Summary:
The way counters/statistics are implemented in rocksdb demands that enum Tickers and TickerNameMap follow the same order, otherwise statistics exposed from fbcode/rocks get out-of-sync. 2 counters for prefix had violated this order and when I built counters for fbcode/mcrocksdb, statistics for sequence number were appearing out-of-sync.
The other change is to record sequence-number using setTickerCount only and not recordTick. This is because of difference in statistics as understood by rocks/utils which uses ServiceData::statistics function and rocksdb statistics. In rocksdb there is just 1 counter for a countername. But in ServiceData there are 4 independent buckets for every countername-Count, Sum, Average and Rate. SetTickerCount and RecordTick update the same variable in rocksdb but different buckets in ServiceData. Therefore, I had to choose one consistent function from RecordTick or SetTickerCount for sequence number in rocksdb. I chose SetTickerCount because the statistics object in options passed during rocksdb-open is user-dependent and SetTickerCount makes sense there.
There will be a corresponding diff to mcorcksdb in fbcode shortly.
Test Plan: make all check; check ticker value using fprintfs
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12669
Summary: db->DeleteFile calls ParseFileName to check name that was returned for sst file. Now, sst filename is returned using TableFileName which uses MakeFileName. This puts a / at the front of the name and ParseFileName doesn't like that. Changed ParseFileName to tolerate /s at the beginning. The test delet_file_test used to pass earlier because this behaviour of MakeFileName had been changed a while back to not return a / during which delete_file_test was checked in. But MakeFileName had to be reverted to add / at the front because GetLiveFiles used at many places outside rocksdb used the previous behaviour of MakeFileName.
Test Plan: make;./delete_filetest;make all check
Reviewers: dhruba, haobo, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12663
Summary: // won't hurt but a missing / hurts sometimes
Test Plan: make all check; ./db_repl_stress
Reviewers: vamsi
Reviewed By: vamsi
CC: dhruba
Differential Revision: https://reviews.facebook.net/D12621
Summary:
The DeleteFile API was removing files inside the db-lock. This
is now changed to remove files outside the db-lock.
The GetLiveFilesMetadata() returns the smallest and largest
seqnuence number of each file as well.
Test Plan: deletefile_test
Reviewers: emayanke, haobo
Reviewed By: haobo
CC: leveldb
Maniphest Tasks: T63
Differential Revision: https://reviews.facebook.net/D12567
Summary: Let TransformRepFactory own the passed in transform. Also make it better encapsulated.
Test Plan: make valgrind_check;
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12591
Summary:
If ReadOptions.non_blocking_io is set to true, then KeyMayExists
and Iterators will return data that is cached in RAM.
If the Iterator needs to do IO from storage to serve the data,
then the Iterator.status() will return Status::IsRetry().
Test Plan:
Enhanced unit test DBTest.KeyMayExist to detect if there were are IOs
issues from storage. Added DBTest.NonBlockingIteration to verify
nonblocking Iterations.
Reviewers: emayanke, haobo
Reviewed By: haobo
CC: leveldb
Maniphest Tasks: T63
Differential Revision: https://reviews.facebook.net/D12531
Summary:
As title. This is possible as tickers are atomic now.
db_bench on high qps in-memory muti-thread random get workload, showed ~5% throughput improvement.
Test Plan: make check; db_bench; db_stress
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12555
Summary: In KeyMayExist.db_test we do a Flush which causes sst file to be written and added as open file in TableCache, but block cache for the file is not populated. So value_found should have been false where it was true and KeyMayExist.db_test should not have passed earlier. But it passed because BlockReader in table/table.cc takes 2 default arguments at the end called for_compaction and no_io. Although I passed no_io=true from InternalGet to BlockReader, but it understood for_compaction=true and defaulted no_io to false. This is a bug and although will be removed by Dhruba's new patch to incorporate no_io in readoptions, I'm submitting this patch to fix this bug independently of that patch.
Test Plan: make all check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12537
Summary: initialiszer list is fasteri/preferable because it can straightaway call the constructor for this object, otherwise it will be created first and then again initialized. Although gain may not be much in this case because files_ is just a pointer and not a complex object, this is recommended practice.
Test Plan: make all check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12519
Summary: Fix code so that the filter_block layer only assumes keys are internal when prefix_extractor is set.
Test Plan: ./filter_block_test
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12501
Summary: Replace include/leveldb with include/rocksdb.
Test Plan:
make clean; make check
make clean; make release
Differential Revision: https://reviews.facebook.net/D12489
Summary:
This patch adds three new MemTableRep's: UnsortedRep, PrefixHashRep, and VectorRep.
UnsortedRep stores keys in an std::unordered_map of std::sets. When an iterator is requested, it dumps the keys into an std::set and iterates over that.
VectorRep stores keys in an std::vector. When an iterator is requested, it creates a copy of the vector and sorts it using std::sort. The iterator accesses that new vector.
PrefixHashRep stores keys in an unordered_map mapping prefixes to ordered sets.
I also added one API change. I added a function MemTableRep::MarkImmutable. This function is called when the rep is added to the immutable list. It doesn't do anything yet, but it seems like that could be useful. In particular, for the vectorrep, it means we could elide the extra copy and just sort in place. The only reason I haven't done that yet is because the use of the ArenaAllocator complicates things (I can elaborate on this if needed).
Test Plan:
make -j32 check
./db_stress --memtablerep=vector
./db_stress --memtablerep=unsorted
./db_stress --memtablerep=prefixhash --prefix_size=10
Reviewers: dhruba, haobo, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12117
Summary: If use_prefix_filters is set and read_range>1, then the random seeks will set a the prefix filter to be the prefix of the key which was randomly selected as the target. Still need to add statistics (perhaps in a separate diff).
Test Plan: ./db_bench --benchmarks=fillseq,prefixscanrandom --num=10000000 --statistics=1 --use_prefix_blooms=1 --use_prefix_api=1 --bloom_bits=10
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, haobo
Differential Revision: https://reviews.facebook.net/D12273
Summary: An api to query the level, key ranges, size etc for each SST file and an api to delete a specific file from the db and all associated state in the bookkeeping datastructures.
Notes: Editing the manifest version does not release the obsolete files right away. However deleting the file directly will mess up the iterator. We may need a more aggressive/timely file deletion api.
I have used std::unique_ptr - will switch to boost:: since this is external. thoughts?
Unit test is fragile right now as it expects the compaction at certain levels.
Test Plan: unittest
Reviewers: dhruba, vamsi, emayanke
CC: zshao, leveldb, haobo
Task ID: #
Blame Rev:
Summary:
Sometimes you don't need to iterate through the whole WriteBatch. This diff makes the Handler member functions return a bool that indicates whether to abort or not. If they return true, the iteration stops.
One thing I just thought of is that this will break backwards-compability. Maybe it would be better to add a virtual member function WriteBatch::Handler::ShouldAbort() that returns false by default. Comments requested.
I still have to add a new unit test for the abort code, but let's finalize the API first.
Test Plan: make -j32 check
Reviewers: dhruba, haobo, vamsi, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12339
Summary: Was going through the iterator related code, did some cleanup along the way. Basically replaced array with vector and adopted range based loop where applicable.
Test Plan: make check; make valgrind_check
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12435
Test Plan:
- make all check;
- make release;
- make stringappend_test; ./stringappend_test
Reviewers: haobo, emayanke
Reviewed By: haobo
CC: leveldb, kailiu
Differential Revision: https://reviews.facebook.net/D12381
Summary: Also expanded class LogFile to have startSequene and FileSize and exposed it publicly
Test Plan: make all check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12087
Summary:
-Added null checks and revisions to DBIter::MergeValuesNewToOld()
-Added DBIter test to stringappend_test
-Major fix with Merge and TTL
More plans for fixes later.
Test Plan:
-make clean; make stringappend_test -j 32; ./stringappend_test
-make all check;
Reviewers: haobo, emayanke, vamsi, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12315
Summary: statistic for sequence number is needed by wormhole. setTickerCount is demanded for this statistic. I can't simply recordTick(max_sequence) when db recovers because the statistic iobject is owned by client and may/may not be reset during reopen. Eg. statistic is reset in mcrocksdb whereas it is not in db_stress. Therefore it is best to go with setTickerCount
Test Plan: ./db_stress ... --statistics=1 and observed expected sequence number
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12327
Summary:
In release, "found variable assigned but not used anywhere". Changed it to work with
assert. Someone accept this :).
Test Plan: make release -j 32
Reviewers: haobo, dhruba, emayanke
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12309
Summary:
Updated db_bench and utilities/merge_operators.h to allow for dynamic benchmarking
of merge operators in db_bench. Added a new test (--benchmarks=mergerandom), which performs
a bunch of random Merge() operations over random keys. Also added a "--merge_operator=" flag
so that the tester can easily benchmark different merge operators. Currently supports
the PutOperator and UInt64Add operator. Support for stringappend or list append may come later.
Test Plan:
1. make db_bench
2. Test the PutOperator (simulating Put) as follows:
./db_bench --benchmarks=fillrandom,readrandom,updaterandom,readrandom,mergerandom,readrandom --merge_operator=put
--threads=2
3. Test the UInt64AddOperator (simulating numeric addition) similarly:
./db_bench --value_size=8 --benchmarks=fillrandom,readrandom,updaterandom,readrandom,mergerandom,readrandom
--merge_operator=uint64add --threads=2
Reviewers: haobo, dhruba, zshao, MarkCallaghan
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11535
Summary:
Minor fix to current codes, including: coding style, output format,
comments. No major logic change. There are only 2 real changes, please see my inline comments.
Test Plan: make all check
Reviewers: haobo, dhruba, emayanke
Differential Revision: https://reviews.facebook.net/D12297
Summary:
This patch adds the ability for the user to add sequences of arbitrary data (blobs) to write batches. These blobs are saved to the log along with everything else in the write batch. You can add multiple blobs per WriteBatch and the ordering of blobs, puts, merges, and deletes are preserved.
Blobs are not saves to SST files. RocksDB ignores blobs in every way except for writing them to the log.
Before committing this patch, I need to add some test code. But I'm submitting it now so people can comment on the API.
Test Plan: make -j32 check
Reviewers: dhruba, haobo, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12195
Summary:
As title. No locking/atomic is needed due to thread local. There is also no need to modify the existing client interface, in order to expose related counters.
perf_context_test shows a simple example of retrieving the number of user key comparison done for each put and get call. More counters could be added later.
Sample output
./perf_context_test 1000000
==== Test PerfContextTest.KeyComparisonCount
Inserting 1000000 key/value pairs
...
total user key comparison get: 43446523
total user key comparison put: 8017877
max user key comparison get: 88939
avg user key comparison get:43
Basically, the current skiplist does well on average, but could perform poorly in extreme cases.
Test Plan: run perf_context_test <total number of entries to put/get>
Reviewers: dhruba
Differential Revision: https://reviews.facebook.net/D12225
Summary:
With Merge returning bool, it can keep failing silently(eg. While faling to fetch timestamp in TTL). We need to detect this through a rocksdb counter which can get bumped whenever Merge returns false. This will also be super-useful for the mcrocksdb-counter service where Merge may fail.
Added a counter NUMBER_MERGE_FAILURES and appropriately updated db/merge_helper.cc
I felt that it would be better to directly add counter-bumping in Merge as a default function of MergeOperator class but user should not be aware of this, so this approach seems better to me.
Test Plan: make all check
Reviewers: dnicholas, haobo, dhruba, vamsi
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12129
Summary: Similar to v2 (db and table code understands prefixes), but use ReadOptions as in v3. Also, make the CreateFilter code faster and cleaner.
Test Plan: make db_test; export LEVELDB_TESTS=PrefixScan; ./db_test
Reviewers: dhruba
Reviewed By: dhruba
CC: haobo, emayanke
Differential Revision: https://reviews.facebook.net/D12027
Summary:
If we have same compaction filter for each compaction,
application cannot know about the different compaction processes.
Later on, we can put in more details in compaction filter for the
application to consume and use it according to its needs. For e.g. In
the universal compaction, we have a compaction process involving all the
files while others don't involve all the files. Applications may want to
collect some stats only when during full compaction.
Test Plan: run existing unit tests
Reviewers: haobo, dhruba
Reviewed By: dhruba
CC: xinyaohu, leveldb
Differential Revision: https://reviews.facebook.net/D12057
Summary:
The pre-existing code was purging a DeleteMarker if thay key did not
exist in deeper levels. But in the Universal Compaction Style, all
files are in Level0. For compaction runs that did not include the
earliest file, we were erroneously purging the DeleteMarkers.
The fix is to purge DeleteMarkers only if the compaction includes
the earlist file.
Test Plan: DBTest.Randomized triggers this code path.
Differential Revision: https://reviews.facebook.net/D12081
Summary:
Continue fixing existing unit tests for universal compaction. I have
tried to apply universal compaction to all unit tests those haven't
called ChangeOptions(). I left a few which are either apparently not
applicable to universal compaction (because they check files/keys/values
at level 1 or above levels), or apparently not related to compaction
(e.g., open a file, open a db).
I also add a new unit test for universal compaction.
Good news is I didn't see any bugs during this round.
Test Plan: Ran "make all check" yesterday. Has rebased and is rerunning
Reviewers: haobo, dhruba
Differential Revision: https://reviews.facebook.net/D12135
Summary: Currently, VersionEdit::DebugString always display internal keys in the original ascii format. This could cause manifest dump to be truncated if internal keys contain special charactors (like null). Also added an option --input_key_hex for ldb idump to indicate that the passed in user keys are in hex.
Test Plan: run ldb manifest_dump
Reviewers: dhruba, emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12111
Summary:
This is the first step to fix unit tests and bugs for universal
compactiion. I added universal compaction option to ChangeOptions(), and
fixed all unit tests calling ChangeOptions(). Some of these tests
obviously assume more than 1 level and check file number/values in level
1 or above levels. I set kSkipUniversalCompaction for these tests.
The major bug I found is manual compaction with universal compaction never stops. I have put a fix for
it.
I have also set universal compaction as the default compaction and found
at least 20+ unit tests failing. I haven't looked into the details. The
next step is to check all unit tests without calling ChangeOptions().
Test Plan: make all check
Reviewers: dhruba, haobo
Differential Revision: https://reviews.facebook.net/D12051
Summary:
Here are the major changes to the Merge Interface. It has been expanded
to handle cases where the MergeOperator is not associative. It does so by stacking
up merge operations while scanning through the key history (i.e.: during Get() or
Compaction), until a valid Put/Delete/end-of-history is encountered; it then
applies all of the merge operations in the correct sequence starting with the
base/sentinel value.
I have also introduced an "AssociativeMerge" function which allows the user to
take advantage of associative merge operations (such as in the case of counters).
The implementation will always attempt to merge the operations/operands themselves
together when they are encountered, and will resort to the "stacking" method if
and only if the "associative-merge" fails.
This implementation is conjectured to allow MergeOperator to handle the general
case, while still providing the user with the ability to take advantage of certain
efficiencies in their own merge-operator / data-structure.
NOTE: This is a preliminary diff. This must still go through a lot of review,
revision, and testing. Feedback welcome!
Test Plan:
-This is a preliminary diff. I have only just begun testing/debugging it.
-I will be testing this with the existing MergeOperator use-cases and unit-tests
(counters, string-append, and redis-lists)
-I will be "desk-checking" and walking through the code with the help gdb.
-I will find a way of stress-testing the new interface / implementation using
db_bench, db_test, merge_test, and/or db_stress.
-I will ensure that my tests cover all cases: Get-Memtable,
Get-Immutable-Memtable, Get-from-Disk, Iterator-Range-Scan, Flush-Memtable-to-L0,
Compaction-L0-L1, Compaction-Ln-L(n+1), Put/Delete found, Put/Delete not-found,
end-of-history, end-of-file, etc.
-A lot of feedback from the reviewers.
Reviewers: haobo, dhruba, zshao, emayanke
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11499
Summary: This diff adds histogram stats for soft_rate_limit stalls. It also renames the old rate_limit stats to hard_rate_limit.
Test Plan: make -j32 check
Reviewers: dhruba, haobo, MarkCallaghan
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12021
Summary: rocksdb replicaiton will need this when writing value+TS from master to slave 'as is'
Test Plan: make
Reviewers: dhruba, vamsi, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11919
Summary:
This diff adds support for both soft and hard rate limiting. The following changes are included:
1) Options.rate_limit is renamed to Options.hard_rate_limit.
2) Options.rate_limit_delay_milliseconds is renamed to Options.rate_limit_delay_max_milliseconds.
3) Options.soft_rate_limit is added.
4) If the maximum compaction score is > hard_rate_limit and rate_limit_delay_max_milliseconds == 0, then writes are delayed by 1 ms at a time until the max compaction score falls below hard_rate_limit.
5) If the max compaction score is > soft_rate_limit but <= hard_rate_limit, then writes are delayed by 0-1 ms depending on how close we are to hard_rate_limit.
6) Users can disable 4 by setting hard_rate_limit = 0. They can add a limit to the maximum amount of time waited by setting rate_limit_delay_max_milliseconds > 0. Thus, the old behavior can be preserved by setting soft_rate_limit = 0, which is the default.
Test Plan:
make -j32 check
./db_stress
Reviewers: dhruba, haobo, MarkCallaghan
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12003
Summary: Implemented a TtlMergeOperator class which inherits from MergeOperator and is TTL aware. It strips out timestamp from existing_value and attaches timestamp to new_value, calling user-provided-Merge in between.
Test Plan: make all check
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11775
Summary: Removed KeyMayExistImpl because KeyMayExist demanded Get like semantics now. Removed no_io from memtable and imm because we need the proper value now and shouldn't just stop when we see Merge in memtable. Added checks to block_cache. Updated documentation and unit-test
Test Plan: make all check;db_stress for 1 hour
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11853
Summary:
Currently, when a certain number of level0 files (level0_slowdown_writes_trigger) are present, RocksDB will slow down each write by 1ms. There is a second limit of level0 files at which RocksDB will stop writes altogether (level0_stop_writes_trigger).
This patch enables the user to supply a third parameter specifying the number of files at which Rocks will start slowing down writes (level0_start_slowdown_writes). When this number is reached, Rocks will slow down writes as a quadratic function of level0_slowdown_writes_trigger - num_level0_files.
For some workloads, this improves latency and throughput. I will post some stats momentarily in https://our.intern.facebook.com/intern/tasks/?t=2613384.
Test Plan:
make -j32 check
./db_stress
./db_bench
Reviewers: dhruba, haobo, MarkCallaghan, xjin
Reviewed By: xjin
CC: leveldb, xjin, zshao
Differential Revision: https://reviews.facebook.net/D11859
Summary:
Add an option for arena block size, default value 4096 bytes. Arena will allocate blocks with such size.
I am not sure about passing parameter to skiplist in the new virtualized framework, though I talked to Jim a bit. So add Jim as reviewer.
Test Plan:
new unit test, I am running db_test.
For passing paramter from configured option to Arena, I tried tests like:
TEST(DBTest, Arena_Option) {
std::string dbname = test::TmpDir() + "/db_arena_option_test";
DestroyDB(dbname, Options());
DB* db = nullptr;
Options opts;
opts.create_if_missing = true;
opts.arena_block_size = 1000000; // tested 99, 999999
Status s = DB::Open(opts, dbname, &db);
db->Put(WriteOptions(), "a", "123");
}
and printed some debug info. The results look good. Any suggestion for such a unit-test?
Reviewers: haobo, dhruba, emayanke, jpaton
Reviewed By: dhruba
CC: leveldb, zshao
Differential Revision: https://reviews.facebook.net/D11799
Summary: After my patch for stall histograms, there are redundant calls to NowMicros() by both the stop watches and DBImpl::MakeRoomForWrites. So I removed the redundant calls such that the information is gotten from the stopwatch.
Test Plan:
make clean
make -j32 check
Reviewers: dhruba, haobo, MarkCallaghan
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11883
Summary: Currently, merge_test uses /tmp/testdb for the test database. It should really use something more specific to merge_test. Most of the other tests use test::TmpDir() + "/<test name>db". This patch implements such behavior for merge_test; it makes merge_test use test::TmpDir() + "/merge_testdb"
Test Plan:
make clean
make -j32 merge_test
./merge_test
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11877
Summary: Previously, statistics are kept on how much time is spent on stalls of different types. This patch adds support for keeping number of stalls of each type. For example, instead of just reporting how many microseconds are spent waiting for memtables to be compacted, it will also report how many times a write stalled for that to occur.
Test Plan:
make -j32 check
./db_stress
# Not really sure what else should be done...
Reviewers: dhruba, MarkCallaghan, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11841
Summary:
The target file size should be valid value. Only if UniversalCompactionStyle
is enabled then set max file size to be LLONG_MAX.
Test Plan:
Reviewers:
CC:
Task ID: #
Blame Rev:
Summary:
Revert "If disable wal is set, then batch commits are avoided" because
keeping the mutex while inserting into the skiplist means that readers
and writes are all serialized on the mutex.
Test Plan:
Reviewers:
CC:
Task ID: #
Blame Rev:
Summary: This diff virtualizes the skiplist interface so that users can provide their own implementation of a backing store for MemTables. Eventually, the backing store will be responsible for its own synchronization, allowing users (and us) to experiment with different lockless implementations.
Test Plan:
make clean
make -j32 check
./db_stress
Reviewers: dhruba, emayanke, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11739
Summary:
rocksdb uses batch commit to write to transaction log. But if
disable wal is set, then writes to transaction log are anyways
avoided. In this case, there is not much value-add to batch things,
batching can cause unnecessary delays to Puts().
This patch avoids batching when disableWal is set.
Test Plan:
make check.
I am running db_stress now.
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11763
Summary:
Introduced KeyMayExist checking during writebatch-delete and removed from Outer Delete API because it uses writebatch-delete.
Added code to skip getting Table from disk if not already present in table_cache.
Some renaming of variables.
Introduced KeyMayExistImpl which allows checking since specified sequence number in GetImpl useful to check partially written writebatch.
Changed KeyMayExist to not be pure virtual and provided a default implementation.
Expanded unit-tests in db_test to check appropriately.
Ran db_stress for 1 hour with ./db_stress --max_key=100000 --ops_per_thread=10000000 --delpercent=50 --filter_deletes=1 --statistics=1.
Test Plan: db_stress;make check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D11745
Summary: As title. This diff added an option reduce_level to CompactRange. When set to true, it will try to move the files back to the minimum level sufficient to hold the data set. Note that the default is set to true now, just to excerise it in all existing tests. Will set the default to false before check-in, for backward compatibility.
Test Plan: make check;
Reviewers: dhruba, emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11553
Summary:
The maxGrandParentOverlapBytes_ was signed which was causing
an erroneous comparision between signed and unsigned longs.
This, in turn, was causing compaction-created-output-files
to be very small in size.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D11727
Summary: NewBloomFilterPolicy call requires Delete to be called later on
Test Plan: make; valgrind ./db_test
Reviewers: haobo, dhruba, vamsi
Differential Revision: https://reviews.facebook.net/D11667
Summary:
Wrote a new function in db_impl.c-CheckKeyMayExist that calls Get but with a new parameter turned on which makes Get return false only if bloom filters can guarantee that key is not in database. Delete calls this function and if the option- deletes_use_filter is turned on and CheckKeyMayExist returns false, the delete will be dropped saving:
1. Put of delete type
2. Space in the db,and
3. Compaction time
Test Plan:
make all check;
will run db_stress and db_bench and enhance unit-test once the basic design gets approved
Reviewers: dhruba, haobo, vamsi
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11607
Summary:
This diff is more about my question when reading compaction codes,
instead of a normal diff. I don't quite understand the logic here.
Test Plan: I didn't do any test. If this is a bug, I will continue doing some test.
Reviewers: haobo, dhruba, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11661
Summary:
Rename PickCompactionHybrid to PickCompactionUniversal.
Changed a few LOG message from "Hybrid:" to "Universal:".
Test Plan:
Reviewers:
CC:
Task ID: #
Blame Rev:
Summary: Replication logic would be simplifeid if we can guarantee that write sequence number is always contiguous, even if write failure occurs. Dhruba and I looked at the sequence number generation part of the code. It seems fixable. Note that if WAL was successful and insert into memtable was not, we would be in an unfortunate state. The approach in this diff is : IO error is expected and error status will be returned to client, sequence number will not be advanced; In-mem error is not expected and we panic.
Test Plan: make check; db_stress
Reviewers: dhruba, sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11439
Summary:
There is a new option called hybrid_mode which, when switched on,
causes HBase style compactions. Files from L0 are
compacted back into L0. This meat of this compaction algorithm
is in PickCompactionHybrid().
All files reside in L0. That means all files have overlapping
keys. Each file has a time-bound, i.e. each file contains a
range of keys that were inserted around the same time. The
start-seqno and the end-seqno refers to the timeframe when
these keys were inserted. Files that have contiguous seqno
are compacted together into a larger file. All files are
ordered from most recent to the oldest.
The current compaction algorithm starts to look for
candidate files starting from the most recent file. It continues to
add more files to the same compaction run as long as the
sum of the files chosen till now is smaller than the next
candidate file size. This logic needs to be debated
and validated.
The above logic should reduce write amplification to a
large extent... will publish numbers shortly.
Test Plan: dbstress runs for 6 hours with no data corruption (tested so far).
Differential Revision: https://reviews.facebook.net/D11289
Summary: As title. Exposed a Count function that returns the number of updates in a batch. Could be handy for replication sequence number check.
Test Plan: make check;
Reviewers: emayanke, sheki, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11523
Summary: This diff added an option to control the incremenal sync frequency. db_bench has a new flag bytes_per_sync for easy tuning exercise.
Test Plan: make check; db_bench
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11295
Summary:
simplify the printing code in db_bench
use TickersMap and HistogramsNameMap introduced in previous diffs.
Test Plan: ./db_bench --statistics=1 and see if all the statistics are printed
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11355
Summary:
Merge multiple multiple memtables in memory before writing it
out to a file in L0.
There is a new config parameter min_write_buffer_number_to_merge
that specifies the number of write buffers that should be merged
together to a single file in storage. The system will not flush
wrte buffers to storage unless at least these many buffers have
accumulated in memory.
The default value of this new parameter is 1, which means that
a write buffer will be immediately flushed to disk as soon it is
ready.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D11241
Summary:
Use a bit set to keep track of which random number is generated.
Currently only supports single-threaded. All our perf tests are run with threads=1
Copied over bitset implementation from common/datastructures
Test Plan: printed the generated keys, and verified all keys were present.
Reviewers: MarkCallaghan, haobo, dhruba
Reviewed By: MarkCallaghan
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11247
Summary: This hopefully gives the right semantics to compaction filter. Will write a small wiki to explain the ideas.
Test Plan: make check; db_stress
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11121
Summary: Table is setup for compaction using Table::SetupForCompaction. So read block calls can be differentiated b/w Gets/Compaction. Use this and measure times.
Test Plan: db_bench --statistics=1
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: leveldb, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D11217
Summary:
Preliminary! Introduced the --use_multiget=1 and --keys_per_multiget=n
flags for db_bench. Also updated and tested the ReadRandom() method
to include an option to use multiget. By default,
keys_per_multiget=100.
Preliminary tests imply that multiget is at least 1.25x faster per
key than regular get.
Will continue adding Multiget for ReadMissing, ReadHot,
RandomWithVerify, ReadRandomWriteRandom; soon. Will also think
about ways to better verify benchmarks.
Test Plan:
1. make db_bench
2. ./db_bench --benchmarks=fillrandom
3. ./db_bench --benchmarks=readrandom --use_existing_db=1
--use_multiget=1 --threads=4 --keys_per_multiget=100
4. ./db_bench --benchmarks=readrandom --use_existing_db=1
--threads=4
5. Verify ops/sec (and 1000000 of 1000000 keys found)
Reviewers: haobo, MarkCallaghan, dhruba
Reviewed By: MarkCallaghan
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11127
Summary:
This diff simplifies EnvOptions by treating it as POD, similar to Options.
- virtual functions are removed and member fields are accessed directly.
- StorageOptions is removed.
- Options.allow_readahead and Options.allow_readahead_compactions are deprecated.
- Unused global variables are removed: useOsBuffer, useFsReadAhead, useMmapRead, useMmapWrite
Test Plan: make check; db_stress
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11175
Summary:
The code was such that if multi-threaded-compactions as well
as seek compaction are enabled then it submits multiple
compaction request for the same range of keys. This causes
extraneous sst-files to accumulate at various levels.
Test Plan:
I am not able to write a very good unit test for this one
but can easily reproduce this bug with 'dbstress' with the
following options.
batch=1;maxk=100000000;ops=100000000;ro=0;fm=2;bpl=10485760;of=500000; wbn=3; mbc=20; mb=2097152; wbs=4194304; dds=1; sync=0; t=32; bs=16384; cs=1048576; of=500000; ./db_stress --disable_seek_compaction=0 --mmap_read=0 --threads=$t --block_size=$bs --cache_size=$cs --open_files=$of --verify_checksum=1 --db=/data/mysql/leveldb/dbstress.dir --sync=$sync --disable_wal=1 --disable_data_sync=$dds --write_buffer_size=$wbs --target_file_size_base=$mb --target_file_size_multiplier=$fm --max_write_buffer_number=$wbn --max_background_compactions=$mbc --max_bytes_for_level_base=$bpl --reopen=$ro --ops_per_thread=$ops --max_key=$maxk --test_batches_snapshots=$batch
Reviewers: leveldb, emayanke
Reviewed By: emayanke
Differential Revision: https://reviews.facebook.net/D11055
Summary:
The current code prints the name of the InternalKeyComparator
in the log file. We would also like to print the name of the
user-specified comparator for easier debugging.
Test Plan: make check
Reviewers: sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11181
Summary:
Without this files could be written out to a level greater than the maximum level possible and is the source of the segfaults that wormhole awas getting. The sequence of steps that was followed:
1. WriteLevel0Table was called when memtable was to be flushed for a file.
2. PickLevelForMemTableOutput was called to determine the level to which this file should be pushed.
3. PickLevelForMemTableOutput returned a wrong result because max_mem_compaction_level was equal to 2 even when num_levels was equal to 0.
The fix to re-initialize max_mem_compaction_level based on num_levels passed seems correct.
Test Plan: make all check; Also made a dummy file to mimic the wormhole-file behaviour which was causing the segfaults and found that the same segfault occurs without this change and not with this.
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11157
Summary:
Implemented the MultiGet operator which takes in a list of keys
and returns their associated values. Currently uses std::vector as its
container data structure. Otherwise, it works identically to "Get".
Test Plan:
1. make db_test ; compile it
2. ./db_test ; test it
3. make all check ; regress / run all tests
4. make release ; (optional) compile with release settings
Reviewers: haobo, MarkCallaghan, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10875
Summary: Added the 'score' column to the compaction stats output, which shows the level total size devided by level target size. Could be useful when monitoring compaction decisions...
Test Plan: make check; db_bench
Reviewers: dhruba
CC: leveldb, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D11025
Summary:
This diff adds an option to specify whether PTHREAD_MUTEX_ADAPTIVE_NP will be enabled for the rocksdb single big kernel lock. db_bench also have this option now.
Quickly tested 8 thread cpu bound 100 byte random read.
No fast mutex: ~750k/s ops
With fast mutex: ~880k/s ops
Test Plan: make check; db_bench; db_stress
Reviewers: dhruba
CC: MarkCallaghan, leveldb
Differential Revision: https://reviews.facebook.net/D11031
Summary:
Current posix advice implementation ties up the access pattern hint with the creation of a file.
It is not possible to apply different advice for different access (random get vs compaction read),
without keeping two open files for the same table. This patch extended the RandomeAccessFile interface
to accept new access hint at anytime. Particularly, we are able to set different access hint on the same
table file based on when/how the file is used.
Two options are added to set the access hint, after the file is first opened and after the file is being
compacted.
Test Plan: make check; db_stress; db_bench
Reviewers: dhruba
Reviewed By: dhruba
CC: MarkCallaghan, leveldb
Differential Revision: https://reviews.facebook.net/D10905
Summary: Enhance the statitics to report the number of open db iterators.
Test Plan: make check
Reviewers: haobo, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10983
Summary: Overriding block_size_deviation to zero, so that CorruptionTest can pass.
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D10977
Summary: a new option block_size_deviation is added.
Test Plan: run db_test and db_bench
Reviewers: dhruba, haobo
Reviewed By: haobo
Differential Revision: https://reviews.facebook.net/D10821
Summary: MaybeDumpStats was causing lock problem
Test Plan: make check; db_stress
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D10935
Summary:
Added an option stats_dump_period_sec to dump leveldb.stats to LOG periodically for diagnosis.
By defauly, it's set to a very big number 3600 (1 hour).
Test Plan: make check;
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, zshao
Differential Revision: https://reviews.facebook.net/D10761
Summary: There was an artifical limit on the size of the write buffer size.
Test Plan: make check
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10911
Summary:
The valgrind errors were in the unit tests where we change the
number of levels of a database using internal methods.
Test Plan:
valgrind ./reduce_levels_test
valgrind ./db_test
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10893
Summary: Make Statistics usable by client
Test Plan: make check; db_bench
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D10899
Summary:
Currently, with paranoid_check on, DB::Open will fail on any log read error on recovery.
If client is ok with losing most recent updates, we could simply skip those errors.
However, it's important to introduce an additional flag, so that paranoid_check can
still guard against more serious problems.
Test Plan: make check; db_stress
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb, emayanke
Differential Revision: https://reviews.facebook.net/D10869
Summary:
There is an existing field Options.max_bytes_for_level_multiplier that
sets the multiplier for the size of each level in the database.
This patch introduces the ability to set different multipliers
for every level in the database. The size of a level is determined
by using both max_bytes_for_level_multiplier as well as the
per-level fanout.
size of level[i] = size of level[i-1] * max_bytes_for_level_multiplier
* fanout[i-1]
The default value of fanout is 1, so that it is backward compatible.
Test Plan: make check
Reviewers: haobo, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10863
Summary:
The merge operator diff introduced a performance problem in MemTable::Get.
An exit condition is missed when the current key does not match the user key.
This could lead to full memtable scan if the user key is not found.
Test Plan: make check; db_bench
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10851
Summary:
Make stop watch a simple implementation, instead of subclass of a virtual class
Allocate stop watches off the stack instead of heap.
Code is more terse now.
Test Plan: make all check, db_bench with --statistics=1
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10809
Summary: Statistics.h and histogram.h had double based api's to record values. Remove them as they are not used anywhere
Test Plan: make all check
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10815
Summary:
This diff replaces compaction_filter_args and CompactionFilter with a single compaction_filter parameter. It gives CompactionFilter better encapsulation and a similar look to Comparator and MergeOpertor, which improves consistency of the overall interface.
The change is not backward compatible. Nevertheless, the two references in fbcode are not in production yet.
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, zshao
Differential Revision: https://reviews.facebook.net/D10773
Summary:
Currently, compaction filter is run on internal key older than the oldest snapshot, which is incorrect.
Compaction filter should really be run on the most recent internal key when there is no external snapshot.
Test Plan: make check; db_stress
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D10641
Summary:
For level-0 compactions, we try to find if can include more L0 files
in the same compaction run. This causes the 'smallest' and 'largest'
key to get extended to a larger range. But the suceeding call to
ParentRangeInCompaction() was still using the earlier
values of 'smallest' and 'largest',
Because of this bug, a file in L1 can be part of two concurrent
compactions: one L0-L1 compaction and the other L1-L2 compaction.
This should not cause any data loss, but will cause an assertion
failure with debug builds.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D10677
Summary:
WAL files are moved to archive directory and clear only at DB::Open.
Can lead to a lot of space consumption in a Database. Added logic to periodically clear Archive Directory too.
Test Plan: make all check + add unit test
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10617
Summary:
This diff introduces a new Merge operation into rocksdb.
The purpose of this review is mostly getting feedback from the team (everyone please) on the design.
Please focus on the four files under include/leveldb/, as they spell the client visible interface change.
include/leveldb/db.h
include/leveldb/merge_operator.h
include/leveldb/options.h
include/leveldb/write_batch.h
Please go over local/my_test.cc carefully, as it is a concerete use case.
Please also review the impelmentation files to see if the straw man implementation makes sense.
Note that, the diff does pass all make check and truly supports forward iterator over db and a version
of Get that's based on iterator.
Future work:
- Integration with compaction
- A raw Get implementation
I am working on a wiki that explains the design and implementation choices, but coding comes
just naturally and I think it might be a good idea to share the code earlier. The code is
heavily commented.
Test Plan: run all local tests
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb, zshao, sheki, emayanke, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D9651
Summary:
The current code has a bug that take address of stack allocated LogReporter.
It is causing SIGSEGV because the stack address is no longer valid when referenced.
Test Plan: Tested on prod.
Reviewers: haobo, dhruba, heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D10557
Summary: $title
Test Plan: make db_bench . run db_bench and check for expected output
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10521
Summary:
- don't see a point exposing table.h to the public.
- fixed make clean to remove also *.d files.
Test Plan: make check; db_stress
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10479
Summary: D8943 Broke read_missing. Fix it by adding a "." at the end of the generated key
Test Plan: generate, print and check the key has a "."
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10455
Summary:
- removed the compaction_filter_value from the callback interface. Restrict compaction filter to purging values.
- modify some comments to reflect curent status.
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10335
Summary:
Adds the --writes_per_second rate limit for the readwhilewriting test.
The purpose is to optionally avoid saturating storage with writes & compaction
and test read response time when some writes are being done.
Changes the histogram code to also print the p99.99 value
Task ID: #
Blame Rev:
Test Plan:
make check, ran db_bench with it
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10305
Summary:
This diff provides the ability to print out a stacktrace when the process receives certain signals.
Currently, we enable this for the following signals (program error related):
SIGILL SIGSEGV SIGBUS SIGABRT
Application simply #include "util/stack_trace.h" and call leveldb::InstallStackTraceHandler() during initialization, if signal handler is needed. It's not done automatically when openning db, because it's the application(process)'s responsibility to install signal handler and some applications might already have their own (like fbcode).
Sample output:
Received signal 11 (Segmentation fault)
#0 0x408ff0 ./signal_test() [0x408ff0] /home/haobo/rocksdb/util/signal_test.cc:4
#1 0x40827d ./signal_test() [0x40827d] /home/haobo/rocksdb/util/signal_test.cc:24
#2 0x7f8bb183172e /usr/local/fbcode/gcc-4.7.1-glibc-2.14.1/lib/libc.so.6(__libc_start_main+0x10e) [0x7f8bb183172e] ??:0
#3 0x408ebc ./signal_test() [0x408ebc] /home/engshare/third-party/src/glibc/glibc-2.14.1/glibc-2.14.1/csu/../sysdeps/x86_64/elf/start.S:113
Segmentation fault (core dumped)
For each frame, we print the raw pointer, the symbol provided by backtrace_symbols (still not good enough), and the source file/line. Note that address translation is done by directly shell out to addr2line. ??:0 means addr2line fails to do the translation. Hacky, but I think it's good for now.
Test Plan: signal_test.cc
Reviewers: dhruba, MarkCallaghan
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10173
Summary: A better error message. A local change. Did not look at other places where this could be done.
Test Plan: compile
Reviewers: dhruba, MarkCallaghan
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10251
Summary: Simplified level_ptrs by using a std:vector
Test Plan: make check
Reviewers: sheki, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10245
Summary:
FindObsoleteFiles was slow, holding the single big lock, resulted in bad p99 behavior.
Didn't profile anything, but several things could be improved:
1. VersionSet::AddLiveFiles works with std::set, which is by itself slow (a tree).
You also don't know how many dynamic allocations occur just for building up this tree.
switched to std::vector, also added logic to pre-calculate total size and do just one allocation
2. Don't see why env_->GetChildren() needs to be mutex proteced, moved to PurgeObsoleteFiles where
mutex could be unlocked.
3. switched std::set to std:unordered_set, the conversion from vector is also inside PurgeObsoleteFiles
I have a feeling this should pretty much fix it.
Test Plan: make check; db_stress
Reviewers: dhruba, heyongqiang, MarkCallaghan
Reviewed By: dhruba
CC: leveldb, zshao
Differential Revision: https://reviews.facebook.net/D10197
Summary: using unique_ptr to have automatic delete for probableWALfiles in db_impl.cc
Test Plan: make
Reviewers: sheki, dhruba
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10083
Summary:
The segfault was happening because the program was unable to open a new
sst file (as part of the compaction) because the process ran out of
file descriptors.
The fix is to check the return status of the file creation before taking
any other action.
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fabf03f9700 (LWP 29904)]
leveldb::DBImpl::OpenCompactionOutputFile (this=this@entry=0x7fabf9011400, compact=compact@entry=0x7fabf741a2b0) at db/db_impl.cc:1399
1399 db/db_impl.cc: No such file or directory.
(gdb) where
Test Plan: make check
Reviewers: MarkCallaghan, sheki
Reviewed By: MarkCallaghan
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10101
Summary:
Transaction Log Iterator did not move to the next file in the series if there was a write batch at the end of the currentFile.
The solution is if the last seq no. of the current file is < RequestedSeqNo. Assume the first seqNo. of the next file has to satisfy the request.
Also major refactoring around the code. Moved opening the logreader to a seperate function, got rid of goto.
Test Plan: added a unit test for it.
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb, emayanke
Differential Revision: https://reviews.facebook.net/D10029
Summary:
TableAndFile was a struct used earlier to delete the file as we did not have std::unique_ptr in the codebase.
With Chip introducing C++11 hotness like std::unique_ptr we can do away with the struct.
Test Plan: make all check
Reviewers: haobo, heyongqiang
Reviewed By: heyongqiang
CC: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D9975
Summary:
During recovery, last_updated_manifest number was not set if there were no records in the Write-ahead log.
Now check for the recovered manifest also and set last_updated_manifest file to the max value.
Test Plan: unit test
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9891
Summary:
If a class owns an object:
- If the object can be null => use a unique_ptr. no delete
- If the object can not be null => don't even need new, let alone delete
- for runtime sized array => use vector, no delete.
Test Plan: make check
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb, zshao, sheki, emayanke, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D9783
Summary:
RocksDB does a binary search to look at the files which might contain the requested sequence number at the call GetUpdatesSince.
There was a bug in the binary search => when the file pointed by the middle index of bsearch was empty/corrupt it needst to resize the vector and update indexes.
This now fixes that.
Test Plan: existing unit tests pass.
Reviewers: heyongqiang, dhruba
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9777
Summary:
If the vector returned by GetUpdatesSince is empty, it is still returned to the
user. This causes it throw an std::range error.
The probable file list is checked and it returns an IOError status instead of OK now.
Test Plan: added a unit test.
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9771
Summary:
Use non mmapd files for Write-Ahead log.
Earlier use of MMaped files. made the log iterator read ahead and miss records.
Now the reader and writer will point to the same physical location.
There is no perf regression :
./db_bench --benchmarks=fillseq --db=/dev/shm/mmap_test --num=$(million 20) --use_existing_db=0 --threads=2
with This diff :
fillseq : 10.756 micros/op 185281 ops/sec; 20.5 MB/s
without this dif :
fillseq : 11.085 micros/op 179676 ops/sec; 19.9 MB/s
Test Plan: unit test included
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9741
Summary:
Earlier Statistics object was a raw pointer. This meant the user had to clear up
the Statistics object after creating the database. In most use cases the database is created in a function and the statistics pointer is out of scope. Hence the statistics object would never be deleted.
Now Using a shared_ptr to manage this.
Want this in before the next release.
Test Plan: make all check.
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9735
Summary: rocksdb uses a single global lock to protect in memory metadata. We should minimize the mutex protected code section to increase the effective parallelism of the program. See https://our.intern.facebook.com/intern/tasks/?t=2218928
Test Plan:
make check
db_bench
Reviewers: dhruba, heyongqiang
CC: zshao, leveldb
Differential Revision: https://reviews.facebook.net/D9705
Summary:
The unit test fails as our solution does not work with MMap'd files.
Disable the failing unit test. Put it back with the next diff which should fix the problem.
Test Plan: db_test
Reviewers: heyongqiang
CC: dhruba
Differential Revision: https://reviews.facebook.net/D9645
Summary:
* Add a method to check if the log reader is at EOF.
* If we know a record has been flushed force the log_reader to believe it is not at EOF, using a new method UnMarkEof().
This does not work with MMpaed files.
Test Plan: added a unit test.
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9567
Summary:
The events that trigger compaction:
* opening the database
* Get -> only if seek compaction is not disabled and other checks are true
* MakeRoomForWrite -> when memtable is full
* BackgroundCall ->
If the background thread is about to do a compaction run, it schedules
a new background task to trigger a possible compaction. This will cause
additional background threads to find and process other compactions that
can run concurrently.
Test Plan: ran db_bench with overwrite and readonly alternatively.
Reviewers: sheki, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9579
Summary:
This patch allows an application to specify whether to use bufferedio,
reads-via-mmaps and writes-via-mmaps per database. Earlier, there
was a global static variable that was used to configure this functionality.
The default setting remains the same (and is backward compatible):
1. use bufferedio
2. do not use mmaps for reads
3. use mmap for writes
4. use readaheads for reads needed for compaction
I also added a parameter to db_bench to be able to explicitly specify
whether to do readaheads for compactions or not.
Test Plan: make check
Reviewers: sheki, heyongqiang, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9429
Summary: Some comparisons left in log_test.cc and db_test.cc complained by make
Test Plan: make
Reviewers: dhruba, sheki
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D9537
Summary: Makefile had options to ignore sign-comparisons and unused-parameters, which should be there. Also fixed the specific errors in the code-base
Test Plan: make
Reviewers: chip, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9531
Summary:
Add --benchmarks=levelstats option to report per-level stats (#files, #bytes)
Change readwhilewriting test to report response time for writes but exclude
them from the stats merged by all threads.
Prevent "NaN" in stats output by preventing division by 0.
Remove "o" file I committed by mistake.
Task ID: #
Blame Rev:
Test Plan:
make check
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D9513
Summary:
Rocksdb can create 0 sized log files when it is opened and closed without any operations.
The GetUpdatesSince fails currently if there is a log file of size zero.
This diff fixes this. If there is a log file is 0, it is removed form the probable_file_list
Test Plan: unit test
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9507
Summary:
Instead of checking for number of files in L0. Check for number of files in the requested level.
Bug introduced in D4929 (diff trying to do too many things).
Test Plan: db_test.
Reviewers: dhruba, MarkCallaghan
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D9483
Summary:
Add --benchmarks=updaterandom for read-modify-write workloads. This is different
from --benchmarks=readrandomwriterandom in a few ways. First, an "operation" is the
combined time to do the read & write rather than treating them as two ops. Second,
the same key is used for the read & write.
Change RandomGenerator to support rows larger than 1M. That was using "assert"
to fail and assert is compiled-away when -DNDEBUG is used.
Add more options to db_bench
--duration - sets the number of seconds for tests to run. When not set the
operation count continues to be the limit. This is used by random operation
tests.
--use_snapshot - when set GetSnapshot() is called prior to each random read.
This is to measure the overhead from using snapshots.
--get_approx - when set GetApproximateSizes() is called prior to each random
read. This is to measure the overhead for a query optimizer.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D9267
Summary: Fix for memory leaks in rocksdb tests. Also modified the variable NUM_FAILED_TESTS to print the actual number of failed tests.
Test Plan: make <test>; valgrind --leak-check=full ./<test>
Reviewers: sheki, dhruba
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9333
Summary:
SizeBeingCompacted was called without any lock protection. This causes
crashes, especially when running db_bench with value_size=128K.
The fix is to compute SizeUnderCompaction while holding the mutex and
passing in these values into the call to Finalize.
(gdb) where
#4 leveldb::VersionSet::SizeBeingCompacted (this=this@entry=0x7f0b490931c0, level=level@entry=4) at db/version_set.cc:1827
#5 0x000000000043a3c8 in leveldb::VersionSet::Finalize (this=this@entry=0x7f0b490931c0, v=v@entry=0x7f0b3b86b480) at db/version_set.cc:1420
#6 0x00000000004418d1 in leveldb::VersionSet::LogAndApply (this=0x7f0b490931c0, edit=0x7f0b3dc8c200, mu=0x7f0b490835b0, new_descriptor_log=<optimized out>) at db/version_set.cc:1016
#7 0x00000000004222b2 in leveldb::DBImpl::InstallCompactionResults (this=this@entry=0x7f0b49083400, compact=compact@entry=0x7f0b2b8330f0) at db/db_impl.cc:1473
#8 0x0000000000426027 in leveldb::DBImpl::DoCompactionWork (this=this@entry=0x7f0b49083400, compact=compact@entry=0x7f0b2b8330f0) at db/db_impl.cc:1757
#9 0x0000000000426690 in leveldb::DBImpl::BackgroundCompaction (this=this@entry=0x7f0b49083400, madeProgress=madeProgress@entry=0x7f0b41bf2d1e, deletion_state=...) at db/db_impl.cc:1268
#10 0x0000000000428f42 in leveldb::DBImpl::BackgroundCall (this=0x7f0b49083400) at db/db_impl.cc:1170
#11 0x000000000045348e in BGThread (this=0x7f0b49023100) at util/env_posix.cc:941
#12 leveldb::(anonymous namespace)::PosixEnv::BGThreadWrapper (arg=0x7f0b49023100) at util/env_posix.cc:874
#13 0x00007f0b4a7cf10d in start_thread (arg=0x7f0b41bf3700) at pthread_create.c:301
#14 0x00007f0b49b4b11d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:115
Test Plan:
make check
I am running db_bench with a value size of 128K to see if the segfault is fixed.
Reviewers: MarkCallaghan, sheki, emayanke
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9279
Summary:
If there is an error while writing an edit to the manifest file, the manifest
file is closed and reopened to check if the edit made it in. However, if the
re-opening of the manifest is unsuccessful and options.paranoid_checks is set
t true, then the db refuses to accept new puts, effectively putting the db
in readonly mode.
In a future diff, I would like to make the default value of paranoid_check
to true.
Test Plan: make check
Reviewers: sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9201
Summary:
Store the last flushed, seq no. in db_impl. Check against it in
transaction Log iterator. Do not attempt to read ahead if we do not know
if the data is flushed completely.
Does not work if flush is disabled. Any ideas on fixing that?
* Minor change, iter->Next is called the first time automatically for
* the first time.
Test Plan:
existing test pass.
More ideas on testing this?
Planning to run some stress test.
Reviewers: dhruba, heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9087
