Summary:
Make (most of) the env*_test pass when ASSERT_STATUS_CHECKED is enabled.
One test that opens a database is currently disabled in this mode, as there are many errors that need revisited for DB tests and status checks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7176
Reviewed By: cheng-chang
Differential Revision: D22799278
Pulled By: ajkr
fbshipit-source-id: 16d8a02eaeecd6df1060249b6a5811292801f2ed
Summary:
If both direct IO and IO uring are enabled, when IO uring returns partial result, we'll try to read the remaining part of the request, but the starting address/offset of the remaining part might not be aligned to the block size, in direct IO mode, the unaligned offset causes bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6853
Test Plan: run make check with both direct IO and IO uring enabled, this is covered by one of the continuous tests.
Reviewed By: anand1976
Differential Revision: D21603023
Pulled By: cheng-chang
fbshipit-source-id: 942f6a11ff21e1892af6c4464e02bab4c707787c
Summary:
In release mode, asserts are not compiled, so `r` is not used, causing compiler warnings.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6750
Test Plan: make check under release mode
Reviewed By: anand1976
Differential Revision: D21220365
Pulled By: cheng-chang
fbshipit-source-id: fd4afa9843d54af68c4da8660ec61549803e1167
Summary:
This change updates PosixSequentialFile::Read to call clearerr()
before fread()ing again after an EINTR is returned on a previous
fread.
The original fix is from bd8f1ebb91.
Fixing https://github.com/facebook/rocksdb/issues/6509
Signed-off-by: phantomape <cxucheng@outlook.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6609
Reviewed By: zhichao-cao
Differential Revision: D20731482
Pulled By: riversand963
fbshipit-source-id: 7f1f3a1449077d5560f45c465a78d08633740ba0
Summary:
In Linux, when reopening DB with many SST files, profiling shows that 100% system cpu time spent for a couple of seconds for `GetLogicalBufferSize`. This slows down MyRocks' recovery time when site is down.
This PR introduces two new APIs:
1. `Env::RegisterDbPaths` and `Env::UnregisterDbPaths` lets `DB` tell the env when it starts or stops using its database directories . The `PosixFileSystem` takes this opportunity to set up a cache from database directories to the corresponding logical block sizes.
2. `LogicalBlockSizeCache` is defined only for OS_LINUX to cache the logical block sizes.
Other modifications:
1. rename `logical buffer size` to `logical block size` to be consistent with Linux terms.
2. declare `GetLogicalBlockSize` in `PosixHelper` to expose it to `PosixFileSystem`.
3. change the functions `IOError` and `IOStatus` in `env/io_posix.h` to have external linkage since they are used in other translation units too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6457
Test Plan:
1. A new unit test is added for `LogicalBlockSizeCache` in `env/io_posix_test.cc`.
2. A new integration test is added for `DB` operations related to the cache in `db/db_logical_block_size_cache_test.cc`.
`make check`
Differential Revision: D20131243
Pulled By: cheng-chang
fbshipit-source-id: 3077c50f8065c0bffb544d8f49fb10bba9408d04
Summary:
The logic that handles io_uring partial results was wrong. Fix the logic by putting it into a queue and continue reading.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6441
Test Plan: Make sure this patch fixes the application test case where the bug was discovered; in env_test, add a unit test that simulates partial results and make sure the results are still correct.
Differential Revision: D20018616
fbshipit-source-id: 5398a7e34d74c26d52aa69dfd604e93e95d99c62
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
ASAN reports:
internal_repo_rocksdb/repo:db_test - MultiThreaded/MultiThreadedDBTest.MultiThreaded/43: fatal
==2692739==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6130000500ca at pc 0x0000006be780 bp 0x7efef85ccd20 sp 0x7efef85cc4d0
[CONTEXT] === How to use this, how to get the raw stack trace, and more: fburl.com/ASAN ===
[CONTEXT] READ of size 331 at 0x6130000500ca thread T195
[CONTEXT] #0 db_test_bin+0x6be77f __interceptor_strlen.part.35
[CONTEXT] https://github.com/facebook/rocksdb/issues/1 internal_repo_rocksdb/repo/include/rocksdb/slice.h:55 rocksdb::Slice::Slice(char const*)
[CONTEXT] https://github.com/facebook/rocksdb/issues/2 internal_repo_rocksdb/repo/env/io_posix.cc:522 rocksdb::PosixRandomAccessFile::MultiRead(rocksdb::ReadRequest*, unsigned long)
I looked at env/io_posix.cc:522 but don't see a reason why the line needs to be there at all, because it is not used before overwritten. So it must be a line that is put there as a bug. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6135
Test Plan: Rerun the same test which passes after the fix. Run all the tests and make sure they all pass.
Differential Revision: D18880251
fbshipit-source-id: 3b84ac6a05b67b529c4202e0ceb4c047460f44f2
Summary:
Right now, PosixRandomAccessFile::MultiRead() executes read requests in parallel. In this PR, it leverages I/O Uring library to run it in parallel, even when page cache is enabled. This function will fall back if the kernel version doesn't support it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5881
Test Plan: Run the unit test on a kernel version supporting it and make sure all tests pass, and run a unit test on kernel version supporting it and see it pass. Before merging, will also run stress test and see it passes.
Differential Revision: D17742266
fbshipit-source-id: e05699c925ac04fdb42379456a4e23e4ebcb803a
Summary:
Current PosixLogger performs IO operations using posix calls. Thus the
current implementation will not work for non-posix env. Created a new
logger class EnvLogger that uses env specific WritableFileWriter for IO operations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5491
Test Plan: make check
Differential Revision: D15909002
Pulled By: ggaurav28
fbshipit-source-id: 13a8105176e8e42db0c59798d48cb6a0dbccc965
Summary:
`sync_file_range` returns `ENOSYS` on Windows Subsystem for Linux even
when using a supposedly supported filesystem like ext4. To handle this
case we can do a dynamic check that a no-op `sync_file_range`
invocation, which is accomplished by passing zero for the `flags`
argument, succeeds.
Also I rearranged the function and comments to hopefully make it more
easily understandable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5416
Differential Revision: D15807061
fbshipit-source-id: d31d94e1f228b7850ea500e6199f8b5daf8cfbd3
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
This is a workaround for the issue described in #5169.
It has been tested on a database with very large values, but not dedicated test has been added to the code base.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5213
Differential Revision: D15243116
Pulled By: siying
fbshipit-source-id: e0c226a6cd71a60924dcd7ce7af74abcb4054484
Summary:
The existing implementation does not guarantee bytes reach disk every `bytes_per_sync` when writing SST files, or every `wal_bytes_per_sync` when writing WALs. This can cause confusing behavior for users who enable this feature to avoid large syncs during flush and compaction, but then end up hitting them anyways.
My understanding of the existing behavior is we used `sync_file_range` with `SYNC_FILE_RANGE_WRITE` to submit ranges for async writeback, such that we could continue processing the next range of bytes while that I/O is happening. I believe we can preserve that benefit while also limiting how far the processing can get ahead of the I/O, which prevents huge syncs from happening when the file finishes.
Consider this `sync_file_range` usage: `sync_file_range(fd_, 0, static_cast<off_t>(offset + nbytes), SYNC_FILE_RANGE_WAIT_BEFORE | SYNC_FILE_RANGE_WRITE)`. Expanding the range to start at 0 and adding the `SYNC_FILE_RANGE_WAIT_BEFORE` flag causes any pending writeback (like from a previous call to `sync_file_range`) to finish before it proceeds to submit the latest `nbytes` for writeback. The latest `nbytes` are still written back asynchronously, unless processing exceeds I/O speed, in which case the following `sync_file_range` will need to wait on it.
There is a second change in this PR to use `fdatasync` when `sync_file_range` is unavailable (determined statically) or has some known problem with the underlying filesystem (determined dynamically).
The above two changes only apply when the user enables a new option, `strict_bytes_per_sync`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5183
Differential Revision: D14953553
Pulled By: siying
fbshipit-source-id: 445c3862e019fb7b470f9c7f314fc231b62706e9
Summary:
User report has shown that sometimes `BlockBasedTable::SetupCacheKeyPrefix` would assert when trying to generate an id from the file. The actual cause seems to be hardware related but we might be better off without the incorrect assertion
See T42178927 for more information
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5102
Differential Revision: D14604677
Pulled By: miasantreble
fbshipit-source-id: fcb09207ebdc4fa66e941afbc0523d84797e7ad7
Summary:
[RocksDB] Make it easier for users to load options from option file and set shared block cache.
Right now, it requires several dynamic casting for users to set the shared block cache to their option struct cast from the option file.
If people don't do that, every CF of every DB will generate its own 8MB block cache. It's not a usable setting. So we are dragging every user who loads options from the file into such a mess.
Instead, we should allow them to pass their cache object to LoadLatestOptions() and LoadOptionsFromFile(), so that those loaded option structs will have the shared block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5063
Differential Revision: D14518584
Pulled By: rashmishrm
fbshipit-source-id: c91430ff9425a0e67d76fc67931d755f491ca5aa
Summary:
The compiler flag `-DROCKSDB_FALLOCATE_PRESENT` was only set when
`fallocate`, `FALLOC_FL_KEEP_SIZE`, and `FALLOC_FL_PUNCH_HOLE` were all
present. However, the last of the three is not really necessary for the
primary `fallocate` use case; furthermore, it was introduced only in later
Linux kernel versions (2.6.38+).
This PR changes the flag `-DROCKSDB_FALLOCATE_PRESENT` to only require
`fallocate` and `FALLOC_FL_KEEP_SIZE` to be present. There is a separate
check for `FALLOC_FL_PUNCH_HOLE` only in the place where it is used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5023
Differential Revision: D14248487
Pulled By: siying
fbshipit-source-id: a10ed0b902fa755988e957bd2dcec9081ec0502e
Summary:
nvme device path doesn't have "block" as like "nvme/nvme0/nvme0n1"
or "nvme/nvme0/nvme0n1/nvme0n1p1". the last directory such as
"nvme0n1p1" should be removed if nvme drive is partitioned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4866
Differential Revision: D13627824
Pulled By: riversand963
fbshipit-source-id: 09ab968f349f3dbb890beea20193f1359b17d317
Summary:
Moved the direct-IO assertion to the top in `PosixSequentialFile::PositionedRead`, as it doesn't make sense to check for sector alignments before checking for direct IO.
Closes https://github.com/facebook/rocksdb/pull/3891
Differential Revision: D8267972
Pulled By: sagar0
fbshipit-source-id: 0ecf77c0fb5c35747a4ddbc15e278918c0849af7
Summary:
```PosixMmapReadableFile::fd_``` is closed after created, but needs to remain open for the lifetime of `PosixMmapReadableFile` since it is used whenever `InvalidateCache` is called.
Closes https://github.com/facebook/rocksdb/pull/2764
Differential Revision: D8152515
Pulled By: ajkr
fbshipit-source-id: b738a6a55ba4e392f9b0f374ff396a1e61c64f65
Summary:
Catch up with Posix features
NewWritableRWFile must fail when file does not exists
Implement Env::Truncate()
Adjust Env options optimization functions
Implement MemoryMappedBuffer on Windows.
Closes https://github.com/facebook/rocksdb/pull/3857
Differential Revision: D8053610
Pulled By: ajkr
fbshipit-source-id: ccd0d46c29648a9f6f496873bc1c9d6c5547487e
Summary:
- Original commit: a4fb1f8c04
- Revert commit (we reverted as a quick fix to get crash tests passing): 6afe22db2e
This PR includes the contents of the original commit plus two bug fixes, which are:
- In whitebox crash test, only set `--expected_values_path` for `db_stress` runs in the first half of the crash test's duration. In the second half, a fresh DB is created for each `db_stress` run, so we cannot maintain expected state across `db_stress` runs.
- Made `Exists()` return true for `UNKNOWN_SENTINEL` values. I previously had an assert in `Exists()` that value was not `UNKNOWN_SENTINEL`. But it is possible for post-crash-recovery expected values to be `UNKNOWN_SENTINEL` (i.e., if the crash happens in the middle of an update), in which case this assertion would be tripped. The effect of returning true in this case is there may be cases where a `SingleDelete` deletes no data. But if we had returned false, the effect would be calling `SingleDelete` on a key with multiple older versions, which is not supported.
Closes https://github.com/facebook/rocksdb/pull/3793
Differential Revision: D7811671
Pulled By: ajkr
fbshipit-source-id: 67e0295bfb1695ff9674837f2e05bb29c50efc30
Summary:
crash-recovery verification is failing in the whitebox testing, which may or may not be a valid correctness issue -- need more time to investigate. In the meantime, reverting so we don't mask other failures.
Closes https://github.com/facebook/rocksdb/pull/3786
Differential Revision: D7794516
Pulled By: ajkr
fbshipit-source-id: 28ccdfdb9ec9b3b0fb08c15cbf9d2e282201ff33
Summary:
Previously, our `db_stress` tool held the expected state of the DB in-memory, so after crash-recovery, there was no way to verify data correctness. This PR adds an option, `--expected_values_file`, which specifies a file holding the expected values.
In black-box testing, the `db_stress` process can be killed arbitrarily, so updates to the `--expected_values_file` must be atomic. We achieve this by `mmap`ing the file and relying on `std::atomic<uint32_t>` for atomicity. Actually this doesn't provide a total guarantee on what we want as `std::atomic<uint32_t>` could, in theory, be translated into multiple stores surrounded by a mutex. We can verify our assumption by looking at `std::atomic::is_always_lock_free`.
For the `mmap`'d file, we didn't have an existing way to expose its contents as a raw memory buffer. This PR adds it in the `Env::NewMemoryMappedFileBuffer` function, and `MemoryMappedFileBuffer` class.
`db_crashtest.py` is updated to use an expected values file for black-box testing. On the first iteration (when the DB is created), an empty file is provided as `db_stress` will populate it when it runs. On subsequent iterations, that same filename is provided so `db_stress` can check the data is as expected on startup.
Closes https://github.com/facebook/rocksdb/pull/3629
Differential Revision: D7463144
Pulled By: ajkr
fbshipit-source-id: c8f3e82c93e045a90055e2468316be155633bd8b
Summary:
this PR fixes a few failed contbuild:
1. ASAN memory leak in Block::NewIterator (table/block.cc:429). the proper destruction of first_level_iter_ and second_level_iter_ of two_level_iterator.cc is missing from the code after the refactoring in https://github.com/facebook/rocksdb/pull/3406
2. various unused param errors introduced by https://github.com/facebook/rocksdb/pull/3662
3. updated comment for `ForceReleaseCachedEntry` to emphasize the use of `force_erase` flag.
Closes https://github.com/facebook/rocksdb/pull/3718
Reviewed By: maysamyabandeh
Differential Revision: D7621192
Pulled By: miasantreble
fbshipit-source-id: 476c94264083a0730ded957c29de7807e4f5b146
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
Add ROCKSDB_VALGRIND_RUN macro and suppress false-positive "unimplemented functionality" throw by valgrind for steam hints.
Another approach would be add a valgrind suppress file. Valgrind is suppose to print the suppression when given "--gen-suppressions=all" param, which is suppose to be the content for the suppression file. But it doesn't print.
Closes https://github.com/facebook/rocksdb/pull/3174
Differential Revision: D6338786
Pulled By: yiwu-arbug
fbshipit-source-id: 3559efa5f3b92d40d09ad6ac82bc7b59f86c75aa
Summary:
Add a simple policy for NVMe write time life hint
Closes https://github.com/facebook/rocksdb/pull/3095
Differential Revision: D6298030
Pulled By: shligit
fbshipit-source-id: 9a72a42e32e92193af11599eb71f0cf77448e24d
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
We has to remove this line because previously it is only called when use_os_buffer = false. But now we have direct io to replace it.
Closes https://github.com/facebook/rocksdb/pull/2573
Differential Revision: D5412824
Pulled By: yiwu-arbug
fbshipit-source-id: 81f3f0cdf94566bfc09ef2ff123e40cddbe36b36
Summary:
Force people to write something other than file name while returning status for IOError.
Closes https://github.com/facebook/rocksdb/pull/2493
Differential Revision: D5321309
Pulled By: siying
fbshipit-source-id: 38bcf6c19e80831cd3e300a047e975cbb131d822
Summary:
We had a crash in this code: `fstat()` failed; `file_stats` contained garbage, in particular `file_stats.st_blksize == 6`; the expression `file_stats.st_blocks / (file_stats.st_blksize / 512)` divided by zero.
Closes https://github.com/facebook/rocksdb/pull/2420
Differential Revision: D5216110
Pulled By: al13n321
fbshipit-source-id: 6d8fc5e7c4f98c1139e68c7829ebdbac68b0fce0
Summary:
USE_CLANG=1 make -j32 analyze
The two errors would disappear after the assertion.
Closes https://github.com/facebook/rocksdb/pull/2416
Differential Revision: D5193526
Pulled By: maysamyabandeh
fbshipit-source-id: 16a21f18f68023f862764dd3ab9e00ca60b0eefa
Summary:
we align the buffer with logical sector size and should not test it with page size, which is usually 4k.
Closes https://github.com/facebook/rocksdb/pull/2245
Differential Revision: D5001842
Pulled By: lightmark
fbshipit-source-id: a7135fcf6351c6db363e8908956b1e193a4a6291
