Summary:
Pass in `for_compaction` to `BlockBasedTableIterator` via `BlockBasedTableReader::NewIterator`.
In 7103559f49, `for_compaction` was set in `BlockBasedTable::Rep` via `BlockBasedTable::SetupForCompaction`. In hindsight it was not the right decision; it also caused TSAN to complain.
Closes https://github.com/facebook/rocksdb/pull/4048
Differential Revision: D8601056
Pulled By: sagar0
fbshipit-source-id: 30127e898c15c38c1080d57710b8c5a6d64a0ab3
Summary:
Top-level index in partitioned index/filter blocks are small and could be pinned in memory. So far we use that by cache_index_and_filter_blocks to false. This however make it difficult to keep account of the total memory usage. This patch introduces pin_top_level_index_and_filter which in combination with cache_index_and_filter_blocks=true keeps the top-level index in cache and yet pinned them to avoid cache misses and also cache lookup overhead.
Closes https://github.com/facebook/rocksdb/pull/4037
Differential Revision: D8596218
Pulled By: maysamyabandeh
fbshipit-source-id: 3a5f7f9ca6b4b525b03ff6bd82354881ae974ad2
Summary:
This PR extends the improvements in #3282 to also work when using Direct IO.
We see **4.5X performance improvement** in seekrandom benchmark doing long range scans, when using direct reads, on flash.
**Description:**
This change improves the performance of iterators doing long range scans (e.g. big/full index or table scans in MyRocks) by using readahead and prefetching additional data on each disk IO, and storing in a local buffer. This prefetching is automatically enabled on noticing more than 2 IOs for the same table file during iteration. The readahead size starts with 8KB and is exponentially increased on each additional sequential IO, up to a max of 256 KB. This helps in cutting down the number of IOs needed to complete the range scan.
**Implementation Details:**
- Used `FilePrefetchBuffer` as the underlying buffer to store the readahead data. `FilePrefetchBuffer` can now take file_reader, readahead_size and max_readahead_size as input to the constructor, and automatically do readahead.
- `FilePrefetchBuffer::TryReadFromCache` can now call `FilePrefetchBuffer::Prefetch` if readahead is enabled.
- `AlignedBuffer` (which is the underlying store for `FilePrefetchBuffer`) now takes a few additional args in `AlignedBuffer::AllocateNewBuffer` to allow copying data from the old buffer.
- Made sure not to re-read partial chunks of data that were already available in the buffer, from device again.
- Fixed a couple of cases where `AlignedBuffer::cursize_` was not being properly kept up-to-date.
**Constraints:**
- Similar to #3282, this gets currently enabled only when ReadOptions.readahead_size = 0 (which is the default value).
- Since the prefetched data is stored in a temporary buffer allocated on heap, this could increase the memory usage if you have many iterators doing long range scans simultaneously.
- Enabled only for user reads, and disabled for compactions. Compaction reads are controlled by the options `use_direct_io_for_flush_and_compaction` and `compaction_readahead_size`, and the current feature takes precautions not to mess with them.
**Benchmarks:**
I used the same benchmark as used in #3282.
Data fill:
```
TEST_TMPDIR=/data/users/$USER/benchmarks/iter ./db_bench -benchmarks=fillrandom -num=1000000000 -compression_type="none" -level_compaction_dynamic_level_bytes
```
Do a long range scan: Seekrandom with large number of nexts
```
TEST_TMPDIR=/data/users/$USER/benchmarks/iter ./db_bench -benchmarks=seekrandom -use_direct_reads -duration=60 -num=1000000000 -use_existing_db -seek_nexts=10000 -statistics -histogram
```
```
Before:
seekrandom : 37939.906 micros/op 26 ops/sec; 29.2 MB/s (1636 of 1999 found)
With this change:
seekrandom : 8527.720 micros/op 117 ops/sec; 129.7 MB/s (6530 of 7999 found)
```
~4.5X perf improvement. Taken on an average of 3 runs.
Closes https://github.com/facebook/rocksdb/pull/3884
Differential Revision: D8082143
Pulled By: sagar0
fbshipit-source-id: 4d7a8561cbac03478663713df4d31ad2620253bb
Summary:
https://github.com/facebook/rocksdb/pull/3764 introduced an optimization feature to skip duplicate prefix entires in full bloom filters. Unfortunately it also introduces a bug in partitioned full filters, where the duplicate prefix should still be inserted if it is in a new partition. The patch fixes the bug by resetting the duplicate detection logic each time a partition is cut.
This bug could result into false negatives, which means that DB could skip an existing key.
Closes https://github.com/facebook/rocksdb/pull/4024
Differential Revision: D8518866
Pulled By: maysamyabandeh
fbshipit-source-id: 044f4d988e606a330ecafd8c79daceb68b8796bf
Summary:
b555ed30a4 makes the BlockBasedTableIterator to be invalidated if the current position if over the upper bound. However, this can bring performance regression to the case of multiple Seek()s hitting the same data block but all out of upper bound.
For example, if an SST file has a data block containing following keys : {a, z}
The user sets the upper bound to be "x", and it executed following queries:
Seek("b")
Seek("c")
Seek("d")
Before the upper bound optimization, these queries always come to this same current data block of the iterator, but now inside each Seek() the data block is read from the block cache but is returned again.
To prevent this regression case, we keep the current data block iterator if it is upper bound.
Closes https://github.com/facebook/rocksdb/pull/4004
Differential Revision: D8463192
Pulled By: siying
fbshipit-source-id: 8710628b30acde7063a097c3184d6c4333a8ef81
Summary:
The Block object assumes contents are uncompressed. Block's constructor tries to read the number of restarts, but does not get an accurate number when its contents are compressed, which is causing issues like https://github.com/facebook/rocksdb/issues/3843.
This PR address this issue by skipping reconstruction of restart points when blocks are known to be compressed. Somehow the restart points can be read directly when Snappy is used and some tests (for example https://github.com/facebook/rocksdb/blob/master/db/db_block_cache_test.cc#L196) expects blocks to be fully constructed even when Snappy compression is used, so here we keep the restart point logic for Snappy.
Closes https://github.com/facebook/rocksdb/pull/3996
Differential Revision: D8416186
Pulled By: miasantreble
fbshipit-source-id: 002c0b62b9e5d89fb7736563d354ce0023c8cb28
Summary:
A recent change pushed down the upper bound checking to child iterators. However, this causes the logic of following sequence wrong:
Seek(key);
if (!Valid()) SeekToLast();
Because !Valid() may be caused by upper bounds, rather than the end of the iterator. In this case SeekToLast() points to totally wrong places. This can cause wrong results, infinite loops, or segfault in some cases.
This sequence is called when changing direction from forward to backward. And this by itself also implicitly happen during reseeking optimization in Prev().
Fix this bug by using SeekForPrev() rather than this sequuence, as what is already done in prefix extrator case.
Closes https://github.com/facebook/rocksdb/pull/3989
Differential Revision: D8385422
Pulled By: siying
fbshipit-source-id: 429e869990cfd2dc389421e0836fc496bed67bb4
Summary:
The sixth argument should be `key_includes_seq` bool, the seventh a `GetContext*`. We were mistakenly passing the `GetContext*` as the sixth argument and relying on the default (nullptr) for the seventh. This would make statistics inaccurate, at least.
Blame: 402b7aa0
Closes https://github.com/facebook/rocksdb/pull/3974
Differential Revision: D8344907
Pulled By: ajkr
fbshipit-source-id: 3ad865a0541d6d30f75dfc726352788118cfe12e
Summary:
Property block will be read sequentially and cached in a heap located
object, so there's no need for restart points. Thus we set the restart
interval to infinity to save space.
Closes https://github.com/facebook/rocksdb/pull/3970
Differential Revision: D8332586
Pulled By: fgwu
fbshipit-source-id: 899c3267832a81d0f084ec2db6b387332f461134
Summary:
BadOptions test creates a temporary db path changed to
table_block_based_bad_options_test to avoid collide with that created by
the PrefixAndWholeKeyTest
Closes https://github.com/facebook/rocksdb/pull/3965
Differential Revision: D8316080
Pulled By: fgwu
fbshipit-source-id: bb8e0fdfdb9abf0e5ce94494b4388cd1622ee032
Summary:
format_version 3 changes the format of index blocks by storing user keys instead of the internal keys, which saves 8-bytes per key. This patch extends the format to top-level indexes in partitioned index/filters.
Closes https://github.com/facebook/rocksdb/pull/3958
Differential Revision: D8294615
Pulled By: maysamyabandeh
fbshipit-source-id: 17666cc16b8076c363972e2308e31547e835f0fe
Summary:
PR https://github.com/facebook/rocksdb/pull/3838 made some changes that triggers lint warnings.
Run `make format` to fix formatting as suggested by siying .
Also piggyback two changes:
1) fix singleton destruction order for windows and posix env
2) fix two clang warnings
Closes https://github.com/facebook/rocksdb/pull/3954
Differential Revision: D8272041
Pulled By: miasantreble
fbshipit-source-id: 7c4fd12bd17aac13534520de0c733328aa3c6c9f
Summary:
This fixes a regression in one of myrocks regression tests (readwhilewriting), introduced in 8bf555f487
This PR changes two lines of code: one of them actually fixes the observed regression, the other is a mostly unrelated small fix that I'm piggy-backing here. EDIT: Nevermind, it fixes one line. More details in inline comments.
Closes https://github.com/facebook/rocksdb/pull/3953
Differential Revision: D8270664
Pulled By: al13n321
fbshipit-source-id: a7d91e196807d1e816551591257c700f70e4ccac
Summary:
format_version=3 changes the format of SST index. This is however not being tested currently since tests only work with the default format_version which is currently 2. The patch extends the most related tests to also test for format_version=3.
Closes https://github.com/facebook/rocksdb/pull/3942
Differential Revision: D8238413
Pulled By: maysamyabandeh
fbshipit-source-id: 915725f55753dd8e9188e802bf471c23645ad035
Summary:
Windows does not have LD_PRELOAD mechanism to override all memory allocation functions and ZSTD makes use of C-tuntime calloc. During flushes and compactions default system allocator fragments and the system slows down considerably.
For builds with jemalloc we employ an advanced ZSTD context creation API that re-directs memory allocation to jemalloc. To reduce the cost of context creation on each block we cache ZSTD context within the block based table builder while a new SST file is being built, this will help all platform builds including those w/o jemalloc. This avoids system allocator fragmentation and improves the performance.
The change does not address random reads and currently on Windows reads with ZSTD regress as compared with SNAPPY compression.
Closes https://github.com/facebook/rocksdb/pull/3838
Differential Revision: D8229794
Pulled By: miasantreble
fbshipit-source-id: 719b622ab7bf4109819bc44f45ec66f0dd3ee80d
Summary:
For iterator reads, a `SuperVersion` is pinned to preserve a snapshot of SST files, and `Block`s are pinned to allow `key()` and `value()` to return pointers directly into a RocksDB memory region. This works for both non-mmap reads, where the block owns the memory region, and mmap reads, where the file owns the memory region.
For point reads with `PinnableSlice`, only the `Block` object is pinned. This works for non-mmap reads because the block owns the memory region, so even if the file is deleted after compaction, the memory region survives. However, for mmap reads, file deletion causes the memory region to which the `PinnableSlice` refers to be unmapped. The result is usually a segfault upon accessing the `PinnableSlice`, although sometimes it returned wrong results (I repro'd this a bunch of times with `db_stress`).
This PR copies the value into the `PinnableSlice` when it comes from mmap'd memory. We can tell whether the `Block` owns its memory using `Block::cachable()`, which is unset when reads do not use the provided buffer as is the case with mmap file reads. When that is false we ensure the result of `Get()` is copied.
This feels like a short-term solution as ideally we'd have the `PinnableSlice` pin the mmap'd memory so we can do zero-copy reads. It seemed hard so I chose this approach to fix correctness in the meantime.
Closes https://github.com/facebook/rocksdb/pull/3881
Differential Revision: D8076288
Pulled By: ajkr
fbshipit-source-id: 31d78ec010198723522323dbc6ea325122a46b08
Summary:
This should resolve the performance regression caused by the unnecessary copying of the shared_ptr.
Closes https://github.com/facebook/rocksdb/pull/3937
Differential Revision: D8232330
Pulled By: miasantreble
fbshipit-source-id: 7885bf7cd190b6f87164c52d6edd328298c13f97
Summary:
DBTestBase::OptionConfig includes the scenarios that unit tests could iterate over them by calling ChangeOptions(). Some of the options have been mistakenly put after kEnd which makes them essentially invisible to ChangeOptions() caller. This patch fixes it except for kUniversalSubcompactions which is left as TODO since it would break some unit tests.
Closes https://github.com/facebook/rocksdb/pull/3935
Differential Revision: D8230748
Pulled By: maysamyabandeh
fbshipit-source-id: edddb8fffcd161af1809fef24798ce118f8593db
Summary:
The very old sst formats do not have table_properties and rep_->table_properties is thus nullptr. The recent patch in https://github.com/facebook/rocksdb/pull/3894 does not check for nullptr and hence makes it backward incompatible. This patch adds the check.
Closes https://github.com/facebook/rocksdb/pull/3918
Differential Revision: D8188638
Pulled By: maysamyabandeh
fbshipit-source-id: b1d986665ecf0b4d1c442adfa8a193b97707d47b
Summary:
Index blocks have the same format as data blocks. The keys therefore similarly to the keys in the data blocks are internal keys, which means that in addition to the user key it also has 8 bytes that encodes sequence number and value type. This extra 8 bytes however is not necessary in index blocks since the index keys act as an separator between two data blocks. The only exception is when the last key of a block and the first key of the next block share the same user key, in which the sequence number is required to act as a separator.
The patch excludes the sequence from index keys only if the above special case does not happen for any of the index keys. It then records that in the property block. The reader looks at the property block to see if it should expect sequence numbers in the keys of the index block.s
Closes https://github.com/facebook/rocksdb/pull/3894
Differential Revision: D8118775
Pulled By: maysamyabandeh
fbshipit-source-id: 915479f028b5799ca91671d67455ecdefbd873bd
Summary:
This was missed in a refactor of `ReadBlockContents` (2f1a3a4).
Closes https://github.com/facebook/rocksdb/pull/3906
Differential Revision: D8172648
Pulled By: ajkr
fbshipit-source-id: 27e453b19795fea974bfed4721105be6f3a12090
Summary:
Please refer to earlier discussion in [issue 3609](https://github.com/facebook/rocksdb/issues/3609).
There was also an alternative fix in [PR 3888](https://github.com/facebook/rocksdb/pull/3888), but the proposed solution requires complex change.
To summarize the cause of the problem. Upon creation of a column family, a `BlockBasedTableFactory` object is `new`ed and encapsulated by a `std::shared_ptr`. Since there is no other `std::shared_ptr` pointing to this `BlockBasedTableFactory`, when the column family is dropped, the `ColumnFamilyData` is `delete`d, causing the destructor of `std::shared_ptr`. Since there is no other `std::shared_ptr`, the underlying memory is also freed.
Later when the db exits, it releases all the table readers, including the table readers that have been operating on the dropped column family. This needs to access the `table_options` owned by `BlockBasedTableFactory` that has already been deleted. Therefore, a segfault is raised.
Previous workaround is to purge all obsolete files upon `ColumnFamilyData` destruction, which leads to a force release of table readers of the dropped column family. However this does not work when the user disables file deletion.
Our solution in this PR is making a copy of `table_options` in `BlockBasedTable::Rep`. This solution increases memory copy and usage, but is much simpler.
Test plan
```
$ make -j16
$ ./column_family_test --gtest_filter=ColumnFamilyTest.CreateDropAndDestroy:ColumnFamilyTest.CreateDropAndDestroyWithoutFileDeletion
```
Expected behavior:
All tests should pass.
Closes https://github.com/facebook/rocksdb/pull/3898
Differential Revision: D8149421
Pulled By: riversand963
fbshipit-source-id: eaecc2e064057ef607fbdd4cc275874f866c3438
Summary:
Currently when ldb built from master tries to open a DB from version 2.2, there will be a segfault because table_properties didn't exist back then.
Closes https://github.com/facebook/rocksdb/pull/3890
Differential Revision: D8100914
Pulled By: miasantreble
fbshipit-source-id: b255e8aedc54695432be2e704839c857dabdd65a
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
`RangeDelAggregator` holds the pointers returned by `BlockIter::key()` and `BlockIter::value()` so requires the data to which they point is pinned. `BlockIter::key()` points into block memory and is guaranteed to be pinned if and only if prefix encoding is disabled (or, equivalently, restart interval is set to one). I think `BlockIter::value()` is always pinned. Added an assert for these and removed the wrong TODO about increasing restart interval, which would enable key prefix encoding and break the assertion.
Closes https://github.com/facebook/rocksdb/pull/3875
Differential Revision: D8063667
Pulled By: ajkr
fbshipit-source-id: 60b5ebcc0cdd610dd6aad9e74a23378793672c41
Summary:
Right now, every Block::NewIterator() reads num_restarts_ from the block, which is already read in Block::Block(). This sometimes cause a CPU cache miss. Although fetching this cacheline can usually benefit follow-up block restart offset reading, as they are close to each other, it's almost free to get ride of this read by storing it in the Block class.
Closes https://github.com/facebook/rocksdb/pull/3869
Differential Revision: D8052493
Pulled By: siying
fbshipit-source-id: 9c72360f0c2d7329f3c198ce4eaedd2bc14b87c1
Summary:
Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are:
* If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted.
* When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not.
However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours).
This PR changes the convention to:
* If status() is not ok, Valid() always returns false.
* Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.)
This does sacrifice the two use cases listed above, but siying said it's ok.
Overview of the changes:
* A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario.
* Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed.
* A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator.
To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types:
Iterators that didn't need changes:
* status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator.
* Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator.
Iterators with changes (see inline comments for details):
* DBIter - an overhaul:
- It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back.
- It had a few code paths silently discarding subiterator's status. The stress test caught a few.
- The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example.
- Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption.
- It used to not reset status on seek for some types of errors.
- Some simplifications and better comments.
- Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer.
* MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status.
* ForwardIterator - changed to the new convention, also slightly simplified.
* ForwardLevelIterator - fixed some bugs and simplified.
* LevelIterator - simplified.
* TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_.
* BlockBasedTableIterator - minor changes.
* BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid.
* PlainTableIterator - some seeks used to not reset status.
* CuckooTableIterator - tiny code cleanup.
* ManagedIterator - fixed some bugs.
* BaseDeltaIterator - changed to the new convention and fixed a bug.
* BlobDBIterator - seeks used to not reset status.
* KeyConvertingIterator - some small change.
Closes https://github.com/facebook/rocksdb/pull/3810
Differential Revision: D7888019
Pulled By: al13n321
fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
Summary:
Now BlockBasedTableIterator directly uses BlockIter. By making BlockIter final, we can prevent unintended virtual function overriding.
Closes https://github.com/facebook/rocksdb/pull/3828
Differential Revision: D7933816
Pulled By: siying
fbshipit-source-id: 026a08cb5c5b6d3d6f44743152b4251da4756f2c
Summary:
Currently HarnessTest.Randomized is already split but some of the splits are faster than the others. The reason is that each split takes a continuous range of the generated args and the test with later args takes longer to finish. The patch evenly split the args among splits in a round robin fashion.
Before:
```
[ OK ] HarnessTest.Randomized1n2 (2278 ms)
[ OK ] HarnessTest.Randomized3n4 (1095 ms)
[ OK ] HarnessTest.Randomized5 (658 ms)
[ OK ] HarnessTest.Randomized6 (1258 ms)
[ OK ] HarnessTest.Randomized7 (6476 ms)
[ OK ] HarnessTest.Randomized8 (8182 ms)
```
After
```
[ OK ] HarnessTest.Randomized1 (2649 ms)
[ OK ] HarnessTest.Randomized2 (2645 ms)
[ OK ] HarnessTest.Randomized3 (2577 ms)
[ OK ] HarnessTest.Randomized4 (2490 ms)
[ OK ] HarnessTest.Randomized5 (2553 ms)
[ OK ] HarnessTest.Randomized6 (2560 ms)
[ OK ] HarnessTest.Randomized7 (2501 ms)
[ OK ] HarnessTest.Randomized8 (2574 ms)
```
Closes https://github.com/facebook/rocksdb/pull/3808
Differential Revision: D7882663
Pulled By: maysamyabandeh
fbshipit-source-id: 09b749a9684b6d7d65466aa4b00c5334a49e833e
Summary:
When the dummy record insertion fails, there is no need to explicitly delete the block as it will be registered for cleanup regardless.
Closes https://github.com/facebook/rocksdb/pull/3688
Differential Revision: D7537741
Pulled By: miasantreble
fbshipit-source-id: fcd3a3d3d382ee8e2c7ced0a4980e683d93a16d6
Summary:
7a6353bd1c prevents empty filter blocks from being written for SST files containing range deletions only. However the assertion this PR removes is still a problem as we could be reading from a DB generated by a RocksDB build without the 7a6353bd1c patch. So remove the assertion. We already don't do this check when `cache_index_and_filter_blocks=false`, so it should be safe.
Closes https://github.com/facebook/rocksdb/pull/3773
Differential Revision: D7769964
Pulled By: ajkr
fbshipit-source-id: 7285762446f2cd2ccf16efd7a988a106fbb0d8d3
Summary:
bc0da4b512 optimized bloom filters by skipping duplicate entires when the whole key and prefixes are both added to the bloom. It however used empty string as the initial value of the last entry added to the bloom. This is incorrect since empty key/prefix are valid entires by themselves. This patch fixes that.
Closes https://github.com/facebook/rocksdb/pull/3776
Differential Revision: D7778803
Pulled By: maysamyabandeh
fbshipit-source-id: d5a065daebee17f9403cac51e9d5626aac87bfbc
Summary:
Currently we rely on FilterBitsBuilder to skip the duplicate keys. It does that by comparing that hash of the key to the hash of the last added entry. This logic breaks however when we have whole_key_filtering mixed with prefix blooms as their addition to FilterBitsBuilder will be interleaved. The patch fixes that by comparing the last whole key and last prefix with the whole key and prefix of the new key respectively and skip the call to FilterBitsBuilder if it is a duplicate.
Closes https://github.com/facebook/rocksdb/pull/3764
Differential Revision: D7744413
Pulled By: maysamyabandeh
fbshipit-source-id: 15df73bbbafdfd754d4e1f42ea07f47b03bc5eb8
Summary:
Currently the partitioned index iterator creates a new ReadOptions which ignores the fill_cache config set to ReadOptions passed by the user. The patch propagates fill_cache from the user's ReadOptions to that of partition index iterator.
Also it clarifies the contract of fill_cache that i) it does not apply to filters, ii) it still charges block cache for the size of the data block, it still pin the block if it is already in the block cache.
Closes https://github.com/facebook/rocksdb/pull/3739
Differential Revision: D7678308
Pulled By: maysamyabandeh
fbshipit-source-id: 53ed96424ae922e499e2d4e3580ddc3f0db893da
Summary:
this PR fixes a few failed contbuild:
1. ASAN memory leak in Block::NewIterator (table/block.cc:429). the proper destruction of first_level_iter_ and second_level_iter_ of two_level_iterator.cc is missing from the code after the refactoring in https://github.com/facebook/rocksdb/pull/3406
2. various unused param errors introduced by https://github.com/facebook/rocksdb/pull/3662
3. updated comment for `ForceReleaseCachedEntry` to emphasize the use of `force_erase` flag.
Closes https://github.com/facebook/rocksdb/pull/3718
Reviewed By: maysamyabandeh
Differential Revision: D7621192
Pulled By: miasantreble
fbshipit-source-id: 476c94264083a0730ded957c29de7807e4f5b146
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
The existing unit test did not set the level so the check for pinned partitioned filter/index being properly released from the block cache was not properly exercised as they only take effect in level 0. As a result a memory leak in pinned partitioned filters was hidden. The patch fix the test as well as the bug.
Closes https://github.com/facebook/rocksdb/pull/3692
Differential Revision: D7559763
Pulled By: maysamyabandeh
fbshipit-source-id: 55eff274945838af983c764a7d71e8daff092e4a
Summary:
Adds two stats to allow us measuring the false positive rate of full filters:
- The total count of positives: rocksdb.bloom.filter.full.positive
- The total count of true positives: rocksdb.bloom.filter.full.true.positive
Not the term "full" in the stat name to indicate that they are meaningful in full filters. block-based filters are to be deprecated soon and supporting it is not worth the the additional cost of if-then-else branches.
Closes#3680
Tested by:
$ ./db_bench -benchmarks=fillrandom -db /dev/shm/rocksdb-tmpdb --num=1000000 -bloom_bits=10
$ ./db_bench -benchmarks="readwhilewriting" -db /dev/shm/rocksdb-tmpdb --statistics -bloom_bits=10 --duration=60 --num=2000000 --use_existing_db 2>&1 > /tmp/full.log
$ grep filter.full /tmp/full.log
rocksdb.bloom.filter.full.positive COUNT : 3628593
rocksdb.bloom.filter.full.true.positive COUNT : 3536026
which gives the false positive rate of 2.5%
Closes https://github.com/facebook/rocksdb/pull/3681
Differential Revision: D7517570
Pulled By: maysamyabandeh
fbshipit-source-id: 630ab1a473afdce404916d297035b6318de4c052
Summary:
Our valgrind continuous test found an interesting leak which got introduced in #3614. We were adding the prefix key before saving the previous prefix start offset, due to which previous prefix offset is always incorrect. Fixed it by saving the the previous sate before adding the key.
Closes https://github.com/facebook/rocksdb/pull/3660
Differential Revision: D7418698
Pulled By: sagar0
fbshipit-source-id: 9933685f943cf2547ed5c553f490035a2fa785cf
Summary:
Provide a block_align option in BlockBasedTableOptions to allow
alignment of SST file data blocks. This will avoid higher
IOPS/throughput load due to < 4KB data blocks spanning 2 4KB pages.
When this option is set to true, the block alignment is set to lower of
block size and 4KB.
Closes https://github.com/facebook/rocksdb/pull/3502
Differential Revision: D7400897
Pulled By: anand1976
fbshipit-source-id: 04cc3bd144e88e3431a4f97604e63ad7a0f06d44
Summary:
b555ed30a4 introduces a regression, which causes blocks always to be pinned in block based iterators. Fix it.
Closes https://github.com/facebook/rocksdb/pull/3582
Differential Revision: D7189534
Pulled By: siying
fbshipit-source-id: 117dc7a03d0a0e360424db02efb366e12da2be03
Summary:
In attempting to build a static lib for use in iOS, I ran in to lots of type errors between uint64_t and size_t. This PR contains the changes I made to get `TARGET_OS=IOS make static_lib` to succeed while also getting Xcode to build successfully with the resulting `librocksdb.a` library imported.
This also compiles for me on macOS and tests fine, but I'm really not sure if I made the correct decisions about where to `static_cast` and where to change types.
Also up for discussion: is iOS worth supporting? Getting the static lib is just part one, we aren't providing any bridging headers or wrappers like the ObjectiveRocks project, it won't be a great experience.
Closes https://github.com/facebook/rocksdb/pull/3503
Differential Revision: D7106457
Pulled By: gfosco
fbshipit-source-id: 82ac2073de7e1f09b91f6b4faea91d18bd311f8e
Summary:
- removed a few unneeded variables
- fused some variable declarations and their assignments
- fixed right-trimming code in string_util.cc to not underflow
- simplifed an assertion
- move non-nullptr check assertion before dereferencing of that pointer
- pass an std::string function parameter by const reference instead of by value (avoiding potential copy)
Closes https://github.com/facebook/rocksdb/pull/3507
Differential Revision: D7004679
Pulled By: sagar0
fbshipit-source-id: 52944952d9b56dfcac3bea3cd7878e315bb563c4
Summary:
Use a customzied BlockBasedTableIterator and LevelIterator to replace current implementations leveraging two-level-iterator. Hope the customized logic will make code easier to understand. As a side effect, BlockBasedTableIterator reduces the allocation for the data block iterator object, and avoid the virtual function call to it, because we can directly reference BlockIter, a final class. Similarly, LevelIterator reduces virtual function call to the dummy iterator iterating the file metadata. It also enabled further optimization.
The upper bound check is also moved from index block to data block. This implementation fits this iterator better. After the change, forwared iterator is slightly optimized to ensure we trim those iterators.
The two-level-iterator now is only used by partitioned index, so it is simplified.
Closes https://github.com/facebook/rocksdb/pull/3406
Differential Revision: D6809041
Pulled By: siying
fbshipit-source-id: 7da3b9b1d3c8e9d9405302c15920af1fcaf50ffa
Sagar Vemuri