the next output key) when cutting within a range tombstone to reduce overlap with grandparents.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11113

Test Plan:
* added unit test in db_range_del_test
* crash test with a small key range: `python3 tools/db_crashtest.py blackbox --simple --max_key=100 --interval=600 --write_buffer_size=262144 --target_file_size_base=256 --max_bytes_for_level_base=262144 --block_size=128 --value_size_mult=33 --subcompactions=10 --use_multiget=1 --delpercent=3 --delrangepercent=2 --verify_iterator_with_expected_state_one_in=2 --num_iterations=10`

Reviewed By: ajkr

Differential Revision: D42655709

Pulled By: cbi42

fbshipit-source-id: 8367e36ef5640e8f21c14a3855d4a8d6e360a34c
 2023-02-22 12:28:18 -08:00
Andrew Kryczka 25e1365227 Merge operator failed subcode (#11231) 
Summary:
From HISTORY.md: Added a subcode of `Status::Corruption`, `Status::SubCode::kMergeOperatorFailed`, for users to identify corruption failures originating in the merge operator, as opposed to RocksDB's internally identified data corruptions.

This is a followup to https://github.com/facebook/rocksdb/issues/11092, where we gave users the ability to keep running a DB despite merge operator failing. Now that the DB keeps running despite such failures, they want to be able to distinguish such failures from real corruptions.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11231

Test Plan: updated unit test

Reviewed By: akankshamahajan15

Differential Revision: D43396607

Pulled By: ajkr

fbshipit-source-id: 17fbcc779ad724dafada8abd73efd38e1c5208b9
 2023-02-17 10:58:46 -08:00
Levi Tamasi 9794acb597 Add a new MultiGetEntity API (#11222) 
Summary:
The new `MultiGetEntity` API can be used to get a consistent view of
a batch of keys, with the results presented as wide-column entities.
Similarly to `GetEntity` and the iterator's `columns` API, if the entry
corresponding to the key is a wide-column entity to start with, it is
returned as-is, and if it is a plain key-value, it is wrapped into an entity
with a single default column.

Implementation-wise, the new API shares the logic of the batched `MultiGet`
API (via the `MultiGetCommon` methods). Both single-CF and multi-CF
`MultiGetEntity` APIs are provided, and blobs are also supported.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11222

Test Plan: `make check`

Reviewed By: akankshamahajan15

Differential Revision: D43256950

Pulled By: ltamasi

fbshipit-source-id: 47fb2cb7e2d0470e3580f43fdb2fe9e51f0e7005
 2023-02-15 09:34:17 -08:00
Hui Xiao 9b66331388 Simplify TEST_F(DBWALTest, FixSyncWalOnObseletedWalWithNewManifestCausingMissingWAL) (#11186) 
Summary:
**Context/Summary**:
Simplify `TEST_F(DBWALTest, FixSyncWalOnObseletedWalWithNewManifestCausingMissingWAL)` based on https://github.com/facebook/rocksdb/pull/11016#pullrequestreview-1205020134 and delete unused sync points.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11186

Test Plan:
- UT failed before fix in https://github.com/facebook/rocksdb/pull/10892 and passes after
- Check UT not flaky when running with https://app.circleci.com/pipelines/github/facebook/rocksdb/21985/workflows/5f6cc355-78c1-46d8-89ee-0fd679725a8a/jobs/540878

Reviewed By: ajkr

Differential Revision: D43034723

Pulled By: hx235

fbshipit-source-id: f503774987b8f3718505f99e95080a7fad28ac66
 2023-02-06 16:10:03 -08:00
Levi Tamasi a82021c3d0 Fix a bug where GetEntity would expose a blob reference (#11162) 
Summary:
The patch fixes a feature interaction bug between BlobDB and the `GetEntity` API:
without the patch, `GetEntity` would return the blob reference (wrapped into a
single-column entity) instead of the actual blob value.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11162

Test Plan: `make check`

Reviewed By: akankshamahajan15

Differential Revision: D42854092

Pulled By: ltamasi

fbshipit-source-id: f750d0ff57def107da16f545077ddce9860ff21a
 2023-01-31 09:59:25 -08:00
Yu Zhang 24ac53d81a Use user key on sst file for blob verification for Get and MultiGet (#11105) 
Summary:
Use the user key on sst file for blob verification for `Get` and `MultiGet` instead of the user key passed from caller.

Add tests for `Get` and `MultiGet` operations when user defined timestamp feature is enabled in a BlobDB.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11105

Test Plan:
make V=1 db_blob_basic_test
./db_blob_basic_test --gtest_filter="DBBlobTestWithTimestamp.*"

Reviewed By: ltamasi

Differential Revision: D42716487

Pulled By: jowlyzhang

fbshipit-source-id: 5987ecbb7e56ddf46d2467a3649369390789506a
 2023-01-30 10:21:21 -08:00
sdong 4720ba4391 Remove RocksDB LITE (#11147) 
Summary:
We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support.

Most of changes were done through following comments:

unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'`

by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147

Test Plan: See CI

Reviewed By: pdillinger

Differential Revision: D42796341

fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
 2023-01-27 13:14:19 -08:00
Andrew Kryczka b7fbcefda8 Add API to limit blast radius of merge operator failure (#11092) 
Summary:
Prior to this PR, `FullMergeV2()` can only return `false` to indicate failure, which causes any operation invoking it to fail. During a compaction, such a failure causes the compaction to fail and causes the DB to irreversibly enter read-only mode. Some users asked for a way to allow the merge operator to fail without such widespread damage.

To limit the blast radius of merge operator failures, this PR introduces the `MergeOperationOutput::op_failure_scope` API. When unpopulated (`kDefault`) or set to `kTryMerge`, the merge operator failure handling is the same as before. When set to `kMustMerge`, merge operator failure still causes failure to operations that must merge (`Get()`, iterator, `MultiGet()`, etc.). However, under `kMustMerge`, flushes/compactions can survive merge operator failures by outputting the unmerged input operands.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11092

Reviewed By: siying

Differential Revision: D42525673

Pulled By: ajkr

fbshipit-source-id: 951dc3bf190f86347dccf3381be967565cda52ee
 2023-01-20 14:40:30 -08:00
Changyu Bi f515d9d203 Revert #10802 Consider range tombstone in compaction output file cutting (#11089) 
Summary:
This reverts commit f02c708aa3 since it introduced several bugs (see https://github.com/facebook/rocksdb/issues/11078 and https://github.com/facebook/rocksdb/issues/11067 for attempts to fix them) and that I do not have a high confidence to fix all of them and ensure no further ones before the next release branch cut. There are also come existing issue found during bug fixing. We will work on it and try to merge it to the release after.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11089

Test Plan: existing CI.

Reviewed By: ajkr

Differential Revision: D42505972

Pulled By: cbi42

fbshipit-source-id: 2f66dcde6b85dc94977b317c2ce513872cfbc153
 2023-01-13 12:28:21 -08:00
Peter Dillinger 9f7801c5f1 Major Cache refactoring, CPU efficiency improvement (#10975) 
Summary:
This is several refactorings bundled into one to avoid having to incrementally re-modify uses of Cache several times. Overall, there are breaking changes to Cache class, and it becomes more of low-level interface for implementing caches, especially block cache. New internal APIs make using Cache cleaner than before, and more insulated from block cache evolution. Hopefully, this is the last really big block cache refactoring, because of rather effectively decoupling the implementations from the uses. This change also removes the EXPERIMENTAL designation on the SecondaryCache support in Cache. It seems reasonably mature at this point but still subject to change/evolution (as I warn in the API docs for Cache).

The high-level motivation for this refactoring is to minimize code duplication / compounding complexity in adding SecondaryCache support to HyperClockCache (in a later PR). Other benefits listed below.

* static_cast lines of code +29 -35 (net removed 6)
* reinterpret_cast lines of code +6 -32 (net removed 26)

## cache.h and secondary_cache.h
* Always use CacheItemHelper with entries instead of just a Deleter. There are several motivations / justifications:
  * Simpler for implementations to deal with just one Insert and one Lookup.
  * Simpler and more efficient implementation because we don't have to track which entries are using helpers and which are using deleters
  * Gets rid of hack to classify cache entries by their deleter. Instead, the CacheItemHelper includes a CacheEntryRole. This simplifies a lot of code (cache_entry_roles.h almost eliminated). Fixes https://github.com/facebook/rocksdb/issues/9428.
  * Makes it trivial to adjust SecondaryCache behavior based on kind of block (e.g. don't re-compress filter blocks).
  * It is arguably less convenient for many direct users of Cache, but direct users of Cache are now rare with introduction of typed_cache.h (below).
  * I considered and rejected an alternative approach in which we reduce customizability by assuming each secondary cache compatible value starts with a Slice referencing the uncompressed block contents (already true or mostly true), but we apparently intend to stack secondary caches. Saving an entry from a compressed secondary to a lower tier requires custom handling offered by SaveToCallback, etc.
* Make CreateCallback part of the helper and introduce CreateContext to work with it (alternative to https://github.com/facebook/rocksdb/issues/10562). This cleans up the interface while still allowing context to be provided for loading/parsing values into primary cache. This model works for async lookup in BlockBasedTable reader (reader owns a CreateContext) under the assumption that it always waits on secondary cache operations to finish. (Otherwise, the CreateContext could be destroyed while async operation depending on it continues.) This likely contributes most to the observed performance improvement because it saves an std::function backed by a heap allocation.
* Use char* for serialized data, e.g. in SaveToCallback, where void* was confusingly used. (We use `char*` for serialized byte data all over RocksDB, with many advantages over `void*`. `memcpy` etc. are legacy APIs that should not be mimicked.)
* Add a type alias Cache::ObjectPtr = void*, so that we can better indicate the intent of the void* when it is to be the object associated with a Cache entry. Related: started (but did not complete) a refactoring to move away from "value" of a cache entry toward "object" or "obj". (It is confusing to call Cache a key-value store (like DB) when it is really storing arbitrary in-memory objects, not byte strings.)
* Remove unnecessary key param from DeleterFn. This is good for efficiency in HyperClockCache, which does not directly store the cache key in memory. (Alternative to https://github.com/facebook/rocksdb/issues/10774)
* Add allocator to Cache DeleterFn. This is a kind of future-proofing change in case we get more serious about using the Cache allocator for memory tracked by the Cache. Right now, only the uncompressed block contents are allocated using the allocator, and a pointer to that allocator is saved as part of the cached object so that the deleter can use it. (See CacheAllocationPtr.) If in the future we are able to "flatten out" our Cache objects some more, it would be good not to have to track the allocator as part of each object.
* Removes legacy `ApplyToAllCacheEntries` and changes `ApplyToAllEntries` signature for Deleter->CacheItemHelper change.

## typed_cache.h
Adds various "typed" interfaces to the Cache as internal APIs, so that most uses of Cache can use simple type safe code without casting and without explicit deleters, etc. Almost all of the non-test, non-glue code uses of Cache have been migrated. (Follow-up work: CompressedSecondaryCache deserves deeper attention to migrate.) This change expands RocksDB's internal usage of metaprogramming and SFINAE (https://en.cppreference.com/w/cpp/language/sfinae).

The existing usages of Cache are divided up at a high level into these new interfaces. See updated existing uses of Cache for examples of how these are used.
* PlaceholderCacheInterface - Used for making cache reservations, with entries that have a charge but no value.
* BasicTypedCacheInterface<TValue> - Used for primary cache storage of objects of type TValue, which can be cleaned up with std::default_delete<TValue>. The role is provided by TValue::kCacheEntryRole or given in an optional template parameter.
* FullTypedCacheInterface<TValue, TCreateContext> - Used for secondary cache compatible storage of objects of type TValue. In addition to BasicTypedCacheInterface constraints, we require TValue::ContentSlice() to return persistable data. This simplifies usage for the normal case of simple secondary cache compatibility (can give you a Slice to the data already in memory). In addition to TCreateContext performing the role of Cache::CreateContext, it is also expected to provide a factory function for creating TValue.
* For each of these, there's a "Shared" version (e.g. FullTypedSharedCacheInterface) that holds a shared_ptr to the Cache, rather than assuming external ownership by holding only a raw `Cache*`.

These interfaces introduce specific handle types for each interface instantiation, so that it's easy to see what kind of object is controlled by a handle. (Ultimately, this might not be worth the extra complexity, but it seems OK so far.)

Note: I attempted to make the cache 'charge' automatically inferred from the cache object type, such as by expecting an ApproximateMemoryUsage() function, but this is not so clean because there are cases where we need to compute the charge ahead of time and don't want to re-compute it.

## block_cache.h
This header is essentially the replacement for the old block_like_traits.h. It includes various things to support block cache access with typed_cache.h for block-based table.

## block_based_table_reader.cc
Before this change, accessing the block cache here was an awkward mix of static polymorphism (template TBlocklike) and switch-case on a dynamic BlockType value. This change mostly unifies on static polymorphism, relying on minor hacks in block_cache.h to distinguish variants of Block. We still check BlockType in some places (especially for stats, which could be improved in follow-up work) but at least the BlockType is a static constant from the template parameter. (No more awkward partial redundancy between static and dynamic info.) This likely contributes to the overall performance improvement, but hasn't been tested in isolation.

The other key source of simplification here is a more unified system of creating block cache objects: for directly populating from primary cache and for promotion from secondary cache. Both use BlockCreateContext, for context and for factory functions.

## block_based_table_builder.cc, cache_dump_load_impl.cc
Before this change, warming caches was super ugly code. Both of these source files had switch statements to basically transition from the dynamic BlockType world to the static TBlocklike world. None of that mess is needed anymore as there's a new, untyped WarmInCache function that handles all the details just as promotion from SecondaryCache would. (Fixes `TODO akanksha: Dedup below code` in block_based_table_builder.cc.)

## Everything else
Mostly just updating Cache users to use new typed APIs when reasonably possible, or changed Cache APIs when not.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10975

Test Plan:
tests updated

Performance test setup similar to https://github.com/facebook/rocksdb/issues/10626 (by cache size, LRUCache when not "hyper" for HyperClockCache):

34MB 1thread base.hyper -> kops/s: 0.745 io_bytes/op: 2.52504e+06 miss_ratio: 0.140906 max_rss_mb: 76.4844
34MB 1thread new.hyper -> kops/s: 0.751 io_bytes/op: 2.5123e+06 miss_ratio: 0.140161 max_rss_mb: 79.3594
34MB 1thread base -> kops/s: 0.254 io_bytes/op: 1.36073e+07 miss_ratio: 0.918818 max_rss_mb: 45.9297
34MB 1thread new -> kops/s: 0.252 io_bytes/op: 1.36157e+07 miss_ratio: 0.918999 max_rss_mb: 44.1523
34MB 32thread base.hyper -> kops/s: 7.272 io_bytes/op: 2.88323e+06 miss_ratio: 0.162532 max_rss_mb: 516.602
34MB 32thread new.hyper -> kops/s: 7.214 io_bytes/op: 2.99046e+06 miss_ratio: 0.168818 max_rss_mb: 518.293
34MB 32thread base -> kops/s: 3.528 io_bytes/op: 1.35722e+07 miss_ratio: 0.914691 max_rss_mb: 264.926
34MB 32thread new -> kops/s: 3.604 io_bytes/op: 1.35744e+07 miss_ratio: 0.915054 max_rss_mb: 264.488
233MB 1thread base.hyper -> kops/s: 53.909 io_bytes/op: 2552.35 miss_ratio: 0.0440566 max_rss_mb: 241.984
233MB 1thread new.hyper -> kops/s: 62.792 io_bytes/op: 2549.79 miss_ratio: 0.044043 max_rss_mb: 241.922
233MB 1thread base -> kops/s: 1.197 io_bytes/op: 2.75173e+06 miss_ratio: 0.103093 max_rss_mb: 241.559
233MB 1thread new -> kops/s: 1.199 io_bytes/op: 2.73723e+06 miss_ratio: 0.10305 max_rss_mb: 240.93
233MB 32thread base.hyper -> kops/s: 1298.69 io_bytes/op: 2539.12 miss_ratio: 0.0440307 max_rss_mb: 371.418
233MB 32thread new.hyper -> kops/s: 1421.35 io_bytes/op: 2538.75 miss_ratio: 0.0440307 max_rss_mb: 347.273
233MB 32thread base -> kops/s: 9.693 io_bytes/op: 2.77304e+06 miss_ratio: 0.103745 max_rss_mb: 569.691
233MB 32thread new -> kops/s: 9.75 io_bytes/op: 2.77559e+06 miss_ratio: 0.103798 max_rss_mb: 552.82
1597MB 1thread base.hyper -> kops/s: 58.607 io_bytes/op: 1449.14 miss_ratio: 0.0249324 max_rss_mb: 1583.55
1597MB 1thread new.hyper -> kops/s: 69.6 io_bytes/op: 1434.89 miss_ratio: 0.0247167 max_rss_mb: 1584.02
1597MB 1thread base -> kops/s: 60.478 io_bytes/op: 1421.28 miss_ratio: 0.024452 max_rss_mb: 1589.45
1597MB 1thread new -> kops/s: 63.973 io_bytes/op: 1416.07 miss_ratio: 0.0243766 max_rss_mb: 1589.24
1597MB 32thread base.hyper -> kops/s: 1436.2 io_bytes/op: 1357.93 miss_ratio: 0.0235353 max_rss_mb: 1692.92
1597MB 32thread new.hyper -> kops/s: 1605.03 io_bytes/op: 1358.04 miss_ratio: 0.023538 max_rss_mb: 1702.78
1597MB 32thread base -> kops/s: 280.059 io_bytes/op: 1350.34 miss_ratio: 0.023289 max_rss_mb: 1675.36
1597MB 32thread new -> kops/s: 283.125 io_bytes/op: 1351.05 miss_ratio: 0.0232797 max_rss_mb: 1703.83

Almost uniformly improving over base revision, especially for hot paths with HyperClockCache, up to 12% higher throughput seen (1597MB, 32thread, hyper). The improvement for that is likely coming from much simplified code for providing context for secondary cache promotion (CreateCallback/CreateContext), and possibly from less branching in block_based_table_reader. And likely a small improvement from not reconstituting key for DeleterFn.

Reviewed By: anand1976

Differential Revision: D42417818

Pulled By: pdillinger

fbshipit-source-id: f86bfdd584dce27c028b151ba56818ad14f7a432
 2023-01-11 14:20:40 -08:00
Changyu Bi cc6f323705 Include estimated bytes deleted by range tombstones in compensated file size (#10734) 
Summary:
compensate file sizes in compaction picking so files with range tombstones are preferred, such that they get compacted down earlier as they tend to delete a lot of data. This PR adds a `compensated_range_deletion_size` field in FileMeta that is computed during Flush/Compaction and persisted in MANIFEST. This value is added to `compensated_file_size` which will be used for compaction picking. Currently, for a file in level L, `compensated_range_deletion_size` is set to the estimated bytes deleted by range tombstone of this file in all levels > L. This helps to reduce space amp when data in older levels are covered by range tombstones in level L.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10734

Test Plan:
- Added unit tests.
- benchmark to check if the above definition `compensated_range_deletion_size` is reducing space amp as intended, without affecting write amp too much. The experiment set up favorable for this optimization: large range tombstone issued infrequently. Command used:
```
./db_bench -benchmarks=fillrandom,waitforcompaction,stats,levelstats -use_existing_db=false -avoid_flush_during_recovery=true -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -max_bytes_for_level_base=134217728 -target_file_size_base=33554432 -writes_per_range_tombstone=500000 -range_tombstone_width=5000000 -num=50000000 -benchmark_write_rate_limit=8388608 -threads=16 -duration=1800 --max_num_range_tombstones=1000000000
```

In this experiment, each thread wrote 16 range tombstones over the duration of 30 minutes, each range tombstone has width 5M that is the 10% of the key space width. Results shows this PR generates a smaller DB size.

Compaction stats from this PR:
```
Level    Files   Size     Score Read(GB)  Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  L0      2/0   31.54 MB   0.5      0.0     0.0      0.0       8.4      8.4       0.0   1.0      0.0     63.4    135.56            110.94       544    0.249       0      0       0.0       0.0
  L4      3/0   96.55 MB   0.8     18.5     6.7     11.8      18.4      6.6       0.0   2.7     65.3     64.9    290.08            284.03       108    2.686    284M  1957K       0.0       0.0
  L5     15/0   404.41 MB   1.0     19.1     7.7     11.4      18.8      7.4       0.3   2.5     66.6     65.7    292.93            285.34       220    1.332    293M  3808K       0.0       0.0
  L6    143/0    4.12 GB   0.0     45.0     7.5     37.5      41.6      4.1       0.0   5.5     71.2     65.9    647.00            632.66       251    2.578    739M    47M       0.0       0.0
 Sum    163/0    4.64 GB   0.0     82.6    21.9     60.7      87.2     26.5       0.3  10.4     61.9     65.4   1365.58           1312.97      1123    1.216   1318M    52M       0.0       0.0
```

Compaction stats from main:
```
Level    Files   Size     Score Read(GB)  Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  L0      0/0    0.00 KB   0.0      0.0     0.0      0.0       8.4      8.4       0.0   1.0      0.0     60.5    142.12            115.89       569    0.250       0      0       0.0       0.0
  L4      3/0   85.68 MB   1.0     17.7     6.8     10.9      17.6      6.7       0.0   2.6     62.7     62.3    289.05            281.79       112    2.581    272M  2309K       0.0       0.0
  L5     11/0   293.73 MB   1.0     18.8     7.5     11.2      18.5      7.2       0.5   2.5     64.9     63.9    296.07            288.50       220    1.346    288M  4365K       0.0       0.0
  L6    130/0    3.94 GB   0.0     51.5     7.6     43.9      47.9      3.9       0.0   6.3     67.2     62.4    784.95            765.92       258    3.042    848M    51M       0.0       0.0
 Sum    144/0    4.31 GB   0.0     88.0    21.9     66.0      92.3     26.3       0.5  11.0     59.6     62.5   1512.19           1452.09      1159    1.305   1409M    58M       0.0       0.0```

Reviewed By: ajkr

Differential Revision: D39834713

Pulled By: cbi42

fbshipit-source-id: fe9341040b8704a8fbb10cad5cf5c43e962c7e6b
 2022-12-29 13:28:24 -08:00
Changyu Bi f02c708aa3 Consider range tombstone in compaction output file cutting (#10802) 
Summary:
This PR is the first step for Issue https://github.com/facebook/rocksdb/issues/4811. Currently compaction output files are cut at point keys, and the decision is made mainly in `CompactionOutputs::ShouldStopBefore()`. This makes it possible for range tombstones to cause large compactions that does not respect `max_compaction_bytes`. For example, we can have a large range tombstone that overlaps with too many files from the next level. Another example is when there is a gap between a range tombstone and another key. The first issue may be more acceptable, as a lot of data is deleted. This PR address the second issue by calling `ShouldStopBefore()` for range tombstone start keys. The main change is for `CompactionIterator` to emit range tombstone start keys to be processed by `CompactionOutputs`. A new `CompactionMergingIterator` is introduced and only used under `CompactionIterator` for this purpose. Further improvement after this PR include 1) cut compaction output at some grandparent boundary key instead of at the next point key or range tombstone start key and 2) cut compaction output file within a large range tombstone (it may be easier and reasonable to only do it for range tombstones at the end of a compaction output).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10802

Test Plan:
- added unit tests in db_range_del_test.
- stress test: `python3 tools/db_crashtest.py whitebox --[simple|enable_ts] --verify_iterator_with_expected_state_one_in=5 --delrangepercent=5 --prefixpercent=2 --writepercent=58 --readpercen=21 --duration=36000 --range_deletion_width=1000000`

Reviewed By: ajkr, jay-zhuang

Differential Revision: D40308827

Pulled By: cbi42

fbshipit-source-id: a8fd6f70a3f09d0ef7a40e006f6c964bba8c00df
 2022-12-15 09:11:54 -08:00
Hui Xiao 98d5db5c2e Sort L0 files by newly introduced epoch_num (#10922) 
Summary:
**Context:**
Sorting L0 files by `largest_seqno` has at least two inconvenience:
-  File ingestion and compaction involving ingested files can create files of overlapping seqno range with the existing files. `force_consistency_check=true` will catch such overlap seqno range even those harmless overlap.
    - For example, consider the following sequence of events ("key@n" indicates key at seqno "n")
       - insert k1@1 to memtable m1
       - ingest file s1 with k2@2, ingest file s2 with k3@3
        - insert k4@4 to m1
       - compact files s1, s2 and  result in new file s3 of seqno range [2, 3]
       - flush m1 and result in new file s4 of seqno range [1, 4]. And `force_consistency_check=true` will think s4 and s3 has file reordering corruption that might cause retuning an old value of k1
    - However such caught corruption is a false positive since s1, s2 will not have overlapped keys with k1 or whatever inserted into m1 before ingest file s1 by the requirement of file ingestion (otherwise the m1 will be flushed first before any of the file ingestion completes). Therefore there in fact isn't any file reordering corruption.
- Single delete can decrease a file's largest seqno and ordering by `largest_seqno` can introduce a wrong ordering hence file reordering corruption
    - For example, consider the following sequence of events ("key@n" indicates key at seqno "n", Credit to ajkr  for this example)
        - an existing SST s1 contains only k1@1
        - insert k1@2 to memtable m1
        - ingest file s2 with k3@3, ingest file s3 with k4@4
        - insert single delete k5@5 in m1
        - flush m1 and result in new file s4 of seqno range [2, 5]
        - compact s1, s2, s3 and result in new file s5 of seqno range [1, 4]
        - compact s4 and result in new file s6 of seqno range [2] due to single delete
    - By the last step, we have file ordering by largest seqno (">" means "newer") : s5 > s6 while s6 contains a newer version of the k1's value (i.e, k1@2) than s5, which is a real reordering corruption. While this can be caught by `force_consistency_check=true`, there isn't a good way to prevent this from happening if ordering by `largest_seqno`

Therefore, we are redesigning the sorting criteria of L0 files and avoid above inconvenience. Credit to ajkr , we now introduce `epoch_num` which describes the order of a file being flushed or ingested/imported (compaction output file will has the minimum `epoch_num` among input files'). This will avoid the above inconvenience in the following ways:
- In the first case above, there will no longer be overlap seqno range check in `force_consistency_check=true` but `epoch_number`  ordering check. This will result in file ordering s1 <  s2 <  s4 (pre-compaction) and s3 < s4 (post-compaction) which won't trigger false positive corruption. See test class `DBCompactionTestL0FilesMisorderCorruption*` for more.
- In the second case above, this will result in file ordering s1 < s2 < s3 < s4 (pre-compacting s1, s2, s3), s5 < s4 (post-compacting s1, s2, s3), s5 < s6 (post-compacting s4), which are correct file ordering without causing any corruption.

**Summary:**
- Introduce `epoch_number` stored per `ColumnFamilyData` and sort CF's L0 files by their assigned `epoch_number` instead of `largest_seqno`.
  - `epoch_number` is increased and assigned upon `VersionEdit::AddFile()` for flush (or similarly for WriteLevel0TableForRecovery) and file ingestion (except for allow_behind_true, which will always get assigned as the `kReservedEpochNumberForFileIngestedBehind`)
  - Compaction output file  is assigned with the minimum `epoch_number` among input files'
      - Refit level: reuse refitted file's epoch_number
  -  Other paths needing `epoch_number` treatment:
     - Import column families: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`
     - Repair: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`.
  -  Assigning new epoch_number to a file and adding this file to LSM tree should be atomic. This is guaranteed by us assigning epoch_number right upon `VersionEdit::AddFile()` where this version edit will be apply to LSM tree shape right after by holding the db mutex (e.g, flush, file ingestion, import column family) or  by there is only 1 ongoing edit per CF (e.g, WriteLevel0TableForRecovery, Repair).
  - Assigning the minimum input epoch number to compaction output file won't misorder L0 files (even through later `Refit(target_level=0)`). It's due to for every key "k" in the input range, a legit compaction will cover a continuous epoch number range of that key. As long as we assign the key "k" the minimum input epoch number, it won't become newer or older than the versions of this key that aren't included in this compaction hence no misorder.
- Persist `epoch_number` of each file in manifest and recover `epoch_number` on db recovery
   - Backward compatibility with old db without `epoch_number` support is guaranteed by assigning `epoch_number` to recovered files by `NewestFirstBySeqno` order. See `VersionStorageInfo::RecoverEpochNumbers()` for more
   - Forward compatibility with manifest is guaranteed by flexibility of `NewFileCustomTag`
- Replace `force_consistent_check` on L0 with `epoch_number` and remove false positive check like case 1 with `largest_seqno` above
   - Due to backward compatibility issue, we might encounter files with missing epoch number at the beginning of db recovery. We will still use old L0 sorting mechanism (`NewestFirstBySeqno`) to check/sort them till we infer their epoch number. See usages of `EpochNumberRequirement`.
- Remove fix https://github.com/facebook/rocksdb/pull/5958#issue-511150930 and their outdated tests to file reordering corruption because such fix can be replaced by this PR.
- Misc:
   - update existing tests with `epoch_number` so make check will pass
   - update https://github.com/facebook/rocksdb/pull/5958#issue-511150930 tests to verify corruption is fixed using `epoch_number` and cover universal/fifo compaction/CompactRange/CompactFile cases
   - assert db_mutex is held for a few places before calling ColumnFamilyData::NewEpochNumber()

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10922

Test Plan:
- `make check`
- New unit tests under `db/db_compaction_test.cc`, `db/db_test2.cc`, `db/version_builder_test.cc`, `db/repair_test.cc`
- Updated tests (i.e, `DBCompactionTestL0FilesMisorderCorruption*`) under https://github.com/facebook/rocksdb/pull/5958#issue-511150930
- [Ongoing] Compatibility test: manually run 36a5686ec0 (with file ingestion off for running the `.orig` binary to prevent this bug affecting upgrade/downgrade formality checking) for 1 hour on `simple black/white box`, `cf_consistency/txn/enable_ts with whitebox + test_best_efforts_recovery with blackbox`
- [Ongoing] normal db stress test
- [Ongoing] db stress test with aggressive value https://github.com/facebook/rocksdb/pull/10761

Reviewed By: ajkr

Differential Revision: D41063187

Pulled By: hx235

fbshipit-source-id: 826cb23455de7beaabe2d16c57682a82733a32a9
 2022-12-13 13:29:37 -08:00
Hui Xiao 15bb4ea084 Deflake DBWALTest.FixSyncWalOnObseletedWalWithNewManifestCausingMissingWAL (#11016) 
Summary:
**Context/Summary:**
Credit to ajkr's https://github.com/facebook/rocksdb/pull/11016#pullrequestreview-1205020134,
flaky test https://app.circleci.com/pipelines/github/facebook/rocksdb/21985/workflows/5f6cc355-78c1-46d8-89ee-0fd679725a8a/jobs/540878 is due to `Flush()` called in the test returned earlier than obsoleted WAL being found in background flush and SyncWAL() was called (i.e, "sync_point_called" sets to true).  Fix this by making checking `sync_point_called == true` after obsoleted WAL is found and `SyncWAL()` is called. Also rename the "sync_point_called" to be something more specific.

Also, fix a potential flakiness due to manually setting a log threshold to force new manifest creation. This is unreliable so I decided to use sync point to force new manifest creation.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/11016

Test Plan: make check

Reviewed By: pdillinger

Differential Revision: D41717786

Pulled By: hx235

fbshipit-source-id: ad1e4701a987285bbe6c8e7d9b05c4db06b4edf4
 2022-12-06 18:31:43 -08:00