Summary:
**Context**
`Options::track_and_verify_wals_in_manifest = true` verifies each of the WALs tracked in manifest indeed presents in the WAL folder. If not, a corruption "Missing WAL with log number" will be thrown.
`DB::SyncWAL()` called at a specific timing (i.e, at the `TEST_SYNC_POINT("FindObsoleteFiles::PostMutexUnlock")`) can record in a new manifest the WAL addition of a WAL file that already had a WAL deletion recorded in the previous manifest.
And the WAL deletion record is not rollover-ed to the new manifest. So the new manifest creates the illusion of such WAL never gets deleted and should presents at db re/open.
- Such WAL deletion record can be caused by flushing the memtable associated with that WAL and such WAL deletion can actually happen in` PurgeObsoleteFiles()`.
As a consequence, upon `DB::Reopen()`, this WAL file can be deleted while manifest still has its WAL addition record , which causes a false alarm of corruption "Missing WAL with log number" to be thrown.
**Summary**
This PR fixes this false alarm by rolling over the WAL deletion record from prev manifest to the new manifest by adding the WAL deletion record to the new manifest.
**Test**
- Make check
- Added new unit test `TEST_F(DBWALTest, FixSyncWalOnObseletedWalWithNewManifestCausingMissingWAL)` that failed before the fix and passed after
- [Ongoing]CI stress test + aggressive value as in https://github.com/facebook/rocksdb/pull/10761 , which is how this false alarm was first surfaced, to confirm such false alarm disappears
- [Ongoing]Regular CI stress test to confirm such fix didn't harm anything
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10892
Reviewed By: ajkr
Differential Revision: D40778965
Pulled By: hx235
fbshipit-source-id: a512364bfdeb0b1a55c171890e60d856c528f37f
Summary:
**Context/Summary:**
This reverts commit fc74abb436 and related HISTORY record.
The issue with PR 10777 or general approach using earliest_mem_seqno like https://github.com/facebook/rocksdb/pull/5958#issue-511150930 is that the earliest seqno of memtable of each CFs does not get persisted and will always start with 0 upon Recover(). Later when creating a new memtable in certain CF, we use the last seqno of the whole DB (but not of that CF from previous DB session) for this CF. This will lead to false positive overlapping seqno and PR 10777 will throw something like https://github.com/facebook/rocksdb/blob/main/db/compaction/compaction_picker.cc#L1002-L1004
Luckily a more elegant and complete solution to the overlapping seqno problem these PR aim to solve does not have above problem, see https://github.com/facebook/rocksdb/pull/10922. It is already being pursued and in the process of review. So we can just revert this PR and focus on getting PR10922 to land.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10999
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D41572604
Pulled By: hx235
fbshipit-source-id: 9d9bdf594abd235e2137045cef513ca0b14e0a3a
Summary:
Currently, `iterate_upper_bound` is not checked for range tombstone keys in MergingIterator. This may impact performance when there is a large number of range tombstones right after `iterate_upper_bound`. This PR fixes this issue by checking `iterate_upper_bound` in MergingIterator for range tombstone keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10966
Test Plan:
- added unit test
- stress test: `python3 tools/db_crashtest.py whitebox --simple --verify_iterator_with_expected_state_one_in=5 --delrangepercent=5 --prefixpercent=18 --writepercent=48 --readpercen=15 --duration=36000 --range_deletion_width=100`
- ran different stress tests over sandcastle
- Falcon team ran some test traffic and saw reduced CPU usage on processing range tombstones.
Reviewed By: ajkr
Differential Revision: D41414172
Pulled By: cbi42
fbshipit-source-id: 9b2c29eb3abb99327c6a649bdc412e70d863f981
Summary:
The check for SST unique IDs added to best-efforts recovery (`Options::best_efforts_recovery` is true).
With best_efforts_recovery being true, RocksDB will recover to the latest point in
MANIFEST such that all valid SST files included up to this point pass unique ID checks as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10962
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D41378241
Pulled By: riversand963
fbshipit-source-id: a036064e2c17dec13d080a24ef2a9f85d607b16c
Summary:
Can simplify some ugly code in cache_dump_load_impl.cc by having an API in SecondaryCache that can directly consume persisted data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10945
Test Plan: existing tests for CacheDumper, added basic unit test
Reviewed By: anand1976
Differential Revision: D41231497
Pulled By: pdillinger
fbshipit-source-id: b8ec993ef7d3e7efd68aae8602fd3f858da58068
Summary:
We were not resetting it in non-debug mode so it could be true once and then stay true for future keys where it should be false. This PR adds the reset logic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10967
Test Plan:
- built `db_bench` with DEBUG_LEVEL=0
- ran benchmark: `TEST_TMPDIR=/dev/shm/prefix ./db_bench -benchmarks=fillrandom -compaction_style=1 -preserve_internal_time_seconds=100 -preclude_last_level_data_seconds=10 -write_buffer_size=1048576 -target_file_size_base=1048576 -subcompactions=8 -duration=120`
- compared "output_to_penultimate_level: X bytes + last: Y bytes" lines in LOG output
- Before this fix, Y was always zero
- After this fix, Y gradually increased throughout the benchmark
Reviewed By: riversand963
Differential Revision: D41417726
Pulled By: ajkr
fbshipit-source-id: ace1e9a289e751a5b0c2fbaa8addd4eda5525329
Summary:
Background. One of the core risks of chosing HyperClockCache is ending up with degraded performance if estimated_entry_charge is very significantly wrong. Too low leads to under-utilized hash table, which wastes a bit of (tracked) memory and likely increases access times due to larger working set size (more TLB misses). Too high leads to fully populated hash table (at some limit with reasonable lookup performance) and not being able to cache as many objects as the memory limit would allow. In either case, performance degradation is graceful/continuous but can be quite significant. For example, cutting block size in half without updating estimated_entry_charge could lead to a large portion of configured block cache memory (up to roughly 1/3) going unused.
Fix. This change adds a mechanism through which the DB periodically probes the block cache(s) for "problems" to report, and adds diagnostics to the HyperClockCache for bad estimated_entry_charge. The periodic probing is currently done with DumpStats / stats_dump_period_sec, and diagnostics reported to info_log (normally LOG file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10965
Test Plan:
unit test included. Doesn't cover all the implemented subtleties of reporting, but ensures basics of when to report or not.
Also manual testing with db_bench. Create db with
```
./db_bench --benchmarks=fillrandom,flush --num=3000000 --disable_wal=1
```
Use and check LOG file for HyperClockCache for various block sizes (used as estimated_entry_charge)
```
./db_bench --use_existing_db --benchmarks=readrandom --num=3000000 --duration=20 --stats_dump_period_sec=8 --cache_type=hyper_clock_cache -block_size=XXXX
```
Seeing warnings / errors or not as expected.
Reviewed By: anand1976
Differential Revision: D41406932
Pulled By: pdillinger
fbshipit-source-id: 4ca56162b73017e4b9cec2cad74466f49c27a0a7
Summary:
After a couple minor bug fixes and successful productions roll-outs in a few places, I think we can mark this as production-ready. It has a clear value proposition for many workloads, even if we don't have clear advice for every workload yet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10963
Test Plan: existing tests, comment changes only
Reviewed By: siying
Differential Revision: D41384083
Pulled By: pdillinger
fbshipit-source-id: 56359f01a57bb28de8697666b342382fac72ce6d
Summary:
Add stats for time spent in the ReadAsync call, and async read errors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10947
Test Plan: Run db_bench and look at stats
Reviewed By: akankshamahajan15
Differential Revision: D41236637
Pulled By: anand1976
fbshipit-source-id: 70539b69a28491d57acead449436a761f7108acf
Summary:
Compressed block cache depends on reading the block compression marker beyond the payload block size. Only the payload bytes were being saved and loaded from SecondaryCache -> boom!
This removes some unnecessary code attempting to combine these two competing features. Note that BlockContents was previously used for block-based filter in block cache, but that support has been removed.
Also marking block_cache_compressed as deprecated in this commit as we expect it to be replaced with SecondaryCache.
This problem was discovered during refactoring but didn't want to combine bug fix with that refactoring.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10944
Test Plan: test added that fails on base revision (at least with ASAN)
Reviewed By: akankshamahajan15
Differential Revision: D41205578
Pulled By: pdillinger
fbshipit-source-id: 1b29d36c7a6552355ac6511fcdc67038ef4af29f
Summary:
The patch fixes a bug where `GetContext::Merge` (and `MergeEntity`) does not update the ticker `READ_NUM_MERGE_OPERANDS` because it implicitly uses the default parameter value of `update_num_ops_stats=false` when calling `MergeHelper::TimedFullMerge`. Also, to prevent such issues going forward, the PR removes the default parameter values from the `TimedFullMerge` methods. In addition, it removes an unused/unnecessary parameter from `TimedFullMergeWithEntity`, and does some cleanup at the call sites of these methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10925
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D41096453
Pulled By: ltamasi
fbshipit-source-id: fc60646d32b4d516b8fe81e265c3f020a32fd7f8
Summary:
Prevents `MemTableList::PickMemtablesToFlush()` from picking non-consecutive memtables. It leads to wrong ordering in L0 if the files are committed, or an error like below if force_consistency_checks=true catches it:
```
Corruption: force_consistency_checks: VersionBuilder: L0 file https://github.com/facebook/rocksdb/issues/25 with seqno 320416 368066 vs. file https://github.com/facebook/rocksdb/issues/24 with seqno 336037 352068
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10921
Test Plan: fix the expectation in the existing test of this behavior
Reviewed By: riversand963
Differential Revision: D41046935
Pulled By: ajkr
fbshipit-source-id: 783696bff56115063d5dc5856dfaed6a9881d1ab
Summary:
Fix memory corruption error in scans if async_io is enabled. Memory corruption happened if data is overlapping between two buffers. If there is IOError while reading the data, it leads to empty buffer and other buffer already in progress of async read goes again for reading causing the error.
Fix: Added check to abort IO in second buffer if curr_ got empty.
This PR also fixes db_stress failures which happened when buffers are not aligned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10890
Test Plan:
- Ran make crash_test -j32 with async_io enabled.
- Ran benchmarks to make sure there is no regression.
Reviewed By: anand1976
Differential Revision: D40881731
Pulled By: akankshamahajan15
fbshipit-source-id: 39fcf2134c7b1bbb08415ede3e1ef261ac2dbc58
Summary:
This PR implements the originally disabled `Merge()` APIs when user-defined timestamp is enabled.
Simplest usage:
```cpp
// assume string append merge op is used with '.' as delimiter.
// ts1 < ts2
db->Put(WriteOptions(), "key", ts1, "v0");
db->Merge(WriteOptions(), "key", ts2, "1");
ReadOptions ro;
ro.timestamp = &ts2;
db->Get(ro, "key", &value);
ASSERT_EQ("v0.1", value);
```
Some code comments are added for clarity.
Note: support for timestamp in `DB::GetMergeOperands()` will be done in a follow-up PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10819
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D40603195
Pulled By: riversand963
fbshipit-source-id: f96d6f183258f3392d80377025529f7660503013
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/10777 mistakenly added a history entry under 7.8 release but the PR is not included in 7.8. This mistake was due to rebase and merge didn't realize it was a conflict when "## Unreleased" was changed to "## 7.8.0 (10/22/2022)".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10898
Test Plan: Make check
Reviewed By: akankshamahajan15
Differential Revision: D40861001
Pulled By: hx235
fbshipit-source-id: b2310c95490f6ebb90834a210c965a74c9560b51
Summary:
When there is a column family that doesn't get any traffic, its stats are still dumped when options.options.stats_dump_period_sec triggers. This sometimes spam the information logs. With this change, we skip the printing if there is not change, until 8 periods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10891
Test Plan: Manually test the behavior with hacked db_bench setups.
Reviewed By: jay-zhuang
Differential Revision: D40777183
fbshipit-source-id: ef0b9a793e4f6282df099b464f01d1fb4c5a2cab
Summary:
Right now in MergingIterator, for each range tombstone start and end key, we pop one end from heap and push the other end into the heap. This involves extra downheap and upheap cost. In the likely cases when a range tombstone iterator emits relatively adjacent keys, these keys should have similar order within all keys in the heap. This can happen when there is a burst of consecutive range tombstones, and most of the keys covered by them are dropped already. This PR uses `replace_top()` when inserting new range tombstone keys, which is more efficient in these common cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10877
Test Plan:
- existing UT
- ran all flavors of stress test through sandcastle
- benchmark:
```
# Set up: --writes_per_range_tombstone=1 means one point write and one delete range
TEST_TMPDIR=/tmp/rocksdb-rangedel-test-all-tombstone ./db_bench --benchmarks=fillseq,levelstats --writes_per_range_tombstone=1 --max_num_range_tombstones=1000000 --range_tombstone_width=2 --num=100000000 --writes=800000 --max_bytes_for_level_base=4194304 --disable_auto_compactions --write_buffer_size=33554432 --key_size=64
Level Files Size(MB)
--------------------
0 8 152
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
# Benchmark
TEST_TMPDIR=/tmp/rocksdb-rangedel-test-all-tombstone/ ./db_bench --benchmarks=readseq[-W1][-X5],levelstats --use_existing_db=true --cache_size=3221225472 --num=100000000 --reads=1000000 --disable_auto_compactions=true --avoid_flush_during_recovery=true
# Pre PR
readseq [AVG 5 runs] : 1432116 (± 59664) ops/sec; 224.0 (± 9.3) MB/sec
readseq [MEDIAN 5 runs] : 1454886 ops/sec; 227.5 MB/sec
# Post PR
readseq [AVG 5 runs] : 1944425 (± 29521) ops/sec; 304.1 (± 4.6) MB/sec
readseq [MEDIAN 5 runs] : 1959430 ops/sec; 306.5 MB/sec
```
Reviewed By: ajkr
Differential Revision: D40710936
Pulled By: cbi42
fbshipit-source-id: cb782fb9cdcd26c0c3eb9443215a4ef4d2f79022
Summary:
**Context:**
Same as https://github.com/facebook/rocksdb/pull/5958#issue-511150930 but apply the fix to FIFO Compaction case
Repro:
```
COERCE_CONTEXT_SWICH=1 make -j56 db_stress
./db_stress --acquire_snapshot_one_in=0 --adaptive_readahead=0 --allow_data_in_errors=True --async_io=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=18 --bottommost_compression_type=disable --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=1 --charge_table_reader=1 --checkpoint_one_in=0 --checksum_type=kCRC32c --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=0 --compact_range_one_in=1000 --compaction_pri=3 --open_files=-1 --compaction_style=2 --fifo_allow_compaction=1 --compaction_ttl=0 --compression_max_dict_buffer_bytes=8388607 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=zlib --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test0/rocksdb_crashtest_whitebox --db_write_buffer_size=8388608 --delpercent=4 --delrangepercent=1 --destroy_db_initially=1 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --fail_if_options_file_error=1 --file_checksum_impl=none --flush_one_in=1000 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=0 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=15 --index_type=3 --ingest_external_file_one_in=100 --initial_auto_readahead_size=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --log2_keys_per_lock=10 --long_running_snapshots=0 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=16384 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=100000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=1048576 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=4194304 --memtable_prefix_bloom_size_ratio=0.5 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --memtablerep=skip_list --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --num_levels=1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=32 --open_write_fault_one_in=0 --ops_per_thread=200000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=1 --pause_background_one_in=0 --periodic_compaction_seconds=0 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --progress_reports=0 --read_fault_one_in=0 --readahead_size=16384 --readpercent=45 --recycle_log_file_num=1 --reopen=20 --ribbon_starting_level=999 --snapshot_hold_ops=1000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --subcompactions=2 --sync=0 --sync_fault_injection=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=3 --unpartitioned_pinning=0 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=1 --use_merge=0 --use_multiget=1 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=0 --verify_db_one_in=1000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=zstd --write_buffer_size=524288 --write_dbid_to_manifest=0 --writepercent=35
put or merge error: Corruption: force_consistency_checks(DEBUG): VersionBuilder: L0 file https://github.com/facebook/rocksdb/issues/479 with seqno 23711 29070 vs. file https://github.com/facebook/rocksdb/issues/482 with seqno 27138 29049
```
**Summary:**
FIFO only does intra-L0 compaction in the following four cases. For other cases, FIFO drops data instead of compacting on data, which is irrelevant to the overlapping seqno issue we are solving.
- [FIFOCompactionPicker::PickSizeCompaction](https://github.com/facebook/rocksdb/blob/7.6.fb/db/compaction/compaction_picker_fifo.cc#L155) when `total size < compaction_options_fifo.max_table_files_size` and `compaction_options_fifo.allow_compaction == true`
- For this path, we simply reuse the fix in `FindIntraL0Compaction` https://github.com/facebook/rocksdb/pull/5958/files#diff-c261f77d6dd2134333c4a955c311cf4a196a08d3c2bb6ce24fd6801407877c89R56
- This path was not stress-tested at all. Therefore we covered `fifo.allow_compaction` in stress test to surface the overlapping seqno issue we are fixing here.
- [FIFOCompactionPicker::PickCompactionToWarm](https://github.com/facebook/rocksdb/blob/7.6.fb/db/compaction/compaction_picker_fifo.cc#L313) when `compaction_options_fifo.age_for_warm > 0`
- For this path, we simply replicate the idea in https://github.com/facebook/rocksdb/pull/5958#issue-511150930 and skip files of largest seqno greater than `earliest_mem_seqno`
- This path was not stress-tested at all. However covering `age_for_warm` option worths a separate PR to deal with db stress compatibility. Therefore we manually tested this path for this PR
- [FIFOCompactionPicker::CompactRange](https://github.com/facebook/rocksdb/blob/7.6.fb/db/compaction/compaction_picker_fifo.cc#L365) that ends up picking one of the above two compactions
- [CompactionPicker::CompactFiles](https://github.com/facebook/rocksdb/blob/7.6.fb/db/compaction/compaction_picker.cc#L378)
- Since `SanitizeCompactionInputFiles()` will be called [before](https://github.com/facebook/rocksdb/blob/7.6.fb/db/compaction/compaction_picker.h#L111-L113) `CompactionPicker::CompactFiles` , we simply replicate the idea in https://github.com/facebook/rocksdb/pull/5958#issue-511150930 in `SanitizeCompactionInputFiles()`. To simplify implementation, we return `Stats::Abort()` on encountering seqno-overlapped file when doing compaction to L0 instead of skipping the file and proceed with the compaction.
Some additional clean-up included in this PR:
- Renamed `earliest_memtable_seqno` to `earliest_mem_seqno` for consistent naming
- Added comment about `earliest_memtable_seqno` in related APIs
- Made parameter `earliest_memtable_seqno` constant and required
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10777
Test Plan:
- make check
- New unit test `TEST_P(DBCompactionTestFIFOCheckConsistencyWithParam, FlushAfterIntraL0CompactionWithIngestedFile)`corresponding to the above 4 cases, which will fail accordingly without the fix
- Regular CI stress run on this PR + stress test with aggressive value https://github.com/facebook/rocksdb/pull/10761 and on FIFO compaction only
Reviewed By: ajkr
Differential Revision: D40090485
Pulled By: hx235
fbshipit-source-id: 52624186952ee7109117788741aeeac86b624a4f
Summary:
Allow the last level only compaction able to output result to penultimate level if the penultimate level is empty. Which will also block the other compaction output to the penultimate level.
(it includes the PR https://github.com/facebook/rocksdb/issues/10829)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10822
Reviewed By: siying
Differential Revision: D40389180
Pulled By: jay-zhuang
fbshipit-source-id: 4e5dcdce307795b5e07b5dd1fa29dd75bb093bad
Summary:
Right now UserComparatorWrapper is a Customizable object, although it is not, which introduces some intialization overhead for the object. In some benchmarks, it shows up in CPU profiling. Make it not configurable by defining most functions needed by UserComparatorWrapper to an interface and implement the interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10837
Test Plan: Make sure existing tests pass
Reviewed By: pdillinger
Differential Revision: D40528511
fbshipit-source-id: 70eaac89ecd55401a26e8ed32abbc413a9617c62
Summary:
Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter.
`DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`.
New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer.
This same philosophy can be applied to KV and IO tracing as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811
Test Plan:
existing unit tests
Old API DB::StartBlockTrace checked with db_bench tool
create database
```
./db_bench --benchmarks="fillseq" \
--key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \
--cache_index_and_filter_blocks --cache_size=1048576 \
--disable_auto_compactions=1 --disable_wal=1 --compression_type=none \
--min_level_to_compress=-1 --compression_ratio=1 --num=10000000
```
To trace block cache accesses when running readrandom benchmark:
```
./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \
--key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \
--cache_index_and_filter_blocks --cache_size=1048576 \
--disable_auto_compactions=1 --disable_wal=1 --compression_type=none \
--min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \
--threads=16 \
-block_cache_trace_file="/tmp/binary_trace_test_example" \
-block_cache_trace_max_trace_file_size_in_bytes=1073741824 \
-block_cache_trace_sampling_frequency=1
```
Reviewed By: anand1976
Differential Revision: D40435289
Pulled By: akankshamahajan15
fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
Summary:
This new property allows users to trigger the background block cache stats collection mode through the `GetProperty()` and `GetMapProperty()` APIs. The background mode has much lower overhead at the expense of returning stale values in more cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10832
Test Plan: updated unit test
Reviewed By: pdillinger
Differential Revision: D40497883
Pulled By: ajkr
fbshipit-source-id: bdcc93402f426463abb2153756aad9e295447343
Summary:
FIFO compaction can theoretically open a DB with any compaction style.
However, the current code only allows FIFO compaction to open a DB with
a single level.
This PR relaxes the limitation of FIFO compaction and allows it to open a
DB with multiple levels. Below is the read / write / compaction behavior:
* The read behavior is untouched, and it works like a regular rocksdb instance.
* The write behavior is untouched as well. When a FIFO compacted DB
is opened with multiple levels, all new files will still be in level 0, and no files
will be moved to a different level.
* Compaction logic is extended. It will first identify the bottom-most non-empty level.
Then, it will delete the oldest file in that level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10348
Test Plan:
Added a new test to verify the migration from level to FIFO where the db has multiple levels.
Extended existing test cases in db_test and db_basic_test to also verify
all entries of a key after reopening the DB with FIFO compaction.
Reviewed By: jay-zhuang
Differential Revision: D40233744
fbshipit-source-id: 6cc011d6c3467e6bfb9b6a4054b87619e69815e1
Summary:
Lock the penultimate level for the whole compaction inputs range, so any
key in that compaction is safe to move up from the last level to
penultimate level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10782
Reviewed By: siying
Differential Revision: D40231540
Pulled By: siying
fbshipit-source-id: ca115cc8b4018b35d797329fa85a19b06cc8c13e
Summary:
This change is motivated by ensuring that `ldb update_manifest` or `UpdateManifestForFilesState` can run without expecting files to open when the old temperature is provided (in case the FileSystem strictly interprets non-kUnknown), but ended up fixing a problem in `OfflineManifestWriter` (used by `ldb unsafe_remove_sst_file`) where it would open some SST files during recovery and expect them to match the prior manifest state, even if not required by the intended new state.
Also update BackupEngine to retry with Temperature kUnknown when reading file with potentially "wrong" temperature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10796
Test Plan: tests added/updated, that fail before the change(s) and now pass
Reviewed By: jay-zhuang
Differential Revision: D40232645
Pulled By: jay-zhuang
fbshipit-source-id: b5aa2688aecfe0c320b80a7da689b315414c20be
Summary:
Provide support for async_io if ReadOptions.tailing is set true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10781
Test Plan:
- Update unit tests
- Ran db_bench: ./db_bench --benchmarks="readrandom" --use_existing_db --use_tailing_iterator=1 --async_io=1
Reviewed By: anand1976
Differential Revision: D40128882
Pulled By: anand1976
fbshipit-source-id: 55e17855536871a5c47e2de92d238ae005c32d01
Summary:
Add option `preserve_internal_time_seconds` to preserve the internal
time information.
It's mostly for the migration of the existing data to tiered storage (
`preclude_last_level_data_seconds`). When the tiering feature is just
enabled, the existing data won't have the time information to decide if
it's hot or cold. Enabling this feature will start collect and preserve
the time information for the new data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10747
Reviewed By: siying
Differential Revision: D39910141
Pulled By: siying
fbshipit-source-id: 25c21638e37b1a7c44006f636b7d714fe7242138
Summary:
We have seen some rare crash test failures in HyperClockCache, and the source could certainly be a bug fixed in this change, in ClockHandleTable::ConstApplyToEntriesRange. It wasn't properly accounting for the fact that incrementing the acquire counter could be ineffective, due to parallel updates. (When incrementing the acquire counter is ineffective, it is incorrect to then decrement it.)
This change includes some other minor clean-up in HyperClockCache, and adds stats_dump_period_sec with a much lower period to the crash test. This should be the primary caller of ApplyToEntries, in collecting cache entry stats.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10768
Test Plan: haven't been able to reproduce the failure, but should be in a better state (bug fix and improved crash test)
Reviewed By: anand1976
Differential Revision: D40034747
Pulled By: anand1976
fbshipit-source-id: a06fcefe146e17ee35001984445cedcf3b63eb68
Summary:
With current implementation, within the same RocksDB instance, all column families with non-empty memtables will be scheduled for flush if RocksDB determines that any column family needs to be flushed, e.g. memtable full, write buffer manager, etc., if atomic flush is enabled. Not doing so can lead to data loss and inconsistency when WAL is disabled, which is a common setting when atomic flush is enabled. Therefore, setting a per-column-family knob, min_write_buffer_number_to_merge to a value greater than 1 is not compatible with atomic flush, and should be sanitized during column family creation and db open.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10773
Test Plan:
Reproduce: D39993203 has detailed steps.
Run the test with and without the fix.
Reviewed By: cbi42
Differential Revision: D40077955
Pulled By: cbi42
fbshipit-source-id: 451a9179eb531ac42eaccf40b451b9dec4085240
Summary:
fix for https://github.com/facebook/rocksdb/issues/10752 where RocksDB could be in an infinite compaction loop (with compaction reason kBottommostFiles) if allow_ingest_behind is enabled and the bottommost level is unfilled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10767
Test Plan: Added a unit test to reproduce the compaction loop.
Reviewed By: ajkr
Differential Revision: D40031861
Pulled By: ajkr
fbshipit-source-id: 71c4b02931fbe507a847632905404c9b8fa8c96b
Summary:
Fix a bug in Iterator::Refresh() where the local SV it obtained could be obsolete upon return, and should be cleaned up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10770
Test Plan: added a unit test to reproduce the issue.
Reviewed By: ajkr
Differential Revision: D40063809
Pulled By: ajkr
fbshipit-source-id: 619e728eb0f1ac9540b4d0ad38e43acc37a514b2
Summary:
When `FlushOptions::wait` is set to false, manual flush should not stall forever.
If the database has already stopped writes, then the thread calling `DB::Flush()` with
`FlushOptions::wait=false` should not enter the `DBImpl::write_thread_`.
To prevent this, we should do a check at the beginning and return `TryAgain()`
Resolves: https://github.com/facebook/rocksdb/issues/9892
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10001
Reviewed By: siying
Differential Revision: D36422303
Pulled By: siying
fbshipit-source-id: 723bd3065e8edc4f17c82449d0d6b95a2381ac0a
Summary:
For RoundRobin compaction, the data should be mostly sorted per level and within level. Use normal compaction picker for RR until all expired data is compacted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10725
Reviewed By: ajkr
Differential Revision: D39771069
Pulled By: jay-zhuang
fbshipit-source-id: 7ccf88d7c093fad5673bda73a7b08cc4757780cd
Summary:
Add new property "do_not_recurse" in IOOptions for underlying file system to skip iteration of directories during DB::Open if there are no sub directories and list only files.
By default this property is set to false. This property is set true currently in the code where RocksDB is sure only files are needed during DB::Open.
Provided support in PosixFileSystem to use "do_not_recurse".
TestPlan:
- Existing tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10668
Reviewed By: anand1976
Differential Revision: D39471683
Pulled By: akankshamahajan15
fbshipit-source-id: 90e32f0b86d5346d53bc2714d3a0e7002590527f
Summary:
Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are
- internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps.
- Garbage collection of range tombstones and range tombstone covered keys during compaction.
- Get()/MultiGet() to return the timestamp of a range tombstone when needed.
- Get/Iterator with range tombstones bounded by readoptions.timestamp.
- timestamp crash test now issues DeleteRange by default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661
Test Plan:
- Added unit test: `make check`
- Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`
- Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case.
| micros/op | fillrandom | seekrandom |
| --- | --- | --- |
|main| 2.58 |10.96|
|PR 10661| 2.68 |10.63|
Reviewed By: riversand963
Differential Revision: D39441192
Pulled By: cbi42
fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2
Summary:
Try to align the compaction output file boundaries to the next level ones
(grandparent level), to reduce the level compaction write-amplification.
In level compaction, there are "wasted" data at the beginning and end of the
output level files. Align the file boundary can avoid such "wasted" compaction.
With this PR, it tries to align the non-bottommost level file boundaries to its
next level ones. It may cut file when the file size is large enough (at least
50% of target_file_size) and not too large (2x target_file_size).
db_bench shows about 12.56% compaction reduction:
```
TEST_TMPDIR=/data/dbbench2 ./db_bench --benchmarks=fillrandom,readrandom -max_background_jobs=12 -num=400000000 -target_file_size_base=33554432
# baseline:
Flush(GB): cumulative 25.882, interval 7.216
Cumulative compaction: 285.90 GB write, 162.36 MB/s write, 269.68 GB read, 153.15 MB/s read, 2926.7 seconds
# with this change:
Flush(GB): cumulative 25.882, interval 7.753
Cumulative compaction: 249.97 GB write, 141.96 MB/s write, 233.74 GB read, 132.74 MB/s read, 2534.9 seconds
```
The compaction simulator shows a similar result (14% with 100G random data).
As a side effect, with this PR, the SST file size can exceed the
target_file_size, but is capped at 2x target_file_size. And there will be
smaller files. Here are file size statistics when loading 100GB with the target
file size 32MB:
```
baseline this_PR
count 1.656000e+03 1.705000e+03
mean 3.116062e+07 3.028076e+07
std 7.145242e+06 8.046139e+06
```
The feature is enabled by default, to revert to the old behavior disable it
with `AdvancedColumnFamilyOptions.level_compaction_dynamic_file_size = false`
Also includes https://github.com/facebook/rocksdb/issues/1963 to cut file before skippable grandparent file. Which is for
use case like user adding 2 or more non-overlapping data range at the same
time, it can reduce the overlapping of 2 datasets in the lower levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10655
Reviewed By: cbi42
Differential Revision: D39552321
Pulled By: jay-zhuang
fbshipit-source-id: 640d15f159ab0cd973f2426cfc3af266fc8bdde2
Summary:
when a new internal iterator is constructed during iterator refresh, pointer to the previous memtable range tombstone iterator was not cleared. This could cause segfault for future `Refresh()` calls when they try to free the memtable range tombstones. This PR fixes this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10739
Test Plan: added a unit test in db_range_del_test.cc to reproduce this issue.
Reviewed By: ajkr, riversand963
Differential Revision: D39825283
Pulled By: cbi42
fbshipit-source-id: 3b59a2b73865aed39e28cdd5c1b57eed7991b94c
Summary:
Update io_uring_prep_cancel as it is now backward compatible.
Also, io_uring_prep_cancel expects sqe->addr to match with read
request submitted. It's being set wrong which is now fixed in this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10644
Test Plan:
- Ran internally with lastest liburing package and on RocksDB
github repo with older version.
- Ran seekrandom regression to confirm there is no regression.
Reviewed By: anand1976
Differential Revision: D39284229
Pulled By: akankshamahajan15
fbshipit-source-id: fd52cdf23d676da114896163626b75c8ae09c980
Summary:
This PR bumps up version number from 7.7 to 7.8 in main branch, indicating that next release will be 7.8. We are going to release 7.7 soon. Since 7.7.fb branch has been created, we can land this to main.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10694
Reviewed By: gitbw95
Differential Revision: D39581577
Pulled By: riversand963
fbshipit-source-id: 84f3fecf25fd9ac96e46b4cd6d50ddb6edc89427
Summary:
`enable_custom_split_merge` is added for enabling the custom split and merge feature, which split the compressed value into chunks so that they may better fit jemalloc bins.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10690
Test Plan:
Unit Tests
Stress Tests
Reviewed By: anand1976
Differential Revision: D39567604
Pulled By: gitbw95
fbshipit-source-id: f6d1d46200f365220055f793514601dcb0edc4b7
Summary:
This change establishes a distinctive name for the experimental new lock-free clock cache (originally developed by guidotag and revamped in PR https://github.com/facebook/rocksdb/issues/10626). A few reasons:
* We want to make it clear that this is a fundamentally different implementation vs. the old clock cache, to avoid people saying "I already tried clock cache."
* We want to highlight the key feature: it's fast (especially under parallel load)
* Because it requires an estimated charge per entry, it is not drop-in API compatible with old clock cache. This estimate might always be required for highest performance, and giving it a distinct name should reduce confusion about the distinct API requirements.
* We might develop a variant requiring the same estimate parameter but with LRU eviction. In that case, using the name HyperLRUCache should make things more clear. (FastLRUCache is just a prototype that might soon be removed.)
Some API detail:
* To reduce copy-pasting parameter lists, etc. as in LRUCache construction, I have a `MakeSharedCache()` function on `HyperClockCacheOptions` instead of `NewHyperClockCache()`.
* Changes -cache_type=clock_cache to -cache_type=hyper_clock_cache for applicable tools. I think this is more consistent / sustainable for reasons already stated.
For performance tests see https://github.com/facebook/rocksdb/pull/10626
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10684
Test Plan: no interesting functional changes; tests updated
Reviewed By: anand1976
Differential Revision: D39547800
Pulled By: pdillinger
fbshipit-source-id: 5c0fe1b5cf3cb680ab369b928c8569682b9795bf
Summary:
The stats were not accurate for the coroutine version of MultiGet. This PR fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10673
Reviewed By: akankshamahajan15
Differential Revision: D39492615
Pulled By: anand1976
fbshipit-source-id: b46c04e15ea27e66f4c31f00c66497aa283bf9d3
Summary:
Change the ```ReadOptions.optimize_multiget_for_io``` flag to default on. It doesn't impact regular MultiGet users as its only applicable when ```ReadOptions.async_io``` is also set to true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10671
Reviewed By: akankshamahajan15
Differential Revision: D39477439
Pulled By: anand1976
fbshipit-source-id: 47abcdbfa69f9bc60422ab68a238b232e085d4ba
Summary:
Each read from memtable used to read and fragment all the range tombstones into a `FragmentedRangeTombstoneList`. https://github.com/facebook/rocksdb/issues/10380 improved the inefficient here by caching a `FragmentedRangeTombstoneList` with each immutable memtable. This PR extends the caching to mutable memtables. The fragmented range tombstone can be constructed in either read (This PR) or write path (https://github.com/facebook/rocksdb/issues/10584). With both implementation, each `DeleteRange()` will invalidate the cache, and the difference is where the cache is re-constructed.`CoreLocalArray` is used to store the cache with each memtable so that multi-threaded reads can be efficient. More specifically, each core will have a shared_ptr to a shared_ptr pointing to the current cache. Each read thread will only update the reference count in its core-local shared_ptr, and this is only needed when reading from mutable memtables.
The choice between write path and read path is not an easy one: they are both improvement compared to no caching in the current implementation, but they favor different operations and could cause regression in the other operation (read vs write). The write path caching in (https://github.com/facebook/rocksdb/issues/10584) leads to a cleaner implementation, but I chose the read path caching here to avoid significant regression in write performance when there is a considerable amount of range tombstones in a single memtable (the number from the benchmark below suggests >1000 with concurrent writers). Note that even though the fragmented range tombstone list is only constructed in `DeleteRange()` operations, it could block other writes from proceeding, and hence affects overall write performance.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10547
Test Plan:
- TestGet() in stress test is updated in https://github.com/facebook/rocksdb/issues/10553 to compare Get() result against expected state: `./db_stress_branch --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`
- Perf benchmark: tested read and write performance where a memtable has 0, 1, 10, 100 and 1000 range tombstones.
```
./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=200000 --reads=100000 --disable_auto_compactions --max_num_range_tombstones=1000
```
Write perf regressed since the cost of constructing fragmented range tombstone list is shifted from every read to a single write. 6cbe5d8e172dc5f1ef65c9d0a6eedbd9987b2c72 is included in the last column as a reference to see performance impact on multi-thread reads if `CoreLocalArray` is not used.
micros/op averaged over 5 runs: first 4 columns are for fillrandom, last 4 columns are for readrandom.
| |fillrandom main | write path caching | read path caching |memtable V3 (https://github.com/facebook/rocksdb/issues/10308) | readrandom main | write path caching | read path caching |memtable V3 |
|--- |--- |--- |--- |--- | --- | --- | --- | --- |
| 0 |6.35 |6.15 |5.82 |6.12 |2.24 |2.26 |2.03 |2.07 |
| 1 |5.99 |5.88 |5.77 |6.28 |2.65 |2.27 |2.24 |2.5 |
| 10 |6.15 |6.02 |5.92 |5.95 |5.15 |2.61 |2.31 |2.53 |
| 100 |5.95 |5.78 |5.88 |6.23 |28.31 |2.34 |2.45 |2.94 |
| 100 25 threads |52.01 |45.85 |46.18 |47.52 |35.97 |3.34 |3.34 |3.56 |
| 1000 |6.0 |7.07 |5.98 |6.08 |333.18 |2.86 |2.7 |3.6 |
| 1000 25 threads |52.6 |148.86 |79.06 |45.52 |473.49 |3.66 |3.48 |4.38 |
- Benchmark performance of`readwhilewriting` from https://github.com/facebook/rocksdb/issues/10552, 100 range tombstones are written: `./db_bench --benchmarks=readwhilewriting --writes_per_range_tombstone=500 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=100000 --reads=500000 --disable_auto_compactions --max_num_range_tombstones=10000 --finish_after_writes`
readrandom micros/op:
| |main |write path caching |read path caching |memtable V3 |
|---|---|---|---|---|
| single thread |48.28 |1.55 |1.52 |1.96 |
| 25 threads |64.3 |2.55 |2.67 |2.64 |
Reviewed By: ajkr
Differential Revision: D38895410
Pulled By: cbi42
fbshipit-source-id: 930bfc309dd1b2f4e8e9042f5126785bba577559
Summary:
Although we've been tracking SST unique IDs in the DB manifest
unconditionally, checking has been opt-in and with an extra pass at DB::Open
time. This changes the behavior of `verify_sst_unique_id_in_manifest` to
check unique ID against manifest every time an SST file is opened through
table cache (normal DB operations), replacing the explicit pass over files
at DB::Open time. This change also enables the option by default and
removes the "EXPERIMENTAL" designation.
One possible criticism is that the option no longer ensures the integrity
of a DB at Open time. This is far from an all-or-nothing issue. Verifying
the IDs of all SST files hardly ensures all the data in the DB is readable.
(VerifyChecksum is supposed to do that.) Also, with
max_open_files=-1 (default, extremely common), all SST files are
opened at DB::Open time anyway.
Implementation details:
* `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass
that is now removed.
* Unit tests that manipulate/corrupt table properties have to opt out of
this check, because that corrupts the "actual" unique id. (And even for
testing we don't currently have a mechanism to set "no unique id"
in the in-memory file metadata for new files.)
* A lot of other unit test churn relates to (a) default checking on, and
(b) checking on SST open even without DB::Open (e.g. on flush)
* Use `FileMetaData` for more `TableCache` operations (in place of
`FileDescriptor`) so that we have access to the unique_id whenever
we might need to open an SST file. **There is the possibility of
performance impact because we can no longer use the more
localized `fd` part of an `FdWithKeyRange` but instead follow the
`file_metadata` pointer. However, this change (possible regression)
is only done for `GetMemoryUsageByTableReaders`.**
* Removed a completely unnecessary constructor overload of
`TableReaderOptions`
Possible follow-up:
* Verification only happens when opening through table cache. Are there
more places where this should happen?
* Improve error message when there is a file size mismatch vs. manifest
(FIXME added in the appropriate place).
* I'm not sure there's a justification for `FileDescriptor` to be distinct from
`FileMetaData`.
* I'm skeptical that `FdWithKeyRange` really still makes sense for
optimizing some data locality by duplicating some data in memory, but I
could be wrong.
* An unnecessary overload of NewTableReader was recently added, in
the public API nonetheless (though unusable there). It should be cleaned
up to put most things under `TableReaderOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532
Test Plan:
updated unit tests
Performance test showing no significant difference (just noise I think):
`./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000`
Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec
After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec
Reviewed By: jay-zhuang
Differential Revision: D38765551
Pulled By: pdillinger
fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
Summary:
**Summary:**
When a block is firstly `Lookup` from the secondary cache, we just insert a dummy block in the primary cache (charging the actual size of the block) and don’t erase the block from the secondary cache. A standalone handle is returned from `Lookup`. Only if the block is hit again, we erase it from the secondary cache and add it into the primary cache.
When a block is firstly evicted from the primary cache to the secondary cache, we just insert a dummy block (size 0) in the secondary cache. When the block is evicted again, it is treated as a hot block and is inserted into the secondary cache.
**Implementation Details**
Add a new state of LRUHandle: The handle is never inserted into the LRUCache (both hash table and LRU list) and it doesn't experience the above three states. The entry can be freed when refs becomes 0. (refs >= 1 && in_cache == false && IS_STANDALONE == true)
The behaviors of `LRUCacheShard::Lookup()` are updated if the secondary_cache is CompressedSecondaryCache:
1. If a handle is found in primary cache:
1.1. If the handle's value is not nullptr, it is returned immediately.
1.2. If the handle's value is nullptr, this means the handle is a dummy one. For a dummy handle, if it was retrieved from secondary cache, it may still exist in secondary cache.
- 1.2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
- 1.2.2. If the handle from secondary cache is valid, erase it from the secondary cache and add it into the primary cache.
2. If a handle is not found in primary cache:
2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
2.2. If the handle from secondary cache is valid, insert a dummy block in the primary cache (charging the actual size of the block) and return a standalone handle.
The behaviors of `LRUCacheShard::Promote()` are updated as follows:
1. If `e->sec_handle` has value, one of the following steps can happen:
1.1. Insert a dummy handle and return a standalone handle to caller when `secondary_cache_` is `CompressedSecondaryCache` and e is a standalone handle.
1.2. Insert the item into the primary cache and return the handle to caller.
1.3. Exception handling.
3. If `e->sec_handle` has no value, mark the item as not in cache and charge the cache as its only metadata that'll shortly be released.
The behavior of `CompressedSecondaryCache::Insert()` is updated:
1. If a block is evicted from the primary cache for the first time, a dummy item is inserted.
4. If a dummy item is found for a block, the block is inserted into the secondary cache.
The behavior of `CompressedSecondaryCache:::Lookup()` is updated:
1. If a handle is not found or it is a dummy item, a nullptr is returned.
2. If `erase_handle` is true, the handle is erased.
The behaviors of `LRUCacheShard::Release()` are adjusted for the standalone handles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10527
Test Plan:
1. stress tests.
5. unit tests.
6. CPU profiling for db_bench.
Reviewed By: siying
Differential Revision: D38747613
Pulled By: gitbw95
fbshipit-source-id: 74a1eba7e1957c9affb2bd2ae3e0194584fa6eca
Summary:
Delete range logic is moved from `DBIter` to `MergingIterator`, and `MergingIterator` will seek to the end of a range deletion if possible instead of scanning through each key and check with `RangeDelAggregator`.
With the invariant that a key in level L (consider memtable as the first level, each immutable and L0 as a separate level) has a larger sequence number than all keys in any level >L, a range tombstone `[start, end)` from level L covers all keys in its range in any level >L. This property motivates optimizations in iterator:
- in `Seek(target)`, if level L has a range tombstone `[start, end)` that covers `target.UserKey`, then for all levels > L, we can do Seek() on `end` instead of `target` to skip some range tombstone covered keys.
- in `Next()/Prev()`, if the current key is covered by a range tombstone `[start, end)` from level L, we can do `Seek` to `end` for all levels > L.
This PR implements the above optimizations in `MergingIterator`. As all range tombstone covered keys are now skipped in `MergingIterator`, the range tombstone logic is removed from `DBIter`. The idea in this PR is similar to https://github.com/facebook/rocksdb/issues/7317, but this PR leaves `InternalIterator` interface mostly unchanged. **Credit**: the cascading seek optimization and the sentinel key (discussed below) are inspired by [Pebble](https://github.com/cockroachdb/pebble/blob/master/merging_iter.go) and suggested by ajkr in https://github.com/facebook/rocksdb/issues/7317. The two optimizations are mostly implemented in `SeekImpl()/SeekForPrevImpl()` and `IsNextDeleted()/IsPrevDeleted()` in `merging_iterator.cc`. See comments for each method for more detail.
One notable change is that the minHeap/maxHeap used by `MergingIterator` now contains range tombstone end keys besides point key iterators. This helps to reduce the number of key comparisons. For example, for a range tombstone `[start, end)`, a `start` and an `end` `HeapItem` are inserted into the heap. When a `HeapItem` for range tombstone start key is popped from the minHeap, we know this range tombstone becomes "active" in the sense that, before the range tombstone's end key is popped from the minHeap, all the keys popped from this heap is covered by the range tombstone's internal key range `[start, end)`.
Another major change, *delete range sentinel key*, is made to `LevelIterator`. Before this PR, when all point keys in an SST file are iterated through in `MergingIterator`, a level iterator would advance to the next SST file in its level. In the case when an SST file has a range tombstone that covers keys beyond the SST file's last point key, advancing to the next SST file would lose this range tombstone. Consequently, `MergingIterator` could return keys that should have been deleted by some range tombstone. We prevent this by pretending that file boundaries in each SST file are sentinel keys. A `LevelIterator` now only advance the file iterator once the sentinel key is processed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10449
Test Plan:
- Added many unit tests in db_range_del_test
- Stress test: `./db_stress --readpercent=5 --prefixpercent=19 --writepercent=20 -delpercent=10 --iterpercent=44 --delrangepercent=2`
- Additional iterator stress test is added to verify against iterators against expected state: https://github.com/facebook/rocksdb/issues/10538. This is based on ajkr's previous attempt https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913.
```
python3 ./tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --compression_type=none --max_background_compactions=8 --value_size_mult=33 --max_key=5000000 --interval=10 --duration=7200 --delrangepercent=3 --delpercent=9 --iterpercent=25 --writepercent=60 --readpercent=3 --prefixpercent=0 --num_iterations=1000 --range_deletion_width=100 --verify_iterator_with_expected_state_one_in=1
```
- Performance benchmark: I used a similar setup as in the blog [post](http://rocksdb.org/blog/2018/11/21/delete-range.html) that introduced DeleteRange, "a database with 5 million data keys, and 10000 range tombstones (ignoring those dropped during compaction) that were written in regular intervals after 4.5 million data keys were written". As expected, the performance with this PR depends on the range tombstone width.
```
# Setup:
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=fillrandom --writes=4500000 --num=5000000
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=overwrite --writes=500000 --num=5000000 --use_existing_db=true --writes_per_range_tombstone=50
# Scan entire DB
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=readseq[-X5] --use_existing_db=true --num=5000000 --disable_auto_compactions=true
# Short range scan (10 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=100000 --seek_nexts=10 --disable_auto_compactions=true
# Long range scan(1000 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=2500 --seek_nexts=1000 --disable_auto_compactions=true
```
Avg over of 10 runs (some slower tests had fews runs):
For the first column (tombstone), 0 means no range tombstone, 100-10000 means width of the 10k range tombstones, and 1 means there is a single range tombstone in the entire DB (width is 1000). The 1 tombstone case is to test regression when there's very few range tombstones in the DB, as no range tombstone is likely to take a different code path than with range tombstones.
- Scan entire DB
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2525600 (± 43564) |2486917 (± 33698) |-1.53% |
| 100 |1853835 (± 24736) |2073884 (± 32176) |+11.87% |
| 1000 |422415 (± 7466) |1115801 (± 22781) |+164.15% |
| 10000 |22384 (± 227) |227919 (± 6647) |+918.22% |
| 1 range tombstone |2176540 (± 39050) |2434954 (± 24563) |+11.87% |
- Short range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |35398 (± 533) |35338 (± 569) |-0.17% |
| 100 |28276 (± 664) |31684 (± 331) |+12.05% |
| 1000 |7637 (± 77) |25422 (± 277) |+232.88% |
| 10000 |1367 |28667 |+1997.07% |
| 1 range tombstone |32618 (± 581) |32748 (± 506) |+0.4% |
- Long range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2262 (± 33) |2353 (± 20) |+4.02% |
| 100 |1696 (± 26) |1926 (± 18) |+13.56% |
| 1000 |410 (± 6) |1255 (± 29) |+206.1% |
| 10000 |25 |414 |+1556.0% |
| 1 range tombstone |1957 (± 30) |2185 (± 44) |+11.65% |
- Microbench does not show significant regression: https://gist.github.com/cbi42/59f280f85a59b678e7e5d8561e693b61
Reviewed By: ajkr
Differential Revision: D38450331
Pulled By: cbi42
fbshipit-source-id: b5ef12e8d8c289ed2e163ccdf277f5039b511fca
Summary:
RocksDB does auto-readahead for iterators on noticing more
than two reads for a table file if user doesn't provide readahead_size and reads are sequential.
A new option num_file_reads_for_auto_readahead is added which can be
configured and indicates after how many sequential reads prefetching should
be start.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10556
Test Plan: Existing and new unit test
Reviewed By: anand1976
Differential Revision: D38947147
Pulled By: akankshamahajan15
fbshipit-source-id: c9eeab495f84a8df7f701c42f04894e46440ad97
Summary:
This stat was only getting updated in the async (coroutine) version of MultiGet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10622
Reviewed By: akankshamahajan15
Differential Revision: D39188790
Pulled By: anand1976
fbshipit-source-id: 7e231507f65fc94c8a006c38f79dfba182a2c24a
Summary:
Right now, when the option migration tool migrates to FIFO compaction, it compacts all the data into one single SST file and move to L0. Although it creates a valid LSM-tree for FIFO, for any data to be deleted for FIFO, the giant file will be deleted, which might make the DB almost empty. There is not good solution for it, because usually we don't have enough information to reconstruct the FIFO LSM-tree. This change changes to a solution that compromises the FIFO condition. We hope the solution is more useable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10600
Test Plan: Add unit tests for that.
Reviewed By: jay-zhuang
Differential Revision: D39106424
fbshipit-source-id: bdfd852c3b343373765b8d9716fefc08fd27145c
Summary:
**Context:**
Below crash test revealed a bug that directory containing CURRENT file (short for `dir_contains_current_file` below) was not always get synced after a new CURRENT is created and being called with `RenameFile` as part of the creation.
This bug exposes a risk that such un-synced directory containing the updated CURRENT can’t survive a host crash (e.g, power loss) hence get corrupted. This then will be followed by a recovery from a corrupted CURRENT that we don't want.
The root-cause is that a nullptr `FSDirectory* dir_contains_current_file` sometimes gets passed-down to `SetCurrentFile()` hence in those case `dir_contains_current_file->FSDirectory::FsyncWithDirOptions()` will be skipped (which otherwise will internally call`Env/FS::SyncDic()` )
```
./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --allow_data_in_errors=True --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=8 --block_size=16384 --bloom_bits=134.8015470676662 --bottommost_compression_type=disable --cache_size=8388608 --checkpoint_one_in=1000000 --checksum_type=kCRC32c --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_ttl=100 --compression_max_dict_buffer_bytes=511 --compression_max_dict_bytes=16384 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=65536 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --expected_values_dir=$exp --fail_if_options_file_error=1 --file_checksum_impl=none --flush_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --ingest_external_file_one_in=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --mark_for_compaction_one_file_in=10 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=16384 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.001 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --mmap_read=1 --nooverwritepercent=1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=5 --prefixpercent=5 --prepopulate_block_cache=1 --progress_reports=0 --read_fault_one_in=1000 --readpercent=45 --recycle_log_file_num=0 --reopen=0 --ribbon_starting_level=999 --secondary_cache_fault_one_in=32 --secondary_cache_uri=compressed_secondary_cache://capacity=8388608 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --subcompactions=3 --sync_fault_injection=1 --target_file_size_base=2097 --target_file_size_multiplier=2 --test_batches_snapshots=1 --top_level_index_pinning=1 --use_full_merge_v1=1 --use_merge=1 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --write_buffer_size=4194 --writepercent=35
```
```
stderr:
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
db_stress: utilities/fault_injection_fs.cc:748: virtual rocksdb::IOStatus rocksdb::FaultInjectionTestFS::RenameFile(const std::string &, const std::string &, const rocksdb::IOOptions &, rocksdb::IODebugContext *): Assertion `tlist.find(tdn.second) == tlist.end()' failed.`
```
**Summary:**
The PR ensured the non-test path pass down a non-null dir containing CURRENT (which is by current RocksDB assumption just db_dir) by doing the following:
- Renamed `directory_to_fsync` as `dir_contains_current_file` in `SetCurrentFile()` to tighten the association between this directory and CURRENT file
- Changed `SetCurrentFile()` API to require `dir_contains_current_file` being passed-in, instead of making it by default nullptr.
- Because `SetCurrentFile()`'s `dir_contains_current_file` is passed down from `VersionSet::LogAndApply()` then `VersionSet::ProcessManifestWrites()` (i.e, think about this as a chain of 3 functions related to MANIFEST update), these 2 functions also got refactored to require `dir_contains_current_file`
- Updated the non-test-path callers of these 3 functions to obtain and pass in non-nullptr `dir_contains_current_file`, which by current assumption of RocksDB, is the `FSDirectory* db_dir`.
- `db_impl` path will obtain `DBImpl::directories_.getDbDir()` while others with no access to such `directories_` are obtained on the fly by creating such object `FileSystem::NewDirectory(..)` and manage it by unique pointers to ensure short life time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10573
Test Plan:
- `make check`
- Passed the repro db_stress command
- For future improvement, since we currently don't assert dir containing CURRENT to be non-nullptr due to https://github.com/facebook/rocksdb/pull/10573#pullrequestreview-1087698899, there is still chances that future developers mistakenly pass down nullptr dir containing CURRENT thus resulting skipped sync dir and cause the bug again. Therefore a smarter test (e.g, such as quoted from ajkr "(make) unsynced data loss to be dropping files corresponding to unsynced directory entries") is still needed.
Reviewed By: ajkr
Differential Revision: D39005886
Pulled By: hx235
fbshipit-source-id: 336fb9090d0cfa6ca3dd580db86268007dde7f5a
Summary:
Imported a fix to "rocksdb.prefetched.bytes.discarded" stat from https://github.com/facebook/rocksdb/issues/10561, and added a new stat "rocksdb.async.prefetch.abort.micros" to measure time spent waiting for async reads to abort.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10585
Reviewed By: akankshamahajan15
Differential Revision: D39067000
Pulled By: anand1976
fbshipit-source-id: d7cda71abb48017239bd5fd832345a16c7024faf
Summary:
Some APIs for getting live files, which are used by Checkpoint
and BackupEngine, can optionally trigger and wait for a flush. These
would deadlock when used on a read-only DB. Here we fix that by assuming
the user wants the overall operation to succeed and is OK without
flushing (because the DB is read-only).
Follow-up work: the same or other issues can be hit by directly invoking
some DB functions that are clearly not appropriate for read-only
instance, but are not covered by overrides in DBImplReadOnly and
CompactedDBImpl. These should be fixed to avoid similar problems on
accidental misuse. (Long term, it would be nice to have a DBReadOnly
class without those members, like BackupEngineReadOnly.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10569
Test Plan: tests updated to catch regression (hang before the fix)
Reviewed By: riversand963
Differential Revision: D38995759
Pulled By: pdillinger
fbshipit-source-id: f5f8bc7123e13cb45bd393dd974d7d6eda20bc68
Summary:
Timer has a limitation that it cannot re-register a task with the same name,
because the cancel only mark the task as invalid and wait for the Timer thread
to clean it up later, before the task is cleaned up, the same task name cannot
be added. Which makes the task option update likely to fail, which basically
cancel and re-register the same task name. Change the periodic task name to a
random unique id and store it in periodic_task_scheduler.
Also refactor the `periodic_work` to `periodic_task` to make each job function
as a `task`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10379
Test Plan: unittests
Reviewed By: ajkr
Differential Revision: D38000615
Pulled By: jay-zhuang
fbshipit-source-id: e4135f9422e3b53aaec8eda54f4e18ce633a279e
Summary:
WAL append and switch can both happen between `FlushWAL(true /* sync */)`'s sync operations and its call to `MarkLogsSynced()`. We permit this since locks need to be released for the sync operations. Such an appended/switched WAL is both inactive and incompletely synced at the time `MarkLogsSynced()` processes it.
Prior to this PR, `MarkLogsSynced()` assumed all inactive WALs were fully synced and removed them from consideration for future syncs. That was wrong in the scenario described above and led to the latest append(s) never being synced. This PR changes `MarkLogsSynced()` to only remove inactive WALs from consideration for which all flushed data has been synced.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10560
Test Plan: repro unit test for the scenario described above. Without this PR, it fails on "key2" not found
Reviewed By: riversand963
Differential Revision: D38957391
Pulled By: ajkr
fbshipit-source-id: da77175eba97ff251a4219b227b3bb2d4843ed26
Summary:
As mentioned in https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913,
`db_stress` does not have much verification for iterator correctness.
It has a `TestIterate()` function, but that is mainly for comparing results
between two iterators, one with `total_order_seek` and the other optionally
sets auto_prefix, upper/lower bounds. Commit 49a0581ad2462e31aa3f768afa769e0d33390f33
added a new `TestIterateAgainstExpected()` function that compares iterator against
expected state. It locks a range of keys, creates an iterator, does
a random sequence of `Next/Prev` and compares against expected state.
This PR is based on that commit, the main changes include some logs
(for easier debugging if a test fails), a forward and backward scan to
cover the entire locked key range, and a flag for optionally turning on
this version of Iterator testing.
Added constraint that the checks against expected state in
`TestIterateAgainstExpected()` and in `TestGet()` are only turned on
when `--skip_verifydb` flag is not set.
Remove the change log introduced in https://github.com/facebook/rocksdb/issues/10553.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10538
Test Plan:
Run `db_stress` with `--verify_iterator_with_expected_state_one_in=1`,
and a large `--iterpercent` and `--num_iterations`. Checked `op_logs`
manually to ensure expected coverage. Tweaked part of the code in
https://github.com/facebook/rocksdb/issues/10449 and stress test was able to catch it.
- internally run various flavor of crash test
Reviewed By: ajkr
Differential Revision: D38847269
Pulled By: cbi42
fbshipit-source-id: 8b4402a9bba9f6cfa08051943cd672579d489599
Summary:
updated `TestGet()` in `no_batched_op_stress` to check the result of `Get()` operations against expected state (`expected_state_manager_`). More specifically, if `Get()` finds a key, expected state should not have `DELETION_SENTINEL` for the same key, and if `Get()` returns NotFound for a key, expected state should not have the key. One intention for this change it to verify correctness of code path change regarding range tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10553
Test Plan: run db_stress with nonzero readpercent: `./db_stress_branch --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`. When I initially used wrong column family in `thread->shared->Get`, the test reported inconsistencies.
Reviewed By: ajkr
Differential Revision: D38927007
Pulled By: cbi42
fbshipit-source-id: f9f61b312ad0b4c21a799329609ba8526169b048
Summary:
This PR exploits parallelism in MultiGet across levels. It applies only to the coroutine version of MultiGet. Previously, MultiGet file reads from SST files in the same level were parallelized. With this PR, MultiGet batches with keys distributed across multiple levels are read in parallel. This is accomplished by splitting the keys not present in a level (determined by bloom filtering) into a separate batch, and processing the new batch in parallel with the original batch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10535
Test Plan:
1. Ensure existing MultiGet unit tests pass, updating them as necessary
2. New unit tests - TODO
3. Run stress test - TODO
No noticeable regression (<1%) without async IO -
Without PR: `multireadrandom : 7.261 micros/op 1101724 ops/sec 60.007 seconds 66110936 operations; 571.6 MB/s (8168992 of 8168992 found)`
With PR: `multireadrandom : 7.305 micros/op 1095167 ops/sec 60.007 seconds 65717936 operations; 568.2 MB/s (8271992 of 8271992 found)`
For a fully cached DB, but with async IO option on, no regression observed (<1%) -
Without PR: `multireadrandom : 5.201 micros/op 1538027 ops/sec 60.005 seconds 92288936 operations; 797.9 MB/s (11540992 of 11540992 found) `
With PR: `multireadrandom : 5.249 micros/op 1524097 ops/sec 60.005 seconds 91452936 operations; 790.7 MB/s (11649992 of 11649992 found) `
Reviewed By: akankshamahajan15
Differential Revision: D38774009
Pulled By: anand1976
fbshipit-source-id: c955e259749f1c091590ade73105b3ee46cd0007
Summary:
This reverts commit 0d885e80d4. The original commit causes a ASAN stack-use-after-return failure due to the `CreateCallback` being allocated on stack and then used in another thread when a secondary cache object is promoted to the primary cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10541
Reviewed By: gitbw95
Differential Revision: D38850039
Pulled By: anand1976
fbshipit-source-id: 810c592b7de2523693f5bb267159b23b0ee9132c
Summary:
Previously, the flushes triggered by `WriteBufferManager` could affect
the same CF repeatedly if it happens to get consecutive writes. Such
flushes are not particularly useful for reducing memory usage since
they switch nearly-empty memtables to immutable while they've just begun
filling their first arena block. In fact they may not even reduce the
mutable memory count if they involve replacing one mutable memtable containing
one arena block with a new mutable memtable containing one arena block.
Further, if such switches happen even a few times before a flush finishes,
the immutable memtable limit will be reached and writes will stall.
This PR adds a heuristic to not switch memtables to immutable for CFs
that already have one or more immutable memtables awaiting flush. There
is a memory usage regression if the user continues writing to the same
CF, that DB does not have any CFs eligible for switching, flushes
are not finishing, and the `WriteBufferManager` was constructed with
`allow_stall=false`. Before, it would grow by switching nearly empty
memtables until writes stall. Now, it would grow by filling memtables
until writes stall. This feels like an acceptable behavior change because
users who prefer to stall over violate the memory limit should be using
`allow_stall=true`, which is unaffected by this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6364
Test Plan:
- Command:
`rm -rf /dev/shm/dbbench/ && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num_multi_db=8 -num_column_families=2 -write_buffer_size=4194304 -db_write_buffer_size=16777216 -compression_type=none -statistics=true -target_file_size_base=4194304 -max_bytes_for_level_base=16777216`
- `rocksdb.db.write.stall` count before this PR: 175
- `rocksdb.db.write.stall` count after this PR: 0
Reviewed By: jay-zhuang
Differential Revision: D20167197
Pulled By: ajkr
fbshipit-source-id: 4a64064e9bc33d57c0a35f15547542d0191d0cb7
Summary:
RocksDB's `Cache` abstraction currently supports two priority levels for items: high (used for frequently accessed/highly valuable SST metablocks like index/filter blocks) and low (used for SST data blocks). Blobs are typically lower-value targets for caching than data blocks, since 1) with BlobDB, data blocks containing blob references conceptually form an index structure which has to be consulted before we can read the blob value, and 2) cached blobs represent only a single key-value, while cached data blocks generally contain multiple KVs. Since we would like to make it possible to use the same backing cache for the block cache and the blob cache, it would make sense to add a new, lower-than-low cache priority level (bottom level) for blobs so data blocks are prioritized over them.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10461
Reviewed By: siying
Differential Revision: D38672823
Pulled By: ltamasi
fbshipit-source-id: 90cf7362036563d79891f47be2cc24b827482743
Summary:
... so that cache keys can be derived from DB manifest data
before reading the file from storage--so that every part of the file
can potentially go in a persistent cache.
See updated comments in cache_key.cc for technical details. Importantly,
the new cache key encoding uses some fancy but efficient math to pack
data into the cache key without depending on the sizes of the various
pieces. This simplifies some existing code creating cache keys, like
cache warming before the file size is known.
This should provide us an essentially permanent mapping between SST
unique IDs and base cache keys, with the ability to "upgrade" SST
unique IDs (and thus cache keys) with new SST format_versions.
These cache keys are of similar, perhaps indistinguishable quality to
the previous generation. Before this change (see "corrected" days
between collision):
```
./cache_bench -stress_cache_key -sck_keep_bits=43
18 collisions after 2 x 90 days, est 10 days between (1.15292e+19 corrected)
```
After this change (keep 43 bits, up through 50, to validate "trajectory"
is ok on "corrected" days between collision):
```
19 collisions after 3 x 90 days, est 14.2105 days between (1.63836e+19 corrected)
16 collisions after 5 x 90 days, est 28.125 days between (1.6213e+19 corrected)
15 collisions after 7 x 90 days, est 42 days between (1.21057e+19 corrected)
15 collisions after 17 x 90 days, est 102 days between (1.46997e+19 corrected)
15 collisions after 49 x 90 days, est 294 days between (2.11849e+19 corrected)
15 collisions after 62 x 90 days, est 372 days between (1.34027e+19 corrected)
15 collisions after 53 x 90 days, est 318 days between (5.72858e+18 corrected)
15 collisions after 309 x 90 days, est 1854 days between (1.66994e+19 corrected)
```
However, the change does modify (probably weaken) the "guaranteed unique" promise from this
> SST files generated in a single process are guaranteed to have unique cache keys, unless/until number session ids * max file number = 2**86
to this (see https://github.com/facebook/rocksdb/issues/10388)
> With the DB id limitation, we only have nice guaranteed unique cache keys for files generated in a single process until biggest session_id_counter and offset_in_file reach combined 64 bits
I don't think this is a practical concern, though.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10394
Test Plan: unit tests updated, see simulation results above
Reviewed By: jay-zhuang
Differential Revision: D38667529
Pulled By: pdillinger
fbshipit-source-id: 49af3fe7f47e5b61162809a78b76c769fd519fba
Summary:
A flag in WritableFileWriter is introduced to remember error has happened. Subsequent operations will fail with an assertion. Those operations, except Close() are not supposed to be called anyway. This change will help catch bug in tests and stress tests and limit damage of a potential bug of continue writing to a file after a failure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10489
Test Plan: Fix existing unit tests and watch crash tests for a while.
Reviewed By: anand1976
Differential Revision: D38473277
fbshipit-source-id: 09aafb971e56cfd7f9ef92ad15b883f54acf1366
Summary:
This fix is to replace `AllocateBlock()` with `new`. Once I figure out why `AllocateBlock()` might cause the segfault, I will update the implementation.
Fix the bug that causes ./compressed_secondary_cache_test output following test failures:
```
Note: Google Test filter = CompressedSecondaryCacheTest.MergeChunksIntoValueTest
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from CompressedSecondaryCacheTest
[ RUN ] CompressedSecondaryCacheTest.MergeChunksIntoValueTest
[ OK ] CompressedSecondaryCacheTest.MergeChunksIntoValueTest (1 ms)
[----------] 1 test from CompressedSecondaryCacheTest (1 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (9 ms total)
[ PASSED ] 1 test.
t/run-compressed_secondary_cache_test-CompressedSecondaryCacheTest.MergeChunksIntoValueTest: line 4: 1091086 Segmentation fault (core dumped) TEST_TMPDIR=$d ./compressed_secondary_cache_test --gtest_filter=CompressedSecondaryCacheTest.MergeChunksIntoValueTest
Note: Google Test filter = CompressedSecondaryCacheTest.BasicTestWithMemoryAllocatorAndCompression
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from CompressedSecondaryCacheTest
[ RUN ] CompressedSecondaryCacheTest.BasicTestWithMemoryAllocatorAndCompression
[ OK ] CompressedSecondaryCacheTest.BasicTestWithMemoryAllocatorAndCompression (1 ms)
[----------] 1 test from CompressedSecondaryCacheTest (1 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (2 ms total)
[ PASSED ] 1 test.
t/run-compressed_secondary_cache_test-CompressedSecondaryCacheTest.BasicTestWithMemoryAllocatorAndCompression: line 4: 1090883 Segmentation fault (core dumped) TEST_TMPDIR=$d ./compressed_secondary_cache_test --gtest_filter=CompressedSecondaryCacheTest.BasicTestWithMemoryAllocatorAndCompression
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10507
Test Plan:
Test 1:
```
$make -j 24
$./compressed_secondary_cache_test
```
Test 2:
```
$COMPILE_WITH_ASAN=1 make -j 24
$./compressed_secondary_cache_test
```
Test 3:
```
$COMPILE_WITH_TSAN=1 make -j 24
$./compressed_secondary_cache_test
```
Reviewed By: anand1976
Differential Revision: D38529885
Pulled By: gitbw95
fbshipit-source-id: d903fa3fadbd4d29f9528728c63a4f61c4396890
Summary:
We have recently added caching support to BlobDB, and separately,
implemented an optimization where reading blobs from the cache
results in the cache handle being transferred to the target `PinnableSlice`
(as opposed to the contents getting copied). With these changes,
it makes sense to reset the `PinnableSlice` storing the blob value in
`DBIter` as soon as we move to a different iterator position to prevent
us from holding on to the cache handle any longer than necessary.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10490
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D38473630
Pulled By: ltamasi
fbshipit-source-id: 84c045ffac76436c6152fd0f5775b007f4051386
Summary:
Change tiered compaction feature from `bottommost_temperture` to
`last_level_temperture`. The old option is kept for migration purpose only,
which is behaving the same as `last_level_temperture` and it will be removed in
the next release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10471
Test Plan: CI
Reviewed By: siying
Differential Revision: D38450621
Pulled By: jay-zhuang
fbshipit-source-id: cc1cdf8bad409376fec0152abc0a64fb72a91527
Summary:
Current universal compaction picker may cause extra size amplification
compaction if there're more hot data on penultimate level. Improve the picker
to skip the last level for size amp calculation if tiered compaction is
enabled, which can
1. avoid extra unnecessary size amp compaction;
2. typically cold tier (the last level) is not size constrained, so skip size
amp for cold tier is intended;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10467
Test Plan: CI and added unittest
Reviewed By: siying
Differential Revision: D38391350
Pulled By: jay-zhuang
fbshipit-source-id: 103c0731c05e0a7e8f267e9e829d022328be25d2
Summary:
lambda function dynamicly allocates memory from heap if it needs to
capture multiple values, which could be expensive.
Switch to explictly use local functor from stack.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10453
Test Plan:
CI
db_bench shows ~2-3% read improvement:
```
# before the change
TEST_TMPDIR=/tmp/dbbench4 ./db_bench_main --benchmarks=filluniquerandom,readrandom -compression_type=none -max_background_jobs=12 -num=10000000
readrandom : 8.528 micros/op 117265 ops/sec 85.277 seconds 10000000 operations; 13.0 MB/s (10000000 of 10000000 found)
# after the change
TEST_TMPDIR=/tmp/dbbench5 ./db_bench_new --benchmarks=filluniquerandom,readrandom -compression_type=none -max_background_jobs=12 -num=10000000
readrandom : 8.263 micros/op 121015 ops/sec 82.634 seconds 10000000 operations; 13.4 MB/s (10000000 of 10000000 found)
```
details: https://gist.github.com/jay-zhuang/5ac0628db8fc9cbcb499e056d4cb5918
Micro-benchmark shows a similar improvement ~1-2%:
before the change:
https://gist.github.com/jay-zhuang/9dc0ebf51bbfbf4af82f6193d43cf75b
after the change:
https://gist.github.com/jay-zhuang/fc061f1813cd8f441109ad0b0fe7c185
Reviewed By: ajkr
Differential Revision: D38345056
Pulled By: jay-zhuang
fbshipit-source-id: f3597aeeee338a804d37bf2e81386d5a100665e0
Summary:
- Right now each read fragments the memtable range tombstones https://github.com/facebook/rocksdb/issues/4808. This PR explores the idea of fragmenting memtable range tombstones in the write path and reads can just read this cached fragmented tombstone without any fragmenting cost. This PR only does the caching for immutable memtable, and does so right before a memtable is added to an immutable memtable list. The fragmentation is done without holding mutex to minimize its performance impact.
- db_bench is updated to print out the number of range deletions executed if there is any.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10380
Test Plan:
- CI, added asserts in various places to check whether a fragmented range tombstone list should have been constructed.
- Benchmark: as this PR only optimizes immutable memtable path, the number of writes in the benchmark is chosen such an immutable memtable is created and range tombstones are in that memtable.
```
single thread:
./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=1 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=100000 --max_num_range_tombstones=100
multi_thread
./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=1 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=15000 --reads=20000 --threads=32 --max_num_range_tombstones=100
```
Commit 99cdf16464 is included in benchmark result. It was an earlier attempt where tombstones are fragmented for each write operation. Reader threads share it using a shared_ptr which would slow down multi-thread read performance as seen in benchmark results.
Results are averaged over 5 runs.
Single thread result:
| Max # tombstones | main fillrandom micros/op | 99cdf16464 | Post PR | main readrandom micros/op | 99cdf16464 | Post PR |
| ------------- | ------------- |------------- |------------- |------------- |------------- |------------- |
| 0 |6.68 |6.57 |6.72 |4.72 |4.79 |4.54 |
| 1 |6.67 |6.58 |6.62 |5.41 |4.74 |4.72 |
| 10 |6.59 |6.5 |6.56 |7.83 |4.69 |4.59 |
| 100 |6.62 |6.75 |6.58 |29.57 |5.04 |5.09 |
| 1000 |6.54 |6.82 |6.61 |320.33 |5.22 |5.21 |
32-thread result: note that "Max # tombstones" is per thread.
| Max # tombstones | main fillrandom micros/op | 99cdf16464 | Post PR | main readrandom micros/op | 99cdf16464 | Post PR |
| ------------- | ------------- |------------- |------------- |------------- |------------- |------------- |
| 0 |234.52 |260.25 |239.42 |5.06 |5.38 |5.09 |
| 1 |236.46 |262.0 |231.1 |19.57 |22.14 |5.45 |
| 10 |236.95 |263.84 |251.49 |151.73 |21.61 |5.73 |
| 100 |268.16 |296.8 |280.13 |2308.52 |22.27 |6.57 |
Reviewed By: ajkr
Differential Revision: D37916564
Pulled By: cbi42
fbshipit-source-id: 05d6d2e16df26c374c57ddcca13a5bfe9d5b731e
Summary:
Currently, `SetIsInSecondaryCache` is after `Promote`. After `Promote`, a handle can be accessed and its flags can be set. This causes data race.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10472
Test Plan:
unit tests
stress tests
Reviewed By: pdillinger
Differential Revision: D38403991
Pulled By: gitbw95
fbshipit-source-id: 0aaa2d2edeaf5bc799fcce605648fe49eb7119c2
Summary:
### **Summary:**
To minimize the internal fragmentation caused by the variable size of the compressed blocks, the original block is split according to the jemalloc bin size in `Insert()` and then merged back in `Lookup()`. Based on the analysis of the results of the following tests, from the overall internal fragmentation perspective, this PR does mitigate the internal fragmentation issue.
_Do more myshadow tests with the latest commit. I finished several myshadow AB Testing and the results are promising. For the config of 4GB primary cache and 3GB secondary cache, Jemalloc resident stats shows consistently ~0.15GB memory saving; the allocated and active stats show similar memory savings. The CPU usage is almost the same before and after this PR._
To evaluate the issue of memory fragmentations and the benefits of this PR, I conducted two sets of local tests as follows.
**T1**
Keys: 16 bytes each (+ 0 bytes user-defined timestamp)
Values: 100 bytes each (50 bytes after compression)
Entries: 90000000
RawSize: 9956.4 MB (estimated)
FileSize: 5664.8 MB (estimated)
| Test Name | Primary Cache Size (MB) | Compressed Secondary Cache Size (MB) |
| - | - | - |
| T1_3 | 4000 | 4000 |
| T1_4 | 2000 | 3000 |
Populate the DB:
./db_bench --benchmarks=fillrandom --num=90000000 -db=/mem_fragmentation/db_bench_1
Overwrite it to a stable state:
./db_bench --benchmarks=overwrite --num=90000000 -use_existing_db -db=/mem_fragmentation/db_bench_1
Run read tests with differnt cache setting:
T1_3:
MALLOC_CONF="prof:true,prof_stats:true" ../rocksdb/db_bench --benchmarks=seekrandom --threads=16 --num=90000000 -use_existing_db --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=4000000000 -compressed_secondary_cache_size=4000000000 -use_compressed_secondary_cache -db=/mem_fragmentation/db_bench_1 --print_malloc_stats=true > ~/temp/mem_frag/20220710/jemalloc_stats_json_T1_3_20220710 -duration=1800 &
T1_4:
MALLOC_CONF="prof:true,prof_stats:true" ../rocksdb/db_bench --benchmarks=seekrandom --threads=16 --num=90000000 -use_existing_db --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=2000000000 -compressed_secondary_cache_size=3000000000 -use_compressed_secondary_cache -db=/mem_fragmentation/db_bench_1 --print_malloc_stats=true > ~/temp/mem_frag/20220710/jemalloc_stats_json_T1_4_20220710 -duration=1800 &
For T1_3 and T1_4, I also conducted the tests before and after this PR. The following table show the important jemalloc stats.
| Test Name | T1_3 | T1_3 after mem defrag | T1_4 | T1_4 after mem defrag |
| - | - | - | - | - |
| allocated (MB) | 8728 | 8076 | 5518 | 5043 |
| available (MB) | 8753 | 8092 | 5536 | 5051 |
| external fragmentation rate | 0.003 | 0.002 | 0.003 | 0.0016 |
| resident (MB) | 8956 | 8365 | 5655 | 5235 |
**T2**
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 256 bytes each (128 bytes after compression)
Entries: 40000000
RawSize: 10986.3 MB (estimated)
FileSize: 6103.5 MB (estimated)
| Test Name | Primary Cache Size (MB) | Compressed Secondary Cache Size (MB) |
| - | - | - |
| T2_3 | 4000 | 4000 |
| T2_4 | 2000 | 3000 |
Create DB (10GB):
./db_bench -benchmarks=fillrandom -use_direct_reads=true -num=40000000 -key_size=32 -value_size=256 -db=/mem_fragmentation/db_bench_2
Overwrite it to a stable state:
./db_bench --benchmarks=overwrite --num=40000000 -use_existing_db -key_size=32 -value_size=256 -db=/mem_fragmentation/db_bench_2
Run read tests with differnt cache setting:
T2_3:
MALLOC_CONF="prof:true,prof_stats:true" ./db_bench --benchmarks="mixgraph" -use_direct_io_for_flush_and_compaction=true -use_direct_reads=true -cache_size=4000000000 -compressed_secondary_cache_size=4000000000 -use_compressed_secondary_cache -keyrange_dist_a=14.18 -keyrange_dist_b=-2.917 -keyrange_dist_c=0.0164 -keyrange_dist_d=-0.08082 -keyrange_num=30 -value_k=0.2615 -value_sigma=25.45 -iter_k=2.517 -iter_sigma=14.236 -mix_get_ratio=0.85 -mix_put_ratio=0.14 -mix_seek_ratio=0.01 -sine_mix_rate_interval_milliseconds=5000 -sine_a=1000 -sine_b=0.000073 -sine_d=400000 -reads=80000000 -num=40000000 -key_size=32 -value_size=256 -use_existing_db=true -db=/mem_fragmentation/db_bench_2 --print_malloc_stats=true > ~/temp/mem_frag/jemalloc_stats_T2_3 -duration=1800 &
T2_4:
MALLOC_CONF="prof:true,prof_stats:true" ./db_bench --benchmarks="mixgraph" -use_direct_io_for_flush_and_compaction=true -use_direct_reads=true -cache_size=2000000000 -compressed_secondary_cache_size=3000000000 -use_compressed_secondary_cache -keyrange_dist_a=14.18 -keyrange_dist_b=-2.917 -keyrange_dist_c=0.0164 -keyrange_dist_d=-0.08082 -keyrange_num=30 -value_k=0.2615 -value_sigma=25.45 -iter_k=2.517 -iter_sigma=14.236 -mix_get_ratio=0.85 -mix_put_ratio=0.14 -mix_seek_ratio=0.01 -sine_mix_rate_interval_milliseconds=5000 -sine_a=1000 -sine_b=0.000073 -sine_d=400000 -reads=80000000 -num=40000000 -key_size=32 -value_size=256 -use_existing_db=true -db=/mem_fragmentation/db_bench_2 --print_malloc_stats=true > ~/temp/mem_frag/jemalloc_stats_T2_4 -duration=1800 &
For T2_3 and T2_4, I also conducted the tests before and after this PR. The following table show the important jemalloc stats.
| Test Name | T2_3 | T2_3 after mem defrag | T2_4 | T2_4 after mem defrag |
| - | - | - | - | - |
| allocated (MB) | 8425 | 8093 | 5426 | 5149 |
| available (MB) | 8489 | 8138 | 5435 | 5158 |
| external fragmentation rate | 0.008 | 0.0055 | 0.0017 | 0.0017 |
| resident (MB) | 8676 | 8392 | 5541 | 5321 |
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10287
Test Plan: Unit tests.
Reviewed By: anand1976
Differential Revision: D37743362
Pulled By: gitbw95
fbshipit-source-id: 0010c5af08addeacc5ebbc4ffe5be882fb1d38ad
Summary:
TL;DR: due to a recent change, if you drop a column family,
often that DB will no longer fsync after writing new SST files
to remaining or new column families, which could lead to data
loss on power loss.
More bug detail:
The intent of https://github.com/facebook/rocksdb/issues/10049 was to Close FSDirectory objects at
DB::Close time rather than waiting for DB object destruction.
Unfortunately, it also closes shared FSDirectory objects on
DropColumnFamily (& destroy remaining handles), which can lead
to use-after-Close on FSDirectory shared with remaining column
families. Those "uses" are only Fsyncs (or redundant Closes). In
the default Posix filesystem, an Fsync on a closed FSDirectory is a
quiet no-op. Consequently (under most configurations), if you drop
a column family, that DB will no longer fsync after writing new SST
files to column families sharing the same directory (true under most
configurations).
More fix detail:
Basically, this removes unnecessary Close ops on destroying
ColumnFamilyData. We let `shared_ptr` take care of calling the
destructor at the right time. If the intent was to require Close be
called before destroying FSDirectory, that was not made clear by the
author of FileSystem and was not at all enforced by https://github.com/facebook/rocksdb/issues/10049, which
could have added `assert(fd_ == -1)` to `~PosixDirectory()` but did
not. To keep this fix simple, we relax the unit test for https://github.com/facebook/rocksdb/issues/10049 to allow
timely destruction of FSDirectory to suffice as Close (in
CountedFileSystem). Added a TODO to revisit that.
Also in this PR:
* Added a TODO to share FSDirectory instances between DB and its column
families. (Already shared among column families.)
* Made DB::Close attempt to close all its open FSDirectory objects even
if there is a failure in closing one. Also code clean-up around this
logic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10460
Test Plan:
add an assert to check for use-after-Close. With that
existing tests can detect the misuse. With fix, tests pass (except noted
relaxing of unit test for https://github.com/facebook/rocksdb/issues/10049)
Reviewed By: ajkr
Differential Revision: D38357922
Pulled By: pdillinger
fbshipit-source-id: d42079cadbedf0a969f03389bf586b3b4e1f9137
Summary:
During compaction, blobs are currently read using the default
`ReadOptions`, which has the `fill_cache` flag set to true. Earlier,
this didn't make any difference since we didn't have a blob cache;
however, now we have to explicitly set this flag to false to avoid
polluting the cache during compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10457
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D38333528
Pulled By: ltamasi
fbshipit-source-id: 5b4d49a1e39543bee73c7df2aa9194fb101875e2
Summary:
FileMetaData::[min|max]_timestamp are not currently being used or
tracked by RocksDB, even when user-defined timestamp is enabled. Each of
them is a std::string which can occupy 32 bytes. Remove them for now.
They may be added back when we have a pressing need for them. When we do
add them back, consider store them in a more compact way, e.g. one
boolean flag and a byte array of size 16.
Per file min/max timestamp bounds are available as table properties.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10443
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D38292275
Pulled By: riversand963
fbshipit-source-id: 841dc4e855ad8f8481c80cb020603de9607c9c94
Summary:
EnvLogger was built to replace PosixLogger that supports multiple Envs. Make FileSystem use EnvLogger by default, remove Posix FS specific implementation and remove PosixLogger code,
Some hacky changes are made to make sure iostats are not polluted by logging, in order to pass existing unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10436
Test Plan: Run db_bench and watch info log files.
Reviewed By: anand1976
Differential Revision: D38259855
fbshipit-source-id: 67d65874bfba7a33535b6d0dd0ed92cbbc9888b8
Summary:
The subcompaction logic currently picks file boundaries as subcompaction boundaries. This is not compatible with user-defined timestamps because of two issues.
Issue1: ReadOptions.iterate_lower_bound and ReadOptions.iterate_upper_bound contains timestamps which results in assertion failure as BlockBasedTableIterator expects bounds to be without timestamps. As result, because of wrong comparison end key is returned as user_key resulting in assertion failure.
Issue2: Since it might result in two keys that only differ by user timestamp getting processed by two different subcompactions (and thus two different CompactionIterator state machines), which in turn can cause data correction issues.
This PR provide support to reenable subcompactions with user-defined timestamps.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10344
Test Plan:
Added new unit test
- Without fix for Issue1 unit test MultipleSubCompactions fails with error:
```
db_with_timestamp_compaction_test: ./db/compaction/clipping_iterator.h:247: void rocksdb::ClippingIterat│
or::AssertBounds(): Assertion `!valid_ || !end_ || cmp_->Compare(key(), *end_) < 0' failed.
Received signal 6 (Aborted) │
#0 /usr/local/fbcode/platform009/lib/libc.so.6(gsignal+0x100) [0x7f8fbbbfe530] db_with_timestamp_compaction_test: ./db/compaction/clipping_iterator.h:247: void rocksdb::ClippingIterator::AssertBounds(): Assertion `!valid_ || !end_ || cmp_->Compare(key(), *end_) < 0' failed.
Aborted (core dumped)
```
Ran stress test
`make crash_test_with_ts -j32`
Reviewed By: riversand963
Differential Revision: D38220841
Pulled By: akankshamahajan15
fbshipit-source-id: 5d5cae2bd37fcaeba1e77fce0a69070ad4158ccb
Summary:
This PR changes the default value of
`CompactRangeOptions::exclusive_manual_compaction` from true to false so
manual `CompactRange()`s can run in parallel with other compactions. I
believe no artificial parallelism restriction is the intuitive behavior
so feel the old default value is a trap, which I have fallen into
several times, including yesterday.
`CompactRangeOptions::exclusive_manual_compaction == false` has been
used in both our correctness test and in production for years so should
be reasonably safe.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10317
Reviewed By: jay-zhuang
Differential Revision: D37659392
Pulled By: ajkr
fbshipit-source-id: 504915e978bbe300b79483d064070c75e93d91e5
Summary:
RocksDB's `Cache` abstraction currently supports two priority levels for items: high (used for frequently accessed/highly valuable SST metablocks like index/filter blocks) and low (used for SST data blocks). Blobs are typically lower-value targets for caching than data blocks, since 1) with BlobDB, data blocks containing blob references conceptually form an index structure which has to be consulted before we can read the blob value, and 2) cached blobs represent only a single key-value, while cached data blocks generally contain multiple KVs. Since we would like to make it possible to use the same backing cache for the block cache and the blob cache, it would make sense to add a new, lower-than-low cache priority level (bottom level) for blobs so data blocks are prioritized over them.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10309
Reviewed By: ltamasi
Differential Revision: D38211655
Pulled By: gangliao
fbshipit-source-id: 65ef33337db4d85277cc6f9782d67c421ad71dd5
Summary:
If WAL compression is enabled, WAL fragment decompression results are concatenated together in `log::Reader::ReadPhysicalRecord()`. This PR adds checksum handshake to protect memory corruption during the copying process.
`checksum` is renamed to `record_checksum` in `ReadRecord()` to differentiate it from `checksum_` flag that specifies whether CRC32C checksum is verified.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10339
Test Plan: added checksum verification in log_test.cc, `make check -j32`.
Reviewed By: ajkr
Differential Revision: D37763734
Pulled By: cbi42
fbshipit-source-id: c4faa7c76b9ff1df35026edf31adfe4b47ae3154
Summary:
In hash linked list, with a bucket of only one record, following sequence can cause users to temporarily miss a record:
Thread 1: Fetch the structure bucket x points too, which would be a Node n1 for a key, with next pointer to be null
Thread 2: Insert a key to bucket x that is larger than the existing key. This will make n1->next points to a new node n2, and update bucket x to point to n1.
Thread 1: see n1->next is not null, so it thinks it is a header of linked list and ignore the key of n1.
Fix it by refetch structure that bucket x points to when it sees n1->next is not null. This should work because if n1->next is not null, bucket x should already point to a linked list or skip list header.
A related change is to revert th order of testing for linked list and skip list. This is because after refetching the bucket, it might end up with a skip list, rather than linked list.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10401
Test Plan: Run existing tests and make sure at least it doesn't regress.
Reviewed By: jay-zhuang
Differential Revision: D38064471
fbshipit-source-id: 142bb85e1546c803f47e3357aef3e76debccd8df
Summary:
Unit tests still haven't been fixed. Also need to add more tests. But I ran some simple fillrandom db_bench and the partitioning feels reasonable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10393
Test Plan:
1. Make sure existing tests pass. This should cover some basic sub compaction logic to be correct and the partitioning result is reasonable;
2. Add a new unit test to ApproximateKeyAnchors()
3. Run some db_bench with max_subcompaction = 4 and watch the compaction is indeed partitioned evenly.
Reviewed By: jay-zhuang
Differential Revision: D38043783
fbshipit-source-id: 085008e0f85f9b7c5abff7800307618320efb19f
Summary:
## Problem Summary
RocksDB will acquire the global mutex of db instance for every time when user calls `Write`. When RocksDB schedules a lot of compaction jobs, it will compete the mutex with write thread and it will hurt the write performance.
## Problem Solution:
I want to use log_write_mutex to replace the global mutex in most case so that we do not acquire it in write-thread unless there is a write-stall event or a write-buffer-full event occur.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7516
Test Plan:
1. make check
2. CI
3. COMPILE_WITH_TSAN=1 make db_stress
make crash_test
make crash_test_with_multiops_wp_txn
make crash_test_with_multiops_wc_txn
make crash_test_with_atomic_flush
Reviewed By: siying
Differential Revision: D36908702
Pulled By: riversand963
fbshipit-source-id: 59b13881f4f5c0a58fd3ca79128a396d9cd98efe
Summary:
Made locking strict for all accesses of `GenericRateLimiter` internal state.
`SetBytesPerSecond()` was the main problem since it had no locking, while the two updates it makes need to be done as one atomic operation.
The test case, "ConfigOptionsTest.ConfiguringOptionsDoesNotRevertRateLimiterBandwidth", is for the issue fixed in https://github.com/facebook/rocksdb/issues/10378, but I forgot to include the test there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10374
Reviewed By: pdillinger
Differential Revision: D37906367
Pulled By: ajkr
fbshipit-source-id: ccde620d2a7f96d1401bdafd2bdb685cbefbafa5
Summary:
To help service owners to manage their memory budget effectively, we have been working towards counting all major memory users inside RocksDB towards a single global memory limit (see e.g. https://github.com/facebook/rocksdb/wiki/Write-Buffer-Manager#cost-memory-used-in-memtable-to-block-cache). The global limit is specified by the capacity of the block-based table's block cache, and is technically implemented by inserting dummy entries ("reservations") into the block cache. The goal of this task is to support charging the memory usage of the new blob cache against this global memory limit when the backing cache of the blob cache and the block cache are different.
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10321
Reviewed By: ltamasi
Differential Revision: D37913590
Pulled By: gangliao
fbshipit-source-id: eaacf23907f82dc7d18964a3f24d7039a2937a72
Summary:
(PR created for informational/testing purposes only.)
- Fixes lost dynamic updates to GenericRateLimiter bandwidth using `SetBytesPerSecond()`
- Benefit over #10374 is eliminating race conditions with Configurable framework.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10378
Reviewed By: pdillinger
Differential Revision: D37914865
fbshipit-source-id: d4f566d60ec9726d26932388c61671adf0ee0f30
Summary:
Many workloads have temporal locality, where recently written items are read back in a short period of time. When using remote file systems, this is inefficient since it involves network traffic and higher latencies. Because of this, we would like to support prepopulating the blob cache during flush.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10298
Reviewed By: ltamasi
Differential Revision: D37908743
Pulled By: gangliao
fbshipit-source-id: 9feaed234bc719d38f0c02975c1ad19fa4bb37d1
Summary:
RocksDB supports a two-level cache hierarchy (see https://rocksdb.org/blog/2021/05/27/rocksdb-secondary-cache.html), where items evicted from the primary cache can be spilled over to the secondary cache, or items from the secondary cache can be promoted to the primary one. We have a CacheLib-based non-volatile secondary cache implementation that can be used to improve read latencies and reduce the amount of network bandwidth when using distributed file systems. In addition, we have recently implemented a compressed secondary cache that can be used as a replacement for the OS page cache when e.g. direct I/O is used. The goals of this task are to add support for using a secondary cache with the blob cache and to measure the potential performance gains using `db_bench`.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10349
Reviewed By: ltamasi
Differential Revision: D37896773
Pulled By: gangliao
fbshipit-source-id: 7804619ce4a44b73d9e11ad606640f9385969c84
Summary:
Which will be used for tiered storage to preclude hot data from
compacting to the cold tier (the last level).
Internally, adding seqno to time mapping. A periodic_task is scheduled
to record the current_seqno -> current_time in certain cadence. When
memtable flush, the mapping informaiton is stored in sstable property.
During compaction, the mapping information are merged and get the
approximate time of sequence number, which is used to determine if a key
is recently inserted or not and preclude it from the last level if it's
recently inserted (within the `preclude_last_level_data_seconds`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338
Test Plan: CI
Reviewed By: siying
Differential Revision: D37810187
Pulled By: jay-zhuang
fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f
Summary:
Some items are misplaced to 7.4 but they are unreleased.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10362
Reviewed By: jay-zhuang
Differential Revision: D37859426
fbshipit-source-id: e2ad099227309ed2e0f3ca450a9a43986d681c7c
Summary:
InternalKeyComparator is an internal class which is a simple wrapper of Comparator. https://github.com/facebook/rocksdb/pull/8336 made Comparator customizeable. As a side effect, internal key comparator was made configurable too. This introduces overhead to this simple wrapper. For example, every InternalKeyComparator will have an std::vector attached to it, which consumes memory and possible allocation overhead too.
We remove InternalKeyComparator from being customizable by making InternalKeyComparator not a subclass of Comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10342
Test Plan: Run existing CI tests and make sure it doesn't fail
Reviewed By: riversand963
Differential Revision: D37771351
fbshipit-source-id: 917256ee04b2796ed82974549c734fb6c4d8ccee
Summary:
Enabled zstd checksum flag in StreamingCompress so that WAL (de)compreression is protected by a checksum per compression frame.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10319
Test Plan:
- `make check`
- WAL perf: average ops/sec over 10 runs is 161226 pre PR and 159635 post PR (1% drop).
```
sudo TEST_TMPDIR=/dev/shm/memtable_write ./db_bench_checksum -benchmarks=fillseq -max_write_buffer_number=100 -num=1000000 -min_write_buffer_number_to_merge=10 -wal_compression=zstd
```
Reviewed By: ajkr
Differential Revision: D37673311
Pulled By: cbi42
fbshipit-source-id: 9f34a3bfc2a82e5c80b1ec63bb339a7465108ec9
Summary:
ClockCache is still in experimental stage, and currently fails some pre-release fbcode tests. See https://www.internalfb.com/diff/D37772011. API calls to construct ClockCache are done via the function NewClockCache. For now, NewClockCache calls will return an LRUCache (with appropriate arguments), which is stable.
The idea that NewClockCache returns nullptr was also floated, but this would be interpreted as unsupported cache, and a default LRUCache would be constructed instead, potentially causing a performance regression that is harder to identify.
A new version of the NewClockCache function was created for our internal tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10351
Test Plan: ``make -j24 check`` and re-run the pre-release tests.
Reviewed By: pdillinger
Differential Revision: D37802685
Pulled By: guidotag
fbshipit-source-id: 0a8d10612ff21e576f7360cb13e20bc36e244972
Summary:
Add `ReserveThreads` and `ReleaseThreads` functions in thread pool to support reservation in for a specific thread pool. With this feature, a thread will be blocked if the number of waiting threads (noted by `num_waiting_threads_`) equals the number of reserved threads (noted by `reserved_threads_`), normally `reserved_threads_` is upper bounded by `num_waiting_threads_`; in rare cases (e.g. `SetBackgroundThreadsInternal` is called when some threads are already reserved), `num_waiting_threads_` can be less than `reserved_threads`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10278
Test Plan: Add `ReserveThreads` unit test in `env_test`. Update the unit test `SimpleColumnFamilyInfoTest` in `thread_list_test` with adding `ReserveThreads` related assertions.
Reviewed By: hx235
Differential Revision: D37640946
Pulled By: littlepig2013
fbshipit-source-id: 4d691f6b9a433569f96ab52d52c3defe5b065367
Summary:
I noticed it would clean up some things to have Cache::Insert()
return our MemoryLimit Status instead of Incomplete for the case in
which the capacity limit is reached. I suspect this fixes some existing but
unknown bugs where this Incomplete could be confused with other uses
of Incomplete, especially no_io cases. This is the most suspicious case I
noticed, but was not able to reproduce a bug, in part because the existing
code is not covered by unit tests (FIXME added): 57adbf0e91/table/get_context.cc (L397)
I audited all the existing uses of IsIncomplete and updated those that
seemed relevant.
HISTORY updated with a clear warning to users of strict_capacity_limit=true
to update uses of `IsIncomplete()`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10262
Test Plan: updated unit tests
Reviewed By: hx235
Differential Revision: D37473155
Pulled By: pdillinger
fbshipit-source-id: 4bd9d9353ccddfe286b03ebd0652df8ce20f99cb
Summary:
In leveled compaction, try to trivial move more than one files if possible, up to 4 files or max_compaction_bytes. This is to allow higher write throughput for some use cases where data is loaded in sequential order, where appying compaction results is the bottleneck.
When pick up a file to compact and it doesn't have overlapping files in the next level, try to expand to the next file if there is still no overlapping.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10190
Test Plan:
Add some unit tests.
For performance, Try to run
./db_bench_multi_move --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=5000000 --num=100000000 --value_size=1000 -level_compaction_dynamic_level_bytes
Together with https://github.com/facebook/rocksdb/pull/10188 , stalling will be eliminated in this benchmark.
Reviewed By: jay-zhuang
Differential Revision: D37230647
fbshipit-source-id: 42b260f545c46abc5d90335ac2bbfcd09602b549
Summary:
If dbname and db_log_dir are at different filesystems (one
local and one remote), creation of dbname will fail because that path
doesn't exist wrt to db_log_dir.
This patch will ignore the error returned on creation of dbname. If they
are on same filesystem, db_log_dir creation will automatically return
the error in case there is any error in creation of dbname.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10292
Test Plan: Existing unit tests
Reviewed By: riversand963
Differential Revision: D37567773
Pulled By: akankshamahajan15
fbshipit-source-id: 005d28c536208d4c126c8cb8e196d1d85b881100
Summary:
In leveled compaction, L0->L1 trivial move will allow more than one file to be moved in one compaction. This would allow L0 files to be moved down faster when data is loaded in sequential order, making slowdown or stop condition harder to hit. Also seek L0->L1 trivial move when only some files qualify.
1. We always try to find L0->L1 trivial move from the oldest files. Keep including newer files, until adding a new file won't trigger a trivial move
2. Modify the trivial move condition so that this compaction would be tagged as trivial move.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10188
Test Plan:
See throughput improvements with db_bench with fast fillseq benchmark and small L0 files:
./db_bench_l0_move --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=5000000 --num=100000000 --value_size=1000 -level_compaction_dynamic_level_bytes
The throughput improved by about 50%. Stalling still happens though.
Reviewed By: jay-zhuang
Differential Revision: D37224743
fbshipit-source-id: 8958d97f22e12bdfc14d2e85930f6fa0070e9659
Summary:
The current level targets for dynamical leveling has a problem: the target level size will dramatically change after a L0->L1 compaction. When there are many L0 bytes, lower level compactions are delayed, but they will be resumed after the L0->L1 compaction finishes, so the expected write amplification benefits might not be realized. The proposal here is to revert the level targetting size, but instead relying on adjusting score for each level to prioritize levels that need to compact most.
Basic idea:
(1) target level size isn't adjusted, but score is adjusted. The reasoning is that with parallel compactions, holding compactions from happening might not be desirable, but we would like the compactions are scheduled from the level we feel most needed. For example, if we have a extra-large L2, we would like all compactions are scheduled for L2->L3 compactions, rather than L4->L5. This gets complicated when a large L0->L1 compaction is going on. Should we compact L2->L3 or L4->L5. So the proposal for that is:
(2) the score is calculated by actual level size / (target size + estimated upper bytes coming down). The reasoning is that if we have a large amount of pending L0/L1 bytes coming down, compacting L2->L3 might be more expensive, as when the L0 bytes are compacted down to L2, the actual L2->L3 fanout would change dramatically. On the other hand, when the amount of bytes coming down to L5, the impacts to L5->L6 fanout are much less. So when calculating target score, we can adjust it by adding estimated downward bytes to the target level size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10057
Test Plan: Repurpose tests VersionStorageInfoTest.MaxBytesForLevelDynamicWithLargeL0_* tests to cover this scenario.
Reviewed By: ajkr
Differential Revision: D37539742
fbshipit-source-id: 9c154cbfe92023f918cf5d80875d8776ad4831a4
Summary:
Currently, when installing a new super version, when stalling condition triggers, we compare estimated compaction bytes to previously, and if the new value is larger or equal to the previous one, we reduce the slowdown write rate. However, if concurrent compactions happen, the same value might be used. The result is that, although some compactions reduce estimated compaction bytes, we treat them as a signal for further slowing down. In some cases, it causes slowdown rate drops all the way to the minimum, far lower than needed.
Fix the bug by not triggering a re-calculation if a new super version doesn't have Version or a memtable change. With this fix, number of compaction finishes are still undercounted in this algorithm, but it is still better than the current bug where they are negatively counted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10270
Test Plan: Run a benchmark where the slowdown rate is dropped to minimal unnessarily and see it is back to a normal value.
Reviewed By: ajkr
Differential Revision: D37497327
fbshipit-source-id: 9bca961cc38fed965c3af0fa6c9ca0efaa7637c4
Summary:
Resolves https://github.com/facebook/rocksdb/issues/9761
With this PR, applications can create an iterator with the following
```cpp
ReadOptions read_opts;
read_opts.timestamp = &ts_ub;
read_opts.iter_start_ts = &ts_lb;
auto* it = db->NewIterator(read_opts);
it->SeekToLast();
// or it->SeekForPrev("foo");
it->Prev();
...
```
The application can access different versions of the same user key via `key()`, `value()`, and `timestamp()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10200
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D37258074
Pulled By: riversand963
fbshipit-source-id: 3f0b866ade50dcff7ef60d506397a9dd6ec91565
Summary:
Currently SortFileByOverlappingRatio() is O(nlogn). It is usually OK but When there are a lot of files in an LSM-tree, SortFileByOverlappingRatio() can take non-trivial amount of time. The problem is severe when the user is loading keys in sorted order, where compaction is only trivial move and this operation becomes the bottleneck and limit the total throughput. This commit makes SortFileByOverlappingRatio() only find the top 50 files based on score. 50 files are usually enough for the parallel compactions needed for the level, and in case it is not enough, we would fall back to random, which should be acceptable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10161
Test Plan:
Run a fillseq that generates a lot of files, and observe throughput improved (although stall is not yet eliminated). The command ran:
TEST_TMPDIR=/dev/shm/ ./db_bench_sort --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=5000000 --num=100000000 --value_size=1000
The throughput improved by 11%.
Reviewed By: jay-zhuang
Differential Revision: D37129469
fbshipit-source-id: 492da2ef5bfc7cdd6daa3986b50d2ff91f88542d
Summary:
Resolves https://github.com/facebook/rocksdb/issues/10129
I extracted this fix from https://github.com/facebook/rocksdb/issues/7516 since it's also already a bug in main branch, and we want to
separate it from the main part of the PR.
There can be a race condition between two threads. Thread 1 executes
`DBImpl::FindObsoleteFiles()` while thread 2 executes `GetSortedWals()`.
```
Time thread 1 thread 2
| mutex_.lock
| read disable_delete_obsolete_files_
| ...
| wait on log_sync_cv and release mutex_
| mutex_.lock
| ++disable_delete_obsolete_files_
| mutex_.unlock
| mutex_.lock
| while (pending_purge_obsolete_files > 0) { bg_cv.wait;}
| wake up with mutex_ locked
| compute WALs tracked by MANIFEST
| mutex_.unlock
| wake up with mutex_ locked
| ++pending_purge_obsolete_files_
| mutex_.unlock
|
| delete obsolete WAL
| WAL missing but tracked in MANIFEST.
V
```
The fix proposed eliminates the possibility of the above by increasing
`pending_purge_obsolete_files_` before `FindObsoleteFiles()` can possibly release the mutex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10187
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D37214235
Pulled By: riversand963
fbshipit-source-id: 556ab1b58ae6d19150169dfac4db08195c797184
Summary:
Add suggest_compact_range() and suggest_compact_range_cf() to C API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10175
Test Plan:
As verifying the result requires SyncPoint, which is not available in the c_test.c,
the test is currently done by invoking the functions and making sure it does not crash.
Reviewed By: jay-zhuang
Differential Revision: D37305191
Pulled By: ajkr
fbshipit-source-id: 0fe257b45914f6c9aeb985d8b1820dafc57a20db
Summary:
**Summary**
Make the mempurge option flag a Mutable Column Family option flag. Therefore, the mempurge feature can be dynamically toggled.
**Motivation**
RocksDB users prefer having the ability to switch features on and off without having to close and reopen the DB. This is particularly important if the feature causes issues and needs to be turned off. Dynamically changing a DB option flag does not seem currently possible.
Moreover, with this new change, the MemPurge feature can be toggled on or off independently between column families, which we see as a major improvement.
**Content of this PR**
This PR includes removal of the `experimental_mempurge_threshold` flag as a DB option flag, and its re-introduction as a `MutableCFOption` flag. I updated the code to handle dynamic changes of the flag (in particular inside the `FlushJob` file). Additionally, this PR includes a new test to demonstrate the capacity of the code to toggle the MemPurge feature on and off, as well as the addition in the `db_stress` module of 2 different mempurge threshold values (0.0 and 1.0) that can be randomly changed with the `set_option_one_in` flag. This is useful to stress test the dynamic changes.
**Benchmarking**
I will add numbers to prove that there is no performance impact within the next 12 hours.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10011
Reviewed By: pdillinger
Differential Revision: D36462357
Pulled By: bjlemaire
fbshipit-source-id: 5e3d63bdadf085c0572ecc2349e7dd9729ce1802
Summary:
* Add metadata related structs and functions in C API, including
- `rocksdb_get_column_family_metadata()` and `rocksdb_get_column_family_metadata_cf()`
that returns `rocksdb_column_family_metadata_t`.
- `rocksdb_column_family_metadata_t` and its get functions & destroy function.
- `rocksdb_level_metadata_t` and its and its get functions & destroy function.
- `rocksdb_file_metadata_t` and its and get functions & destroy functions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10207
Test Plan:
Extend the existing c_test.c to include additional checks for column_family_metadata
inside CheckCompaction.
Reviewed By: riversand963
Differential Revision: D37305209
Pulled By: ajkr
fbshipit-source-id: 0a5183206353acde145f5f9b632c3bace670aa6e
Summary:
There was a bug in the MultiGet enhancement in https://github.com/facebook/rocksdb/issues/9899 with data
block hash index, which was not caught because data block hash index was
never added to stress tests. This change fixes both issues.
Fixes https://github.com/facebook/rocksdb/issues/10186
I intend to pick this into the 7.4.0 release candidate
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10220
Test Plan:
Failure quickly reproduces in crash test with
kDataBlockBinaryAndHash, and does not seem to with the fix. Reproducing
the failure with a unit test I believe would be too tricky and fragile
to be worthwhile.
Reviewed By: anand1976
Differential Revision: D37315647
Pulled By: pdillinger
fbshipit-source-id: 9f648265bba867275edc752f7a56611a59401cba
Summary:
This bug was discovered after write batch checksum verification before WAL is added (https://github.com/facebook/rocksdb/issues/10114) and stress test with write batch checksum protection is turned on (https://github.com/facebook/rocksdb/issues/10037). In this [line](d5d8920f2c/db/write_batch.cc (L2887)), the number of checksums may not be consistent with `batch->Count()`. This PR fixes this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10201
Test Plan:
```
./db_stress --batch_protection_bytes_per_key=8 --destroy_db_initially=1 --max_key=100000 --use_txn=1
```
Reviewed By: ajkr
Differential Revision: D37260799
Pulled By: cbi42
fbshipit-source-id: ff8dce7dcce295d689333bc9d892d17a843bf0ea
Summary:
`FlushWAL(true /* sync */)` is used internally and for manual WAL sync. It had a bug when used together with `track_and_verify_wals_in_manifest` where the synced size tracked in MANIFEST was larger than the number of bytes actually synced.
The bug could be repro'd almost immediately with the following crash test command: `python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --max_bytes_for_level_base=2097152 --target_file_size_base=524288 --duration=3600 --interval=10 --sync_fault_injection=1 --disable_wal=0 --checkpoint_one_in=1000 --max_key=10000 --value_size_mult=33`.
An example error message produced by the above command is shown below. The error sometimes arose from the checkpoint and other times arose from the main stress test DB.
```
Corruption: Size mismatch: WAL (log number: 119) in MANIFEST is 27938 bytes , but actually is 27859 bytes on disk.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10185
Test Plan:
- repro unit test
- the above crash test command no longer finds the error. It does find a different error after a while longer such as "Corruption: WAL file 481 required by manifest but not in directory list"
Reviewed By: riversand963
Differential Revision: D37200993
Pulled By: ajkr
fbshipit-source-id: 98e0071c1a89f4d009888512ed89f9219779ae5f
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/9424 added rate-limiting support for user reads, which does not include batched `MultiGet()`s that call `RandomAccessFileReader::MultiRead()`. The reason is that it's harder (compared with RandomAccessFileReader::Read()) to implement the ideal rate-limiting where we first call `RateLimiter::RequestToken()` for allowed bytes to multi-read and then consume those bytes by satisfying as many requests in `MultiRead()` as possible. For example, it can be tricky to decide whether we want partially fulfilled requests within one `MultiRead()` or not.
However, due to a recent urgent user request, we decide to pursue an elementary (but a conditionally ineffective) solution where we accumulate enough rate limiter requests toward the total bytes needed by one `MultiRead()` before doing that `MultiRead()`. This is not ideal when the total bytes are huge as we will actually consume a huge bandwidth from rate-limiter causing a burst on disk. This is not what we ultimately want with rate limiter. Therefore a follow-up work is noted through TODO comments.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10159
Test Plan:
- Modified existing unit test `DBRateLimiterOnReadTest/DBRateLimiterOnReadTest.NewMultiGet`
- Traced the underlying system calls `io_uring_enter` and verified they are 10 seconds apart from each other correctly under the setting of `strace -ftt -e trace=io_uring_enter ./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb2 -readonly -num=50 -threads=1 -multiread_batched=1 -batch_size=100 -duration=10 -rate_limiter_bytes_per_sec=200 -rate_limiter_refill_period_us=1000000 -rate_limit_bg_reads=1 -disable_auto_compactions=1 -rate_limit_user_ops=1` where each `MultiRead()` read about 2000 bytes (inspected by debugger) and the rate limiter grants 200 bytes per seconds.
- Stress test:
- Verified `./db_stress (-test_cf_consistency=1/test_batches_snapshots=1) -use_multiget=1 -cache_size=1048576 -rate_limiter_bytes_per_sec=10241024 -rate_limit_bg_reads=1 -rate_limit_user_ops=1` work
Reviewed By: ajkr, anand1976
Differential Revision: D37135172
Pulled By: hx235
fbshipit-source-id: 73b8e8f14761e5d4b77235dfe5d41f4eea968bcd
Summary:
folly DistributedMutex is faster than standard mutexes though
imposes some static obligations on usage. See
https://github.com/facebook/folly/blob/main/folly/synchronization/DistributedMutex.h
for details. Here we use this alternative for our Cache implementations
(especially LRUCache) for better locking performance, when RocksDB is
compiled with folly.
Also added information about which distributed mutex implementation is
being used to cache_bench output and to DB LOG.
Intended follow-up:
* Use DMutex in more places, perhaps improving API to support non-scoped
locking
* Fix linking with fbcode compiler (needs ROCKSDB_NO_FBCODE=1 currently)
Credit: Thanks Siying for reminding me about this line of work that was previously
left unfinished.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10179
Test Plan:
for correctness, existing tests. CircleCI config updated.
Also Meta-internal buck build updated.
For performance, ran simultaneous before & after cache_bench. Out of three
comparison runs, the middle improvement to ops/sec was +21%:
Baseline: USE_CLANG=1 DEBUG_LEVEL=0 make -j24 cache_bench (fbcode
compiler)
```
Complete in 20.201 s; Rough parallel ops/sec = 1584062
Thread ops/sec = 107176
Operation latency (ns):
Count: 32000000 Average: 9257.9421 StdDev: 122412.04
Min: 134 Median: 3623.0493 Max: 56918500
Percentiles: P50: 3623.05 P75: 10288.02 P99: 30219.35 P99.9: 683522.04 P99.99: 7302791.63
```
New: (add USE_FOLLY=1)
```
Complete in 16.674 s; Rough parallel ops/sec = 1919135 (+21%)
Thread ops/sec = 135487
Operation latency (ns):
Count: 32000000 Average: 7304.9294 StdDev: 108530.28
Min: 132 Median: 3777.6012 Max: 91030902
Percentiles: P50: 3777.60 P75: 10169.89 P99: 24504.51 P99.9: 59721.59 P99.99: 1861151.83
```
Reviewed By: anand1976
Differential Revision: D37182983
Pulled By: pdillinger
fbshipit-source-id: a17eb05f25b832b6a2c1356f5c657e831a5af8d1
Summary:
Added an option, `WriteOptions::protection_bytes_per_key`, that controls how many bytes per key we use for integrity protection in `WriteBatch`. It takes effect when `WriteBatch::GetProtectionBytesPerKey() == 0`.
Currently the only supported value is eight. Invoking a user API with it set to any other nonzero value will result in `Status::NotSupported` returned to the user.
There is also a bug fix for integrity protection with `inplace_callback`, where we forgot to take into account the possible change in varint length when calculating KV checksum for the final encoded buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10037
Test Plan:
- Manual
- Set default value of `WriteOptions::protection_bytes_per_key` to eight and ran `make check -j24`
- Enabled in MyShadow for 1+ week
- Automated
- Unit tests have a `WriteMode` that enables the integrity protection via `WriteOptions`
- Crash test - in most cases, use `WriteOptions::protection_bytes_per_key` to enable integrity protection
Reviewed By: cbi42
Differential Revision: D36614569
Pulled By: ajkr
fbshipit-source-id: 8650087ceac9b61b560f1e5fafe5e1baf9c725fb
Summary:
In https://github.com/facebook/rocksdb/issues/9535, release 7.0, we hid the old block-based filter from being created using
the public API, because of its inefficiency. Although we normally maintain read compatibility
on old DBs forever, filters are not required for reading a DB, only for optimizing read
performance. Thus, it should be acceptable to remove this code and the substantial
maintenance burden it carries as useful features are developed and validated (such
as user timestamp).
This change completely removes the code for reading and writing the old block-based
filters, net removing about 1370 lines of code no longer needed. Options removed from
testing / benchmarking tools. The prior existence is only evident in a couple of places:
* `CacheEntryRole::kDeprecatedFilterBlock` - We can update this public API enum in
a major release to minimize source code incompatibilities.
* A warning is logged when an old table file is opened that used the old block-based
filter. This is provided as a courtesy, and would be a pain to unit test, so manual testing
should suffice. Unfortunately, sst_dump does not tell you whether a file uses
block-based filter, and the structure of the code makes it very difficult to fix.
* To detect that case, `kObsoleteFilterBlockPrefix` (renamed from `kFilterBlockPrefix`)
for metaindex is maintained (for now).
Other notes:
* In some cases where numbers are associated with filter configurations, we have had to
update the assigned numbers so that they all correspond to something that exists.
* Fixed potential stat counting bug by assuming `filter_checked = false` for cases
like `filter == nullptr` rather than assuming `filter_checked = true`
* Removed obsolete `block_offset` and `prefix_extractor` parameters from several
functions.
* Removed some unnecessary checks `if (!table_prefix_extractor() && !prefix_extractor)`
because the caller guarantees the prefix extractor exists and is compatible
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10184
Test Plan:
tests updated, manually test new warning in LOG using base version to
generate a DB
Reviewed By: riversand963
Differential Revision: D37212647
Pulled By: pdillinger
fbshipit-source-id: 06ee020d8de3b81260ffc36ad0c1202cbf463a80
Summary:
Add a couple of stats to help users estimate the impact of potential MultiGet perf improvements -
1. NUM_LEVEL_READ_PER_MULTIGET - A histogram stat for number of levels that required MultiGet to read from a file
2. MULTIGET_COROUTINE_COUNT - A ticker stat to count the number of times the coroutine version of MultiGetFromSST was used
The NUM_DATA_BLOCKS_READ_PER_LEVEL stat is obsoleted as it doesn't provide useful information for MultiGet optimization.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10182
Reviewed By: akankshamahajan15
Differential Revision: D37213296
Pulled By: anand1976
fbshipit-source-id: 5d2b7708017c0e278578ae4bffac3926f6530efb
Summary:
A consequence of https://github.com/facebook/rocksdb/issues/9990 was requiring a non-empty DB ID to generate
new SST files. But if the DB ID is not tracked in the manifest and the IDENTITY file
is somehow truncated to 0 bytes, then an empty DB ID would be assigned, leading
to crash. This change ensures a non-empty DB ID is assigned and set in the
IDENTITY file.
Also,
* Some light refactoring to clean up the logic
* (I/O efficiency) If the ID is tracked in the manifest and already matches the
IDENTITY file, don't needlessly overwrite the file.
* (Debugging) Log the DB ID to info log on open, because sometimes IDENTITY
can change if DB is moved around (though it would be unusual for info log to
be copied/moved without IDENTITY file)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10173
Test Plan: unit tests expanded/updated
Reviewed By: ajkr
Differential Revision: D37176545
Pulled By: pdillinger
fbshipit-source-id: a9b414cd35bfa33de48af322a36c24538d50bef1
Hui Xiao