Summary:
Add all status handling in db_properties_test so that it can pass ASSERT_STATUS_CHECKED.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7490
Test Plan: Run the test with ASSERT_STATUS_CHECKED
Reviewed By: jay-zhuang
Differential Revision: D24065382
fbshipit-source-id: e008916155196891478c964df0226545308ca71d
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic
infrastructure mis-merge.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D23177444
fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33
Summary:
We have a number of tests hanging on MacOS and windows due to
mishandling of code for mock sleeps. In addition, the code was in
terrible shape because the same variable (addon_time_) would sometimes
refer to microseconds and sometimes to seconds. One test even assumed it
was nanoseconds but was written to pass anyway.
This has been cleaned up so that DB tests generally use a SpecialEnv
function to mock sleep, for either some number of microseconds or seconds
depending on the function called. But to call one of these, the test must first
call SetMockSleep (precondition enforced with assertion), which also turns
sleeps in RocksDB into mock sleeps. To also removes accounting for actual
clock time, call SetTimeElapseOnlySleepOnReopen, which implies
SetMockSleep (on DB re-open). This latter setting only works by applying
on DB re-open, otherwise havoc can ensue if Env goes back in time with
DB open.
More specifics:
Removed some unused test classes, and updated comments on the general
problem.
Fixed DBSSTTest.GetTotalSstFilesSize using a sync point callback instead
of mock time. For this we have the only modification to production code,
inserting a sync point callback in flush_job.cc, which is not a change to
production behavior.
Removed unnecessary resetting of mock times to 0 in many tests. RocksDB
deals in relative time. Any behaviors relying on absolute date/time are likely
a bug. (The above test DBSSTTest.GetTotalSstFilesSize was the only one
clearly injecting a specific absolute time for actual testing convenience.) Just
in case I misunderstood some test, I put this note in each replacement:
// NOTE: Presumed unnecessary and removed: resetting mock time in env
Strengthened some tests like MergeTestTime, MergeCompactionTimeTest, and
FilterCompactionTimeTest in db_test.cc
stats_history_test and blob_db_test are each their own beast, rather deeply
dependent on MockTimeEnv. Each gets its own variant of a work-around for
TimedWait in a mock time environment. (Reduces redundancy and
inconsistency in stats_history_test.)
Intended follow-up:
Remove TimedWait from the public API of InstrumentedCondVar, and only
make that accessible through Env by passing in an InstrumentedCondVar and
a deadline. Then the Env implementations mocking time can fix this problem
without using sync points. (Test infrastructure using sync points interferes
with individual tests' control over sync points.)
With that change, we can simplify/consolidate the scattered work-arounds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7101
Test Plan: make check on Linux and MacOS
Reviewed By: zhichao-cao
Differential Revision: D23032815
Pulled By: pdillinger
fbshipit-source-id: 7f33967ada8b83011fb54e8279365c008bd6610b
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D22301700
fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Refactoring to consolidate implementation details of legacy
Bloom filters. This helps to organize and document some related,
obscure code.
Also added make/cpp var TEST_CACHE_LINE_SIZE so that it's easy to
compile and run unit tests for non-native cache line size. (Fixed a
related test failure in db_properties_test.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5784
Test Plan:
make check, including Recently added Bloom schema unit tests
(in ./plain_table_db_test && ./bloom_test), and including with
TEST_CACHE_LINE_SIZE=128U and TEST_CACHE_LINE_SIZE=256U. Tested the
schema tests with temporary fault injection into new implementations.
Some performance testing with modified unit tests suggest a small to moderate
improvement in speed.
Differential Revision: D17381384
Pulled By: pdillinger
fbshipit-source-id: ee42586da996798910fc45ac0b6289147f16d8df
Summary:
For our default block cache, each additional entry has extra memory overhead. It include LRUHandle (72 bytes currently) and the cache key (two varint64, file id and offset). The usage is not negligible. For example for block_size=4k, the overhead accounts for an extra 2% memory usage for the cache. The patch charging the cache for the extra usage, reducing untracked memory usage outside block cache. The feature is enabled by default and can be disabled by passing kDontChargeCacheMetadata to the cache constructor.
This PR builds up on https://github.com/facebook/rocksdb/issues/4258
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5797
Test Plan:
- Existing tests are updated to either disable the feature when the test has too much dependency on the old way of accounting the usage or increasing the cache capacity to account for the additional charge of metadata.
- The Usage tests in cache_test.cc are augmented to test the cache usage under kFullChargeCacheMetadata.
Differential Revision: D17396833
Pulled By: maysamyabandeh
fbshipit-source-id: 7684ccb9f8a40ca595e4f5efcdb03623afea0c6f
Summary:
This will allow us to fix history by having the code changes for PR#5784 properly attributed to it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5810
Differential Revision: D17400231
Pulled By: pdillinger
fbshipit-source-id: 2da8b1cdf2533cfedb35b5526eadefb38c291f09
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
We introduced ttl option in CompactionOptionsFIFO when ttl-based file
deletion (compaction) was supported only as part of FIFO Compaction. But
with the extension of ttl semantics even to Level compaction,
CompactionOptionsFIFO.ttl can now be deprecated. Instead we will start
using ColumnFamilyOptions.ttl for FIFO compaction as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4965
Differential Revision: D14072960
Pulled By: sagar0
fbshipit-source-id: c98cc2ae695a28136295787cd88d36a220fc219e
Summary:
- To be consistent with the accounting of other optypes in `TableProperties`, we should count range tombstones in `TableProperties::num_entries` and `TableProperties::num_deletions`.
- Updated assertions in stress test's `OnTableFileCreated` handler to accept files with range tombstones only.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4841
Differential Revision: D13568424
Pulled By: ajkr
fbshipit-source-id: 0139d7806494eda20ece67ec460d2458dbbf6026
Summary:
Choose to preload some files if options.max_open_files != -1. This can slightly narrow the gap of performance between options.max_open_files is -1 and a large number. To avoid a significant regression to DB reopen speed if options.max_open_files != -1. Limit the files to preload in DB open time to 16.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3340
Differential Revision: D6686945
Pulled By: siying
fbshipit-source-id: 8ec11bbdb46e3d0cdee7b6ad5897a09c5a07869f
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
This property can help debug why SST files aren't being deleted. Previously we only had the property "rocksdb.is-file-deletions-enabled". However, even when that returned true, obsolete SSTs may still not be deleted due to the coarse-grained mechanism we use to prevent newly created SSTs from being accidentally deleted. That coarse-grained mechanism uses a lower bound file number for SSTs that should not be deleted, and this property exposes that lower bound.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4618
Differential Revision: D12898179
Pulled By: ajkr
fbshipit-source-id: fe68acc041ddbcc9276bbd48976524d95aafc776
Summary:
Since the number of range deletions are reported in
TableProperties, it is confusing to not report the number of merge
operands and point deletions as top-level properties; they are
accessible through the public API, but since they are not the "main"
properties, they do not appear in aggregated table properties, or the
string representation of table properties.
This change promotes those two property keys to
`rocksdb/table_properties.h`, adds corresponding uint64 members for
them, deprecates the old access methods `GetDeletedKeys()` and
`GetMergeOperands()` (though they are still usable for now), and removes
`InternalKeyPropertiesCollector`. The property key strings are the same
as before this change, so this should be able to read DBs written from older
versions (though I haven't tested this yet).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4594
Differential Revision: D12826893
Pulled By: abhimadan
fbshipit-source-id: 9e4e4fbdc5b0da161c89582566d184101ba8eb68
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the block cache more efficiently. The feature is enabled with using format_version 4.
The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585 rocksdb read-only range=100
Format 3:
19569 rocksdb read-only range=100
Format 4:
19352 rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983
Differential Revision: D8361343
Pulled By: maysamyabandeh
fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
Summary:
Add a new table property, rocksdb.num.range-deletions, which tracks the
number of range deletions in a block-based table. Range deletions are no
longer counted in rocksdb.num.entries; as discovered in PR #3778, there
are various code paths that implicitly assume that rocksdb.num.entries
counts only true keys, not range deletions.
/cc ajkr nvanbenschoten
Closes https://github.com/facebook/rocksdb/pull/4016
Differential Revision: D8527575
Pulled By: ajkr
fbshipit-source-id: 92e7edbe78fda53756a558013c9fb496e7764fd7
Summary:
Add a new DB property to DB::GetProperty(), which returns the option.statistics. Test is updated to pass.
Closes https://github.com/facebook/rocksdb/pull/3966
Differential Revision: D8311139
Pulled By: zhichao-cao
fbshipit-source-id: ea78f4727358c807b0e5a0ea62e09defb10ad9ac
Summary:
Index blocks have the same format as data blocks. The keys therefore similarly to the keys in the data blocks are internal keys, which means that in addition to the user key it also has 8 bytes that encodes sequence number and value type. This extra 8 bytes however is not necessary in index blocks since the index keys act as an separator between two data blocks. The only exception is when the last key of a block and the first key of the next block share the same user key, in which the sequence number is required to act as a separator.
The patch excludes the sequence from index keys only if the above special case does not happen for any of the index keys. It then records that in the property block. The reader looks at the property block to see if it should expect sequence numbers in the keys of the index block.s
Closes https://github.com/facebook/rocksdb/pull/3894
Differential Revision: D8118775
Pulled By: maysamyabandeh
fbshipit-source-id: 915479f028b5799ca91671d67455ecdefbd873bd
Summary:
Add "rocksdb.live-sst-files-size" DB property which only include files of latest version. Existing "rocksdb.total-sst-files-size" include files from all versions and thus include files that's obsolete but not yet deleted. I'm going to use this new property to cap blob db sst + blob files size.
Closes https://github.com/facebook/rocksdb/pull/3548
Differential Revision: D7116939
Pulled By: yiwu-arbug
fbshipit-source-id: c6a52e45ce0f24ef78708156e1a923c1dd6bc79a
Summary:
With FIFO compaction we would like to get the oldest data time for monitoring. The problem is we don't have timestamp for each key in the DB. As an approximation, we expose the earliest of sst file "creation_time" property.
My plan is to override the property with a more accurate value with blob db, where we actually have timestamp.
Closes https://github.com/facebook/rocksdb/pull/2842
Differential Revision: D5770600
Pulled By: yiwu-arbug
fbshipit-source-id: 03833c8f10bbfbee62f8ea5c0d03c0cafb5d853a
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
… headers
https://github.com/facebook/rocksdb/pull/2199 should not reference RocksDB-specific macros (like ROCKSDB_SUPPORT_THREAD_LOCAL in this case) to public headers, `iostats_context.h` and `perf_context.h`. We shouldn't do that because users have to provide these compiler flags when building their binary with RocksDB.
We should hide the thread local global variable inside our implementation and just expose a function api to retrieve these variables. It may break some users for now but good for long term.
make check -j64
Closes https://github.com/facebook/rocksdb/pull/2380
Differential Revision: D5177896
Pulled By: lightmark
fbshipit-source-id: 6fcdfac57f2e2dcfe60992b7385c5403f6dcb390
Summary:
also changed the `>` in the comparison against `level0_file_num_compaction_trigger` into a `>=` since exactly `level0_file_num_compaction_trigger` can trigger a compaction from L0.
Closes https://github.com/facebook/rocksdb/pull/2179
Differential Revision: D4915772
Pulled By: ajkr
fbshipit-source-id: e38fec6253de6f9a40e61734615c6670d84038aa
Summary:
Previously users could set `max_background_flushes=0` to force rocksdb to use a single thread pool for both background flushes and compactions. That'll no longer be possible since I'm going to deprecate `max_background_flushes` and `max_background_compactions` in favor of a single option. This diff introduces a new way to force a single thread pool: when high-pri pool has zero threads, all background jobs will be submitted to low-pri pool.
Note the majority of the code change is adding `Env::GetBackgroundThreads()`, which is necessary to check whether the user has provided a zero-sized thread pool.
Closes https://github.com/facebook/rocksdb/pull/2204
Differential Revision: D4936256
Pulled By: ajkr
fbshipit-source-id: 929a07a0c0705f7766f5339cd013ff74e90d6e01
Summary:
Add a function to allow users to reset internal stats without restarting the DB.
Closes https://github.com/facebook/rocksdb/pull/2167
Differential Revision: D4907939
Pulled By: siying
fbshipit-source-id: ab2dd85b88aabe9380da7485320a1d460d3e1f68
Summary:
Currently level histogram is only printed out for DB stats and for default CF. This is confusing. Change to print for every CF instead.
Closes https://github.com/facebook/rocksdb/pull/2126
Differential Revision: D4865373
Pulled By: siying
fbshipit-source-id: 1c853e0ac66e00120ee931cabc9daf69ccc2d577
Summary:
Fixing some bugs in MockEnv so it be actually used.
Closes https://github.com/facebook/rocksdb/pull/1914
Differential Revision: D4609923
Pulled By: maysamyabandeh
fbshipit-source-id: ca25735
Summary:
This PR is based on nbronson's diff with small
modifications to wire it up with existing interface. Comparing to
previous version, this approach works better for inserting keys in
decreasing order or updating the same key, and impose less restriction
to the prefix extractor.
---- Summary from original diff ----
This diff introduces a single InlineSkipList::Insert that unifies
the existing sequential insert optimization (prev_), concurrent insertion,
and insertion using externally-managed insertion point hints.
There's a deep symmetry between insertion hints (cursors) and the
concurrent algorithm. In both cases we have partial information from
the recent past that is likely but not certain to be accurate. This diff
introduces the struct InlineSkipList::Splice, which encodes predecessor
and successor information in the same form that was previously only used
within a single call to InsertConcurrently. Splice holds information
about an insertion point that can be used to levera
Closes https://github.com/facebook/rocksdb/pull/1561
Differential Revision: D4217283
Pulled By: yiwu-arbug
fbshipit-source-id: 33ee437
Summary:
It is hard to measure acutal memory usage by std containers. Even
providing a custom allocator will miss count some of the usage. Here we
only do a wild guess on its memory usage.
Closes https://github.com/facebook/rocksdb/pull/1511
Differential Revision: D4179945
Pulled By: yiwu-arbug
fbshipit-source-id: 32ab929
Summary:
- Store range tombstones in a separate MemTableRep instantiated with ColumnFamilyOptions::memtable_factory
- MemTable::NewRangeTombstoneIterator() returns a MemTableIterator over the separate MemTableRep
- Part of the read path is not implemented yet (i.e., MemTable::Get())
Test Plan: see unit tests
Reviewers: wanning
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62217
Summary:
I was investigating performance issues in the SstFileWriter and found all of the following:
- The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function.
- In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key.
- The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator.
- The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value.
- The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function.
- BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over.
- Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on.
- FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time.
- Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append().
Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9.
Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas.
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59607
Summary:
The current implementation find the first different byte and try to increment it, if it cannot it return the original key
we can improve this by keep going after the first different byte to find the first non 0xFF byte and increment it
After trying this patch on some logdevice sst files I see decrease in there index block size by 8.5%
Test Plan: existing tests and updated test
Reviewers: yhchiang, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56241
Summary:
This is needed so we can measure compression ratio improvements
achieved by D52287.
The property compares raw data size against the total file size for a given
level. If the level is empty it should return 0.0.
Test Plan: new unit test
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56967
sdong