Summary:
This change removes the ability to configure the deprecated,
inefficient block-based filter in the public API. Options that would
have enabled it now use "full" (and optionally partitioned) filters.
Existing block-based filters can still be read and used, and a "back
door" way to build them still exists, for testing and in case of trouble.
About the only way this removal would cause an issue for users is if
temporary memory for filter construction greatly increases. In
HISTORY.md we suggest a few possible mitigations: partitioned filters,
smaller SST files, or setting reserve_table_builder_memory=true.
Or users who have customized a FilterPolicy using the
CreateFilter/KeyMayMatch mechanism removed in https://github.com/facebook/rocksdb/issues/9501 will have to upgrade
their code. (It's long past time for people to move to the new
builder/reader customization interface.)
This change also introduces some internal-use-only configuration strings
for testing specific filter implementations while bypassing some
compatibility / intelligence logic. This is intended to hint at a path
toward making FilterPolicy Customizable, but it also gives us a "back
door" way to configure block-based filter.
Aside: updated db_bench so that -readonly implies -use_existing_db
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9535
Test Plan:
Unit tests updated. Specifically,
* BlockBasedTableTest.BlockReadCountTest is tweaked to validate the back
door configuration interface and ignoring of `use_block_based_builder`.
* BlockBasedTableTest.TracingGetTest is migrated from testing
block-based filter access pattern to full filter access patter, by
re-ordering some things.
* Options test (pretty self-explanatory)
Performance test - create with `./db_bench -db=/dev/shm/rocksdb1 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0` with and without `-use_block_based_filter`, which creates a DB with 21 SST files in L0. Read with `./db_bench -db=/dev/shm/rocksdb1 -readonly -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=30`
Without -use_block_based_filter: readrandom 464 ops/sec, 689280 KB DB
With -use_block_based_filter: readrandom 169 ops/sec, 690996 KB DB
No consistent difference with fillrandom
Reviewed By: jay-zhuang
Differential Revision: D34153871
Pulled By: pdillinger
fbshipit-source-id: 31f4a933c542f8f09aca47fa64aec67832a69738
Summary:
* Inefficient block-based filter is no longer customizable in the public
API, though (for now) can still be enabled.
* Removed deprecated FilterPolicy::CreateFilter() and
FilterPolicy::KeyMayMatch()
* Removed `rocksdb_filterpolicy_create()` from C API
* Change meaning of nullptr return from GetBuilderWithContext() from "use
block-based filter" to "generate no filter in this case." This is a
cleaner solution to the proposal in https://github.com/facebook/rocksdb/issues/8250.
* Also, when user specifies bits_per_key < 0.5, we now round this down
to "no filter" because we expect a filter with >= 80% FP rate is
unlikely to be worth the CPU cost of accessing it (esp with
cache_index_and_filter_blocks=1 or partition_filters=1).
* bits_per_key >= 0.5 and < 1.0 is still rounded up to 1.0 (for 62% FP
rate)
* This also gives us some support for configuring filters from OPTIONS
file as currently saved: `filter_policy=rocksdb.BuiltinBloomFilter`.
Opening from such an options file will enable reading filters (an
improvement) but not writing new ones. (See Customizable follow-up
below.)
* Also removed deprecated functions
* FilterBitsBuilder::CalculateNumEntry()
* FilterPolicy::GetFilterBitsBuilder()
* NewExperimentalRibbonFilterPolicy()
* Remove default implementations of
* FilterBitsBuilder::EstimateEntriesAdded()
* FilterBitsBuilder::ApproximateNumEntries()
* FilterPolicy::GetBuilderWithContext()
* Remove support for "filter_policy=experimental_ribbon" configuration
string.
* Allow "filter_policy=bloomfilter:n" without bool to discourage use of
block-based filter.
Some pieces for https://github.com/facebook/rocksdb/issues/9389
Likely follow-up (later PRs):
* Refactoring toward FilterPolicy Customizable, so that we can generate
filters with same configuration as before when configuring from options
file.
* Remove support for user enabling block-based filter (ignore `bool
use_block_based_builder`)
* Some months after this change, we could even remove read support for
block-based filter, because it is not critical to DB data
preservation.
* Make FilterBitsBuilder::FinishV2 to avoid `using
FilterBitsBuilder::Finish` mess and add support for specifying a
MemoryAllocator (for cache warming)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9501
Test Plan:
A number of obsolete tests deleted and new tests or test
cases added or updated.
Reviewed By: hx235
Differential Revision: D34008011
Pulled By: pdillinger
fbshipit-source-id: a39a720457c354e00d5b59166b686f7f59e392aa
Summary:
Note: rebase on and merge after https://github.com/facebook/rocksdb/pull/9349, https://github.com/facebook/rocksdb/pull/9345, (optional) https://github.com/facebook/rocksdb/pull/9393
**Context:**
(Quoted from pdillinger) Layers of information during new Bloom/Ribbon Filter construction in building block-based tables includes the following:
a) set of keys to add to filter
b) set of hashes to add to filter (64-bit hash applied to each key)
c) set of Bloom indices to set in filter, with duplicates
d) set of Bloom indices to set in filter, deduplicated
e) final filter and its checksum
This PR aims to detect corruption (e.g, unexpected hardware/software corruption on data structures residing in the memory for a long time) from b) to e) and leave a) as future works for application level.
- b)'s corruption is detected by verifying the xor checksum of the hash entries calculated as the entries accumulate before being added to the filter. (i.e, `XXPH3FilterBitsBuilder::MaybeVerifyHashEntriesChecksum()`)
- c) - e)'s corruption is detected by verifying the hash entries indeed exists in the constructed filter by re-querying these hash entries in the filter (i.e, `FilterBitsBuilder::MaybePostVerify()`) after computing the block checksum (except for PartitionFilter, which is done right after each `FilterBitsBuilder::Finish` for impl simplicity - see code comment for more). For this stage of detection, we assume hash entries are not corrupted after checking on b) since the time interval from b) to c) is relatively short IMO.
Option to enable this feature of detection is `BlockBasedTableOptions::detect_filter_construct_corruption` which is false by default.
**Summary:**
- Implemented new functions `XXPH3FilterBitsBuilder::MaybeVerifyHashEntriesChecksum()` and `FilterBitsBuilder::MaybePostVerify()`
- Ensured hash entries, final filter and banding and their [cache reservation ](https://github.com/facebook/rocksdb/issues/9073) are released properly despite corruption
- See [Filter.construction.artifacts.release.point.pdf ](https://github.com/facebook/rocksdb/files/7923487/Design.Filter.construction.artifacts.release.point.pdf) for high-level design
- Bundled and refactored hash entries's related artifact in XXPH3FilterBitsBuilder into `HashEntriesInfo` for better control on lifetime of these artifact during `SwapEntires`, `ResetEntries`
- Ensured RocksDB block-based table builder calls `FilterBitsBuilder::MaybePostVerify()` after constructing the filter by `FilterBitsBuilder::Finish()`
- When encountering such filter construction corruption, stop writing the filter content to files and mark such a block-based table building non-ok by storing the corruption status in the builder.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9342
Test Plan:
- Added new unit test `DBFilterConstructionCorruptionTestWithParam.DetectCorruption`
- Included this new feature in `DBFilterConstructionReserveMemoryTestWithParam.ReserveMemory` as this feature heavily touch ReserveMemory's impl
- For fallback case, I run `./filter_bench -impl=3 -detect_filter_construct_corruption=true -reserve_table_builder_memory=true -strict_capacity_limit=true -quick -runs 10 | grep 'Build avg'` to make sure nothing break.
- Added to `filter_bench`: increased filter construction time by **30%**, mostly by `MaybePostVerify()`
- FastLocalBloom
- Before change: `./filter_bench -impl=2 -quick -runs 10 | grep 'Build avg'`: **28.86643s**
- After change:
- `./filter_bench -impl=2 -detect_filter_construct_corruption=false -quick -runs 10 | grep 'Build avg'` (expect a tiny increase due to MaybePostVerify is always called regardless): **27.6644s (-4% perf improvement might be due to now we don't drop bloom hash entry in `AddAllEntries` along iteration but in bulk later, same with the bypassing-MaybePostVerify case below)**
- `./filter_bench -impl=2 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'` (expect acceptable increase): **34.41159s (+20%)**
- `./filter_bench -impl=2 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'` (by-passing MaybePostVerify, expect minor increase): **27.13431s (-6%)**
- Standard128Ribbon
- Before change: `./filter_bench -impl=3 -quick -runs 10 | grep 'Build avg'`: **122.5384s**
- After change:
- `./filter_bench -impl=3 -detect_filter_construct_corruption=false -quick -runs 10 | grep 'Build avg'` (expect a tiny increase due to MaybePostVerify is always called regardless - verified by removing MaybePostVerify under this case and found only +-1ns difference): **124.3588s (+2%)**
- `./filter_bench -impl=3 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'`(expect acceptable increase): **159.4946s (+30%)**
- `./filter_bench -impl=3 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'`(by-passing MaybePostVerify, expect minor increase) : **125.258s (+2%)**
- Added to `db_stress`: `make crash_test`, `./db_stress --detect_filter_construct_corruption=true`
- Manually smoke-tested: manually corrupted the filter construction in some db level tests with basic PUT and background flush. As expected, the error did get returned to users in subsequent PUT and Flush status.
Reviewed By: pdillinger
Differential Revision: D33746928
Pulled By: hx235
fbshipit-source-id: cb056426be5a7debc1cd16f23bc250f36a08ca57
Summary:
Apparently setting total_order_seek=true for DB::Get was
intended to allow accurate read semantics if the current prefix
extractor doesn't match what was used to generate SST files on
disk. But since prefix_extractor was made a mutable option in 5.14.0, we
have been able to detect this case and provide the correct semantics
regardless of the total_order_seek option. Since that time, the option
has only made Get() slower in a reasonably common case: prefix_extractor
unchanged and whole_key_filtering=false.
So this change primarily removes unnecessary effect of
total_order_seek on Get. Also cleans up some related comments.
Also adds a -total_order_seek option to db_bench and canonicalizes
handling of ReadOptions in db_bench so that command line options have
the expected association with library features. (There is potential
for change in regression test behavior, but the old behavior is likely
indefensible, or some other inconsistency would need to be fixed.)
TODO in follow-up work: there should be no reason for Get() to depend on
current prefix extractor at all.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9427
Test Plan:
Unit tests updated.
Performance (using db_bench update)
Create DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12 -whole_key_filtering=0`
Test with and without `-total_order_seek` on `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=readrandom -num=10000000 -duration=40 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Before this change, total_order_seek=false: 25188 ops/sec
Before this change, total_order_seek=true: 1222 ops/sec (~20x slower)
After this change, total_order_seek=false: 24570 ops/sec
After this change, total_order_seek=true: 25012 ops/sec (indistinguishable)
Reviewed By: siying
Differential Revision: D33753458
Pulled By: pdillinger
fbshipit-source-id: bf892f34907a5e407d9c40bd4d42f0adbcbe0014
Summary:
MemTable::MultiGet was not considering range tombstones before
querying Bloom filter. This means range tombstones would be skipped for
keys (or prefixes) with no other entries in the memtable. This could cause
old values for a key (in SST files) to still show up until the range tombstone
covering it has been flushed.
This is fixed by essentially disabling the memtable Bloom filter when there
are any range tombstones. (This could be better optimized in the future, but
good enough for now.)
Did some other cleanup/optimization in the same code to (more than) offset
the cost of checking on range tombstones in more cases. There is now
notable improvement when memtable_whole_key_filtering and prefix_extractor
are used together (unusual), and this makes MultiGet closer to the Get
implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9453
Test Plan:
new unit test added. Added memtable Bloom to crash test.
Performance testing
--------------------
Build WAL-only DB (recovers to memtable):
```
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=1000000 -write_buffer_size=250000000
```
Query test command, to maximize sensitivity to the changed code:
```
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=multireadrandom -num=10000000 -write_buffer_size=250000000 -memtable_bloom_size_ratio=0.015 -multiread_batched -batch_size=24 -threads=8 -memtable_whole_key_filtering=$MWKF -prefix_size=$PXS
```
(Note -num here is 10x larger for mostly memtable misses)
Before & after run simultaneously, average over 10 iterations per data point, ops/sec.
MWKF=0 PXS=0 (Bloom disabled)
Before: 5724844
After: 6722066
MWKF=0 PXS=7 (prefixes hardly unique; Bloom not useful)
Before: 9981319
After: 10237990
MWKF=0 PXS=8 (prefixes unique; Bloom useful)
Before: 12081715
After: 12117603
MWKF=1 PXS=0 (whole key Bloom useful)
Before: 11944354
After: 12096085
MWKF=1 PXS=7 (whole key Bloom useful in new version; prefixes not useful in old version)
Before: 9444299
After: 11826029
MWKF=1 PXS=7 (whole key Bloom useful in new version; prefixes useful in old version)
Before: 11784465
After: 11778591
Only in this last case is the 'before' *slightly* faster, perhaps because hashing prefixes is slightly faster than hashing whole keys. Otherwise, 'after' is faster.
Reviewed By: ajkr
Differential Revision: D33805025
Pulled By: pdillinger
fbshipit-source-id: 597523cae4f4eafdf6ae6bb2bc6cb46f83b017bf
Summary:
**Context:**
Inside `BlockBasedTableBuilder::WriteRawBlock`, there are multiple places that change local variables `io_s` and `s` while
depend on them. This PR attempts to clarify the relevant logics so that it's easier to read and add places of changing these local variables later (like https://github.com/facebook/rocksdb/pull/9342.) without changing the current behavior.
**Summary:**
- Shorten the lifetime of local var `io_s` and `s` as much as possible to avoid if-else branches by early return
**Test**
- Reasoned against original behavior to verify new changes do not break existing behaviors.
- Rely on CI tests since we are not changing current behavior.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9393
Reviewed By: pdillinger
Differential Revision: D33626095
Pulled By: hx235
fbshipit-source-id: 6184d1e1d85d2650d16617c449971988d062ed3f
Summary:
Right now, when error happens in block based table reader, we still call index_builder->Finish(), this causes one assertion in one stress test:
db_stress: table/block_based/index_builder.cc:202: virtual rocksdb::Status rocksdb::PartitionedIndexBuilder::Finish(rocksdb::IndexBuilder::IndexBlocks*, const rocksdb::BlockHandle&): Assertion `sub_index_builder_ == nullptr' failed.
This unlikely causes any corruption as we would finally abandon the file, but the code is confusing and it is hard to understand what would happen. Changing the behavior.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9426
Test Plan: Run existing tests
Reviewed By: pdillinger
Differential Revision: D33751929
fbshipit-source-id: 3c916b9444a4171010fc53df40496570bef5ae7a
Summary:
Fixes a major performance regression in 6.26, where
extra CPU is spent in SliceTransform::AsString when reads involve
a prefix_extractor (Get, MultiGet, Seek). Common case performance
is now better than 6.25.
This change creates a "fast path" for verifying that the current prefix
extractor is unchanged and compatible with what was used to
generate a table file. This fast path detects the common case by
pointer comparison on the current prefix_extractor and a "known
good" prefix extractor (if applicable) that is saved at the time the
table reader is opened. The "known good" prefix extractor is saved
as another shared_ptr copy (in an existing field, however) to ensure
the pointer is not recycled.
When the prefix_extractor has changed to a different instance but
same compatible configuration (rare, odd), performance is still a
regression compared to 6.25, but this is likely acceptable because
of the oddity of such a case. The performance of incompatible
prefix_extractor is essentially unchanged.
Also fixed a minor case (ForwardIterator) where a prefix_extractor
could be used via a raw pointer after being freed as a shared_ptr,
if replaced via SetOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407
Test Plan:
## Performance
Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load)
v6.26: 4833 vs. 6698 (<- major regression!)
v6.27: 4737 vs. 6397 (still)
New: 6704 vs. 6461 (better than baseline in common case)
Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible)
Changed prefix size (no usable filter) in new: 787 vs. 5927
Changed prefix size (no usable filter) in new & baseline: 773 vs. 784
Reviewed By: mrambacher
Differential Revision: D33677812
Pulled By: pdillinger
fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76
Summary:
The old block-based filter has been deprecated for years, but
this makes that more clear by marking the functions specific to it and
logging a warning when the feature is used.
It is deprecated because of performance. In that old design, you have to
binary search through the full SST index before a bloom filter query, which
is much more expensive than a bloom query itself.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9403
Test Plan:
Used db_bench with and without -use_block_based_filter,
running at the same time
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom,readrandom -num=10000000 -duration=20 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0
No significant difference in construction time but 3x slower readrandom
with -use_block_based_filter:
readrandom : 100.517 micros/op 9948 ops/sec; 1.1 MB/s
vs.
readrandom : 33.368 micros/op 29968 ops/sec; 3.3 MB/s
Also saw deprecation message (just once) in LOG only with
-use_block_based_filter
Reviewed By: ajkr
Differential Revision: D33673202
Pulled By: pdillinger
fbshipit-source-id: 99f6f0eff619408d9e5f7ef546954ed0be6c7a5b
Summary:
In order to support old-style regex function registration, restored the original "Register<T>(string, Factory)" method using regular expressions. The PatternEntry methods were left in place but renamed to AddFactory. The goal is to allow for the deprecation of the original regex Registry method in an upcoming release.
Added modes to the PatternEntry kMatchZeroOrMore and kMatchAtLeastOne to match * or +, respectively (kMatchAtLeastOne was the original behavior).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9362
Reviewed By: pdillinger
Differential Revision: D33432562
Pulled By: mrambacher
fbshipit-source-id: ed88ab3f9a2ad0d525c7bd1692873f9bb3209d02
Summary:
Note: rebase on and merge after https://github.com/facebook/rocksdb/pull/9349, as part of https://github.com/facebook/rocksdb/pull/9342
**Context:**
https://github.com/facebook/rocksdb/pull/9073 charged the hash entries' memory in block cache with `CacheReservationHandle`. However, in the edge case where Ribbon Filter falls back to Bloom Filter and swaps its hash entries to the embedded bloom filter object, the handles associated with those entries are not swapped and thus not released as soon as those entries are cleared during Bloom Filter's finish process.
Although this is a minor issue since RocksDB internal calls `FilterBitsBuilder->Reset()` right after `FilterBitsBuilder->Finish()` on the main path, which releases all the cache reservation related to both the Ribbon Filter and its embedded Bloom Filter, it still worths this fix to avoid confusion.
**Summary:**
- Swapped the `CacheReservationHandle` associated with the hash entries on Ribbon Filter's fallback
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9345
Test Plan: - Added a unit test to verify the number of cache reservation after clearing hash entries, which failed before the change and now succeeds
Reviewed By: pdillinger
Differential Revision: D33377225
Pulled By: hx235
fbshipit-source-id: 7487f4c40dfb6ee7928232021f93ef2c5329cffa
Summary:
Added new ObjectLibrary::Entry classes to replace/reduce the use of Regex. For simple factories that only do name matching, there are "StringEntry" and "AltStringEntry" classes. For classes that use some semblance of regular expressions, there is a PatternEntry class that can match a name and prefixes. There is also a class for Customizable::IndividualId format matches.
Added tests for the new derivative classes and got all unit tests to pass.
Resolves https://github.com/facebook/rocksdb/issues/9225.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9264
Reviewed By: pdillinger
Differential Revision: D33062001
Pulled By: mrambacher
fbshipit-source-id: c2d2143bd2d38bdf522705c8280c35381b135c03
Summary:
Fixes a problem where the iterator for metadata was being treated as a non-user key when in fact it was a user key. This led to a problem where the property keys could not be searched for correctly.
The main exposure of this problem was that the HashIndexReader could not get the "prefixes" property correctly, resulting in the failure of retrieval/creation of the BlockPrefixIndex.
Added BlockBasedTableTest.SeekMetaBlocks test to validate this condition.
Fixing this condition exposed two other tests (SeekWithPrefixLongerThanKey, MultiGetPrefixFilter) that passed incorrectly previously and now failed. Updated those two tests to pass. Not sure if the tests are functionally correct/still appropriate, but made them pass...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8692
Reviewed By: riversand963
Differential Revision: D33119539
Pulled By: mrambacher
fbshipit-source-id: 658969fe9265f73dc184dab97cc3f4eaed2d881a
Summary:
- Make MemoryAllocator and its implementations into a Customizable class.
- Added a "DefaultMemoryAllocator" which uses new and delete
- Added a "CountedMemoryAllocator" that counts the number of allocs and free
- Updated the existing tests to use these new allocators
- Changed the memkind allocator test into a generic test that can test the various allocators.
- Added tests for creating all of the allocators
- Added tests to verify/create the JemallocNodumpAllocator using its options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8980
Reviewed By: zhichao-cao
Differential Revision: D32990403
Pulled By: mrambacher
fbshipit-source-id: 6fdfe8218c10dd8dfef34344a08201be1fa95c76
Summary:
This change standardizes on a new 16-byte cache key format for
block cache (incl compressed and secondary) and persistent cache (but
not table cache and row cache).
The goal is a really fast cache key with practically ideal stability and
uniqueness properties without external dependencies (e.g. from FileSystem).
A fixed key size of 16 bytes should enable future optimizations to the
concurrent hash table for block cache, which is a heavy CPU user /
bottleneck, but there appears to be measurable performance improvement
even with no changes to LRUCache.
This change replaces a lot of disjointed and ugly code handling cache
keys with calls to a simple, clean new internal API (cache_key.h).
(Preserving the old cache key logic under an option would be very ugly
and likely negate the performance gain of the new approach. Complete
replacement carries some inherent risk, but I think that's acceptable
with sufficient analysis and testing.)
The scheme for encoding new cache keys is complicated but explained
in cache_key.cc.
Also: EndianSwapValue is moved to math.h to be next to other bit
operations. (Explains some new include "math.h".) ReverseBits operation
added and unit tests added to hash_test for both.
Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126
Test Plan:
### Basic correctness
Several tests needed updates to work with the new functionality, mostly
because we are no longer relying on filesystem for stable cache keys
so table builders & readers need more context info to agree on cache
keys. This functionality is so core, a huge number of existing tests
exercise the cache key functionality.
### Performance
Create db with
`TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters`
And test performance with
`TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4`
using DEBUG_LEVEL=0 and simultaneous before & after runs.
Before ops/sec, avg over 100 runs: 121924
After ops/sec, avg over 100 runs: 125385 (+2.8%)
### Collision probability
I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity
over many months, by making some pessimistic simplifying assumptions:
* Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys)
* All of every file is cached for its entire lifetime
We use a simple table with skewed address assignment and replacement on address collision
to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output
with `./cache_bench -stress_cache_key -sck_keep_bits=40`:
```
Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day
Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached)
```
These come from default settings of 2.5M files per day of 32 MB each, and
`-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of
the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation
is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality.
More default assumptions, relatively pessimistic:
* 100 DBs in same process (doesn't matter much)
* Re-open DB in same process (new session ID related to old session ID) on average
every 100 files generated
* Restart process (all new session IDs unrelated to old) 24 times per day
After enough data, we get a result at the end:
```
(keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected)
```
If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data:
```
(keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected)
(keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected)
```
The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases:
```
197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected)
```
I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data.
Reviewed By: zhichao-cao
Differential Revision: D33171746
Pulled By: pdillinger
fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f
Summary:
I'm working on a new format_version=6 to support context
checksum (https://github.com/facebook/rocksdb/issues/9058) and this includes much of the refactoring and test
updates to support that change.
Test coverage data and manual inspection agree on dead code in
block_based_table_reader.cc (removed).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9240
Test Plan:
tests enhanced to cover more cases etc.
Extreme case performance testing indicates small % regression in fillseq (w/ compaction), though CPU profile etc. doesn't suggest any explanation. There is enhanced correctness checking in Footer::DecodeFrom, but this should be negligible.
TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=1 --disable_wal={false,true}
(Each is ops/s averaged over 50 runs, run simultaneously with competing configuration for load fairness)
Before w/ wal: 454512
After w/ wal: 444820 (-2.1%)
Before w/o wal: 1004560
After w/o wal: 998897 (-0.6%)
Since this doesn't modify WAL code, one would expect real effects to be larger in w/o wal case.
This regression will be corrected in a follow-up PR.
Reviewed By: ajkr
Differential Revision: D32813769
Pulled By: pdillinger
fbshipit-source-id: 444a244eabf3825cd329b7d1b150cddce320862f
Summary:
When table_options.prepopulate_block_cache is set to
BlockBasedTableOptions::PrepopulateBlockCache::kFlushOnly and
table_options.partition_filters is also set true, then there is
segmentation failure when top level filter is fetched because its
entered with wrong type in cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9263
Test Plan:
Updated unit tests;
Ran db_stress: make crash_test -j32
Reviewed By: pdillinger
Differential Revision: D32936566
Pulled By: akankshamahajan15
fbshipit-source-id: 8bd79e53830d3e3c1bb79787e1ffbc3cb46d4426
Summary:
**Context:**
Searching `TableProperties::properties_offsets` across the codebase reveals that internally it is only used to find the external SST file's global seqno offeset. Therefore we can narrow it down and replace this map property with a uint64_t property `external_sst_file_global_seqno_offset` to save memory usage related to table properties.
Note:
- See PR comments for discussion about potential impact on existing external usage of `TableProperties::properties_offsets`
- See PR comments for discussion on keeping external SST file global seqno's offset VS using a simple flag indicating seqno's existence.
**Summary:**
- Replaced `TableProperties::properties_offsets` with `TableProperties::external_sst_file_global_seqno_offset`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9212
Test Plan: - Relied on existing tests should be sufficient since `TableProperties::properties_offsets` existed before and should already be tested.
Reviewed By: ajkr
Differential Revision: D32665941
Pulled By: hx235
fbshipit-source-id: 718e44617346dc4f3b1276ee953e61c196277795
Summary:
The patch adds a new BlobDB configuration option `blob_compaction_readahead_size`
that can be used to enable prefetching data from blob files during compaction.
This is important when using storage with higher latencies like HDDs or remote filesystems.
If enabled, prefetching is used for all cases when blobs are read during compaction,
namely garbage collection, compaction filters (when the existing value has to be read from
a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187
Test Plan: Ran `make check` and the stress/crash test.
Reviewed By: riversand963
Differential Revision: D32565512
Pulled By: ltamasi
fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d
Summary:
A bug in https://github.com/facebook/rocksdb/issues/9163 can cause checksum verification to fail if
parsing a properties block fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9189
Test Plan:
check_format_compatible.sh (never quite works locally but
this particular case seems fixed using variants of SHORT_TEST=1).
And added new unit test case.
Reviewed By: ajkr
Differential Revision: D32574626
Pulled By: pdillinger
fbshipit-source-id: 6fa5c8595737b71a3c3d011a52daf6d6c08715d7
Summary:
Track each SST's timestamp information as user properties https://github.com/facebook/rocksdb/issues/8959
Rockdb has supported user-defined timestamp feature. Application can specify a timestamp
when writing each k-v pair. When data flush from memory to disk file called SST files.
Each SST files consist of multiple data blocks and several metadata blocks. Among the metadata
blocks, there is one called Properties block that tracks some pre-defined properties of this SST file.
This PR is for collecting the properties of min and max timestamps of all keys in the file. With those
properties the SST file is more convenient to tell whether the keys in the SST have timestamps or not.
The changes involved are as follows:
1) Add a class TimestampTablePropertiesCollector to collect min/max timestamp when add keys to table,
The way TimestampTablePropertiesCollector use to compare timestamp of key should defined by
user by implementing the Comparator::CompareTimestamp function in the user defined comparator.
2) Add corresponding unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9093
Reviewed By: ltamasi
Differential Revision: D32406927
Pulled By: riversand963
fbshipit-source-id: 25922971b7e67bacf4d53a1fb67c4c5ddaa61573
Summary:
* Checksums are now checked on meta blocks unless specifically
suppressed or not applicable (e.g. plain table). (Was other way around.)
This means a number of cases that were not checking checksums now are,
including direct read TableProperties in Version::GetTableProperties
(fixed in meta_blocks ReadTableProperties), reading any block from
PersistentCache (fixed in BlockFetcher), read TableProperties in
SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open,
maybe more.
* For that to work, I moved the global_seqno+TableProperties checksum
logic to the shared table/ code, because that is used by many utilies
such as SstFileDumper.
* Also for that to work, we have to know when we're dealing with a block
that has a checksum (trailer), so added that capability to Footer based
on magic number, and from there BlockFetcher.
* Knowledge of trailer presence has also fixed a problem where other
table formats were reading blocks including bytes for a non-existant
trailer--and awkwardly kind-of not using them, e.g. no shared code
checking checksums. (BlockFetcher compression type was populated
incorrectly.) Now we only read what is needed.
* Minimized code duplication and differing/incompatible/awkward
abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block
without parsing block handle)
* Moved some meta block handling code from table_properties*.*
* Moved some code specific to block-based table from shared table/ code
to BlockBasedTable class. The checksum stuff means we can't completely
separate it, but things that don't need to be in shared table/ code
should not be.
* Use unique_ptr rather than raw ptr in more places. (Note: you can
std::move from unique_ptr to shared_ptr.)
Without enhancements to GetPropertiesOfAllTablesTest (see below),
net reduction of roughly 100 lines of code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163
Test Plan:
existing tests and
* Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that
checksums are now checked on direct read of table properties by TableCache
(new test would fail before this change)
* Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test
putting table properties under old meta name
* Also generally enhanced that same test to actually test what it was
supposed to be testing already, by kicking things out of table cache when
we don't want them there.
Reviewed By: ajkr, mrambacher
Differential Revision: D32514757
Pulled By: pdillinger
fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
Summary:
Note: This PR is the 4th part of a bigger PR stack (https://github.com/facebook/rocksdb/pull/9073) and will rebase/merge only after the first three PRs (https://github.com/facebook/rocksdb/pull/9070, https://github.com/facebook/rocksdb/pull/9071, https://github.com/facebook/rocksdb/pull/9130) merge.
**Context:**
Similar to https://github.com/facebook/rocksdb/pull/8428, this PR is to track memory usage during (new) Bloom Filter (i.e,FastLocalBloom) and Ribbon Filter (i.e, Ribbon128) construction, moving toward the goal of [single global memory limit using block cache capacity](https://github.com/facebook/rocksdb/wiki/Projects-Being-Developed#improving-memory-efficiency). It also constrains the size of the banding portion of Ribbon Filter during construction by falling back to Bloom Filter if that banding is, at some point, larger than the available space in the cache under `LRUCacheOptions::strict_capacity_limit=true`.
The option to turn on this feature is `BlockBasedTableOptions::reserve_table_builder_memory = true` which by default is set to `false`. We [decided](https://github.com/facebook/rocksdb/pull/9073#discussion_r741548409) not to have separate option for separate memory user in table building therefore their memory accounting are all bundled under one general option.
**Summary:**
- Reserved/released cache for creation/destruction of three main memory users with the passed-in `FilterBuildingContext::cache_res_mgr` during filter construction:
- hash entries (i.e`hash_entries`.size(), we bucket-charge hash entries during insertion for performance),
- banding (Ribbon Filter only, `bytes_coeff_rows` +`bytes_result_rows` + `bytes_backtrack`),
- final filter (i.e, `mutable_buf`'s size).
- Implementation details: in order to use `CacheReservationManager::CacheReservationHandle` to account final filter's memory, we have to store the `CacheReservationManager` object and `CacheReservationHandle` for final filter in `XXPH3BitsFilterBuilder` as well as explicitly delete the filter bits builder when done with the final filter in block based table.
- Added option fo run `filter_bench` with this memory reservation feature
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9073
Test Plan:
- Added new tests in `db_bloom_filter_test` to verify filter construction peak cache reservation under combination of `BlockBasedTable::Rep::FilterType` (e.g, `kFullFilter`, `kPartitionedFilter`), `BloomFilterPolicy::Mode`(e.g, `kFastLocalBloom`, `kStandard128Ribbon`, `kDeprecatedBlock`) and `BlockBasedTableOptions::reserve_table_builder_memory`
- To address the concern for slow test: tests with memory reservation under `kFullFilter` + `kStandard128Ribbon` and `kPartitionedFilter` take around **3000 - 6000 ms** and others take around **1500 - 2000 ms**, in total adding **20000 - 25000 ms** to the test suit running locally
- Added new test in `bloom_test` to verify Ribbon Filter fallback on large banding in FullFilter
- Added test in `filter_bench` to verify that this feature does not significantly slow down Bloom/Ribbon Filter construction speed. Local result averaged over **20** run as below:
- FastLocalBloom
- baseline `./filter_bench -impl=2 -quick -runs 20 | grep 'Build avg'`:
- **Build avg ns/key: 29.56295** (DEBUG_LEVEL=1), **29.98153** (DEBUG_LEVEL=0)
- new feature (expected to be similar as above)`./filter_bench -impl=2 -quick -runs 20 -reserve_table_builder_memory=true | grep 'Build avg'`:
- **Build avg ns/key: 30.99046** (DEBUG_LEVEL=1), **30.48867** (DEBUG_LEVEL=0)
- new feature of RibbonFilter with fallback (expected to be similar as above) `./filter_bench -impl=2 -quick -runs 20 -reserve_table_builder_memory=true -strict_capacity_limit=true | grep 'Build avg'` :
- **Build avg ns/key: 31.146975** (DEBUG_LEVEL=1), **30.08165** (DEBUG_LEVEL=0)
- Ribbon128
- baseline `./filter_bench -impl=3 -quick -runs 20 | grep 'Build avg'`:
- **Build avg ns/key: 129.17585** (DEBUG_LEVEL=1), **130.5225** (DEBUG_LEVEL=0)
- new feature (expected to be similar as above) `./filter_bench -impl=3 -quick -runs 20 -reserve_table_builder_memory=true | grep 'Build avg' `:
- **Build avg ns/key: 131.61645** (DEBUG_LEVEL=1), **132.98075** (DEBUG_LEVEL=0)
- new feature of RibbonFilter with fallback (expected to be a lot faster than above due to fallback) `./filter_bench -impl=3 -quick -runs 20 -reserve_table_builder_memory=true -strict_capacity_limit=true | grep 'Build avg'` :
- **Build avg ns/key: 52.032965** (DEBUG_LEVEL=1), **52.597825** (DEBUG_LEVEL=0)
- And the warning message of `"Cache reservation for Ribbon filter banding failed due to cache full"` is indeed logged to console.
Reviewed By: pdillinger
Differential Revision: D31991348
Pulled By: hx235
fbshipit-source-id: 9336b2c60f44d530063da518ceaf56dac5f9df8e
Summary:
We have three layers of block cache that often use the same key
but map to different physical data:
* BlockBasedTableOptions::block_cache
* BlockBasedTableOptions::block_cache_compressed
* BlockBasedTableOptions::persistent_cache
If any two of these happen to share an underlying implementation and key
space (insertion into one shows up in another), then memory safety is
broken. The simplest case is block_cache == block_cache_compressed.
(Credit mrambacher for asking about this case in a review.)
With this change, we explicitly check for overlap and preemptively and
safely fail with a Status code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9172
Test Plan: test added. Crashes without new check
Reviewed By: anand1976
Differential Revision: D32465659
Pulled By: pdillinger
fbshipit-source-id: 3876b45b6dce6167e5a7a642725ddc86b96f8e40
Summary:
RocksDB does auto-readahead for iterators on noticing more than two sequential reads for a table file if user doesn't provide readahead_size. The readahead starts at 8KB and doubles on every additional read up to max_auto_readahead_size. However at each level, if iterator moves over next file, readahead_size starts again from 8KB.
This PR introduces a new ReadOption "adaptive_readahead" which when set true will maintain readahead_size at each level. So when iterator moves from one file to another, new file's readahead_size will continue from previous file's readahead_size instead of scratch. However if reads are not sequential it will fall back to 8KB (default) with no prefetching for that block.
1. If block is found in cache but it was eligible for prefetch (block wasn't in Rocksdb's prefetch buffer), readahead_size will decrease by 8KB.
2. It maintains readahead_size for L1 - Ln levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9056
Test Plan:
Added new unit tests
Ran db_bench for "readseq, seekrandom, seekrandomwhilewriting, readrandom" with --adaptive_readahead=true and there was no regression if new feature is enabled.
Reviewed By: anand1976
Differential Revision: D31773640
Pulled By: akankshamahajan15
fbshipit-source-id: 7332d16258b846ae5cea773009195a5af58f8f98
Summary:
Allow compaction_job_test, db_io_failure_test, dbformat_test, deletefile_test, and fault_injection_test to use a custom Env object. Also move ```RegisterCustomObjects``` declaration to a header file to simplify things.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9087
Test Plan: Run manually using "buck test rocksdb/src:compaction_job_test_fbcode" etc.
Reviewed By: riversand963
Differential Revision: D32007222
Pulled By: anand1976
fbshipit-source-id: 99af58559e25bf61563dfa95dc46e31fa7375792
Summary:
Note: This PR is the 1st part of a bigger PR stack (https://github.com/facebook/rocksdb/pull/9073).
Context:
Previously, the payload (i.e, filter data) within `BlockBasedTableBuilder::Rep::FilterBlockBuilder` object is not deallocated until `BlockBasedTableBuilder` is deallocated, despite it is no longer useful after its related `filter_content` being written.
- Transferred the payload (i.e, the filter data) out of `BlockBasedTableBuilder::Rep::FilterBlockBuilder` object
- For PartitionedFilter:
- Unified `filters` and `filter_gc` lists into one `std::deque<FilterEntry> filters` by adding a new field `last_filter_entry_key` and storing the `std::unique_ptr filter_data` with the `Slice filter` in the same entry
- Reset `last_filter_data` in the case where `filters` is empty, which should be as by then we would've finish using all the `Slice filter`
- Deallocated the payload by going out of scope as soon as we're done with using the `filter_content` associated with the payload
- This is an internal interface change at the level of `FilterBlockBuilder::Finish()`, which leads to touching the inherited interface in `BlockBasedFilterBlockBuilder`. But for that, the payload transferring is ignored.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9070
Test Plan: - The main focus is to catch segment fault error during `FilterBlockBuilder::Finish()` and `BlockBasedTableBuilder::Finish()` and interface mismatch. Relying on existing CI tests is enough as `assert(false)` was temporarily added to verify the new logic of transferring ownership indeed run
Reviewed By: pdillinger
Differential Revision: D31884933
Pulled By: hx235
fbshipit-source-id: f73ecfbea13788d4fc058013ace27230110b52f4
Summary:
To prepare for adding checksum to footer and "context aware"
checksums. This also brings closely related code much closer together.
Recently added `BlockBasedTableBuilder::ComputeBlockTrailer` for testing
is made obsolete in the refactoring, as testing the checksums can happen
at a lower level of abstraction.
Also now checking for unrecognized checksum type on reading footer,
rather than later on use.
Also removed an obsolete function delcaration.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9113
Test Plan:
existing tests worked before refactoring to remove
`ComputeBlockTrailer`. And then refactored+improved tests using it.
Reviewed By: mrambacher
Differential Revision: D32090149
Pulled By: pdillinger
fbshipit-source-id: 2879da683c1498ea85a3b70dace9b6d9f6b47b6e
Summary:
Summary/Context:
- Renamed `cache_rev_mng` to `compression_dict_buffer_cache_res_mgr`
- It is to distinguish with other potential `cache_res_mgr` in `BlockBasedTableBuilder` and to use correct short-hand for the words "reservation", "manager"
- Added `table_options.block_cache == nullptr` in additional to `table_options.no_block_cache == true` to be conditions where we don't create a `CacheReservationManager`
- Theoretically `table_options.no_block_cache == true` is equivalent to `table_options.block_cache == nullptr` by API. But since segment fault will be generated by passing `nullptr` into `CacheReservationManager`'s constructor, it does not hurt to directly verify `table_options.block_cache != nullptr` before passing in
- Renamed `is_cache_full` to `exceeds_global_block_cache_limit`
- It is to hide implementation detail of cache reservation and to emphasize on the concept/design intent of caping memory within global block cache limit
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9032
Test Plan: - Passing existing tests
Reviewed By: ajkr
Differential Revision: D32005807
Pulled By: hx235
fbshipit-source-id: 619fd17bb924199de3db5924d8ab7dae53b1efa2
Summary:
XXH3 - latest hash function that is extremely fast on large
data, easily faster than crc32c on most any x86_64 hardware. In
integrating this hash function, I have handled the compression type byte
in a non-standard way to avoid using the streaming API (extra data
movement and active code size because of hash function complexity). This
approach got a thumbs-up from Yann Collet.
Existing functionality change:
* reject bad ChecksumType in options with InvalidArgument
This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is
likely to be handled through different configuration than ChecksumType.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069
Test Plan:
tests updated, and substantially expanded. Unit tests now check
that we don't accidentally change the values generated by the checksum
algorithms ("schema test") and that we properly handle
invalid/unrecognized checksum types in options or in file footer.
DBTestBase::ChangeOptions (etc.) updated from two to one configuration
changing from default CRC32c ChecksumType. The point of this test code
is to detect possible interactions among features, and the likelihood of
some bad interaction being detected by including configurations other
than XXH3 and CRC32c--and then not detected by stress/crash test--is
extremely low.
Stress/crash test also updated (manual run long enough to see it accepts
new checksum type). db_bench also updated for microbenchmarking
checksums.
### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3
crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op)
xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op)
xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op)
xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op)
crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op)
xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op)
xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op)
xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op)
crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op)
xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op)
xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op)
xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op)
As you can see, especially once warmed up, xxh3 is fastest.
### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
Test
for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done
Results (ops/sec)
for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done
results-0 252118 # kNoChecksum
results-1 251588 # kCRC32c
results-2 251863 # kxxHash
results-3 252016 # kxxHash64
results-4 252038 # kXXH3
Reviewed By: mrambacher
Differential Revision: D31905249
Pulled By: pdillinger
fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
Summary:
Somewhat confusingly, index and filter partition blocks are
never owned by table readers, even with
cache_index_and_filter_blocks=false. They still go into block cache
(possibly pinned by table reader) if there is a block cache. If no block
cache, they are only loaded transiently on demand.
This PR primarily clarifies the options APIs and some internal code
comments.
Also, this closes a hypothetical data corruption vulnerability where
some but not all index partitions are pinned. I haven't been able to
reproduce a case where it can happen (the failure seems to propagate
to abort table open) but it's worth patching nonetheless.
Fixes https://github.com/facebook/rocksdb/issues/8979
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9068
Test Plan:
existing tests :-/ I could cover the new code using sync
points, but then I'd have to very carefully relax my `assert(false)`
Reviewed By: ajkr
Differential Revision: D31898284
Pulled By: pdillinger
fbshipit-source-id: f2511a7d3a36bc04b627935d8e6cfea6422f98be
Summary:
Currently, if Secondary Cache is provided to the lru cache, it is used by default. We add CacheTier to advanced_options.h to describe the cache tier we used. Add a `lowest_used_cache_tier` option to `DBOptions` (immutable) and pass it to BlockBasedTableReader to decide if secondary cache will be used or not. By default it is `CacheTier::kNonVolatileTier`, which means, we always use both block cache (kVolatileTier) and secondary cache (kNonVolatileTier). By set it to `CacheTier::kVolatileTier`, the DB will not use the secondary cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9050
Test Plan: added new tests
Reviewed By: anand1976
Differential Revision: D31744769
Pulled By: zhichao-cao
fbshipit-source-id: a0575ebd23e1c6dfcfc2b4c8578764e73b15bce6
Summary:
... by bypassing tracking of last_key in BlockBuilder when
last_key is already known (for BlockBasedTableBuilder::data_block).
I tried extracting a base class of BlockBuilder without the last_key
tracking at all, but that became complicated by NewFlushBlockPolicy() in
the public API referencing BlockBuilder, which would need to be the base
class, and I don't want to replace nearly all the internal references to
BlockBuilder.
Possible follow-up:
* Investigate / consider using AddWithLastKey in more places
This improvement should stack with https://github.com/facebook/rocksdb/issues/9039
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9040
Test Plan:
TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=50000000
Compiled with DEBUG_LEVEL=0
Test vs. control runs simulaneous for better accuracy, units = ops/sec
Run 1: 278929 vs. 267799 (+4.2%)
Run 2: 281836 vs. 267432 (+5.4%)
Run 3: 278279 vs. 270454 (+2.9%)
(This benchmark is chosen to have detectable signal-to-noise, not to
represent expected improvement percent on real workloads.)
Reviewed By: mrambacher
Differential Revision: D31706033
Pulled By: pdillinger
fbshipit-source-id: 8a50fe6fefdd67b6d7665ffa687bbdcf5ad0d5ec
Summary:
* New public header unique_id.h and function GetUniqueIdFromTableProperties
which computes a universally unique identifier based on table properties
of table files from recent RocksDB versions.
* Generation of DB session IDs is refactored so that they are
guaranteed unique in the lifetime of a process running RocksDB.
(SemiStructuredUniqueIdGen, new test included.) Along with file numbers,
this enables SST unique IDs to be guaranteed unique among SSTs generated
in a single process, and "better than random" between processes.
See https://github.com/pdillinger/unique_id
* In addition to public API producing 'external' unique IDs, there is a function
for producing 'internal' unique IDs, with functions for converting between the
two. In short, the external ID is "safe" for things people might do with it, and
the internal ID enables more "power user" features for the future. Specifically,
the external ID goes through a hashing layer so that any subset of bits in the
external ID can be used as a hash of the full ID, while also preserving
uniqueness guarantees in the first 128 bits (bijective both on first 128 bits
and on full 192 bits).
Intended follow-up:
* Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into
the third 64-bit value of the unique ID.)
* Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990
Test Plan:
Unit tests added, and checking of unique ids in stress test.
NOTE in stress test we do not generate nearly enough files to thoroughly
stress uniqueness, but the test trims off pieces of the ID to check for
uniqueness so that we can infer (with some assumptions) stronger
properties in the aggregate.
Reviewed By: zhichao-cao, mrambacher
Differential Revision: D31582865
Pulled By: pdillinger
fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
Summary:
Primarily, this change reserves space in the std::string for building
the next block once a block is finished, using `block_size` as
reservation size. Note: also tried reusing same std::string in the
common "unbuffered" path but that showed no benefit or regression.
Secondarily, this slightly reduces the work in resetting `restarts_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9039
Test Plan:
TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=50000000
Compiled with DEBUG_LEVEL=0
Test vs. control runs simulaneous for better accuracy, units = ops/sec
Run 1, Primary change only: 292697 vs. 280267 (+4.4%)
Run 2, Primary change only: 288763 vs. 279621 (+3.3%)
Run 1, Secondary change only: 260065 vs. 254232 (+2.3%)
Run 2, Secondary change only: 275925 vs. 272248 (+1.4%)
Run 1, Both changes: 284890 vs. 270372 (+5.3%)
Run 2, Both changes: 263511 vs. 258188 (+2.0%)
Reviewed By: zhichao-cao
Differential Revision: D31701253
Pulled By: pdillinger
fbshipit-source-id: 7e40810afbb98e6b6446955e77bda59e69b19ffd
Summary:
I was looking at https://github.com/facebook/rocksdb/issues/2636 and got very confused that `MergingIterator::AddIterator()` is populating `min_heap_` with dangling pointers. There is justification in the comments that `min_heap_` will be cleared before it's used, but it'd be cleaner to not populate it with dangling pointers in the first place. Also made similar change in the constructor for consistency, although the pointers there would not be dangling, just unused.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8975
Test Plan: rely on existing tests
Reviewed By: pdillinger, hx235
Differential Revision: D31273767
Pulled By: ajkr
fbshipit-source-id: 127ca9dd1f82f77f55dd0c3f19511de3282fc229
Summary:
Background: Cache warming up will cause potential read performance degradation due to reading blocks from storage to the block cache. Since in production, the workload and access pattern to a certain DB is stable, it is a potential solution to dump out the blocks belonging to a certain DB to persist storage (e.g., to a file) and bulk-load the blocks to Secondary cache before the DB is relaunched. For example, when migrating a DB form host A to host B, it will take a short period of time, the access pattern to blocks in the block cache will not change much. It is efficient to dump out the blocks of certain DB, migrate to the destination host and insert them to the Secondary cache before we relaunch the DB.
Design: we introduce the interface of CacheDumpWriter and CacheDumpRead for user to store the blocks dumped out from block cache. RocksDB will encode all the information and send the string to the writer. User can implement their own writer it they want. CacheDumper and CacheLoad are introduced to save the blocks and load the blocks respectively.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8912
Test Plan: add new tests to lru_cache_test and pass make check.
Reviewed By: pdillinger
Differential Revision: D31452871
Pulled By: zhichao-cao
fbshipit-source-id: 11ab4f5d03e383f476947116361d54188d36ec48
Summary:
There were three implementations of VectorIterator (util/vector_iterator, test_util/testutil.h and LoggingForwardVectorIterator). Merged them into one class to increase code coverage/testing and reduce duplication.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8901
Reviewed By: pdillinger
Differential Revision: D31022673
Pulled By: mrambacher
fbshipit-source-id: 8e3acbd2dfd60b4df609d02cc72846de2389d531
Summary:
This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead.
Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing.
Hopefully, this sort of code hygiene cleanup will speed up the builds...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930
Reviewed By: pdillinger
Differential Revision: D31142788
Pulled By: mrambacher
fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d
Summary:
Context:
Exposing the level of the sst file (i.e, table) where it is created in `TablePropertiesCollectorFactory::Context` allows users of `TablePropertiesCollectorFactory` to customize some implementation details of `TablePropertiesCollectorFactory` and `TablePropertiesCollector` based on the level of creation. For example, `TablePropertiesCollector::NeedCompact()` can return different values based on level of creation.
- Declared an extra field `level_at_creation` in `TablePropertiesCollectorFactory::Context`
- Allowed `level_at_creation` to be passed in as an argument in `IntTblPropCollectorFactory::CreateIntTblPropCollector()` and `UserKeyTablePropertiesCollectorFactory::CreateIntTblPropCollector()`, the latter of which is an internal wrapper of user's passed-in `TablePropertiesCollectorFactory::CreateTablePropertiesCollector()` used in table-building process
- Called `IntTblPropCollectorFactory::CreateIntTblPropCollector()` with `level_at_creation` passed into both `BlockBasedTableBuilder` and `PlainTableBuilder`
- `PlainTableBuilder` previously did not capture `level_at_creation` from `TableBuilderOptions` in `PlainTableFactory`. In order for it to call the method with this parameter, this PR also made `PlainTableBuilder` capture `level_at_creation` as a required parameter
- Called `IntTblPropCollectorFactory::CreateIntTblPropCollector()` with `level_at_creation` its overridden functions in its derived classes, including `RegularKeysStartWithAFactory::CreateIntTblPropCollector()` in `table_properties_collector_test.cc`, `SstFileWriterPropertiesCollectorFactory::CreateIntTblPropCollector()` in `sst_file_writer_collectors.h`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8919
Test Plan:
- Passed the added assertion for `context.level_at_creation`
- Passed existing tests
- Run `Make` to make sure adding a required parameter to `PlainTableBuilder`'s constructor does not break anything
Reviewed By: anand1976
Differential Revision: D30951729
Pulled By: hx235
fbshipit-source-id: c4a0173b0d9344a4cf47e1b987d759c1c73cb474
Summary:
The origin error message of uncompressing block is confusing, which may result from either build support or data corruption.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8934
Reviewed By: ltamasi
Differential Revision: D31112588
Pulled By: pdillinger
fbshipit-source-id: 1cbf2d4fbcb0ef376cf942246d06f48cb603f852
