mirror of https://github.com/facebook/rocksdb.git
224 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
anand76
|
35a0250293 |
Don't call InsertSaved on compressed only secondary cache (#11889)
Summary: In https://github.com/facebook/rocksdb/issues/11812, the ```CacheWithSecondaryAdapter::Insert``` calls ```InsertSaved``` on the secondary cache to warm it up with the compressed blocks. This should only be done if its a stacked cache with compressed and nvm cache. If its in-memory compressed only, then don't call ```InsertSaved```. Tests: Add a new unit test Pull Request resolved: https://github.com/facebook/rocksdb/pull/11889 Reviewed By: akankshamahajan15 Differential Revision: D49615758 Pulled By: anand1976 fbshipit-source-id: 156ff968ad014ac319f8840da7a48193e4cebfa9 |
|
|
anand76
|
48589b961f |
Fix updating the capacity of a tiered cache (#11873)
Summary: Updating the tiered cache (cache allocated using ```NewTieredCache()```) by calling ```SetCapacity()``` on it was not working properly. The initial creation would set the primary cache capacity to the combined primary and compressed secondary cache capacity. But ```SetCapacity()``` would just set the primary cache capacity, with no way to change the secondary cache capacity. Additionally, the API was confusing, since the primary and compressed secondary capacities would be specified separately during creation, but ```SetCapacity``` took the combined capacity. With this fix, the user always specifies the total budget and compressed secondary cache ratio on creation. Subsequently, `SetCapacity` will distribute the new capacity across the two caches by the same ratio. The `NewTieredCache` API has been changed to take the total cache capacity (inclusive of both the primary and the compressed secondary cache) and the ratio of total capacity to allocate to the compressed cache. These are specified in `TieredCacheOptions`. Any capacity specified in `LRUCacheOptions`, `HyperClockCacheOptions` and `CompressedSecondaryCacheOptions` is ignored. A new API, `UpdateTieredCache` is provided to dynamically update the total capacity, ratio of compressed cache, and admission policy. Tests: New unit tests Pull Request resolved: https://github.com/facebook/rocksdb/pull/11873 Reviewed By: akankshamahajan15 Differential Revision: D49562250 Pulled By: anand1976 fbshipit-source-id: 57033bc713b68d5da6292207765a6b3dbe539ddf |
|
|
Peter Dillinger
|
77a1d6eafb |
Fix assertion failure in AutoHCC (#11877)
Summary:
Example crash seen in crash test:
```
db_stress: cache/clock_cache.cc:237: bool rocksdb::clock_cache::{anonymous}::BeginSlotInsert(const rocksdb::clock_cache::ClockHandleBasicData&, rocksdb::clock_cache::ClockHandle&, uint64_t, bool*): Assertion `*already_matches == false' failed.
```
I was intentionally ignoring `already_matches` without resetting it to false for the next call.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11877
Test Plan:
Reproducer no longer reproduces:
```
while ./cache_bench -cache_type=auto_hyper_clock_cache -threads=32 -populate_cache=0 -histograms=0 -report_problems -insert_percent=87 -lookup_insert_percent=2 -skew=10 -ops_per_thread=100 -cache_size=1000000; do echo hi; done
```
Reviewed By: cbi42
Differential Revision: D49562065
Pulled By: pdillinger
fbshipit-source-id: 941062e6eac7a4b56157925b1cf2a0b15ff9cc9d
|
|
|
Peter Dillinger
|
f6cb763409 |
Fix major performance bug in AutoHCC growth phase (#11871)
Summary: ## The Problem Mark Callaghan found a performance bug in yet-unreleased AutoHCC (which should have been found in my own testing). The observed behavior is very slow insertion performance as the table is growing into a very large structure. The root cause is the precarious combination of linear hashing (indexing into the table while allowing growth) and linear probing (for finding an empty slot to insert into). Naively combined, this is a disaster because in linear hashing, part of the table is twice as dense as first probing location as the rest. Thus, even a modest load factor like 0.6 could cause the dense part of the table to degrade to linear search. The code had a correction for this imbalance, which works in steady-state operation, but failed to account for the concentrating effect of table growth. Specifically, newly-added slots were underpopulated which allowed old slots to become over-populated and degrade to linear search, even in single-threaded operation. Here's an example: ``` ./cache_bench -cache_type=auto_hyper_clock_cache -threads=1 -populate_cache=0 -value_bytes=500 -cache_size=3000000000 -histograms=0 -report_problems -ops_per_thread=20000000 -resident_ratio=0.6 ``` AutoHCC: Complete in 774.213 s; Rough parallel ops/sec = 25832 FixedHCC: Complete in 19.630 s; Rough parallel ops/sec = 1018840 LRUCache: Complete in 25.842 s; Rough parallel ops/sec = 773947 ## The Fix One small change is apparently sufficient to fix the problem, but I wanted to re-optimize the whole "finding a good empty slot" algorithm to improve safety margins for good performance and to improve typical case performance. The small change is to track the newly-added slot from Grow in Insert, when applicable, and use that slot for insertion if (a) the home slot is already occupied, and (b) the newly-added slot is empty. This appears to sufficiently load new slots while avoiding over-population of either old or new slots. See `likely_empty_slot`. However I've also made the logic much more resilient to parts of the table becoming over-populated. I tested a variant that used double hashing instead of linear probing and found that hurt steady-state average-case performance, presumably due to loss of locality in the chains. And even conventional double hashing might not be ideally robust against density skew in the table (still present because of home location bias), because double hashing might choose a small increment that could take a long time to iterate to the under-populated part of the table. The compromise that seems to bring the best of each approach is this: do linear probing (+1 at a time) within a small bound (chosen bound of 4 based on performance testing) and then fall back on a double-hashing variant if no slot has been found. The double-hashing variant uses a probing increment that is always close to the golden ratio, relative to the table size, so that any under-populated regions of the table can be found relatively quickly, without introducing any additional skew. And the increment is varied slightly to avoid clustering effects that could happen with a fixed increment (regardless of how big it is). And that leaves us with one remaining problem: the double hashing increment might not be relatively prime to the table size, so the probing sequence might be a cycle that does not cover the full set of slots. To solve this we can use a technique I developed many years ago (probably also developed by others) that simply adds one (in modular arithmetic) whenever we finish a (potentially incomplete) cycle. This is a simple and reasonably efficient way to iterate over all the slots without repetition, regardless of whether the increment is not relatively prime to the table size, or even zero. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11871 Test Plan: existing correctness tests, especially ClockCacheTest.ClockTableFull Intended follow-up: make ClockTableFull test more complete for AutoHCC ## Performance Ignoring old AutoHCC performance, as we established above it could be terrible. FixedHCC and LRUCache are unaffected by this change. All tests below include this change. ### Getting up to size, single thread (same cache_bench command as above, all three run at same time) AutoHCC: Complete in 26.724 s; Rough parallel ops/sec = 748400 FixedHCC: Complete in 19.987 s; Rough parallel ops/sec = 1000631 LRUCache: Complete in 28.291 s; Rough parallel ops/sec = 706939 Single-threaded faster than LRUCache (often / sometimes) is good. FixedHCC has an obvious advantage because it starts at full size. ### Multiple threads, steady state, high hit rate ~95% Using `-threads=10 -populate_cache=1 -ops_per_thread=10000000` and still `-resident_ratio=0.6` AutoHCC: Complete in 48.778 s; Rough parallel ops/sec = 2050119 FixedHCC: Complete in 46.569 s; Rough parallel ops/sec = 2147329 LRUCache: Complete in 50.537 s; Rough parallel ops/sec = 1978735 ### Multiple threads, steady state, low hit rate ~50% Change to `-resident_ratio=0.2` AutoHCC: Complete in 49.264 s; Rough parallel ops/sec = 2029884 FixedHCC: Complete in 49.750 s; Rough parallel ops/sec = 2010041 LRUCache: Complete in 53.002 s; Rough parallel ops/sec = 1886713 Don't expect AutoHCC to be consistently faster than FixedHCC, but they are at least similar in these benchmarks. Reviewed By: jowlyzhang Differential Revision: D49548534 Pulled By: pdillinger fbshipit-source-id: 263e4f4d71d0e9a7d91db3795b48fad75408822b |
|
|
anand76
|
269478ee46 |
Support compressed and local flash secondary cache stacking (#11812)
Summary: This PR implements support for a three tier cache - primary block cache, compressed secondary cache, and a nvm (local flash) secondary cache. This allows more effective utilization of the nvm cache, and minimizes the number of reads from local flash by caching compressed blocks in the compressed secondary cache. The basic design is as follows - 1. A new secondary cache implementation, ```TieredSecondaryCache```, is introduced. It keeps the compressed and nvm secondary caches and manages the movement of blocks between them and the primary block cache. To setup a three tier cache, we allocate a ```CacheWithSecondaryAdapter```, with a ```TieredSecondaryCache``` instance as the secondary cache. 2. The table reader passes both the uncompressed and compressed block to ```FullTypedCacheInterface::InsertFull```, allowing the block cache to optionally store the compressed block. 3. When there's a miss, the block object is constructed and inserted in the primary cache, and the compressed block is inserted into the nvm cache by calling ```InsertSaved```. This avoids the overhead of recompressing the block, as well as avoiding putting more memory pressure on the compressed secondary cache. 4. When there's a hit in the nvm cache, we attempt to insert the block in the compressed secondary cache and the primary cache, subject to the admission policy of those caches (i.e admit on second access). Blocks/items evicted from any tier are simply discarded. We can easily implement additional admission policies if desired. Todo (In a subsequent PR): 1. Add to db_bench and run benchmarks 2. Add to db_stress Pull Request resolved: https://github.com/facebook/rocksdb/pull/11812 Reviewed By: pdillinger Differential Revision: D49461842 Pulled By: anand1976 fbshipit-source-id: b40ac1330ef7cd8c12efa0a3ca75128e602e3a0b |
|
|
anand76
|
548aabfe5f |
Disable compressed secondary cache if capacity is 0 (#11863)
Summary: This PR makes disabling the compressed secondary cache by setting capacity to 0 a bit more efficient. Previously, inserts/lookups would go to the backing LRUCache before getting rejected due to 0 capacity. With this change, insert/lookup would return from ```CompressedSecondaryCache``` itself. Tests: Existing tests Pull Request resolved: https://github.com/facebook/rocksdb/pull/11863 Reviewed By: akankshamahajan15 Differential Revision: D49476248 Pulled By: anand1976 fbshipit-source-id: f0f17a5e3df7d8bfc06709f8f23c1302056ba590 |
|
|
Peter Dillinger
|
e67ee46642 |
Suppress TSAN reports on AutoHyperClockTable::Lookup (#11806)
Summary: This function uses racing reads for heuristic performance improvement. My change in https://github.com/facebook/rocksdb/issues/11792 only worked for clang, not gcc, and gcc does not accurately handle TSAN suppressions. I would have to mark much more code as suppressed than I want to. So I've taken a different approach: TSAN build does not use the racing reads but substitutes random results, as an extra test that a "correct" value is not needed for correct overall behavior. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11806 Test Plan: manual TSAN builds & tests with cache_bench Reviewed By: ajkr Differential Revision: D49100115 Pulled By: pdillinger fbshipit-source-id: d6d0dfb796d710b953212dd3fc171b6e88fadea1 |
|
|
Peter Dillinger
|
d01b1215bd |
Fix TSAN reports on AutoHCC (#11792)
Summary: Forgot to run TSAN test on latest revision of https://github.com/facebook/rocksdb/issues/11738 Pull Request resolved: https://github.com/facebook/rocksdb/pull/11792 Test Plan: Use cache_bench to reproduce TSAN errors and observe fix Reviewed By: ajkr Differential Revision: D48953196 Pulled By: pdillinger fbshipit-source-id: 9e358b4768d8ddde86f84b451863263f661d7b80 |
|
|
Peter Dillinger
|
fe3405e80f |
Automatic table sizing for HyperClockCache (AutoHCC) (#11738)
Summary: This change add an experimental next-generation HyperClockCache (HCC) with automatic sizing of the underlying hash table. Both the existing version (stable) and the new version (experimental for now) of HCC are available depending on whether an estimated average entry charge is provided in HyperClockCacheOptions. Internally, we call the two implementations AutoHyperClockCache (new) and FixedHyperClockCache (existing). The performance characteristics and much of the underlying logic are similar enough that AutoHCC is likely to make FixedHCC obsolete, and so it's best considered an evolution of the same technology or solution rather than an alternative. More specifically, both implementations share essentially the same logic for managing the state of individual entries in the cache, including metadata for reference counting and counting clocks for eviction. This metadata, which I like to call the "low-level HCC protocol," includes a read-write lock on entries, but relaxed consistency requirements on the cache (e.g. allowing rare duplication) means high-level cache operations never wait for these low-level per-entry locks. FixedHCC is fully wait-free. AutoHCC is different in how entries are indexed into an efficient hash table. AutoHCC is "essentially wait-free" as there is no pattern of typical high-level operations on a large cache that can lead to one thread waiting on another to complete some work, though it can happen in some unusual/unlucky cases, or atypical uses such as erasing specific cache keys. Table growth and entry reclamation is more complex in AutoHCC compared to FixedHCC, so uses some localized locking to manage that. AutoHCC uses linear hashing to grow the table as needed, with low latency and to a precise size. AutoHCC depends on anonymous mmap support from the OS (currently verified working on Linux, MacOS, and Windows) to allow the array underlying a hash table to grow in place without wasting resident memory on space reserved but unused. AutoHCC uses a form of chaining while FixedHCC uses open addressing and double hashing. More specifics: * In developing this PR, a rare availability bug (minor) was noticed in the existing HCC implementation of Release()+erase_if_last_ref, which is now inherited into AutoHCC. Fixing this without a performance regression will not be simple, so is left for follow-up work. * Some existing unit tests required adjustment of operational parameters or conditions to work with the new behaviors of AutoHCC. A number of bugs were found and fixed in the validation process, including getting unit tests in good working order. * Added an option to cache_bench, `-degenerate_hash_bits` for correctness stress testing described below. For this, the tool uses the reverse-engineered hash function for HCC to generate keys in which the specified number of hash bits, in critical positions, have a fixed value. Essentially each degenerate hash bit will half the number of chain heads utilized and double the average chain length. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11738 Test Plan: unit tests updated, and already added to db crash test. Also ## Correctness The code includes generous assertions to check for unexpected states, especially at destruction time, so should be able to detect critical concurrency bugs. Less serious "availability bugs" in which cache data is hidden or cleanly lost are more difficult to detect, but also less scary for data correctness (as long as performance is good and the design is sound). In average operation, the structure is extremely low stress and low contention (see next section) so stressing the corner case logic requires artificially stressing the operating conditions. First, we keep the structure small to increase the number of threads hitting the same chain or entry, and just one cache shard. Second, we artificially degrade the hashing so that chains are much longer than typical, using the new `-degenerate_hash_bits` option to cache_bench. Third, we re-create the structure from scratch frequently in order to exercise the Grow logic repeatedly and to get the benefit of the consistency checks in the structure's destructor in debug builds. For cache_bench this also means disabling the single-threaded "populate cache" step (normally used for steady state performance testing). And of course use many more threads than cores to have many preemptions. An effective test for working out bugs was this (using debug build of course): ``` while ./cache_bench -cache_type=auto_hyper_clock_cache -histograms=0 -cache_size=8000000 -threads=100 -populate_cache=0 -ops_per_thread=10000 -degenerate_hash_bits=6 -num_shard_bits=0; do :; done ``` Or even smaller cases. This setup has around 27 utilized chains, with around 35 entries each, and yield-waits more than 1 million times per second (very high contention; see next section). I have let this run for hours searching for any lingering issues. I've also run cache_bench under ASAN, UBSAN, and TSAN. ## Essentially wait free There is a counter for number of yield() calls when one thread is waiting on another. When we pre-populate the structure in a single thread, ``` ./cache_bench -cache_type=auto_hyper_clock_cache -histograms=0 -populate_cache=1 -ops_per_thread=200000 2>&1 | grep Yield ``` We see something on the order of 1 yield call per second across 16 threads, even when we load the system other other jobs (parallel compilation). With -populate_cache=0, there are more yield opportunities with parallel table growth. On an otherwise unloaded system, we still see very small (single digit) yield counts, with a chance of getting into the thousands, and getting into 10s of thousands per second during table growth phase if the system is loaded with other jobs. However, I am not worried about this if performance is still good (see next section). ## Overall performance Although cache_bench initially suggested performance very close to FixedHCC, there was a very noticeable performance hit under a db_bench setup like used in validating https://github.com/facebook/rocksdb/issues/10626. Much of the difference has been reduced by optimizing Lookup with a "naive" pass that will almost always find entries quickly, and only falling back to the careful Lookup algorithm when not found in the first pass. Setups (chosen to be sensitive to block cache performance), and compiled with USE_CLANG=1 JEMALLOC=1 PORTABLE=0 DEBUG_LEVEL=0: ``` TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16 ``` ### No regression on FixedHCC Running before & after builds at the same time on a 48 core machine. ``` TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -benchmarks=readrandom[-X10],block_cache_entry_stats,cache_report_problems -readonly -num=30000000 -bloom_bits=16 -cache_index_and_filter_blocks=1 -cache_size=610000000 -duration 20 -threads=24 -cache_type=fixed_hyper_clock_cache -seed=1234 ``` Before: readrandom [AVG 10 runs] : 847234 (± 8150) ops/sec; 59.2 (± 0.6) MB/sec 703MB max RSS After: readrandom [AVG 10 runs] : 851021 (± 7929) ops/sec; 59.5 (± 0.6) MB/sec 706MB max RSS Probably no material difference. ### Single-threaded performance Using `[-X2]` and `-threads=1` and `-duration=30`, running all three at the same time: lru_cache: 55100 ops/sec, then 55862 ops/sec (627MB max RSS) fixed_hyper_clock_cache: 60496 ops/sec, then 61231 ops/sec (626MB max RSS) auto_hyper_clock_cache: 47560 ops/sec, then 56081 ops/sec (626MB max RSS) So AutoHCC has more ramp-up cost in the first pass as the cache grows to the appropriate size. (In single-threaded operation, the parallelizability and per-op low latency of table growth is overall slower.) However, once up to size, its performance is comparable to LRUCache. FixedHCC's lean operations still win overall when a good estimate is available. If we look at HCC table stats, we can see that this configuration is not favorable to AutoHCC (and I have verified that other memory sizes do not yield substantially different results, until shards are under-sized for the full filters): FixedHCC: Slot occupancy stats: Overall 47% (124991/262144), Min/Max/Window = 28%/64%/500, MaxRun{Pos/Neg} = 17/22 AutoHCC: Slot occupancy stats: Overall 59% (125781/209682), Min/Max/Window = 43%/82%/500, MaxRun{Pos/Neg} = 76/16 Head occupancy stats: Overall 43% (92259/209682), Min/Max/Window = 24%/74%/500, MaxRun{Pos/Neg} = 19/26 Entries at home count: 53350 FixedHCC configuration is relatively good for speed, and not ideal for space utilization. As is typical, AutoHCC has tighter control on metadata usage (209682 x 64 bytes rather than 262144 x 64 bytes), and the higher load factor is slightly worse for speed. LRUCache also has more metadata usage, at 199680 x 96 bytes of tracked metadata (plus roughly another 10% of that untracked in the head pointers), and that metadata is subject to fragmentation. ### Parallel performance, high hit rate Now using `[-X10]` and `-threads=10`, all three at the same time lru_cache: [AVG 10 runs] : 263629 (± 1425) ops/sec; 18.4 (± 0.1) MB/sec 655MB max RSS, 97.1% cache hit rate fixed_hyper_clock_cache: [AVG 10 runs] : 479590 (± 8114) ops/sec; 33.5 (± 0.6) MB/sec 651MB max RSS, 97.1% cache hit rate auto_hyper_clock_cache: [AVG 10 runs] : 418687 (± 5915) ops/sec; 29.3 (± 0.4) MB/sec 657MB max RSS, 97.1% cache hit rate Even with just 10-way parallelism for each cache (though 30+/48 cores busy overall), LRUCache is already showing performance degradation, while AutoHCC is in the neighborhood of FixedHCC. And that brings us to the question of how AutoHCC holds up under extreme parallelism, so now independent runs with `-threads=100` (overloading 48 cores). lru_cache: 438613 ops/sec, 827MB max RSS fixed_hyper_clock_cache: 1651310 ops/sec, 812MB max RSS auto_hyper_clock_cache: 1505875 ops/sec, 821MB max RSS (Yield count: 1089 over 30s) Clearly, AutoHCC holds up extremely well under extreme parallelism, even closing some of the modest performance gap with FixedHCC. ### Parallel performance, low hit rate To get down to roughly 50% cache hit rate, we use `-cache_index_and_filter_blocks=0 -cache_size=1650000000` with `-threads=10`. Here the extra cost of running counting clock eviction, especially on the chains of AutoHCC, are evident, especially with the lower contention of cache_index_and_filter_blocks=0: lru_cache: 725231 ops/sec, 1770MB max RSS, 51.3% hit rate fixed_hyper_clock_cache: 638620 ops/sec, 1765MB max RSS, 50.2% hit rate auto_hyper_clock_cache: 541018 ops/sec, 1777MB max RSS, 50.8% hit rate Reviewed By: jowlyzhang Differential Revision: D48784755 Pulled By: pdillinger fbshipit-source-id: e79813dc087474ac427637dd282a14fa3011a6e4 |
|
|
Peter Dillinger
|
d3420464c3 |
cache_bench enhancements for jemalloc etc. (#11758)
Summary:
* Add some options to cache_bench to use JemallocNodumpAllocator
* Make num_shard_bits option use and report cache-specific defaults
* Add a usleep option to sleep between operations, for simulating a workload with more CPU idle/wait time.
* Use const& for JemallocAllocatorOptions, to improve API usability (e.g. can bind to temporary `{}`)
* InstallStackTraceHandler()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11758
Test Plan: manual
Reviewed By: jowlyzhang
Differential Revision: D48668479
Pulled By: pdillinger
fbshipit-source-id: b6032fbe09444cdb8f1443a5e017d2eea4f6205a
|
|
|
Changyu Bi
|
c2aad555c3 |
Add `CompressionOptions::checksum` for enabling ZSTD checksum (#11666)
Summary:
Optionally enable zstd checksum flag (
|
|
|
anand76
|
a1743e85be |
Implement a allow cache hits admission policy for the compressed secondary cache (#11713)
Summary: This PR implements a new admission policy for the compressed secondary cache, which includes the functionality of the existing policy, and also admits items evicted from the primary block cache with the hit bit set. Effectively, the new policy works as follows - 1. When an item is demoted from the primary cache without a hit, a placeholder is inserted in the compressed cache. A second demotion will insert the full entry. 2. When an item is promoted from the compressed cache to the primary cache for the first time, a placeholder is inserted in the primary. The second promotion inserts the full entry, while erasing it form the compressed cache. 3. If an item is demoted from the primary cache with the hit bit set, it is immediately inserted in the compressed secondary cache. The ```TieredVolatileCacheOptions``` has been updated with a new option, ```adm_policy```, which allows the policy to be selected. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11713 Reviewed By: pdillinger Differential Revision: D48444512 Pulled By: anand1976 fbshipit-source-id: b4cbf8c169a88097dff08e36e8bc4b3088de1492 |
|
|
Peter Dillinger
|
ef6f025563 |
Placeholder for AutoHyperClockCache, more (#11692)
Summary:
* The plan is for AutoHyperClockCache to be selected when HyperClockCacheOptions::estimated_entry_charge == 0, and in that case to use a new configuration option min_avg_entry_charge for determining an extreme case maximum size for the hash table. For the placeholder, a hack is in place in HyperClockCacheOptions::MakeSharedCache() to make the unit tests happy despite the new options not really making sense with the current implementation.
* Mostly updating and refactoring tests to test both the current HCC (internal name FixedHyperClockCache) and a placeholder for the new version (internal name AutoHyperClockCache).
* Simplify some existing tests not to depend directly on cache type.
* Type-parameterize the shard-level unit tests, which unfortunately requires more syntax like `this->` in places for disambiguation.
* Added means of choosing auto_hyper_clock_cache to cache_bench, db_bench, and db_stress, including add to crash test.
* Add another templated class BaseHyperClockCache to reduce future copy-paste
* Added ReportProblems support to cache_bench
* Added a DEBUG-level diagnostic to ReportProblems for the variance in load factor throughout the table, which will become more of a concern with linear hashing to be used in the Auto implementation. Example with current Fixed HCC:
```
2023/08/10-13:41:41.602450 6ac36 [DEBUG] [che/clock_cache.cc:1507] Slot occupancy stats: Overall 49% (129008/262144), Min/Max/Window = 39%/60%/500, MaxRun{Pos/Neg} = 18/17
```
In other words, with overall occupancy of 49%, the lowest across any 500 contiguous cells is 39% and highest 60%. Longest run of occupied is 18 and longest run of unoccupied is 17. This seems consistent with random samples from a uniform distribution.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11692
Test Plan: Shouldn't be any meaningful changes yet to production code or to what is tested, but there is temporary redundancy in testing until the new implementation is plugged in.
Reviewed By: jowlyzhang
Differential Revision: D48247413
Pulled By: pdillinger
fbshipit-source-id: 11541f996d97af403c2e43c92fb67ff22dd0b5da
|
|
|
Peter Dillinger
|
99daea3481 |
Prepare tests for new HCC naming (#11676)
Summary: I'm anticipating using the public name HyperClockCache for both the current version with a fixed-size table and the upcoming version with an automatically growing table. However, for simplicity of testing them as substantially distinct implementations, I want to give them distinct internal names, like FixedHyperClockCache and AutoHyperClockCache. This change anticipates that by renaming to FixedHyperClockCache and assuming for now that all the unit tests run on HCC will run and behave similarly for the automatic HCC. Obviously updates will need to be made, but I'm trying to avoid uninteresting find & replace updates in what will be a large and engineering-heavy PR for AutoHCC Pull Request resolved: https://github.com/facebook/rocksdb/pull/11676 Test Plan: no behavior change intended, except logging will now use the name FixedHyperClockCache Reviewed By: ajkr Differential Revision: D48103165 Pulled By: pdillinger fbshipit-source-id: a33f1901488fea102164c2318e2f2b156aaba736 |
|
|
Peter Dillinger
|
cdb11f5ce6 |
More minor HCC refactoring + typed mmap (#11670)
Summary: More code leading up to dynamic HCC. * Small enhancements to cache_bench * Extra assertion in Unref * Improve a CAS loop in ChargeUsageMaybeEvictStrict * Put load factor constants in appropriate class * Move `standalone` field to HyperClockTable::HandleImpl because it can be encoded differently in the upcoming dynamic HCC. * Add a typed version of MemMapping to simplify some future code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11670 Test Plan: existing tests, unit test added for TypedMemMapping Reviewed By: jowlyzhang Differential Revision: D48056464 Pulled By: pdillinger fbshipit-source-id: 186b7d3105c5d6d2eb6a592369bc10a97ee14a15 |
|
|
Peter Dillinger
|
f9de217353 |
Some cache_bench enhancements (#11661)
Summary: ... used in validating some HyperClockCache development in progress. * Revamp the "populate cache" step to avoid redundant insertions (very rare in practice) and more consistently approach the desired resident_ratio while maintaining appropriate skew (still not perfect). * Track and print hit ratio on lookups, to ensure a fair comparison is happening between implementations etc. * Add an option to disable tracking and printing histograms (lots of output) * Add an option to specify a random seed (for more reproducibility) * Remove confusing/redundant "-skewed" option Uses BitwiseAnd from https://github.com/facebook/rocksdb/issues/11660 (tested there) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11661 Test Plan: manual Reviewed By: akankshamahajan15, jowlyzhang Differential Revision: D47937671 Pulled By: pdillinger fbshipit-source-id: 85a2bb881b1bca4f63e015bac684105fd91c9f35 |
|
|
Peter Dillinger
|
f4e4039f00 |
Add some more bit operations to internal APIs (#11660)
Summary: BottomNBits() - there is a single fast instruction for this on x86 since BMI2, but testing with godbolt indicates you need at least GCC 10 for the compiler to choose that instruction from the obvious C++ code. https://godbolt.org/z/5a7Ysd41h BitwiseAnd() - this is a convenience function that works around the language flaw that the type of the result of x & y is the larger of the two input types, when it should be the smaller. This can save some ugly static_cast. I expect to use both of these in coming HyperClockCache developments, and have applied them in a couple of places in existing code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11660 Test Plan: unit tests added Reviewed By: jowlyzhang Differential Revision: D47935531 Pulled By: pdillinger fbshipit-source-id: d148c43a1e51df4a1c549b93aaf2725a3f8d3bd6 |
|
|
Peter Dillinger
|
c41122b1a0 |
Even more HyperClockCache refactoring (#11630)
Summary: ... ahead of dynamic variant. * Introduce an Unref function for a common pattern. Cases that were previously using std::memory_order_acq_rel we doing so because we were saving the pre-updated value in case it might be used. Now we are explicitly throwing away the pre-updated value so do not need the acquire semantic, just release. * Introduce a reusable EvictionData struct and TrackAndReleaseEvictedEntry() function. * Based on a linter suggesting, use const Func& parameter type instead of Func for templated callable parameters. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11630 Test Plan: existing tests, and performance test with release build of cache_bench. Getting 1-2% difference between before & after from run to run, but inconsistent about which one is faster. Reviewed By: jowlyzhang Differential Revision: D47657334 Pulled By: pdillinger fbshipit-source-id: 5cf2377c0d47a39143b04be6735f98c550e8bdc3 |
|
|
Andrew Kryczka
|
05c3b8ecac |
Prepare for specialized interface for row cache (#11620)
Summary: An internal user wants to implement a key-aware row cache policy. For that, they need to know the components of the cache key, especially the user key component. With a specialized `RowCache` interface, we will be able to tell them the components so they won't have to make assumptions about our internal key schema. This PR prepares for the specialized `RowCache` interface by updating the migration plan of https://github.com/facebook/rocksdb/issues/11450. I added a release note for the removed APIs and didn't mention the added ones for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11620 Reviewed By: pdillinger Differential Revision: D47536962 Pulled By: ajkr fbshipit-source-id: bbee0fc4ad67fc699a66b8f2b4ea4544dd003691 |
|
|
Peter Dillinger
|
846db9d7b1 |
Refactor ClockCache ApplyToEntries (#11609)
Summary: ... ahead of planned dynamic HCC variant. This changes simplifies some logic while still enabling future code sharing between implementation variants. Detail: For complicated reasons, using a std::function parameter to `ConstApplyToEntriesRange` with a lambda argument does not play nice with templated HandleImpl. An explicit conversion to std::function would be needed for it to compile. Templating the function type is the easy work-around. Also made some functions from https://github.com/facebook/rocksdb/issues/11572 private as recommended Pull Request resolved: https://github.com/facebook/rocksdb/pull/11609 Test Plan: existing tests Reviewed By: jowlyzhang Differential Revision: D47407415 Pulled By: pdillinger fbshipit-source-id: 0f65954db16335999b78fb7d2563ec627624cef0 |
|
|
Peter Dillinger
|
b1b6f87fbe |
Some small improvements to HyperClockCache (#11601)
Summary: Stacked on https://github.com/facebook/rocksdb/issues/11572 * Minimize use of std::function and lambdas to minimize chances of compiler heap-allocating closures (unnecessary stress on allocator). It appears that converting FindSlot to a template enables inlining the lambda parameters, avoiding heap allocations. * Clean up some logic with FindSlot (FIXMEs from https://github.com/facebook/rocksdb/issues/11572) * Fix handling of rare case of probing all slots, with new unit test. (Previously Insert would not roll back displacements in that case, which would kill performance if it were to happen.) * Add an -early_exit option to cache_bench for gathering memory stats before deallocation. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11601 Test Plan: unit test added for probing all slots ## Seeing heap allocations Run `MALLOC_CONF="stats_print:true" ./cache_bench -cache_type=hyper_clock_cache` before https://github.com/facebook/rocksdb/issues/11572 vs. after this change. Before, we see this in the interesting bin statistics: ``` size nrequests ---- --------- 32 578460 64 24340 8192 578460 ``` And after: ``` size nrequests ---- --------- 32 (insignificant) 64 24370 8192 579130 ``` ## Performance test Build with `make USE_CLANG=1 PORTABLE=0 DEBUG_LEVEL=0 -j32 cache_bench` Run `./cache_bench -cache_type=hyper_clock_cache -ops_per_thread=5000000` in before and after configurations, simultaneously: ``` Before: Complete in 33.244 s; Rough parallel ops/sec = 2406442 After: Complete in 32.773 s; Rough parallel ops/sec = 2441019 ``` Reviewed By: jowlyzhang Differential Revision: D47375092 Pulled By: pdillinger fbshipit-source-id: 46f0f57257ddb374290a0a38c651764ea60ba410 |
|
|
Peter Dillinger
|
c3c84b3397 |
Refactor (Hyper)ClockCache code for upcoming changes (#11572)
Summary: Separate out some functionality that will be common to both static and dynamic HCC into BaseClockTable. Table::InsertState and GrowIfNeeded will be used by the dynamic HCC so don't make much sense right now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11572 Test Plan: existing tests. No functional changes intended. Performance test in subsequent PR https://github.com/facebook/rocksdb/issues/11601 Reviewed By: jowlyzhang Differential Revision: D47110496 Pulled By: pdillinger fbshipit-source-id: 379bd433322a42ea28c0043b41ec24956d21e7aa |
|
|
JUBIN CHHEDA
|
b14c0b0602 |
Update secondary_cache_adapter.cc (#11566)
Summary: Infer detected a(n) [Unnecessary Copy Intermediate](https://fbinfer.com/docs/next/all-issue-types#unnecessary copy intermediate) issue. variable &my_secondary_handles is copied unnecessarily into an intermediate on line 268. To avoid the copy, try moving it by calling std::move instead or alternatively change the callee's parameter type to const &. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11566 Reviewed By: akankshamahajan15 Differential Revision: D47057361 Pulled By: ajkr fbshipit-source-id: bc5d7a71638aecbf976f1a163128b489c9e87fd8 |
|
|
anand76
|
fcc358baf2 |
Integrate CacheReservationManager with compressed secondary cache (#11449)
Summary: This draft PR implements charging of reserved memory, for write buffers, table readers, and other purposes, proportionally to the block cache and the compressed secondary cache. The basic flow of memory reservation is maintained - clients use ```CacheReservationManager``` to request reservations, and ```CacheReservationManager``` inserts placeholder entries, i.e null value and non-zero charge, into the block cache. The ```CacheWithSecondaryAdapter``` wrapper uses its own instance of ```CacheReservationManager``` to keep track of reservations charged to the secondary cache, while the placeholder entries are inserted into the primary block cache. The design is as follows. When ```CacheWithSecondaryAdapter``` is constructed with the ```distribute_cache_res``` parameter set to true, it manages the entire memory budget across the primary and secondary cache. The secondary cache is assumed to be in memory, such as the ```CompressedSecondaryCache```. When a placeholder entry is inserted by a CacheReservationManager instance to reserve memory, the ```CacheWithSecondaryAdapter```ensures that the reservation is distributed proportionally across the primary/secondary caches. The primary block cache is initially sized to the sum of the primary cache budget + the secondary cache budget, as follows - |--------- Primary Cache Configured Capacity -----------| |---Secondary Cache Budget----|----Primary Cache Budget-----| A ```ConcurrentCacheReservationManager``` member in the ```CacheWithSecondaryAdapter```, ```pri_cache_res_```, is used to help with tracking the distribution of memory reservations. Initially, it accounts for the entire secondary cache budget as a reservation against the primary cache. This shrinks the usable capacity of the primary cache to the budget that the user originally desired. |--Reservation for Sec Cache--|-Pri Cache Usable Capacity---| When a reservation placeholder is inserted into the adapter, it is inserted directly into the primary cache. This means the entire charge of the placeholder is counted against the primary cache. To compensate and count a portion of it against the secondary cache, the secondary cache ```Deflate()``` method is called to shrink it. Since the ```Deflate()``` causes the secondary actual usage to shrink, it is reflected here by releasing an equal amount from the ```pri_cache_res_``` reservation. For example, if the pri/sec ratio is 50/50, this would be the state after placeholder insertion - |-Reservation for Sec Cache-|-Pri Cache Usable Capacity-|-R-| Likewise, when the user inserted placeholder is released, the secondary cache ```Inflate()``` method is called to grow it, and the ```pri_cache_res_``` reservation is increased by an equal amount. Other alternatives - 1. Another way of implementing this would have been to simply split the user reservation in ```CacheWithSecondaryAdapter``` into primary and secondary components. However, this would require allocating a structure to track the associated secondary cache reservation, which adds some complexity and overhead. 2. Yet another option is to implement the splitting directly in ```CacheReservationManager```. However, there are multiple instances of ```CacheReservationManager``` in a DB instance, making it complicated to keep track of them. The PR contains the following changes - 1. A new cache allocator, ```NewTieredVolatileCache()```, is defined for allocating a tiered primary block cache and compressed secondary cache. This internally allocates an instance of ```CacheWithSecondaryAdapter```. 3. New interfaces, ```Deflate()``` and ```Inflate()```, are added to the ```SecondaryCache``` interface. The default implementaion returns ```NotSupported``` with overrides in ```CompressedSecondaryCache```. 4. The ```CompressedSecondaryCache``` uses a ```ConcurrentCacheReservationManager``` instance to manage reservations done using ```Inflate()/Deflate()```. 5. The ```CacheWithSecondaryAdapter``` optionally distributes memory reservations across the primary and secondary caches. The primary cache is sized to the total memory budget (primary + secondary), and the capacity allocated to secondary cache is "reserved" against the primary cache. For any subsequent reservations, the primary cache pre-reserved capacity is adjusted. Benchmarks - Baseline ``` time ~/rocksdb_anand76/db_bench --db=/dev/shm/comp_cache_res/base --use_existing_db=true --benchmarks="readseq,readwhilewriting" --key_size=32 --value_size=1024 --num=20000000 --threads=32 --bloom_bits=10 --cache_size=30000000000 --use_compressed_secondary_cache=true --compressed_secondary_cache_size=5000000000 --duration=300 --cost_write_buffer_to_cache=true ``` ``` readseq : 3.301 micros/op 9694317 ops/sec 66.018 seconds 640000000 operations; 9763.0 MB/s readwhilewriting : 22.921 micros/op 1396058 ops/sec 300.021 seconds 418846968 operations; 1405.9 MB/s (13068999 of 13068999 found) real 6m31.052s user 152m5.660s sys 26m18.738s ``` With TieredVolatileCache ``` time ~/rocksdb_anand76/db_bench --db=/dev/shm/comp_cache_res/base --use_existing_db=true --benchmarks="readseq,readwhilewriting" --key_size=32 --value_size=1024 --num=20000000 --threads=32 --bloom_bits=10 --cache_size=30000000000 --use_compressed_secondary_cache=true --compressed_secondary_cache_size=5000000000 --duration=300 --cost_write_buffer_to_cache=true --use_tiered_volatile_cache=true ``` ``` readseq : 4.064 micros/op 7873915 ops/sec 81.281 seconds 640000000 operations; 7929.7 MB/s readwhilewriting : 20.944 micros/op 1527827 ops/sec 300.020 seconds 458378968 operations; 1538.6 MB/s (14296999 of 14296999 found) real 6m42.743s user 157m58.972s sys 33m16.671 ``` ``` readseq : 3.484 micros/op 9184967 ops/sec 69.679 seconds 640000000 operations; 9250.0 MB/s readwhilewriting : 21.261 micros/op 1505035 ops/sec 300.024 seconds 451545968 operations; 1515.7 MB/s (14101999 of 14101999 found) real 6m31.469s user 155m16.570s sys 27m47.834s ``` ToDo - 1. Add to db_stress Pull Request resolved: https://github.com/facebook/rocksdb/pull/11449 Reviewed By: pdillinger Differential Revision: D46197388 Pulled By: anand1976 fbshipit-source-id: 42d16f0254df683db4929db20d06ff26030e90df |
|
|
Peter Dillinger
|
4067acabca |
Compatibility step for separating BlockCache and GeneralCache APIs (#11450)
Summary: Add two type aliases for Cache: BlockCache and GeneralCache, and add LRUCacheOptions::MakeSharedGeneralCache(). This will ease upgrade to an intended future change to separate the cache API between block cache and other (general) uses, including row cache. Separating the APIs will make it easier to expose more details of block caching for customization. For example, it would be nice to pass the file unique ID and offset as the logical cache key instead of using a Slice, which could facilitate some file-specific customizations in block cache. This would also make it clear that HyperClockCache is not usable as a general cache, because it can only deal with fixed-size block cache keys. block_cache, row_cache, and blob_cache are the uses of Cache in the public API. blob_cache should be able to use BlockCache while row_cache is a GeneralCache user, as its keys are of arbitrary size. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11450 Test Plan: see updated unit test. Reviewed By: anand1976 Differential Revision: D45882067 Pulled By: pdillinger fbshipit-source-id: ff5d9f0b644f87ae337a29a7728ce3ed07b2a4b2 |
|
|
Peter Dillinger
|
206fdea3d9 |
Change internal headers with duplicate names (#11408)
Summary: In IDE navigation I find it annoying that there are two statistics.h files (etc.) and often land on the wrong one. Here I migrate several headers to use the blah.h <- blah_impl.h <- blah.cc idiom. Although clang-format wants "blah.h" to be the top include for "blah.cc", I think overall this is an improvement. No public API changes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11408 Test Plan: existing tests Reviewed By: ltamasi Differential Revision: D45456696 Pulled By: pdillinger fbshipit-source-id: 809d931253f3272c908cf5facf7e1d32fc507373 |
|
|
Peter Dillinger
|
f4a02f2c52 |
Add hash_seed to Caches (#11391)
Summary: See motivation and description in new ShardedCacheOptions::hash_seed option. Updated db_bench so that its seed param is used for the cache hash seed. Made its code more safe to ensure seed is set before use. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11391 Test Plan: unit tests added / updated **Performance** - no discernible difference seen running cache_bench repeatedly before & after. With lru_cache and hyper_clock_cache. Reviewed By: hx235 Differential Revision: D45557797 Pulled By: pdillinger fbshipit-source-id: 40bf4da6d66f9d41a8a0eb8e5cf4246a4aa07934 |
|
|
Peter Dillinger
|
41a7fbf758 |
Avoid long parameter lists configuring Caches (#11386)
Summary: For better clarity, encouraging more options explicitly specified using fields rather than positionally via constructor parameter lists. Simplifies code maintenance as new fields are added. Deprecate some cases of the confusing pattern of NewWhatever() functions returning shared_ptr. Net reduction of about 70 source code lines (including comments). Pull Request resolved: https://github.com/facebook/rocksdb/pull/11386 Test Plan: existing tests Reviewed By: ajkr Differential Revision: D45059075 Pulled By: pdillinger fbshipit-source-id: d53fa09b268024f9c55254bb973b6c69feebf41a |
|
|
Zdenek Korcak
|
c8552d8c63 |
fix bad implementation of ShardedCache::GetOccupancyCount (#11325)
Summary: copy paste typo Pull Request resolved: https://github.com/facebook/rocksdb/pull/11325 Reviewed By: hx235 Differential Revision: D44378512 Pulled By: ajkr fbshipit-source-id: 509ed2697c06eed975914359ece0459a0ea40312 |
|
|
Peter Dillinger
|
03ccb1cd42 |
Re-clarify SecondaryCache API (#11316)
Summary: I previously misread or misinterpreted API contracts for SecondaryCache and this should correct the record. (Follow-up item from https://github.com/facebook/rocksdb/issues/11301) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11316 Test Plan: comments only Reviewed By: anand1976 Differential Revision: D44245107 Pulled By: pdillinger fbshipit-source-id: 3f8ddec150674b75728f1730f99b963bbf7b76e7 |
|
|
Peter Dillinger
|
204fcff751 |
HyperClockCache support for SecondaryCache, with refactoring (#11301)
Summary:
Internally refactors SecondaryCache integration out of LRUCache specifically and into a wrapper/adapter class that works with various Cache implementations. Notably, this relies on separating the notion of async lookup handles from other cache handles, so that HyperClockCache doesn't have to deal with the problem of allocating handles from the hash table for lookups that might fail anyway, and might be on the same key without support for coalescing. (LRUCache's hash table can incorporate previously allocated handles thanks to its pointer indirection.) Specifically, I'm worried about the case in which hundreds of threads try to access the same block and probing in the hash table degrades to linear search on the pile of entries with the same key.
This change is a big step in the direction of supporting stacked SecondaryCaches, but there are obstacles to completing that. Especially, there is no SecondaryCache hook for evictions to pass from one to the next. It has been proposed that evictions be transmitted simply as the persisted data (as in SaveToCallback), but given the current structure provided by the CacheItemHelpers, that would require an extra copy of the block data, because there's intentionally no way to ask for a contiguous Slice of the data (to allow for flexibility in storage). `AsyncLookupHandle` and the re-worked `WaitAll()` should be essentially prepared for stacked SecondaryCaches, but several "TODO with stacked secondaries" issues remain in various places.
It could be argued that the stacking instead be done as a SecondaryCache adapter that wraps two (or more) SecondaryCaches, but at least with the current API that would require an extra heap allocation on SecondaryCache Lookup for a wrapper SecondaryCacheResultHandle that can transfer a Lookup between secondaries. We could also consider trying to unify the Cache and SecondaryCache APIs, though that might be difficult if `AsyncLookupHandle` is kept a fixed struct.
## cache.h (public API)
Moves `secondary_cache` option from LRUCacheOptions to ShardedCacheOptions so that it is applicable to HyperClockCache.
## advanced_cache.h (advanced public API)
* Add `Cache::CreateStandalone()` so that the SecondaryCache support wrapper can use it.
* Add `SetEvictionCallback()` / `eviction_callback_` so that the SecondaryCache support wrapper can use it. Only a single callback is supported for efficiency. If there is ever a need for more than one, hopefully that can be handled with a broadcast callback wrapper.
These are essentially the two "extra" pieces of `Cache` for pulling out specific SecondaryCache support from the `Cache` implementation. I think it's a good trade-off as these are reasonable, limited, and reusable "cut points" into the `Cache` implementations.
* Remove async capability from standard `Lookup()` (getting rid of awkward restrictions on pending Handles) and add `AsyncLookupHandle` and `StartAsyncLookup()`. As noted in the comments, the full struct of `AsyncLookupHandle` is exposed so that it can be stack allocated, for efficiency, though more data is being copied around than before, which could impact performance. (Lookup info -> AsyncLookupHandle -> Handle vs. Lookup info -> Handle)
I could foresee a future in which a Cache internally saves a pointer to the AsyncLookupHandle, which means it's dangerous to allow it to be copyable or even movable. It also means it's not compatible with std::vector (which I don't like requiring as an API parameter anyway), so `WaitAll()` expects any contiguous array of AsyncLookupHandles. I believe this is best for common case efficiency, while behaving well in other cases also. For example, `WaitAll()` has no effect on default-constructed AsyncLookupHandles, which look like a completed cache miss.
## cacheable_entry.h
A couple of functions are obsolete because Cache::Handle can no longer be pending.
## cache.cc
Provides default implementations for new or revamped Cache functions, especially appropriate for non-blocking caches.
## secondary_cache_adapter.{h,cc}
The full details of the Cache wrapper adding SecondaryCache support. Essentially replicates the SecondaryCache handling that was in LRUCache, but obviously refactored. There is a bit of logic duplication, where Lookup() is essentially a manually optimized version of StartAsyncLookup() and Wait(), but it's roughly a dozen lines of code.
## sharded_cache.h, typed_cache.h, charged_cache.{h,cc}, sim_cache.cc
Simply updated for Cache API changes.
## lru_cache.{h,cc}
Carefully remove SecondaryCache logic, implement `CreateStandalone` and eviction handler functionality.
## clock_cache.{h,cc}
Expose existing `CreateStandalone` functionality, add eviction handler functionality. Light refactoring.
## block_based_table_reader*
Mostly re-worked the only usage of async Lookup, which is in BlockBasedTable::MultiGet. Used arrays in place of autovector in some places for efficiency. Simplified some logic by not trying to process some cache results before they're all ready.
Created new function `BlockBasedTable::GetCachePriority()` to reduce some pre-existing code duplication (and avoid making it worse).
Fixed at least one small bug from the prior confusing mixture of async and sync Lookups. In MaybeReadBlockAndLoadToCache(), called by RetrieveBlock(), called by MultiGet() with wait=false, is_cache_hit for the block_cache_tracer entry would not be set to true if the handle was pending after Lookup and before Wait.
## Intended follow-up work
* Figure out if there are any missing stats or block_cache_tracer work in refactored BlockBasedTable::MultiGet
* Stacked secondary caches (see above discussion)
* See if we can make up for the small MultiGet performance regression.
* Study more performance with SecondaryCache
* Items evicted from over-full LRUCache in Release were not being demoted to SecondaryCache, and still aren't to minimize unit test churn. Ideally they would be demoted, but it's an exceptional case so not a big deal.
* Use CreateStandalone for cache reservations (save unnecessary hash table operations). Not a big deal, but worthy cleanup.
* Somehow I got the contract for SecondaryCache::Insert wrong in #10945. (Doesn't take ownership!) That API comment needs to be fixed, but didn't want to mingle that in here.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11301
Test Plan:
## Unit tests
Generally updated to include HCC in SecondaryCache tests, though HyperClockCache has some different, less strict behaviors that leads to some tests not really being set up to work with it. Some of the tests remain disabled with it, but I think we have good coverage without them.
## Crash/stress test
Updated to use the new combination.
## Performance
First, let's check for regression on caches without secondary cache configured. Adding support for the eviction callback is likely to have a tiny effect, but it shouldn't be worrisome. LRUCache could benefit slightly from less logic around SecondaryCache handling. We can test with cache_bench default settings, built with DEBUG_LEVEL=0 and PORTABLE=0.
```
(while :; do base/cache_bench --cache_type=hyper_clock_cache | grep Rough; done) | awk '{ sum += $9; count++; print $0; print "Average: " int(sum / count) }'
```
**Before** this and #11299 (which could also have a small effect), running for about an hour, before & after running concurrently for each cache type:
HyperClockCache: 3168662 (average parallel ops/sec)
LRUCache: 2940127
**After** this and #11299, running for about an hour:
HyperClockCache: 3164862 (average parallel ops/sec) (0.12% slower)
LRUCache: 2940928 (0.03% faster)
This is an acceptable difference IMHO.
Next, let's consider essentially the worst case of new CPU overhead affecting overall performance. MultiGet uses the async lookup interface regardless of whether SecondaryCache or folly are used. We can configure a benchmark where all block cache queries are for data blocks, and all are hits.
Create DB and test (before and after tests running simultaneously):
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16
TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=multireadrandom[-X30] -readonly -multiread_batched -batch_size=32 -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16
```
**Before**:
multireadrandom [AVG 30 runs] : 3444202 (± 57049) ops/sec; 240.9 (± 4.0) MB/sec
multireadrandom [MEDIAN 30 runs] : 3514443 ops/sec; 245.8 MB/sec
**After**:
multireadrandom [AVG 30 runs] : 3291022 (± 58851) ops/sec; 230.2 (± 4.1) MB/sec
multireadrandom [MEDIAN 30 runs] : 3366179 ops/sec; 235.4 MB/sec
So that's roughly a 3% regression, on kind of a *worst case* test of MultiGet CPU. Similar story with HyperClockCache:
**Before**:
multireadrandom [AVG 30 runs] : 3933777 (± 41840) ops/sec; 275.1 (± 2.9) MB/sec
multireadrandom [MEDIAN 30 runs] : 3970667 ops/sec; 277.7 MB/sec
**After**:
multireadrandom [AVG 30 runs] : 3755338 (± 30391) ops/sec; 262.6 (± 2.1) MB/sec
multireadrandom [MEDIAN 30 runs] : 3785696 ops/sec; 264.8 MB/sec
Roughly a 4-5% regression. Not ideal, but not the whole story, fortunately.
Let's also look at Get() in db_bench:
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X30] -readonly -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16
```
**Before**:
readrandom [AVG 30 runs] : 2198685 (± 13412) ops/sec; 153.8 (± 0.9) MB/sec
readrandom [MEDIAN 30 runs] : 2209498 ops/sec; 154.5 MB/sec
**After**:
readrandom [AVG 30 runs] : 2292814 (± 43508) ops/sec; 160.3 (± 3.0) MB/sec
readrandom [MEDIAN 30 runs] : 2365181 ops/sec; 165.4 MB/sec
That's showing roughly a 4% improvement, perhaps because of the secondary cache code that is no longer part of LRUCache. But weirdly, HyperClockCache is also showing 2-3% improvement:
**Before**:
readrandom [AVG 30 runs] : 2272333 (± 9992) ops/sec; 158.9 (± 0.7) MB/sec
readrandom [MEDIAN 30 runs] : 2273239 ops/sec; 159.0 MB/sec
**After**:
readrandom [AVG 30 runs] : 2332407 (± 11252) ops/sec; 163.1 (± 0.8) MB/sec
readrandom [MEDIAN 30 runs] : 2335329 ops/sec; 163.3 MB/sec
Reviewed By: ltamasi
Differential Revision: D44177044
Pulled By: pdillinger
fbshipit-source-id: e808e48ff3fe2f792a79841ba617be98e48689f5
|
|
|
Peter Dillinger
|
ccaa3225b0 |
Simplify tracking entries already in SecondaryCache (#11299)
Summary: In preparation for factoring secondary cache support out of individual Cache implementations, we can get rid of the "in secondary cache" flag on entries through a workable hack: when an entry is promoted from secondary, it is inserted in primary using a helper that lacks secondary cache support, thus preventing re-insertion into secondary cache through existing logic. This adds to the complexity of building CacheItemHelpers, because you always have to be able to get to an equivalent helper without secondary cache support, but that complexity is reasonably isolated within RocksDB typed_cache.h and test code. gcc-7 seems to have problems with constexpr constructor referencing `this` so removed constexpr support on CacheItemHelper. Also refactored some related test code to share common code / functionality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11299 Test Plan: existing tests Reviewed By: anand1976 Differential Revision: D44101453 Pulled By: pdillinger fbshipit-source-id: 7a59d0a3938ee40159c90c3e65d7004f6a272345 |
|
|
Peter Dillinger
|
601efe3cf2 |
Misc cleanup of block cache code (#11291)
Summary: ... ahead of a larger change. * Rename confusingly named `is_in_sec_cache` to `kept_in_sec_cache` * Unify naming of "standalone" block cache entries (was "detached" in clock_cache) * Remove some unused definitions in clock_cache.h (leftover from a previous revision) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11291 Test Plan: usual tests and CI, no behavior changes Reviewed By: anand1976 Differential Revision: D43984642 Pulled By: pdillinger fbshipit-source-id: b8bf0c5b90a932a88bcbdb413b2f256834aedf97 |
|
|
Peter Dillinger
|
2a23bee963 |
Use CacheWrapper in more places (#11295)
Summary: ... to simplify code and make it less prone to needless updates on refactoring. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11295 Test Plan: existing tests (no functional changes intended) Reviewed By: hx235 Differential Revision: D44040260 Pulled By: pdillinger fbshipit-source-id: 1b6badb5c8ca673db0903bfaba3cfbc986f386be |
|
|
Jaepil Jeong
|
969d4e1dd2 |
Fix compile errors in Clang due to unused variables depending on the build configuration (#11234)
Summary:
This PR fixes compilation errors in Clang due to unused variables like the below:
```
[109/329] Building CXX object CMakeFiles/rocksdb.dir/db/version_edit_handler.cc.o
FAILED: CMakeFiles/rocksdb.dir/db/version_edit_handler.cc.o
ccache /opt/homebrew/opt/llvm/bin/clang++ -DGFLAGS=1 -DGFLAGS_IS_A_DLL=0 -DHAVE_FULLFSYNC -DJEMALLOC_NO_DEMANGLE -DLZ4 -DOS_MACOSX -DROCKSDB_JEMALLOC -DROCKSDB_LIB_IO_POSIX -DROCKSDB_NO_DYNAMIC_EXTENSION -DROCKSDB_PLATFORM_POSIX -DSNAPPY -DTBB -DZLIB -DZSTD -I/Users/jaepil/work/deepsearch/deps/cpp/rocksdb -I/Users/jaepil/work/deepsearch/deps/cpp/rocksdb/include -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk -I/Users/jaepil/app/include -I/opt/homebrew/include -I/opt/homebrew/opt/llvm/include -I/opt/homebrew/opt/llvm/include/c++/v1 -W -Wextra -Wall -pthread -Wsign-compare -Wshadow -Wno-unused-parameter -Wno-unused-variable -Woverloaded-virtual -Wnon-virtual-dtor -Wno-missing-field-initializers -Wno-strict-aliasing -Wno-invalid-offsetof -fno-omit-frame-pointer -momit-leaf-frame-pointer -march=armv8-a+crc+crypto -Wno-unused-function -Werror -O2 -g -DNDEBUG -arch arm64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX13.1.sdk -std=gnu++20 -MD -MT CMakeFiles/rocksdb.dir/db/version_edit_handler.cc.o -MF CMakeFiles/rocksdb.dir/db/version_edit_handler.cc.o.d -o CMakeFiles/rocksdb.dir/db/version_edit_handler.cc.o -c /Users/jaepil/work/deepsearch/deps/cpp/rocksdb/db/version_edit_handler.cc
/Users/jaepil/work/deepsearch/deps/cpp/rocksdb/db/version_edit_handler.cc:30:10: error: variable 'recovered_edits' set but not used [-Werror,-Wunused-but-set-variable]
size_t recovered_edits = 0;
^
1 error generated.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11234
Reviewed By: cbi42
Differential Revision: D43458604
Pulled By: ajkr
fbshipit-source-id: d8c50e1a108887b037a120cd9f19374ddaeee817
|
|
|
anand76
|
cf09917c18 |
Add filter/index/data secondary cache hits stats (#11246)
Summary: Add more stats for better visibility into the usefulness of the secondary cache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11246 Test Plan: Add a new unit test Reviewed By: akankshamahajan15 Differential Revision: D43521364 Pulled By: anand1976 fbshipit-source-id: a92f04884e738a9bf40ad4047acaaaea343838a7 |
|
|
mrambacher
|
b6640c3117 |
Remove FactoryFunc from LoadXXXObject (#11203)
Summary: The primary purpose of the FactoryFunc was to support LITE mode where the ObjectRegistry was not available. With the removal of LITE mode, the function was no longer required. Note that the MergeOperator had some private classes defined in header files. To gain access to their constructors (and name methods), the class definitions were moved into header files. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11203 Reviewed By: cbi42 Differential Revision: D43160255 Pulled By: pdillinger fbshipit-source-id: f3a465fd5d1a7049b73ecf31e4b8c3762f6dae6c |
|
|
Peter Dillinger
|
64a1f7670f |
Customize CompressedSecondaryCache by block kind (#11204)
Summary: Added `do_not_compress_roles` to `CompressedSecondaryCacheOptions` to disable compression on certain kinds of block. Filter blocks are now not compressed by CompressedSecondaryCache by default. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11204 Test Plan: unit test added Reviewed By: anand1976 Differential Revision: D43147698 Pulled By: pdillinger fbshipit-source-id: db496975ae975fa18f157f93fe131a16315ac875 |
|
|
Wentian Guo
|
42d6652ba2 |
remove dependency on options.h for port_posix.h andport_win.h (#11214)
Summary: The files in `port/`, such as `port_posix.h`, are layering over the system libraries, so shouldn't include the DB-specific files like `options.h`. This PR remove this dependency. # How The reason that `port_posix.h` (or `port_win.h`) include `options.h` is to use `CpuPriority`, as there is a method `SetCpuPriority()` in `port_posix.h` that uses `CpuPriority.` - I think `SetCpuPriority()` make sense to exist in `port_posix.h` as it provides has platform-dependent implementation - `CpuPriority` enum is defined in `env.h`, but used in `rocksdb/include` and `port/`. Hence, let us define `CpuPriority` enum in a common file, say `port_defs.h`, such that both directories `rocksdb/include` and `port/` can include. When we remove this dependency, some other files have compile errors because they can't find definitions, so add header files to resolve # Test make all check -j Pull Request resolved: https://github.com/facebook/rocksdb/pull/11214 Reviewed By: pdillinger Differential Revision: D43196910 Pulled By: guowentian fbshipit-source-id: 70deccb72844cfb08fcc994f76c6ef6df5d55ab9 |
|
|
Peter Dillinger
|
3cacd4b4ec |
Put Cache and CacheWrapper in new public header (#11192)
Summary: The definition of the Cache class should not be needed by the vast majority of RocksDB users, so I think it is just distracting to include it in cache.h, which is primarily needed for configuring and creating caches. This change moves the class to a new header advanced_cache.h. It is just cut-and-paste except for modifying the class API comment. In general, operations on shared_ptr<Cache> should continue to work when only a forward declaration of Cache is available, as long as all the Cache instances provided are already shared_ptr. See https://stackoverflow.com/a/17650101/454544 Also, the most common way to customize a Cache is by wrapping an existing implementation, so it makes sense to provide CacheWrapper in the public API. This was a cut-and-paste job except removing the implementation of Name() so that derived classes must provide it. Intended follow-up: consolidate Release() into one function to reduce customization bugs / confusion Pull Request resolved: https://github.com/facebook/rocksdb/pull/11192 Test Plan: `make check` Reviewed By: anand1976 Differential Revision: D43055487 Pulled By: pdillinger fbshipit-source-id: 7b05492df35e0f30b581b4c24c579bc275b6d110 |
|
|
sdong
|
4720ba4391 |
Remove RocksDB LITE (#11147)
Summary: We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support. Most of changes were done through following comments: unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'` by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147 Test Plan: See CI Reviewed By: pdillinger Differential Revision: D42796341 fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2 |
|
|
sdong
|
2800aa069a |
Remove compressed block cache (#11117)
Summary: Compressed block cache is replaced by compressed secondary cache. Remove the feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11117 Test Plan: See CI passes Reviewed By: pdillinger Differential Revision: D42700164 fbshipit-source-id: 6cbb24e460da29311150865f60ecb98637f9f67d |
|
|
Peter Dillinger
|
9f7801c5f1 |
Major Cache refactoring, CPU efficiency improvement (#10975)
Summary: This is several refactorings bundled into one to avoid having to incrementally re-modify uses of Cache several times. Overall, there are breaking changes to Cache class, and it becomes more of low-level interface for implementing caches, especially block cache. New internal APIs make using Cache cleaner than before, and more insulated from block cache evolution. Hopefully, this is the last really big block cache refactoring, because of rather effectively decoupling the implementations from the uses. This change also removes the EXPERIMENTAL designation on the SecondaryCache support in Cache. It seems reasonably mature at this point but still subject to change/evolution (as I warn in the API docs for Cache). The high-level motivation for this refactoring is to minimize code duplication / compounding complexity in adding SecondaryCache support to HyperClockCache (in a later PR). Other benefits listed below. * static_cast lines of code +29 -35 (net removed 6) * reinterpret_cast lines of code +6 -32 (net removed 26) ## cache.h and secondary_cache.h * Always use CacheItemHelper with entries instead of just a Deleter. There are several motivations / justifications: * Simpler for implementations to deal with just one Insert and one Lookup. * Simpler and more efficient implementation because we don't have to track which entries are using helpers and which are using deleters * Gets rid of hack to classify cache entries by their deleter. Instead, the CacheItemHelper includes a CacheEntryRole. This simplifies a lot of code (cache_entry_roles.h almost eliminated). Fixes https://github.com/facebook/rocksdb/issues/9428. * Makes it trivial to adjust SecondaryCache behavior based on kind of block (e.g. don't re-compress filter blocks). * It is arguably less convenient for many direct users of Cache, but direct users of Cache are now rare with introduction of typed_cache.h (below). * I considered and rejected an alternative approach in which we reduce customizability by assuming each secondary cache compatible value starts with a Slice referencing the uncompressed block contents (already true or mostly true), but we apparently intend to stack secondary caches. Saving an entry from a compressed secondary to a lower tier requires custom handling offered by SaveToCallback, etc. * Make CreateCallback part of the helper and introduce CreateContext to work with it (alternative to https://github.com/facebook/rocksdb/issues/10562). This cleans up the interface while still allowing context to be provided for loading/parsing values into primary cache. This model works for async lookup in BlockBasedTable reader (reader owns a CreateContext) under the assumption that it always waits on secondary cache operations to finish. (Otherwise, the CreateContext could be destroyed while async operation depending on it continues.) This likely contributes most to the observed performance improvement because it saves an std::function backed by a heap allocation. * Use char* for serialized data, e.g. in SaveToCallback, where void* was confusingly used. (We use `char*` for serialized byte data all over RocksDB, with many advantages over `void*`. `memcpy` etc. are legacy APIs that should not be mimicked.) * Add a type alias Cache::ObjectPtr = void*, so that we can better indicate the intent of the void* when it is to be the object associated with a Cache entry. Related: started (but did not complete) a refactoring to move away from "value" of a cache entry toward "object" or "obj". (It is confusing to call Cache a key-value store (like DB) when it is really storing arbitrary in-memory objects, not byte strings.) * Remove unnecessary key param from DeleterFn. This is good for efficiency in HyperClockCache, which does not directly store the cache key in memory. (Alternative to https://github.com/facebook/rocksdb/issues/10774) * Add allocator to Cache DeleterFn. This is a kind of future-proofing change in case we get more serious about using the Cache allocator for memory tracked by the Cache. Right now, only the uncompressed block contents are allocated using the allocator, and a pointer to that allocator is saved as part of the cached object so that the deleter can use it. (See CacheAllocationPtr.) If in the future we are able to "flatten out" our Cache objects some more, it would be good not to have to track the allocator as part of each object. * Removes legacy `ApplyToAllCacheEntries` and changes `ApplyToAllEntries` signature for Deleter->CacheItemHelper change. ## typed_cache.h Adds various "typed" interfaces to the Cache as internal APIs, so that most uses of Cache can use simple type safe code without casting and without explicit deleters, etc. Almost all of the non-test, non-glue code uses of Cache have been migrated. (Follow-up work: CompressedSecondaryCache deserves deeper attention to migrate.) This change expands RocksDB's internal usage of metaprogramming and SFINAE (https://en.cppreference.com/w/cpp/language/sfinae). The existing usages of Cache are divided up at a high level into these new interfaces. See updated existing uses of Cache for examples of how these are used. * PlaceholderCacheInterface - Used for making cache reservations, with entries that have a charge but no value. * BasicTypedCacheInterface<TValue> - Used for primary cache storage of objects of type TValue, which can be cleaned up with std::default_delete<TValue>. The role is provided by TValue::kCacheEntryRole or given in an optional template parameter. * FullTypedCacheInterface<TValue, TCreateContext> - Used for secondary cache compatible storage of objects of type TValue. In addition to BasicTypedCacheInterface constraints, we require TValue::ContentSlice() to return persistable data. This simplifies usage for the normal case of simple secondary cache compatibility (can give you a Slice to the data already in memory). In addition to TCreateContext performing the role of Cache::CreateContext, it is also expected to provide a factory function for creating TValue. * For each of these, there's a "Shared" version (e.g. FullTypedSharedCacheInterface) that holds a shared_ptr to the Cache, rather than assuming external ownership by holding only a raw `Cache*`. These interfaces introduce specific handle types for each interface instantiation, so that it's easy to see what kind of object is controlled by a handle. (Ultimately, this might not be worth the extra complexity, but it seems OK so far.) Note: I attempted to make the cache 'charge' automatically inferred from the cache object type, such as by expecting an ApproximateMemoryUsage() function, but this is not so clean because there are cases where we need to compute the charge ahead of time and don't want to re-compute it. ## block_cache.h This header is essentially the replacement for the old block_like_traits.h. It includes various things to support block cache access with typed_cache.h for block-based table. ## block_based_table_reader.cc Before this change, accessing the block cache here was an awkward mix of static polymorphism (template TBlocklike) and switch-case on a dynamic BlockType value. This change mostly unifies on static polymorphism, relying on minor hacks in block_cache.h to distinguish variants of Block. We still check BlockType in some places (especially for stats, which could be improved in follow-up work) but at least the BlockType is a static constant from the template parameter. (No more awkward partial redundancy between static and dynamic info.) This likely contributes to the overall performance improvement, but hasn't been tested in isolation. The other key source of simplification here is a more unified system of creating block cache objects: for directly populating from primary cache and for promotion from secondary cache. Both use BlockCreateContext, for context and for factory functions. ## block_based_table_builder.cc, cache_dump_load_impl.cc Before this change, warming caches was super ugly code. Both of these source files had switch statements to basically transition from the dynamic BlockType world to the static TBlocklike world. None of that mess is needed anymore as there's a new, untyped WarmInCache function that handles all the details just as promotion from SecondaryCache would. (Fixes `TODO akanksha: Dedup below code` in block_based_table_builder.cc.) ## Everything else Mostly just updating Cache users to use new typed APIs when reasonably possible, or changed Cache APIs when not. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10975 Test Plan: tests updated Performance test setup similar to https://github.com/facebook/rocksdb/issues/10626 (by cache size, LRUCache when not "hyper" for HyperClockCache): 34MB 1thread base.hyper -> kops/s: 0.745 io_bytes/op: 2.52504e+06 miss_ratio: 0.140906 max_rss_mb: 76.4844 34MB 1thread new.hyper -> kops/s: 0.751 io_bytes/op: 2.5123e+06 miss_ratio: 0.140161 max_rss_mb: 79.3594 34MB 1thread base -> kops/s: 0.254 io_bytes/op: 1.36073e+07 miss_ratio: 0.918818 max_rss_mb: 45.9297 34MB 1thread new -> kops/s: 0.252 io_bytes/op: 1.36157e+07 miss_ratio: 0.918999 max_rss_mb: 44.1523 34MB 32thread base.hyper -> kops/s: 7.272 io_bytes/op: 2.88323e+06 miss_ratio: 0.162532 max_rss_mb: 516.602 34MB 32thread new.hyper -> kops/s: 7.214 io_bytes/op: 2.99046e+06 miss_ratio: 0.168818 max_rss_mb: 518.293 34MB 32thread base -> kops/s: 3.528 io_bytes/op: 1.35722e+07 miss_ratio: 0.914691 max_rss_mb: 264.926 34MB 32thread new -> kops/s: 3.604 io_bytes/op: 1.35744e+07 miss_ratio: 0.915054 max_rss_mb: 264.488 233MB 1thread base.hyper -> kops/s: 53.909 io_bytes/op: 2552.35 miss_ratio: 0.0440566 max_rss_mb: 241.984 233MB 1thread new.hyper -> kops/s: 62.792 io_bytes/op: 2549.79 miss_ratio: 0.044043 max_rss_mb: 241.922 233MB 1thread base -> kops/s: 1.197 io_bytes/op: 2.75173e+06 miss_ratio: 0.103093 max_rss_mb: 241.559 233MB 1thread new -> kops/s: 1.199 io_bytes/op: 2.73723e+06 miss_ratio: 0.10305 max_rss_mb: 240.93 233MB 32thread base.hyper -> kops/s: 1298.69 io_bytes/op: 2539.12 miss_ratio: 0.0440307 max_rss_mb: 371.418 233MB 32thread new.hyper -> kops/s: 1421.35 io_bytes/op: 2538.75 miss_ratio: 0.0440307 max_rss_mb: 347.273 233MB 32thread base -> kops/s: 9.693 io_bytes/op: 2.77304e+06 miss_ratio: 0.103745 max_rss_mb: 569.691 233MB 32thread new -> kops/s: 9.75 io_bytes/op: 2.77559e+06 miss_ratio: 0.103798 max_rss_mb: 552.82 1597MB 1thread base.hyper -> kops/s: 58.607 io_bytes/op: 1449.14 miss_ratio: 0.0249324 max_rss_mb: 1583.55 1597MB 1thread new.hyper -> kops/s: 69.6 io_bytes/op: 1434.89 miss_ratio: 0.0247167 max_rss_mb: 1584.02 1597MB 1thread base -> kops/s: 60.478 io_bytes/op: 1421.28 miss_ratio: 0.024452 max_rss_mb: 1589.45 1597MB 1thread new -> kops/s: 63.973 io_bytes/op: 1416.07 miss_ratio: 0.0243766 max_rss_mb: 1589.24 1597MB 32thread base.hyper -> kops/s: 1436.2 io_bytes/op: 1357.93 miss_ratio: 0.0235353 max_rss_mb: 1692.92 1597MB 32thread new.hyper -> kops/s: 1605.03 io_bytes/op: 1358.04 miss_ratio: 0.023538 max_rss_mb: 1702.78 1597MB 32thread base -> kops/s: 280.059 io_bytes/op: 1350.34 miss_ratio: 0.023289 max_rss_mb: 1675.36 1597MB 32thread new -> kops/s: 283.125 io_bytes/op: 1351.05 miss_ratio: 0.0232797 max_rss_mb: 1703.83 Almost uniformly improving over base revision, especially for hot paths with HyperClockCache, up to 12% higher throughput seen (1597MB, 32thread, hyper). The improvement for that is likely coming from much simplified code for providing context for secondary cache promotion (CreateCallback/CreateContext), and possibly from less branching in block_based_table_reader. And likely a small improvement from not reconstituting key for DeleterFn. Reviewed By: anand1976 Differential Revision: D42417818 Pulled By: pdillinger fbshipit-source-id: f86bfdd584dce27c028b151ba56818ad14f7a432 |
|
|
Peter Dillinger
|
e079d562af |
Add a SecondaryCache::InsertSaved() API, use in CacheDumper impl (#10945)
Summary: Can simplify some ugly code in cache_dump_load_impl.cc by having an API in SecondaryCache that can directly consume persisted data. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10945 Test Plan: existing tests for CacheDumper, added basic unit test Reviewed By: anand1976 Differential Revision: D41231497 Pulled By: pdillinger fbshipit-source-id: b8ec993ef7d3e7efd68aae8602fd3f858da58068 |
|
|
Peter Dillinger
|
3182beeffc |
Observe and warn about misconfigured HyperClockCache (#10965)
Summary: Background. One of the core risks of chosing HyperClockCache is ending up with degraded performance if estimated_entry_charge is very significantly wrong. Too low leads to under-utilized hash table, which wastes a bit of (tracked) memory and likely increases access times due to larger working set size (more TLB misses). Too high leads to fully populated hash table (at some limit with reasonable lookup performance) and not being able to cache as many objects as the memory limit would allow. In either case, performance degradation is graceful/continuous but can be quite significant. For example, cutting block size in half without updating estimated_entry_charge could lead to a large portion of configured block cache memory (up to roughly 1/3) going unused. Fix. This change adds a mechanism through which the DB periodically probes the block cache(s) for "problems" to report, and adds diagnostics to the HyperClockCache for bad estimated_entry_charge. The periodic probing is currently done with DumpStats / stats_dump_period_sec, and diagnostics reported to info_log (normally LOG file). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10965 Test Plan: unit test included. Doesn't cover all the implemented subtleties of reporting, but ensures basics of when to report or not. Also manual testing with db_bench. Create db with ``` ./db_bench --benchmarks=fillrandom,flush --num=3000000 --disable_wal=1 ``` Use and check LOG file for HyperClockCache for various block sizes (used as estimated_entry_charge) ``` ./db_bench --use_existing_db --benchmarks=readrandom --num=3000000 --duration=20 --stats_dump_period_sec=8 --cache_type=hyper_clock_cache -block_size=XXXX ``` Seeing warnings / errors or not as expected. Reviewed By: anand1976 Differential Revision: D41406932 Pulled By: pdillinger fbshipit-source-id: 4ca56162b73017e4b9cec2cad74466f49c27a0a7 |
|
|
Peter Dillinger
|
8c0f5b1fcf |
Mark HyperClockCache as production-ready (#10963)
Summary: After a couple minor bug fixes and successful productions roll-outs in a few places, I think we can mark this as production-ready. It has a clear value proposition for many workloads, even if we don't have clear advice for every workload yet. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10963 Test Plan: existing tests, comment changes only Reviewed By: siying Differential Revision: D41384083 Pulled By: pdillinger fbshipit-source-id: 56359f01a57bb28de8697666b342382fac72ce6d |
|
|
Peter Dillinger
|
32520df1d9 |
Remove prototype FastLRUCache (#10954)
Summary: This was just a stepping stone to what eventually became HyperClockCache, and is now just more code to maintain. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10954 Test Plan: tests updated Reviewed By: akankshamahajan15 Differential Revision: D41310123 Pulled By: pdillinger fbshipit-source-id: 618ee148a1a0a29ee756ba8fe28359617b7cd67c |
|
|
Peter Dillinger
|
f321e8fc98 |
Don't attempt to use SecondaryCache on block_cache_compressed (#10944)
Summary: Compressed block cache depends on reading the block compression marker beyond the payload block size. Only the payload bytes were being saved and loaded from SecondaryCache -> boom! This removes some unnecessary code attempting to combine these two competing features. Note that BlockContents was previously used for block-based filter in block cache, but that support has been removed. Also marking block_cache_compressed as deprecated in this commit as we expect it to be replaced with SecondaryCache. This problem was discovered during refactoring but didn't want to combine bug fix with that refactoring. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10944 Test Plan: test added that fails on base revision (at least with ASAN) Reviewed By: akankshamahajan15 Differential Revision: D41205578 Pulled By: pdillinger fbshipit-source-id: 1b29d36c7a6552355ac6511fcdc67038ef4af29f |
|
|
Peter Dillinger
|
cc8c8f6958 |
Refactor (Hyper)ClockCache code (#10887)
Summary: For clean-up and in preparation for some other anticipated changes, including * A new dynamically-scaling variant of HyperClockCache * SecondaryCache support for HyperClockCache This change does some refactoring for current and future code sharing and reusability. (Including follow-up on https://github.com/facebook/rocksdb/issues/10843) ## clock_cache.h * TBD whether new variant will be a HyperClockCache or use some other name, so namespace is just clock_cache for the family of structures. * A number of helper functions introduced and used. * Pre-emptively split ClockHandle (shared among lock-free clock cache variants) and HandleImpl (specific to a kind of Table), and introduce template to plug new Table implementation into ClockCacheShard. ## clock_cache.cc * Mostly using helper functions. Some things like `Rollback()` and `FreeDataMarkEmpty()` were not combined because `Rollback()` is Table-specific while `FreeDataMarkEmpty()` can be used with different table implementations. * Performance testing indicated that despite more opportunities for parallelism, making a local copy of handle data for processing after marking an entry empty was slower than doing that processing before marking the entry empty (but after marking it "under construction"), thus avoiding a few words of copying data. At least for now, this answers the "TODO? Delay freeing?" questions (no). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10887 Test Plan: fixed a unit testing gap; other minor test updates for refactoring No functionality change ## Performance Same setup as https://github.com/facebook/rocksdb/issues/10801: Before: `readrandom [AVG 81 runs] : 627992 (± 5124) ops/sec` After: `readrandom [AVG 81 runs] : 637512 (± 4866) ops/sec` I've been getting some inconsistent results on restarts like the system is not being fair to the two processes, so I'm not sure there's such a real difference. Reviewed By: anand1976 Differential Revision: D40959240 Pulled By: pdillinger fbshipit-source-id: 0a8f3646b3bdb5bc7aaad60b26790b0779189949 |
|
|
Denis Hananein
|
9f3475eccf |
Fix compilation errors, clang++-15 (#10907)
Summary:
I've tried to compile the main branch, but there are two minor things which are make CE.
I'm not sure about the second one (`num_empty_non_l0_level`), probably there is should be additional assert.
```
-c ../cache/clock_cache.cc
[build] ../cache/clock_cache.cc:855:15: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
[build] for (size_t i = 0; &array_[current] != h; i++) {
[build] ^
```
```
[build] ../db/version_set.cc:3665:7: error: variable 'num_empty_non_l0_level' set but not used [-Werror,-Wunused-but-set-variable]
[build] int num_empty_non_l0_level = 0;
[build] ^
[build] 1 error generated.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10907
Reviewed By: jay-zhuang
Differential Revision: D40866667
Pulled By: ajkr
fbshipit-source-id: 963b7bd56859d0b3b2779cd36fad229425cb7b17
|