mirror of https://github.com/facebook/rocksdb.git
86 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Changyu Bi
|
fecb10c2fa |
Improve universal compaction sorted-run trigger (#12477)
Summary: Universal compaction currently uses `level0_file_num_compaction_trigger` for two purposes: 1. the trigger for checking if there is any compaction to do, and 2. the limit on the number of sorted runs. RocksDB will do compaction to keep the number of sorted runs no more than the value of this option. This can make the option inflexible. A value that is too small causes higher write amp: more compactions to reduce the number of sorted runs. A value that is too big delays potential compaction work and causes worse read performance. This PR introduce an option `CompactionOptionsUniversal::max_read_amp` for only the second purpose: to specify the hard limit on the number of sorted runs. For backward compatibility, `max_read_amp = -1` by default, which means to fallback to the current behavior. When `max_read_amp > 0`,`level0_file_num_compaction_trigger` will only serve as a trigger to find potential compaction. When `max_read_amp = 0`, RocksDB will auto-tune the limit on the number of sorted runs. The estimation is based on DB size, write_buffer_size and size_ratio, so it is adaptive to the size change of the DB. See more in `UniversalCompactionBuilder::PickCompaction()`. Alternatively, users now can configure `max_read_amp` to a very big value and keep `level0_file_num_compaction_trigger` small. This will allow `size_ratio` and `max_size_amplification_percent` to control the number of sorted runs. This essentially disables compactions with reason kUniversalSortedRunNum. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12477 Test Plan: * new unit test * existing unit test for default behavior * updated crash test with the new option * benchmark: * Create a DB that is roughly 24GB in the last level. When `max_read_amp = 0`, we estimate that the DB needs 9 levels to avoid excessive compactions to reduce the number of sorted runs. * We then run fillrandom to ingest another 24GB data to compare write amp. * case 1: small level0 trigger: `level0_file_num_compaction_trigger=5, max_read_amp=-1` * write-amp: 4.8 * case 2: auto-tune: `level0_file_num_compaction_trigger=5, max_read_amp=0` * write-amp: 3.6 * case 3: auto-tune with minimal trigger: `level0_file_num_compaction_trigger=1, max_read_amp=0` * write-amp: 3.8 * case 4: hard-code a good value for trigger: `level0_file_num_compaction_trigger=9` * write-amp: 2.8 ``` Case 1: ** Compaction Stats [default] ** Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 0/0 0.00 KB 1.0 0.0 0.0 0.0 22.6 22.6 0.0 1.0 0.0 163.2 141.94 111.10 108 1.314 0 0 0.0 0.0 L45 8/0 1.81 GB 0.0 39.6 11.1 28.5 39.3 10.8 0.0 3.5 209.0 207.3 194.25 191.29 43 4.517 348M 2498K 0.0 0.0 L46 13/0 3.12 GB 0.0 15.3 9.5 5.8 15.0 9.3 0.0 1.6 203.1 199.3 77.13 75.88 16 4.821 134M 2362K 0.0 0.0 L47 19/0 4.68 GB 0.0 15.4 10.5 4.9 14.7 9.8 0.0 1.4 204.0 194.9 77.38 76.15 8 9.673 135M 5920K 0.0 0.0 L48 38/0 9.42 GB 0.0 19.6 11.7 7.9 17.3 9.4 0.0 1.5 206.5 182.3 97.15 95.02 4 24.287 172M 20M 0.0 0.0 L49 91/0 22.70 GB 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.00 0.00 0 0.000 0 0 0.0 0.0 Sum 169/0 41.74 GB 0.0 89.9 42.9 47.0 109.0 61.9 0.0 4.8 156.7 189.8 587.85 549.45 179 3.284 791M 31M 0.0 0.0 Case 2: ** Compaction Stats [default] ** Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 1/0 214.47 MB 1.2 0.0 0.0 0.0 22.6 22.6 0.0 1.0 0.0 164.5 140.81 109.98 108 1.304 0 0 0.0 0.0 L44 0/0 0.00 KB 0.0 1.3 1.3 0.0 1.2 1.2 0.0 1.0 206.1 204.9 6.24 5.98 3 2.081 11M 51K 0.0 0.0 L45 4/0 844.36 MB 0.0 7.1 5.4 1.7 7.0 5.4 0.0 1.3 194.6 192.9 37.41 36.00 13 2.878 62M 489K 0.0 0.0 L46 11/0 2.57 GB 0.0 14.6 9.8 4.8 14.3 9.5 0.0 1.5 193.7 189.8 77.09 73.54 17 4.535 128M 2411K 0.0 0.0 L47 24/0 5.81 GB 0.0 19.8 12.0 7.8 18.8 11.0 0.0 1.6 191.4 181.1 106.19 101.21 9 11.799 174M 9166K 0.0 0.0 L48 38/0 9.42 GB 0.0 19.6 11.8 7.9 17.3 9.4 0.0 1.5 197.3 173.6 101.97 97.23 4 25.491 172M 20M 0.0 0.0 L49 91/0 22.70 GB 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.00 0.00 0 0.000 0 0 0.0 0.0 Sum 169/0 41.54 GB 0.0 62.4 40.3 22.1 81.3 59.2 0.0 3.6 136.1 177.2 469.71 423.94 154 3.050 549M 32M 0.0 0.0 Case 3: ** Compaction Stats [default] ** Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 0/0 0.00 KB 5.0 0.0 0.0 0.0 22.6 22.6 0.0 1.0 0.0 163.8 141.43 111.13 108 1.310 0 0 0.0 0.0 L44 0/0 0.00 KB 0.0 0.8 0.8 0.0 0.8 0.8 0.0 1.0 201.4 200.2 4.26 4.19 2 2.130 7360K 33K 0.0 0.0 L45 4/0 844.38 MB 0.0 6.3 5.0 1.2 6.2 5.0 0.0 1.2 202.0 200.3 31.81 31.50 12 2.651 55M 403K 0.0 0.0 L46 7/0 1.62 GB 0.0 13.3 8.8 4.6 13.1 8.6 0.0 1.5 198.9 195.7 68.72 67.89 17 4.042 117M 1696K 0.0 0.0 L47 24/0 5.81 GB 0.0 21.7 12.9 8.8 20.6 11.8 0.0 1.6 198.5 188.6 112.04 109.97 12 9.336 191M 9352K 0.0 0.0 L48 41/0 10.14 GB 0.0 24.8 13.0 11.8 21.9 10.1 0.0 1.7 198.6 175.6 127.88 125.36 6 21.313 218M 25M 0.0 0.0 L49 91/0 22.70 GB 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.00 0.00 0 0.000 0 0 0.0 0.0 Sum 167/0 41.10 GB 0.0 67.0 40.5 26.4 85.4 58.9 0.0 3.8 141.1 179.8 486.13 450.04 157 3.096 589M 36M 0.0 0.0 Case 4: ** Compaction Stats [default] ** Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 0/0 0.00 KB 0.7 0.0 0.0 0.0 22.6 22.6 0.0 1.0 0.0 158.6 146.02 114.68 108 1.352 0 0 0.0 0.0 L42 0/0 0.00 KB 0.0 1.7 1.7 0.0 1.7 1.7 0.0 1.0 185.4 184.3 9.25 8.96 4 2.314 14M 67K 0.0 0.0 L43 0/0 0.00 KB 0.0 2.5 2.5 0.0 2.5 2.5 0.0 1.0 197.8 195.6 13.01 12.65 4 3.253 22M 202K 0.0 0.0 L44 4/0 844.40 MB 0.0 4.2 4.2 0.0 4.1 4.1 0.0 1.0 188.1 185.1 22.81 21.89 5 4.562 36M 503K 0.0 0.0 L45 13/0 3.12 GB 0.0 7.5 6.5 1.0 7.2 6.2 0.0 1.1 188.7 181.8 40.69 39.32 5 8.138 65M 2282K 0.0 0.0 L46 17/0 4.18 GB 0.0 8.3 7.1 1.2 7.9 6.6 0.0 1.1 192.2 181.8 44.23 43.06 4 11.058 73M 3846K 0.0 0.0 L47 22/0 5.34 GB 0.0 8.9 7.5 1.4 8.2 6.8 0.0 1.1 189.1 174.1 48.12 45.37 3 16.041 78M 6098K 0.0 0.0 L48 27/0 6.58 GB 0.0 9.2 7.6 1.6 8.2 6.6 0.0 1.1 195.2 172.9 48.52 47.11 2 24.262 81M 9217K 0.0 0.0 L49 91/0 22.70 GB 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.00 0.00 0 0.000 0 0 0.0 0.0 Sum 174/0 42.74 GB 0.0 42.3 37.0 5.3 62.4 57.1 0.0 2.8 116.3 171.3 372.66 333.04 135 2.760 372M 22M 0.0 0.0 setup: ./db_bench --benchmarks=fillseq,compactall,waitforcompaction --num=200000000 --compression_type=none --disable_wal=1 --compaction_style=1 --num_levels=50 --target_file_size_base=268435456 --max_compaction_bytes=6710886400 --level0_file_num_compaction_trigger=10 --write_buffer_size=268435456 --seed 1708494134896523 benchmark: ./db_bench --benchmarks=overwrite,waitforcompaction,stats --num=200000000 --compression_type=none --disable_wal=1 --compaction_style=1 --write_buffer_size=268435456 --level0_file_num_compaction_trigger=5 --target_file_size_base=268435456 --use_existing_db=1 --num_levels=50 --writes=200000000 --universal_max_read_amp=-1 --seed=1716488324800233 ``` Reviewed By: ajkr Differential Revision: D55370922 Pulled By: cbi42 fbshipit-source-id: 9be69979126b840d08e93e7059260e76a878bb2a |
|
|
Peter Dillinger
|
13ef21c22e |
default_write_temperature option (#12388)
Summary: Currently SST files that aren't applicable to last_level_temperature nor file_temperature_age_thresholds are written with temperature kUnknown, which is a little weird and doesn't support CF-based tiering. The default_temperature option only affects how kUnknown is interpreted for stats. This change adds a new per-CF option default_write_temperature that determines the temperature of new SST files when those other options do not apply. Also made a change to ignore last_level_temperature with FIFO compaction, because I found that could lead to an infinite loop in compaction. Needed follow-up: Fix temperature handling with external file ingestion Pull Request resolved: https://github.com/facebook/rocksdb/pull/12388 Test Plan: unit tests extended appropriately. (Ignore whitespace changes when reviewing.) Reviewed By: jowlyzhang Differential Revision: D54266574 Pulled By: pdillinger fbshipit-source-id: c9ec9a74dbf22be6e986f77f9689d05fea8ef0bb |
|
|
Andrew Kryczka
|
8e29f243c9 |
No filesystem reads during `Merge()` writes (#12365)
Summary: This occasional filesystem read in the write path has caused user pain. It doesn't seem very useful considering it only limits one component's merge chain length, and only helps merge uncached (i.e., infrequently read) values. This PR proposes allowing `max_successive_merges` to be exceeded when the value cannot be read from in-memory components. I included a rollback flag (`strict_max_successive_merges`) just in case. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12365 Test Plan: "rocksdb.block.cache.data.add" is number of data blocks read from filesystem. Since the benchmark is write-only, compaction is disabled, and flush doesn't read data blocks, any nonzero value means the user write issued the read. ``` $ for s in false true; do echo -n "strict_max_successive_merges=$s: " && ./db_bench -value_size=64 -write_buffer_size=131072 -writes=128 -num=1 -benchmarks=mergerandom,flush,mergerandom -merge_operator=stringappend -disable_auto_compactions=true -compression_type=none -strict_max_successive_merges=$s -max_successive_merges=100 -statistics=true |& grep 'block.cache.data.add COUNT' ; done strict_max_successive_merges=false: rocksdb.block.cache.data.add COUNT : 0 strict_max_successive_merges=true: rocksdb.block.cache.data.add COUNT : 1 ``` Reviewed By: hx235 Differential Revision: D53982520 Pulled By: ajkr fbshipit-source-id: e40f761a60bd601f232417ac0058e4a33ee9c0f4 |
|
|
Changyu Bi
|
5620efc794 |
Remove deprecated option `ignore_max_compaction_bytes_for_input` (#12323)
Summary: The option is introduced in https://github.com/facebook/rocksdb/issues/10835 to allow disabling the new compaction behavior if it's not safe. The option is enabled by default and there has not been a need to disable it. So it should be safe to remove now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12323 Reviewed By: ajkr Differential Revision: D53330336 Pulled By: cbi42 fbshipit-source-id: 36eef4664ac96b3a7ed627c48bd6610b0a7eafc5 |
|
|
Andrew Kryczka
|
f9d45358ca |
Removed `check_flush_compaction_key_order` (#12311)
Summary: `check_flush_compaction_key_order` option was introduced for the key order checking online validation. It gave users the ability to disable the validation without downgrade in case the validation caused inefficiencies or false positives. Over time this validation has shown to be cheap and correct, so the option to disable it can now be removed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12311 Reviewed By: cbi42 Differential Revision: D53233379 Pulled By: ajkr fbshipit-source-id: 1384361104021d6e3e580dce2ec123f9f99ce637 |
|
|
Hui Xiao
|
06e593376c |
Group SST write in flush, compaction and db open with new stats (#11910)
Summary: ## Context/Summary Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity. For that, this PR does the following: - Tag different write IOs by passing down and converting WriteOptions to IOOptions - Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS Some related code refactory to make implementation cleaner: - Blob stats - Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info. - Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write. - Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority - Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification - Build table - TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables - Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder. This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more - Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority ## Test ### db bench Flush ``` ./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100 rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 ``` compaction, db oopen ``` Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279 rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213 rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66 ``` blob stats - just to make sure they aren't broken by this PR ``` Integrated Blob DB Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600 rocksdb.blobdb.blob.file.synced COUNT : 1 rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same) ``` ``` Stacked Blob DB Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876 rocksdb.blobdb.blob.file.synced COUNT : 8 rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same) ``` ### Rehearsal CI stress test Trigger 3 full runs of all our CI stress tests ### Performance Flush ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark; enable_statistics = true Pre-pr: avg 507515519.3 ns 497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908, Post-pr: avg 511971266.5 ns, regressed 0.88% 502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408, ``` Compaction ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 495346098.30 ns 492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846 Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97% 502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007 ``` Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats) ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 3848.10 ns 3814,3838,3839,3848,3854,3854,3854,3860,3860,3860 Post-pr: avg 3874.20 ns, regressed 0.68% 3863,3867,3871,3874,3875,3877,3877,3877,3880,3881 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910 Reviewed By: ajkr Differential Revision: D49788060 Pulled By: hx235 fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff |
|
|
Andrew Kryczka
|
be3bc36811 |
internal_repo_rocksdb (-8794174668376270091) (#12114)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/12114 Reviewed By: jowlyzhang Differential Revision: D51745613 Pulled By: ajkr fbshipit-source-id: 27ca4bda275cab057d3a3ec99f0f92cdb9be5177 |
|
|
Yu Zhang
|
1e77e35d26 |
Add a per column family default temperature option for accounting (#11708)
Summary: Add a column family option `default_temperature` that will be used for file reading accounting purpose, such as io statistics, for files that don't have an explicitly set temperature. This options is not a mutable one, changing its value would require a DB restart. This is to avoid the confusion that had the option being a mutable one, the users may expect it to take effect on all files immediately, while in reality, it would only become effective for SST files opened in the future. This `default_temperature` also just affect accounting during one DB session. It won't be recorded in manifest as the file's temperature and can be different across different DB sessions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11708 Test Plan: ``` make all check ``` Reviewed By: pdillinger Differential Revision: D48375763 Pulled By: jowlyzhang fbshipit-source-id: eb756696c14a694c6e2a93d2bb6f040563194981 |
|
|
Vardhan
|
87a21d08fe |
Add an option to trigger flush when the number of range deletions reach a threshold (#11358)
Summary: Add a mutable column family option `memtable_max_range_deletions`. When non-zero, RocksDB will try to flush the current memtable after it has at least `memtable_max_range_deletions` range deletions. Java API is added and crash test is updated accordingly to randomly enable this option. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11358 Test Plan: * New unit test: `DBRangeDelTest.MemtableMaxRangeDeletions` * Ran crash test `python3 ./tools/db_crashtest.py whitebox --simple --memtable_max_range_deletions=20` and saw logs showing flushed memtables usually with 20 range deletions. Reviewed By: ajkr Differential Revision: D46582680 Pulled By: cbi42 fbshipit-source-id: f23d6fa8d8264ecf0a18d55c113ba03f5e2504da |
|
|
Peter Dillinger
|
206fdea3d9 |
Change internal headers with duplicate names (#11408)
Summary: In IDE navigation I find it annoying that there are two statistics.h files (etc.) and often land on the wrong one. Here I migrate several headers to use the blah.h <- blah_impl.h <- blah.cc idiom. Although clang-format wants "blah.h" to be the top include for "blah.cc", I think overall this is an improvement. No public API changes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11408 Test Plan: existing tests Reviewed By: ltamasi Differential Revision: D45456696 Pulled By: pdillinger fbshipit-source-id: 809d931253f3272c908cf5facf7e1d32fc507373 |
|
|
Peter Dillinger
|
e1d1c50317 |
Organize + modernize ReadOptions (#11430)
Summary: Roughly group ReadOptions into those that apply generally and those that only apply to range scans. Also use field assignment idiom to simplify specification of default values. Also some rearranging to reduce unused padding. sizeof(ReadOptions) was 144 on my system, now 136. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11430 Test Plan: existing tests, no functional change intended Reviewed By: hx235 Differential Revision: D45626508 Pulled By: pdillinger fbshipit-source-id: 227d4158c5123405324f273ded2eb9d8bce86364 |
|
|
Hui Xiao
|
151242ce46 |
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288)
Summary:
**Context:**
The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them.
**Summary**
- Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros`
- Fixed the default histogram in `RandomAccessFileReader`
- New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader`
- Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288
Test Plan:
- **Stress test**
- **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob)
- May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads.
```
./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10)
```
```
// BlockBasedTable
rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805
rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116
rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689
// PlainTable
Does not apply
```
- **Db bench 2: performance**
**Read**
SETUP: db with 900 files
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none
```run till convergence
```
./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3
```
Pre-change
`readrandom [AVG 60 runs] : 21568 (± 248) ops/sec`
Post-change (no regression, -0.3%)
`readrandom [AVG 60 runs] : 21486 (± 236) ops/sec`
**Compaction/Flush**run till convergence
```
./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none
rocksdb.sst.read.micros COUNT : 33820
rocksdb.sst.read.flush.micros COUNT : 1800
rocksdb.sst.read.compaction.micros COUNT : 32020
```
Pre-change
`fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec`
Post-change (no regression, ~-0.4%)
`fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec`
Reviewed By: ajkr
Differential Revision: D44007011
Pulled By: hx235
fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
|
|
|
Yu Zhang
|
647cd73674 |
Initial add UDT in memtable only option (#11362)
Summary: This option is immutable through the life time of the DB open. For now, updating its value between different DB open sessions is also a non compatible change. When I work on support for updating comparator, the type of updates accepted for this option will be supported then. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11362 Test Plan: `make check` Reviewed By: ltamasi Differential Revision: D44873870 Pulled By: jowlyzhang fbshipit-source-id: aa02094754b58d99abf9af4c9a8108c1350254cb |
|
|
sdong
|
4720ba4391 |
Remove RocksDB LITE (#11147)
Summary: We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support. Most of changes were done through following comments: unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'` by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147 Test Plan: See CI Reviewed By: pdillinger Differential Revision: D42796341 fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2 |
|
|
Changyu Bi
|
333abe9c55 |
Ignore max_compaction_bytes for compaction input that are within output key-range (#10835)
Summary: When picking compaction input files, we sometimes stop picking a file that is fully included in the output key-range due to hitting max_compaction_bytes. Including these input files can potentially reduce WA at the expense of larger compactions. Larger compaction should be fine as files from input level are usually 10X smaller than files from output level. This PR adds a mutable CF option `ignore_max_compaction_bytes_for_input` that is enabled by default. We can remove this option once we are sure it is safe. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10835 Test Plan: - CI, a unit test on max_compaction_bytes fails before turning this flag off. - Benchmark does not show much difference in WA: `./db_bench --benchmarks=fillrandom,waitforcompaction,stats,levelstats -max_background_jobs=12 -num=2000000000 -target_file_size_base=33554432 --write_buffer_size=33554432` ``` main: ** Compaction Stats [default] ** Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 3/0 91.59 MB 0.8 70.9 0.0 70.9 200.8 129.9 0.0 1.5 25.2 71.2 2886.55 2463.45 9725 0.297 1093M 254K 0.0 0.0 L1 9/0 248.03 MB 1.0 392.0 129.8 262.2 391.7 129.5 0.0 3.0 69.0 68.9 5821.71 5536.90 804 7.241 6029M 5814K 0.0 0.0 L2 87/0 2.50 GB 1.0 537.0 128.5 408.5 533.8 125.2 0.7 4.2 69.5 69.1 7912.24 7323.70 4417 1.791 8299M 36M 0.0 0.0 L3 836/0 24.99 GB 1.0 616.9 118.3 498.7 594.5 95.8 5.2 5.0 66.9 64.5 9442.38 8490.28 4204 2.246 9749M 306M 0.0 0.0 L4 2355/0 62.95 GB 0.3 67.3 37.1 30.2 54.2 24.0 38.9 1.5 72.2 58.2 954.37 821.18 917 1.041 1076M 173M 0.0 0.0 Sum 3290/0 90.77 GB 0.0 1684.2 413.7 1270.5 1775.0 504.5 44.9 13.7 63.8 67.3 27017.25 24635.52 20067 1.346 26G 522M 0.0 0.0 Cumulative compaction: 1774.96 GB write, 154.29 MB/s write, 1684.19 GB read, 146.40 MB/s read, 27017.3 seconds This PR: ** Compaction Stats [default] ** Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 3/0 45.71 MB 0.8 72.9 0.0 72.9 202.8 129.9 0.0 1.6 25.4 70.7 2938.16 2510.36 9741 0.302 1124M 265K 0.0 0.0 L1 8/0 234.54 MB 0.9 384.5 129.8 254.7 384.2 129.6 0.0 3.0 69.0 68.9 5708.08 5424.43 791 7.216 5913M 5753K 0.0 0.0 L2 84/0 2.47 GB 1.0 543.1 128.6 414.5 539.9 125.4 0.7 4.2 69.6 69.2 7989.31 7403.13 4418 1.808 8393M 36M 0.0 0.0 L3 839/0 24.96 GB 1.0 615.6 118.4 497.2 593.2 96.0 5.1 5.0 66.6 64.1 9471.23 8489.31 4193 2.259 9726M 306M 0.0 0.0 L4 2360/0 63.04 GB 0.3 67.6 37.3 30.3 54.4 24.1 38.9 1.5 71.5 57.6 967.30 827.99 907 1.066 1080M 173M 0.0 0.0 Sum 3294/0 90.75 GB 0.0 1683.8 414.2 1269.6 1774.5 504.9 44.8 13.7 63.7 67.1 27074.08 24655.22 20050 1.350 26G 522M 0.0 0.0 Cumulative compaction: 1774.52 GB write, 157.09 MB/s write, 1683.77 GB read, 149.06 MB/s read, 27074.1 seconds ``` Reviewed By: ajkr Differential Revision: D40518319 Pulled By: cbi42 fbshipit-source-id: f4ea614bc0ebefe007ffaf05bb9aec9a8ca25b60 |
|
|
Jay Zhuang
|
c401f285c3 |
Add option `preserve_internal_time_seconds` to preserve the time info (#10747)
Summary: Add option `preserve_internal_time_seconds` to preserve the internal time information. It's mostly for the migration of the existing data to tiered storage ( `preclude_last_level_data_seconds`). When the tiering feature is just enabled, the existing data won't have the time information to decide if it's hot or cold. Enabling this feature will start collect and preserve the time information for the new data. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10747 Reviewed By: siying Differential Revision: D39910141 Pulled By: siying fbshipit-source-id: 25c21638e37b1a7c44006f636b7d714fe7242138 |
|
|
anand76
|
7b11d48444 |
Change MultiGet multi-level optimization to default on (#10671)
Summary: Change the ```ReadOptions.optimize_multiget_for_io``` flag to default on. It doesn't impact regular MultiGet users as its only applicable when ```ReadOptions.async_io``` is also set to true. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10671 Reviewed By: akankshamahajan15 Differential Revision: D39477439 Pulled By: anand1976 fbshipit-source-id: 47abcdbfa69f9bc60422ab68a238b232e085d4ba |
|
|
anand76
|
35cdd3e71e |
MultiGet async IO across multiple levels (#10535)
Summary: This PR exploits parallelism in MultiGet across levels. It applies only to the coroutine version of MultiGet. Previously, MultiGet file reads from SST files in the same level were parallelized. With this PR, MultiGet batches with keys distributed across multiple levels are read in parallel. This is accomplished by splitting the keys not present in a level (determined by bloom filtering) into a separate batch, and processing the new batch in parallel with the original batch. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10535 Test Plan: 1. Ensure existing MultiGet unit tests pass, updating them as necessary 2. New unit tests - TODO 3. Run stress test - TODO No noticeable regression (<1%) without async IO - Without PR: `multireadrandom : 7.261 micros/op 1101724 ops/sec 60.007 seconds 66110936 operations; 571.6 MB/s (8168992 of 8168992 found)` With PR: `multireadrandom : 7.305 micros/op 1095167 ops/sec 60.007 seconds 65717936 operations; 568.2 MB/s (8271992 of 8271992 found)` For a fully cached DB, but with async IO option on, no regression observed (<1%) - Without PR: `multireadrandom : 5.201 micros/op 1538027 ops/sec 60.005 seconds 92288936 operations; 797.9 MB/s (11540992 of 11540992 found) ` With PR: `multireadrandom : 5.249 micros/op 1524097 ops/sec 60.005 seconds 91452936 operations; 790.7 MB/s (11649992 of 11649992 found) ` Reviewed By: akankshamahajan15 Differential Revision: D38774009 Pulled By: anand1976 fbshipit-source-id: c955e259749f1c091590ade73105b3ee46cd0007 |
|
|
Gang Liao
|
ec4ebeff30 |
Support prepopulating/warming the blob cache (#10298)
Summary: Many workloads have temporal locality, where recently written items are read back in a short period of time. When using remote file systems, this is inefficient since it involves network traffic and higher latencies. Because of this, we would like to support prepopulating the blob cache during flush. This task is a part of https://github.com/facebook/rocksdb/issues/10156 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10298 Reviewed By: ltamasi Differential Revision: D37908743 Pulled By: gangliao fbshipit-source-id: 9feaed234bc719d38f0c02975c1ad19fa4bb37d1 |
|
|
Jay Zhuang
|
a3acf2ef87 |
Add seqno to time mapping (#10338)
Summary: Which will be used for tiered storage to preclude hot data from compacting to the cold tier (the last level). Internally, adding seqno to time mapping. A periodic_task is scheduled to record the current_seqno -> current_time in certain cadence. When memtable flush, the mapping informaiton is stored in sstable property. During compaction, the mapping information are merged and get the approximate time of sequence number, which is used to determine if a key is recently inserted or not and preclude it from the last level if it's recently inserted (within the `preclude_last_level_data_seconds`). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338 Test Plan: CI Reviewed By: siying Differential Revision: D37810187 Pulled By: jay-zhuang fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f |
|
|
Baptiste Lemaire
|
5879053fd0 |
Dynamically changeable `MemPurge` option (#10011)
Summary: **Summary** Make the mempurge option flag a Mutable Column Family option flag. Therefore, the mempurge feature can be dynamically toggled. **Motivation** RocksDB users prefer having the ability to switch features on and off without having to close and reopen the DB. This is particularly important if the feature causes issues and needs to be turned off. Dynamically changing a DB option flag does not seem currently possible. Moreover, with this new change, the MemPurge feature can be toggled on or off independently between column families, which we see as a major improvement. **Content of this PR** This PR includes removal of the `experimental_mempurge_threshold` flag as a DB option flag, and its re-introduction as a `MutableCFOption` flag. I updated the code to handle dynamic changes of the flag (in particular inside the `FlushJob` file). Additionally, this PR includes a new test to demonstrate the capacity of the code to toggle the MemPurge feature on and off, as well as the addition in the `db_stress` module of 2 different mempurge threshold values (0.0 and 1.0) that can be randomly changed with the `set_option_one_in` flag. This is useful to stress test the dynamic changes. **Benchmarking** I will add numbers to prove that there is no performance impact within the next 12 hours. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10011 Reviewed By: pdillinger Differential Revision: D36462357 Pulled By: bjlemaire fbshipit-source-id: 5e3d63bdadf085c0572ecc2349e7dd9729ce1802 |
|
|
Gang Liao
|
cba398df8a |
Add blob cache option in the column family options (#10155)
Summary: There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache. This PR is a part of https://github.com/facebook/rocksdb/issues/10156 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10155 Reviewed By: ltamasi Differential Revision: D37150819 Pulled By: gangliao fbshipit-source-id: b807c7916ea5d411588128f8e22a49f171388fe2 |
|
|
Gang Liao
|
e6432dfd4c |
Make it possible to enable blob files starting from a certain LSM tree level (#10077)
Summary: Currently, if blob files are enabled (i.e. `enable_blob_files` is true), large values are extracted both during flush/recovery (when SST files are written into level 0 of the LSM tree) and during compaction into any LSM tree level. For certain use cases that have a mix of short-lived and long-lived values, it might make sense to support extracting large values only during compactions whose output level is greater than or equal to a specified LSM tree level (e.g. compactions into L1/L2/... or above). This could reduce the space amplification caused by large values that are turned into garbage shortly after being written at the price of some write amplification incurred by long-lived values whose extraction to blob files is delayed. In order to achieve this, we would like to do the following: - Add a new configuration option `blob_file_starting_level` (default: 0) to `AdvancedColumnFamilyOptions` (and `MutableCFOptions` and extend the related logic) - Instantiate `BlobFileBuilder` in `BuildTable` (used during flush and recovery, where the LSM tree level is L0) and `CompactionJob` iff `enable_blob_files` is set and the LSM tree level is `>= blob_file_starting_level` - Add unit tests for the new functionality, and add the new option to our stress tests (`db_stress` and `db_crashtest.py` ) - Add the new option to our benchmarking tool `db_bench` and the BlobDB benchmark script `run_blob_bench.sh` - Add the new option to the `ldb` tool (see https://github.com/facebook/rocksdb/wiki/Administration-and-Data-Access-Tool) - Ideally extend the C and Java bindings with the new option - Update the BlobDB wiki to document the new option. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10077 Reviewed By: ltamasi Differential Revision: D36884156 Pulled By: gangliao fbshipit-source-id: 942bab025f04633edca8564ed64791cb5e31627d |
|
|
Changyu Bi
|
cc23b46da1 |
Support using ZDICT_finalizeDictionary to generate zstd dictionary (#9857)
Summary:
An untrained dictionary is currently simply the concatenation of several samples. The ZSTD API, ZDICT_finalizeDictionary(), can improve such a dictionary's effectiveness at low cost. This PR changes how dictionary is created by calling the ZSTD ZDICT_finalizeDictionary() API instead of creating raw content dictionary (when max_dict_buffer_bytes > 0), and pass in all buffered uncompressed data blocks as samples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9857
Test Plan:
#### db_bench test for cpu/memory of compression+decompression and space saving on synthetic data:
Set up: change the parameter [here](
|
|
|
Akanksha Mahajan
|
49a10feb21 |
Provide implementation to prefetch data asynchronously in FilePrefetchBuffer (#9674)
Summary: In FilePrefetchBuffer if reads are sequential, after prefetching call ReadAsync API to prefetch data asynchronously so that in next prefetching data will be available. Data prefetched asynchronously will be readahead_size/2. It uses two buffers, one for synchronous prefetching and one for asynchronous. In case, the data is overlapping, the data is copied from both buffers to third buffer to make it continuous. This feature is under ReadOptions::async_io and is under experimental. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9674 Test Plan: 1. Add new unit tests 2. Run **db_stress** to make sure nothing crashes. - Normal prefetch without `async_io` ran successfully: ``` export CRASH_TEST_EXT_ARGS=" --async_io=0" make crash_test -j ``` 3. **Run Regressions**. i) Main branch without any change for normal prefetching with async_io disabled: ``` ./db_bench -db=/tmp/prefix_scan_prefetch_main -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 - use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216 ``` ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.0 Date: Thu Mar 17 13:11:34 2022 CPU: 24 * Intel Core Processor (Broadwell) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main] seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found) ``` ii) normal prefetching after changes with async_io disable: ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_withchange -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.0 Date: Thu Mar 17 14:11:31 2022 CPU: 24 * Intel Core Processor (Broadwell) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_withchange] seekrandom : 471347.227 micros/op 2 ops/sec; 348.1 MB/s (255 of 255 found) ``` Reviewed By: anand1976 Differential Revision: D34731543 Pulled By: akankshamahajan15 fbshipit-source-id: 8e23aa93453d5fe3c672b9231ad582f60207937f |
|
|
Hui Xiao
|
42cca28ebb |
Remove deprecated API AdvancedColumnFamilyOptions::rate_limit_delay_max_milliseconds (#9455)
Summary: **Context/Summary:** AdvancedColumnFamilyOptions::rate_limit_delay_max_milliseconds has been marked as deprecated and it's time to actually remove the code. - Keep `soft_rate_limit`/`hard_rate_limit` in `cf_mutable_options_type_info` to prevent throwing `InvalidArgument` in `GetColumnFamilyOptionsFromMap` when reading an option file still with these options (e.g, old option file generated from RocksDB before the deprecation) - Keep `soft_rate_limit`/`hard_rate_limit` in under `OptionsOldApiTest.GetOptionsFromMapTest` to test the case mentioned above. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9455 Test Plan: Rely on my eyeball and CI Reviewed By: ajkr Differential Revision: D33811664 Pulled By: hx235 fbshipit-source-id: 866859427fe710354a90f1095057f80116365ff0 |
|
|
Yanqin Jin
|
d10c5c08d3 |
Remove iter_start_seqnum and preserve_deletes (#9430)
Summary: According to https://github.com/facebook/rocksdb/blob/6.27.fb/db/db_impl/db_impl.cc#L2896:L2911 and https://github.com/facebook/rocksdb/blob/6.27.fb/db/db_impl/db_impl_open.cc#L203:L208, we are going to remove `iter_start_seqnum` and `preserve_deletes` starting from RocksDB 7.0 Pull Request resolved: https://github.com/facebook/rocksdb/pull/9430 Test Plan: make check and CI Reviewed By: ajkr Differential Revision: D33753639 Pulled By: riversand963 fbshipit-source-id: c80aab8e8d8fc33e52472fed524ed703d0ffc8b6 |
|
|
Peter Dillinger
|
5576ded762 |
Add Options::DisableExtraChecks, clarify force_consistency_checks (#9363)
Summary: In response to https://github.com/facebook/rocksdb/issues/9354, this PR adds a way for users to "opt out" of extra checks that can impact peak write performance, which currently only includes force_consistency_checks. I considered including some other options but did not see a db_bench performance difference. Also clarify in comment for force_consistency_checks that it can "slow down saturated writing." Pull Request resolved: https://github.com/facebook/rocksdb/pull/9363 Test Plan: basic coverage in unit tests Using my perf test in https://github.com/facebook/rocksdb/issues/9354 comment, I see force_consistency_checks=true -> 725360 ops/s force_consistency_checks=false -> 783072 ops/s Reviewed By: mrambacher Differential Revision: D33636559 Pulled By: pdillinger fbshipit-source-id: 25bfd006f4844675e7669b342817dd4c6a641e84 |
|
|
Levi Tamasi
|
dc5de45af8 |
Support readahead during compaction for blob files (#9187)
Summary: The patch adds a new BlobDB configuration option `blob_compaction_readahead_size` that can be used to enable prefetching data from blob files during compaction. This is important when using storage with higher latencies like HDDs or remote filesystems. If enabled, prefetching is used for all cases when blobs are read during compaction, namely garbage collection, compaction filters (when the existing value has to be read from a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187 Test Plan: Ran `make check` and the stress/crash test. Reviewed By: riversand963 Differential Revision: D32565512 Pulled By: ltamasi fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d |
|
|
Akanksha Mahajan
|
17ce1ca48b |
Reuse internal auto readhead_size at each Level (expect L0) for Iterations (#9056)
Summary: RocksDB does auto-readahead for iterators on noticing more than two sequential reads for a table file if user doesn't provide readahead_size. The readahead starts at 8KB and doubles on every additional read up to max_auto_readahead_size. However at each level, if iterator moves over next file, readahead_size starts again from 8KB. This PR introduces a new ReadOption "adaptive_readahead" which when set true will maintain readahead_size at each level. So when iterator moves from one file to another, new file's readahead_size will continue from previous file's readahead_size instead of scratch. However if reads are not sequential it will fall back to 8KB (default) with no prefetching for that block. 1. If block is found in cache but it was eligible for prefetch (block wasn't in Rocksdb's prefetch buffer), readahead_size will decrease by 8KB. 2. It maintains readahead_size for L1 - Ln levels. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9056 Test Plan: Added new unit tests Ran db_bench for "readseq, seekrandom, seekrandomwhilewriting, readrandom" with --adaptive_readahead=true and there was no regression if new feature is enabled. Reviewed By: anand1976 Differential Revision: D31773640 Pulled By: akankshamahajan15 fbshipit-source-id: 7332d16258b846ae5cea773009195a5af58f8f98 |
|
|
Levi Tamasi
|
3e1bf771a3 |
Make it possible to force the garbage collection of the oldest blob files (#8994)
Summary: The current BlobDB garbage collection logic works by relocating the valid blobs from the oldest blob files as they are encountered during compaction, and cleaning up blob files once they contain nothing but garbage. However, with sufficiently skewed workloads, it is theoretically possible to end up in a situation when few or no compactions get scheduled for the SST files that contain references to the oldest blob files, which can lead to increased space amp due to the lack of GC. In order to efficiently handle such workloads, the patch adds a new BlobDB configuration option called `blob_garbage_collection_force_threshold`, which signals to BlobDB to schedule targeted compactions for the SST files that keep alive the oldest batch of blob files if the overall ratio of garbage in the given blob files meets the threshold *and* all the given blob files are eligible for GC based on `blob_garbage_collection_age_cutoff`. (For example, if the new option is set to 0.9, targeted compactions will get scheduled if the sum of garbage bytes meets or exceeds 90% of the sum of total bytes in the oldest blob files, assuming all affected blob files are below the age-based cutoff.) The net result of these targeted compactions is that the valid blobs in the oldest blob files are relocated and the oldest blob files themselves cleaned up (since *all* SST files that rely on them get compacted away). These targeted compactions are similar to periodic compactions in the sense that they force certain SST files that otherwise would not get picked up to undergo compaction and also in the sense that instead of merging files from multiple levels, they target a single file. (Note: such compactions might still include neighboring files from the same level due to the need of having a "clean cut" boundary but they never include any files from any other level.) This functionality is currently only supported with the leveled compaction style and is inactive by default (since the default value is set to 1.0, i.e. 100%). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8994 Test Plan: Ran `make check` and tested using `db_bench` and the stress/crash tests. Reviewed By: riversand963 Differential Revision: D31489850 Pulled By: ltamasi fbshipit-source-id: 44057d511726a0e2a03c5d9313d7511b3f0c4eab |
|
|
mrambacher
|
13ae16c315 |
Cleanup includes in dbformat.h (#8930)
Summary: This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead. Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing. Hopefully, this sort of code hygiene cleanup will speed up the builds... Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930 Reviewed By: pdillinger Differential Revision: D31142788 Pulled By: mrambacher fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d |
|
|
Andrew Kryczka
|
d904233d2f |
Limit buffering for collecting samples for compression dictionary (#7970)
Summary: For dictionary compression, we need to collect some representative samples of the data to be compressed, which we use to either generate or train (when `CompressionOptions::zstd_max_train_bytes > 0`) a dictionary. Previously, the strategy was to buffer all the data blocks during flush, and up to the target file size during compaction. That strategy allowed us to randomly pick samples from as wide a range as possible that'd be guaranteed to land in a single output file. However, some users try to make huge files in memory-constrained environments, where this strategy can cause OOM. This PR introduces an option, `CompressionOptions::max_dict_buffer_bytes`, that limits how much data blocks are buffered before we switch to unbuffered mode (which means creating the per-SST dictionary, writing out the buffered data, and compressing/writing new blocks as soon as they are built). It is not strict as we currently buffer more than just data blocks -- also keys are buffered. But it does make a step towards giving users predictable memory usage. Related changes include: - Changed sampling for dictionary compression to select unique data blocks when there is limited availability of data blocks - Made use of `BlockBuilder::SwapAndReset()` to save an allocation+memcpy when buffering data blocks for building a dictionary - Changed `ParseBoolean()` to accept an input containing characters after the boolean. This is necessary since, with this PR, a value for `CompressionOptions::enabled` is no longer necessarily the final component in the `CompressionOptions` string. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7970 Test Plan: - updated `CompressionOptions` unit tests to verify limit is respected (to the extent expected in the current implementation) in various scenarios of flush/compaction to bottommost/non-bottommost level - looked at jemalloc heap profiles right before and after switching to unbuffered mode during flush/compaction. Verified memory usage in buffering is proportional to the limit set. Reviewed By: pdillinger Differential Revision: D26467994 Pulled By: ajkr fbshipit-source-id: 3da4ef9fba59974e4ef40e40c01611002c861465 |
|
|
Levi Tamasi
|
974458891c |
Revert "Turn on memtable bloom filter by default. (#6584)" (#7939)
Summary:
This reverts commit
|
|
|
sdong
|
ee79a28963 |
Turn on memtable bloom filter by default. (#6584)
Summary: Memtable bloom filter is useful in many use cases. A default value on with conservative 1.5% memory can benefit more use cases than use cases impacted. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6584 Test Plan: Run all existing tests. Reviewed By: pdillinger Differential Revision: D20626739 fbshipit-source-id: 1dd45532b932139552519b8c2682bd954550c2f9 |
|
|
Levi Tamasi
|
bbbb5a280d |
Add options for integrated blob GC (#7661)
Summary: This patch simply adds a couple of options that will enable users to configure garbage collection when using the integrated BlobDB implementation. The actual GC logic will be added in a separate step. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7661 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D24906544 Pulled By: ltamasi fbshipit-source-id: ee0e056a712a4b4475cd90de8b27d969bd61b7e1 |
|
|
mrambacher
|
7d472accdc |
Bring the Configurable options together (#5753)
Summary: This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753 Reviewed By: ajkr Differential Revision: D23385030 Pulled By: zhichao-cao fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a |
|
|
Levi Tamasi
|
b9bb59d49d |
Add initial set of options for integrated blob write path (#7280)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/7280 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23195192 Pulled By: ltamasi fbshipit-source-id: 743b382de391963e62ba86119e9fbd0233ea3b3a |
|
|
anand76
|
832b056a30 |
Enable IO timeouts for iterators (#7161)
Summary: Introduce io_timeout in ReadOptions and enabled deadline/io_timeout for Iterators. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7161 Test Plan: New unit tests in db_basic_test Reviewed By: riversand963 Differential Revision: D22687352 Pulled By: anand1976 fbshipit-source-id: 67bbb0e6d7ae80b256589244468494292538c6ec |
|
|
Tomas Kolda
|
cd4592c220 |
SST Partitioner interface that allows to split SST files (#6957)
Summary: SST Partitioner interface that allows to split SST files during compactions. It basically instruct compaction to create a new file when needed. When one is using well defined prefixes and prefixed way of defining tables it is good to define also partitioning so that promotion of some SST file does not cover huge key space on next level (worst case complete space). Pull Request resolved: https://github.com/facebook/rocksdb/pull/6957 Reviewed By: ajkr Differential Revision: D22461239 fbshipit-source-id: 9ce07bba08b3ba89c2d45630520368f704d1316e |
|
|
Akanksha Mahajan
|
bcefc59e9f |
Allow MultiGet users to limit cumulative value size (#6826)
Summary: 1. Add a value_size in read options which limits the cumulative value size of keys read in batches. Once the size exceeds read_options.value_size, all the remaining keys are returned with status Abort without further fetching any key. 2. Add a unit test case MultiGetBatchedValueSizeSimple the reads keys from memory and sst files. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6826 Test Plan: 1. make check -j64 2. Add a new unit test case Reviewed By: anand1976 Differential Revision: D21471483 Pulled By: akankshamahajan15 fbshipit-source-id: dea51b8e76d5d1df38ece8cdb29933b1d798b900 |
|
|
anand76
|
c1ccd6b6af |
Implement deadline support for MultiGet (#6710)
Summary: Initial implementation of ReadOptions.deadline for MultiGet. If the request takes longer than the deadline, the keys not yet found will be returned with Status::TimedOut(). This implementation enforces the deadline in DBImpl, which is fairly high level. Its best effort and may not check the deadline after every key lookup, but may do so after a batch of keys. In subsequent stages, we will extend this to passing a timeout down to the FileSystem. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6710 Test Plan: Add new unit tests Reviewed By: riversand963 Differential Revision: D21149158 Pulled By: anand1976 fbshipit-source-id: 9f44eecffeb40873f5034ed59a66d21f9f88879e |
|
|
anand76
|
3d6d7bcf17 |
Log CompactOnDeletionCollectorFactory parameters on DB open (#6686)
Summary: Log it in the info log to help in troubleshooting. It is logged as follows - ``` 2020/04/10-10:51:39.886662 7ffff7fef340 Options.table_properties_collectors: CompactOnDeletionCollector (Sliding window size = 100 Deletion trigger = 90); ``` Tests: make check Pull Request resolved: https://github.com/facebook/rocksdb/pull/6686 Reviewed By: ltamasi Differential Revision: D21002442 Pulled By: anand1976 fbshipit-source-id: 7adf0dbae7f1febcb00ce61fea5097118ede5c6a |
|
|
Huisheng Liu
|
9e89ffb776 |
make iterator return versions between timestamp bounds (#6544)
Summary:
(Based on Yanqin's idea) Add a new field in readoptions as lower timestamp bound for iterator. When the parameter is not supplied (nullptr), the iterator returns the latest visible version of a record. When it is supplied, the existing timestamp field is the upper bound. Together the two serves as a bounded time window. The iterator returns all versions of a record falling in the window.
SeekRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
base line (commit
|
|
|
Ziyue Yang
|
03a781a90c |
Add pipelined & parallel compression optimization (#6262)
Summary: This PR adds support for pipelined & parallel compression optimization for `BlockBasedTableBuilder`. This optimization makes block building, block compression and block appending a pipeline, and uses multiple threads to accelerate block compression. Users can set `CompressionOptions::parallel_threads` greater than 1 to enable compression parallelism. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6262 Reviewed By: ajkr Differential Revision: D20651306 fbshipit-source-id: 62125590a9c15b6d9071def9dc72589c1696a4cb |
|
|
sdong
|
fdf882ded2 |
Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433)
Summary: When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433 Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag. Differential Revision: D19977691 fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e |
|
|
sdong
|
8f2bee6747 |
Add ReadOptions.auto_prefix_mode (#6314)
Summary: Add a new option ReadOptions.auto_prefix_mode. When set to true, iterator should return the same result as total order seek, but may choose to do prefix seek internally, based on iterator upper bounds. Also fix two previous bugs when handling prefix extrator changes: (1) reverse iterator should not rely on upper bound to determine prefix. Fix it with skipping prefix check. (2) block-based filter is not handled properly. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6314 Test Plan: (1) add a unit test; (2) add the check to stress test and run see whether it can pass at least one run. Differential Revision: D19458717 fbshipit-source-id: 51c1bcc5cdd826c2469af201979a39600e779bce |
|
|
Maysam Yabandeh
|
6ec6a4a9a4 |
Remove snap_refresh_nanos option (#5826)
Summary: The snap_refresh_nanos option didn't bring much benefit. Remove the feature to simplify the code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5826 Differential Revision: D17467147 Pulled By: maysamyabandeh fbshipit-source-id: 4f950b046990d0d1292d7fc04c2ccafaf751c7f0 |
|
|
Zhongyi Xie
|
2f41ecfe75 |
Refactor trimming logic for immutable memtables (#5022)
Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5 |
|
|
Zhongyi Xie
|
671d15cbdd |
Persistent Stats: persist stats history to disk (#5046)
Summary: This PR continues the work in https://github.com/facebook/rocksdb/pull/4748 and https://github.com/facebook/rocksdb/pull/4535 by adding a new DBOption `persist_stats_to_disk` which instructs RocksDB to persist stats history to RocksDB itself. When statistics is enabled, and both options `stats_persist_period_sec` and `persist_stats_to_disk` are set, RocksDB will periodically write stats to a built-in column family in the following form: key -> (timestamp in microseconds)#(stats name), value -> stats value. The existing API `GetStatsHistory` will detect the current value of `persist_stats_to_disk` and either read from in-memory data structure or from the hidden column family on disk. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5046 Differential Revision: D15863138 Pulled By: miasantreble fbshipit-source-id: bb82abdb3f2ca581aa42531734ac799f113e931b |