Summary:
* Largely based on https://github.com/facebook/rocksdb/issues/12085 but grouped into one large workflow because of bad GHA UI design (see comments).
* Windows job details consolidated into an action file so that those jobs can easily move between per-pr-push and nightly.
* Simplify some handling of "CIRCLECI" environment and add "GITHUB_ACTIONS" in the same places
* For jobs that we want to go in pr-jobs or nightly there are disabled "candidate" workflows with draft versions of those jobs.
* ARM jobs are disabled waiting on full GHA support.
* build-linux-java-static needed some special attention to work, due to GLIBC compatibility issues (see comments).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12163
Test Plan:
Nightly jobs can be seen passing between these two links:
https://github.com/facebook/rocksdb/actions/runs/7266835435/job/19799390061?pr=12163https://github.com/facebook/rocksdb/actions/runs/7269697823/job/19807724471?pr=12163
And per-PR jobs of course passing on this PR.
Reviewed By: hx235
Differential Revision: D52335810
Pulled By: pdillinger
fbshipit-source-id: bbb95196f33eabad8cddf3c6b52f4413c80e034d
Summary:
Having a synthetic implementation of `TimedWait()` in `SystemClock` will allow us to add `SyncPoint`s while mutex is released, which was previously impossible since the lock was released and reacquired all within `pthread_cond_timedwait()`. Additionally, integrating `TimedWait()` with `MockSystemClock` allows us to cleanup some workarounds in the test code. In this PR I only cleaned up the `GenericRateLimiter` test workaround.
This is related to the intended follow-up mentioned in https://github.com/facebook/rocksdb/issues/7101's description. There are a couple differences:
(1) This PR does not include removing the particular workaround that initially motivated it. Actually, the `Timer` class uses `InstrumentedCondVar`, so the interface introduced here is inadequate to remove that workaround. On the bright side, the interface introduced in this PR can be changed as needed since it can neither be used nor extended externally, due to using forward-declared `port::CondVar*` in the interface.
(2) This PR only makes the change in `SystemClock` not `Env`. Older revisions of this PR included `Env::TimedWait()` and `SpecialEnv::TimedWait()`; however, since they were unused it probably makes sense to defer adding them until when they are needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11753
Reviewed By: pdillinger
Differential Revision: D48654995
Pulled By: ajkr
fbshipit-source-id: 15e19f2454b64d4ec7f50e328691c66ca9911122
Summary:
In IDE navigation I find it annoying that there are two statistics.h files (etc.) and often land on the wrong one. Here I migrate several headers to use the blah.h <- blah_impl.h <- blah.cc idiom. Although clang-format wants "blah.h" to be the top include for "blah.cc", I think overall this is an improvement.
No public API changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11408
Test Plan: existing tests
Reviewed By: ltamasi
Differential Revision: D45456696
Pulled By: pdillinger
fbshipit-source-id: 809d931253f3272c908cf5facf7e1d32fc507373
Summary:
Context:
This pull request update is in response to a comment made on https://github.com/facebook/rocksdb/pull/8596#discussion_r680264932. The current implementation of RefillBytesAndGrantRequestsLocked() drains all available_bytes, but the first request after the last wave of requesting/bytes granting is done is not being handled in the same way.
This creates a scenario where if a request for a large amount of bytes is enqueued first, but there are not enough available_bytes to fulfill it, the request is put to sleep until the next refill time. Meanwhile, a later request for a smaller number of bytes comes in and is granted immediately. This behavior is not fair as the earlier request was made first.
To address this issue, we have made changes to the code to exhaust the remaining available bytes from the request and queue the remaining. With this change, requests are granted in the order they are received, ensuring that earlier requests are not unfairly delayed by later, smaller requests. The specific scenario described above will no longer occur with this change. Also consolidated `granted` and `request_bytes` as part of the change since `granted` is equivalent to `request_bytes == 0`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11425
Test Plan: Added `AvailableByteSizeExhaustTest`
Reviewed By: hx235
Differential Revision: D45570711
Pulled By: jaykorean
fbshipit-source-id: a7117ed17bf4b8a7ae0f76124cb41902db1a2592
Summary:
Instead of existing calls to ps from gnu_parallel, call a new wrapper that does ps, looks for unit test like processes, and uses pstack or gdb to print thread stack traces. Also, using `ps -wwf` instead of `ps -wf` ensures output is not cut off.
For security, CircleCI runs with security restrictions on ptrace (/proc/sys/kernel/yama/ptrace_scope = 1), and this change adds a work-around to `InstallStackTraceHandler()` (only used by testing tools) to allow any process from the same user to debug it. (I've also touched >100 files to ensure all the unit tests call this function.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10828
Test Plan: local manual + temporary infinite loop in a unit test to observe in CircleCI
Reviewed By: hx235
Differential Revision: D40447634
Pulled By: pdillinger
fbshipit-source-id: 718a4c4a5b54fa0f9af2d01a446162b45e5e84e1
Summary:
Travis CI is depreciated and haven't been maintained for some time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10407
Reviewed By: ajkr
Differential Revision: D38078382
Pulled By: jay-zhuang
fbshipit-source-id: f42057f2f41f722bdce56bf195f67a94835191fb
Summary:
Made locking strict for all accesses of `GenericRateLimiter` internal state.
`SetBytesPerSecond()` was the main problem since it had no locking, while the two updates it makes need to be done as one atomic operation.
The test case, "ConfigOptionsTest.ConfiguringOptionsDoesNotRevertRateLimiterBandwidth", is for the issue fixed in https://github.com/facebook/rocksdb/issues/10378, but I forgot to include the test there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10374
Reviewed By: pdillinger
Differential Revision: D37906367
Pulled By: ajkr
fbshipit-source-id: ccde620d2a7f96d1401bdafd2bdb685cbefbafa5
Summary:
(PR created for informational/testing purposes only.)
- Fixes lost dynamic updates to GenericRateLimiter bandwidth using `SetBytesPerSecond()`
- Benefit over #10374 is eliminating race conditions with Configurable framework.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10378
Reviewed By: pdillinger
Differential Revision: D37914865
fbshipit-source-id: d4f566d60ec9726d26932388c61671adf0ee0f30
Summary:
Right now we still don't fully use std::numeric_limits but use a macro, mainly for supporting VS 2013. Right now we only support VS 2017 and up so it is not a problem. The code comment claims that MinGW still needs it. We don't have a CI running MinGW so it's hard to validate. since we now require C++17, it's hard to imagine MinGW would still build RocksDB but doesn't support std::numeric_limits<>.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9954
Test Plan: See CI Runs.
Reviewed By: riversand963
Differential Revision: D36173954
fbshipit-source-id: a35a73af17cdcae20e258cdef57fcf29a50b49e0
Summary:
Context:
After more discussion, a fix in https://github.com/facebook/rocksdb/issues/8938 might turn out to be too restrictive for the case where `GetTotalPendingRequests` might be invoked on RateLimiter classes that does not support the recently added API `RateLimiter::GetTotalPendingRequests` (https://github.com/facebook/rocksdb/issues/8890) due to the `assert(false)` in https://github.com/facebook/rocksdb/issues/8938. Furthermore, sentinel value like `-1` proposed in https://github.com/facebook/rocksdb/issues/8938 is easy to be ignored and unchecked. Therefore we decided to adopt `Status::NotSupported()`, which is also a convention of adding new API to public header in RocksDB.
- Changed return value type of `RateLimiter::GetTotalPendingRequests` in related declaration/definition
- Passed in pointer argument to hold the output instead of returning it as before
- Adapted to the changes above in calling `RateLimiter::GetTotalPendingRequests` in test
- Minor improvement to `TEST_F(RateLimiterTest, GetTotalPendingRequests)`: added failure message for assertion and replaced repetitive statements with a loop
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8950
Reviewed By: ajkr, pdillinger
Differential Revision: D31128450
Pulled By: hx235
fbshipit-source-id: 282ac9c4f3dacaa0aec6d0a993161f77ad47a040
Summary:
- Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes.
- The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion.
- Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134)
- Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage
- This increased the running time of the three tests, see test plan for time difference running locally
- Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279)
- It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op.
- This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion.
- Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness
- Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904
Test Plan:
- Passing existing tests
- To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds.
- Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path".
- current (run on branch rate_limiter_ut_improve locally)
[ RUN ] RateLimiterTest.GetTotalBytesThrough
[ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms)
[ RUN ] RateLimiterTest.GetTotalRequests
[ OK ] RateLimiterTest.GetTotalRequests (3001 ms)
[ RUN ] RateLimiterTest.GetTotalPendingRequests
[ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms)
...
[----------] 10 tests from RateLimiterTest (43349 ms total)
[----------] Global test environment tear-down
[==========] 10 tests from 1 test case ran. (43349 ms total)
[ PASSED ] 10 tests.
- previous (run on branch main locally)
[ RUN ] RateLimiterTest.GetTotalBytesThrough
[ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms)
[ RUN ] RateLimiterTest.GetTotalRequests
[ OK ] RateLimiterTest.GetTotalRequests (0 ms)
[ RUN ] RateLimiterTest.GetTotalPendingRequests
[ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms)
...
[----------] 10 tests from RateLimiterTest (33848 ms total)
[----------] Global test environment tear-down
[==========] 10 tests from 1 test case ran. (33848 ms total)
[ PASSED ] 10 tests.
Reviewed By: ajkr
Differential Revision: D30872544
Pulled By: hx235
fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
Summary:
Context/Summary:
As users requested, a public API RateLimiter::GetTotalPendingRequests() is added to expose the total number of pending requests for bytes in the rate limiter, which is the size of the request queue of that priority (or of all priorities, if IO_TOTAL is interested) at the time when this API is called.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8890
Test Plan:
- Passing added new unit tests
- Passing existing unit tests
Reviewed By: ajkr
Differential Revision: D30815500
Pulled By: hx235
fbshipit-source-id: 2dfa990f651c1c47378b6215c751ad76a5824300
Summary:
Context:
An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need.
The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER.
Similar benefits exist for IO_MID priority.
- Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331))
- Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor
- Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_
- Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595
Test Plan:
- passed existing rate_limiter_test.cc
- passed added unit tests in rate_limiter_test.cc
- run performance test to verify performance with only high/low requests is not affected by this change
- Set-up command:
`TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))`
- Test command:
`TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'`
- Before (on branch upstream/master):
`rocksdb.compact.write.bytes COUNT : 4014162`
`rocksdb.flush.write.bytes COUNT : 26715832`
rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66
- After (on branch rate_limiter_user_pri):
`rocksdb.compact.write.bytes COUNT : 3807822`
`rocksdb.flush.write.bytes COUNT : 26098659`
rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85
Reviewed By: ajkr
Differential Revision: D30577783
Pulled By: hx235
fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
Summary:
`GenericRateLimiter` slow path handles requests that cannot be satisfied
immediately. Such requests enter a queue, and their thread stays in `Request()`
until they are granted or the rate limiter is stopped. These threads are
responsible for unblocking themselves. The work to do so is split into two main
duties.
(1) Waiting for the next refill time.
(2) Refilling the bytes and granting requests.
Prior to this PR, the slow path logic involved a leader election algorithm to
pick one thread to perform (1) followed by (2). It elected the thread whose
request was at the front of the highest priority non-empty queue since that
request was most likely to be granted. This algorithm was efficient in terms of
reducing intermediate wakeups, which is a thread waking up only to resume
waiting after finding its request is not granted. However, the conceptual
complexity of this algorithm was too high. It took me a long time to draw a
timeline to understand how it works for just one edge case yet there were so
many.
This PR drops the leader election to reduce conceptual complexity. Now, the two
duties can be performed by whichever thread acquires the lock first. The risk
of this change is increasing the number of intermediate wakeups, however, we
took steps to mitigate that.
- `wait_until_refill_pending_` flag ensures only one thread performs (1). This\
prevents the thundering herd problem at the next refill time. The remaining\
threads wait on their condition variable with an unbounded duration -- thus we\
must remember to notify them to ensure forward progress.
- (1) is typically done by a thread at the front of a queue. This is trivial\
when the queues are initially empty as the first choice that arrives must be\
the only entry in its queue. When queues are initially non-empty, we achieve\
this by having (2) notify a thread at the front of a queue (preferring higher\
priority) to perform the next duty.
- We do not require any additional wakeup for (2). Typically it will just be\
done by the thread that finished (1).
Combined, the second and third bullet points above suggest the refill/granting
will typically be done by a request at the front of its queue. This is
important because one wakeup is saved when a granted request happens to be in an
already running thread.
Note there are a few cases that still lead to intermediate wakeup, however. The
first two are existing issues that also apply to the old algorithm, however, the
third (including both subpoints) is new.
- No request may be granted (only possible when rate limit dynamically\
decreases).
- Requests from a different queue may be granted.
- (2) may be run by a non-front request thread causing it to not be granted even\
if some requests in that same queue are granted. It can happen for a couple\
(unlikely) reasons.
- A new request may sneak in and grab the lock at the refill time, before the\
thread finishing (1) can wake up and grab it.
- A new request may sneak in and grab the lock and execute (1) before (2)'s\
chosen candidate can wake up and grab the lock. Then that non-front request\
thread performing (1) can carry over to perform (2).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8602
Test Plan:
- Use existing tests. The edge cases listed in the comment are all performance\
related; I could not really think of any related to correctness. The logic\
looks the same whether a thread wakes up/finishes its work early/on-time/late,\
or whether the thread is chosen vs. "steals" the work.
- Verified write throughput and CPU overhead are basically the same with and\
without this change, even in a rate limiter heavy workload:
Test command:
```
$ rm -rf /dev/shm/dbbench/ && TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -benchmarks=fillrandom -num_multi_db=64 -num_low_pri_threads=64 -num_high_pri_threads=64 -write_buffer_size=262144 -target_file_size_base=262144 -max_bytes_for_level_base=1048576 -rate_limiter_bytes_per_sec=16777216 -key_size=24 -value_size=1000 -num=10000 -compression_type=none -rate_limiter_refill_period_us=1000
```
Results before this PR:
```
fillrandom : 108.463 micros/op 9219 ops/sec; 9.0 MB/s
7.40user 8.84system 1:26.20elapsed 18%CPU (0avgtext+0avgdata 256140maxresident)k
```
Results after this PR:
```
fillrandom : 108.108 micros/op 9250 ops/sec; 9.0 MB/s
7.45user 8.23system 1:26.68elapsed 18%CPU (0avgtext+0avgdata 255688maxresident)k
```
Reviewed By: hx235
Differential Revision: D30048013
Pulled By: ajkr
fbshipit-source-id: 6741bba9d9dfbccab359806d725105817fef818b
Summary:
Context:
As need for new feature of resource management using RocksDB's rate limiter like [https://github.com/facebook/rocksdb/issues/8595](https://github.com/facebook/rocksdb/pull/8595) arises, it is about time to re-learn our rate limiter and make this learning process easier for others by improving its readability. The comment/assertion/one extra else-branch are added based on my best understanding toward the rate_limiter.cc and rate_limiter_test.cc up to date after giving it a hard read.
- Add code comments/assertion/one extra else-branch (that is not affecting existing behavior, see PR comment) to describe how leader-election works under multi-thread settings in GenericRateLimiter::Request()
- Add code comments to describe a non-obvious trick during clean-up of rate limiter destructor
- Add code comments to explain more about the starvation being fixed in GenericRateLimiter::Refill() through partial byte-granting
- Add code comments to the rate limiter's setup in a complicated unit test in rate_limiter_test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8596
Test Plan: - passed existing rate_limiter_test.cc
Reviewed By: ajkr
Differential Revision: D29982590
Pulled By: hx235
fbshipit-source-id: c3592986bb5b0c90d8229fe44f425251ec7e8a0a
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
The minimum rate check in RateLimiterTest.Rate can fail in
Facebook's CI system Sandcastle, presumably due to heavily loaded
machines. This change disables the minimum rate check for Sandcastle
runs, and cleans up the code disabling it on other CI environments. (The
amount of conditionally compiled code shall be minimized.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7728
Test Plan: try new test with and without setting envvar SANDCASTLE=1
Reviewed By: ltamasi
Differential Revision: D25247642
Pulled By: pdillinger
fbshipit-source-id: d786233af37af9a874adbb3a9e2707ec52c27a5a
Summary:
as title
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7536
Test Plan: see the new `build-macos` tests pass in circleci
Reviewed By: jay-zhuang
Differential Revision: D24243218
Pulled By: cheng-chang
fbshipit-source-id: 9b5f8a859e54c99a9ebe7efff6f336458a5d42de
Summary:
We have a number of tests hanging on MacOS and windows due to
mishandling of code for mock sleeps. In addition, the code was in
terrible shape because the same variable (addon_time_) would sometimes
refer to microseconds and sometimes to seconds. One test even assumed it
was nanoseconds but was written to pass anyway.
This has been cleaned up so that DB tests generally use a SpecialEnv
function to mock sleep, for either some number of microseconds or seconds
depending on the function called. But to call one of these, the test must first
call SetMockSleep (precondition enforced with assertion), which also turns
sleeps in RocksDB into mock sleeps. To also removes accounting for actual
clock time, call SetTimeElapseOnlySleepOnReopen, which implies
SetMockSleep (on DB re-open). This latter setting only works by applying
on DB re-open, otherwise havoc can ensue if Env goes back in time with
DB open.
More specifics:
Removed some unused test classes, and updated comments on the general
problem.
Fixed DBSSTTest.GetTotalSstFilesSize using a sync point callback instead
of mock time. For this we have the only modification to production code,
inserting a sync point callback in flush_job.cc, which is not a change to
production behavior.
Removed unnecessary resetting of mock times to 0 in many tests. RocksDB
deals in relative time. Any behaviors relying on absolute date/time are likely
a bug. (The above test DBSSTTest.GetTotalSstFilesSize was the only one
clearly injecting a specific absolute time for actual testing convenience.) Just
in case I misunderstood some test, I put this note in each replacement:
// NOTE: Presumed unnecessary and removed: resetting mock time in env
Strengthened some tests like MergeTestTime, MergeCompactionTimeTest, and
FilterCompactionTimeTest in db_test.cc
stats_history_test and blob_db_test are each their own beast, rather deeply
dependent on MockTimeEnv. Each gets its own variant of a work-around for
TimedWait in a mock time environment. (Reduces redundancy and
inconsistency in stats_history_test.)
Intended follow-up:
Remove TimedWait from the public API of InstrumentedCondVar, and only
make that accessible through Env by passing in an InstrumentedCondVar and
a deadline. Then the Env implementations mocking time can fix this problem
without using sync points. (Test infrastructure using sync points interferes
with individual tests' control over sync points.)
With that change, we can simplify/consolidate the scattered work-arounds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7101
Test Plan: make check on Linux and MacOS
Reviewed By: zhichao-cao
Differential Revision: D23032815
Pulled By: pdillinger
fbshipit-source-id: 7f33967ada8b83011fb54e8279365c008bd6610b
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
Dynamic adjustment of rate limit according to demand for background I/O. It increases by a factor when limiter is drained too frequently, and decreases by the same factor when limiter is not drained frequently enough. The parameters for this behavior are fixed in `GenericRateLimiter::Tune`. Other changes:
- make rate limiter's `Env*` configurable for testing
- track num drain intervals in RateLimiter so we don't have to rely on stats, which may be shared across different DB instances from the ones that share the RateLimiter.
Closes https://github.com/facebook/rocksdb/pull/2899
Differential Revision: D5858704
Pulled By: ajkr
fbshipit-source-id: cc2bac30f85e7f6fd63655d0a6732ef9ed7403b1
Summary:
RateLimiterTest.Rate test has been failing continuously since many days on travis in Mac OSX PLATFORM_DEPENDENT test suite.
Check https://travis-ci.org/facebook/rocksdb/pull_requests.
Disabling this test for now, so that we can investigate more in depth.
Closes https://github.com/facebook/rocksdb/pull/2451
Differential Revision: D5250147
Pulled By: sagar0
fbshipit-source-id: d58476a3c2792d20e875754d1516c4bc7174e86c
Summary:
Allow users to rate limit background work based on read bytes, written bytes, or sum of read and written bytes. Support these by changing the RateLimiter API, so no additional options were needed.
Closes https://github.com/facebook/rocksdb/pull/2433
Differential Revision: D5216946
Pulled By: ajkr
fbshipit-source-id: aec57a8357dbb4bfde2003261094d786d94f724e
Summary:
This is the metric I plan to use for adaptive rate limiting. The statistics are updated only if the rate limiter is drained by flush or compaction. I believe (but am not certain) that this is the normal case.
The Statistics object is passed in RateLimiter::Request() to avoid requiring changes to client code, which would've been necessary if we passed it in the RateLimiter constructor.
Closes https://github.com/facebook/rocksdb/pull/1946
Differential Revision: D4646489
Pulled By: ajkr
fbshipit-source-id: d8e0161
Summary:
In the current implementation of RateLimiter, the difference
between the configured rate and the actual rate might be more
than 20%, while our test only allows 15% difference. This diff
relaxes the acceptable bias RateLimiterTest::Rate test be 25%
to make the test less flaky.
Test Plan: rate_limiter_test
Reviewers: IslamAbdelRahman, andrewkr, yiwu, lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64941
Summary: 0.9 can make the test flaky since just found one test fail with 0.88
Test Plan: make all check
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63939
* Create rate limiter using factory function in the test.
* Convert function local statics in option helper to a C array
that does not perform dynamic memory allocation. This is helpful
when you try to memory isolate different DB instances.
Summary: When rate_bytes_per_sec * refill_period_us_ overflows, the actual limited rate is very low. Handle this case so the rate will be large.
Test Plan: Add a unit test for it.
Reviewers: IslamAbdelRahman, andrewkr
Reviewed By: andrewkr
Subscribers: yiwu, lightmark, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58929
Summary: This feature is going to be useful for mongodb+rocksdb. I'll expose it through mongo's API.
Test Plan: added new unit test. also will run TSAN on the new unit test
Reviewers: meyering, sdong
Reviewed By: meyering, sdong
Subscribers: meyering, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35307
Summary:
Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different.
In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest.
There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides.
```lang=bash
% cat ~/transform
#!/bin/sh
files=$(git ls-files '*test\.cc')
for file in $files
do
if grep -q "rocksdb::test::RunAllTests()" $file
then
if grep -Eq '^class \w+Test {' $file
then
perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file
perl -pi -e 's/^(TEST)/${1}_F/g' $file
fi
perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file
perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file
fi
done
% sh ~/transform
% make format
```
Second iteration of this diff contains only scripted changes.
Third iteration contains manual changes to fix last errors and make it compilable.
Test Plan:
Build and notice no errors.
```lang=bash
% USE_CLANG=1 make check -j55
```
Tests are still testing.
Reviewers: meyering, sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35157
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary:
...and fix all the errors :)
Jim suggested turning on -Wshadow because it helped him fix number of critical bugs in fbcode. I think it's a good idea to be -Wshadow clean.
Test Plan: compiles
Reviewers: yhchiang, rven, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27711
Summary:
User gets undefinied error since the definition is not exposed.
Also re-enable the db test with only upper bound check
Test Plan: db_test, rate_limit_test
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20403
Summary:
A generic rate limiter that can be shared by threads and rocksdb
instances. Will use this to smooth out write traffic generated by
compaction and flush. This will help us get better p99 behavior on flash
storage.
Test Plan:
unit test output
==== Test RateLimiterTest.Rate
request size [1 - 1023], limit 10 KB/sec, actual rate: 10.374969 KB/sec, elapsed 2002265
request size [1 - 2047], limit 20 KB/sec, actual rate: 20.771242 KB/sec, elapsed 2002139
request size [1 - 4095], limit 40 KB/sec, actual rate: 41.285299 KB/sec, elapsed 2202424
request size [1 - 8191], limit 80 KB/sec, actual rate: 81.371605 KB/sec, elapsed 2402558
request size [1 - 16383], limit 160 KB/sec, actual rate: 162.541268 KB/sec, elapsed 3303500
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19359
