Summary:
when I changed std::vector<std::string, std::string> to std::string to
store key/value pairs in builder, I missed the handling for kDeletion
type. As a result, value_size_ can be wrong if the first add key is for
deletion.
The is captured by ./cuckoo_table_db_test
Test Plan:
./cuckoo_table_db_test
./cuckoo_table_reader_test
./cuckoo_table_builder_test
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24045
Summary:
cuckoo table iterator creation is quite expensive since it needs to load
all data and sort them. After compaction, RocksDB creates a new iterator
of the new file to make sure it is in good state. That makes the DB
creation quite slow. Delay the iterator db sort to the seek time to
speed it up.
Test Plan: db_bench
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23775
Summary:
builder currently buffers all key value pairs as a vector of
pair<string, string>. That is too much due to std::string
overhead. It wasn't able to fit 1B key/values (12bytes total) in 100GB
of ram. Switch to use a plain string to store the key/value sequence and
use only 12GB of ram as a result.
Test Plan: db_bench
Reviewers: igor, sdong, yhchiang
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23763
Summary:
When creating a new iterator, instead of storing mapping from key to
bucket id for sorting, store only bucket id and read key from mmap file
based on the id. This reduces from 20 bytes per entry to only 4 bytes.
Test Plan: db_bench
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23757
Summary:
Using module to calculate hash makes lookup ~8% slower. But it has its
benefit: file size is more predictable, more space enffient
Test Plan: db_bench
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23691
Summary:
Add a CompactedDBImpl that will enabled when calling OpenForReadOnly()
and the DB only has one level (>0) of files. As a performan comparison,
CuckooTable performs 2.1M/s with CompactedDBImpl vs. 1.78M/s with
ReadOnlyDBImpl.
Test Plan: db_bench
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23553
Summary:
It was commented out in D22545 by accident. Keep the option in
ImmutableOptions for now. I can make it dynamic in
https://reviews.facebook.net/D23349
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23865
Summary:
MurmurHash becomes expensive when we do millions Get() a second in one
thread. Add this option to allow the first hash function to use identity
function as hash function. It results in QPS increase from 3.7M/s to
~4.3M/s. I did not observe improvement for end to end RocksDB
performance. This may be caused by other bottlenecks that I will address
in a separate diff.
Test Plan:
```
[ljin@dev1964 rocksdb] ./cuckoo_table_reader_test --enable_perf --file_dir=/dev/shm --write --identity_as_first_hash=0
==== Test CuckooReaderTest.WhenKeyExists
==== Test CuckooReaderTest.WhenKeyExistsWithUint64Comparator
==== Test CuckooReaderTest.CheckIterator
==== Test CuckooReaderTest.CheckIteratorUint64
==== Test CuckooReaderTest.WhenKeyNotFound
==== Test CuckooReaderTest.TestReadPerformance
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.272us (3.7 Mqps) with batch size of 0, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.138us (7.2 Mqps) with batch size of 10, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.142us (7.1 Mqps) with batch size of 25, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.142us (7.0 Mqps) with batch size of 50, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.144us (6.9 Mqps) with batch size of 100, # of found keys 125829120
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.201us (5.0 Mqps) with batch size of 0, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.121us (8.3 Mqps) with batch size of 10, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.123us (8.1 Mqps) with batch size of 25, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.121us (8.3 Mqps) with batch size of 50, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.112us (8.9 Mqps) with batch size of 100, # of found keys 104857600
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.251us (4.0 Mqps) with batch size of 0, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.107us (9.4 Mqps) with batch size of 10, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.099us (10.1 Mqps) with batch size of 25, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.100us (10.0 Mqps) with batch size of 50, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.116us (8.6 Mqps) with batch size of 100, # of found keys 83886080
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.189us (5.3 Mqps) with batch size of 0, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.095us (10.5 Mqps) with batch size of 10, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.096us (10.4 Mqps) with batch size of 25, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.098us (10.2 Mqps) with batch size of 50, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.105us (9.5 Mqps) with batch size of 100, # of found keys 73400320
[ljin@dev1964 rocksdb] ./cuckoo_table_reader_test --enable_perf --file_dir=/dev/shm --write --identity_as_first_hash=1
==== Test CuckooReaderTest.WhenKeyExists
==== Test CuckooReaderTest.WhenKeyExistsWithUint64Comparator
==== Test CuckooReaderTest.CheckIterator
==== Test CuckooReaderTest.CheckIteratorUint64
==== Test CuckooReaderTest.WhenKeyNotFound
==== Test CuckooReaderTest.TestReadPerformance
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.230us (4.3 Mqps) with batch size of 0, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.086us (11.7 Mqps) with batch size of 10, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.088us (11.3 Mqps) with batch size of 25, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.083us (12.1 Mqps) with batch size of 50, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.083us (12.1 Mqps) with batch size of 100, # of found keys 125829120
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.159us (6.3 Mqps) with batch size of 0, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.078us (12.8 Mqps) with batch size of 10, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.080us (12.6 Mqps) with batch size of 25, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.080us (12.5 Mqps) with batch size of 50, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.082us (12.2 Mqps) with batch size of 100, # of found keys 104857600
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.154us (6.5 Mqps) with batch size of 0, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.077us (13.0 Mqps) with batch size of 10, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.077us (12.9 Mqps) with batch size of 25, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.078us (12.8 Mqps) with batch size of 50, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.079us (12.6 Mqps) with batch size of 100, # of found keys 83886080
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.218us (4.6 Mqps) with batch size of 0, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.083us (12.0 Mqps) with batch size of 10, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.085us (11.7 Mqps) with batch size of 25, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.086us (11.6 Mqps) with batch size of 50, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.078us (12.8 Mqps) with batch size of 100, # of found keys 73400320
```
Reviewers: sdong, igor, yhchiang
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23451
Summary:
This is continuing the work done by 27b22f13a3
It's just cleaning up some unnecessary constructors. The most important change is removing Block::Block(const BlockContents& contents) constructor. It was only used from the unit test.
Test Plan: compiles
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23547
This replaces a mishmash of pointers in the Block and BlockContents classes with
std::unique_ptr. It also changes the semantics of BlockContents to be limited to
use as a constructor parameter for Block objects, as it owns any block buffers
handed to it.
Summary:
This is to avoid cutting file prematurely and resulting file size to be
half of specified.
Test Plan: db_bench
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23541
Summary: as title
Test Plan:
make all check
I will think a way to set up stress test for this
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23055
Summary: This work on my compiler, but it turns out some compilers don't implicitly add constness, see: https://github.com/facebook/rocksdb/issues/284. This diff adds constness explicitly.
Test Plan: still compiles
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23409
Summary:
See t5106397.
Also, few more changes:
1. in unit tests, the assumption is that writes will be dropped when there is no space left on device. I changed the wording around it.
2. InvalidArgument() errors are only when user-provided arguments are invalid. When the file is corrupted, we need to return Status::Corruption
Test Plan: make check
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23145
Summary: removed reference to options in WriteBatch and DBImpl::Get()
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23049
Summary:
1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file.
2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter.
3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type.
4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h.
5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc
Benchmark: base commit 1d23b5c470
Command:
db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1
Read QPS increase for about 30% from 2230002 to 2991411.
Test Plan:
make all check
valgrind db_test
db_stress --use_block_based_filter = 0
./auto_sanity_test.sh
Reviewers: igor, yhchiang, ljin, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20979
Summary: Fix compaction bug in Cuckoo Table Builder. Use kvs_.size() instead of num_entries in FileSize() method. Also added tests.
Test Plan:
make check all
Also ran db_bench to generate multiple files.
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22743
Summary:
Simply code by removing code path which does not use Arena
from NewInternalIterator
Test Plan:
make all check
make valgrind_check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22395
Summary:
As a preparation to support updating some options dynamically, I'd like
to first introduce ImmutableOptions, which is a subset of Options that
cannot be changed during the course of a DB lifetime without restart.
ColumnFamily will keep both Options and ImmutableOptions. Any component
below ColumnFamily should only take ImmutableOptions in their
constructor. Other options should be taken from APIs, which will be
allowed to adjust dynamically.
I am yet to make changes to memtable and other related classes to take
ImmutableOptions in their ctor. That can be done in a seprate diff as
this one is already pretty big.
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D22545
1, const qualifiers on return types make no sense and will trigger a compile warning: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
2, class HistogramImpl has virtual functions and thus should have a virtual destructor
3, with some toolchain, the macro __STDC_FORMAT_MACROS is predefined and thus should be checked before define
Change-Id: I69747a03bfae88671bfbb2637c80d17600159c99
Signed-off-by: liuhuahang <liuhuahang@zerus.co>
Summary: It only covers Open() with default column family right now
Test Plan: make release
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22467
This eliminates the need to remember to call PERF_TIMER_STOP when a section has
been timed. This allows more useful design with the perf timers and enables
possible return value optimizations. Simplistic example:
class Foo {
public:
Foo(int v) : m_v(v);
private:
int m_v;
}
Foo makeFrobbedFoo(int *errno)
{
*errno = 0;
return Foo();
}
Foo bar(int *errno)
{
PERF_TIMER_GUARD(some_timer);
return makeFrobbedFoo(errno);
}
int main(int argc, char[] argv)
{
Foo f;
int errno;
f = bar(&errno);
if (errno)
return -1;
return 0;
}
After bar() is called, perf_context.some_timer would be incremented as if
Stop(&perf_context.some_timer) was called at the end, and the compiler is still
able to produce optimizations on the return value from makeFrobbedFoo() through
to main().
Summary: gcc on our dev boxes is not happy about __attribute__((unused))
Test Plan: compiles now
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22707
Summary: We need to set contbuild for this :)
Test Plan: compiles
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22701
Summary:
Use inlined hash functions instead of function pointer. Make number of buckets a power of two and use bitwise and instead of mod.
After these changes, we get almost 50% improvement in performance.
Results:
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.231us (4.3 Mqps) with batch size of 0
Time taken per op is 0.229us (4.4 Mqps) with batch size of 0
Time taken per op is 0.185us (5.4 Mqps) with batch size of 0
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.108us (9.3 Mqps) with batch size of 10
Time taken per op is 0.100us (10.0 Mqps) with batch size of 10
Time taken per op is 0.103us (9.7 Mqps) with batch size of 10
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.101us (9.9 Mqps) with batch size of 25
Time taken per op is 0.098us (10.2 Mqps) with batch size of 25
Time taken per op is 0.097us (10.3 Mqps) with batch size of 25
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.100us (10.0 Mqps) with batch size of 50
Time taken per op is 0.097us (10.3 Mqps) with batch size of 50
Time taken per op is 0.097us (10.3 Mqps) with batch size of 50
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.102us (9.8 Mqps) with batch size of 100
Time taken per op is 0.098us (10.2 Mqps) with batch size of 100
Time taken per op is 0.115us (8.7 Mqps) with batch size of 100
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.201us (5.0 Mqps) with batch size of 0
Time taken per op is 0.155us (6.5 Mqps) with batch size of 0
Time taken per op is 0.152us (6.6 Mqps) with batch size of 0
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.089us (11.3 Mqps) with batch size of 10
Time taken per op is 0.084us (11.9 Mqps) with batch size of 10
Time taken per op is 0.086us (11.6 Mqps) with batch size of 10
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.087us (11.5 Mqps) with batch size of 25
Time taken per op is 0.085us (11.7 Mqps) with batch size of 25
Time taken per op is 0.093us (10.8 Mqps) with batch size of 25
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.094us (10.6 Mqps) with batch size of 50
Time taken per op is 0.094us (10.7 Mqps) with batch size of 50
Time taken per op is 0.093us (10.8 Mqps) with batch size of 50
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.092us (10.9 Mqps) with batch size of 100
Time taken per op is 0.089us (11.2 Mqps) with batch size of 100
Time taken per op is 0.088us (11.3 Mqps) with batch size of 100
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.154us (6.5 Mqps) with batch size of 0
Time taken per op is 0.168us (6.0 Mqps) with batch size of 0
Time taken per op is 0.190us (5.3 Mqps) with batch size of 0
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.081us (12.4 Mqps) with batch size of 10
Time taken per op is 0.077us (13.0 Mqps) with batch size of 10
Time taken per op is 0.083us (12.1 Mqps) with batch size of 10
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.077us (13.0 Mqps) with batch size of 25
Time taken per op is 0.073us (13.7 Mqps) with batch size of 25
Time taken per op is 0.073us (13.7 Mqps) with batch size of 25
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.076us (13.1 Mqps) with batch size of 50
Time taken per op is 0.072us (13.8 Mqps) with batch size of 50
Time taken per op is 0.072us (13.8 Mqps) with batch size of 50
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.077us (13.0 Mqps) with batch size of 100
Time taken per op is 0.074us (13.6 Mqps) with batch size of 100
Time taken per op is 0.073us (13.6 Mqps) with batch size of 100
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.190us (5.3 Mqps) with batch size of 0
Time taken per op is 0.186us (5.4 Mqps) with batch size of 0
Time taken per op is 0.184us (5.4 Mqps) with batch size of 0
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.079us (12.7 Mqps) with batch size of 10
Time taken per op is 0.070us (14.2 Mqps) with batch size of 10
Time taken per op is 0.072us (14.0 Mqps) with batch size of 10
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.080us (12.5 Mqps) with batch size of 25
Time taken per op is 0.072us (14.0 Mqps) with batch size of 25
Time taken per op is 0.071us (14.1 Mqps) with batch size of 25
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.082us (12.1 Mqps) with batch size of 50
Time taken per op is 0.071us (14.1 Mqps) with batch size of 50
Time taken per op is 0.073us (13.6 Mqps) with batch size of 50
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.080us (12.5 Mqps) with batch size of 100
Time taken per op is 0.077us (13.0 Mqps) with batch size of 100
Time taken per op is 0.078us (12.8 Mqps) with batch size of 100
Test Plan:
make check all
make valgrind_check
make asan_check
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22539
Summary:
When reading from kBlockCacheTier, ForwardIterator's internal child iterators
may end up in the incomplete state (read was unable to complete without doing
disk I/O). `ForwardIterator::status()` will correctly report that; however, the
iterator may be stuck in that state until all sub-iterators are rebuilt:
* `NeedToSeekImmutable()` may return false even if some sub-iterators are
incomplete
* one of the child iterators may be an empty iterator without any state other
that the kIncomplete status (created using `NewErrorIterator()`); seeking on
any such iterator has no effect -- we need to construct it again
Akin to rebuilding iterators after a superversion bump, this diff makes forward
iterator reset all incomplete child iterators when `Seek()` or `Next()` are
called.
Test Plan: TEST_TMPDIR=/dev/shm/rocksdbtest ROCKSDB_TESTS=TailingIterator ./db_test
Reviewers: igor, sdong, ljin
Reviewed By: ljin
Subscribers: lovro, march, leveldb
Differential Revision: https://reviews.facebook.net/D22575
Summary:
1. remove class InternalFilterPolicy in db/dbformat.h
2. Transformation from internal key to user key is done in filter_block.cc
3. This is a preparation for patch D20979
Test Plan:
make all check
valgrind ./db_test
Reviewers: igor, yhchiang, ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22509
Summary: This implements a cache friendly version of Cuckoo Hash in which, in case of collission, we try to insert in next few locations. The size of the neighborhood to check is taken as an input parameter in builder and stored in the table.
Test Plan:
make check all
cuckoo_table_{db,reader,builder}_test
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22455
Summary:
- New Uint64 comparator
- Modify Reader and Builder to take custom user comparators instead of bytewise comparator
- Modify logic for choosing unused user key in builder
- Modify iterator logic in reader
- test changes
Test Plan:
cuckoo_table_{builder,reader,db}_test
make check all
Reviewers: ljin, sdong
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D22377
Summary: Add a virtual function in table factory that will print table options
Test Plan: make release
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22149
Summary:
I will move compression related options in a separate diff since this
diff is already pretty lengthy.
I guess I will also need to change JNI accordingly :(
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21915
Summary:
- Implement Prepare method
- Rewrite performance tests in cuckoo_table_reader_test to write new file only if one doesn't already exist.
- Add performance tests for batch lookup along with prefetching.
Test Plan:
./cuckoo_table_reader_test --enable_perf
Results (We get better results if we used int64 comparator instead of string comparator (TBD in future diffs)):
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.208us (4.8 Mqps) with batch size of 0
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.182us (5.5 Mqps) with batch size of 10
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.161us (6.2 Mqps) with batch size of 25
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.161us (6.2 Mqps) with batch size of 50
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.163us (6.1 Mqps) with batch size of 100
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.252us (4.0 Mqps) with batch size of 0
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.192us (5.2 Mqps) with batch size of 10
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.195us (5.1 Mqps) with batch size of 25
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.191us (5.2 Mqps) with batch size of 50
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.194us (5.1 Mqps) with batch size of 100
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.228us (4.4 Mqps) with batch size of 0
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.185us (5.4 Mqps) with batch size of 10
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.186us (5.4 Mqps) with batch size of 25
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.189us (5.3 Mqps) with batch size of 50
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.188us (5.3 Mqps) with batch size of 100
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.325us (3.1 Mqps) with batch size of 0
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.196us (5.1 Mqps) with batch size of 10
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.199us (5.0 Mqps) with batch size of 25
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.196us (5.1 Mqps) with batch size of 50
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.209us (4.8 Mqps) with batch size of 100
Reviewers: sdong, yhchiang, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22167
Summary:
Currently, PlainTable must use mmap_reads. When PlainTable is used but
allow_mmap_reads is not set, rocksdb will fail in flush.
This diff improve Options sanitization and add MmapReadRequired() to
TableFactory.
Test Plan:
export ROCKSDB_TESTS=PlainTableOptionsSanitizeTest
make db_test -j32
./db_test
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: you, leveldb
Differential Revision: https://reviews.facebook.net/D21939
Summary: Make table_reader_bench cover all the three table formats.
Test Plan: Run it using three options
Reviewers: radheshyamb, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22137
Summary:
Avoid retrying to read property block from a table when it does not exist
in updating stats for compensating deletion entries.
In addition, ReadTableProperties() now returns Status::NotFound instead
of Status::Corruption when table properties does not exist in the file.
Test Plan:
make db_test -j32
export ROCKSDB_TESTS=CompactionDeleteionTrigger
./db_test
Reviewers: ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21867
Summary:
Contains the following changes:
- Implementation of cuckoo_table_factory
- Adding cuckoo table into AdaptiveTableFactory
- Adding cuckoo_table_db_test, similar to lines of plain_table_db_test
- Minor fixes to Reader: When a key is found in the table, return the key found instead of the search key.
- Minor fixes to Builder: Add table properties that are required by Version::UpdateTemporaryStats() during Get operation. Don't define curr_node as a reference variable as the memory locations may get reassigned during tree.push_back operation, leading to invalid memory access.
Test Plan:
cuckoo_table_reader_test --enable_perf
cuckoo_table_builder_test
cuckoo_table_db_test
make check all
make valgrind_check
make asan_check
Reviewers: sdong, igor, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21219
* Script for building the unity.cc file via Makefile
* Unity executable Makefile target for testing builds
* Source code changes to fix compilation of unity build
Summary:
Add a DB Property "rocksdb.estimate-table-readers-mem" to return estimated memory usage by all loaded table readers, other than allocated from block cache.
Refactor the property codes to allow getting property from a version, with DB mutex not acquired.
Test Plan: Add several checks of this new property in existing codes for various cases.
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: xjin, igor, leveldb
Differential Revision: https://reviews.facebook.net/D20733
Summary:
- Maintain a list of key-value pairs as vectors during Add operation.
- Start building hash table only when Finish() is called.
- This approach takes more time and space but avoids taking file_size, key and value lengths.
- Rewrote cuckoo_table_builder_test
I did not know about IterKey while writing this diff. I shall change places where IterKey could be used instead of std::string tomorrow. Please review rest of the logic.
Test Plan:
cuckoo_table_reader_test --enable_perf
cuckoo_table_builder_test
valgrind_check
asan_check
Reviewers: sdong, igor, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20907
Summary:
- Reads key-value pairs from file and builds an in-memory index of key-to-bucket id map in sorted order of key.
- Assumes bytewise comparator for sorting keys.
- Test changes
Test Plan:
cuckoo_table_reader_test --enable_perf
valgrind_check
asan_check
Reviewers: yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb, igor
Differential Revision: https://reviews.facebook.net/D20721
Summary: port::MemoryBarrier() is not recommended to use outside of port. Remove it.
Test Plan: run table_reader_bench
Reviewers: ljin, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21075
Summary:
1. logging when create and delete manifest file
2. fix formating in table/format.cc
Test Plan:
make all check
run db_bench, track the LOG file.
Reviewers: ljin, yhchiang, igor, yufei.zhu, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21009
Summary: Made some small changes to fix the broken mac build
Test Plan: make check all in both linux and mac. All tests pass.
Reviewers: sdong, igor, ljin, yhchiang
Reviewed By: ljin, yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20895
Summary:
When compression is enabled, and blocksize is not too big, use the
space in stack to hold bytes read from block.
Bencmark:
base version: commit 8f09d53fd1
malloc: 1.30% -> 0.98%
free: 1.49% -> 1.07%
Test Plan:
make all check
Reviewers: ljin, yhchiang, dhruba, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20679
Summary:
Define Block::Iter to be an independent class to be used by block_based_table_reader
When creating data and index iterator, update an existing iterator rather than new one
Thus malloc and free could be reduced
Benchmark,
Base:
commit 76286ee67e
commands:
--db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=2621440 --use_hash_search=1 --block_size=1024 --block_restart_interval=1 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1
malloc: 3.30% -> 1.42%
free: 3.59%->1.61%
Test Plan:
make all check
run db_stress
valgrind ./db_test ./table_test
Reviewers: ljin, yhchiang, dhruba, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20655
Summary:
- Copy the key and value to in-memory hash table during Add operation. Also modified cuckoo_table_reader_test to use this.
- Store only the user_key in in-memory hash table if it is last level file.
- Handle Carryover while chosing unused key in Finish() method in case unused key was never found before Finish() call.
Test Plan:
cuckoo_table_reader_test --enable_perf
cuckoo_table_builder_test
valgrind_check
asan_check
Reviewers: sdong, yhchiang, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20715
Summary:
Make StatisticsImpl being able to forward stats to provided statistics
implementation. The main purpose is to allow us to collect internal
stats in the future even when user supplies custom statistics
implementation. It avoids intrumenting 2 sets of stats collection code.
One immediate use case is tuning advisor, which needs to collect some
internal stats, users may not be interested.
Test Plan:
ran db_bench and see stats show up at the end of run
Will run make all check since some tests rely on statistics
Reviewers: yhchiang, sdong, igor
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20145
Summary:
In block based table's hash index checking, when looking for a key that doesn't exist, there is a high chance that a false block is returned because of hash bucket conflicts. In this revision, another check is done to filter out some of those cases: comparing previous key of the block boundary to see whether the target block is what we are looking for.
In a favored test setting (bloom filter disabled, 8 L0 files), I saw about 80% improvements. In a non-favored test setting (bloom filter enabled, files are all in L1, files are all cached), I see the performance penalty is less than 3%.
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: ljin
Subscribers: wuj, leveldb, zagfox, yhchiang
Differential Revision: https://reviews.facebook.net/D20595
Summary:
Contains:
- Implementation of TableReader based on Cuckoo Hashing
- Unittests for CuckooTableReader
- Performance test for TableReader
Test Plan:
make cuckoo_table_reader_test
./cuckoo_table_reader_test
make valgrind_check
make asan_check
Reviewers: yhchiang, sdong, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20511
Summary:
Contains the following changes in CuckooTableBuilder:
- Take an extra parameter in constructor to identify last level file.
- Implement a better way to identify if a bucket has been inserted into the tree already during BFS search.
- Minor typos
Test Plan:
make cuckoo_table_builder
./cuckoo_table_builder
make valgrind_check
Reviewers: sdong, igor, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20445
Summary:
Modify a functioin TrimAppend in dbformat.h: IterKey. Write a test for it in dbformat_test
Use IterKey in block::Iter to replace std::string to reduce malloc.
Evaluate it using perf record.
malloc: 4.26% -> 2.91%
free: 3.61% -> 3.08%
Test Plan:
make all check
./valgrind db_test dbformat_test
Reviewers: ljin, haobo, yhchiang, dhruba, igor, sdong
Reviewed By: sdong
Differential Revision: https://reviews.facebook.net/D20433
Summary: Fixes some memory leaks in cuckoo_builder_test.cc. This also fixed broken valgrind_check tests
Test Plan:
make valgrind_check
./cuckoo_builder_test
Currently running make check all. I shall update once it is done.
Reviewers: ljin, sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20385
Summary:
Fixed the following compile error.
./table/cuckoo_table_builder.h:72:22: error: private field 'key_length_' is not used [-Werror,-Wunused-private-field]
const unsigned int key_length_;
^
1 error generated.
Test Plan: make
Reviewers: sdong, ljin, radheshyamb, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20349
Summary:
Adding option to save PlainTable index and bloom filter in SST file.
If there is no bloom block and/or index block, PlainTableReader builds
new ones. Otherwise PlainTableReader just use these blocks.
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19527
Summary:
Since we have a lot of options for PlainTable, add a struct PlainTableOptions
to manage them
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20175
Summary:
Seems like NewTotalOrderPlainTableFactory is useless and is semantically incorrect.
Total order mode indicator is prefix_extractor == nullptr,
but NewTotalOrderPlainTableFactory doesn't set it to be nullptr. That's why some tests
in plain_table_db_tests is incorrect.
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19587
Summary:
ReadInternalKey() will assign correct value anyway. Initialize it to
true to suppress compiler error reported
https://github.com/facebook/rocksdb/issues/186
Test Plan: I cannot reproduce it but this is obvious
Reviewers: sdong, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19467
Summary:
Bloomfilter and hashskiplist's buckets_ allocated by memtable's arena
DynamicBloom: pass arena via constructor, allocate space in SetTotalBits
HashSkipListRep: allocate space of buckets_ using arena.
do not delete it in deconstructor because arena would take care of it.
Several test files are changed.
Test Plan:
make all check
Reviewers: ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, dhruba
Differential Revision: https://reviews.facebook.net/D19335
Summary:
As discussed in our internal group, we don't get much use of seek compaction at the moment, while it's making code more complicated and slower in some cases.
This diff removes seek compaction and (hopefully) all code that was introduced to support seek compaction.
There is one test case that relied on didIO information. I'll try to find another way to implement it.
Test Plan: make check
Reviewers: sdong, haobo, yhchiang, ljin, dhruba
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19161
Summary: Currently, RocksDB returns error if a db written with prefix hash index, is later opened without providing a prefix extractor. This is uncessarily harsh. Without a prefix extractor, we could always fallback to the normal binary index.
Test Plan: unit test, also manually veried LOG that fallback did occur.
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19191
Summary: fix a bug in D19047, which caused DBTest.RecoverDuringMemtableCompaction to fail.
Test Plan: unit test
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19155
Summary:
Add a encoding feature of PlainTable to encode PlainTable's keys to save some bytes for the same prefixes.
The data format is documented in table/plain_table_factory.h
Test Plan: Add unit test coverage in plain_table_db_test
Reviewers: yhchiang, igor, dhruba, ljin, haobo
Reviewed By: haobo
Subscribers: nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D18735
Summary:
Currently, the in-memory hash index of blockbased table uses a precise hash map to track the prefix to block range mapping. In some use cases, especially when prefix itself is big, the memory overhead becomes a problem. This diff introduces a fixed hash bucket array that does not store the prefix and allows prefix collision, which is similar to the plaintable hash index, in order to reduce the memory consumption.
Just a quick draft, still testing and refining.
Test Plan: unit test and shadow testing
Reviewers: dhruba, kailiu, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19047
Summary:
This is minor, but if we put the writing talbe factory as the third parameter, when we add a new table format, we'll have a situation:
1) block based factory
2) plain table factory
3) output factory
4) new format factory
I think it makes more sense to have output as the first parameter.
Also, fixed a NewAdaptiveTableFactory() call in unit test
Test Plan: unit test
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19119
Summary: The new table factory is used if users want to convert a DB from one table format to the other. A user can use this table to open a DB written using one table format and write new files to another table format.
Test Plan: add a unit test
Reviewers: haobo, igor
Reviewed By: igor
Subscribers: dhruba, ljin, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D19017
Summary: as title
Test Plan:
db_bench
the initial result is very promising. I will post results of complete
runs
Reviewers: dhruba, haobo, sdong, igor
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18867
Summary: In BlockBasedTable::PrefixMayMatch() we calculate prefix even if bloom is not config. Move the check before
Test Plan: make all check
Reviewers: igor, ljin
Reviewed By: ljin
Subscribers: wuj, leveldb, haobo, yhchiang, dhruba
Differential Revision: https://reviews.facebook.net/D18993
Summary:
Clean PlainTableReader's data structures:
(1) inline bloom_ (in order to do this, change DynamicBloom to allow lazy initialization)
(2) remove some variables only used when initialization from the class
(3) put variables not used in normal read code paths to the end of the class and reference prefix_extractor directly
(4) make Options a reference.
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: ljin
Subscribers: igor, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18891
Summary: This is a temporary solution to a issue that we have with compression libraries. See task #4453446.
Test Plan: make check doesn't complain :)
Reviewers: haobo, ljin, yhchiang, dhruba, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18975
Summary:
In this patch, try to allocate the whole iterator tree starting from DBIter from an arena
1. ArenaWrappedDBIter is created when serves as the entry point of an iterator tree, with an arena in it.
2. Add an option to create iterator from arena for following iterators: DBIter, MergingIterator, MemtableIterator, all mem table's iterators, all table reader's iterators and two level iterator.
3. MergeIteratorBuilder is created to incrementally build the tree of internal iterators. It is passed to mem table list and version set and add iterators to it.
Limitations:
(1) Only DB::NewIterator() without tailing uses the arena. Other cases, including readonly DB and compactions are still from malloc
(2) Two level iterator itself is allocated in arena, but not iterators inside it.
Test Plan: make all check
Reviewers: ljin, haobo
Reviewed By: haobo
Subscribers: leveldb, dhruba, yhchiang, igor
Differential Revision: https://reviews.facebook.net/D18513
Summary:
Forward iterator puts everything together in a flat structure instead of
a hierarchy of nested iterators. this should simplify the code and
provide better performance. It also enables more optimization since all
information are accessiable in one place.
Init evaluation shows about 6% improvement
Test Plan: db_test and db_bench
Reviewers: dhruba, igor, tnovak, sdong, haobo
Reviewed By: haobo
Subscribers: sdong, leveldb
Differential Revision: https://reviews.facebook.net/D18795
Summary:
Materialize the hash index to avoid the soaring cpu/flash usage
when initializing the database.
Test Plan: existing unit tests passed
Reviewers: sdong, haobo
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18339
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
Summary:
Use autovector in MergingIterator so that if there are 4 or less child iterators in it, iterator wrappers are inline, which is more likely to be cache friendly.
Based on one test run with a shadow traffic of one product, it reduces CPU of MergingIterator::Seek() by half.
Test Plan: make all check
Reviewers: haobo, yhchiang, igor, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18531
Summary:
TLB page allocation errors are now logged to info logs, instead of stderr.
In order to do that, mem table rep's factory functions take a info logger now.
Test Plan: make all check
Reviewers: haobo, igor, yhchiang
Reviewed By: yhchiang
CC: leveldb, yhchiang, dhruba
Differential Revision: https://reviews.facebook.net/D18471
Summary: PlainTableFactory::PlainTableFactory() now has Huge TLB page feature turned on by default. Although it is not a public API (which we always turn the feature off now), our unit tests, like db_test sometimes uses it directly, which causes wrong coverage of codes. This patch fix it to allow unit tests to run with the correct setting
Test Plan: Run db_test and make sure this feature is not on any more.
Reviewers: igor, haobo
Reviewed By: igor
CC: yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18483
Summary: Add an option to allocate a piece of memory from huge page TLB. Add options to trigger it in dynamic bloom, plain table indexes andhash linked list hash table.
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: nkg-, dhruba, leveldb, igor, yhchiang
Differential Revision: https://reviews.facebook.net/D18357
Summary:
As a follow-up diff for https://reviews.facebook.net/D17805, add
optimization to check PrefixMayMatch on Seek()
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17853
Summary:
also add an override option total_order_iteration if you want to use full
iterator with prefix_extractor
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D17805
Summary:
This is a temp solution to expose index sizes to users from PlainTableReader before we persistent them to files.
In this patch, the memory consumption of indexes used by PlainTableReader will be reported as two user defined properties, so that users can monitor them.
Test Plan:
Add a unit test.
make all check`
Reviewers: haobo, ljin
Reviewed By: haobo
CC: nkg-, yhchiang, igor, ljin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18195
Summary: Added benchmark functionality on the lines of folly/Benchmark.h
Test Plan: Added unit tests
Reviewers: igor, haobo, sdong, ljin, yhchiang, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17973
Summary:
A recent commit e37dd216f9 makes sure hash index can be used when reading existing files. This patch uses another way to achieve the approach:
(1) Currently, always writing kBinarySearch to files, despite of BlockBasedTableOptions.IndexType setting.
(2) When reading a file, read out the field, and make sure it is kBinarySearch, while always use index type by users.
The reason for doing it is, to reserve kHashSearch property on disk to future. If now we write out binary index for both of kHashSearch and kBinarySearch. We have to use a new flag in the future for hash index on disk, otherwise compatibility would break. Also, we want the real index type and type shown in properties block to be consistent.
Test Plan: make all check
Reviewers: haobo, kailiu
Reviewed By: kailiu
CC: igor, ljin, yhchiang, xjin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18009
Summary:
With the recent changes, there is no need to check the property block about the index block type.
If user want to use it, they don't really need any disk format change; everything happens in the fly.
Also another team encountered an error while reading the index type from properties.
Test Plan:
ran all the tests
Reviewers: sdong
CC:
Task ID: #
Blame Rev:
Summary:
From 2.6 to 2.7, property block name is renamed from rocksdb.stats to rocksdb.properties. Older properties were not able to be loaded. In 2.8, we seem to have added some logic that uses property block without checking null pointers, which create segment faults.
In this patch, we fix it by:
(1) try rocksdb.stats if rocksdb.properties is not found
(2) add some null checking before consuming rep->table_properties
Test Plan: make sure a file generated in 2.7 couldn't be opened now can be opened.
Reviewers: haobo, igor, yhchiang
Reviewed By: igor
CC: ljin, xjin, dhruba, kailiu, leveldb
Differential Revision: https://reviews.facebook.net/D17961
Summary:
Introducing RocksDBLite! Removes all the non-essential features and reduces the binary size. This effort should help our adoption on mobile.
Binary size when compiling for IOS (`TARGET_OS=IOS m static_lib`) is down to 9MB from 15MB (without stripping)
Test Plan: compiles :)
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17835
Summary:
I was wrong about the "index builder", right now since we create index
by scanning both whole table and index, there is not need to preserve
the whole key as the index key.
I switch back to original way index which is both space efficient and
able to supprot in-fly construction of hash index.
IN this patch, I made minimal change since I'm not sure if we still need
the "pluggable index builder", under current circumstance it is of no use
and kind of over-engineered. But I'm not sure if we can still exploit its
usefulness in the future; otherwise I think I can just burn them with great
vengeance.
Test Plan: unit tests
Reviewers: sdong, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17745
Summary: Based on previous patches, this diff eventually provides the end-to-end mechanism for users to specify the hash-index.
Test Plan: Wrote several new unit tests.
Reviewers: sdong, haobo, dhruba
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16539
Summary: Compiling for iOS has by default turned on -Wmissing-prototypes, which causes rocksdb to fail compiling. This diff turns on -Wmissing-prototypes in our compile options and cleans up all functions with missing prototypes.
Test Plan: compiles
Reviewers: dhruba, haobo, ljin, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17649
Summary: Our profile shows that in one of the applications, 5% of the CPU costs of PlainTableBuilder::Add() are spent on std::string stacks. By this simple change, we avoid this global reusable string. Also, we avoid another call of file appending, which probably gives another 2%.
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D17601
Summary: This will allow us to disable them completely for iOS or for better performance
Test Plan: will run make all check
Reviewers: igor, haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17511
Summary:
Move PlainTableIterator's copied key from std::string local buffer to avoid paying the extra costs in std::string related to sharing. Reuse the same buffer class in DbIter. Move the class to dbformat.h.
This patch improves iterator performance significantly. Running this benchmark:
./table_reader_bench --num_keys2=17 --iterator --plain_table --time_unit=nanosecond
The average latency is improved to about 750 nanoseconds from 1100 nanoseconds.
Test Plan:
Add a unit test.
make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D17547
Summary:
In total order mode, iterator's seek() shouldn't check total order.
Also some cleaning up about checking null for shared pointers. I don't know the behavior before it.
This bug was reported by @igor.
Test Plan: test plain_table_db_test
Reviewers: ljin, haobo, igor
Reviewed By: igor
CC: yhchiang, dhruba, igor, leveldb
Differential Revision: https://reviews.facebook.net/D17391
Summary:
By constraining the probes within cache line(s), we can improve the
cache miss rate thus performance. This probably only makes sense for
in-memory workload so defaults the option to off.
Numbers and comparision can be found in wiki:
https://our.intern.facebook.com/intern/wiki/index.php/Ljin/rocksdb_perf/2014_03_17#Bloom_Filter_Study
Test Plan: benchmarked this change substantially. Will run make all check as well
Reviewers: haobo, igor, dhruba, sdong, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17133
Summary:
Previous code had two bugs:
* didn't initialize the table_magic_number_ explicitly -- as a
result a random junk number is stored for table_magic_number_, making
HasInitializedMagicNumber() always return true.
* if condition is inconrrect in set_table_magic_number(), and the return value is not checked.
I replace if-else by a stronger requirement enforced by assert().
Test Plan:
Previous sst_dump failed to work.
After the fix, things back to normal.
Reviewers: yhchiang
CC: haobo, sdong, igor, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D17055
Summary:
I'm cleaning up some code preparing for the big diff review tomorrow. This is the first part of the cleanup.
Changes are mostly cosmetic. The goal is to decrease amount of code difference between columnfamilies and master branch.
This diff also fixes race condition when dropping column family.
Test Plan: Ran db_stress with variety of parameters
Reviewers: dhruba, haobo
Differential Revision: https://reviews.facebook.net/D16833
Summary:
(1) Fix SanitizeOptions() to also check HashLinkList. The current
dynamic case just happens to work because the 2 classes have the same
layout.
(2) Do not delete SliceTransform object in HashSkipListFactory and
HashLinkListFactory destructor. Reason: SanitizeOptions() enforces
prefix_extractor and SliceTransform to be the same object when
Hash**Factory is used. This makes the behavior strange: when
Hash**Factory is used, prefix_extractor will be released by RocksDB. If
other memtable factory is used, prefix_extractor should be released by
user.
Test Plan: db_bench && make asan_check
Reviewers: haobo, igor, sdong
Reviewed By: igor
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D16587
Summary:
Previous we did rough estimation of subindex size, which in worst case may result in array reallocation.
This patch aims to get the exact size and avoid any reallocation.
Test Plan: make all check
Reviewers: sdong, dhruba, haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16125
Summary: The assert was pointless since if if prefix is the same as the whole key, assertion will surely fail. Reason behind is when performing the internal key comparison, if user keys are the same, *key with smaller transaction id* wins.
Test Plan: make -j32 && make check
Reviewers: sdong, dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16551
Summary:
this is the key component extracted from diff: https://reviews.facebook.net/D14271
I separate it to a dedicated patch to make the review easier.
Test Plan: added a unit test and passed it.
Reviewers: haobo, sdong, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16245
Summary:
Due to a bad merge of D14163 and D14001 before checking in D14001, "direction_ = kForward;" in MergeIterator::Seek() was deleted my mistake (in commit b135d01e7b ). It will generate wrong results or assert failure after the sequence of Prev() (or SeekToLast()), Seek() and Prev().
Fix it
Test Plan: make all check
Reviewers: igor, haobo, dhruba
Reviewed By: igor
CC: yhchiang, i.am.jin.lei, ljin, leveldb
Differential Revision: https://reviews.facebook.net/D16527
Summary:
BinarySearchIndex didn't use unique_ptr to guard the block object nor
delete it in destructor, leading to valgrind failure for "definite
memory leak".
Test Plan:
re-ran the failed valgrind test cases
Summary:
My last diff was developed in MacOS but in devserver environment error occurs.
I dug into the problem and found the way we calcuate approximate data size is pretty out-of-date. We can use table properties to get more accurate results.
Test Plan: ran ./table_test and passed
Reviewers: igor, dhruba, haobo, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16509
Summary:
This patch introduced a new table options that allows us to make
block-based table's index pluggable.
To support that new features:
* Code has been refacotred to be more flexible and supports this option well.
* More documentation is added for the existing obsecure functionalities.
* Big surgeon on DataBlockReader(), where the logic was really convoluted.
* Other small code cleanups.
The pluggablility will mostly affect development of internal modules
and won't change frequently, as a result I intentionally avoid
heavy-weight patterns (like factory) and try to make it simple.
Test Plan: make all check
Reviewers: haobo, sdong
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16395
Summary:
Previous code is too convoluted and I must be drunk for letting
such code to be written without a second thought.
Thanks to the discussion with @sdong, I added the `Options` when
generating the flusher, thus avoiding the tricks.
Just FYI: I resisted to add Options in flush_block_policy.h since I
wanted to avoid cyclic dependencies: FlushBlockPolicy dpends on Options
and Options also depends FlushBlockPolicy... While I appreciate my
effort to prevent it, the old design turns out creating more troubles than
it tried to avoid.
Test Plan: ran ./table_test
Reviewers: sdong
Reviewed By: sdong
CC: sdong, leveldb
Differential Revision: https://reviews.facebook.net/D16503
Summary:
Found some function follows camel style. When naming funciton, we have two styles:
Trivially expose internal data in readonly mode: `all_lower_case()`
Regular function: `CapitalizeFirstLetter()`
I renames these functions.
Test Plan: make -j32
Reviewers: haobo, sdong, dhruba, igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16383
Summary:
PlainTable::Next() should pass the error message from ReadKey(). Now it would return a wrong error message.
Also improve the messages of status when failing to read
Test Plan: make all check
Reviewers: ljin, kailiu, haobo
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16365
Summary: This bug caused server crash issues because the filter block is too big and kept purging out of cache.
Test Plan: Wrote a new unit tests to make sure it works.
Reviewers: dhruba, haobo, igor, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16221
Summary: Provide a public API for users to access the table properties for each SSTable.
Test Plan: Added a unit tests to test the function correctness under differnet conditions.
Reviewers: haobo, dhruba, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16083
Summary: Fix table_reader_bench after some interface changes. Add it to make to avoid future breaking
Test Plan: make table_reader_bench and run it with different options.
Reviewers: kailiu, haobo
Reviewed By: haobo
CC: igor, leveldb
Differential Revision: https://reviews.facebook.net/D16107
Summary:
1. Add some more implementation-aware tests for PlainTable
2. move from a hard-coded one index per 16 rows in one prefix to a configurable number. Also, make hash table ratio = 0 means binary search only. Also fixes some divide 0 risks.
3. Explicitly support total order (only use binary search)
4. some code cleaning up.
Test Plan: make all check
Reviewers: haobo, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16023
Summary:
The change to the public behavior:
* When opening a DB or creating new column family client gets a ColumnFamilyHandle.
* As long as column family handle is alive, client can do whatever he wants with it, even drop it
* Dropped column family can still be read from (using the column family handle)
* Added a new call CloseColumnFamily(). Client has to close all column families that he has opened before deleting the DB
* As soon as column family is closed, any calls to DB using that column family handle will fail (also any outstanding calls)
Internally:
* Ref-counting ColumnFamilyData
* New thread-safety for ColumnFamilySet
* Dropped column families are now completely dropped and their memory cleaned-up
Test Plan: added some tests to column_family_test
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16101
Summary: We'll need the prefix seek support for property aggregation.
Test Plan: make all check
Reviewers: haobo, sdong, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15963
Summary:
In MacOS, I got issue with `Footer`'s default constructor, which initialized the magic number with some random number instead of 0.
With investigation, I found we forgot to make the kInvalidTableMagicNumber to be static. As a result, kInvalidTableMagicNumber was assgined to `table_magic_number_` before it is initialized (which will be populated with random number).
Test Plan: passed current unit tests; also passed the unit tests for the incoming diff which used the default footer.
Reviewers: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16077
Summary:
* Fixed the compression state array size bug.
* Temporarily disable running `DoCompressionTest()` against bzip, which will fail the test.
Test Plan: make && ./table_test
Reviewers: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16065
Summary:
We are going to expose properties of all tables to end users through "some" db interface.
However, current design doesn't naturally fit for this need, which is because:
1. If a table presents in table cache, we cannot simply return the reference to its table properties, because the table may be destroy after compaction (and we don't want to hold the ref of the version).
2. Copy table properties is OK, but it's slow.
Thus in this diff, I change the table reader's interface to return a shared pointer (for const table properties), instead a const refernce.
Test Plan: `make check` passed
Reviewers: haobo, sdong, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15999
Summary:
This diff enables the command line tool `sst_dump` to work for sst files
under plain table format. Changes include:
* In tools/sst_dump.cc:
- add support for plain table format
- display prefix_extractor information when --show_properties is on
* In table/format.cc
- Now the table magic number of a Footer can be later initialized
via ReadFooterFromFile().
* In table/meta_bocks:
- add function ReadTableMagicNumber() that reads the magic number of
the specified file.
Minor fixes:
- remove a duplicate #include in table/table_test.cc
- fix a commentary typo in include/rocksdb/memtablerep.h
- fix lint errors.
Test Plan:
Runs sst_dump with both block-based and plain-table format files with
different arguments, specifically those with --show-properties and --from.
* sample output:
https://reviews.facebook.net/P261
Reviewers: kailiu, sdong, xjin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15903
Summary:
WriteBatch can have multiple column families in one batch. Every column family has different options. So we have to add a way for write batch to get options for an arbitrary column family.
This required a bit more acrobatics since lots of interfaces had to be changed.
Test Plan: make check
Reviewers: dhruba, haobo, sdong, kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15957
Summary:
Previous I am too ambitious to hide every detail about table factory
to internal api. However, we cannot pass the compilatoin for external
users since we use table factory as the shared_ptr, which requires
the definition of table factory's destructor.
Test Plan: make check;
Reviewers: sdong, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15861
Summary: RocksDB doesn't compile on 32-bit architecture apparently. This is attempt to fix some of 32-bit errors. They are reported here: https://gist.github.com/paxos/8789697
Test Plan: RocksDB still compiles on 64-bit :)
Reviewers: kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15825
Summary: In PlainTable, use one single byte to represent 8 bytes of internal bytes, if seqID = 0 and it is value type (which should be common for bottom most files). It is to save 7 bytes for uncompressed cases.
Test Plan: make all check
Reviewers: haobo, dhruba, kailiu
Reviewed By: haobo
CC: igor, leveldb
Differential Revision: https://reviews.facebook.net/D15489
Summary:
Easy thing goes first. This patch moves arena to internal dir; based
on which, the coming patch will deal with memtable_rep.
Test Plan: make check
Reviewers: haobo, sdong, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15615
Summary: All memtables and immutable memtables are moved from DBImpl to ColumnFamilyData. For now, they are all referenced from default column family in DBImpl. It shouldn't be hard to get them from custom column family.
Test Plan: make check
Reviewers: dhruba, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15459
Summary:
Plain table has been working well and this is just a nit-picking patch,
which is generated during my coding reading. No real functional changes.
only some changes regarding:
* Improve some comments from the perspective a "new" code reader.
* Change some magic number to constant, which can help us to parameterize them
in the future.
* Did some style, naming, C++ convention changes.
* Fix warnings from new "arc lint"
Test Plan: make check
Reviewers: sdong, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15429
Summary:
We'll divide the table tests into 3 buckets, plain table test, block-based table test and general table feature test.
This diff does no real change and only does the rename and reorg.
Test Plan: run table_test
Reviewers: sdong, haobo, igor, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15417
Summary:
Mixing index/filter blocks with data blocks resulted in some known
issues. To make sure in next release our users won't be affected,
we added a new option in BlockBasedTableFactory::TableOption to
conceal this functionality for now.
This patch also introduced a BlockBasedTableReader::OpenOptions,
which avoids the "infinite" growth of parameters in
BlockBasedTableReader::Open().
Test Plan: make check
Reviewers: haobo, sdong, igor, dhruba
Reviewed By: igor
CC: leveldb, tnovak
Differential Revision: https://reviews.facebook.net/D15327
Summary: I'm separating code-cleanup part of https://reviews.facebook.net/D14517. This will make D14517 easier to understand and this diff easier to review.
Test Plan: make check
Reviewers: haobo, kailiu, sdong, dhruba, tnovak
Reviewed By: tnovak
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15099
Summary:
Some changes to PlainTable format:
(1) support variable key length
(2) use user defined slice transformer to extract prefixes
(3) Run some test cases against PlainTable in db_test and table_test
Test Plan: test db_test
Reviewers: haobo, kailiu
CC: dhruba, igor, leveldb, nkg-
Differential Revision: https://reviews.facebook.net/D14457
Summary: A bug to fix. IT's already fixed in D14457, but want to check it in sooner to unblock tests
Test Plan: plain_table_db_test
Reviewers: nkg-, haobo
Reviewed By: nkg-
CC: kailiu, leveldb
Differential Revision: https://reviews.facebook.net/D14673
Summary:
This is the last diff that adds the property block to plain table.
The format resembles that of the block-based table: https://github.com/facebook/rocksdb/wiki/Rocksdb-table-format
[data block]
[meta block 1: stats block]
[meta block 2: future extended block]
...
[meta block K: future extended block] (we may add more meta blocks in the future)
[metaindex block]
[index block: we only have the placeholder here, we can add persistent index block in the future]
[Footer: contains magic number, handle to metaindex block and index block]
<end_of_file>
Test Plan: extended existing property block test.
Reviewers: haobo, sdong, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14523
Summary:
PlainTable now has a bug of the ordering of indexes for the prefixes in the same bucket. I thought std::map guaranteed key order but it didn't, probably because I didn't use it properly. But seems to me that we don't need to make extra sorting as input prefixes are already sorted. Found by problem by running leaf4 against plain table. Replace the map with a vector. It should performs better too.
After the fix, leaf4 unit tests are passing.
Test Plan:
run plain_table_db_test
Also going to run db_test with plain table in the uncommitted branch.
Reviewers: haobo, kailiu
Reviewed By: haobo
CC: nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D14649
Summary: This change will allow other table to reuse the code for meta blocks.
Test Plan: all existing unit tests passed
Reviewers: dhruba, haobo, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14475
Summary:
As we are having different types of tables and they all might share the same structure in block-based table:
[metaindex block]
[index block]
[Footer]
To be able to identify differnt types of tables, we need to parameterize the "magic number" in the `Footer`.
Test Plan:
make check
Summary:
PlainTableReader to use a more customized hash table. This patch assumes the SST file is smaller than 2GB:
(1) Every bucket uses 32-bit integer
(2) no key is stored in bucket
(3) use the first bit of the bucket value to distinguish it points to the file offset or a second level index.
This index schema fits the use case that most of prefixes have very small number of keys
Test Plan: plain_table_db_test
Reviewers: haobo, kailiu, dhruba
Reviewed By: haobo
CC: nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D14343
Summary:
I went through all remaining shared_ptrs and removed the ones that I found not-necessary. Only GenerateCachePrefix() is called fairly often, so don't expect much perf wins.
The ones that are left are accessed infrequently and I think we're fine with keeping them.
Test Plan: make asan_check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14427
Summary: liveness of the statistics object is already ensured by the shared pointer in DB options. There's no reason to pass again shared pointer among internal functions. Raw pointer is sufficient and efficient.
Test Plan: make check
Reviewers: dhruba, MarkCallaghan, igor
Reviewed By: dhruba
CC: leveldb, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14289
Summary:
Provide a framework to profile a query in detail to figure out latency bottleneck. Currently, in Get(), Put() and iterators, 2-3 simple timing is used. We can easily add more profile counters to the framework later.
Test Plan: Enable this profiling in seveal existing tests.
Reviewers: haobo, dhruba, kailiu, emayanke, vamsi, igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14001
Conflicts:
table/merger.cc
Summary:
Provide a framework to profile a query in detail to figure out latency bottleneck. Currently, in Get(), Put() and iterators, 2-3 simple timing is used. We can easily add more profile counters to the framework later.
Test Plan: Enable this profiling in seveal existing tests.
Reviewers: haobo, dhruba, kailiu, emayanke, vamsi, igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14001
Summary:
A Simple plain table format. No block structure. When creating the table reader, scanning the full table to create indexes.
Test Plan:Add unit test
Reviewers:haobo,dhruba,kailiu
CC:
Task ID: #
Blame Rev:
Summary:
For the use cases that prefix filtering is enabled, initializing heaps when doing MergingIterator.Seek() might introduce non-negligible costs. This patch makes it lazily done.
Test Plan: make all check
Reviewers: haobo,dhruba,kailiu
CC:
Task ID: #
Blame Rev:
Summary:
Previously we introduce a `flush_block_policy_factory` in Options, however, that options is strongly releated to Table based tables.
It will make more sense to move it to block based table's own factory class.
Test Plan: make check to pass existing tests
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14211
Summary:
These bugs were caught by ASAN crash test.
1. The first one, in table/filter_block.cc is very nasty. We first reference entries_ and store the reference to Slice prev. Then, we call entries_.append(), which can change the reference. The Slice prev now points to junk.
2. The second one is a bug in a test, so it's not very serious. Once we set read_opts.prefix, we never clear it, so some other function might still reference it.
Test Plan: asan crash test now runs more than 5 mins. Before, it failed immediately. I will run the full one, but the full one takes quite some time (5 hours)
Reviewers: dhruba, haobo, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14223
Summary:
The primary motivation of the changes is to make it easier to figure out the inside of the tables.
* rename "table stats" to "table properties" since now we have more than "integers" to store in the property block.
* Add filter block size to the basic table properties.
* Whenever a table is built, we'll log the table properties (the sample output is in Test Plan).
* Make an api to expose deleted keys.
Test Plan:
Passed all existing test. and the sample output of table stats:
==================================================================
Basic Properties
------------------------------------------------------------------
# data blocks: 1
# entries: 1
raw key size: 9
raw average key size: 9
raw value size: 9
raw average value size: 0
data block size: 25
index block size: 27
filter block size: 18
(estimated) table size: 70
filter policy: rocksdb.BuiltinBloomFilter
==================================================================
User collected properties: InternalKeyPropertiesCollector
------------------------------------------------------------------
kDeletedKeys: 1
==================================================================
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14187
Summary: This diff invoves some more complicated issues in the posix environment.
Test Plan: works under mac os. will need to verify dev box.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14061
Summary:
By original design, the regular `block options` and index `block options` in table_builder is mutable. We can use ChangeOptions to change the options directly.
However, with my last change, `BlockBuilder` no longer hold the reference to the index_block_options -- as a result, any changes made after the creation of index block builder will be of no effect.
But still the code is very error-prone and developers can easily fall into the trap without aware of it. To avoid this problem from happening in the future, I deleted the `ChangeOptions` and the `index_block_options`, as well as many other changes to make it less misleading.
Test Plan:
make
make check
make release
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13707
Summary: This patch adds an option to table_reader_bench that queries run against DB level (which has one table). It is useful if user wants to see the extra costs DB level introduces.
Test Plan: Run the benchmark with and without the new parameter
Reviewers: haobo, dhruba, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13863
Summary: https://reviews.facebook.net/D13167 broke bloom filters. If filter is not in cache, we want to return true (safe thing). Am I right?
Test Plan: when benchmarking https://reviews.facebook.net/D14031 I got different results when using bloom filters vs. when not using them. This fixed the issue. I will also be putting this change to the other diff, but that one will probably be in review for longer time.
Reviewers: kailiu, dhruba, haobo
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14085
Summary: This diff leverage the existing block cache and extend it to cache index/filter block.
Test Plan:
Added new tests in db_test and table_test
The correctness is checked by:
1. make check
2. make valgrind_check
Performance is test by:
1. 10 times of build_tools/regression_build_test.sh on two versions of rocksdb before/after the code change. Test results suggests no significant difference between them. For the two key operatons `overwrite` and `readrandom`, the average iops are both 20k and ~260k, with very small variance).
2. db_stress.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, haobo, xjin
Differential Revision: https://reviews.facebook.net/D13167
Summary: The work to make sure mac os compiles rocksdb is not completed yet. But at least we can start cleaning some warnings captured only by g++ from mac os..
Test Plan: ran make in mac os
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14049
Summary: Allow block based table to configure the way flushing the blocks. This feature will allow us to add support for prefix-aligned block.
Test Plan: make check
Reviewers: dhruba, haobo, sdong, igor
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13875
Summary:
This fixes#3130525. Dhruba's suggestion and Tnovak's implementation :)
The issue was with SkipEmptyDataBlocksForward(), but I also changed SkipEmptyDataBlocksBackward(). Is that OK?
Test Plan: Run the logdevice test
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13911
Summary:
Rocksdb can now support a uncompressed block cache, or a compressed
block cache or both. Lookups first look for a block in the
uncompressed cache, if it is not found only then it is looked up
in the compressed cache. If it is found in the compressed cache,
then it is uncompressed and inserted into the uncompressed cache.
It is possible that the same block resides in the compressed cache
as well as the uncompressed cache at the same time. Both caches
have their own individual LRU policy.
Test Plan: Unit test case attached.
Reviewers: kailiu, sdong, haobo, leveldb
Reviewed By: haobo
CC: xjin, haobo
Differential Revision: https://reviews.facebook.net/D12675
Summary: Iterator benchmark case is timed incorrectly. Fix it
Test Plan: Run the benchmark
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13845
Summary: It is a very simple benchmark to measure a Table implementation's Get() and iterator performance if all the data is in memory.
Test Plan: N/A
Reviewers: dhruba, haobo, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13743
Summary:
Currently for each put, a fresh memory is allocated, and a new entry is added to the memtable with a new sequence number irrespective of whether the key already exists in the memtable. This diff is an attempt to update the value inplace for existing keys. It currently handles a very simple case:
1. Key already exists in the current memtable. Does not inplace update values in immutable memtable or snapshot
2. Latest value type is a 'put' ie kTypeValue
3. New value size is less than existing value, to avoid reallocating memory
TODO: For a put of an existing key, deallocate memory take by values, for other value types till a kTypeValue is found, ie. remove kTypeMerge.
TODO: Update the transaction log, to allow consistent reload of the memtable.
Test Plan: Added a unit test verifying the inplace update. But some other unit tests broken due to invalid sequence number checks. WIll fix them next.
Reviewers: xinyaohu, sumeet, haobo, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12423
Automatic commit by arc
Summary:
This patch is to address @haobo's comments on D13521:
1. rename Table to be TableReader and make its factory function to be GetTableReader
2. move the compression type selection logic out of TableBuilder but to compaction logic
3. more accurate comments
4. Move stat name constants into BlockBasedTable implementation.
5. remove some uncleaned codes in simple_table_db_test
Test Plan: pass test suites.
Reviewers: haobo, dhruba, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13785
Summary: This patch makes Table and TableBuilder a abstract class and make all the implementation of the current table into BlockedBasedTable and BlockedBasedTable Builder.
Test Plan: Make db_test.cc to work with block based table. Add a new test simple_table_db_test.cc where a different simple table format is implemented.
Reviewers: dhruba, haobo, kailiu, emayanke, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13521
Summary:
1. Added a new option that support user-defined table stats collection.
2. Added a deleted key stats collector in `utilities`
Test Plan:
Added a unit test for newly added code.
Also ran make check to make sure other tests are not broken.
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13491
Summary:
This bug may affect the seek performance.
Test Plan:
make
make check
Also gdb into some index block builder to make sure the restart_block_interval is `1`.
Summary:
Previous the newly added test called NewBloomFilter without releasing it at the end of the test, which resulted in memory leak and was detected by valgrind.
Test Plan:
Ran valgrind test.
Summary:
This patch adds a option for universal compaction to allow us to only compress output files if the files compacted previously did not yet reach a specified ratio, to save CPU costs in some cases.
Compression is always skipped for flushing. This is because the size information is not easy to evaluate for flushing case. We can improve it later.
Test Plan:
add test
DBTest.UniversalCompactionCompressRatio1 and DBTest.UniversalCompactionCompressRatio12
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13467
Summary: As title.
Test Plan: Updated the unit tests to make sure new statistic is correctly written/read.
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13497
Summary:
So far we only have key/value pairs as well as bloom filter stored in the
sst file. It will be great if we are able to store more metadata about
this table itself, for example, the entry size, bloom filter name, etc.
This diff is the first step of this effort. It allows table to keep the
basic statistics mentioned in http://fburl.com/14995441, as well as
allowing writing user-collected stats to stats block.
After this diff, we will figure out the interface of how to allow user to collect their interested statistics.
Test Plan:
1. Added several unit tests.
2. Ran `make check` to ensure it doesn't break other tests.
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13419
Summary:
In talbe.cc, when reading the metablock, it uses BytewiseComparator();
However in table_builder.cc, we use r->options.comparator. After tracing
the creation of r->options.comparator, I found this comparator is an
InternalKeyComparator, which wraps the user defined comparator(details
can be found in DBImpl::SanitizeOptions().
I encountered this problem when adding metadata about "bloom filter"
before. With different comparator, we may fail to do the binary sort.
Current code works well since there is only one entry in meta block.
Test Plan:
make all check
I've also tested this change in https://reviews.facebook.net/D8283 before.
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13335
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary: The pupose of this diff is to expose per user-call level precise timing of block read, so that we can answer questions like: a Get() costs me 100ms, is that somehow related to loading blocks from file system, or sth else? We will answer that with EXACTLY how many blocks have been read, how much time was spent on transfering the bytes from os, how much time was spent on checksum verification and how much time was spent on block decompression, just for that one Get. A nano second stopwatch was introduced to track time with higher precision. The cost/precision of the stopwatch is also measured in unit-test. On my dev box, retrieving one time instance costs about 30ns, on average. The deviation of timing results is good enough to track 100ns-1us level events. And the overhead could be safely ignored for 100us level events (10000 instances/s), for example, a viewstate thrift call.
Test Plan: perf_context_test, also testing with viewstate shadow traffic.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D12351
Summary:
In InternalGet, BlockReader returns an Iterator which is legitimately freed at the end of the 'else' scope. BUT there is a break statement in between and must be freed there too!
The best solution would be to move to unique_ptr and let it handle. Changed it to a unique_ptr.
Test Plan: valgrind ./db_test;make all check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12681
Summary:
If ReadOptions.non_blocking_io is set to true, then KeyMayExists
and Iterators will return data that is cached in RAM.
If the Iterator needs to do IO from storage to serve the data,
then the Iterator.status() will return Status::IsRetry().
Test Plan:
Enhanced unit test DBTest.KeyMayExist to detect if there were are IOs
issues from storage. Added DBTest.NonBlockingIteration to verify
nonblocking Iterations.
Reviewers: emayanke, haobo
Reviewed By: haobo
CC: leveldb
Maniphest Tasks: T63
Differential Revision: https://reviews.facebook.net/D12531
Summary: In KeyMayExist.db_test we do a Flush which causes sst file to be written and added as open file in TableCache, but block cache for the file is not populated. So value_found should have been false where it was true and KeyMayExist.db_test should not have passed earlier. But it passed because BlockReader in table/table.cc takes 2 default arguments at the end called for_compaction and no_io. Although I passed no_io=true from InternalGet to BlockReader, but it understood for_compaction=true and defaulted no_io to false. This is a bug and although will be removed by Dhruba's new patch to incorporate no_io in readoptions, I'm submitting this patch to fix this bug independently of that patch.
Test Plan: make all check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12537
Summary: Fix code so that the filter_block layer only assumes keys are internal when prefix_extractor is set.
Test Plan: ./filter_block_test
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12501
Summary: Replace include/leveldb with include/rocksdb.
Test Plan:
make clean; make check
make clean; make release
Differential Revision: https://reviews.facebook.net/D12489
Summary:
This patch adds three new MemTableRep's: UnsortedRep, PrefixHashRep, and VectorRep.
UnsortedRep stores keys in an std::unordered_map of std::sets. When an iterator is requested, it dumps the keys into an std::set and iterates over that.
VectorRep stores keys in an std::vector. When an iterator is requested, it creates a copy of the vector and sorts it using std::sort. The iterator accesses that new vector.
PrefixHashRep stores keys in an unordered_map mapping prefixes to ordered sets.
I also added one API change. I added a function MemTableRep::MarkImmutable. This function is called when the rep is added to the immutable list. It doesn't do anything yet, but it seems like that could be useful. In particular, for the vectorrep, it means we could elide the extra copy and just sort in place. The only reason I haven't done that yet is because the use of the ArenaAllocator complicates things (I can elaborate on this if needed).
Test Plan:
make -j32 check
./db_stress --memtablerep=vector
./db_stress --memtablerep=unsorted
./db_stress --memtablerep=prefixhash --prefix_size=10
Reviewers: dhruba, haobo, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12117
Summary: If use_prefix_filters is set and read_range>1, then the random seeks will set a the prefix filter to be the prefix of the key which was randomly selected as the target. Still need to add statistics (perhaps in a separate diff).
Test Plan: ./db_bench --benchmarks=fillseq,prefixscanrandom --num=10000000 --statistics=1 --use_prefix_blooms=1 --use_prefix_api=1 --bloom_bits=10
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, haobo
Differential Revision: https://reviews.facebook.net/D12273
Summary: Was going through the iterator related code, did some cleanup along the way. Basically replaced array with vector and adopted range based loop where applicable.
Test Plan: make check; make valgrind_check
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12435
Summary: Similar to v2 (db and table code understands prefixes), but use ReadOptions as in v3. Also, make the CreateFilter code faster and cleaner.
Test Plan: make db_test; export LEVELDB_TESTS=PrefixScan; ./db_test
Reviewers: dhruba
Reviewed By: dhruba
CC: haobo, emayanke
Differential Revision: https://reviews.facebook.net/D12027
Summary:
Here are the major changes to the Merge Interface. It has been expanded
to handle cases where the MergeOperator is not associative. It does so by stacking
up merge operations while scanning through the key history (i.e.: during Get() or
Compaction), until a valid Put/Delete/end-of-history is encountered; it then
applies all of the merge operations in the correct sequence starting with the
base/sentinel value.
I have also introduced an "AssociativeMerge" function which allows the user to
take advantage of associative merge operations (such as in the case of counters).
The implementation will always attempt to merge the operations/operands themselves
together when they are encountered, and will resort to the "stacking" method if
and only if the "associative-merge" fails.
This implementation is conjectured to allow MergeOperator to handle the general
case, while still providing the user with the ability to take advantage of certain
efficiencies in their own merge-operator / data-structure.
NOTE: This is a preliminary diff. This must still go through a lot of review,
revision, and testing. Feedback welcome!
Test Plan:
-This is a preliminary diff. I have only just begun testing/debugging it.
-I will be testing this with the existing MergeOperator use-cases and unit-tests
(counters, string-append, and redis-lists)
-I will be "desk-checking" and walking through the code with the help gdb.
-I will find a way of stress-testing the new interface / implementation using
db_bench, db_test, merge_test, and/or db_stress.
-I will ensure that my tests cover all cases: Get-Memtable,
Get-Immutable-Memtable, Get-from-Disk, Iterator-Range-Scan, Flush-Memtable-to-L0,
Compaction-L0-L1, Compaction-Ln-L(n+1), Put/Delete found, Put/Delete not-found,
end-of-history, end-of-file, etc.
-A lot of feedback from the reviewers.
Reviewers: haobo, dhruba, zshao, emayanke
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11499
Summary: Removed KeyMayExistImpl because KeyMayExist demanded Get like semantics now. Removed no_io from memtable and imm because we need the proper value now and shouldn't just stop when we see Merge in memtable. Added checks to block_cache. Updated documentation and unit-test
Test Plan: make all check;db_stress for 1 hour
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11853
Summary: This diff virtualizes the skiplist interface so that users can provide their own implementation of a backing store for MemTables. Eventually, the backing store will be responsible for its own synchronization, allowing users (and us) to experiment with different lockless implementations.
Test Plan:
make clean
make -j32 check
./db_stress
Reviewers: dhruba, emayanke, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11739
Summary:
Introduced KeyMayExist checking during writebatch-delete and removed from Outer Delete API because it uses writebatch-delete.
Added code to skip getting Table from disk if not already present in table_cache.
Some renaming of variables.
Introduced KeyMayExistImpl which allows checking since specified sequence number in GetImpl useful to check partially written writebatch.
Changed KeyMayExist to not be pure virtual and provided a default implementation.
Expanded unit-tests in db_test to check appropriately.
Ran db_stress for 1 hour with ./db_stress --max_key=100000 --ops_per_thread=10000000 --delpercent=50 --filter_deletes=1 --statistics=1.
Test Plan: db_stress;make check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D11745
Summary:
Wrote a new function in db_impl.c-CheckKeyMayExist that calls Get but with a new parameter turned on which makes Get return false only if bloom filters can guarantee that key is not in database. Delete calls this function and if the option- deletes_use_filter is turned on and CheckKeyMayExist returns false, the delete will be dropped saving:
1. Put of delete type
2. Space in the db,and
3. Compaction time
Test Plan:
make all check;
will run db_stress and db_bench and enhance unit-test once the basic design gets approved
Reviewers: dhruba, haobo, vamsi
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11607
Summary: Add a histogram to track WriteBlock times
Test Plan: db_bench and print
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11319
Summary: Table is setup for compaction using Table::SetupForCompaction. So read block calls can be differentiated b/w Gets/Compaction. Use this and measure times.
Test Plan: db_bench --statistics=1
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: leveldb, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D11217
Summary:
This diff simplifies EnvOptions by treating it as POD, similar to Options.
- virtual functions are removed and member fields are accessed directly.
- StorageOptions is removed.
- Options.allow_readahead and Options.allow_readahead_compactions are deprecated.
- Unused global variables are removed: useOsBuffer, useFsReadAhead, useMmapRead, useMmapWrite
Test Plan: make check; db_stress
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11175
Summary:
Current posix advice implementation ties up the access pattern hint with the creation of a file.
It is not possible to apply different advice for different access (random get vs compaction read),
without keeping two open files for the same table. This patch extended the RandomeAccessFile interface
to accept new access hint at anytime. Particularly, we are able to set different access hint on the same
table file based on when/how the file is used.
Two options are added to set the access hint, after the file is first opened and after the file is being
compacted.
Test Plan: make check; db_stress; db_bench
Reviewers: dhruba
Reviewed By: dhruba
CC: MarkCallaghan, leveldb
Differential Revision: https://reviews.facebook.net/D10905
Summary: a new option block_size_deviation is added.
Test Plan: run db_test and db_bench
Reviewers: dhruba, haobo
Reviewed By: haobo
Differential Revision: https://reviews.facebook.net/D10821
Summary:
This diff introduces a new Merge operation into rocksdb.
The purpose of this review is mostly getting feedback from the team (everyone please) on the design.
Please focus on the four files under include/leveldb/, as they spell the client visible interface change.
include/leveldb/db.h
include/leveldb/merge_operator.h
include/leveldb/options.h
include/leveldb/write_batch.h
Please go over local/my_test.cc carefully, as it is a concerete use case.
Please also review the impelmentation files to see if the straw man implementation makes sense.
Note that, the diff does pass all make check and truly supports forward iterator over db and a version
of Get that's based on iterator.
Future work:
- Integration with compaction
- A raw Get implementation
I am working on a wiki that explains the design and implementation choices, but coding comes
just naturally and I think it might be a good idea to share the code earlier. The code is
heavily commented.
Test Plan: run all local tests
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb, zshao, sheki, emayanke, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D9651
Summary: In table.cc, the code section that reads in BlockContent and then put it into a Block, appears at least 4 times. This is too much duplication. BlockReader is much shorter after the change and reads way better. D10077 attempted that for index block read. This is a complete cleanup.
Test Plan: make check; ./db_stress
Reviewers: dhruba, sheki
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10527
Summary:
- don't see a point exposing table.h to the public.
- fixed make clean to remove also *.d files.
Test Plan: make check; db_stress
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10479
Summary:
Earlier Statistics object was a raw pointer. This meant the user had to clear up
the Statistics object after creating the database. In most use cases the database is created in a function and the statistics pointer is out of scope. Hence the statistics object would never be deleted.
Now Using a shared_ptr to manage this.
Want this in before the next release.
Test Plan: make all check.
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9735
Summary:
This patch allows an application to specify whether to use bufferedio,
reads-via-mmaps and writes-via-mmaps per database. Earlier, there
was a global static variable that was used to configure this functionality.
The default setting remains the same (and is backward compatible):
1. use bufferedio
2. do not use mmaps for reads
3. use mmap for writes
4. use readaheads for reads needed for compaction
I also added a parameter to db_bench to be able to explicitly specify
whether to do readaheads for compactions or not.
Test Plan: make check
Reviewers: sheki, heyongqiang, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9429
Summary:
Added function to `RandomAccessFile` to generate an unique ID for that file. Currently only `PosixRandomAccessFile` has this behaviour implemented and only on Linux.
Changed how key is generated in `Table::BlockReader`.
Added tests to check whether the unique ID is stable, unique and not a prefix of another unique ID. Added tests to see that `Table` uses the cache more efficiently.
Test Plan: make check
Reviewers: chip, vamsi, dhruba
Reviewed By: chip
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8145
Summary:
Previously, if you opened a db with num_levels set lower than
the database, you received the unhelpful message "Corruption:
VersionEdit: new-file entry." Now you get a more verbose message
describing the issue.
Also, fix handling of compression_levels (both the run-over-the-end
issue and the memory management of it).
Lastly, unique_ptr'ify a couple of minor calls.
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8151
Summary:
Replace manual memory management with std::unique_ptr in a
number of places; not exhaustive, but this fixes a few leaks with file
handles as well as clarifies semantics of the ownership of file handles
with log classes.
Test Plan: db_stress, make check
Reviewers: dhruba
Reviewed By: dhruba
CC: zshao, leveldb, heyongqiang
Differential Revision: https://reviews.facebook.net/D8043
Summary:
In `Table::BlockReader()` when there was no block cache `didIO` was not set.
This didn't seem to matter as `didIO` is only used to trigger seek compactions. However, I would like it if someone else could check that is the case.
Test Plan: `make check OPT="-g -O3"`
Reviewers: dhruba, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8133
Summary:
clang is an alternate compiler based on llvm. It produces
nicer error messages and finds some bugs that gcc doesn't, such as the
size_t change in this file (which caused some write return values to be
misinterpreted!)
Clang isn't the default; to try it, do "USE_CLANG=1 make" or "export
USE_CLANG=1" then make as normal
Test Plan: "make check" and "USE_CLANG=1 make check"
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D7899
Summary:
`Table::Open()` assumes that `size` correctly describes the size of `file`, added a check that the footer is actually the right size and for good measure added assertions to `Footer::DecodeFrom()`.
This was discovered by running `valgrind ./db_test` and seeing that `Footer::DecodeFrom()` was accessing uninitialized memory.
Test Plan:
make clean check
ran `valgrind ./db_test` and saw DBTest.NoSpace no longer complains about a conditional jump being dependent on uninitialized memory.
Reviewers: dhruba, vamsi, emayanke, sheki
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7815
Summary:
The asserts introduced in https://reviews.facebook.net/D7629 are
wrong.
The direction of iteration is changed after the function call so they
assert's fail.
Test Plan: make clean check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7827
Summary:
Use a std::priority_queue in merger.cc instead of doing a o(n) search
every time.
Currently only the ForwardIteration uses a Priority Queue.
Test Plan: make all check
Reviewers: dhruba
Reviewed By: dhruba
CC: emayanke, zshao
Differential Revision: https://reviews.facebook.net/D7629
Summary: It took me almost a day to debug this. :( Although I got to learn the file format as a by-product, this time could be saved if we have better error messages.
Test Plan: gmake clean all; sst_dump --hex --file=000005.sst
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7551
Summary: This is a standalone unit test to test the format of a block.
Test Plan: ./block_test
Reviewers: sheki
Reviewed By: sheki
Differential Revision: https://reviews.facebook.net/D7533
Summary: Record BloomFliter hits and drop off reasons during compaction.
Test Plan: Unit tests work.
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6591
Summary:
Prototype stat's collection. Diff is a good estimate of what
the final code will look like.
A few assumptions :
* Used a global static instance of the statistics object. Plan to pass
it to each internal function. Static allows metrics only at app
level.
* In the Ticker's do not do any locking. Depend on the mutex at each
function of LevelDB. If we ever remove the mutex, we should change
here too. The other option is use atomic objects anyways as there
won't be any contention as they will be always acquired only by one
thread.
* The counters are dumb, increment through lifecycle. Plan to use ods
etc to get last5min stat etc.
Test Plan:
made changes in db_bench
Ran ./db_bench --statistics=1 --num=10000 --cache_size=5000
This will print the cache hit/miss stats.
Reviewers: dhruba, heyongqiang
Differential Revision: https://reviews.facebook.net/D6441
Summary:
The default compilation process now uses "-Wall" to compile.
Fix all compilation error generated by gcc.
Test Plan: make all check
Reviewers: heyongqiang, emayanke, sheki
Reviewed By: heyongqiang
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6525
Summary: Leveldb currently uses windowBits=-14 while using zlib compression.(It was earlier 15). This makes the setting configurable. Related changes here: https://reviews.facebook.net/D6105
Test Plan: make all check
Reviewers: dhruba, MarkCallaghan, sheki, heyongqiang
Differential Revision: https://reviews.facebook.net/D6393
Summary:
The leveldb API is enhanced to support different compression algorithms at
different levels.
This adds the option min_level_to_compress to db_bench that specifies
the minimum level for which compression should be done when
compression is enabled. This can be used to disable compression for levels
0 and 1 which are likely to suffer from stalls because of the CPU load
for memtable flushes and (L0,L1) compaction. Level 0 is special as it
gets frequent memtable flushes. Level 1 is special as it frequently
gets all:all file compactions between it and level 0. But all other levels
could be the same. For any level N where N > 1, the rate of sequential
IO for that level should be the same. The last level is the
exception because it might not be full and because files from it are
not read to compact with the next larger level.
The same amount of time will be spent doing compaction at any
level N excluding N=0, 1 or the last level. By this standard all
of those levels should use the same compression. The difference is that
the loss (using more disk space) from a faster compression algorithm
is less significant for N=2 than for N=3. So we might be willing to
trade disk space for faster write rates with no compression
for L0 and L1, snappy for L2, zlib for L3. Using a faster compression
algorithm for the mid levels also allows us to reclaim some cpu
without trading off much loss in disk space overhead.
Also note that little is to be gained by compressing levels 0 and 1. For
a 4-level tree they account for 10% of the data. For a 5-level tree they
account for 1% of the data.
With compression enabled:
* memtable flush rate is ~18MB/second
* (L0,L1) compaction rate is ~30MB/second
With compression enabled but min_level_to_compress=2
* memtable flush rate is ~320MB/second
* (L0,L1) compaction rate is ~560MB/second
This practicaly takes the same code from https://reviews.facebook.net/D6225
but makes the leveldb api more general purpose with a few additional
lines of code.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D6261
Summary:
In the current code, a Get() call can trigger compaction if it has to look at more than one file. This causes unnecessary compaction because looking at more than one file is a penalty only if the file is not yet in the cache. Also, th current code counts these files before the bloom filter check is applied.
This patch counts a 'seek' only if the file fails the bloom filter
check and has to read in data block(s) from the storage.
This patch also counts a 'seek' if a file is not present in the file-cache, because opening a file means that its index blocks need to be read into cache.
Test Plan: unit test attached. I will probably add one more unti tests.
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D5709
Summary:
Clean up compiler warnings generated by -Wall option.
make clean all OPT=-Wall
This is a pre-requisite before making a new release.
Test Plan: compile and run unit tests
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5019
In particular, we add a new FilterPolicy class. An instance
of this class can be supplied in Options when opening a
database. If supplied, the instance is used to generate
summaries of keys (e.g., a bloom filter) which are placed in
sstables. These summaries are consulted by DB::Get() so we
can avoid reading sstable blocks that are guaranteed to not
contain the key we are looking for.
This change provides one implementation of FilterPolicy
based on bloom filters.
Other changes:
- Updated version number to 1.4.
- Some build tweaks.
- C binding for CompactRange.
- A few more benchmarks: deleteseq, deleterandom, readmissing, seekrandom.
- Minor .gitignore update.
- Replace raw slice comparison with a call to user comparator.
Added test for custom comparators.
- Fix end of namespace comments.
- Fixed bug in picking inputs for a level-0 compaction.
When finding overlapping files, the covered range may expand
as files are added to the input set. We now correctly expand
the range when this happens instead of continuing to use the
old range. For example, suppose L0 contains files with the
following ranges:
F1: a .. d
F2: c .. g
F3: f .. j
and the initial compaction target is F3. We used to search
for range f..j which yielded {F2,F3}. However we now expand
the range as soon as another file is added. In this case,
when F2 is added, we expand the range to c..j and restart the
search. That picks up file F1 as well.
This change fixes a bug related to deleted keys showing up
incorrectly after a compaction as described in Issue 44.
(Sync with upstream @25072954)
- Removed one copy of an uncompressed block contents changing
the signature of Snappy_Uncompress() so it uncompresses into a
flat array instead of a std::string.
Speeds up readrandom ~10%.
- Instead of a combination of Env/WritableFile, we now have a
Logger interface that can be easily overridden applications
that want to supply their own logging.
- Separated out the gcc and Sun Studio parts of atomic_pointer.h
so we can use 'asm', 'volatile' keywords for Sun Studio.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@39 62dab493-f737-651d-591e-8d6aee1b9529
- LevelDB patch for Sun Studio
Based on a patch submitted by Theo Schlossnagle - thanks!
This fixes Issue 17.
- Fix a couple of test related memory leaks.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@38 62dab493-f737-651d-591e-8d6aee1b9529
- Implemented Get() directly instead of building on top of a full
merging iterator stack. This speeds up the "readrandom" benchmark
by up to 15-30%.
- Fixed an opensource compilation problem.
Added --db=<name> flag to control where the database is placed.
- Automatically compact a file when we have done enough
overlapping seeks to that file.
- Fixed a performance bug where we would read from at least one
file in a level even if none of the files overlapped the key
being read.
- Makefile fix for Mac OSX installations that have XCode 4 without XCode 3.
- Unified the two occurrences of binary search in a file-list
into one routine.
- Found and fixed a bug where we would unnecessarily search the
last file when looking for a key larger than all data in the
level.
- A fix to avoid the need for trivial move compactions and
therefore gets rid of two out of five syncs in "fillseq".
- Removed the MANIFEST file write when switching to a new
memtable/log-file for a 10-20% improvement on fill speed on ext4.
- Adding a SNAPPY setting in the Makefile for folks who have
Snappy installed. Snappy compresses values and speeds up writes.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@32 62dab493-f737-651d-591e-8d6aee1b9529
Minor changes:
* Reformat the bodies of the iterator interface routines in IteratorWrapper to
make them a bit easier to read
* Switched the default in the leveldb makefile to be optimized mode, rather
than debug mode
* Fix build problem in chromium port
git-svn-id: https://leveldb.googlecode.com/svn/trunk@30 62dab493-f737-651d-591e-8d6aee1b9529
* Patch LevelDB to build for OSX and iOS
* Fix race condition in memtable iterator deletion.
* Other small fixes.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@29 62dab493-f737-651d-591e-8d6aee1b9529
* env_chromium.cc should not export symbols.
* Fix MSVC warnings.
* Removed large value support.
* Fix broken reference to documentation file
git-svn-id: https://leveldb.googlecode.com/svn/trunk@24 62dab493-f737-651d-591e-8d6aee1b9529
Lei Jin