Summary:
The properties meta-block should come at the end since we always need to
read it when opening a file, unlike index/filter/other meta-blocks, which
are sometimes read depending on the user's configuration. This ordering
will allow us to (in a future PR) do a small readahead on the end of the file
to read properties and meta-index blocks with one I/O.
The bulk of this PR is a refactoring of the `BlockBasedTableBuilder::Finish`
function. It was previously too large with inconsistent error handling, which
made it difficult to change. So I broke it up into one function per meta-block
write, and tried to make error handling consistent within those functions.
Then reordering the metablocks was trivial -- just reorder the calls to these
helper functions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4158
Differential Revision: D8921705
Pulled By: ajkr
fbshipit-source-id: 96c9cc3182eb1adf11af46adab79dbeba7b12fcc
Summary:
In all cases during `BlockBasedTable::Open`, we issue at least three read requests to the file's tail: (1) footer, (2) metaindex block, and (3) properties block. Depending on the config, we may also read other metablocks like filter and index.
This PR issues smaller readahead when we expect to do only the three necessary reads mentioned above. Then, 4KB should be enough (ignoring the case where there are lots of user-defined properties). We can keep doing 512KB readahead when additional reads are expected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4159
Differential Revision: D8924002
Pulled By: ajkr
fbshipit-source-id: cfc713275de4d05ce11f18571f1d72e27ccd3356
Summary:
Refactor IndexBlockIter to reduce conditional branches on key_includes_seq_. IndexBlockIter::Prev is also separated from DataBlockIter::Prev, not to cache the prev entries as they are of less importance when iterating over the index block.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4141
Differential Revision: D8866437
Pulled By: maysamyabandeh
fbshipit-source-id: fdac76880426fc2be7d3c6354c09ab98f6657d4b
Summary:
Some logic only related to IndexBlockIter is separated from BlockIter to IndexBlockIter. This is done by writing an exclusive Seek() and SeekForPrev() for DataBlockIter, and all metadata block iter and tombstone block iter now use data block iter. Dealing with the BinarySeek() sharing problem by passing in the comparator to use.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4136
Reviewed By: maysamyabandeh
Differential Revision: D8859673
Pulled By: siying
fbshipit-source-id: 703e5e6824b82b7cbf4721f3594b94127797ca9e
Summary:
Fixes#3391.
This change adds a `DeleteRange` method to `SstFileWriter` and adds
support for ingesting SSTs with range deletion tombstones. This is
important for applications that need to atomically ingest SSTs while
clearing out any existing keys in a given key range.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3778
Differential Revision: D8821836
Pulled By: anand1976
fbshipit-source-id: ca7786c1947ff129afa703dab011d524c7883844
Summary:
The patch makes sure that two parallel test threads will operate on different db paths. This enables using open source tools such as gtest-parallel to run the tests of a file in parallel.
Example: ``` ~/gtest-parallel/gtest-parallel ./table_test```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4135
Differential Revision: D8846653
Pulled By: maysamyabandeh
fbshipit-source-id: 799bad1abb260e3d346bcb680d2ae207a852ba84
Summary:
- Avoid `strdup` to use jemalloc on Windows
- Use `size_t` for consistency
- Add GCC 8 to Travis
- Add CMAKE_BUILD_TYPE=Release to Travis
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3433
Differential Revision: D6837948
Pulled By: sagar0
fbshipit-source-id: b8543c3a4da9cd07ee9a33f9f4623188e233261f
Summary:
BlockIter is getting crowded including details that specific only to either index or data blocks. The patch moves down such details to DataBlockIter and IndexBlockIter, both inheriting from BlockIter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4121
Differential Revision: D8816832
Pulled By: maysamyabandeh
fbshipit-source-id: d492e74155c11d8a0c1c85cd7ee33d24c7456197
Summary:
Run the basic range deletion tests against the standard set of
configurations. This testing exposed that files with hash indexes and
partitioned indexes were not handling the case where the file contained
only range deletions--i.e., where the index was empty.
Additionally file a TODO about the fact that range deletions are broken
when allow_mmap_reads = true is set.
/cc ajkr nvanbenschoten
Best viewed with ?w=1: https://github.com/facebook/rocksdb/pull/4021/files?w=1
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4021
Differential Revision: D8811860
Pulled By: ajkr
fbshipit-source-id: 3cc07e6d6210a2a00b932866481b3d5c59775343
Summary:
This was caught by crash test, and the following is a simple way to reproduce it and verify the fix.
One way to trigger this code path is to use the following configuration:
- Compress SST file
- Enable direct IO and prefetch buffer
- Do NOT use compressed block cache
Closes https://github.com/facebook/rocksdb/pull/4096
Differential Revision: D8742009
Pulled By: riversand963
fbshipit-source-id: f13381078bbb0dce92f60bd313a78ab602bcacd2
Summary:
Increase the size of each shard so that the number of cache hit/miss match
expectation. Otherwise FilterBlockInBlockCache test will fail.
Closes https://github.com/facebook/rocksdb/pull/4090
Differential Revision: D8736158
Pulled By: riversand963
fbshipit-source-id: 5cdbc06b02390389fd5b72a6d251d88949ad3d91
Summary:
We can have prefetch_index without prefetch_filter but not the other way around. The assert statement is fixed.
Closes https://github.com/facebook/rocksdb/pull/4077
Differential Revision: D8694472
Pulled By: maysamyabandeh
fbshipit-source-id: ccd2804d9d9cdafb1c3e65062c7bc38603e69004
Summary:
Currently the block cache is charged only by the size of the raw data block and excludes the overhead of the c++ objects that contain the raw data block. The patch improves the accuracy of the charge by including the c++ object overhead into it.
Closes https://github.com/facebook/rocksdb/pull/4073
Differential Revision: D8686552
Pulled By: maysamyabandeh
fbshipit-source-id: 8472f7fc163c0644533bc6942e20cdd5725f520f
Summary:
with https://github.com/facebook/rocksdb/pull/3601 and https://github.com/facebook/rocksdb/pull/3899, `prefix_extractor_` is not really being used in block based filter and full filter's version of `PrefixMayMatch` because now `prefix_extractor` is passed as an argument. Also it is now possible that prefix_extractor_ may be initialized to nullptr when a non-standard prefix_extractor is used and also for ROCKSDB_LITE. Removing these checks should not break any existing tests.
Closes https://github.com/facebook/rocksdb/pull/4067
Differential Revision: D8669002
Pulled By: miasantreble
fbshipit-source-id: 0e701ba912b8a26734fadb72d15bb1b266b6176a
Summary:
…ression
For `CompressionType` we have options `compression` and `bottommost_compression`. Thus, to make the compression options consitent with the compression type when bottommost_compression is enabled, we add the bottommost_compression_opts
Closes https://github.com/facebook/rocksdb/pull/3985
Reviewed By: riversand963
Differential Revision: D8385911
Pulled By: zhichao-cao
fbshipit-source-id: 07bc533dd61bcf1cef5927d8d62901c13d38d5fc
Summary:
https://github.com/facebook/rocksdb/pull/3881 fixed a bug where PinnableSlice pin mmap files which could be deleted with background compaction. This is however a non-issue for ReadOnlyDB when there is no compaction running and max_open_files is -1. This patch reenables the pinning feature for that case.
Closes https://github.com/facebook/rocksdb/pull/4053
Differential Revision: D8662546
Pulled By: maysamyabandeh
fbshipit-source-id: 402962602eb0f644e17822748332999c3af029fd
Summary:
This is implemented by extending ReadCallback with another function `MaxUnpreparedSequenceNumber` which returns the largest visible sequence number for the current transaction, if there is uncommitted data written to DB. Otherwise, it returns zero, indicating no uncommitted data.
There are the places where reads had to be modified.
- Get and Seek/Next was just updated to seek to max(snapshot_seq, MaxUnpreparedSequenceNumber()) instead, and iterate until a key was visible.
- Prev did not need need updates since it did not use the Seek to sequence number optimization. Assuming that locks were held when writing unprepared keys, and ValidateSnapshot runs, there should only be committed keys and unprepared keys of the current transaction, all of which are visible. Prev will simply iterate to get the last visible key.
- Reseeking to skip keys optimization was also disabled for write unprepared, since it's possible to hit the max_skip condition even while reseeking. There needs to be some way to resolve infinite looping in this case.
Closes https://github.com/facebook/rocksdb/pull/3955
Differential Revision: D8286688
Pulled By: lth
fbshipit-source-id: 25e42f47fdeb5f7accea0f4fd350ef35198caafe
Summary:
Add a new table property, rocksdb.num.range-deletions, which tracks the
number of range deletions in a block-based table. Range deletions are no
longer counted in rocksdb.num.entries; as discovered in PR #3778, there
are various code paths that implicitly assume that rocksdb.num.entries
counts only true keys, not range deletions.
/cc ajkr nvanbenschoten
Closes https://github.com/facebook/rocksdb/pull/4016
Differential Revision: D8527575
Pulled By: ajkr
fbshipit-source-id: 92e7edbe78fda53756a558013c9fb496e7764fd7
Summary:
Previously in https://github.com/facebook/rocksdb/pull/3601 bloom filter will only be checked if `prefix_extractor` in the mutable_cf_options matches the one found in the SST file.
This PR relaxes the requirement by checking if all keys in the range [user_key, iterate_upper_bound) all share the same prefix after transforming using the BF in the SST file. If so, the bloom filter is considered compatible and will continue to be looked at.
Closes https://github.com/facebook/rocksdb/pull/3899
Differential Revision: D8157459
Pulled By: miasantreble
fbshipit-source-id: 18d17cba56a1005162f8d5db7a27aba277089c41
Summary:
Pass in `for_compaction` to `BlockBasedTableIterator` via `BlockBasedTableReader::NewIterator`.
In 7103559f49, `for_compaction` was set in `BlockBasedTable::Rep` via `BlockBasedTable::SetupForCompaction`. In hindsight it was not the right decision; it also caused TSAN to complain.
Closes https://github.com/facebook/rocksdb/pull/4048
Differential Revision: D8601056
Pulled By: sagar0
fbshipit-source-id: 30127e898c15c38c1080d57710b8c5a6d64a0ab3
Summary:
Top-level index in partitioned index/filter blocks are small and could be pinned in memory. So far we use that by cache_index_and_filter_blocks to false. This however make it difficult to keep account of the total memory usage. This patch introduces pin_top_level_index_and_filter which in combination with cache_index_and_filter_blocks=true keeps the top-level index in cache and yet pinned them to avoid cache misses and also cache lookup overhead.
Closes https://github.com/facebook/rocksdb/pull/4037
Differential Revision: D8596218
Pulled By: maysamyabandeh
fbshipit-source-id: 3a5f7f9ca6b4b525b03ff6bd82354881ae974ad2
Summary:
This PR extends the improvements in #3282 to also work when using Direct IO.
We see **4.5X performance improvement** in seekrandom benchmark doing long range scans, when using direct reads, on flash.
**Description:**
This change improves the performance of iterators doing long range scans (e.g. big/full index or table scans in MyRocks) by using readahead and prefetching additional data on each disk IO, and storing in a local buffer. This prefetching is automatically enabled on noticing more than 2 IOs for the same table file during iteration. The readahead size starts with 8KB and is exponentially increased on each additional sequential IO, up to a max of 256 KB. This helps in cutting down the number of IOs needed to complete the range scan.
**Implementation Details:**
- Used `FilePrefetchBuffer` as the underlying buffer to store the readahead data. `FilePrefetchBuffer` can now take file_reader, readahead_size and max_readahead_size as input to the constructor, and automatically do readahead.
- `FilePrefetchBuffer::TryReadFromCache` can now call `FilePrefetchBuffer::Prefetch` if readahead is enabled.
- `AlignedBuffer` (which is the underlying store for `FilePrefetchBuffer`) now takes a few additional args in `AlignedBuffer::AllocateNewBuffer` to allow copying data from the old buffer.
- Made sure not to re-read partial chunks of data that were already available in the buffer, from device again.
- Fixed a couple of cases where `AlignedBuffer::cursize_` was not being properly kept up-to-date.
**Constraints:**
- Similar to #3282, this gets currently enabled only when ReadOptions.readahead_size = 0 (which is the default value).
- Since the prefetched data is stored in a temporary buffer allocated on heap, this could increase the memory usage if you have many iterators doing long range scans simultaneously.
- Enabled only for user reads, and disabled for compactions. Compaction reads are controlled by the options `use_direct_io_for_flush_and_compaction` and `compaction_readahead_size`, and the current feature takes precautions not to mess with them.
**Benchmarks:**
I used the same benchmark as used in #3282.
Data fill:
```
TEST_TMPDIR=/data/users/$USER/benchmarks/iter ./db_bench -benchmarks=fillrandom -num=1000000000 -compression_type="none" -level_compaction_dynamic_level_bytes
```
Do a long range scan: Seekrandom with large number of nexts
```
TEST_TMPDIR=/data/users/$USER/benchmarks/iter ./db_bench -benchmarks=seekrandom -use_direct_reads -duration=60 -num=1000000000 -use_existing_db -seek_nexts=10000 -statistics -histogram
```
```
Before:
seekrandom : 37939.906 micros/op 26 ops/sec; 29.2 MB/s (1636 of 1999 found)
With this change:
seekrandom : 8527.720 micros/op 117 ops/sec; 129.7 MB/s (6530 of 7999 found)
```
~4.5X perf improvement. Taken on an average of 3 runs.
Closes https://github.com/facebook/rocksdb/pull/3884
Differential Revision: D8082143
Pulled By: sagar0
fbshipit-source-id: 4d7a8561cbac03478663713df4d31ad2620253bb
Summary:
https://github.com/facebook/rocksdb/pull/3764 introduced an optimization feature to skip duplicate prefix entires in full bloom filters. Unfortunately it also introduces a bug in partitioned full filters, where the duplicate prefix should still be inserted if it is in a new partition. The patch fixes the bug by resetting the duplicate detection logic each time a partition is cut.
This bug could result into false negatives, which means that DB could skip an existing key.
Closes https://github.com/facebook/rocksdb/pull/4024
Differential Revision: D8518866
Pulled By: maysamyabandeh
fbshipit-source-id: 044f4d988e606a330ecafd8c79daceb68b8796bf
Summary:
b555ed30a4 makes the BlockBasedTableIterator to be invalidated if the current position if over the upper bound. However, this can bring performance regression to the case of multiple Seek()s hitting the same data block but all out of upper bound.
For example, if an SST file has a data block containing following keys : {a, z}
The user sets the upper bound to be "x", and it executed following queries:
Seek("b")
Seek("c")
Seek("d")
Before the upper bound optimization, these queries always come to this same current data block of the iterator, but now inside each Seek() the data block is read from the block cache but is returned again.
To prevent this regression case, we keep the current data block iterator if it is upper bound.
Closes https://github.com/facebook/rocksdb/pull/4004
Differential Revision: D8463192
Pulled By: siying
fbshipit-source-id: 8710628b30acde7063a097c3184d6c4333a8ef81
Summary:
The Block object assumes contents are uncompressed. Block's constructor tries to read the number of restarts, but does not get an accurate number when its contents are compressed, which is causing issues like https://github.com/facebook/rocksdb/issues/3843.
This PR address this issue by skipping reconstruction of restart points when blocks are known to be compressed. Somehow the restart points can be read directly when Snappy is used and some tests (for example https://github.com/facebook/rocksdb/blob/master/db/db_block_cache_test.cc#L196) expects blocks to be fully constructed even when Snappy compression is used, so here we keep the restart point logic for Snappy.
Closes https://github.com/facebook/rocksdb/pull/3996
Differential Revision: D8416186
Pulled By: miasantreble
fbshipit-source-id: 002c0b62b9e5d89fb7736563d354ce0023c8cb28
Summary:
A recent change pushed down the upper bound checking to child iterators. However, this causes the logic of following sequence wrong:
Seek(key);
if (!Valid()) SeekToLast();
Because !Valid() may be caused by upper bounds, rather than the end of the iterator. In this case SeekToLast() points to totally wrong places. This can cause wrong results, infinite loops, or segfault in some cases.
This sequence is called when changing direction from forward to backward. And this by itself also implicitly happen during reseeking optimization in Prev().
Fix this bug by using SeekForPrev() rather than this sequuence, as what is already done in prefix extrator case.
Closes https://github.com/facebook/rocksdb/pull/3989
Differential Revision: D8385422
Pulled By: siying
fbshipit-source-id: 429e869990cfd2dc389421e0836fc496bed67bb4
Summary:
The sixth argument should be `key_includes_seq` bool, the seventh a `GetContext*`. We were mistakenly passing the `GetContext*` as the sixth argument and relying on the default (nullptr) for the seventh. This would make statistics inaccurate, at least.
Blame: 402b7aa0
Closes https://github.com/facebook/rocksdb/pull/3974
Differential Revision: D8344907
Pulled By: ajkr
fbshipit-source-id: 3ad865a0541d6d30f75dfc726352788118cfe12e
Summary:
Property block will be read sequentially and cached in a heap located
object, so there's no need for restart points. Thus we set the restart
interval to infinity to save space.
Closes https://github.com/facebook/rocksdb/pull/3970
Differential Revision: D8332586
Pulled By: fgwu
fbshipit-source-id: 899c3267832a81d0f084ec2db6b387332f461134
Summary:
BadOptions test creates a temporary db path changed to
table_block_based_bad_options_test to avoid collide with that created by
the PrefixAndWholeKeyTest
Closes https://github.com/facebook/rocksdb/pull/3965
Differential Revision: D8316080
Pulled By: fgwu
fbshipit-source-id: bb8e0fdfdb9abf0e5ce94494b4388cd1622ee032
Summary:
format_version 3 changes the format of index blocks by storing user keys instead of the internal keys, which saves 8-bytes per key. This patch extends the format to top-level indexes in partitioned index/filters.
Closes https://github.com/facebook/rocksdb/pull/3958
Differential Revision: D8294615
Pulled By: maysamyabandeh
fbshipit-source-id: 17666cc16b8076c363972e2308e31547e835f0fe
Summary:
PR https://github.com/facebook/rocksdb/pull/3838 made some changes that triggers lint warnings.
Run `make format` to fix formatting as suggested by siying .
Also piggyback two changes:
1) fix singleton destruction order for windows and posix env
2) fix two clang warnings
Closes https://github.com/facebook/rocksdb/pull/3954
Differential Revision: D8272041
Pulled By: miasantreble
fbshipit-source-id: 7c4fd12bd17aac13534520de0c733328aa3c6c9f
Summary:
This fixes a regression in one of myrocks regression tests (readwhilewriting), introduced in 8bf555f487
This PR changes two lines of code: one of them actually fixes the observed regression, the other is a mostly unrelated small fix that I'm piggy-backing here. EDIT: Nevermind, it fixes one line. More details in inline comments.
Closes https://github.com/facebook/rocksdb/pull/3953
Differential Revision: D8270664
Pulled By: al13n321
fbshipit-source-id: a7d91e196807d1e816551591257c700f70e4ccac
Summary:
format_version=3 changes the format of SST index. This is however not being tested currently since tests only work with the default format_version which is currently 2. The patch extends the most related tests to also test for format_version=3.
Closes https://github.com/facebook/rocksdb/pull/3942
Differential Revision: D8238413
Pulled By: maysamyabandeh
fbshipit-source-id: 915725f55753dd8e9188e802bf471c23645ad035
Summary:
Windows does not have LD_PRELOAD mechanism to override all memory allocation functions and ZSTD makes use of C-tuntime calloc. During flushes and compactions default system allocator fragments and the system slows down considerably.
For builds with jemalloc we employ an advanced ZSTD context creation API that re-directs memory allocation to jemalloc. To reduce the cost of context creation on each block we cache ZSTD context within the block based table builder while a new SST file is being built, this will help all platform builds including those w/o jemalloc. This avoids system allocator fragmentation and improves the performance.
The change does not address random reads and currently on Windows reads with ZSTD regress as compared with SNAPPY compression.
Closes https://github.com/facebook/rocksdb/pull/3838
Differential Revision: D8229794
Pulled By: miasantreble
fbshipit-source-id: 719b622ab7bf4109819bc44f45ec66f0dd3ee80d
Summary:
For iterator reads, a `SuperVersion` is pinned to preserve a snapshot of SST files, and `Block`s are pinned to allow `key()` and `value()` to return pointers directly into a RocksDB memory region. This works for both non-mmap reads, where the block owns the memory region, and mmap reads, where the file owns the memory region.
For point reads with `PinnableSlice`, only the `Block` object is pinned. This works for non-mmap reads because the block owns the memory region, so even if the file is deleted after compaction, the memory region survives. However, for mmap reads, file deletion causes the memory region to which the `PinnableSlice` refers to be unmapped. The result is usually a segfault upon accessing the `PinnableSlice`, although sometimes it returned wrong results (I repro'd this a bunch of times with `db_stress`).
This PR copies the value into the `PinnableSlice` when it comes from mmap'd memory. We can tell whether the `Block` owns its memory using `Block::cachable()`, which is unset when reads do not use the provided buffer as is the case with mmap file reads. When that is false we ensure the result of `Get()` is copied.
This feels like a short-term solution as ideally we'd have the `PinnableSlice` pin the mmap'd memory so we can do zero-copy reads. It seemed hard so I chose this approach to fix correctness in the meantime.
Closes https://github.com/facebook/rocksdb/pull/3881
Differential Revision: D8076288
Pulled By: ajkr
fbshipit-source-id: 31d78ec010198723522323dbc6ea325122a46b08
Summary:
This should resolve the performance regression caused by the unnecessary copying of the shared_ptr.
Closes https://github.com/facebook/rocksdb/pull/3937
Differential Revision: D8232330
Pulled By: miasantreble
fbshipit-source-id: 7885bf7cd190b6f87164c52d6edd328298c13f97
Summary:
DBTestBase::OptionConfig includes the scenarios that unit tests could iterate over them by calling ChangeOptions(). Some of the options have been mistakenly put after kEnd which makes them essentially invisible to ChangeOptions() caller. This patch fixes it except for kUniversalSubcompactions which is left as TODO since it would break some unit tests.
Closes https://github.com/facebook/rocksdb/pull/3935
Differential Revision: D8230748
Pulled By: maysamyabandeh
fbshipit-source-id: edddb8fffcd161af1809fef24798ce118f8593db
Summary:
The very old sst formats do not have table_properties and rep_->table_properties is thus nullptr. The recent patch in https://github.com/facebook/rocksdb/pull/3894 does not check for nullptr and hence makes it backward incompatible. This patch adds the check.
Closes https://github.com/facebook/rocksdb/pull/3918
Differential Revision: D8188638
Pulled By: maysamyabandeh
fbshipit-source-id: b1d986665ecf0b4d1c442adfa8a193b97707d47b
Summary:
Index blocks have the same format as data blocks. The keys therefore similarly to the keys in the data blocks are internal keys, which means that in addition to the user key it also has 8 bytes that encodes sequence number and value type. This extra 8 bytes however is not necessary in index blocks since the index keys act as an separator between two data blocks. The only exception is when the last key of a block and the first key of the next block share the same user key, in which the sequence number is required to act as a separator.
The patch excludes the sequence from index keys only if the above special case does not happen for any of the index keys. It then records that in the property block. The reader looks at the property block to see if it should expect sequence numbers in the keys of the index block.s
Closes https://github.com/facebook/rocksdb/pull/3894
Differential Revision: D8118775
Pulled By: maysamyabandeh
fbshipit-source-id: 915479f028b5799ca91671d67455ecdefbd873bd
Summary:
This was missed in a refactor of `ReadBlockContents` (2f1a3a4).
Closes https://github.com/facebook/rocksdb/pull/3906
Differential Revision: D8172648
Pulled By: ajkr
fbshipit-source-id: 27e453b19795fea974bfed4721105be6f3a12090
Summary:
Please refer to earlier discussion in [issue 3609](https://github.com/facebook/rocksdb/issues/3609).
There was also an alternative fix in [PR 3888](https://github.com/facebook/rocksdb/pull/3888), but the proposed solution requires complex change.
To summarize the cause of the problem. Upon creation of a column family, a `BlockBasedTableFactory` object is `new`ed and encapsulated by a `std::shared_ptr`. Since there is no other `std::shared_ptr` pointing to this `BlockBasedTableFactory`, when the column family is dropped, the `ColumnFamilyData` is `delete`d, causing the destructor of `std::shared_ptr`. Since there is no other `std::shared_ptr`, the underlying memory is also freed.
Later when the db exits, it releases all the table readers, including the table readers that have been operating on the dropped column family. This needs to access the `table_options` owned by `BlockBasedTableFactory` that has already been deleted. Therefore, a segfault is raised.
Previous workaround is to purge all obsolete files upon `ColumnFamilyData` destruction, which leads to a force release of table readers of the dropped column family. However this does not work when the user disables file deletion.
Our solution in this PR is making a copy of `table_options` in `BlockBasedTable::Rep`. This solution increases memory copy and usage, but is much simpler.
Test plan
```
$ make -j16
$ ./column_family_test --gtest_filter=ColumnFamilyTest.CreateDropAndDestroy:ColumnFamilyTest.CreateDropAndDestroyWithoutFileDeletion
```
Expected behavior:
All tests should pass.
Closes https://github.com/facebook/rocksdb/pull/3898
Differential Revision: D8149421
Pulled By: riversand963
fbshipit-source-id: eaecc2e064057ef607fbdd4cc275874f866c3438
Summary:
Currently when ldb built from master tries to open a DB from version 2.2, there will be a segfault because table_properties didn't exist back then.
Closes https://github.com/facebook/rocksdb/pull/3890
Differential Revision: D8100914
Pulled By: miasantreble
fbshipit-source-id: b255e8aedc54695432be2e704839c857dabdd65a
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
`RangeDelAggregator` holds the pointers returned by `BlockIter::key()` and `BlockIter::value()` so requires the data to which they point is pinned. `BlockIter::key()` points into block memory and is guaranteed to be pinned if and only if prefix encoding is disabled (or, equivalently, restart interval is set to one). I think `BlockIter::value()` is always pinned. Added an assert for these and removed the wrong TODO about increasing restart interval, which would enable key prefix encoding and break the assertion.
Closes https://github.com/facebook/rocksdb/pull/3875
Differential Revision: D8063667
Pulled By: ajkr
fbshipit-source-id: 60b5ebcc0cdd610dd6aad9e74a23378793672c41
Summary:
Right now, every Block::NewIterator() reads num_restarts_ from the block, which is already read in Block::Block(). This sometimes cause a CPU cache miss. Although fetching this cacheline can usually benefit follow-up block restart offset reading, as they are close to each other, it's almost free to get ride of this read by storing it in the Block class.
Closes https://github.com/facebook/rocksdb/pull/3869
Differential Revision: D8052493
Pulled By: siying
fbshipit-source-id: 9c72360f0c2d7329f3c198ce4eaedd2bc14b87c1
Summary:
Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are:
* If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted.
* When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not.
However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours).
This PR changes the convention to:
* If status() is not ok, Valid() always returns false.
* Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.)
This does sacrifice the two use cases listed above, but siying said it's ok.
Overview of the changes:
* A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario.
* Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed.
* A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator.
To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types:
Iterators that didn't need changes:
* status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator.
* Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator.
Iterators with changes (see inline comments for details):
* DBIter - an overhaul:
- It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back.
- It had a few code paths silently discarding subiterator's status. The stress test caught a few.
- The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example.
- Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption.
- It used to not reset status on seek for some types of errors.
- Some simplifications and better comments.
- Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer.
* MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status.
* ForwardIterator - changed to the new convention, also slightly simplified.
* ForwardLevelIterator - fixed some bugs and simplified.
* LevelIterator - simplified.
* TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_.
* BlockBasedTableIterator - minor changes.
* BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid.
* PlainTableIterator - some seeks used to not reset status.
* CuckooTableIterator - tiny code cleanup.
* ManagedIterator - fixed some bugs.
* BaseDeltaIterator - changed to the new convention and fixed a bug.
* BlobDBIterator - seeks used to not reset status.
* KeyConvertingIterator - some small change.
Closes https://github.com/facebook/rocksdb/pull/3810
Differential Revision: D7888019
Pulled By: al13n321
fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
Summary:
Now BlockBasedTableIterator directly uses BlockIter. By making BlockIter final, we can prevent unintended virtual function overriding.
Closes https://github.com/facebook/rocksdb/pull/3828
Differential Revision: D7933816
Pulled By: siying
fbshipit-source-id: 026a08cb5c5b6d3d6f44743152b4251da4756f2c
Summary:
Currently HarnessTest.Randomized is already split but some of the splits are faster than the others. The reason is that each split takes a continuous range of the generated args and the test with later args takes longer to finish. The patch evenly split the args among splits in a round robin fashion.
Before:
```
[ OK ] HarnessTest.Randomized1n2 (2278 ms)
[ OK ] HarnessTest.Randomized3n4 (1095 ms)
[ OK ] HarnessTest.Randomized5 (658 ms)
[ OK ] HarnessTest.Randomized6 (1258 ms)
[ OK ] HarnessTest.Randomized7 (6476 ms)
[ OK ] HarnessTest.Randomized8 (8182 ms)
```
After
```
[ OK ] HarnessTest.Randomized1 (2649 ms)
[ OK ] HarnessTest.Randomized2 (2645 ms)
[ OK ] HarnessTest.Randomized3 (2577 ms)
[ OK ] HarnessTest.Randomized4 (2490 ms)
[ OK ] HarnessTest.Randomized5 (2553 ms)
[ OK ] HarnessTest.Randomized6 (2560 ms)
[ OK ] HarnessTest.Randomized7 (2501 ms)
[ OK ] HarnessTest.Randomized8 (2574 ms)
```
Closes https://github.com/facebook/rocksdb/pull/3808
Differential Revision: D7882663
Pulled By: maysamyabandeh
fbshipit-source-id: 09b749a9684b6d7d65466aa4b00c5334a49e833e
Summary:
When the dummy record insertion fails, there is no need to explicitly delete the block as it will be registered for cleanup regardless.
Closes https://github.com/facebook/rocksdb/pull/3688
Differential Revision: D7537741
Pulled By: miasantreble
fbshipit-source-id: fcd3a3d3d382ee8e2c7ced0a4980e683d93a16d6
Summary:
7a6353bd1c prevents empty filter blocks from being written for SST files containing range deletions only. However the assertion this PR removes is still a problem as we could be reading from a DB generated by a RocksDB build without the 7a6353bd1c patch. So remove the assertion. We already don't do this check when `cache_index_and_filter_blocks=false`, so it should be safe.
Closes https://github.com/facebook/rocksdb/pull/3773
Differential Revision: D7769964
Pulled By: ajkr
fbshipit-source-id: 7285762446f2cd2ccf16efd7a988a106fbb0d8d3
Summary:
bc0da4b512 optimized bloom filters by skipping duplicate entires when the whole key and prefixes are both added to the bloom. It however used empty string as the initial value of the last entry added to the bloom. This is incorrect since empty key/prefix are valid entires by themselves. This patch fixes that.
Closes https://github.com/facebook/rocksdb/pull/3776
Differential Revision: D7778803
Pulled By: maysamyabandeh
fbshipit-source-id: d5a065daebee17f9403cac51e9d5626aac87bfbc
Summary:
Currently we rely on FilterBitsBuilder to skip the duplicate keys. It does that by comparing that hash of the key to the hash of the last added entry. This logic breaks however when we have whole_key_filtering mixed with prefix blooms as their addition to FilterBitsBuilder will be interleaved. The patch fixes that by comparing the last whole key and last prefix with the whole key and prefix of the new key respectively and skip the call to FilterBitsBuilder if it is a duplicate.
Closes https://github.com/facebook/rocksdb/pull/3764
Differential Revision: D7744413
Pulled By: maysamyabandeh
fbshipit-source-id: 15df73bbbafdfd754d4e1f42ea07f47b03bc5eb8
Summary:
Currently the partitioned index iterator creates a new ReadOptions which ignores the fill_cache config set to ReadOptions passed by the user. The patch propagates fill_cache from the user's ReadOptions to that of partition index iterator.
Also it clarifies the contract of fill_cache that i) it does not apply to filters, ii) it still charges block cache for the size of the data block, it still pin the block if it is already in the block cache.
Closes https://github.com/facebook/rocksdb/pull/3739
Differential Revision: D7678308
Pulled By: maysamyabandeh
fbshipit-source-id: 53ed96424ae922e499e2d4e3580ddc3f0db893da
Summary:
this PR fixes a few failed contbuild:
1. ASAN memory leak in Block::NewIterator (table/block.cc:429). the proper destruction of first_level_iter_ and second_level_iter_ of two_level_iterator.cc is missing from the code after the refactoring in https://github.com/facebook/rocksdb/pull/3406
2. various unused param errors introduced by https://github.com/facebook/rocksdb/pull/3662
3. updated comment for `ForceReleaseCachedEntry` to emphasize the use of `force_erase` flag.
Closes https://github.com/facebook/rocksdb/pull/3718
Reviewed By: maysamyabandeh
Differential Revision: D7621192
Pulled By: miasantreble
fbshipit-source-id: 476c94264083a0730ded957c29de7807e4f5b146
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
The existing unit test did not set the level so the check for pinned partitioned filter/index being properly released from the block cache was not properly exercised as they only take effect in level 0. As a result a memory leak in pinned partitioned filters was hidden. The patch fix the test as well as the bug.
Closes https://github.com/facebook/rocksdb/pull/3692
Differential Revision: D7559763
Pulled By: maysamyabandeh
fbshipit-source-id: 55eff274945838af983c764a7d71e8daff092e4a
Summary:
Adds two stats to allow us measuring the false positive rate of full filters:
- The total count of positives: rocksdb.bloom.filter.full.positive
- The total count of true positives: rocksdb.bloom.filter.full.true.positive
Not the term "full" in the stat name to indicate that they are meaningful in full filters. block-based filters are to be deprecated soon and supporting it is not worth the the additional cost of if-then-else branches.
Closes#3680
Tested by:
$ ./db_bench -benchmarks=fillrandom -db /dev/shm/rocksdb-tmpdb --num=1000000 -bloom_bits=10
$ ./db_bench -benchmarks="readwhilewriting" -db /dev/shm/rocksdb-tmpdb --statistics -bloom_bits=10 --duration=60 --num=2000000 --use_existing_db 2>&1 > /tmp/full.log
$ grep filter.full /tmp/full.log
rocksdb.bloom.filter.full.positive COUNT : 3628593
rocksdb.bloom.filter.full.true.positive COUNT : 3536026
which gives the false positive rate of 2.5%
Closes https://github.com/facebook/rocksdb/pull/3681
Differential Revision: D7517570
Pulled By: maysamyabandeh
fbshipit-source-id: 630ab1a473afdce404916d297035b6318de4c052
Summary:
Our valgrind continuous test found an interesting leak which got introduced in #3614. We were adding the prefix key before saving the previous prefix start offset, due to which previous prefix offset is always incorrect. Fixed it by saving the the previous sate before adding the key.
Closes https://github.com/facebook/rocksdb/pull/3660
Differential Revision: D7418698
Pulled By: sagar0
fbshipit-source-id: 9933685f943cf2547ed5c553f490035a2fa785cf
Summary:
Provide a block_align option in BlockBasedTableOptions to allow
alignment of SST file data blocks. This will avoid higher
IOPS/throughput load due to < 4KB data blocks spanning 2 4KB pages.
When this option is set to true, the block alignment is set to lower of
block size and 4KB.
Closes https://github.com/facebook/rocksdb/pull/3502
Differential Revision: D7400897
Pulled By: anand1976
fbshipit-source-id: 04cc3bd144e88e3431a4f97604e63ad7a0f06d44
Summary:
b555ed30a4 introduces a regression, which causes blocks always to be pinned in block based iterators. Fix it.
Closes https://github.com/facebook/rocksdb/pull/3582
Differential Revision: D7189534
Pulled By: siying
fbshipit-source-id: 117dc7a03d0a0e360424db02efb366e12da2be03
Summary:
In attempting to build a static lib for use in iOS, I ran in to lots of type errors between uint64_t and size_t. This PR contains the changes I made to get `TARGET_OS=IOS make static_lib` to succeed while also getting Xcode to build successfully with the resulting `librocksdb.a` library imported.
This also compiles for me on macOS and tests fine, but I'm really not sure if I made the correct decisions about where to `static_cast` and where to change types.
Also up for discussion: is iOS worth supporting? Getting the static lib is just part one, we aren't providing any bridging headers or wrappers like the ObjectiveRocks project, it won't be a great experience.
Closes https://github.com/facebook/rocksdb/pull/3503
Differential Revision: D7106457
Pulled By: gfosco
fbshipit-source-id: 82ac2073de7e1f09b91f6b4faea91d18bd311f8e
Summary:
- removed a few unneeded variables
- fused some variable declarations and their assignments
- fixed right-trimming code in string_util.cc to not underflow
- simplifed an assertion
- move non-nullptr check assertion before dereferencing of that pointer
- pass an std::string function parameter by const reference instead of by value (avoiding potential copy)
Closes https://github.com/facebook/rocksdb/pull/3507
Differential Revision: D7004679
Pulled By: sagar0
fbshipit-source-id: 52944952d9b56dfcac3bea3cd7878e315bb563c4
Summary:
Use a customzied BlockBasedTableIterator and LevelIterator to replace current implementations leveraging two-level-iterator. Hope the customized logic will make code easier to understand. As a side effect, BlockBasedTableIterator reduces the allocation for the data block iterator object, and avoid the virtual function call to it, because we can directly reference BlockIter, a final class. Similarly, LevelIterator reduces virtual function call to the dummy iterator iterating the file metadata. It also enabled further optimization.
The upper bound check is also moved from index block to data block. This implementation fits this iterator better. After the change, forwared iterator is slightly optimized to ensure we trim those iterators.
The two-level-iterator now is only used by partitioned index, so it is simplified.
Closes https://github.com/facebook/rocksdb/pull/3406
Differential Revision: D6809041
Pulled By: siying
fbshipit-source-id: 7da3b9b1d3c8e9d9405302c15920af1fcaf50ffa
Summary:
`ReadBlockFromFile` uses a stack buffer to hold small data blocks before passing them to the compression library, which outputs uncompressed data in a heap buffer. In the case of `kNoCompression` there is a `memcpy` to copy from stack buffer to heap buffer.
This PR optimizes `ReadBlockFromFile` to skip the stack buffer for files whose blocks are known to be uncompressed. We determine this using the SST file property, "compression_name", if it's available.
Closes https://github.com/facebook/rocksdb/pull/3472
Differential Revision: D6920848
Pulled By: ajkr
fbshipit-source-id: 5c753e804efc178b9229ae5dbe6a4adc32031f07
Summary:
RandomizedHarnessTest enumerates different combinations of test type, compression type, restart interval, etc. For some combinations it takes very long to finish, causing the test to time out in test infrastructure.
This PR split the test input into smaller trunks in the hope that they will fit in the timeout window. Another possibility is to reduce `num_entries` of course
Closes https://github.com/facebook/rocksdb/pull/3467
Differential Revision: D6910235
Pulled By: miasantreble
fbshipit-source-id: 717246ee5d21a8a48ad82d4d9c04f9051a66f07f
Summary:
Previously `ReadBlockFromFile` for data blocks was only measured when reading a block to populate block cache. This PR adds the corresponding measurements for users who disabled block cache.
Closes https://github.com/facebook/rocksdb/pull/3442
Differential Revision: D6848671
Pulled By: ajkr
fbshipit-source-id: bb4bbe1797fa2cc1d9a5bad44891af2b55384b41
Summary:
ReadOptions.fill_cache is set in compaction inputs and can be set by users in their queries too. It tells RocksDB not to put a data block used to block cache.
The memory used by the data block is, however, not trackable by users.
To make the system more manageable, we can cost the block to block cache while using it, and then release it after using.
Closes https://github.com/facebook/rocksdb/pull/3333
Differential Revision: D6670230
Pulled By: miasantreble
fbshipit-source-id: ab848d3ed286bd081a13ee1903de357b56cbc308
Summary: Grandfather in super old lint issues to make a clean slate for moving forward that allows us to have stronger enforcement on new issues.
Reviewed By: yiwu-arbug
Differential Revision: D6821806
fbshipit-source-id: 22797d31ec58e9eb0255d3b66fedfcfcb0dc127c
Summary:
This change improves the performance of iterators doing long range scans (e.g. big/full table scans in MyRocks) by using readahead and prefetching additional data on each disk IO. This prefetching is automatically enabled on noticing more than 2 IOs for the same table file during iteration. The readahead size starts with 8KB and is exponentially increased on each additional sequential IO, up to a max of 256 KB. This helps in cutting down the number of IOs needed to complete the range scan.
Constraints:
- The prefetched data is stored by the OS in page cache. So this currently works only for non direct-reads use-cases i.e applications which use page cache. (Direct-I/O support will be enabled in a later PR).
- This gets currently enabled only when ReadOptions.readahead_size = 0 (which is the default value).
Thanks to siying for the original idea and implementation.
**Benchmarks:**
Data fill:
```
TEST_TMPDIR=/data/users/$USER/benchmarks/iter ./db_bench -benchmarks=fillrandom -num=1000000000 -compression_type="none" -level_compaction_dynamic_level_bytes
```
Do a long range scan: Seekrandom with large number of nexts
```
TEST_TMPDIR=/data/users/$USER/benchmarks/iter ./db_bench -benchmarks=seekrandom -duration=60 -num=1000000000 -use_existing_db -seek_nexts=10000 -statistics -histogram
```
Page cache was cleared before each experiment with the command:
```
sudo sh -c "echo 3 > /proc/sys/vm/drop_caches"
```
```
Before:
seekrandom : 34020.945 micros/op 29 ops/sec; 32.5 MB/s (1636 of 1999 found)
With this change:
seekrandom : 8726.912 micros/op 114 ops/sec; 126.8 MB/s (5702 of 6999 found)
```
~3.9X performance improvement.
Also verified with strace and gdb that the readahead size is increasing as expected.
```
strace -e readahead -f -T -t -p <db_bench process pid>
```
Closes https://github.com/facebook/rocksdb/pull/3282
Differential Revision: D6586477
Pulled By: sagar0
fbshipit-source-id: 8a118a0ed4594fbb7f5b1cafb242d7a4033cb58c
Summary:
This is a pre-cleaning up before a major block based table iterator refactoring. BlockBasedTable::NewDataBlockIterator() will always return BlockIter. This simplifies the logic and code and enable further refactoring and optimization.
Closes https://github.com/facebook/rocksdb/pull/3398
Differential Revision: D6780165
Pulled By: siying
fbshipit-source-id: 273f7dc896724f682c0118fb69a359d9cc4418b4
Summary:
* Fix DBTest.CompactRangeWithEmptyBottomLevel lite build failure
* Fix DBTest.AutomaticConflictsWithManualCompaction failure introduce by #3366
* Fix BlockBasedTableTest::IndexUncompressed should be disabled if snappy is disabled
* Fix ASAN failure with DBBasicTest::DBClose test
Closes https://github.com/facebook/rocksdb/pull/3373
Differential Revision: D6732313
Pulled By: yiwu-arbug
fbshipit-source-id: 1eb9b9d9a8d795f56188fa9770db9353f6fdedc5
Summary:
Re-use metadata for reading Compression Dictionary on BlockBased
table open, this saves two reads from disk.
This helps to our 999 percentile in 5.6.1 where prefetch buffer is not present.
Closes https://github.com/facebook/rocksdb/pull/3354
Differential Revision: D6695753
Pulled By: ajkr
fbshipit-source-id: bb8acd9e9e66e65b89c548ab8940570ae360333c
Summary:
BlockTest.BlockReadAmpBitmap is too slow and times out in some environments. Speed it up by:
(1) improve the way the verification is done. With this it is 5 times faster
(2) run fewer tests for large blocks. This cut it down by another 10 times.
Now it can finish in similar time as other tests.
Closes https://github.com/facebook/rocksdb/pull/3313
Differential Revision: D6643711
Pulled By: siying
fbshipit-source-id: c2397d666eab5421a78ca87e1e45491e0f832a6d
Summary:
NUMBER_BLOCK_DECOMPRESSED and NUMBER_BLOCK_COMPRESSED are not reported unless the stats level contain detailed timers, which is wrong. They are normal counters. Fix it.
Closes https://github.com/facebook/rocksdb/pull/3263
Differential Revision: D6552519
Pulled By: siying
fbshipit-source-id: 40899ccea7b2856bb39752616657c0bfd432f6f9
Summary:
Some call sites of BlockFetcher create temporary ReadOptions and pass to BlockFetcher. The temporary object will be gone after BlockFetcher construction but BlockFetcher keep its reference, causing stack-use-after-scope. Fixing it.
Closes https://github.com/facebook/rocksdb/pull/3258
Differential Revision: D6547152
Pulled By: yiwu-arbug
fbshipit-source-id: 6b49e9dd46bb72307f5d8f88ea15faacff35b9bc
Summary:
Divide ReadBlockContents() to multiple sub-functions. Maintaining the input and intermediate data in a new class BlockFetcher.
I hope in general it makes the code easier to maintain.
Another motivation to do it is to clearly divide the logic before file reading and after file reading. The refactor will help us evaluate how can we make I/O async in the future.
Closes https://github.com/facebook/rocksdb/pull/3244
Differential Revision: D6520983
Pulled By: siying
fbshipit-source-id: 338d90bc0338472d46be7a7682028dc9114b12e9
Summary:
table/block.cc:
420 }
CID 1396127 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
7. uninit_member: Non-static class member restart_offset_ is not initialized in this constructor nor in any functions that it calls.
421}
table/block_based_table_builder.cc:
CID 1418259 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
7. uninit_member: Non-static class member compressed_cache_key_prefix_size is not initialized in this constructor nor in any functions that it calls.
table/block_based_table_reader.h:
3. uninit_member: Non-static class member index_type is not initialized in this constructor nor in any functions that it calls.
CID 1396147 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
5. uninit_member: Non-static class member hash_index_allow_collision is not initialized in this constructor nor in any functions that it calls.
413 global_seqno(kDisableGlobalSequenceNumber) {}
414
table/cuckoo_table_reader.cc:
55 if (hash_funs == user_props.end()) {
56 status_ = Status::Corruption("Number of hash functions not found");
5. uninit_member: Non-static class member is_last_level_ is not initialized in this constructor nor in any functions that it calls.
7. uninit_member: Non-static class member identity_as_first_hash_ is not initialized in this constructor nor in any functions that it calls.
9. uninit_member: Non-static class member use_module_hash_ is not initialized in this constructor nor in any functions that it calls.
11. uninit_member: Non-static class member num_hash_func_ is not initialized in this constructor nor in any functions that it calls.
13. uninit_member: Non-static class member key_length_ is not initialized in this constructor nor in any functions that it calls.
15. uninit_member: Non-static class member user_key_length_ is not initialized in this constructor nor in any functions that it calls.
17. uninit_member: Non-static class member value_length_ is not initialized in this constructor nor in any functions that it calls.
19. uninit_member: Non-static class member bucket_length_ is not initialized in this constructor nor in any functions that it calls.
21. uninit_member: Non-static class member cuckoo_block_size_ is not initialized in this constructor nor in any functions that it calls.
23. uninit_member: Non-static class member cuckoo_block_bytes_minus_one_ is not initialized in this constructor nor in any functions that it calls.
CID 1322785 (#2 of 2): Uninitialized scalar field (UNINIT_CTOR)
25. uninit_member: Non-static class member table_size_ is not initialized in this constructor nor in any functions that it calls.
57 return;
table/plain_table_index.h:
2. uninit_member: Non-static class member index_size_ is not initialized in this constructor nor in any functions that it calls.
CID 1322801 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
4. uninit_member: Non-static class member sub_index_size_ is not initialized in this constructor nor in any functions that it calls.
128 huge_page_tlb_size_(huge_page_tlb_size) {}
129
Closes https://github.com/facebook/rocksdb/pull/3113
Differential Revision: D6505719
Pulled By: yiwu-arbug
fbshipit-source-id: 38f44d8f9dfefb4c2e25d83b8df25a5201c75618
Summary:
I started adding gflags support for cmake on linux and got frustrated that I'd need to duplicate the build_detect_platform logic, which determines namespace based on attempting compilation. We can do it differently -- use the GFLAGS_NAMESPACE macro if available, and if not, that indicates it's an old gflags version without configurable namespace so we can simply hardcode "google".
Closes https://github.com/facebook/rocksdb/pull/3212
Differential Revision: D6456973
Pulled By: ajkr
fbshipit-source-id: 3e6d5bde3ca00d4496a120a7caf4687399f5d656
Summary:
The ASCII output is almost always useless to me as the first '\0' byte in the key or value causes it to stop printing. Since all characters are already surrounded by spaces, "\ 0" (how we display a backslash followed by a zero) and "\0" (how this PR displays a null terminator) are distinguishable. My assumption is the value of seeing all the bytes outweighs the value of the alignment we had before, where we always had one character followed by one space.
Closes https://github.com/facebook/rocksdb/pull/3203
Differential Revision: D6428651
Pulled By: ajkr
fbshipit-source-id: aafc978a51e9ea029cfe3e763e2bb0e1751b9ccf
Summary:
Problem: Option string accepts only cache_size as parameter for block_cache which is specified as "block_cache=1M".
It doesn't accept other parameters like num_shards etc.
Changes :
1) ParseBlockBasedTableOption in block_based_table_factory is edited to accept cache options in the format "block_cache=<cache_size>:<num_shard_bits>:<strict_capacity_limit>:<high_pri_pool_ratio>".
Options other than cache_size are optional to maintain backward compatibility. The changes are valid for block_cache_compressed as well.
For example, "block_cache=1M:6:true:0.5", "block_cache=1M:6:true", "block_cache=1M:6" and "block_cache=1M" are all valid option strings.
2) Corresponding unit tests are added.
Closes https://github.com/facebook/rocksdb/pull/3108
Differential Revision: D6420997
Pulled By: sagar0
fbshipit-source-id: cdea8b785688d2802907974af27225ccc1c0cd43
Summary:
block_size_deviation is in percentage while the partition size is in bytes. The current code fails to take that into account resulting into very large target size for filter partitions.
Closes https://github.com/facebook/rocksdb/pull/3187
Differential Revision: D6376069
Pulled By: maysamyabandeh
fbshipit-source-id: 276546fc68f50e0da32c462abb46f6cf676db9b2
Summary:
We don't propagate TableProperty::oldest_key_time on compaction and just write the default value to SST files. It is more natural to default the value to 0.
Also revert db_sst_test back to before #2842.
Closes https://github.com/facebook/rocksdb/pull/3079
Differential Revision: D6165702
Pulled By: yiwu-arbug
fbshipit-source-id: ca3ce5928d96ae79a5beb12bb7d8c640a71478a0
Summary:
With FIFO compaction we would like to get the oldest data time for monitoring. The problem is we don't have timestamp for each key in the DB. As an approximation, we expose the earliest of sst file "creation_time" property.
My plan is to override the property with a more accurate value with blob db, where we actually have timestamp.
Closes https://github.com/facebook/rocksdb/pull/2842
Differential Revision: D5770600
Pulled By: yiwu-arbug
fbshipit-source-id: 03833c8f10bbfbee62f8ea5c0d03c0cafb5d853a
