mirror of
https://github.com/facebook/rocksdb.git
synced 2024-12-04 20:02:50 +00:00
206 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Andrew Kryczka
|
0fef690bd5 |
Sync non-latest WALs during flush for 2PC, single-CF DBs (#12622)
Summary: Previously we skipped syncing the non-latest WALs during memtable flush when the DB had only one column family. Normally that is fine because those non-latest WALs would not be read by recovery. However, in case of `DBOptions::allow_2pc == true`, there could be unmatched prepare records in those WALs making them needed by recovery. As a result, the missing sync could have resulted in the recovered WAL state falling behind the recovered SST state. When we detect that case, we return a `Status::Corruption` saying "SST file is ahead of WALs". This PR proposes syncing the WAL in case of `DBOptions::allow_2pc`. This introduces the sync in some scenarios where it isn't needed (e.g., non-recent WALs contain no prepares) but I suspect the simplicity is worth it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12622 Reviewed By: cbi42 Differential Revision: D56987303 Pulled By: ajkr fbshipit-source-id: 7fe9395458018a18d77e907a3b5429065c0e2e48 |
||
|
Andrew Kryczka
|
2ec25a3e54 |
Prevent data block compression with BlockBasedTableOptions::block_align (#12592)
Summary: Made `BlockBasedTableOptions::block_align` incompatible (i.e., APIs will return `Status::InvalidArgument`) with more ways of enabling compression: `CompactionOptions::compression`, `ColumnFamilyOptions::compression_per_level`, and `ColumnFamilyOptions::bottommost_compression`. Previously it was only incompatible with `ColumnFamilyOptions::compression`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12592 Reviewed By: hx235 Differential Revision: D56650862 Pulled By: ajkr fbshipit-source-id: f5201602c2ce436e6d8d30893caa6a161a61f141 |
||
|
Andrew Kryczka
|
6807da0b44 |
Fix DisableManualCompaction() hang (#12578)
Summary: Prior to this PR the following sequence could happen: 1. `RunManualCompaction()` A schedules compaction to thread pool and waits 2. `RunManualCompaction()` B waits without scheduling anything due to conflict 3. `DisableManualCompaction()` bumps `manual_compaction_paused_` and wakes up both 4. `RunManualCompaction()` A (`scheduled && !unscheduled`) unschedules its compaction and marks itself done 5. `RunManualCompaction()` B (`!scheduled && !unscheduled`) schedules compaction to thread pool 6. `RunManualCompaction()` B (`scheduled && !unscheduled`) waits on its compaction 7. `RunManualCompaction()` B at some point wakes up and finishes, either by unscheduling or by compaction execution 8. `DisableManualCompaction()` returns as there are no more manual compactions running Between 6. and 7. the wait can be long while the compaction sits in the thread pool queue. That wait is unnecessary. This PR changes the behavior from step 5. onward: 5'. `RunManualCompaction()` B (`!scheduled && !unscheduled`) marks itself done 6'. `DisableManualCompaction()` returns as there are no more manual compactions running Pull Request resolved: https://github.com/facebook/rocksdb/pull/12578 Reviewed By: cbi42 Differential Revision: D56528144 Pulled By: ajkr fbshipit-source-id: 4da2467376d7d4ff435547aa74dd8f118db0c03b |
||
|
Jay Huh
|
4f584652ab |
Add an option to wait for purge in WaitForCompact (#12520)
Summary: Adding an option to wait for purge to complete in `WaitForCompact` API. Internally, RocksDB has a way to wait for purge to complete (e.g. TEST_WaitForPurge() in db_impl_debug.cc), but there's no public API available for gracefully wait for purge to complete. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12520 Test Plan: Unit Test Added - `WaitForCompactWithWaitForPurgeOptionTest` ``` ./deletefile_test -- --gtest_filter="*WaitForCompactWithWaitForPurgeOptionTest*" ``` Existing Tests ``` ./db_compaction_test -- --gtest_filter="*WaitForCompactWithOption*" ``` Reviewed By: ajkr Differential Revision: D55888283 Pulled By: jaykorean fbshipit-source-id: cfc6d6e8657deaefab8961890b36e390095c9f65 |
||
|
Changyu Bi
|
a0aade7e62 |
Add some debug print for flaky test DBCompactionTest.CompactionLimiter (#12509)
Summary:
The unit test fails occasionally can cannot be reproed locally.
```
[ RUN ] DBCompactionTest.CompactionLimiter
db/db_compaction_test.cc:6139: Failure
Expected equality of these values:
cf_count
Which is: 17
env_->GetThreadPoolQueueLen(Env::LOW)
Which is: 15
[ FAILED ] DBCompactionTest.CompactionLimiter (512 ms)
```
Add some debug print to help triaging if it fails again.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12509
Reviewed By: jowlyzhang
Differential Revision: D55770552
Pulled By: cbi42
fbshipit-source-id: 2a39b2199f80352fcf2c6cd2b9c8b81c727eee8c
|
||
|
Hui Xiao
|
d985902ef4 |
Disallow refitting more than 1 file from non-L0 to L0 (#12481)
Summary: **Context/Summary:** We recently discovered that `CompactRange(change_level=true, target_level=0)` can possibly refit more than 1 files to L0. This refitting can cause read performance regression as we need to go through every file in L0, corruption in some edge case and false positive corruption caught by force consistency check. We decided to explicitly disallow such behavior. A related change to OptionChangeMigration(): - When migrating to FIFO with `compaction_options_fifo.max_table_files_size > 0`, RocksDB will [CompactRange() all the to-be-migrate data into a couple L0 files](https://github.com/facebook/rocksdb/blob/main/utilities/option_change_migration/option_change_migration.cc#L164-L169) to avoid dropping all the data upon migration finishes when the migrated data is larger than max_table_files_size. This is achieved by first compacting all the data into a couple non-L0 files and refitting those files from non-L0 to L0 if needed. In that way, only some data instead of all data will be dropped immediately after migration to FIFO with a max_table_files_size. - Since this type of refitting behavior is disallowed from now on, we won't do this trick anymore and explicitly state such risk in API comment. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12481 Test Plan: - New UT - Modified UT Reviewed By: cbi42 Differential Revision: D55351178 Pulled By: hx235 fbshipit-source-id: 9d8854f2f81d7e8aff859c3a4e53b7d688048e80 |
||
|
anand76
|
63a105a481 |
Enable recycle_log_file_num option for point in time recovery (#12403)
Summary: This option was previously disabled due to a bug in the recovery logic. The recovery code in `DBImpl::RecoverLogFiles` couldn't tell if an EoF reported by the log reader was really an EoF or a possible corruption that made a record look like an old log record. To fix this, the log reader now explicitly reports when it encounters what looks like an old record. The recovery code treats it as a possible corruption, and uses the next sequence number in the WAL to determine if it should continue replaying the WAL. This PR also fixes a couple of bugs that log file recycling exposed in the backup and checkpoint path. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12403 Test Plan: 1. Add new unit tests to verify behavior upon corruption 2. Re-enable disabled tests for verifying recycling behavior Reviewed By: ajkr Differential Revision: D54544824 Pulled By: anand1976 fbshipit-source-id: 12f5ce39bd6bc0d63b0bc6432dc4db510e0e802a |
||
|
Yu Zhang
|
13e1c32a18 |
Follow ups for TimedPut and write time property (#12455)
Summary: This PR contains a few follow ups from https://github.com/facebook/rocksdb/issues/12419 and https://github.com/facebook/rocksdb/issues/12428 including: 1) Handle a special case for `WriteBatch::TimedPut`. When the user specified write time is `std::numeric_limits<uint64_t>::max()`, it's not treated as an error, but it instead creates and writes a regular `Put` entry. 2) Update the `InternalIterator::write_unix_time` APIs to handle `kTypeValuePreferredSeqno` entries. 3) FlushJob is updated to use the seqno to time mapping copy in `SuperVersion`. FlushJob currently copy the DB's seqno to time mapping while holding db mutex and only copies the part of interest, a.k.a, the part that only goes back to the earliest sequence number of the to-be-flushed memtables. While updating FlushJob to use the mapping copy in `SuperVersion`, it's given access to the full mapping to help cover the need to convert `kTypeValuePreferredSeqno`'s write time to preferred seqno as much as possible. Test plans: Added unit tests Pull Request resolved: https://github.com/facebook/rocksdb/pull/12455 Reviewed By: pdillinger Differential Revision: D55165422 Pulled By: jowlyzhang fbshipit-source-id: dc022653077f678c24661de5743146a74cce4b47 |
||
|
yuzhangyu@fb.com
|
1cfdece85d |
Run internal cpp modernizer on RocksDB repo (#12398)
Summary: When internal cpp modernizer attempts to format rocksdb code, it will replace macro `ROCKSDB_NAMESPACE` with its default definition `rocksdb` when collapsing nested namespace. We filed a feedback for the tool T180254030 and the team filed a bug for this: https://github.com/llvm/llvm-project/issues/83452. At the same time, they suggested us to run the modernizer tool ourselves so future auto codemod attempts will be smaller. This diff contains: Running `xplat/scripts/codemod_service/cpp_modernizer.sh` in fbcode/internal_repo_rocksdb/repo (excluding some directories in utilities/transactions/lock/range/range_tree/lib that has a non meta copyright comment) without swapping out the namespace macro `ROCKSDB_NAMESPACE` Followed by RocksDB's own `make format` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12398 Test Plan: Auto tests Reviewed By: hx235 Differential Revision: D54382532 Pulled By: jowlyzhang fbshipit-source-id: e7d5b40f9b113b60e5a503558c181f080b9d02fa |
||
|
Peter Dillinger
|
13ef21c22e |
default_write_temperature option (#12388)
Summary: Currently SST files that aren't applicable to last_level_temperature nor file_temperature_age_thresholds are written with temperature kUnknown, which is a little weird and doesn't support CF-based tiering. The default_temperature option only affects how kUnknown is interpreted for stats. This change adds a new per-CF option default_write_temperature that determines the temperature of new SST files when those other options do not apply. Also made a change to ignore last_level_temperature with FIFO compaction, because I found that could lead to an infinite loop in compaction. Needed follow-up: Fix temperature handling with external file ingestion Pull Request resolved: https://github.com/facebook/rocksdb/pull/12388 Test Plan: unit tests extended appropriately. (Ignore whitespace changes when reviewing.) Reviewed By: jowlyzhang Differential Revision: D54266574 Pulled By: pdillinger fbshipit-source-id: c9ec9a74dbf22be6e986f77f9689d05fea8ef0bb |
||
|
Peter Dillinger
|
54cb9c77d9 |
Prefer static_cast in place of most reinterpret_cast (#12308)
Summary: The following are risks associated with pointer-to-pointer reinterpret_cast: * Can produce the "wrong result" (crash or memory corruption). IIRC, in theory this can happen for any up-cast or down-cast for a non-standard-layout type, though in practice would only happen for multiple inheritance cases (where the base class pointer might be "inside" the derived object). We don't use multiple inheritance a lot, but we do. * Can mask useful compiler errors upon code change, including converting between unrelated pointer types that you are expecting to be related, and converting between pointer and scalar types unintentionally. I can only think of some obscure cases where static_cast could be troublesome when it compiles as a replacement: * Going through `void*` could plausibly cause unnecessary or broken pointer arithmetic. Suppose we have `struct Derived: public Base1, public Base2`. If we have `Derived*` -> `void*` -> `Base2*` -> `Derived*` through reinterpret casts, this could plausibly work (though technical UB) assuming the `Base2*` is not dereferenced. Changing to static cast could introduce breaking pointer arithmetic. * Unnecessary (but safe) pointer arithmetic could arise in a case like `Derived*` -> `Base2*` -> `Derived*` where before the Base2 pointer might not have been dereferenced. This could potentially affect performance. With some light scripting, I tried replacing pointer-to-pointer reinterpret_casts with static_cast and kept the cases that still compile. Most occurrences of reinterpret_cast have successfully been changed (except for java/ and third-party/). 294 changed, 257 remain. A couple of related interventions included here: * Previously Cache::Handle was not actually derived from in the implementations and just used as a `void*` stand-in with reinterpret_cast. Now there is a relationship to allow static_cast. In theory, this could introduce pointer arithmetic (as described above) but is unlikely without multiple inheritance AND non-empty Cache::Handle. * Remove some unnecessary casts to void* as this is allowed to be implicit (for better or worse). Most of the remaining reinterpret_casts are for converting to/from raw bytes of objects. We could consider better idioms for these patterns in follow-up work. I wish there were a way to implement a template variant of static_cast that would only compile if no pointer arithmetic is generated, but best I can tell, this is not possible. AFAIK the best you could do is a dynamic check that the void* conversion after the static cast is unchanged. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12308 Test Plan: existing tests, CI Reviewed By: ltamasi Differential Revision: D53204947 Pulled By: pdillinger fbshipit-source-id: 9de23e618263b0d5b9820f4e15966876888a16e2 |
||
|
Yu Zhang
|
e3e8fbb497 |
Add a separate range classes for internal usage (#12071)
Summary: Introduce some different range classes `UserKeyRange` and `UserKeyRangePtr` to be used by internal implementation. The `Range` class is used in both public APIs like `DB::GetApproximateSizes`, `DB::GetApproximateMemTableStats`, `DB::GetPropertiesOfTablesInRange` etc and internal implementations like `ColumnFamilyData::RangesOverlapWithMemtables`, `VersionSet::GetPropertiesOfTablesInRange`. These APIs have different expectations of what keys this range class contain. Public API users are supposed to populate the range with the user keys without timestamp, in the same way that point lookup and range scan APIs' key input only expect the user key without timestamp. The internal APIs implementation expect a user key whose format is compatible with the user comparator, a.k.a a user key with the timestamp. This PR contains: 1) introducing counterpart range class `UserKeyRange` `UserKeyRangePtr` for internal implementation while leave the existing `Range` and `RangePtr` class only for public APIs. Internal implementations are updated to use this new class instead. 2) add user-defined timestamp support for `DB::GetPropertiesOfTablesInRange` API and `DeleteFilesInRanges` API. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12071 Test Plan: existing tests Added test for `DB::GetPropertiesOfTablesInRange` and `DeleteFilesInRanges` APIs for when user-defined timestamp is enabled. The change in external_file_ingestion_job doesn't have a user-defined timestamp enabled test case coverage, will add one in a follow up PR that adds file ingestion support for UDT. Reviewed By: ltamasi Differential Revision: D53292608 Pulled By: jowlyzhang fbshipit-source-id: 9a9279e23c640a6d8f8232636501a95aef7638b8 |
||
|
Peter Dillinger
|
61ed0de600 |
Add more detail to some statuses (#12307)
Summary: and also fix comment/label on some MacOS CI jobs. Motivated by a crash test failure missing a definitive indicator of the genesis of the status: ``` file ingestion error: Operation failed. Try again.: ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12307 Test Plan: just cosmetic changes. These statuses should not arise frequently enough to be a performance issue (copying messages). Reviewed By: jaykorean Differential Revision: D53199529 Pulled By: pdillinger fbshipit-source-id: ad83daaa5d80f75c9f81158e90fb6d9ecca33fe3 |
||
|
Hui Xiao
|
06e593376c |
Group SST write in flush, compaction and db open with new stats (#11910)
Summary: ## Context/Summary Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity. For that, this PR does the following: - Tag different write IOs by passing down and converting WriteOptions to IOOptions - Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS Some related code refactory to make implementation cleaner: - Blob stats - Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info. - Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write. - Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority - Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification - Build table - TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables - Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder. This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more - Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority ## Test ### db bench Flush ``` ./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100 rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 ``` compaction, db oopen ``` Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279 rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213 rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66 ``` blob stats - just to make sure they aren't broken by this PR ``` Integrated Blob DB Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600 rocksdb.blobdb.blob.file.synced COUNT : 1 rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same) ``` ``` Stacked Blob DB Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876 rocksdb.blobdb.blob.file.synced COUNT : 8 rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same) ``` ### Rehearsal CI stress test Trigger 3 full runs of all our CI stress tests ### Performance Flush ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark; enable_statistics = true Pre-pr: avg 507515519.3 ns 497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908, Post-pr: avg 511971266.5 ns, regressed 0.88% 502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408, ``` Compaction ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 495346098.30 ns 492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846 Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97% 502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007 ``` Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats) ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 3848.10 ns 3814,3838,3839,3848,3854,3854,3854,3860,3860,3860 Post-pr: avg 3874.20 ns, regressed 0.68% 3863,3867,3871,3874,3875,3877,3877,3877,3880,3881 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910 Reviewed By: ajkr Differential Revision: D49788060 Pulled By: hx235 fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff |
||
|
Yu Zhang
|
d68f45e777 |
Flush buffered logs when FlushRequest is rescheduled (#12105)
Summary: The optimization to not find and delete obsolete files when FlushRequest is re-scheduled also inadvertently skipped flushing the `LogBuffer`, resulting in missed logs. This PR fixes the issue. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12105 Test Plan: manually check this test has the correct info log after the fix `./column_family_test --gtest_filter=ColumnFamilyRetainUDTTest.NotAllKeysExpiredFlushRescheduled` Reviewed By: ajkr Differential Revision: D51671079 Pulled By: jowlyzhang fbshipit-source-id: da0640e07e35c69c08988772ed611ec9e67f2e92 |
||
|
Jay Huh
|
e230e4d248 |
Make OffpeakTimeInfo available in VersionSet (#12018)
Summary: As mentioned in https://github.com/facebook/rocksdb/issues/11893, we are going to use the offpeak time information to pre-process TTL-based compactions. To do so, we need to access `daily_offpeak_time_utc` in `VersionStorageInfo::ComputeCompactionScore()` where we pick the files to compact. This PR is to make the offpeak time information available at the time of compaction-scoring. We are not changing any compaction scoring logic just yet. Will follow up in a separate PR. There were two ways to achieve what we want. 1. Make `MutableDBOptions` available in `ColumnFamilyData` and `ComputeCompactionScore()` take `MutableDBOptions` along with `ImmutableOptions` and `MutableCFOptions`. 2. Make `daily_offpeak_time_utc` and `IsNowOffpeak()` available in `VersionStorageInfo`. We chose the latter as it involves smaller changes. This change includes the following - Introduction of `OffpeakTimeInfo` and `IsNowOffpeak()` has been moved from `MutableDBOptions` - `OffpeakTimeInfo` added to `VersionSet` and it can be set during construction and by `ChangeOffpeakTimeInfo()` - During `SetDBOptions()`, if offpeak time info needs to change, it calls `MaybeScheduleFlushOrCompaction()` to re-compute compaction scores and process compactions as needed Pull Request resolved: https://github.com/facebook/rocksdb/pull/12018 Test Plan: - `DBOptionsTest::OffpeakTimes` changed to include checks for `MaybeScheduleFlushOrCompaction()` calls and `VersionSet`'s OffpeakTimeInfo value change during `SetDBOptions()`. - `VersionSetTest::OffpeakTimeInfoTest` added to test `ChangeOffpeakTimeInfo()`. `IsNowOffpeak()` tests moved from `DBOptionsTest::OffpeakTimes` Reviewed By: pdillinger Differential Revision: D50723881 Pulled By: jaykorean fbshipit-source-id: 3cff0291936f3729c0e9c7750834b9378fb435f6 |
||
|
Hui Xiao
|
0836a2b26d |
New tickers on deletion compactions grouped by reasons (#11957)
Summary: Context/Summary: as titled Pull Request resolved: https://github.com/facebook/rocksdb/pull/11957 Test Plan: piggyback on existing tests; fixed a failed test due to adding new stats Reviewed By: ajkr, cbi42 Differential Revision: D50294310 Pulled By: hx235 fbshipit-source-id: d99b97ebac41efc1bdeaf9ca7a1debd2927d54cd |
||
|
Changyu Bi
|
6e3429b8a6 |
Fix data race in accessing recovery_in_prog_ (#11950)
Summary:
We saw the following TSAN stress test failure:
```
WARNING: ThreadSanitizer: data race (pid=17523)
Write of size 1 at 0x7b8c000008b9 by thread T4243 (mutexes: write M0):
#0 rocksdb::ErrorHandler::RecoverFromRetryableBGIOError() fbcode/internal_repo_rocksdb/repo/db/error_handler.cc:742 (db_stress+0x95f954) (BuildId: 35795dfb86ddc9c4f20ddf08a491f24d)
https://github.com/facebook/rocksdb/issues/1 std:🧵:_State_impl<std:🧵:_Invoker<std::tuple<void (rocksdb::ErrorHandler::*)(), rocksdb::ErrorHandler*>>>::_M_run() fbcode/third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/invoke.h:74 (db_stress+0x95fc2b) (BuildId: 35795dfb86ddc9c4f20ddf08a491f24d)
https://github.com/facebook/rocksdb/issues/2 execute_native_thread_routine /home/engshare/third-party2/libgcc/11.x/src/gcc-11.x/x86_64-facebook-linux/libstdc++-v3/src/c++11/../../../.././libstdc++-v3/src/c++11/thread.cc:82:18 (libstdc++.so.6+0xdf4e4) (BuildId: 452d1cdae868baeeb2fdf1ab140f1c219bf50c6e)
Previous read of size 1 at 0x7b8c000008b9 by thread T22:
#0 rocksdb::DBImpl::SyncClosedLogs(rocksdb::JobContext*, rocksdb::VersionEdit*) fbcode/internal_repo_rocksdb/repo/db/error_handler.h:76 (db_stress+0x84f69c) (BuildId: 35795dfb86ddc9c4f20ddf08a491f24d)
```
This is due to a data race in accessing `recovery_in_prog_`. This PR fixes it by accessing `recovery_in_prog_` under db mutex before calling `SyncClosedLogs()`. I think the original PR https://github.com/facebook/rocksdb/pull/10489 intended to clear the error if it's a recovery flush. So ideally we can also just check flush reason. I plan to keep a safer change in this PR and make that change in the future if needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11950
Test Plan: check future TSAN stress test results.
Reviewed By: anand1976
Differential Revision: D50242255
Pulled By: cbi42
fbshipit-source-id: 0d487948ef9546b038a34460f3bb037f6e5bfc58
|
||
|
darionyaphet
|
ee0829ba76 |
fix typo snapshto (#11817)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/11817 Reviewed By: jaykorean Differential Revision: D50103497 Pulled By: ltamasi fbshipit-source-id: 77c5cf86ff7eb5021fc91b03225882536163af7b |
||
|
Andrew Kryczka
|
10fd05e394 |
Give retry flushes their own functions (#11903)
Summary: Recovery triggers flushes for very different scenarios: (1) `FlushReason::kErrorRecoveryRetryFlush`: a flush failed (2) `FlushReason::kErrorRecovery`: a WAL may be corrupted (3) `FlushReason::kCatchUpAfterErrorRecovery`: immutable memtables may have accumulated The old code called called `FlushAllColumnFamilies()` in all cases, which uses manual flush functions: `AtomicFlushMemTables()` and `FlushMemTable()`. Forcing flushing the latest data on all CFs was useful for (2) because it ensures all CFs move past the corrupted WAL. However, those code paths were overkill for (1) and (3), where only already-immutable memtables need to be flushed. There were conditionals to exclude some of the extraneous logic but I found there was still too much happening. For example, both of the manual flush functions enter the write thread. Entering the write thread is inconvenient because then we can't allow stalled writes to wait on a retrying flush to finish. Instead of continuing down the path of adding more conditionals to the manual flush functions, this PR introduces a dedicated function for cases (1) and (3): `RetryFlushesForErrorRecovery()`. Also I cleaned up the manual flush functions to remove existing conditionals for these cases as they're no longer needed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11903 Reviewed By: cbi42 Differential Revision: D49693812 Pulled By: ajkr fbshipit-source-id: 7630ac539b9d6c92052c13a3cdce53256134d990 |
||
|
Peter Dillinger
|
02443dd93f |
Refactor, clean up, fixes, and more testing for SeqnoToTimeMapping (#11905)
Summary: This change is before a planned DBImpl change to ensure all sufficiently recent sequence numbers since Open are covered by SeqnoToTimeMapping (bug fix with existing test work-arounds). **Intended follow-up** However, I found enough issues with SeqnoToTimeMapping to warrant this PR first, including very small fixes in DB implementation related to API contract of SeqnoToTimeMapping. Functional fixes / changes: * This fixes some mishandling of boundary cases. For example, if the user decides to stop writing to DB, the last written sequence number would perpetually have its write time updated to "now" and would always be ineligible for migration to cold tier. Part of the problem is that the SeqnoToTimeMapping would return a seqno known to have been written before (immediately or otherwise) the requested time, but compaction_job.cc would include that seqno in the preserve/exclude set. That is fixed (in part) by adding one in compaction_job.cc * That problem was worse because a whole range of seqnos could be updated perpetually with new times in SeqnoToTimeMapping::Append (if no writes to DB). That logic was apparently optimized for GetOldestApproximateTime (now GetProximalTimeBeforeSeqno), which is not used in production, to the detriment of GetOldestSequenceNum (now GetProximalSeqnoBeforeTime), which is used in production. (Perhaps plans changed during development?) This is fixed in Append to optimize for accuracy of GetProximalSeqnoBeforeTime. (Unit tests added and updated.) * Related: SeqnoToTimeMapping did not have a clear contract about the relationships between seqnos and times, just the idea of a rough correspondence. Now the class description makes it clear that the write time of each recorded seqno comes before or at the associated time, to support getting best results for GetProximalSeqnoBeforeTime. And this makes it easier to make clear the contract of each API function. * Update `DBImpl::RecordSeqnoToTimeMapping()` to follow this ordering in gathering samples. Some part of these changes has required an expanded test work-around for the problem (see intended follow-up above) that the DB does not immediately ensure recent seqnos are covered by its mapping. These work-arounds will be removed with that planned work. An apparent compaction bug is revealed in PrecludeLastLevelTest::RangeDelsCauseFileEndpointsToOverlap, so that test is disabled. Filed GitHub issue #11909 Cosmetic / code safety things (not exhaustive): * Fix some confusing names. * `seqno_time_mapping` was used inconsistently in places. Now just `seqno_to_time_mapping` to correspond to class name. * Rename confusing `GetOldestSequenceNum` -> `GetProximalSeqnoBeforeTime` and `GetOldestApproximateTime` -> `GetProximalTimeBeforeSeqno`. Part of the motivation is that our times and seqnos here have the same underlying type, so we want to be clear about which is expected where to avoid mixing. * Rename `kUnknownSeqnoTime` to `kUnknownTimeBeforeAll` because the value is a bad choice for unknown if we ever add ProximalAfterBlah functions. * Arithmetic on SeqnoTimePair doesn't make sense except for delta encoding, so use better names / APIs with that in mind. * (OMG) Don't allow direct comparison between SeqnoTimePair and SequenceNumber. (There is no checking that it isn't compared against time by accident.) * A field name essentially matching the containing class name is a confusing pattern (`seqno_time_mapping_`). * Wrap calls to confusing (but useful) upper_bound and lower_bound functions to have clearer names and more code reuse. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11905 Test Plan: GetOldestSequenceNum (now GetProximalSeqnoBeforeTime) and TruncateOldEntries were lacking unit tests, despite both being used in production (experimental feature). Added those and expanded others. Reviewed By: jowlyzhang Differential Revision: D49755592 Pulled By: pdillinger fbshipit-source-id: f72a3baac74d24b963c77e538bba89a7fc8dce51 |
||
|
Changyu Bi
|
0086809601 |
Fix a bug with atomic_flush that causes DB to stuck after a flush failure (#11872)
Summary:
With atomic_flush=true, a flush job with younger memtables wait for older memtables to be installed before install its memtables. If the flush for older memtables failed, auto-recovery starts a resume thread which can becomes stuck waiting for all background work to finish (including the flush for younger memtables). If a non-recovery flush starts now and tries to flush, it can make the situation worse since it will fail due to background error but never rollback its memtable:
|
||
|
Changyu Bi
|
b927ba5936 |
Rollback other pending memtable flushes when a flush fails (#11865)
Summary:
when atomic_flush=false, there are certain cases where we try to install memtable results with already deleted SST files. This can happen when the following sequence events happen:
```
Start Flush0 for memtable M0 to SST0
Start Flush1 for memtable M1 to SST1
Flush 1 returns OK, but don't install to MANIFEST and let whoever flushes M0 to take care of it
Flush0 finishes with a retryable IOError, it rollbacks M0, (incorrectly) does not rollback M1, and deletes SST0 and SST1
Starts Flush2 for M0, it does not pick up M1 since it thought M1 is flushed
Flush2 writes SST2 and finishes OK, tries to install SST2 and SST1
Error opening SST1 since it's already deleted with an error message like the following:
IO error: No such file or directory: While open a file for random read: /tmp/rocksdbtest-501/db_flush_test_3577_4230653031040984171/000011.sst: No such file or directory
```
This happens since:
1. We currently only rollback the memtables that we are flushing in a flush job when atomic_flush=false.
2. Pending output SSTs from previous flushes are deleted since a pending file number is released whenever a flush job is finished no matter of flush status:
|
||
|
Hui Xiao
|
089070cb36 |
Expose more info about input files in CompactionFilter::Context (#11857)
Summary: **Context:** As requested, lowest level as well as a map from input file to its table properties among all input files used in table creation (if any) are exposed in `CompactionFilter::Context`. **Summary:** This PR contains two commits: (1) [Refactory]( |
||
|
Changyu Bi
|
cc254efea6 |
Release compaction files in manifest write callback (#11764)
Summary:
Fixes https://github.com/facebook/rocksdb/issues/10257 (also see [here](https://github.com/facebook/rocksdb/pull/10355#issuecomment-1684308556)) by releasing compaction files earlier when writing to manifest in LogAndApply(). This is done by passing in a [callback](
|
||
|
Yu Zhang
|
fc58c7c62a |
Add UDT support in SstFileDumper (#11757)
Summary: For a SST file that uses user-defined timestamp aware comparators, if a lower or upper bound is set, sst_dump tool doesn't handle it well. This PR adds support for that. While working on this `MaybeAddTimestampsToRange` is moved to the udt_util.h file to be shared. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11757 Test Plan: make all check for changes in db_impl.cc and db_impl_compaction_flush.cc for changes in sst_file_dumper.cc, I manually tested this change handles specifying bounds for UDT use cases. It probably should have a unit test file eventually. Reviewed By: ltamasi Differential Revision: D48668048 Pulled By: jowlyzhang fbshipit-source-id: 1560465f40e44668d6d82a7439fe9012be0e74a8 |
||
|
Jay Huh
|
0fa0c97d3e |
Timeout in microsecond option in WaitForCompactOptions (#11711)
Summary: While it's rare, we may run into a scenario where `WaitForCompact()` waits for background jobs indefinitely. For example, not enough space error will add the job back to the queue while WaitForCompact() waits for _all jobs_ including the jobs that are in the queue to be completed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11711 Test Plan: `DBCompactionWaitForCompactTest::WaitForCompactToTimeout` added `timeout` option added to the variables for all of the existing DBCompactionWaitForCompactTests Reviewed By: pdillinger, jowlyzhang Differential Revision: D48416390 Pulled By: jaykorean fbshipit-source-id: 7b6a12f705ab6c6dfaf8ad736a484ca654a86106 |
||
|
Jay Huh
|
52816ff64d |
Close DB option in WaitForCompact() (#11497)
Summary: Context: As mentioned in https://github.com/facebook/rocksdb/issues/11436, introducing `close_db` option in `WaitForCompactOptions` to close DB after waiting for compactions to finish. Must be set to true to close the DB upon compactions finishing. 1. `bool close_db = false` added to `WaitForCompactOptions` 2. Introduced `CancelPeriodicTaskSchedulers()` and moved unregistering PeriodicTaskSchedulers to it.`CancelAllBackgroundWork()` calls it now. 3. When close_db option is on, unpersisted data (data in memtable when WAL is disabled) will be flushed in `WaitForCompact()` if flush option is not on (and `mutable_db_options_.avoid_flush_during_shutdown` is not true). The unpersisted data flush in `CancelAllBackgroundWork()` will be skipped because `shutting_down_` flag will be set true before calling `Close()`. 4. Atomic boolean `reject_new_background_jobs_` is introduced to prevent new background jobs from being added during the short period of time after waiting is done and before `shutting_down_` is set by `Close()`. 5. `WaitForCompact()` now waits for recovery in progress to complete as well. (flush operations from WAL -> L0 files) 6. Added `close_db_` cases to all existing `WaitForCompactTests` 7. Added a scenario to `DBBasicTest::DBClose` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11497 Test Plan: - Existing DBCompactionTests - `WaitForCompactWithOptionToFlushAndCloseDB` added - Added a scenario to `DBBasicTest::DBClose` Reviewed By: pdillinger, jowlyzhang Differential Revision: D46337560 Pulled By: jaykorean fbshipit-source-id: 0f8c7ee09394847f2af5ea4bdd331b47bcdef0b0 |
||
|
Changyu Bi
|
6a0f637633 |
Compare the number of input keys and processed keys for compactions (#11571)
Summary: ... to improve data integrity validation during compaction. A new option `compaction_verify_record_count` is introduced for this verification and is enabled by default. One exception when the verification is not done is when a compaction filter returns kRemoveAndSkipUntil which can cause CompactionIterator to seek until some key and hence not able to keep track of the number of keys processed. For expected number of input keys, we sum over the number of total keys - number of range tombstones across compaction input files (`CompactionJob::UpdateCompactionStats()`). Table properties are consulted if `FileMetaData` is not initialized for some input file. Since table properties for all input files were also constructed during `DBImpl::NotifyOnCompactionBegin()`, `Compaction::GetTableProperties()` is introduced to reduce duplicated code. For actual number of keys processed, each subcompaction will record its number of keys processed to `sub_compact->compaction_job_stats.num_input_records` and aggregated when all subcompactions finish (`CompactionJob::AggregateCompactionStats()`). In the case when some subcompaction encountered kRemoveAndSkipUntil from compaction filter and does not have accurate count, it propagates this information through `sub_compact->compaction_job_stats.has_num_input_records`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11571 Test Plan: * Add a new unit test `DBCompactionTest.VerifyRecordCount` for the corruption case. * All other unit tests for non-corrupted case. * Ran crash test for a few hours: `python3 ./tools/db_crashtest.py whitebox --simple` Reviewed By: ajkr Differential Revision: D47131965 Pulled By: cbi42 fbshipit-source-id: cc8e94565dd526c4347e9d3843ecf32f6727af92 |
||
|
Yu Zhang
|
4ea7b796b7 |
Respect cutoff timestamp during flush (#11599)
Summary: Make flush respect the cutoff timestamp `full_history_ts_low` as much as possible for the user-defined timestamps in Memtables only feature. We achieve this by not proceeding with the actual flushing but instead reschedule the same `FlushRequest` so a follow up flush job can continue with the check after some interval. This approach doesn't work well for atomic flush, so this feature currently is not supported in combination with atomic flush. Furthermore, this approach also requires a customized method to get the next immediately bigger user-defined timestamp. So currently it's limited to comparator that use uint64_t as the user-defined timestamp format. This support can be extended when we add such a customized method to `AdvancedColumnFamilyOptions`. For non atomic flush request, at any single time, a column family can only have as many as one FlushRequest for it in the `flush_queue_`. There is deduplication done at `FlushRequest` enqueueing(`SchedulePendingFlush`) and dequeueing time (`PopFirstFromFlushQueue`). We hold the db mutex between when a `FlushRequest` is popped from the queue and the same FlushRequest get rescheduled, so no other `FlushRequest` with a higher `max_memtable_id` can be added to the `flush_queue_` blocking us from re-enqueueing the same `FlushRequest`. Flush is continued nevertheless if there is risk of entering write stall mode had the flush being postponed, e.g. due to accumulation of write buffers, exceeding the `max_write_buffer_number` setting. When this happens, the newest user-defined timestamp in the involved Memtables need to be tracked and we use it to increase the `full_history_ts_low`, which is an inclusive cutoff timestamp for which RocksDB promises to keep all user-defined timestamps equal to and newer than it. Tet plan: ``` ./column_family_test --gtest_filter="*RetainUDT*" ./memtable_list_test --gtest_filter="*WithTimestamp*" ./flush_job_test --gtest_filter="*WithTimestamp*" ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11599 Reviewed By: ajkr Differential Revision: D47561586 Pulled By: jowlyzhang fbshipit-source-id: 9400445f983dd6eac489e9dd0fb5d9b99637fe89 |
||
|
shuzz
|
2f712235ab |
optimized code (#11614)
Summary: improvement code by std::move and c++17 Pull Request resolved: https://github.com/facebook/rocksdb/pull/11614 Reviewed By: ajkr Differential Revision: D47599519 Pulled By: jowlyzhang fbshipit-source-id: 6b897876f4e87e94a74c53d8db2a01303d500bff |
||
|
Yu Zhang
|
7521478b43 |
Record the persist_user_defined_timestamps flag in manifest (#11515)
Summary: Start to record the value of the flag `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` in the Manifest and table properties for a SST file when it is created. And use the recorded flag when creating a table reader for the SST file. This flag's default value is true, it is only explicitly recorded if it's false. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11515 Test Plan: ``` make all check ./version_edit_test ``` Reviewed By: ltamasi Differential Revision: D46920386 Pulled By: jowlyzhang fbshipit-source-id: 075c20363d3d2cc1368422ecc805617ed135cc26 |
||
|
Changyu Bi
|
15e8a843d9 |
Do not include last level in compaction when allow_ingest_behind=true (#11489)
Summary: when a DB is configured with `allow_ingest_behind = true`, the last level should be reserved for ingested files and these files should not be included in any compaction. Currently, a major compaction can compact these files to smaller levels. This can cause future files to be rejected for ingest behind (see `ExternalSstFileIngestionJob::CheckLevelForIngestedBehindFile()`). This PR fixes the issue such that files in the last level is not included in any compaction. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11489 Test Plan: * Updated unit test `ExternalSSTFileTest.IngestBehind` to test that last level is not included in manual and auto-compaction. Reviewed By: ajkr Differential Revision: D46455711 Pulled By: cbi42 fbshipit-source-id: 5e2142c2a709ef932ad797897795021c06c4ac8c |
||
|
Changyu Bi
|
e95cc1217d |
CompactRange() always compacts to bottommost level for leveled compaction (#11468)
Summary:
currently for leveled compaction, the max output level of a call to `CompactRange()` is pre-computed before compacting each level. This max output level is the max level whose key range overlaps with the manual compaction key range. However, during manual compaction, files in the max output level may be compacted down further by some background compaction. When this background compaction is a trivial move, there is a race condition and the manual compaction may not be able to compact all keys in the specified key range. This PR updates `CompactRange()` to always compact to the bottommost level to make this race condition more unlikely (it can still happen, see more in comment here:
|
||
|
Jay Huh
|
87bc929db3 |
Flush option in WaitForCompact() (#11483)
Summary: Context: As mentioned in https://github.com/facebook/rocksdb/issues/11436, introducing `flush` option in `WaitForCompactOptions` to flush before waiting for compactions to finish. Must be set to true to ensure no immediate compactions (except perhaps periodic compactions) after closing and re-opening the DB. 1. `bool flush = false` added to `WaitForCompactOptions` 2. `DBImpl::FlushAllColumnFamilies()` is introduced and `DBImpl::FlushForGetLiveFiles()` is refactored to call it. 3. `DBImpl::FlushAllColumnFamilies()` gets called before waiting in `WaitForCompact()` if `flush` option is `true` 4. Some previous WaitForCompact tests were parameterized to include both cases for `abort_on_pause_` being true/false as well as `flush_` being true/false Pull Request resolved: https://github.com/facebook/rocksdb/pull/11483 Test Plan: - `DBCompactionTest::WaitForCompactWithOptionToFlush` added - Changed existing DBCompactionTest::WaitForCompact tests to `DBCompactionWaitForCompactTest` to include params Reviewed By: pdillinger Differential Revision: D46289770 Pulled By: jaykorean fbshipit-source-id: 70d3f461d96a6e06390be60170dd7c4d0d38f8b0 |
||
|
Jay Huh
|
81aeb15988 |
Add WaitForCompact with WaitForCompactOptions to public API (#11436)
Summary: Context: This is the first PR for WaitForCompact() Implementation with WaitForCompactOptions. In this PR, we are introducing `Status WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` in the public API. This currently utilizes the existing internal `WaitForCompact()` implementation (with default abort_on_pause = false). `abort_on_pause` has been moved to `WaitForCompactOptions&`. In the later PRs, we will introduce the following two options in `WaitForCompactOptions` 1. `bool flush = false` by default - If true, flush before waiting for compactions to finish. Must be set to true to ensure no immediate compactions (except perhaps periodic compactions) after closing and re-opening the DB. 2. `bool close_db = false` by default - If true, will also close the DB upon compactions finishing. 1. struct `WaitForCompactOptions` added to options.h and `abort_on_pause` in the internal API moved to the option struct. 2. `Status WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` introduced in `db.h` 3. Changed the internal WaitForCompact() to `WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` and checks for the `abort_on_pause` inside the option. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11436 Test Plan: Following tests added - `DBCompactionTest::WaitForCompactWaitsOnCompactionToFinish` - `DBCompactionTest::WaitForCompactAbortOnPauseAborted` - `DBCompactionTest::WaitForCompactContinueAfterPauseNotAborted` - `DBCompactionTest::WaitForCompactShutdownWhileWaiting` - `TransactionTest::WaitForCompactAbortOnPause` NOTE: `TransactionTest::WaitForCompactAbortOnPause` was added to use `StackableDB` to ensure the wrapper function is in place. Reviewed By: pdillinger Differential Revision: D45799659 Pulled By: jaykorean fbshipit-source-id: b5b58f95957f2ab47d1221dee32a61d6cdc4685b |
||
|
Jay Huh
|
586d78b31e |
Remove wait_unscheduled from waitForCompact internal API (#11443)
Summary: Context: In pull request https://github.com/facebook/rocksdb/issues/11436, we are introducing a new public API `waitForCompact(const WaitForCompactOptions& wait_for_compact_options)`. This API invokes the internal implementation `waitForCompact(bool wait_unscheduled=false)`. The unscheduled parameter indicates the compactions that are not yet scheduled but are required to process items in the queue. In certain cases, we are unable to wait for compactions, such as during a shutdown or when background jobs are paused. It is important to return the appropriate status in these scenarios. For all other cases, we should wait for all compaction and flush jobs, including the unscheduled ones. The primary purpose of this new API is to wait until the system has resolved its compaction debt. Currently, the usage of `wait_unscheduled` is limited to test code. This pull request eliminates the usage of wait_unscheduled. The internal `waitForCompact()` API now waits for unscheduled compactions unless the db is undergoing a shutdown. In the event of a shutdown, the API returns `Status::ShutdownInProgress()`. Additionally, a new parameter, `abort_on_pause`, has been introduced with a default value of `false`. This parameter addresses the possibility of waiting indefinitely for unscheduled jobs if `PauseBackgroundWork()` was called before `waitForCompact()` is invoked. By setting `abort_on_pause` to `true`, the API will immediately return `Status::Aborted`. Furthermore, all tests that previously called `waitForCompact(true)` have been fixed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11443 Test Plan: Existing tests that involve a shutdown in progress: - DBCompactionTest::CompactRangeShutdownWhileDelayed - DBTestWithParam::PreShutdownMultipleCompaction - DBTestWithParam::PreShutdownCompactionMiddle Reviewed By: pdillinger Differential Revision: D45923426 Pulled By: jaykorean fbshipit-source-id: 7dc93fe6a6841a7d9d2d72866fa647090dba8eae |
||
|
akankshamahajan
|
6ba4717f35 |
Fix build error: variable 'base_level' may be uninitialized (#11435)
Summary:
Fix build error: variable 'base_level' may be uninitialized
```
db_impl_compaction_flush.cc:1195:21: error: variable 'base_level' may be uninitialized when used here [-Werror,-Wconditional-uninitialized]
level = base_level;
```
^~~~~~~~~~
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11435
Test Plan: CircleCI jobs
Reviewed By: cbi42
Differential Revision: D45708176
Pulled By: akankshamahajan15
fbshipit-source-id: 851b1205b22b63d728495e5735fa91b0ad8e012b
|
||
|
Hui Xiao
|
8f763bdeab |
Record and use the tail size to prefetch table tail (#11406)
Summary: **Context:** We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics. **Summary:** - Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()` - For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more. - Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest). Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406 Test Plan: 1. New UT 2. db bench Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison. ``` diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc index bd5669f0f..791484c1f 100644 --- a/table/block_based/block_based_table_reader.cc +++ b/table/block_based/block_based_table_reader.cc @@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail( &tail_prefetch_size); // Try file system prefetch - if (!file->use_direct_io() && !force_direct_prefetch) { + if (false && !file->use_direct_io() && !force_direct_prefetch) { if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority) .IsNotSupported()) { prefetch_buffer->reset(new FilePrefetchBuffer( diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc index ea40f5fa0..39a0ac385 100644 --- a/tools/db_bench_tool.cc +++ b/tools/db_bench_tool.cc @@ -4191,6 +4191,8 @@ class Benchmark { std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options)); } else { BlockBasedTableOptions block_based_options; + block_based_options.metadata_cache_options.partition_pinning = + PinningTier::kAll; block_based_options.checksum = static_cast<ChecksumType>(FLAGS_checksum_type); if (FLAGS_use_hash_search) { ``` Create DB ``` ./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none ``` ReadRandom ``` ./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none ``` (a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies()) ``` rocksdb.table.open.prefetch.tail.hit COUNT : 3395 rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614 ``` (b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies()) ``` rocksdb.table.open.prefetch.tail.hit COUNT : 14257 rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540 ``` As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR 3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR. Reviewed By: pdillinger Differential Revision: D45413346 Pulled By: hx235 fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064 |
||
|
Changyu Bi
|
a11f1e12ca |
Fix flaky test DBTestUniversalManualCompactionOutputPathId.ManualCompactionOutputPathId (#11412)
Summary: the test is flaky when compiled with `make -j56 COERCE_CONTEXT_SWITCH=1 ./db_universal_compaction_test`. The cause is that a manual compaction `CompactRange()` can finish and return before obsolete files are deleted. One reason for this is that a manual compaction waits until `manual.done` is set here |
||
|
Hui Xiao
|
151242ce46 |
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288)
Summary:
**Context:**
The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them.
**Summary**
- Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros`
- Fixed the default histogram in `RandomAccessFileReader`
- New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader`
- Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288
Test Plan:
- **Stress test**
- **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob)
- May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads.
```
./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10)
```
```
// BlockBasedTable
rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805
rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116
rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689
// PlainTable
Does not apply
```
- **Db bench 2: performance**
**Read**
SETUP: db with 900 files
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none
```run till convergence
```
./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3
```
Pre-change
`readrandom [AVG 60 runs] : 21568 (± 248) ops/sec`
Post-change (no regression, -0.3%)
`readrandom [AVG 60 runs] : 21486 (± 236) ops/sec`
**Compaction/Flush**run till convergence
```
./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none
rocksdb.sst.read.micros COUNT : 33820
rocksdb.sst.read.flush.micros COUNT : 1800
rocksdb.sst.read.compaction.micros COUNT : 32020
```
Pre-change
`fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec`
Post-change (no regression, ~-0.4%)
`fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec`
Reviewed By: ajkr
Differential Revision: D44007011
Pulled By: hx235
fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
|
||
|
Changyu Bi
|
43e9a60bb2 |
Always allow L0->L1 trivial move during manual compaction (#11375)
Summary: during manual compaction (CompactRange()), L0->L1 trivial move is disabled when only L0 overlaps with compacting key range (introduced in https://github.com/facebook/rocksdb/issues/7368 to enforce kForce* contract). This can cause large memory usage due to compaction readahead when number of L0 files is large. This PR allows L0->L1 trivial move in this case, and will do a L1 -> L1 intra-level compaction when needed (`bottommost_level_compaction` is kForce*). In brief, consider a DB with only L0 file, and user calls CompactRange(kForce, nullptr, nullptr), - before this PR, RocksDB does a L0 -> L1 compaction (disallow trivial move), - after this PR, RocksDB does a L0 -> L1 compaction (allow trivial move), and a L1 -> L1 compaction. Users can use kForceOptimized to avoid this extra L1->L1 compaction overhead when L0s are overlapping and cannot be trivial moved. This PR also fixed a bug (see previous discussion in https://github.com/facebook/rocksdb/issues/11041) where `final_output_level` of a manual compaction can be miscalculated when `level_compaction_dynamic_level_bytes=true`. This bug could cause incorrect level being moved when CompactRangeOptions::change_level is specified. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11375 Test Plan: - Added new unit tests to test that L0 -> L1 compaction allows trivial move and L1 -> L1 compaction is done when needed. Reviewed By: ajkr Differential Revision: D44943518 Pulled By: cbi42 fbshipit-source-id: e9fb770d17b163c18a623e1d1bd6b81159192708 |
||
|
Hui Xiao
|
11cb6af6e5 |
Fix bug of prematurely excluded CF in atomic flush contains unflushed data that should've been included in the atomic flush (#11148)
Summary:
**Context:**
Atomic flush should guarantee recoverability of all data of seqno up to the max seqno of the flush. It achieves this by ensuring all such data are flushed by the time this atomic flush finishes through `SelectColumnFamiliesForAtomicFlush()`. However, our crash test exposed the following case where an excluded CF from an atomic flush contains unflushed data of seqno less than the max seqno of that atomic flush and loses its data with `WriteOptions::DisableWAL=true` in face of a crash right after the atomic flush finishes .
```
./db_stress --preserve_unverified_changes=1 --reopen=0 --acquire_snapshot_one_in=0 --adaptive_readahead=1 --allow_data_in_errors=True --async_io=1 --atomic_flush=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=15 --bottommost_compression_type=none --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=134217727 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=lz4hc --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --expected_values_dir=$exp --fail_if_options_file_error=0 --fifo_allow_compaction=0 --file_checksum_impl=none --flush_one_in=0 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=100 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=2 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --long_running_snapshots=1 --manual_wal_flush_one_in=100 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=4 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=0 --periodic_compaction_seconds=100 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=32 --readahead_size=16384 --readpercent=50 --recycle_log_file_num=0 --ribbon_starting_level=6 --secondary_cache_fault_one_in=0 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=10 --subcompactions=1 --sync=0 --sync_fault_injection=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 --use_multiget=1 --use_put_entity_one_in=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=0 --verify_db_one_in=1000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=none --write_buffer_size=524288 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=30 &
pid=$!
sleep 0.2
sleep 10
kill $pid
sleep 0.2
./db_stress --ops_per_thread=1 --preserve_unverified_changes=1 --reopen=0 --acquire_snapshot_one_in=0 --adaptive_readahead=1 --allow_data_in_errors=True --async_io=1 --atomic_flush=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=15 --bottommost_compression_type=none --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=134217727 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=lz4hc --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --expected_values_dir=$exp --fail_if_options_file_error=0 --fifo_allow_compaction=0 --file_checksum_impl=none --flush_one_in=0 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=100 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=2 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --long_running_snapshots=1 --manual_wal_flush_one_in=100 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=4 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=0 --periodic_compaction_seconds=100 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=32 --readahead_size=16384 --readpercent=50 --recycle_log_file_num=0 --ribbon_starting_level=6 --secondary_cache_fault_one_in=0 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=10 --subcompactions=1 --sync=0 --sync_fault_injection=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 --use_multiget=1 --use_put_entity_one_in=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=0 --verify_db_one_in=1000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=none --write_buffer_size=524288 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=30 &
pid=$!
sleep 0.2
sleep 40
kill $pid
sleep 0.2
Verification failed for column family 6 key 0000000000000239000000000000012B0000000000000138 (56622): value_from_db: , value_from_expected: 4A6331754E4F4C4D42434041464744455A5B58595E5F5C5D5253505156575455, msg: Value not found: NotFound:
Crash-recovery verification failed :(
No writes or ops?
Verification failed :(
```
The bug is due to the following:
- When atomic flush is used, an empty CF is legally [excluded](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_filesnapshot.cc#L39) in `SelectColumnFamiliesForAtomicFlush` as the first step of `DBImpl::FlushForGetLiveFiles` before [passing](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_filesnapshot.cc#L42) the included CFDs to `AtomicFlushMemTables`.
- But [later](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_impl/db_impl_compaction_flush.cc#L2133) in `AtomicFlushMemTables`, `WaitUntilFlushWouldNotStallWrites` will [release the db mutex](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_impl/db_impl_compaction_flush.cc#L2403), during which data@seqno N can be inserted into the excluded CF and data@seqno M can be inserted into one of the included CFs, where M > N.
- However, data@seqno N in an already-excluded CF is thus excluded from this atomic flush while we seqno N is less than seqno M.
**Summary:**
- Replace `SelectColumnFamiliesForAtomicFlush()`-before-`AtomicFlushMemTables()` with `SelectColumnFamiliesForAtomicFlush()`-after-wait-within-`AtomicFlushMemTables()` so we ensure no write affecting the recoverability of this atomic job (i.e, change to max seqno of this atomic flush or insertion of data with less seqno than the max seqno of the atomic flush to excluded CF) can happen after calling `SelectColumnFamiliesForAtomicFlush()`.
- For above, refactored and clarified comments on `SelectColumnFamiliesForAtomicFlush()` and `AtomicFlushMemTables()` for clearer semantics of passed-in CFDs to atomic-flush
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11148
Test Plan:
- New unit test failed before the fix and passes after
- Make check
- Rehearsal stress test
Reviewed By: ajkr
Differential Revision: D42799871
Pulled By: hx235
fbshipit-source-id: 13636b63e9c25c5895857afc36ea580d57f6d644
|
||
|
ywave
|
9fa9becf53 |
fix -Wrange-loop-analysis in Apple clang version 12.0.0 (clang-1200.0.32.29) (#11240)
Summary:
Fix complain
```
db/db_impl/db_impl_compaction_flush.cc:417:19: error: loop variable 'bg_flush_arg' of type 'const rocksdb::DBImpl::BGFlushArg' creates a copy from type
'const rocksdb::DBImpl::BGFlushArg' [-Werror,-Wrange-loop-analysis]
for (const auto bg_flush_arg : bg_flush_args) {
^
db/db_impl/db_impl_compaction_flush.cc:417:8: note: use reference type 'const rocksdb::DBImpl::BGFlushArg &' to prevent copying
for (const auto bg_flush_arg : bg_flush_args) {
^~~~~~~~~~~~~~~~~~~~~~~~~
&
db/db_impl/db_impl_compaction_flush.cc:2911:21: error: loop variable 'bg_flush_arg' of type 'const rocksdb::DBImpl::BGFlushArg' creates a copy from type
'const rocksdb::DBImpl::BGFlushArg' [-Werror,-Wrange-loop-analysis]
for (const auto bg_flush_arg : bg_flush_args) {
^
db/db_impl/db_impl_compaction_flush.cc:2911:10: note: use reference type 'const rocksdb::DBImpl::BGFlushArg &' to prevent copying
for (const auto bg_flush_arg : bg_flush_args) {
^~~~~~~~~~~~~~~~~~~~~~~~~
&
```
from
```sh
xxx@MacBook-Pro / % g++ -v
Configured with: --prefix=/Library/Developer/CommandLineTools/usr --with-gxx-include-dir=/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/c++/4.2.1
Apple clang version 12.0.0 (clang-1200.0.32.29)
Target: x86_64-apple-darwin21.6.0
Thread model: posix
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11240
Reviewed By: cbi42
Differential Revision: D43458729
Pulled By: ajkr
fbshipit-source-id: 26e110f83451509463a1bc308f737ccb693c9f45
|
||
|
Andrew Kryczka
|
071c33846d |
Allow canceling manual compaction while waiting for conflicting compaction (#11165)
Summary: This PR adds logic to the `RunManualCompaction()` loop to check for cancellation before waiting on any conflicting compactions to finish. In case of cancellation, `RunManualCompaction()` no longer waits on conflicting compactions Pull Request resolved: https://github.com/facebook/rocksdb/pull/11165 Test Plan: repro test case Reviewed By: cbi42 Differential Revision: D42864058 Pulled By: ajkr fbshipit-source-id: ea4dd1a8f294abe212905495a8fbe8f07fca3f5a |
||
|
sdong
|
4720ba4391 |
Remove RocksDB LITE (#11147)
Summary: We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support. Most of changes were done through following comments: unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'` by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147 Test Plan: See CI Reviewed By: pdillinger Differential Revision: D42796341 fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2 |
||
|
Hui Xiao
|
86fa2592be |
Fix data race on ColumnFamilyData::flush_reason by letting FlushRequest/Job owns flush_reason instead of CFD (#11111)
Summary: **Context:** Concurrent flushes on the same CF can set on `ColumnFamilyData::flush_reason` before each other flush finishes. An symptom is one CF has different flush_reason with others though all of them are in an atomic flush `db_stress: db/db_impl/db_impl_compaction_flush.cc:423: rocksdb::Status rocksdb::DBImpl::AtomicFlushMemTablesToOutputFiles(const rocksdb::autovector<rocksdb::DBImpl::BGFlushArg>&, bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::Env::Priority): Assertion cfd->GetFlushReason() == cfds[0]->GetFlushReason() failed. ` **Summary:** Suggested by ltamasi, we now refactor and let FlushRequest/Job to own flush_reason as there is no good way to define `ColumnFamilyData::flush_reason` in face of concurrent flushes on the same CF (which wasn't the case a long time ago when `ColumnFamilyData::flush_reason ` first introduced`) **Tets:** - new unit test - make check - aggressive crash test rehearsal Pull Request resolved: https://github.com/facebook/rocksdb/pull/11111 Reviewed By: ajkr Differential Revision: D42644600 Pulled By: hx235 fbshipit-source-id: 8589c8184869d3415e5b780c887f877818a5ebaf |
||
|
ywave
|
7f71880de9 |
Fix typo in flushing stats CF (#11055)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/11055 Test Plan: make check Reviewed By: cbi42 Differential Revision: D42232828 Pulled By: ajkr fbshipit-source-id: 3b46514aebff4da7e47b9954b90800ba4a3ba30b |
||
|
Hui Xiao
|
9502856edd |
Add missing range conflict check between file ingestion and RefitLevel() (#10988)
Summary: **Context:** File ingestion never checks whether the key range it acts on overlaps with an ongoing RefitLevel() (used in `CompactRange()` with `change_level=true`). That's because RefitLevel() doesn't register and make its key range known to file ingestion. Though it checks overlapping with other compactions by https://github.com/facebook/rocksdb/blob/7.8.fb/db/external_sst_file_ingestion_job.cc#L998. RefitLevel() (used in `CompactRange()` with `change_level=true`) doesn't check whether the key range it acts on overlaps with an ongoing file ingestion. That's because file ingestion does not register and make its key range known to other compactions. - Note that non-refitlevel-compaction (e.g, manual compaction w/o RefitLevel() or general compaction) also does not check key range overlap with ongoing file ingestion for the same reason. - But it's fine. Credited to cbi42's discovery, `WaitForIngestFile` was called by background and foreground compactions. They were introduced in |
||
|
Changyu Bi
|
cc6f323705 |
Include estimated bytes deleted by range tombstones in compensated file size (#10734)
Summary: compensate file sizes in compaction picking so files with range tombstones are preferred, such that they get compacted down earlier as they tend to delete a lot of data. This PR adds a `compensated_range_deletion_size` field in FileMeta that is computed during Flush/Compaction and persisted in MANIFEST. This value is added to `compensated_file_size` which will be used for compaction picking. Currently, for a file in level L, `compensated_range_deletion_size` is set to the estimated bytes deleted by range tombstone of this file in all levels > L. This helps to reduce space amp when data in older levels are covered by range tombstones in level L. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10734 Test Plan: - Added unit tests. - benchmark to check if the above definition `compensated_range_deletion_size` is reducing space amp as intended, without affecting write amp too much. The experiment set up favorable for this optimization: large range tombstone issued infrequently. Command used: ``` ./db_bench -benchmarks=fillrandom,waitforcompaction,stats,levelstats -use_existing_db=false -avoid_flush_during_recovery=true -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -max_bytes_for_level_base=134217728 -target_file_size_base=33554432 -writes_per_range_tombstone=500000 -range_tombstone_width=5000000 -num=50000000 -benchmark_write_rate_limit=8388608 -threads=16 -duration=1800 --max_num_range_tombstones=1000000000 ``` In this experiment, each thread wrote 16 range tombstones over the duration of 30 minutes, each range tombstone has width 5M that is the 10% of the key space width. Results shows this PR generates a smaller DB size. Compaction stats from this PR: ``` Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 2/0 31.54 MB 0.5 0.0 0.0 0.0 8.4 8.4 0.0 1.0 0.0 63.4 135.56 110.94 544 0.249 0 0 0.0 0.0 L4 3/0 96.55 MB 0.8 18.5 6.7 11.8 18.4 6.6 0.0 2.7 65.3 64.9 290.08 284.03 108 2.686 284M 1957K 0.0 0.0 L5 15/0 404.41 MB 1.0 19.1 7.7 11.4 18.8 7.4 0.3 2.5 66.6 65.7 292.93 285.34 220 1.332 293M 3808K 0.0 0.0 L6 143/0 4.12 GB 0.0 45.0 7.5 37.5 41.6 4.1 0.0 5.5 71.2 65.9 647.00 632.66 251 2.578 739M 47M 0.0 0.0 Sum 163/0 4.64 GB 0.0 82.6 21.9 60.7 87.2 26.5 0.3 10.4 61.9 65.4 1365.58 1312.97 1123 1.216 1318M 52M 0.0 0.0 ``` Compaction stats from main: ``` Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 0/0 0.00 KB 0.0 0.0 0.0 0.0 8.4 8.4 0.0 1.0 0.0 60.5 142.12 115.89 569 0.250 0 0 0.0 0.0 L4 3/0 85.68 MB 1.0 17.7 6.8 10.9 17.6 6.7 0.0 2.6 62.7 62.3 289.05 281.79 112 2.581 272M 2309K 0.0 0.0 L5 11/0 293.73 MB 1.0 18.8 7.5 11.2 18.5 7.2 0.5 2.5 64.9 63.9 296.07 288.50 220 1.346 288M 4365K 0.0 0.0 L6 130/0 3.94 GB 0.0 51.5 7.6 43.9 47.9 3.9 0.0 6.3 67.2 62.4 784.95 765.92 258 3.042 848M 51M 0.0 0.0 Sum 144/0 4.31 GB 0.0 88.0 21.9 66.0 92.3 26.3 0.5 11.0 59.6 62.5 1512.19 1452.09 1159 1.305 1409M 58M 0.0 0.0``` Reviewed By: ajkr Differential Revision: D39834713 Pulled By: cbi42 fbshipit-source-id: fe9341040b8704a8fbb10cad5cf5c43e962c7e6b |