Summary:
There is a corner case when using WriteUnprepared transactions when
`WriteUnpreparedTxn::Get` returns `Status::TryAgain` instead of
propagating the result of `GetFromBatchAndDB`. The patch adds
`PermitUncheckedError` to make the `ASSERT_STATUS_CHECKED` build pass in
this case as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8947
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D31125422
Pulled By: ltamasi
fbshipit-source-id: 42de51dcfa9384e032244c2b4d3f40e9a4111194
Summary:
This PR tries to remove some unnecessary checks as well as unreachable code blocks to
improve readability. An obvious non-public API method naming typo is also corrected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8565
Test Plan: make check
Reviewed By: lth
Differential Revision: D29963984
Pulled By: riversand963
fbshipit-source-id: cc96e8f09890e5cfe9b20eadb63bdca5484c150a
Summary:
Some clients do not close their iterators until after the transaction finishes. To handle this case, we will invalidate any iterators on transaction clear.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7733
Reviewed By: cheng-chang
Differential Revision: D25261158
Pulled By: lth
fbshipit-source-id: b91320f00c54cbe0e6882b794b34f3bb5640dbc0
Summary:
When `ASSERT_STATUS_CHECKED` is enabled, `transaction_test` does not pass without this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7572
Test Plan: `ASSERT_STATUS_CHECKED=1 make -j32 transaction_test && ./transaction_test`
Reviewed By: zhichao-cao
Differential Revision: D24404319
Pulled By: cheng-chang
fbshipit-source-id: 13689035995366ab06d8eada3ea404e45fef8bc5
Summary:
We're going to support more locking protocols such as range lock in transaction.
However, in current design, `TransactionBase` has a member `tracked_keys` which assumes that point lock (lock a single key) is used, and is used in snapshot checking (isolation protocol). When using range lock, we may use read committed instead of snapshot checking as the isolation protocol.
The most significant usage scenarios of `tracked_keys` are:
1. pessimistic transaction uses it to track the locked keys, and unlock these keys when commit or rollback.
2. optimistic transaction does not lock keys upfront, it only tracks the lock intentions in tracked_keys, and do write conflict checking when commit.
3. each `SavePoint` tracks the keys that are locked since the `SavePoint`, `RollbackToSavePoint` or `PopSavePoint` relies on both the tracked keys in `SavePoint`s and `tracked_keys`.
Based on these scenarios, if we can abstract out a `LockTracker` interface to hold a set of tracked locks (can be keys or key ranges), and have methods that can be composed together to implement the scenarios, then `tracked_keys` can be an internal data structure of one implementation of `LockTracker`. See `utilities/transactions/lock/lock_tracker.h` for the detailed interface design, and `utilities/transactions/lock/point_lock_tracker.cc` for the implementation.
In the future, a `RangeLockTracker` can be implemented to track range locks without affecting other components.
After this PR, a clean interface for lock manager should be possible, and then ideally, we can have pluggable locking protocols.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7013
Test Plan: Run `transaction_test` and `optimistic_transaction_test`.
Reviewed By: ajkr
Differential Revision: D22163706
Pulled By: cheng-chang
fbshipit-source-id: f2860577b5334e31dd2994f5bc6d7c40d502b1b4
Summary:
The dynamic_cast in the filter benchmark causes release mode to fail due to
no-rtti. Replace with static_cast_with_check.
Signed-off-by: Derrick Pallas <derrick@pallas.us>
Addition by peterd: Remove unnecessary 2nd template arg on all static_cast_with_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6732
Reviewed By: ltamasi
Differential Revision: D21304260
Pulled By: pdillinger
fbshipit-source-id: 6e8eb437c4ca5a16dbbfa4053d67c4ad55f1608c
Summary:
Today `WriteUnpreparedTxn::RollbackInternal` will write the rollback batch assuming that there is only a single subbatch. However, because untracked_keys_ are currently not deduplicated, it's possible for duplicate keys to exist, and thus split the batch. Also, tracked_keys_ also does not support compators outside of the bytewise comparators, so it's possible for duplicates to occur there as well.
To solve this, just pass in the correct subbatch count.
Also, removed `WriteUnpreparedRollbackPreReleaseCallback` to unify the Commit/Rollback codepaths some more.
Also, fixed a bug in `CommitInternal` where if 1. two_write_queue is true and 2. include_data is true, then `WriteUnpreparedCommitEntryPreReleaseCallback` ends up calling `AddCommitted` on the commit time write batch a second time on the second write. To fix, `WriteUnpreparedCommitEntryPreReleaseCallback` is re-initialized.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6463
Differential Revision: D20150153
Pulled By: lth
fbshipit-source-id: df0b42d39406c75af73df995aa1138f0db539cd1
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
For write unprepared, some applications may bypass the transaction api, and write keys directly into the write batch. However, since they are not tracked, rollbacks (both for savepoint and transaction) are not aware that these keys have to be rolled back.
The fix is to track them in `WriteUnpreparedTxn::untracked_keys_`. This is populated whenever we flush unprepared batches into the DB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6404
Differential Revision: D19842023
Pulled By: lth
fbshipit-source-id: a9edfc643d5c905fc89da9a9a9094d30c9b70108
Summary:
**NOTE**: this also needs to be back-ported to 6.4.6 and possibly older branches if further releases from them is envisaged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6081
Differential Revision: D18710107
Pulled By: zhichao-cao
fbshipit-source-id: 03260f9316566e2bfc12c7d702d6338bb7941e01
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
Fix a bug in write unprepared savepoints. When flushing the write batch according to savepoint boundaries, we were forgetting to flush the last write batch after the last savepoint, meaning that some data was not written to DB.
Also, add a small optimization where we avoid flushing empty batches.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5703
Differential Revision: D16811996
Pulled By: lth
fbshipit-source-id: 600c7e0e520ad7a8fad32d77e11d932453e68e3f
Summary:
In MyRocks, there are cases where we write while iterating through keys. This currently breaks WBWIIterator, because if a write batch flushes during iteration, the delta iterator would point to invalid memory.
For now, fix by disallowing flush if there are active iterators. In the future, we will loop through all the iterators on a transaction, and refresh the iterators when a write batch is flushed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5699
Differential Revision: D16794157
Pulled By: lth
fbshipit-source-id: 5d5bf70688bd68fe58e8a766475ae88fd1be3190
Summary:
Currently, if a write is done without a snapshot, then `largest_validated_seq_` is set to `kMaxSequenceNumber`. This is too aggressive, because an iterator with a snapshot created after this write should be valid.
Set `largest_validated_seq_` to `GetLastPublishedSequence` instead. The variable means that no keys in the current tracked key set has changed by other transactions since `largest_validated_seq_`.
Also, do some extra cleanup in Clear() for safety.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5697
Differential Revision: D16788613
Pulled By: lth
fbshipit-source-id: f2aa40b8b12e0c0cf9e38c940fecc8f1cc0d2385
Summary:
With changes made in https://github.com/facebook/rocksdb/pull/5664 we meant to pass snap_released parameter of ::IsInSnapshot from the read callbacks. Although the variable was defined, passing it to the callback in WritePreparedTxnReadCallback was missing, which is fixed in this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5691
Differential Revision: D16767310
Pulled By: maysamyabandeh
fbshipit-source-id: 3bf53f5964a2756a66ceef7c8f6b3ac75f102f48
Summary:
The changes transaction_test to set `txn_db_options.default_write_batch_flush_threshold = 1` in order to give better test coverage for WriteUnprepared.
As part of the change, some tests had to be updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5658
Differential Revision: D16740468
Pulled By: lth
fbshipit-source-id: 3821eec20baf13917c8c1fab444332f75a509de9
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
if read_options.snapshot is not set, ::Get will take the last sequence number after taking a super-version and uses that as the sequence number. Theoretically max_eviceted_seq_ could advance this sequence number. This could lead ::IsInSnapshot that will be invoked by the ReadCallback to notice the absence of the snapshot. In this case, the ReadCallback should have passed a non-value to snap_released so that it could be set by the ::IsInSnapshot. The patch does that, and adds a unit test to verify it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5664
Differential Revision: D16614033
Pulled By: maysamyabandeh
fbshipit-source-id: 06fb3fd4aacd75806ed1a1acec7961f5d02486f2
Summary:
Add savepoint support when the current transaction has flushed unprepared batches.
Rolling back to savepoint is similar to rolling back a transaction. It requires the set of keys that have changed since the savepoint, re-reading the keys at the snapshot at that savepoint, and the restoring the old keys by writing out another unprepared batch.
For this strategy to work though, we must be capable of reading keys at a savepoint. This does not work if keys were written out using the same sequence number before and after a savepoint. Therefore, when we flush out unprepared batches, we must split the batch by savepoint if any savepoints exist.
eg. If we have the following:
```
Put(A)
Put(B)
Put(C)
SetSavePoint()
Put(D)
Put(E)
SetSavePoint()
Put(F)
```
Then we will write out 3 separate unprepared batches:
```
Put(A) 1
Put(B) 1
Put(C) 1
Put(D) 2
Put(E) 2
Put(F) 3
```
This is so that when we rollback to eg. the first savepoint, we can just read keys at snapshot_seq = 1.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5627
Differential Revision: D16584130
Pulled By: lth
fbshipit-source-id: 6d100dd548fb20c4b76661bd0f8a2647e64477fa
Summary:
In DeferSnapshotSavePointTest, writes were failing with snapshot validation error because the key with the latest sequence number was an unprepared key from the current transaction.
Fix this by passing down the correct read callback.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5657
Differential Revision: D16582466
Pulled By: lth
fbshipit-source-id: 11645dac0e7c1374d917ef5fdf757d13c1d1108d
Summary:
The `TransactionTest.MultiGetBatchedTest` were failing with unprepared batches because we were not using the correct callbacks. Override MultiGet to pass down the correct ReadCallback. A similar problem is also fixed in WritePrepared.
This PR also fixes an issue similar to (https://github.com/facebook/rocksdb/pull/5147), but for MultiGet instead of Get.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5634
Differential Revision: D16552674
Pulled By: lth
fbshipit-source-id: 736eaf8e919c6b13d5f5655b1c0d36b57ad04804
Summary:
Instead of reusing `TransactionOptions::max_write_batch_size` for determining when to flush a write batch for write unprepared, add a new variable called `write_batch_flush_threshold` for this use case instead.
Also add `TransactionDBOptions::default_write_batch_flush_threshold` which sets the default value if `TransactionOptions::write_batch_flush_threshold` is unspecified.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5633
Differential Revision: D16520364
Pulled By: lth
fbshipit-source-id: d75ae5a2141ce7708982d5069dc3f0b58d250e8c
Summary:
Simplify WriteUnpreparedTxnReadCallback so we just have one function `CalcMaxVisibleSeq`. Also, there's no need for the read callback to hold onto the transaction any more, so just hold the set of unprep_seqs, reducing about of indirection in `IsVisibleFullCheck`.
Also, some comments about using transaction snapshot were out of date, so remove them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5621
Differential Revision: D16459883
Pulled By: lth
fbshipit-source-id: cd581323fd18982e817d99af57b6eaba59e599bb
Summary:
There are a number of fixes in this PR (with most bugs found via the added stress tests):
1. Re-enable reseek optimization. This was initially disabled to avoid infinite loops in https://github.com/facebook/rocksdb/pull/3955 but this can be resolved by remembering not to reseek after a reseek has already been done. This problem only affects forward iteration in `DBIter::FindNextUserEntryInternal`, as we already disable reseeking in `DBIter::FindValueForCurrentKeyUsingSeek`.
2. Verify that ReadOption.snapshot can be safely used for iterator creation. Some snapshots would not give correct results because snaphsot validation would not be enforced, breaking some assumptions in Prev() iteration.
3. In the non-snapshot Get() case, reads done at `LastPublishedSequence` may not be enough, because unprepared sequence numbers are not published. Use `std::max(published_seq, max_visible_seq)` to do lookups instead.
4. Add stress test to test reading own writes.
5. Minor bug in the allow_concurrent_memtable_write case where we forgot to pass in batch_per_txn_.
6. Minor performance optimization in `CalcMaxUnpreparedSequenceNumber` by assigning by reference instead of value.
7. Add some more comments everywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5573
Differential Revision: D16276089
Pulled By: lth
fbshipit-source-id: 18029c944eb427a90a87dee76ac1b23f37ec1ccb
Summary:
Currently, we are tracking keys we need to rollback via a separate structure specific to WriteUnprepared in write_set_keys_.
We already have a data structure called tracked_keys_ used to track which keys to unlock on transaction termination. This is exactly what we want, since we should only rollback keys that we have locked anyway.
Save some memory by reusing that data structure instead of making our own.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5562
Differential Revision: D16206484
Pulled By: lth
fbshipit-source-id: 5894d2b824a4b19062d84adbd6e6e86f00047488
Summary:
This is a port of this PR into WriteUnprepared:
https://github.com/facebook/rocksdb/pull/5014
This also reverts this test change to restore some flaky write unprepared
tests: https://github.com/facebook/rocksdb/pull/5315
Tested with:
$ gtest-parallel ./transaction_test --gtest_filter=MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest/9 --repeat=128
[128/128] MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest/9 (18250 ms)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5439
Differential Revision: D15761405
Pulled By: lth
fbshipit-source-id: ae2581fd942d8a5b3f9278fd6bc3c1ac0b2c964c
Summary:
The patch reduces the contention over prepared_mutex_ using these techniques:
1) Move ::RemovePrepared() to be called from the commit callback when we have two write queues.
2) Use two separate mutex for PreparedHeap, one prepared_mutex_ needed for ::RemovePrepared, and one ::push_pop_mutex() needed for ::AddPrepared(). Given that we call ::AddPrepared only from the first write queue and ::RemovePrepared mostly from the 2nd, this will result into each the two write queues not competing with each other over a single mutex. ::RemovePrepared might occasionally need to acquire ::push_pop_mutex() if ::erase() ends up with calling ::pop()
3) Acquire ::push_pop_mutex() on the first callback of the write queue and release it on the last.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5420
Differential Revision: D15741985
Pulled By: maysamyabandeh
fbshipit-source-id: 84ce8016007e88bb6e10da5760ba1f0d26347735
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
When ReadOption doesn't specify a snapshot, WritePrepared::Get used kMaxSequenceNumber to avoid the cost of creating a new snapshot object (that requires sync over db_mutex). This creates a race condition if it is reading from the writes of a transaction that had duplicate keys: each instance of duplicate key is inserted with a different sequence number and depending on the ordering the ::Get might skip the newer one and read the older one that is obsolete.
The patch fixes that by using last published seq as the snapshot sequence number. It also adds a check after the read is done to ensure that the max_evicted_seq has not advanced the aforementioned seq, which is a very unlikely event. If it did, then the read is not valid since the seq is not backed by an actually snapshot to let IsInSnapshot handle that properly when an overlapping commit is evicted from commit cache.
A unit test is added to reproduce the race condition with duplicate keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5147
Differential Revision: D14758815
Pulled By: maysamyabandeh
fbshipit-source-id: a56915657132cf6ba5e3f5ea1b5d78c803407719
Summary:
In prepare phase of 2PC, the db promises to remember the prepared data, for possible future commits. To fulfill the promise the prepared data must be persisted in the WAL so that they could be recovered after a crash. The log that contains a prepare batch that is not committed yet, is marked so that it is not garbage collected before the transaction commits/rollbacks. The bug was that the write to the log file and the mark of the file was not atomic, and WAL gc could have happened before the WAL log is actually marked. This patch moves the marking logic to PreReleaseCallback so that the WAL gc logic that joins both write threads would see the WAL write and WAL mark atomically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5121
Differential Revision: D14665210
Pulled By: maysamyabandeh
fbshipit-source-id: 1d66aeb1c66a296cb4899a5a20c4d40c59e4b534
Summary:
WriteUnPrepared adds a virtual function, MaxUnpreparedSequenceNumber, to ReadCallback, which returns 0 unless WriteUnPrepared is enabled and the transaction has uncommitted data written to the DB. Together with snapshot sequence number, this determines the last sequence that is visible to reads.
The patch clarifies the guarantees of the GetIterator API in WriteUnPrepared transactions and make use of that to statically initialize the read callback and thus avoid the virtual call.
Furthermore it increases the minimum value for min_uncommitted from 0 to 1 as seq 0 is used only for last level keys that are committed in all snapshots.
The following benchmark shows +0.26% higher throughput in seekrandom benchmark.
Benchmark:
./db_bench --benchmarks=fillrandom --use_existing_db=0 --num=1000000 --db=/dev/shm/dbbench
./db_bench --benchmarks=seekrandom[X10] --use_existing_db=1 --db=/dev/shm/dbbench --num=1000000 --duration=60 --seek_nexts=100
seekrandom [AVG 10 runs] : 20355 ops/sec; 225.2 MB/sec
seekrandom [MEDIAN 10 runs] : 20425 ops/sec; 225.9 MB/sec
./db_bench_lessvirtual3 --benchmarks=seekrandom[X10] --use_existing_db=1 --db=/dev/shm/dbbench --num=1000000 --duration=60 --seek_nexts=100
seekrandom [AVG 10 runs] : 20409 ops/sec; 225.8 MB/sec
seekrandom [MEDIAN 10 runs] : 20487 ops/sec; 226.6 MB/sec
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5049
Differential Revision: D14366459
Pulled By: maysamyabandeh
fbshipit-source-id: ebaff8908332a5ae9af7defeadabcb624be660ef
Summary:
The patch adds the sequence number of the rollback patch to the PrepareHeap when two_write_queues is enabled. Although the current behavior is still correct, the change simplifies reasoning about the code, by having all uncommitted batches registered with the PreparedHeap.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5026
Differential Revision: D14249401
Pulled By: maysamyabandeh
fbshipit-source-id: 1e3424edee5cd14e56ee35931ad3c93ed997cd5a
Summary:
The read path includes a callback function, ReadCallback, which would eventually calls IsInSnapshot to figure if a particular seq is in the reading snapshot or not. This callback is virtual, which adds the cost of multiple virtual function call to each read. The first few checks in IsInSnapshot, however, are quite trivial and take care of majority of the cases. The patch moves those to a non-virtual function in the the parent class, ReadCallback, to lower the virtual callback cost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5018
Differential Revision: D14226562
Pulled By: maysamyabandeh
fbshipit-source-id: 6feed5b34f3b082e52092c5ef143e29b49c46b44
Summary:
Fix how CompactionIterator::findEarliestVisibleSnapshots handles released snapshot. It fixing the two scenarios:
Scenario 1:
key1 has two values v1 and v2. There're two snapshots s1 and s2 taken after v1 and v2 are committed. Right after compaction output v2, s1 is released. Now findEarliestVisibleSnapshot may see s1 being released, and return the next snapshot, which is s2. That's larger than v2's earliest visible snapshot, which was s1.
The fix: the only place we check against last snapshot and current key snapshot is when we decide whether to compact out a value if it is hidden by a later value. In the check if we see current snapshot is even larger than last snapshot, we know last snapshot is released, and we are safe to compact out current key.
Scenario 2:
key1 has two values v1 and v2. there are two snapshots s1 and s2 taken after v1 and v2 are committed. During compaction before we process the key, s1 is released. When compaction process v2, snapshot checker may return kSnapshotReleased, and the earliest visible snapshot for v2 become s2. When compaction process v1, snapshot checker may return kIsInSnapshot (for WritePrepared transaction, it could be because v1 is still in commit cache). The result will become inconsistent here.
The fix: remember the set of released snapshots ever reported by snapshot checker, and ignore them when finding result for findEarliestVisibleSnapshot.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4890
Differential Revision: D13705538
Pulled By: maysamyabandeh
fbshipit-source-id: e577f0d9ee1ff5a6035f26859e56902ecc85a5a4
Summary:
Previously IsInSnapshot assumed that the snapshot is valid at the time that the function is called. However there are cases where that might not be valid. Example is background compactions where the compaction algorithm operates with a list of snapshots some of which might be released by the time they are being passed to IsInSnapshot. The patch make two changes to enable the caller to tell difference: i) any live snapshot below max is added to max_committed_seq_, which allows IsInSnapshot to confidently tell whether the passed snapshot is invalid if it below max, ii) extends IsInSnapshot API with a "released" variable that is set true when IsInSnapshot find no such snapshot below max and also find no other way to give a certain return value. In such cases the return value is true but the caller should also check the "released" boolean after the call.
In short here is the changes in the API:
i) If the snapshot is valid, no change is required.
ii) If the snapshot might be invalid, a reference to "released" boolean must be passed to IsInSnapshot.
ii-a) If snapshot is above max, IsInSnapshot can figure the return valid using the commit cache.
ii-b) otherwise if snapshot is in old_commit_map_, IsInSnapshot can use that to tell if value was visible to the snapshot.
ii-c) otherwise it sets "released" to true and returns true as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4856
Differential Revision: D13599847
Pulled By: maysamyabandeh
fbshipit-source-id: 1752be28667f886a1efec8cae5714b9b7a8f1e0f
Summary:
Transaction::GetForUpdate is extended with a do_validate parameter with default value of true. If false it skips validating the snapshot (if there is any) before doing the read. After the read it also returns the latest value (expects the ReadOptions::snapshot to be nullptr). This allows RocksDB applications to use GetForUpdate similarly to how InnoDB does. Similarly ::Merge, ::Put, ::Delete, and ::SingleDelete are extended with assume_exclusive_tracked with default value of false. It true it indicates that call is assumed to be after a ::GetForUpdate(do_validate=false).
The Java APIs are accordingly updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4680
Differential Revision: D13068508
Pulled By: maysamyabandeh
fbshipit-source-id: f0b59db28f7f6a078b60844d902057140765e67d
Summary:
Current implementation of `current_over_upper_bound_` fails to take into consideration that keys might be invalid in either base iterator or delta iterator. Calling key() in such scenario will lead to assertion failure and runtime errors.
This PR addresses the bug by adding check for valid keys before calling `IsOverUpperBound()`, also added test coverage for iterate_upper_bound usage in BaseDeltaIterator
Also recommit https://github.com/facebook/rocksdb/pull/4656 (It was reverted earlier due to bugs)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4702
Differential Revision: D13146643
Pulled By: miasantreble
fbshipit-source-id: 6d136929da12d0f2e2a5cea474a8038ec5cdf1d0
Summary:
Currently transaction iterator does not apply `ReadOptions.iterate_upper_bound` when iterating. This PR attempts to fix the problem by having `BaseDeltaIterator` enforcing the upper bound check when iterator state is changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4656
Differential Revision: D13039257
Pulled By: miasantreble
fbshipit-source-id: 909eb9f6b4597a4d80418fb139f32ec82c6ec1d1
Summary:
This adds support for writing unprepared batches based on size defined in `TransactionOptions::max_write_batch_size`. This is done by overriding methods that modify data (Put/Delete/SingleDelete/Merge) and checking first if write batch size has exceeded threshold. If so, the write batch is written to DB as an unprepared batch.
Support for Commit/Rollback for unprepared batch is added as well. This has been done by simply extending the WritePrepared Commit/Rollback logic to take care of all unprep_seq numbers either when updating prepare heap, or adding to commit map. For updating the commit map, this logic exists inside `WriteUnpreparedCommitEntryPreReleaseCallback`.
A test change was also made to have transactions unregister themselves when committing without prepare. This is because with write unprepared, there may be unprepared entries (which act similarly to prepared entries) already when a commit is done without prepare.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4104
Differential Revision: D8785717
Pulled By: lth
fbshipit-source-id: c02006e281ec1ce00f628e2a7beec0ee73096a91
Summary:
This is implemented by extending ReadCallback with another function `MaxUnpreparedSequenceNumber` which returns the largest visible sequence number for the current transaction, if there is uncommitted data written to DB. Otherwise, it returns zero, indicating no uncommitted data.
There are the places where reads had to be modified.
- Get and Seek/Next was just updated to seek to max(snapshot_seq, MaxUnpreparedSequenceNumber()) instead, and iterate until a key was visible.
- Prev did not need need updates since it did not use the Seek to sequence number optimization. Assuming that locks were held when writing unprepared keys, and ValidateSnapshot runs, there should only be committed keys and unprepared keys of the current transaction, all of which are visible. Prev will simply iterate to get the last visible key.
- Reseeking to skip keys optimization was also disabled for write unprepared, since it's possible to hit the max_skip condition even while reseeking. There needs to be some way to resolve infinite looping in this case.
Closes https://github.com/facebook/rocksdb/pull/3955
Differential Revision: D8286688
Pulled By: lth
fbshipit-source-id: 25e42f47fdeb5f7accea0f4fd350ef35198caafe
Levi Tamasi