Summary:
**Context:**
File ingestion never checks whether the key range it acts on overlaps with an ongoing RefitLevel() (used in `CompactRange()` with `change_level=true`). That's because RefitLevel() doesn't register and make its key range known to file ingestion. Though it checks overlapping with other compactions by https://github.com/facebook/rocksdb/blob/7.8.fb/db/external_sst_file_ingestion_job.cc#L998.
RefitLevel() (used in `CompactRange()` with `change_level=true`) doesn't check whether the key range it acts on overlaps with an ongoing file ingestion. That's because file ingestion does not register and make its key range known to other compactions.
- Note that non-refitlevel-compaction (e.g, manual compaction w/o RefitLevel() or general compaction) also does not check key range overlap with ongoing file ingestion for the same reason.
- But it's fine. Credited to cbi42's discovery, `WaitForIngestFile` was called by background and foreground compactions. They were introduced in 0f88160f67, 5c64fb67d2 and 87dfc1d23e.
- Regardless, this PR registers file ingestion like a compaction is a general approach that will also add range conflict check between file ingestion and non-refitlevel-compaction, though it has not been the issue motivated this PR.
Above are bugs resulting in two bad consequences:
- If file ingestion and RefitLevel() creates files in the same level, then range-overlapped files will be created at that level and caught as corruption by `force_consistency_checks=true`
- If file ingestion and RefitLevel() creates file in different levels, then with one further compaction on the ingested file, it can result in two same keys both with seqno 0 in two different levels. Then with iterator's [optimization](c62f322169/db/db_iter.cc (L342-L343)) that assumes no two same keys both with seqno 0, it will either break this assertion in debug build or, even worst, return value of this same key for the key after it, which is the wrong value to return, in release build.
Therefore we decide to introduce range conflict check for file ingestion and RefitLevel() inspired from the existing range conflict check among compactions.
**Summary:**
- Treat file ingestion job and RefitLevel() as `Compaction` of new compaction reasons: `CompactionReason::kExternalSstIngestion` and `CompactionReason::kRefitLevel` and register/unregister them. File ingestion is treated as compaction from L0 to different levels and RefitLevel() as compaction from source level to target level.
- Check for `RangeOverlapWithCompaction` with other ongoing compactions, `RegisterCompaction()` on this "compaction" before changing the LSM state in `VersionStorageInfo`, and `UnregisterCompaction()` after changing.
- Replace scattered fixes (0f88160f67, 5c64fb67d2 and 87dfc1d23e.) that prevents overlapping between file ingestion and non-refit-level compaction with this fix cuz those practices are easy to overlook.
- Misc: logic cleanup, see PR comments
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10988
Test Plan:
- New unit test `DBCompactionTestWithOngoingFileIngestionParam*` that failed pre-fix and passed afterwards.
- Made compatible with existing tests, see PR comments
- make check
- [Ongoing] Stress test rehearsal with normal value and aggressive CI value https://github.com/facebook/rocksdb/pull/10761
Reviewed By: cbi42
Differential Revision: D41535685
Pulled By: hx235
fbshipit-source-id: 549833a577ba1496d20a870583d4caa737da1258
Summary:
RocksDB has two public APIs: `DB::LockWAL()`/`DB::UnlockWAL()`. The current implementation acquires and
releases the internal `DBImpl::log_write_mutex_`.
According to the comment on `DBImpl::log_write_mutex_`: https://github.com/facebook/rocksdb/blob/7.8.fb/db/db_impl/db_impl.h#L2287:L2288
> Note: to avoid dealock, if needed to acquire both log_write_mutex_ and mutex_, the order should be first mutex_ and then log_write_mutex_.
This puts limitations on how applications can use the `LockWAL()` API. After `LockWAL()` returns ok, then application
should not perform any operation that acquires `mutex_`. Currently, the use case of `LockWAL()` is MyRocks implementing
the MySQL storage engine handlerton `lock_hton_log` interface. The operation that MyRocks performs after `LockWAL()`
is `GetSortedWalFiless()` which not only acquires mutex_, but also `log_write_mutex_`.
There are two issues:
1. Applications using these two APIs may hang if one thread calls `GetSortedWalFiles()` after
calling `LockWAL()` because log_write_mutex is not recursive.
2. Two threads may dead lock due to lock order inversion.
To fix these issues, we can modify the implementation of LockWAL so that it does not keep
`log_write_mutex_` held until UnlockWAL. To achieve the goal of locking the WAL, we can
instead manually inject a write stall so that all future writes will be stopped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11020
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D41785203
Pulled By: riversand963
fbshipit-source-id: 5ccb7a9c6eb9a2c3fa80fd2c399cc2568b8f89ce
Summary:
**Context:**
Sorting L0 files by `largest_seqno` has at least two inconvenience:
- File ingestion and compaction involving ingested files can create files of overlapping seqno range with the existing files. `force_consistency_check=true` will catch such overlap seqno range even those harmless overlap.
- For example, consider the following sequence of events ("key@n" indicates key at seqno "n")
- insert k1@1 to memtable m1
- ingest file s1 with k2@2, ingest file s2 with k3@3
- insert k4@4 to m1
- compact files s1, s2 and result in new file s3 of seqno range [2, 3]
- flush m1 and result in new file s4 of seqno range [1, 4]. And `force_consistency_check=true` will think s4 and s3 has file reordering corruption that might cause retuning an old value of k1
- However such caught corruption is a false positive since s1, s2 will not have overlapped keys with k1 or whatever inserted into m1 before ingest file s1 by the requirement of file ingestion (otherwise the m1 will be flushed first before any of the file ingestion completes). Therefore there in fact isn't any file reordering corruption.
- Single delete can decrease a file's largest seqno and ordering by `largest_seqno` can introduce a wrong ordering hence file reordering corruption
- For example, consider the following sequence of events ("key@n" indicates key at seqno "n", Credit to ajkr for this example)
- an existing SST s1 contains only k1@1
- insert k1@2 to memtable m1
- ingest file s2 with k3@3, ingest file s3 with k4@4
- insert single delete k5@5 in m1
- flush m1 and result in new file s4 of seqno range [2, 5]
- compact s1, s2, s3 and result in new file s5 of seqno range [1, 4]
- compact s4 and result in new file s6 of seqno range [2] due to single delete
- By the last step, we have file ordering by largest seqno (">" means "newer") : s5 > s6 while s6 contains a newer version of the k1's value (i.e, k1@2) than s5, which is a real reordering corruption. While this can be caught by `force_consistency_check=true`, there isn't a good way to prevent this from happening if ordering by `largest_seqno`
Therefore, we are redesigning the sorting criteria of L0 files and avoid above inconvenience. Credit to ajkr , we now introduce `epoch_num` which describes the order of a file being flushed or ingested/imported (compaction output file will has the minimum `epoch_num` among input files'). This will avoid the above inconvenience in the following ways:
- In the first case above, there will no longer be overlap seqno range check in `force_consistency_check=true` but `epoch_number` ordering check. This will result in file ordering s1 < s2 < s4 (pre-compaction) and s3 < s4 (post-compaction) which won't trigger false positive corruption. See test class `DBCompactionTestL0FilesMisorderCorruption*` for more.
- In the second case above, this will result in file ordering s1 < s2 < s3 < s4 (pre-compacting s1, s2, s3), s5 < s4 (post-compacting s1, s2, s3), s5 < s6 (post-compacting s4), which are correct file ordering without causing any corruption.
**Summary:**
- Introduce `epoch_number` stored per `ColumnFamilyData` and sort CF's L0 files by their assigned `epoch_number` instead of `largest_seqno`.
- `epoch_number` is increased and assigned upon `VersionEdit::AddFile()` for flush (or similarly for WriteLevel0TableForRecovery) and file ingestion (except for allow_behind_true, which will always get assigned as the `kReservedEpochNumberForFileIngestedBehind`)
- Compaction output file is assigned with the minimum `epoch_number` among input files'
- Refit level: reuse refitted file's epoch_number
- Other paths needing `epoch_number` treatment:
- Import column families: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`
- Repair: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`.
- Assigning new epoch_number to a file and adding this file to LSM tree should be atomic. This is guaranteed by us assigning epoch_number right upon `VersionEdit::AddFile()` where this version edit will be apply to LSM tree shape right after by holding the db mutex (e.g, flush, file ingestion, import column family) or by there is only 1 ongoing edit per CF (e.g, WriteLevel0TableForRecovery, Repair).
- Assigning the minimum input epoch number to compaction output file won't misorder L0 files (even through later `Refit(target_level=0)`). It's due to for every key "k" in the input range, a legit compaction will cover a continuous epoch number range of that key. As long as we assign the key "k" the minimum input epoch number, it won't become newer or older than the versions of this key that aren't included in this compaction hence no misorder.
- Persist `epoch_number` of each file in manifest and recover `epoch_number` on db recovery
- Backward compatibility with old db without `epoch_number` support is guaranteed by assigning `epoch_number` to recovered files by `NewestFirstBySeqno` order. See `VersionStorageInfo::RecoverEpochNumbers()` for more
- Forward compatibility with manifest is guaranteed by flexibility of `NewFileCustomTag`
- Replace `force_consistent_check` on L0 with `epoch_number` and remove false positive check like case 1 with `largest_seqno` above
- Due to backward compatibility issue, we might encounter files with missing epoch number at the beginning of db recovery. We will still use old L0 sorting mechanism (`NewestFirstBySeqno`) to check/sort them till we infer their epoch number. See usages of `EpochNumberRequirement`.
- Remove fix https://github.com/facebook/rocksdb/pull/5958#issue-511150930 and their outdated tests to file reordering corruption because such fix can be replaced by this PR.
- Misc:
- update existing tests with `epoch_number` so make check will pass
- update https://github.com/facebook/rocksdb/pull/5958#issue-511150930 tests to verify corruption is fixed using `epoch_number` and cover universal/fifo compaction/CompactRange/CompactFile cases
- assert db_mutex is held for a few places before calling ColumnFamilyData::NewEpochNumber()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10922
Test Plan:
- `make check`
- New unit tests under `db/db_compaction_test.cc`, `db/db_test2.cc`, `db/version_builder_test.cc`, `db/repair_test.cc`
- Updated tests (i.e, `DBCompactionTestL0FilesMisorderCorruption*`) under https://github.com/facebook/rocksdb/pull/5958#issue-511150930
- [Ongoing] Compatibility test: manually run 36a5686ec0 (with file ingestion off for running the `.orig` binary to prevent this bug affecting upgrade/downgrade formality checking) for 1 hour on `simple black/white box`, `cf_consistency/txn/enable_ts with whitebox + test_best_efforts_recovery with blackbox`
- [Ongoing] normal db stress test
- [Ongoing] db stress test with aggressive value https://github.com/facebook/rocksdb/pull/10761
Reviewed By: ajkr
Differential Revision: D41063187
Pulled By: hx235
fbshipit-source-id: 826cb23455de7beaabe2d16c57682a82733a32a9
Summary:
Currently, `iterate_upper_bound` is not checked for range tombstone keys in MergingIterator. This may impact performance when there is a large number of range tombstones right after `iterate_upper_bound`. This PR fixes this issue by checking `iterate_upper_bound` in MergingIterator for range tombstone keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10966
Test Plan:
- added unit test
- stress test: `python3 tools/db_crashtest.py whitebox --simple --verify_iterator_with_expected_state_one_in=5 --delrangepercent=5 --prefixpercent=18 --writepercent=48 --readpercen=15 --duration=36000 --range_deletion_width=100`
- ran different stress tests over sandcastle
- Falcon team ran some test traffic and saw reduced CPU usage on processing range tombstones.
Reviewed By: ajkr
Differential Revision: D41414172
Pulled By: cbi42
fbshipit-source-id: 9b2c29eb3abb99327c6a649bdc412e70d863f981
Summary:
Background. One of the core risks of chosing HyperClockCache is ending up with degraded performance if estimated_entry_charge is very significantly wrong. Too low leads to under-utilized hash table, which wastes a bit of (tracked) memory and likely increases access times due to larger working set size (more TLB misses). Too high leads to fully populated hash table (at some limit with reasonable lookup performance) and not being able to cache as many objects as the memory limit would allow. In either case, performance degradation is graceful/continuous but can be quite significant. For example, cutting block size in half without updating estimated_entry_charge could lead to a large portion of configured block cache memory (up to roughly 1/3) going unused.
Fix. This change adds a mechanism through which the DB periodically probes the block cache(s) for "problems" to report, and adds diagnostics to the HyperClockCache for bad estimated_entry_charge. The periodic probing is currently done with DumpStats / stats_dump_period_sec, and diagnostics reported to info_log (normally LOG file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10965
Test Plan:
unit test included. Doesn't cover all the implemented subtleties of reporting, but ensures basics of when to report or not.
Also manual testing with db_bench. Create db with
```
./db_bench --benchmarks=fillrandom,flush --num=3000000 --disable_wal=1
```
Use and check LOG file for HyperClockCache for various block sizes (used as estimated_entry_charge)
```
./db_bench --use_existing_db --benchmarks=readrandom --num=3000000 --duration=20 --stats_dump_period_sec=8 --cache_type=hyper_clock_cache -block_size=XXXX
```
Seeing warnings / errors or not as expected.
Reviewed By: anand1976
Differential Revision: D41406932
Pulled By: pdillinger
fbshipit-source-id: 4ca56162b73017e4b9cec2cad74466f49c27a0a7
Summary:
When there is a column family that doesn't get any traffic, its stats are still dumped when options.options.stats_dump_period_sec triggers. This sometimes spam the information logs. With this change, we skip the printing if there is not change, until 8 periods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10891
Test Plan: Manually test the behavior with hacked db_bench setups.
Reviewed By: jay-zhuang
Differential Revision: D40777183
fbshipit-source-id: ef0b9a793e4f6282df099b464f01d1fb4c5a2cab
Summary:
Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter.
`DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`.
New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer.
This same philosophy can be applied to KV and IO tracing as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811
Test Plan:
existing unit tests
Old API DB::StartBlockTrace checked with db_bench tool
create database
```
./db_bench --benchmarks="fillseq" \
--key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \
--cache_index_and_filter_blocks --cache_size=1048576 \
--disable_auto_compactions=1 --disable_wal=1 --compression_type=none \
--min_level_to_compress=-1 --compression_ratio=1 --num=10000000
```
To trace block cache accesses when running readrandom benchmark:
```
./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \
--key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \
--cache_index_and_filter_blocks --cache_size=1048576 \
--disable_auto_compactions=1 --disable_wal=1 --compression_type=none \
--min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \
--threads=16 \
-block_cache_trace_file="/tmp/binary_trace_test_example" \
-block_cache_trace_max_trace_file_size_in_bytes=1073741824 \
-block_cache_trace_sampling_frequency=1
```
Reviewed By: anand1976
Differential Revision: D40435289
Pulled By: akankshamahajan15
fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
Summary:
When the `preclude_last_level_data_seconds` or
`preserve_internal_time_seconds` is smaller than 100 (seconds), no seqno->time information was recorded.
Also make sure all data will be compacted to the last level even if there's no write to record the time information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10829
Test Plan: added unittest
Reviewed By: siying
Differential Revision: D40443934
Pulled By: jay-zhuang
fbshipit-source-id: 2ecf1361daf9f3e5c3385aee6dc924fa59e2813a
Summary:
Add option `preserve_internal_time_seconds` to preserve the internal
time information.
It's mostly for the migration of the existing data to tiered storage (
`preclude_last_level_data_seconds`). When the tiering feature is just
enabled, the existing data won't have the time information to decide if
it's hot or cold. Enabling this feature will start collect and preserve
the time information for the new data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10747
Reviewed By: siying
Differential Revision: D39910141
Pulled By: siying
fbshipit-source-id: 25c21638e37b1a7c44006f636b7d714fe7242138
Summary:
fix for https://github.com/facebook/rocksdb/issues/10752 where RocksDB could be in an infinite compaction loop (with compaction reason kBottommostFiles) if allow_ingest_behind is enabled and the bottommost level is unfilled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10767
Test Plan: Added a unit test to reproduce the compaction loop.
Reviewed By: ajkr
Differential Revision: D40031861
Pulled By: ajkr
fbshipit-source-id: 71c4b02931fbe507a847632905404c9b8fa8c96b
Summary:
When `FlushOptions::wait` is set to false, manual flush should not stall forever.
If the database has already stopped writes, then the thread calling `DB::Flush()` with
`FlushOptions::wait=false` should not enter the `DBImpl::write_thread_`.
To prevent this, we should do a check at the beginning and return `TryAgain()`
Resolves: https://github.com/facebook/rocksdb/issues/9892
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10001
Reviewed By: siying
Differential Revision: D36422303
Pulled By: siying
fbshipit-source-id: 723bd3065e8edc4f17c82449d0d6b95a2381ac0a
Summary:
Add new property "do_not_recurse" in IOOptions for underlying file system to skip iteration of directories during DB::Open if there are no sub directories and list only files.
By default this property is set to false. This property is set true currently in the code where RocksDB is sure only files are needed during DB::Open.
Provided support in PosixFileSystem to use "do_not_recurse".
TestPlan:
- Existing tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10668
Reviewed By: anand1976
Differential Revision: D39471683
Pulled By: akankshamahajan15
fbshipit-source-id: 90e32f0b86d5346d53bc2714d3a0e7002590527f
Summary:
**Context/Summary:**
Introduce `manual_wal_flush_one_in` as titled.
- When `manual_wal_flush_one_in > 0`, we also need tracing to correctly verify recovery because WAL data can be lost in this case when `FlushWAL()` is not explicitly called by users of RocksDB (in our case, db stress) and the recovery from such potential WAL data loss is a prefix recovery that requires tracing to verify. As another consequence, we need to disable features can't run under unsync data loss with `manual_wal_flush_one_in`
Incompatibilities fixed along the way:
```
db_stress: db/db_impl/db_impl_open.cc:2063: static rocksdb::Status rocksdb::DBImpl::Open(const rocksdb::DBOptions&, const string&, const std::vector<rocksdb::ColumnFamilyDescriptor>&, std::vector<rocksdb::ColumnFamilyHandle*>*, rocksdb::DB**, bool, bool): Assertion `impl->TEST_WALBufferIsEmpty()' failed.
```
- It turns out that `Writer::AddCompressionTypeRecord` before this assertion `EmitPhysicalRecord(kSetCompressionType, encode.data(), encode.size());` but do not trigger flush if `manual_wal_flush` is set . This leads to `impl->TEST_WALBufferIsEmpty()' is false.
- As suggested, assertion is removed and violation case is handled by `FlushWAL(sync=true)` along with refactoring `TEST_WALBufferIsEmpty()` to be `WALBufferIsEmpty()` since it is used in prod code now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10698
Test Plan:
- Locally running `python3 tools/db_crashtest.py blackbox --manual_wal_flush_one_in=1 --manual_wal_flush=1 --sync_wal_one_in=100 --atomic_flush=1 --flush_one_in=100 --column_families=3`
- Joined https://github.com/facebook/rocksdb/pull/10624 in auto CI testings with all RocksDB stress/crash test jobs
Reviewed By: ajkr
Differential Revision: D39593752
Pulled By: ajkr
fbshipit-source-id: 3a2135bb792c52d2ffa60257d4fbc557fb04d2ce
Summary:
Change the library order in PLATFORM_LDFLAGS to enable fbcode platform 10 build with folly. This PR also has a few fixes for platform 10 compiler errors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10708
Test Plan:
ROCKSDB_FBCODE_BUILD_WITH_PLATFORM010=1 USE_COROUTINES=1 make -j64 check
ROCKSDB_FBCODE_BUILD_WITH_PLATFORM010=1 USE_FOLLY=1 make -j64 check
Reviewed By: ajkr
Differential Revision: D39666590
Pulled By: anand1976
fbshipit-source-id: 256a1127ef561399cd6299a6a392ca29bd68ca44
Summary:
when there is a single memtable without range tombstones and no SST files in the database, DBIter should wrap memtable iterator directly. Currently we create a merging iterator on top of the memtable iterator, and have DBIter wrap around it. This causes iterator regression and this PR fixes this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10705
Test Plan:
- `make check`
- Performance:
- Set up: `./db_bench -benchmarks=filluniquerandom -write_buffer_size=$((1 << 30)) -num=10000`
- Benchmark: `./db_bench -benchmarks=seekrandom -use_existing_db=true -avoid_flush_during_recovery=true -write_buffer_size=$((1 << 30)) -num=10000 -threads=16 -duration=60 -seek_nexts=$seek_nexts`
```
seek_nexts main op/sec https://github.com/facebook/rocksdb/issues/10705 RocksDB v7.6
0 5746568 5749033 5786180
30 2411690 3006466 2837699
1000 102556 128902 124667
```
Reviewed By: ajkr
Differential Revision: D39644221
Pulled By: cbi42
fbshipit-source-id: 8063ff611ba31b0e5670041da3927c8c54b2097d
Summary:
**Context/Summary:**
Previous experience with bugs and flaky tests taught us there exist features in RocksDB vulnerable to race condition caused by acquiring db mutex at a particular timing. This PR aggressively exposes those vulnerable features by injecting spurious wakeup and sleep to cause acquiring db mutex at various timing in order to expose such race condition
**Testing:**
- `COERCE_CONTEXT_SWITCH=1 make -j56 check / make -j56 db_stress` should reveal
- flaky tests caused by db mutex related race condition
- Reverted https://github.com/facebook/rocksdb/pull/9528
- A/B testing on `COMPILE_WITH_TSAN=1 make -j56 listener_test` w/ and w/o `COERCE_CONTEXT_SWITCH=1` followed by `./listener_test --gtest_filter=EventListenerTest.MultiCF --gtest_repeat=10`
- `COERCE_CONTEXT_SWITCH=1` can cause expected test failure (i.e, expose target TSAN data race error) within 10 run while the other couldn't.
- This proves our injection can expose flaky tests caused by db mutex related race condition faster.
- known or new race-condition-type of internal bug by continuously running this PR
- Performance
- High ops-threads time: COERCE_CONTEXT_SWITCH=1 regressed by 4 times slower (2:01.16 vs 0:22.10 elapsed ). This PR will be run as a separate CI job so this regression won't affect any existing job.
```
TEST_TMPDIR=$db /usr/bin/time ./db_stress \
--ops_per_thread=100000 --expected_values_dir=$exp --clear_column_family_one_in=0 \
--write_buffer_size=524288 —target_file_size_base=524288 —ingest_external_file_one_in=100 —compact_files_one_in=1000 —compact_range_one_in=1000
```
- Start-up time: COERCE_CONTEXT_SWITCH=1 didn't regress by 25% (0:01.51 vs 0:01.29 elapsed)
```
TEST_TMPDIR=$db ./db_stress -ops_per_thread=100000000 -expected_values_dir=$exp --clear_column_family_one_in=0 & sleep 120; pkill -9 db_stress
TEST_TMPDIR=$db /usr/bin/time ./db_stress \
--ops_per_thread=1 -reopen=0 --expected_values_dir=$exp --clear_column_family_one_in=0 --destroy_db_initially=0
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10291
Reviewed By: ajkr
Differential Revision: D39231182
Pulled By: hx235
fbshipit-source-id: 7ab6695430460e0826727fd8c66679b32b3e44b6
Summary:
Delete range logic is moved from `DBIter` to `MergingIterator`, and `MergingIterator` will seek to the end of a range deletion if possible instead of scanning through each key and check with `RangeDelAggregator`.
With the invariant that a key in level L (consider memtable as the first level, each immutable and L0 as a separate level) has a larger sequence number than all keys in any level >L, a range tombstone `[start, end)` from level L covers all keys in its range in any level >L. This property motivates optimizations in iterator:
- in `Seek(target)`, if level L has a range tombstone `[start, end)` that covers `target.UserKey`, then for all levels > L, we can do Seek() on `end` instead of `target` to skip some range tombstone covered keys.
- in `Next()/Prev()`, if the current key is covered by a range tombstone `[start, end)` from level L, we can do `Seek` to `end` for all levels > L.
This PR implements the above optimizations in `MergingIterator`. As all range tombstone covered keys are now skipped in `MergingIterator`, the range tombstone logic is removed from `DBIter`. The idea in this PR is similar to https://github.com/facebook/rocksdb/issues/7317, but this PR leaves `InternalIterator` interface mostly unchanged. **Credit**: the cascading seek optimization and the sentinel key (discussed below) are inspired by [Pebble](https://github.com/cockroachdb/pebble/blob/master/merging_iter.go) and suggested by ajkr in https://github.com/facebook/rocksdb/issues/7317. The two optimizations are mostly implemented in `SeekImpl()/SeekForPrevImpl()` and `IsNextDeleted()/IsPrevDeleted()` in `merging_iterator.cc`. See comments for each method for more detail.
One notable change is that the minHeap/maxHeap used by `MergingIterator` now contains range tombstone end keys besides point key iterators. This helps to reduce the number of key comparisons. For example, for a range tombstone `[start, end)`, a `start` and an `end` `HeapItem` are inserted into the heap. When a `HeapItem` for range tombstone start key is popped from the minHeap, we know this range tombstone becomes "active" in the sense that, before the range tombstone's end key is popped from the minHeap, all the keys popped from this heap is covered by the range tombstone's internal key range `[start, end)`.
Another major change, *delete range sentinel key*, is made to `LevelIterator`. Before this PR, when all point keys in an SST file are iterated through in `MergingIterator`, a level iterator would advance to the next SST file in its level. In the case when an SST file has a range tombstone that covers keys beyond the SST file's last point key, advancing to the next SST file would lose this range tombstone. Consequently, `MergingIterator` could return keys that should have been deleted by some range tombstone. We prevent this by pretending that file boundaries in each SST file are sentinel keys. A `LevelIterator` now only advance the file iterator once the sentinel key is processed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10449
Test Plan:
- Added many unit tests in db_range_del_test
- Stress test: `./db_stress --readpercent=5 --prefixpercent=19 --writepercent=20 -delpercent=10 --iterpercent=44 --delrangepercent=2`
- Additional iterator stress test is added to verify against iterators against expected state: https://github.com/facebook/rocksdb/issues/10538. This is based on ajkr's previous attempt https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913.
```
python3 ./tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --compression_type=none --max_background_compactions=8 --value_size_mult=33 --max_key=5000000 --interval=10 --duration=7200 --delrangepercent=3 --delpercent=9 --iterpercent=25 --writepercent=60 --readpercent=3 --prefixpercent=0 --num_iterations=1000 --range_deletion_width=100 --verify_iterator_with_expected_state_one_in=1
```
- Performance benchmark: I used a similar setup as in the blog [post](http://rocksdb.org/blog/2018/11/21/delete-range.html) that introduced DeleteRange, "a database with 5 million data keys, and 10000 range tombstones (ignoring those dropped during compaction) that were written in regular intervals after 4.5 million data keys were written". As expected, the performance with this PR depends on the range tombstone width.
```
# Setup:
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=fillrandom --writes=4500000 --num=5000000
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=overwrite --writes=500000 --num=5000000 --use_existing_db=true --writes_per_range_tombstone=50
# Scan entire DB
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=readseq[-X5] --use_existing_db=true --num=5000000 --disable_auto_compactions=true
# Short range scan (10 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=100000 --seek_nexts=10 --disable_auto_compactions=true
# Long range scan(1000 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=2500 --seek_nexts=1000 --disable_auto_compactions=true
```
Avg over of 10 runs (some slower tests had fews runs):
For the first column (tombstone), 0 means no range tombstone, 100-10000 means width of the 10k range tombstones, and 1 means there is a single range tombstone in the entire DB (width is 1000). The 1 tombstone case is to test regression when there's very few range tombstones in the DB, as no range tombstone is likely to take a different code path than with range tombstones.
- Scan entire DB
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2525600 (± 43564) |2486917 (± 33698) |-1.53% |
| 100 |1853835 (± 24736) |2073884 (± 32176) |+11.87% |
| 1000 |422415 (± 7466) |1115801 (± 22781) |+164.15% |
| 10000 |22384 (± 227) |227919 (± 6647) |+918.22% |
| 1 range tombstone |2176540 (± 39050) |2434954 (± 24563) |+11.87% |
- Short range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |35398 (± 533) |35338 (± 569) |-0.17% |
| 100 |28276 (± 664) |31684 (± 331) |+12.05% |
| 1000 |7637 (± 77) |25422 (± 277) |+232.88% |
| 10000 |1367 |28667 |+1997.07% |
| 1 range tombstone |32618 (± 581) |32748 (± 506) |+0.4% |
- Long range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2262 (± 33) |2353 (± 20) |+4.02% |
| 100 |1696 (± 26) |1926 (± 18) |+13.56% |
| 1000 |410 (± 6) |1255 (± 29) |+206.1% |
| 10000 |25 |414 |+1556.0% |
| 1 range tombstone |1957 (± 30) |2185 (± 44) |+11.65% |
- Microbench does not show significant regression: https://gist.github.com/cbi42/59f280f85a59b678e7e5d8561e693b61
Reviewed By: ajkr
Differential Revision: D38450331
Pulled By: cbi42
fbshipit-source-id: b5ef12e8d8c289ed2e163ccdf277f5039b511fca
Summary:
**Context:**
Below crash test revealed a bug that directory containing CURRENT file (short for `dir_contains_current_file` below) was not always get synced after a new CURRENT is created and being called with `RenameFile` as part of the creation.
This bug exposes a risk that such un-synced directory containing the updated CURRENT can’t survive a host crash (e.g, power loss) hence get corrupted. This then will be followed by a recovery from a corrupted CURRENT that we don't want.
The root-cause is that a nullptr `FSDirectory* dir_contains_current_file` sometimes gets passed-down to `SetCurrentFile()` hence in those case `dir_contains_current_file->FSDirectory::FsyncWithDirOptions()` will be skipped (which otherwise will internally call`Env/FS::SyncDic()` )
```
./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --allow_data_in_errors=True --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=8 --block_size=16384 --bloom_bits=134.8015470676662 --bottommost_compression_type=disable --cache_size=8388608 --checkpoint_one_in=1000000 --checksum_type=kCRC32c --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_ttl=100 --compression_max_dict_buffer_bytes=511 --compression_max_dict_bytes=16384 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=65536 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --expected_values_dir=$exp --fail_if_options_file_error=1 --file_checksum_impl=none --flush_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --ingest_external_file_one_in=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --mark_for_compaction_one_file_in=10 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=16384 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.001 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --mmap_read=1 --nooverwritepercent=1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=5 --prefixpercent=5 --prepopulate_block_cache=1 --progress_reports=0 --read_fault_one_in=1000 --readpercent=45 --recycle_log_file_num=0 --reopen=0 --ribbon_starting_level=999 --secondary_cache_fault_one_in=32 --secondary_cache_uri=compressed_secondary_cache://capacity=8388608 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --subcompactions=3 --sync_fault_injection=1 --target_file_size_base=2097 --target_file_size_multiplier=2 --test_batches_snapshots=1 --top_level_index_pinning=1 --use_full_merge_v1=1 --use_merge=1 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --write_buffer_size=4194 --writepercent=35
```
```
stderr:
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
db_stress: utilities/fault_injection_fs.cc:748: virtual rocksdb::IOStatus rocksdb::FaultInjectionTestFS::RenameFile(const std::string &, const std::string &, const rocksdb::IOOptions &, rocksdb::IODebugContext *): Assertion `tlist.find(tdn.second) == tlist.end()' failed.`
```
**Summary:**
The PR ensured the non-test path pass down a non-null dir containing CURRENT (which is by current RocksDB assumption just db_dir) by doing the following:
- Renamed `directory_to_fsync` as `dir_contains_current_file` in `SetCurrentFile()` to tighten the association between this directory and CURRENT file
- Changed `SetCurrentFile()` API to require `dir_contains_current_file` being passed-in, instead of making it by default nullptr.
- Because `SetCurrentFile()`'s `dir_contains_current_file` is passed down from `VersionSet::LogAndApply()` then `VersionSet::ProcessManifestWrites()` (i.e, think about this as a chain of 3 functions related to MANIFEST update), these 2 functions also got refactored to require `dir_contains_current_file`
- Updated the non-test-path callers of these 3 functions to obtain and pass in non-nullptr `dir_contains_current_file`, which by current assumption of RocksDB, is the `FSDirectory* db_dir`.
- `db_impl` path will obtain `DBImpl::directories_.getDbDir()` while others with no access to such `directories_` are obtained on the fly by creating such object `FileSystem::NewDirectory(..)` and manage it by unique pointers to ensure short life time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10573
Test Plan:
- `make check`
- Passed the repro db_stress command
- For future improvement, since we currently don't assert dir containing CURRENT to be non-nullptr due to https://github.com/facebook/rocksdb/pull/10573#pullrequestreview-1087698899, there is still chances that future developers mistakenly pass down nullptr dir containing CURRENT thus resulting skipped sync dir and cause the bug again. Therefore a smarter test (e.g, such as quoted from ajkr "(make) unsynced data loss to be dropping files corresponding to unsynced directory entries") is still needed.
Reviewed By: ajkr
Differential Revision: D39005886
Pulled By: hx235
fbshipit-source-id: 336fb9090d0cfa6ca3dd580db86268007dde7f5a
Summary:
Timer has a limitation that it cannot re-register a task with the same name,
because the cancel only mark the task as invalid and wait for the Timer thread
to clean it up later, before the task is cleaned up, the same task name cannot
be added. Which makes the task option update likely to fail, which basically
cancel and re-register the same task name. Change the periodic task name to a
random unique id and store it in periodic_task_scheduler.
Also refactor the `periodic_work` to `periodic_task` to make each job function
as a `task`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10379
Test Plan: unittests
Reviewed By: ajkr
Differential Revision: D38000615
Pulled By: jay-zhuang
fbshipit-source-id: e4135f9422e3b53aaec8eda54f4e18ce633a279e
Summary:
WAL append and switch can both happen between `FlushWAL(true /* sync */)`'s sync operations and its call to `MarkLogsSynced()`. We permit this since locks need to be released for the sync operations. Such an appended/switched WAL is both inactive and incompletely synced at the time `MarkLogsSynced()` processes it.
Prior to this PR, `MarkLogsSynced()` assumed all inactive WALs were fully synced and removed them from consideration for future syncs. That was wrong in the scenario described above and led to the latest append(s) never being synced. This PR changes `MarkLogsSynced()` to only remove inactive WALs from consideration for which all flushed data has been synced.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10560
Test Plan: repro unit test for the scenario described above. Without this PR, it fails on "key2" not found
Reviewed By: riversand963
Differential Revision: D38957391
Pulled By: ajkr
fbshipit-source-id: da77175eba97ff251a4219b227b3bb2d4843ed26
Summary:
The patch adds a new API `GetEntity` that can be used to perform
wide-column point lookups. It also extends the `Get` code path and
the `MemTable` / `MemTableList` and `Version` / `GetContext` logic
accordingly so that wide-column entities can be served from both
memtables and SSTs. If the result of a lookup is a wide-column entity
(`kTypeWideColumnEntity`), it is passed to the application in deserialized
form; if it is a plain old key-value (`kTypeValue`), it is presented as a
wide-column entity with a single default (anonymous) column.
(In contrast, regular `Get` returns plain old key-values as-is, and
returns the value of the default column for wide-column entities, see
https://github.com/facebook/rocksdb/issues/10483 .)
The result of `GetEntity` is a self-contained `PinnableWideColumns` object.
`PinnableWideColumns` contains a `PinnableSlice`, which either stores the
underlying data in its own buffer or holds on to a cache handle. It also contains
a `WideColumns` instance, which indexes the contents of the `PinnableSlice`,
so applications can access the values of columns efficiently.
There are several pieces of functionality which are currently not supported
for wide-column entities: there is currently no `MultiGetEntity` or wide-column
iterator; also, `Merge` and `GetMergeOperands` are not supported, and there
is no `GetEntity` implementation for read-only and secondary instances.
We plan to implement these in future PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10540
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D38847474
Pulled By: ltamasi
fbshipit-source-id: 42311a34ccdfe88b3775e847a5e2a5296e002b5b
Summary:
- Right now each read fragments the memtable range tombstones https://github.com/facebook/rocksdb/issues/4808. This PR explores the idea of fragmenting memtable range tombstones in the write path and reads can just read this cached fragmented tombstone without any fragmenting cost. This PR only does the caching for immutable memtable, and does so right before a memtable is added to an immutable memtable list. The fragmentation is done without holding mutex to minimize its performance impact.
- db_bench is updated to print out the number of range deletions executed if there is any.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10380
Test Plan:
- CI, added asserts in various places to check whether a fragmented range tombstone list should have been constructed.
- Benchmark: as this PR only optimizes immutable memtable path, the number of writes in the benchmark is chosen such an immutable memtable is created and range tombstones are in that memtable.
```
single thread:
./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=1 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=100000 --max_num_range_tombstones=100
multi_thread
./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=1 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=15000 --reads=20000 --threads=32 --max_num_range_tombstones=100
```
Commit 99cdf16464 is included in benchmark result. It was an earlier attempt where tombstones are fragmented for each write operation. Reader threads share it using a shared_ptr which would slow down multi-thread read performance as seen in benchmark results.
Results are averaged over 5 runs.
Single thread result:
| Max # tombstones | main fillrandom micros/op | 99cdf16464 | Post PR | main readrandom micros/op | 99cdf16464 | Post PR |
| ------------- | ------------- |------------- |------------- |------------- |------------- |------------- |
| 0 |6.68 |6.57 |6.72 |4.72 |4.79 |4.54 |
| 1 |6.67 |6.58 |6.62 |5.41 |4.74 |4.72 |
| 10 |6.59 |6.5 |6.56 |7.83 |4.69 |4.59 |
| 100 |6.62 |6.75 |6.58 |29.57 |5.04 |5.09 |
| 1000 |6.54 |6.82 |6.61 |320.33 |5.22 |5.21 |
32-thread result: note that "Max # tombstones" is per thread.
| Max # tombstones | main fillrandom micros/op | 99cdf16464 | Post PR | main readrandom micros/op | 99cdf16464 | Post PR |
| ------------- | ------------- |------------- |------------- |------------- |------------- |------------- |
| 0 |234.52 |260.25 |239.42 |5.06 |5.38 |5.09 |
| 1 |236.46 |262.0 |231.1 |19.57 |22.14 |5.45 |
| 10 |236.95 |263.84 |251.49 |151.73 |21.61 |5.73 |
| 100 |268.16 |296.8 |280.13 |2308.52 |22.27 |6.57 |
Reviewed By: ajkr
Differential Revision: D37916564
Pulled By: cbi42
fbshipit-source-id: 05d6d2e16df26c374c57ddcca13a5bfe9d5b731e
Summary:
This PR avoids allocations and copies for the result of `GetMergeOperands()` when the average operand size is at least 256 bytes and the total operands size is at least 32KB. The `GetMergeOperands()` already included `PinnableSlice` but was calling `PinSelf()` (i.e., allocating and copying) for each operand. When this optimization takes effect, we instead call `PinSlice()` to skip that allocation and copy. Resources are pinned in order for the `PinnableSlice` to point to valid memory even after `GetMergeOperands()` returns.
The pinned resources include a referenced `SuperVersion`, a `MergingContext`, and a `PinnedIteratorsManager`. They are bundled into a `GetMergeOperandsState`. We use `SharedCleanablePtr` to share that bundle among all `PinnableSlice`s populated by `GetMergeOperands()`. That way, the last `PinnableSlice` to be `Reset()` will cleanup the bundle, including unreferencing the `SuperVersion`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10458
Test Plan:
- new DB level test
- measured benefit/regression in a number of memtable scenarios
Setup command:
```
$ ./db_bench -benchmarks=mergerandom -merge_operator=StringAppendOperator -num=$num -writes=16384 -key_size=16 -value_size=$value_sz -compression_type=none -write_buffer_size=1048576000
```
Benchmark command:
```
./db_bench -threads=$threads -use_existing_db=true -avoid_flush_during_recovery=true -write_buffer_size=1048576000 -benchmarks=readrandomoperands -merge_operator=StringAppendOperator -num=$num -duration=10
```
Worst regression is when a key has many tiny operands:
- Parameters: num=1 (implying 16384 operands per key), value_sz=8, threads=1
- `GetMergeOperands()` latency increases 682 micros -> 800 micros (+17%)
The regression disappears into the noise (<1% difference) if we remove the `Reset()` loop and the size counting loop. The former is arguably needed regardless of this PR as the convention in `Get()` and `MultiGet()` is to `Reset()` the input `PinnableSlice`s at the start. The latter could be optimized to count the size as we accumulate operands rather than after the fact.
Best improvement is when a key has large operands and high concurrency:
- Parameters: num=4 (implying 4096 operands per key), value_sz=2KB, threads=32
- `GetMergeOperands()` latency decreases 11492 micros -> 437 micros (-96%).
Reviewed By: cbi42
Differential Revision: D38336578
Pulled By: ajkr
fbshipit-source-id: 48146d127e04cb7f2d4d2939a2b9dff3aba18258
Summary:
## Problem Summary
RocksDB will acquire the global mutex of db instance for every time when user calls `Write`. When RocksDB schedules a lot of compaction jobs, it will compete the mutex with write thread and it will hurt the write performance.
## Problem Solution:
I want to use log_write_mutex to replace the global mutex in most case so that we do not acquire it in write-thread unless there is a write-stall event or a write-buffer-full event occur.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7516
Test Plan:
1. make check
2. CI
3. COMPILE_WITH_TSAN=1 make db_stress
make crash_test
make crash_test_with_multiops_wp_txn
make crash_test_with_multiops_wc_txn
make crash_test_with_atomic_flush
Reviewed By: siying
Differential Revision: D36908702
Pulled By: riversand963
fbshipit-source-id: 59b13881f4f5c0a58fd3ca79128a396d9cd98efe
Summary:
`PeriodicWorkScheduler` is a global singleton, which were used to store per-instance setting `record_seqno_time_cadence_`. Move that to db_impl.h which is per-instance.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10383
Reviewed By: siying
Differential Revision: D37928009
Pulled By: jay-zhuang
fbshipit-source-id: e517754f4a9db98798ac04f72033d4b517f734e9
Summary:
Which will be used for tiered storage to preclude hot data from
compacting to the cold tier (the last level).
Internally, adding seqno to time mapping. A periodic_task is scheduled
to record the current_seqno -> current_time in certain cadence. When
memtable flush, the mapping informaiton is stored in sstable property.
During compaction, the mapping information are merged and get the
approximate time of sequence number, which is used to determine if a key
is recently inserted or not and preclude it from the last level if it's
recently inserted (within the `preclude_last_level_data_seconds`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338
Test Plan: CI
Reviewed By: siying
Differential Revision: D37810187
Pulled By: jay-zhuang
fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f
Summary:
**Summary**
Make the mempurge option flag a Mutable Column Family option flag. Therefore, the mempurge feature can be dynamically toggled.
**Motivation**
RocksDB users prefer having the ability to switch features on and off without having to close and reopen the DB. This is particularly important if the feature causes issues and needs to be turned off. Dynamically changing a DB option flag does not seem currently possible.
Moreover, with this new change, the MemPurge feature can be toggled on or off independently between column families, which we see as a major improvement.
**Content of this PR**
This PR includes removal of the `experimental_mempurge_threshold` flag as a DB option flag, and its re-introduction as a `MutableCFOption` flag. I updated the code to handle dynamic changes of the flag (in particular inside the `FlushJob` file). Additionally, this PR includes a new test to demonstrate the capacity of the code to toggle the MemPurge feature on and off, as well as the addition in the `db_stress` module of 2 different mempurge threshold values (0.0 and 1.0) that can be randomly changed with the `set_option_one_in` flag. This is useful to stress test the dynamic changes.
**Benchmarking**
I will add numbers to prove that there is no performance impact within the next 12 hours.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10011
Reviewed By: pdillinger
Differential Revision: D36462357
Pulled By: bjlemaire
fbshipit-source-id: 5e3d63bdadf085c0572ecc2349e7dd9729ce1802
Summary:
https://github.com/facebook/rocksdb/issues/9984 changes the behavior of RocksDB: if logger creation failed during `SanitizeOptions()`,
`DB::Open()` will fail. However, since `SanitizeOptions()` is called in `DBImpl::DBImpl()`, we cannot
directly expose the error to caller without some additional work.
This is a first version proposal which:
- Adds a new member `init_logger_creation_s` to `DBImpl` to store the result of init logger creation
- Checks the error during `DB::Open()` and return it to caller if non-ok
This is not very ideal. We can alternatively move the logger creation logic out of the `SanitizeOptions()`.
Since `SanitizeOptions()` is used in other places, we need to check whether this change breaks anything
in case other callers of `SanitizeOptions()` assumes that a logger should be created.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10223
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D37321717
Pulled By: riversand963
fbshipit-source-id: 58042358a86369d606549dd9938933dd47591c4b
Summary:
There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache.
In this task, we formally introduced the blob source to RocksDB. BlobSource is a new abstraction layer that provides universal access to blobs, regardless of whether they are in the blob cache, secondary cache, or (remote) storage. Depending on user settings, it always fetch blobs from multi-tier cache and storage with minimal cost.
Note: The new `MultiGetBlob()` implementation is not included in the current PR. To go faster, we aim to create a separate PR for it in parallel!
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10198
Reviewed By: ltamasi
Differential Revision: D37294735
Pulled By: gangliao
fbshipit-source-id: 9cb50422d9dd1bc03798501c2778b6c7520c7a1e
Summary:
`FlushWAL(true /* sync */)` is used internally and for manual WAL sync. It had a bug when used together with `track_and_verify_wals_in_manifest` where the synced size tracked in MANIFEST was larger than the number of bytes actually synced.
The bug could be repro'd almost immediately with the following crash test command: `python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --max_bytes_for_level_base=2097152 --target_file_size_base=524288 --duration=3600 --interval=10 --sync_fault_injection=1 --disable_wal=0 --checkpoint_one_in=1000 --max_key=10000 --value_size_mult=33`.
An example error message produced by the above command is shown below. The error sometimes arose from the checkpoint and other times arose from the main stress test DB.
```
Corruption: Size mismatch: WAL (log number: 119) in MANIFEST is 27938 bytes , but actually is 27859 bytes on disk.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10185
Test Plan:
- repro unit test
- the above crash test command no longer finds the error. It does find a different error after a while longer such as "Corruption: WAL file 481 required by manifest but not in directory list"
Reviewed By: riversand963
Differential Revision: D37200993
Pulled By: ajkr
fbshipit-source-id: 98e0071c1a89f4d009888512ed89f9219779ae5f
Summary:
folly DistributedMutex is faster than standard mutexes though
imposes some static obligations on usage. See
https://github.com/facebook/folly/blob/main/folly/synchronization/DistributedMutex.h
for details. Here we use this alternative for our Cache implementations
(especially LRUCache) for better locking performance, when RocksDB is
compiled with folly.
Also added information about which distributed mutex implementation is
being used to cache_bench output and to DB LOG.
Intended follow-up:
* Use DMutex in more places, perhaps improving API to support non-scoped
locking
* Fix linking with fbcode compiler (needs ROCKSDB_NO_FBCODE=1 currently)
Credit: Thanks Siying for reminding me about this line of work that was previously
left unfinished.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10179
Test Plan:
for correctness, existing tests. CircleCI config updated.
Also Meta-internal buck build updated.
For performance, ran simultaneous before & after cache_bench. Out of three
comparison runs, the middle improvement to ops/sec was +21%:
Baseline: USE_CLANG=1 DEBUG_LEVEL=0 make -j24 cache_bench (fbcode
compiler)
```
Complete in 20.201 s; Rough parallel ops/sec = 1584062
Thread ops/sec = 107176
Operation latency (ns):
Count: 32000000 Average: 9257.9421 StdDev: 122412.04
Min: 134 Median: 3623.0493 Max: 56918500
Percentiles: P50: 3623.05 P75: 10288.02 P99: 30219.35 P99.9: 683522.04 P99.99: 7302791.63
```
New: (add USE_FOLLY=1)
```
Complete in 16.674 s; Rough parallel ops/sec = 1919135 (+21%)
Thread ops/sec = 135487
Operation latency (ns):
Count: 32000000 Average: 7304.9294 StdDev: 108530.28
Min: 132 Median: 3777.6012 Max: 91030902
Percentiles: P50: 3777.60 P75: 10169.89 P99: 24504.51 P99.9: 59721.59 P99.99: 1861151.83
```
Reviewed By: anand1976
Differential Revision: D37182983
Pulled By: pdillinger
fbshipit-source-id: a17eb05f25b832b6a2c1356f5c657e831a5af8d1
Summary:
This code is unreachable when `ROCKSDB_LITE` not defined. And it cause build fail on my environment VS2019 16.11.15.
```
-- Selecting Windows SDK version 10.0.19041.0 to target Windows 10.0.19044.
-- The CXX compiler identification is MSVC 19.29.30145.0
-- The C compiler identification is MSVC 19.29.30145.0
-- The ASM compiler identification is MSVC
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10146
Reviewed By: akankshamahajan15
Differential Revision: D37112916
Pulled By: ajkr
fbshipit-source-id: e0b2bf3055d6fac1b3fb40b9f02c4cbae3f82757
Summary:
`PinnableSlice` may hold a handle to a cache value which must be released to correctly decrement the ref-counter. However, when `PinnableSlice` variables are reused, e.g. like this:
```
PinnableSlice pin_slice;
db.Get("foo", &pin_slice);
db.Get("foo", &pin_slice);
```
then the second `Get` simply overwrites the old value in `pin_slice` and the handle returned by the first `Get` is _not_ released.
This PR adds `Reset` calls to the `Get`/`MultiGet` calls that accept `PinnableSlice` arguments to ensure proper cleanup of old values.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10166
Reviewed By: hx235
Differential Revision: D37151632
Pulled By: ajkr
fbshipit-source-id: 9dd3c3288300f560531b843f67db11aeb569a9ff
Summary:
In RocksDB, keys are associated with (internal) sequence numbers which denote when the keys are written
to the database. Sequence numbers in different RocksDB instances are unrelated, thus not comparable.
It is nice if we can associate sequence numbers with their corresponding actual timestamps. One thing we can
do is to support user-defined timestamp, which allows the applications to specify the format of custom timestamps
and encode a timestamp with each key. More details can be found at https://github.com/facebook/rocksdb/wiki/User-defined-Timestamp-%28Experimental%29.
This PR provides a different but complementary approach. We can associate rocksdb snapshots (defined in
https://github.com/facebook/rocksdb/blob/7.2.fb/include/rocksdb/snapshot.h#L20) with **user-specified** timestamps.
Since a snapshot is essentially an object representing a sequence number, this PR establishes a bi-directional mapping between sequence numbers and timestamps.
In the past, snapshots are usually taken by readers. The current super-version is grabbed, and a `rocksdb::Snapshot`
object is created with the last published sequence number of the super-version. You can see that the reader actually
has no good idea of what timestamp to assign to this snapshot, because by the time the `GetSnapshot()` is called,
an arbitrarily long period of time may have already elapsed since the last write, which is when the last published
sequence number is written.
This observation motivates the creation of "timestamped" snapshots on the write path. Currently, this functionality is
exposed only to the layer of `TransactionDB`. Application can tell RocksDB to create a snapshot when a transaction
commits, effectively associating the last sequence number with a timestamp. It is also assumed that application will
ensure any two snapshots with timestamps should satisfy the following:
```
snapshot1.seq < snapshot2.seq iff. snapshot1.ts < snapshot2.ts
```
If the application can guarantee that when a reader takes a timestamped snapshot, there is no active writes going on
in the database, then we also allow the user to use a new API `TransactionDB::CreateTimestampedSnapshot()` to create
a snapshot with associated timestamp.
Code example
```cpp
// Create a timestamped snapshot when committing transaction.
txn->SetCommitTimestamp(100);
txn->SetSnapshotOnNextOperation();
txn->Commit();
// A wrapper API for convenience
Status Transaction::CommitAndTryCreateSnapshot(
std::shared_ptr<TransactionNotifier> notifier,
TxnTimestamp ts,
std::shared_ptr<const Snapshot>* ret);
// Create a timestamped snapshot if caller guarantees no concurrent writes
std::pair<Status, std::shared_ptr<const Snapshot>> snapshot = txn_db->CreateTimestampedSnapshot(100);
```
The snapshots created in this way will be managed by RocksDB with ref-counting and potentially shared with
other readers. We provide the following APIs for readers to retrieve a snapshot given a timestamp.
```cpp
// Return the timestamped snapshot correponding to given timestamp. If ts is
// kMaxTxnTimestamp, then we return the latest timestamped snapshot if present.
// Othersise, we return the snapshot whose timestamp is equal to `ts`. If no
// such snapshot exists, then we return null.
std::shared_ptr<const Snapshot> TransactionDB::GetTimestampedSnapshot(TxnTimestamp ts) const;
// Return the latest timestamped snapshot if present.
std::shared_ptr<const Snapshot> TransactionDB::GetLatestTimestampedSnapshot() const;
```
We also provide two additional APIs for stats collection and reporting purposes.
```cpp
Status TransactionDB::GetAllTimestampedSnapshots(
std::vector<std::shared_ptr<const Snapshot>>& snapshots) const;
// Return timestamped snapshots whose timestamps fall in [ts_lb, ts_ub) and store them in `snapshots`.
Status TransactionDB::GetTimestampedSnapshots(
TxnTimestamp ts_lb,
TxnTimestamp ts_ub,
std::vector<std::shared_ptr<const Snapshot>>& snapshots) const;
```
To prevent the number of timestamped snapshots from growing infinitely, we provide the following API to release
timestamped snapshots whose timestamps are older than or equal to a given threshold.
```cpp
void TransactionDB::ReleaseTimestampedSnapshotsOlderThan(TxnTimestamp ts);
```
Before shutdown, RocksDB will release all timestamped snapshots.
Comparison with user-defined timestamp and how they can be combined:
User-defined timestamp persists every key with a timestamp, while timestamped snapshots maintain a volatile
mapping between snapshots (sequence numbers) and timestamps.
Different internal keys with the same user key but different timestamps will be treated as different by compaction,
thus a newer version will not hide older versions (with smaller timestamps) unless they are eligible for garbage collection.
In contrast, taking a timestamped snapshot at a certain sequence number and timestamp prevents all the keys visible in
this snapshot from been dropped by compaction. Here, visible means (seq < snapshot and most recent).
The timestamped snapshot supports the semantics of reading at an exact point in time.
Timestamped snapshots can also be used with user-defined timestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9879
Test Plan:
```
make check
TEST_TMPDIR=/dev/shm make crash_test_with_txn
```
Reviewed By: siying
Differential Revision: D35783919
Pulled By: riversand963
fbshipit-source-id: 586ad905e169189e19d3bfc0cb0177a7239d1bd4
Summary:
The default implementation of Close() function in Directory/FSDirectory classes returns `NotSupported` status. However, we don't want operations that worked in older versions to begin failing after upgrading when run on FileSystems that have not implemented Directory::Close() yet. So we require the upper level that calls Close() function should properly handle "NotSupported" status instead of treating it as an error status.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10127
Reviewed By: ajkr
Differential Revision: D36971112
Pulled By: littlepig2013
fbshipit-source-id: 100f0e6ad1191e1acc1ba6458c566a11724cf466
Summary:
With this change, when a given read timestamp is smaller than the column-family's full_history_ts_low, Get(), MultiGet() and iterators APIs will return Status::InValidArgument().
Test plan
```
$COMPILE_WITH_ASAN=1 make -j24 all
$./db_with_timestamp_basic_test --gtest_filter=DBBasicTestWithTimestamp.UpdateFullHistoryTsLow
$ make -j24 check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10109
Reviewed By: riversand963
Differential Revision: D36901126
Pulled By: jowlyzhang
fbshipit-source-id: 255feb1a66195351f06c1d0e42acb1ff74527f86
Summary:
If caller specifies a non-null `timestamp` argument in `DB::Get()` or a non-null `timestamps` in `DB::MultiGet()`,
RocksDB will return the timestamps of the point tombstones.
Note: DeleteRange is still unsupported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10056
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D36677956
Pulled By: riversand963
fbshipit-source-id: 2d7af02cc7237b1829cd269086ea895a49d501ae
Summary:
Closing https://github.com/facebook/rocksdb/issues/10080
When `SyncWAL()` calls `MarkLogsSynced()`, even if there is only one active WAL file,
this event should still be added to the MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10087
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D36797580
Pulled By: riversand963
fbshipit-source-id: 24184c9dd606b3939a454ed41de6e868d1519999
Summary:
Currently, the DB directory file descriptor is left open until the deconstruction process (`DB::Close()` does not close the file descriptor). To verify this, comment out the lines between `db_ = nullptr` and `db_->Close()` (line 512, 513, 514, 515 in ldb_cmd.cc) to leak the ``db_'' object, build `ldb` tool and run
```
strace --trace=open,openat,close ./ldb --db=$TEST_TMPDIR --ignore_unknown_options put K1 V1 --create_if_missing
```
There is one directory file descriptor that is not closed in the strace log.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10049
Test Plan: Add a new unit test DBBasicTest.DBCloseAllDirectoryFDs: Open a database with different WAL directory and three different data directories, and all directory file descriptors should be closed after calling Close(). Explicitly call Close() after a directory file descriptor is not used so that the counter of directory open and close should be equivalent.
Reviewed By: ajkr, hx235
Differential Revision: D36722135
Pulled By: littlepig2013
fbshipit-source-id: 07bdc2abc417c6b30997b9bbef1f79aa757b21ff
Summary:
This variable is actually not being used for anything meaningful, thus remove it.
This can make https://github.com/facebook/rocksdb/issues/7516 slightly simpler by reducing the amount of state that must be made lock-free.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10078
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D36779817
Pulled By: riversand963
fbshipit-source-id: ffb0d9ad6149616917ae5e02bb28102cb90fc406
Summary:
This PR fixes the issue of unstable snapshot during external SST file ingestion. Credit ajkr for the following walk through: consider these relevant steps for of IngestExternalFile():
(1) increase seqno while holding mutex -- 677d2b4a8f/db/db_impl/db_impl.cc (L4768)
(2) LogAndApply() -- 677d2b4a8f/db/db_impl/db_impl.cc (L4797-L4798)
(a) write to MANIFEST with mutex released a96a4a2f7b/db/version_set.cc (L4407)
(b) apply to in-memory state with mutex held
A snapshot taken during (2a) will be unstable. In particular, queries against that snapshot will not include data from the ingested file before (2b), and will include data from the ingested file after (2b).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10051
Test Plan:
Added a new unit test: `ExternalSSTFileBasicTest.WriteAfterReopenStableSnapshotWhileLoggingToManifest`.
```
make external_sst_file_basic_test
./external_sst_file_basic_test
```
Reviewed By: ajkr
Differential Revision: D36654033
Pulled By: cbi42
fbshipit-source-id: bf720cca313e0cf211585960f3aff04853a31b96
Summary:
This PR adds timestamp support to a read only DB instance opened as `DBImplReadOnly`. A follow up PR will add the same support to `CompactedDBImpl`.
With this, read only database has these timestamp related APIs:
`ReadOptions.timestamp` : read should return the latest data visible to this specified timestamp
`Iterator::timestamp()` : returns the timestamp associated with the key, value
`DB:Get(..., std::string* timestamp)` : returns the timestamp associated with the key, value in `timestamp`
Test plan (on devserver):
```
$COMPILE_WITH_ASAN=1 make -j24 all
$./db_with_timestamp_basic_test --gtest_filter=DBBasicTestWithTimestamp.ReadOnlyDB*
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10004
Reviewed By: riversand963
Differential Revision: D36434422
Pulled By: jowlyzhang
fbshipit-source-id: 5d949e65b1ffb845758000e2b310fdd4aae71cfb
Summary:
This PR implements a coroutine version of batched MultiGet in order to concurrently read from multiple SST files in a level using async IO, thus reducing the latency of the MultiGet. The API from the user perspective is still synchronous and single threaded, with the RocksDB part of the processing happening in the context of the caller's thread. In Version::MultiGet, the decision is made whether to call synchronous or coroutine code.
A good way to review this PR is to review the first 4 commits in order - de773b3, 70c2f70, 10b50e1, and 377a597 - before reviewing the rest.
TODO:
1. Figure out how to build it in CircleCI (requires some dependencies to be installed)
2. Do some stress testing with coroutines enabled
No regression in synchronous MultiGet between this branch and main -
```
./db_bench -use_existing_db=true --db=/data/mysql/rocksdb/prefix_scan -benchmarks="readseq,multireadrandom" -key_size=32 -value_size=512 -num=5000000 -batch_size=64 -multiread_batched=true -use_direct_reads=false -duration=60 -ops_between_duration_checks=1 -readonly=true -adaptive_readahead=true -threads=16 -cache_size=10485760000 -async_io=false -multiread_stride=40000 -statistics
```
Branch - ```multireadrandom : 4.025 micros/op 3975111 ops/sec 60.001 seconds 238509056 operations; 2062.3 MB/s (14767808 of 14767808 found)```
Main - ```multireadrandom : 3.987 micros/op 4013216 ops/sec 60.001 seconds 240795392 operations; 2082.1 MB/s (15231040 of 15231040 found)```
More benchmarks in various scenarios are given below. The measurements were taken with ```async_io=false``` (no coroutines) and ```async_io=true``` (use coroutines). For an IO bound workload (with every key requiring an IO), the coroutines version shows a clear benefit, being ~2.6X faster. For CPU bound workloads, the coroutines version has ~6-15% higher CPU utilization, depending on how many keys overlap an SST file.
1. Single thread IO bound workload on remote storage with sparse MultiGet batch keys (~1 key overlap/file) -
No coroutines - ```multireadrandom : 831.774 micros/op 1202 ops/sec 60.001 seconds 72136 operations; 0.6 MB/s (72136 of 72136 found)```
Using coroutines - ```multireadrandom : 318.742 micros/op 3137 ops/sec 60.003 seconds 188248 operations; 1.6 MB/s (188248 of 188248 found)```
2. Single thread CPU bound workload (all data cached) with ~1 key overlap/file -
No coroutines - ```multireadrandom : 4.127 micros/op 242322 ops/sec 60.000 seconds 14539384 operations; 125.7 MB/s (14539384 of 14539384 found)```
Using coroutines - ```multireadrandom : 4.741 micros/op 210935 ops/sec 60.000 seconds 12656176 operations; 109.4 MB/s (12656176 of 12656176 found)```
3. Single thread CPU bound workload with ~2 key overlap/file -
No coroutines - ```multireadrandom : 3.717 micros/op 269000 ops/sec 60.000 seconds 16140024 operations; 139.6 MB/s (16140024 of 16140024 found)```
Using coroutines - ```multireadrandom : 4.146 micros/op 241204 ops/sec 60.000 seconds 14472296 operations; 125.1 MB/s (14472296 of 14472296 found)```
4. CPU bound multi-threaded (16 threads) with ~4 key overlap/file -
No coroutines - ```multireadrandom : 4.534 micros/op 3528792 ops/sec 60.000 seconds 211728728 operations; 1830.7 MB/s (12737024 of 12737024 found) ```
Using coroutines - ```multireadrandom : 4.872 micros/op 3283812 ops/sec 60.000 seconds 197030096 operations; 1703.6 MB/s (12548032 of 12548032 found) ```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9968
Reviewed By: akankshamahajan15
Differential Revision: D36348563
Pulled By: anand1976
fbshipit-source-id: c0ce85a505fd26ebfbb09786cbd7f25202038696
Summary:
ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955
Test Plan: Watch CI tests
Reviewed By: riversand963
Differential Revision: D36176799
fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471
Summary:
dont -> don't
refered -> referred
This is a re-run of PR#7785 and acc9679 since these typos keep coming back.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9653
Reviewed By: jay-zhuang
Differential Revision: D34879593
fbshipit-source-id: d7631fb779ea0129beae92abfb838038e60790f8
Summary:
Right now we still don't fully use std::numeric_limits but use a macro, mainly for supporting VS 2013. Right now we only support VS 2017 and up so it is not a problem. The code comment claims that MinGW still needs it. We don't have a CI running MinGW so it's hard to validate. since we now require C++17, it's hard to imagine MinGW would still build RocksDB but doesn't support std::numeric_limits<>.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9954
Test Plan: See CI Runs.
Reviewed By: riversand963
Differential Revision: D36173954
fbshipit-source-id: a35a73af17cdcae20e258cdef57fcf29a50b49e0
Summary:
`VerifyChecksum()` does not specify `largest_seqno` when creating a `TableReader`. As a result, the `TableReader` uses the `TableReaderOptions` default value (0) for `largest_seqno`. This causes the following error when the file has a nonzero global seqno in its properties:
```
Corruption: An external sst file with version 2 have global seqno property with value , while largest seqno in the file is 0
```
This PR fixes this by specifying `largest_seqno` in `VerifyChecksumInternal` with `largest_seqno` from the file metadata.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9919
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D36028824
Pulled By: cbi42
fbshipit-source-id: 428d028a79386f46ef97bb6b6051dc76c83e1f2b
