Summary:
This turns out to be pretty bad because if we prioritize L0->L1 then L1 can grow artificially large, which makes L0->L1 more and more expensive. For example:
256MB @ L0 + 256MB @ L1 --> 512MB @ L1
256MB @ L0 + 512MB @ L1 --> 768MB @ L1
256MB @ L0 + 768MB @ L1 --> 1GB @ L1
....
256MB @ L0 + 10GB @ L1 --> 10.2GB @ L1
At some point we need to start compacting L1->L2 to speed up L0->L1.
Test Plan:
The performance improvement is massive for heavy write workload. This is the benchmark I ran: https://phabricator.fb.com/P19842671. Before this change, the benchmark took 47 minutes to complete. After, the benchmark finished in 2minutes. You can see full results here: https://phabricator.fb.com/P19842674
Also, we ran this diff on MongoDB on RocksDB on one replicaset. Before the change, our initial sync was so slow that it couldn't keep up with primary writes. After the change, the import finished without any issues
Reviewers: dynamike, MarkCallaghan, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38637
Summary: Dump db stats in WARN level
Test Plan: run db_bench and verify the LOG
Reviewers: igor, MarkCallaghan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38691
Summary:
See https://gist.github.com/mdcallag/89ebb2b8cbd331854865 for the IO stats.
I added "Cumulative compaction:" and "Interval compaction:" lines. The IO rates
can be confusing. Rates fro per-level stats lines, Wr(MB/s) & Rd(MB/s), are computed
using the duration of the compaction job. If the job reads 10MB, writes 9MB and the job
(IO & merging) takes 1 second then the rates are 10MB/s for read and 9MB/s for writes.
The IO rates in the Cumulative compaction line uses the total uptime. The IO rates in the
Interval compaction line uses the interval uptime. So these Cumalative & Interval
compaction IO rates cannot be compared to the per-level IO rates. But both forms of
the rates are useful for debugging perf.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D38667
Summary: Not sure why this fails on some compilers and doesn't on others.
Test Plan: none
Reviewers: meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38673
Summary:
sync_file_range is not always asyncronous and thus can block writes if we do this for WAL in the foreground thread. See more here: http://yoshinorimatsunobu.blogspot.com/2014/03/how-syncfilerange-really-works.html
Some users don't want us to call sync_file_range on WALs. Some other do.
Thus, I'm adding a separate option wal_bytes_per_sync to control calling
sync_file_range on WAL files. bytes_per_sync will apply only to table
files now.
Test Plan: no more sync_file_range for WAL as evidenced by strace
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38253
Summary: As title. I spent some time thinking about it and I don't think there should be any issue with running manual compaction and flushes in parallel
Test Plan: make check works
Reviewers: rven, yhchiang, sdong
Reviewed By: yhchiang, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38355
Summary: DBTest.DynamicLevelMaxBytesCompactRange needs to make sure L0 is not empty to properly cover the code paths we want to cover. However, current codes have a bug that might leave the condition not held. Improve the test to ensure it.
Test Plan: Run the test in an environment that is used to fail. Also run it many times.
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D38631
Summary: CompactRange() now is much more expensive for dynamic level base size as it goes through all the levels. Skip those not used levels between level 0 an base level.
Test Plan: Run all unit tests
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37125
Summary:
Allow GetThreadList to report Flush properties, which includes:
* job id
* number of bytes that has been written since flush started.
* total size of input mem-tables
Test Plan:
./db_bench --threads=30 --num=1000000 --benchmarks=fillrandom --thread_status_per_interval=100 --value_size=1000
Sample output from db_bench which tracks same flush job
ThreadID ThreadType cfName Operation ElapsedTime Stage State OperationProperties
140213879898240 High Pri default Flush 5789 us FlushJob::WriteLevel0Table BytesMemtables 4112835 | BytesWritten 577104 | JobID 8 |
ThreadID ThreadType cfName Operation ElapsedTime Stage State OperationProperties
140213879898240 High Pri default Flush 30.634 ms FlushJob::WriteLevel0Table BytesMemtables 4112835 | BytesWritten 1734865 | JobID 8 |
Reviewers: rven, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38505
Summary:
When trying to compact entire database with SuggestCompactRange(), we'll first try the left-most files. This is pretty bad, because:
1) the left part of LSM tree will be overly compacted, but right part will not be touched
2) First compaction will pick up the left-most file. Second compaction will try to pick up next left-most, but this will not be possible, because there's a big chance that second's file range on N+1 level is already being compacted.
I observe both of those problems when running Mongo+RocksDB and trying to compact the DB to clean up tombstones. I'm unable to clean them up :(
This diff adds a bit of randomness into choosing a file. First, it chooses a file at random and tries to compact that one. This should solve both problems specified here.
Test Plan: make check
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38379
Summary: DBTest.DynamicLevelMaxBytesBase2 has a check that is not necessary and may fail. Remove it, and add two unrelated check.
Test Plan: Run the test
Reviewers: yhchiang, rven, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D38457
Summary: Universal compactions with multiple levels should use file preallocation size based on file size if output level is not level 0
Test Plan: Run all tests.
Reviewers: igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D38439
Summary: Add --rate_limiter_bytes_per_sec to db_bench to allow rater limit to disk
Test Plan:
Run
./db_bench --benchmarks=fillseq --num=30000000 --rate_limiter_bytes_per_sec=3000000 --num_multi_db=8 -disable_wal
And see io_stats to have the rate limited.
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D38385
Summary:
Fixed the following compile error in db/column_family.cc
db/column_family.cc:633:33: error: ‘ASSERT_GT’ was not declared in this scope
16:14:45 ASSERT_GT(listeners.size(), 0U);
Test Plan: make db_test
Reviewers: igor, sdong, rven
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38367
Summary:
Fixed a bug in EventListener::OnCompactionCompleted() that returns
incorrect list of input / output file names.
Test Plan: Extend existing test in listener_test.cc
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38349
Summary: This caused a crash of our MongoDB + RocksDB instance. PickCompactionBySize() sets its own parent_index. We never reset this parent_index when picking PickFilesMarkedForCompactionExperimental(). So we might end up doing SetupOtherInputs() with parent_index that was set by PickCompactionBySize, although we're using compaction calculated using PickFilesMarkedForCompactionExperimental.
Test Plan: Added a unit test that fails with assertion on master.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38337
Summary:
Added a couple functions to WriteBatchWithIndex to make it easier to query the value of a key including reading pending writes from a batch. (This is needed for transactions).
I created write_batch_with_index_internal.h to use to store an internal-only helper function since there wasn't a good place in the existing class hierarchy to store this function (and it didn't seem right to stick this function inside WriteBatchInternal::Rep).
Since I needed to access the WriteBatchEntryComparator, I moved some helper classes from write_batch_with_index.cc into write_batch_with_index_internal.h/.cc. WriteBatchIndexEntry, ReadableWriteBatch, and WriteBatchEntryComparator are all unchanged (just moved to a different file(s)).
Test Plan: Added new unit tests.
Reviewers: rven, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38037
Summary: In new clang we need to add override to every overriden function
Test Plan: none
Reviewers: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D38259
Summary: When reporting compaction that was started because of SuggestCompactRange() we should treat it as manual compaction.
Test Plan: none
Reviewers: yhchiang, rven
Reviewed By: rven
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38139
Summary:
Couple changes:
1. instead of SnapshotList, just take a vector of snapshots
2. don't take a separate parameter is_snapshots_supported. If there are snapshots in the list, that means they are supported. I actually think we should get rid of this notion of snapshots not being supported.
3. don't pass in mutable_cf_options as a parameter. Lifetime of mutable_cf_options is a bit tricky to maintain, so it's better to not pass it in for the whole compaction job. We only really need it when we install the compaction results.
Test Plan: make check
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36627
Summary:
Fixes#6840824, running "make check" on centos6 hits
a deadlock in column_family_test
Test Plan:
seq 10000 | parallel --gnu --eta 't=/dev/shm/rdb-{}; rm -rf
$t; mkdir $t && export TEST_TMPDIR=$t; ./column_family_test > $t/log-{}'
Made the test deterministic by narrrowing the window for the flush.
Reviewers: igor, meyering
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38079
Summary: Optimize GetRange Function by checking the level of the files
Test Plan: pass make all check
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37977
Summary:
[noticed a new warning when building with the very latest gcc]
* db/memtablerep_bench.cc (FLAGS_env): Remove declaration
of unused varaible, to avoid this warning/error:
db/memtablerep_bench.cc:135:22: error: ‘FLAGS_env’ defined but not\
used [-Werror=unused-variable]
static rocksdb::Env* FLAGS_env = rocksdb::Env::Default();
^
Test Plan: compile
Reviewers: ljin, rven, igor.sugak, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37983
Summary:
The default, use one iter for the whole test, isn't good. This cost me
a few hours of debugging and a few days of tessting. For readonly
that isn't realistic and for read-write that keeps a lot of old sst files around.
I remove the option because nothing uses it and not calling gettimeofday per
loop iteration adds about 3% to QPS at 20 threads.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37965
Summary:
CPU profiling reveals GetApproximateSizes as a bottleneck for performance. The current implementation is sub-optimal, it scans every file in every level to compute the result.
We can take advantage of the fact that all levels above 0 are sorted in the increasing order of key ranges and use binary search to locate the starting index. This can reduce the number of comparisons required to compute the result.
Test Plan: We have good test coverage. Run the tests.
Reviewers: sdong, igor, rven, dynamike
Subscribers: dynamike, maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37755
Summary: Before the fix we also marked the bottommost level for compaction. This is wrong because then RocksDB has N+1 levels instead of N as before the compaction.
Test Plan: SuggestCompactRangeTest in db_test
Reviewers: yhchiang, rven
Reviewed By: rven
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37869
Summary: Remove duplicate code. If this diff looks good, I will cleanup other call sites as well.
Test Plan: unit tests
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37761
Summary:
Added these events:
* Recovery start, finish and also when recovery creates a file
* Trivial move
* Compaction start, finish and when compaction creates a file
* Flush start, finish
Also includes small fix to EventLogger
Also added option ROCKSDB_PRINT_EVENTS_TO_STDOUT which is useful when we debug things. I've spent far too much time chasing LOG files.
Still didn't get sst table properties in JSON. They are written very deeply into the stack. I'll address in separate diff.
TODO:
* Write specification. Let's first use this for a while and figure out what's good data to put here, too. After that we'll write spec
* Write tools that parse and analyze LOGs. This can be in python or go. Good intern task.
Test Plan: Ran db_bench with ROCKSDB_PRINT_EVENTS_TO_STDOUT. Here's the output: https://phabricator.fb.com/P19811976
Reviewers: sdong, yhchiang, rven, MarkCallaghan, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37521
Summary:
Make it build for CYGWIN.
Need to define "-std=gnu++11" instead of "-std=c++11" and use some replacement functions.
Test Plan: Build it and run some unit tests in CYGWIN
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37605
Summary:
CompactRange for universal compaction with num_levels > 1 seems to have a bug. The unit test also has a bug so it doesn't capture the problem.
Fix it. Revert the compact range to the logic equivalent to num_levels=1. Always compact all files together.
It should also fix DBTest.IncreaseUniversalCompactionNumLevels. The issue was that options.write_buffer_size = 100 << 10 and options.write_buffer_size = 100 << 10 are not used in later test scenarios. So write_buffer_size of 4MB was used. The compaction trigger condition is not anymore obvious as expected.
Test Plan: Run the new test and all test suites
Reviewers: yhchiang, rven, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37551
Summary:
Based on feedback from D37083.
Are all of these correct? In some spaces it seems like we're doing SetMaxPossibleForUserKey() although we want the smallest possible internal key for user key.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37341
Summary: Reading CompactionPicker I noticed this dangerous substraction of two unsigned integers. We should assert to mark this as safe.
Test Plan: make check
Reviewers: anthony, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37041
Summary:
This diff implements a new `DB` method `PromoteL0` which moves all files in L0
to a given level skipping compaction, provided that the files have disjoint
ranges and all levels up to the target level are empty.
This method provides finer-grain control for trivial compactions, and it is
useful for bulk-loading pre-sorted keys. Compared to D34797, it does not change
the semantics of an existing operation, which can impact existing code.
PromoteL0 is designed to work well in combination with the proposed
`GetSstFileWriter`/`AddFile` interface, enabling to "design" the level structure
by populating one level at a time. Such fine-grained control can be very useful
for static or mostly-static databases.
Test Plan: `make check`
Reviewers: IslamAbdelRahman, philipp, MarkCallaghan, yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37107
Summary: Add more logging to help debugging issues.
Test Plan: Run test suites
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37401
Summary: To further distinguish the corruption cases were caused by storage media or in memory states when writing it, add a paranoid check after writing the file to iterate all the rows.
Test Plan: Add a new unit test for it
Reviewers: rven, igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37335
Summary:
A couple of times on Travis, we have had the thread status say that there were no compactions done and since we assert for it, the test failed.
We now fix this by waiting till compaction started.
Test Plan:
run DBTEST::*PreShutdown*
d=/tmp/j; rm -rf $d; seq 200 | parallel --gnu --eta 'd=/tmp/j/d-{}; mkdir -p $d; TEST_TMPDIR=$d ./db_test --gtest_filter=DBTest.PreShutdown* >& '$d'/log-{}'
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37545
Summary:
Some Mongo+Rocks datasets in Parse's environment are not doing compactions very frequently. During the quiet period (with no IO), we'd like to schedule compactions so that our reads become faster. Also, aggressively compacting during quiet periods helps when write bursts happen. In addition, we also want to compact files that are containing deleted key ranges (like old oplog keys).
All of this is currently not possible with CompactRange() because it's single-threaded and blocks all other compactions from happening. Running CompactRange() risks an issue of blocking writes because we generate too much Level 0 files before the compaction is over. Stopping writes is very dangerous because they hold transaction locks. We tried running manual compaction once on Mongo+Rocks and everything fell apart.
MarkForCompaction() solves all of those problems. This is very light-weight manual compaction. It is lower priority than automatic compactions, which means it shouldn't interfere with background process keeping the LSM tree clean. However, if no automatic compactions need to be run (or we have extra background threads available), we will start compacting files that are marked for compaction.
Test Plan: added a new unit test
Reviewers: yhchiang, rven, MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37083
Summary:
The usage I'm fixing here caused trouble on Fedora 21 when
compiling with the current gcc version 4.9.2 20150212 (Red Hat 4.9.2-6) (GCC):
db/write_controller_test.cc: In member function ‘virtual void rocksdb::WriteControllerTest_SanityTest_Test::TestBody()’:
db/write_controller_test.cc:23:165: error: converting ‘false’ to pointer type for argument 1 of ‘char testing::internal::IsNullLiteralHelper(testing::internal::Secret*)’ [-Werror=conversion-null]
ASSERT_EQ(false, controller.IsStopped());
^
This change was induced mechanically via:
git grep -l -E 'ASSERT_EQ\(false'|xargs perl -pi -e 's/ASSERT_EQ\(false, /ASSERT_FALSE(/'
git grep -l -E 'ASSERT_EQ\(true'|xargs perl -pi -e 's/ASSERT_EQ\(true, /ASSERT_TRUE(/'
Except for the three in utilities/backupable/backupable_db_test.cc for which
I ended up reformatting (joining lines) in the result.
As for why this problem is exhibited with that version of gcc, and none
of the others I've used (from 4.8.1 through gcc-5.0.0 and newer), I suspect
it's a bug in F21's gcc that has been fixed in gcc-5.0.0.
Test Plan:
"make" now succeed on Fedora 21
Reviewers: ljin, rven, igor.sugak, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37329
Summary: this is not used anywhere
Test Plan: compiles
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37053
Summary: If ExpandWhileOverlapping() we don't clear inputs. That's a bug introduced by my recent patch https://reviews.facebook.net/D36687. However, we have no tests covering ExpandWhileOverlapping(). I created a task t6771252 to add ExpandWhileOverlapping() tests.
Test Plan: make check
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37077
Summary: D36669 introduces a bug that trivial moved data is not going to specific level but the next level, which will incorrectly be level 1 for level 0 compaciton if base level is not level 1. Fixing it by appreciating the output level
Test Plan: Run all tests
Reviewers: MarkCallaghan, rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37119
Summary:
Recent change of DBTest.DynamicLevelCompressionPerLevel2 has a bug that the second sync point is not enabled. Fix it. Also add an assert for that.
Also, flush compression is not tracked in the test. Add it.
Test Plan: Build everything
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37101
Summary: When commiting the sync point interface change, didn't resolve the new occurance of the old interface in rebase. Fix it.
Test Plan: Build and see it pass
Reviewers: igor, yhchiang, rven, anthony, kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37095
Summary:
Allow users to give a callback function with parameter using sync point, so more complicated verification can be done in tests.
Use it in DBTest.DynamicLevelCompressionPerLevel2 so that failures will be more easy to debug.
Test Plan: Run all tests. Run DBTest.DynamicLevelCompressionPerLevel2 with valgrind check.
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36999
Summary: https://reviews.facebook.net/D36963 made the debug build much faster and that triggered failures of CompactFilesOnLevelCompaction test. 3 out of 4 last tests on Jenkins failed. I'm disabling this test temporarily, since we likely know the reason why it's failing and there's already work in progress to address it -- https://reviews.facebook.net/D36225
Test Plan: none
Reviewers: sdong, rven, yhchiang, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36993
Summary: We should use mocked-out env for these tests to make it more realiable. Added benefit is that instead of actually sleeping for 3 seconds, we can instead pretend to sleep and just increase time counters.
Test Plan: for i in `seq 100`; do ./wal_manager_test --gtest_filter=WalManagerTest.WALArchivalTtl ;done
Reviewers: rven, meyering
Reviewed By: meyering
Subscribers: meyering, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36951
Summary:
The problem is that sometimes two memtables will be compacted together into a single file. In that case, our assertion
ASSERT_EQ(NumTableFilesAtLevel(0), 5);
fails because same amount of data is in 4 files instead of 5. We should wait for flush so that we prevent two memtables merging into a single file.
Test Plan: `for i in `seq 20`; do mrtest FIFOCompactionTest; done` -- fails at least once before. fails zero times after.
Reviewers: rven
Reviewed By: rven
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36939
Summary:
1. it doesn't work
2. we're not using it
In the future, if we need general benchmark framework, we should probably use https://github.com/google/benchmark
Test Plan: make all
Reviewers: yhchiang, rven, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36777
Summary:
The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong).
Here are couple of things demonstrating that Compaction class is hard to use:
1. we have two constructors of Compaction class
2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles
3. it's easy to introduce a subtle and dangerous bug like this: D36225
4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: afbafeaeae/db/compaction.cc (L236-L241). It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: afbafeaeae/db/compaction_picker.cc (L204-L210)
The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup.
My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object.
This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes:
* have one Compaction constructor instead of two.
* inputs_ is constant after construction
* MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction.
* SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input.
* CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need.
Test Plan:
make check
make asan_check
make valgrind_check
Reviewers: rven, anthony, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: sdong, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36687
Summary: Need to remember to unref MemTableList->current() before deleting.
Test Plan: ran test with valgrind
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36855
Summary:
Test failing due to a missing directory caused by a simple bug (did not run into this on my dev box since the path already existed).
We should look into deleting test::TmpDir() before each test run.
Test Plan: ran test
Reviewers: igor, yhchiang, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36831
Summary:
Fixed xfunc related compile errors in ROCKSDB_LITE
Now make OPT=-DROCKSDB_LITE shared_lib -j32 would work
Test Plan:
make clean
make OPT=-DROCKSDB_LITE shared_lib -j32
make clean
make OPT=-DROCKSDB_LITE static_lib -j32
Reviewers: sdong, igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36825
Summary: Add tests for MemTableList
Test Plan: run test
Reviewers: yhchiang, kradhakrishnan, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36735
Summary:
Fix a compile error in ROCKSDB_LITE in db/db_impl.cc
related to internal_stats.
Test Plan: make OPT=-DROCKSDB_LITE shared_lib
Reviewers: sdong, igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36819
Summary:
Fix a compilation error in ROCKSDB_LITE in db/internal_stats.h
Other compilation errors will be fixed in a separate diff.
Test Plan: make OPT=-DROCKSDB_LITE
Reviewers: sdong, igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36807
Summary:
Add a test case:
Write some keys without sync, flush, write other keys and do sync. Before flush finishes, host crashes and unsync data is dropped.
Tag the new test as disabled since it is not passing.
Test Plan: Run the test
Reviewers: MarkCallaghan, rven, anthony, igor, kradhakrishnan
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36741
Summary:
This fixes two problems:
1) the env should not be created twice when use_existing_db is false
2) the env dtor should run before cachedev_fd_ is closed.
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36795
Summary: Other than making some class members private, this is a documentation-only change
Test Plan: unit tests
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36567
Summary: Now EnvOptions uses unsanitized DB options. bytes_per_sync is tuned off when rate_limiter is used, but this change doesn't take effort.
Test Plan: See different I/O pattern in db_bench running fillseq.
Reviewers: yhchiang, kradhakrishnan, rven, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36723
Summary: Now trivial move is only triggered when moving from level n to n+1. With dynamic level base, it is possible that file is moved from level 0 to level n, while levels from 1 to n-1 are empty. Extend trivial move to this case.
Test Plan: Add a more unit test of sequential loading. Non-trivial compaction happened without the patch and now doesn't happen.
Reviewers: rven, yhchiang, MarkCallaghan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba, IslamAbdelRahman
Differential Revision: https://reviews.facebook.net/D36669
Summary:
There are some cases when flachcache file descriptor was
already allocated (i.e. fb-MySQL). Then NewFlashcacheAwareEnv returns an
error at open() because fd was already assigned. This diff adds another
function to instantiate FlashcacheAwareEnv, with pre-allocated fd cachedev_fd.
Test Plan: Tested with MyRocks using this function, then worked
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, MarkCallaghan, rven
Differential Revision: https://reviews.facebook.net/D36447
Summary: Now we add warnings when user configures compression and the compression is not supported.
Test Plan:
Configured compression to non-supported values. Observed messages in my log:
2015/03/26-12:17:57.586341 7ffb8a496840 [WARN] Compression type chosen for level 2 is not supported: LZ4. RocksDB will not compress data on level 2.
2015/03/26-12:19:10.768045 7f36f15c5840 [WARN] Compression type chosen is not supported: LZ4. RocksDB will not compress data.
Reviewers: rven, sdong, yhchiang
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35979
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
Summary:
If accumulated_num_non_deletions_ were ever smaller than
accumulated_num_deletions_, the computation of
"accumulated_num_non_deletions_ - accumulated_num_deletions_"
would result in a logically "negative" value, but since
the two operands are unsigned (uint64_t), the result corresponding
to e.g., -1 would 2^64-1.
Instead, return 0 in that case.
Test Plan:
- ensure "make check" still passes
- temporarily add an "abort();" call in the new "if"-block, and
observe that it fails in some test cases. However, note that
this case is triggered only when the two numbers are equal.
Thus, no test case triggers the erroneous behavior this
change is designed to avoid. If anyone can construct a
scenario in which that bug would be triggered, I'll be
happy to add a test case.
Reviewers: ljin, igor, rven, igor.sugak, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36489
Summary: Int is used for level size targets when options_.level_compaction_dynamic_level_bytes=true, which will cause overflow when database grows big. Fix it.
Test Plan: Add a new unit test which fails without the fix.
Reviewers: rven, yhchiang, MarkCallaghan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D36453
Summary: In some db_test tests sync points are not cleared which will cause unexpected results in the next tests. Clean them up in test cleaning up.
Test Plan:
Run the same tests that used to fail:
build using USE_CLANG=1 and run
./db_test --gtest_filter="DBTest.CompressLevelCompaction:*DBTestUniversalCompactionParallel*"
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36429
Summary:
This diff fixes a crash found when an empty database is opened in readonly mode.
We now check the number of levels before we open the DB as a compacted DB.
Test Plan: DBTest.EmptyCompactedDB
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36327
Summary:
Fix the make unity build. The local stats variable name was shadowing a
global stats variable.
Test Plan:
Run the build
OPT=-DTRAVIS V=1 make unity
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36285
Summary:
After recent change of DBTest.DynamicCompactionOptions, occasionally hit another non-deterministic case where L0 showdown is triggered while timeout should not triggered for hard limit.
Fix it by increasing L0 slowdown trigger at the same time.
Test Plan: Run the failed test.
Reviewers: igor, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36219
Summary:
With this change, we use L1 and up to store compaction outputs in universal compaction.
The compaction pick logic stays the same. Outputs are stored in the largest "level" as possible.
If options.num_levels=1, it behaves all the same as now.
Test Plan:
1) convert most of existing unit tests for universal comapaction to include the option of one level and multiple levels.
2) add a unit test to cover parallel compaction in universal compaction and run it in one level and multiple levels
3) add unit test to migrate from multiple level setting back to one level setting
4) add a unit test to insert keys to trigger multiple rounds of compactions and verify results.
Reviewers: rven, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: meyering, leveldb, MarkCallaghan, dhruba
Differential Revision: https://reviews.facebook.net/D34539
Summary:
Just couple of small changes:
1. removed signal_test, since it doesn't seem useful and we don't even run it as part of `make check`
2. moved perf_context_test to TESTS instead of PROGRAMS
3. `make release` probably shouldn't compile benchmarks. We currently rely on `make release` building db_bench (via Jenkins), so I left db_bench there.
This is just a minor cleanup. We need to rethink our targets since they are a bit messy right now. We can do this during our tech debt week.
Test Plan: make release
Reviewers: anthony, rven, yhchiang, sdong, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36171
Summary:
The --stats_interval_seconds determines interval for stats reporting
and overrides --stats_interval when set. I also changed tools/benchmark.sh
to report stats every 60 seconds so I can avoid trying to figure out a
good value for --stats_interval per test and per storage device.
Task ID: #6631621
Blame Rev:
Test Plan:
run tools/run_flash_bench, look at output
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36189
Summary:
Cleaning up log files can do heavy IO, since we call ftruncate() in the destructor. We don't want to call ftruncate() in user threads.
This diff moves cleaning to background threads (flush and compaction)
Test Plan: make check, will also run valgrind
Reviewers: yhchiang, rven, MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36177
Summary:
This makes run_flash_bench.sh configurable. Previously it was hardwired for 1B keys and tests
ran for 12 hours each. That kept me from using it. This makes it configuable, adds more tests,
makes the duration per-test configurable and refactors the test scripts.
Adds the seekrandomwhilemerging test to db_bench which is the same as seekrandomwhilewriting except
the writer thread does Merge rather than Put.
Forces the stall-time column in compaction IO stats to use a fixed format (H:M:S) which makes
it easier to scrape and parse. Also adds an option to AppendHumanMicros to force a fixed format.
Sometimes automation and humans want different format.
Calls thread->stats.AddBytes(bytes); in db_bench for more tests to get the MB/sec summary
stats in the output at test end.
Adds the average ingest rate to compaction IO stats. Output now looks like:
https://gist.github.com/mdcallag/2bd64d18be1b93adc494
More information on the benchmark output is at https://gist.github.com/mdcallag/db43a58bd5ac624f01e1
For benchmark.sh changes default RocksDB configuration to reduce stalls:
* min_level_to_compress from 2 to 3
* hard_rate_limit from 2 to 3
* max_grandparent_overlap_factor and max_bytes_for_level_multiplier from 10 to 8
* L0 file count triggers from 4,8,12 to 4,12,20 for (start,stall,stop)
Task ID: #6596829
Blame Rev:
Test Plan:
run tools/run_flash_bench.sh
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36075
Summary: Most of the approach is copied from WebSQL's MySQL branch. It's nice that we can do this without touching core RocksDB code.
Test Plan: Compiles and runs. Didn't test flashback code, as I don't have flashback device and most if it is c/p
Reviewers: MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: rven, lgalanis, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35391
Summary:
Assign the string properties to const string variables under the
DB::Properties namespace. This helps catch typos during compilation and
also consolidates the property definition in one place.
Test Plan: Run rocksdb unit tests
Reviewers: sdong, yoshinorim, igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D35991
Summary: It's useful to know if we have compression support or no
Test Plan:
Observed this in my LOG:
2015/03/26-10:34:35.460681 7f5b322b7840 Snappy supported
2015/03/26-10:34:35.460682 7f5b322b7840 Zlib supported
2015/03/26-10:34:35.460686 7f5b322b7840 Bzip supported
2015/03/26-10:34:35.460687 7f5b322b7840 LZ4 NOT supported
Reviewers: sdong, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35955
[maa@srv2-nskb-devg2 rocksdb-master]$ CXX=/usr/local/CC/gcc-4.7.4/bin/g++ EXTRA_CXXFLAGS=-std=c++11 DISABLE_WARNING_AS_ERROR=1 make db_bench
CC db/db_bench.o
db/db_bench.cc: In member function 'rocksdb::Slice rocksdb::Benchmark::AllocateKey(std::unique_ptr<const char []>*)':
db/db_bench.cc:1434:41: error: use of deleted function 'void std::unique_ptr<_Tp [], _Dp>::reset(_Up) [with _Up = char*; _Tp = const char; _Dp = std::default_delete<const char []>]'
In file included from /usr/local/CC/gcc-4.7.4/lib/gcc/x86_64-unknown-linux-gnu/4.7.4/../../../../include/c++/4.7.4/memory:86:0,
from ./include/rocksdb/db.h:14,
from ./db/dbformat.h:14,
from ./db/db_impl.h:21,
from db/db_bench.cc:33:
Summary:
We have addded new stats and perf_context for measuring the merge and filter operation time consumption.
We have bounded all the merge operations within the GUARD statment and collected the total time for these operations in the DB.
Test Plan: WIP
Reviewers: rven, yhchiang, kradhakrishnan, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D34377
Summary:
Report elapsed time of a thread operation in micros in ThreadStatus
instead of start time of a thread operation in seconds since the
Epoch, 1970-01-01 00:00:00 (UTC).
Test Plan:
./db_bench --benchmarks=fillrandom --num=100000 --threads=40 \
--max_background_compactions=10 --max_background_flushes=3 \
--thread_status_per_interval=1000 --key_size=16 --value_size=1000 \
--num_column_families=10
Sample Output:
ThreadID ThreadType cfName Operation ElapsedTime Stage State
140667724562496 High Pri column_family_name_000002 Flush 772.419 ms FlushJob::WriteLevel0Table
140667728756800 High Pri default Flush 617.845 ms FlushJob::WriteLevel0Table
140667732951104 High Pri column_family_name_000005 Flush 772.078 ms FlushJob::WriteLevel0Table
140667875557440 Low Pri column_family_name_000008 Compaction 1409.216 ms CompactionJob::Install
140667737145408 Low Pri
140667749728320 Low Pri
140667816837184 Low Pri column_family_name_000007 Compaction 1071.815 ms CompactionJob::ProcessKeyValueCompaction
140667787477056 Low Pri column_family_name_000009 Compaction 772.516 ms CompactionJob::ProcessKeyValueCompaction
140667741339712 Low Pri
140667758116928 Low Pri column_family_name_000004 Compaction 620.739 ms CompactionJob::ProcessKeyValueCompaction
140667753922624 Low Pri
140667842003008 Low Pri column_family_name_000006 Compaction 1260.079 ms CompactionJob::ProcessKeyValueCompaction
140667745534016 Low Pri
Reviewers: sdong, igor, rven
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35769
Summary:
Improve ThreadStatusSingleCompaction in two ways:
1. Use SYNC_POINT to ensure compaction won't happen
before the test finishes its "Put Phase" instead of
using sleep.
2. In Put Phase, it continues until we have sufficient
number of L0 files. Note that during the put phase,
there won't be any compaction that consumes L0 files
because of item 1.
Test Plan: ./db_test --gtest_filter="*ThreadStatusSingleCompaction*"
Reviewers: sdong, igor, rven
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35727
Summary: DBTest doesn't clean up wal directory. It might cause failure after a failure test run. Fix it.
Test Plan:
Run unit tests
Try open DB with non-empty db_path/wal.
Reviewers: rven, yhchiang, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35559
Summary:
To understand the bug read t5943287 and check out the new test in column_family_test (ReadDroppedColumnFamily), iter 0.
RocksDB contract allowes you to read a drop column family as long as there is a live reference. However, since our iteration ignores dropped column families, AddLiveFiles() didn't mark files of a dropped column families as live. So we deleted them.
In this patch I no longer ignore dropped column families in the iteration. I think this behavior was confusing and it also led to this bug. Now if an iterator client wants to ignore dropped column families, he needs to do it explicitly.
Test Plan: Added a new unit test that is failing on master. Unit test succeeds now.
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32535
Summary: Suprisingly, the only way we use this vector is to keep track of level0 compactions. Thus, I simplified it.
Test Plan: make check
Reviewers: rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35313
Summary: This is a simple change to make db_test::MultiThreadedDBTest as value parameterized test. There is a value of creating a separate set of such tests later.
Test Plan:
```lang=bash
% make db_test
% ./make db_test
```
Also with the following command I can execute all db_test in 2:37.87 on my box
```
% ./db_test --gtest_list_tests | sed 's/\# GetParam.*//' | tr -d ' ' | env time parallel --gnu --eta --joblog=LOG -- 'TEST_TMPDIR=/dev/shm/rocksdb-{} ./db_test --gtest_filter="*{}"'
```
Reviewers: igor, rven, meyering, sdong
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35361
Summary: Add a DB property for number of deletions in memtables. It can sometimes help people debug slowness because of too many deletes.
Test Plan: Add test cases.
Reviewers: rven, yhchiang, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D35247
Summary:
This is like readwhilewriting but uses Merge rather than Put in the writer thread.
I am using it for in-progress benchmarks. I don't think the other benchmarks for Merge
cover this behavior. The purpose for this test is to measure read performance when
readers might have to merge results. This will also benefit from work-in-progress
to add skewed key generation.
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D35115
Summary: WriteBatch and WriteBatchWithIndex now both inherit from a common abstract base class. This makes it easier to write code that is agnostic toward the implementation of the particular write batch. In particular, I plan on utilizing this abstraction to allow transactions to support using either implementation of a write batch.
Test Plan: modified existing WriteBatchWithIndex tests to test new functions. Running all tests.
Reviewers: igor, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34017
Summary: It is no longer used by the implementation, so we should also remove it from the public API.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34971
Summary:
Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different.
In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest.
There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides.
```lang=bash
% cat ~/transform
#!/bin/sh
files=$(git ls-files '*test\.cc')
for file in $files
do
if grep -q "rocksdb::test::RunAllTests()" $file
then
if grep -Eq '^class \w+Test {' $file
then
perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file
perl -pi -e 's/^(TEST)/${1}_F/g' $file
fi
perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file
perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file
fi
done
% sh ~/transform
% make format
```
Second iteration of this diff contains only scripted changes.
Third iteration contains manual changes to fix last errors and make it compilable.
Test Plan:
Build and notice no errors.
```lang=bash
% USE_CLANG=1 make check -j55
```
Tests are still testing.
Reviewers: meyering, sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35157
Summary: Some suggestions for cleanup from Igor.
Test Plan: Regression tests.
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D35169
Summary:
gtest does not use exceptions to fail a unit test by design, and `ASSERT*`s are implemented using `return`. As a consequence we cannot use `ASSERT*` in a function that does not return `void` value ([[ https://code.google.com/p/googletest/wiki/AdvancedGuide#Assertion_Placement | 1]]), and have to fix our existing code. This diff does this in a generic way, with no manual changes.
In order to detect all existing `ASSERT*` that are used in functions that doesn't return void value, I change the code to generate compile errors for such cases.
In `util/testharness.h` I defined `EXPECT*` assertions, the same way as `ASSERT*`, and redefined `ASSERT*` to return `void`. Then executed:
```lang=bash
% USE_CLANG=1 make all -j55 -k 2> build.log
% perl -naF: -e 'print "-- -number=".$F[1]." ".$F[0]."\n" if /: error:/' \
build.log | xargs -L 1 perl -spi -e 's/ASSERT/EXPECT/g if $. == $number'
% make format
```
After that I reverted back change to `ASSERT*` in `util/testharness.h`. But preserved introduced `EXPECT*`, which is the same as `ASSERT*`. This will be deleted once switched to gtest.
This diff is independent and contains manual changes only in `util/testharness.h`.
Test Plan:
Make sure all tests are passing.
```lang=bash
% USE_CLANG=1 make check
```
Reviewers: igor, lgalanis, sdong, yufei.zhu, rven, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33333
Summary:
On RocksDB, when there are multiple instances doing
flushes/compactions in the background, the close call takes a long time
because the flushes/compactions need to complete before the database can
shut down. If another instance is using the background threads and the compaction for this instance is in the queue since it has been scheduled, we still cannot shutdown. We now remove the scheduled background tasks which have not yet started running, so that shutdown is speeded up.
Test Plan: DB Test added.
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33741
Summary: These changes are necessary to make tests look more generic, and avoid feature conflicts with gtest.
Test Plan:
Make sure no build errors, and all test are passing.
```
% make check
```
Reviewers: igor, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35145
Summary:
The output did not have space for 6-digit file counts or for 3-digit
counts of files being compacted. This adds space for that while preserving
existing alignment. See https://gist.github.com/mdcallag/0a61c6a18dd467224c11
Task ID: #
Blame Rev:
Test Plan:
run db_bench, look at output
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D35091
Summary:
The preshutdown tests check for stopped compactions/flushes.
Removing stalls on the write path.
Test Plan: DBTests.PreShutdown*
Reviewers: yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35037
Summary:
Improve the robustness of ThreadStatusSingleCompaction
by ensuring the number of files flushed in the test.
Test Plan:
export ROCKSDB_TESTS=ThreadStatus
./db_test
Reviewers: sdong, igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35019
Summary:
Fix the deadlock issue in ThreadStatusSingleCompaction.
In the previous version of ThreadStatusSingleCompaction, the compaction
thread will wait for a SYNC_POINT while its db_mutex is held. However,
if the test hasn't finished its Put cycle while a compaction is running,
a deadlock will happen in the test.
Test Plan:
export ROCKSDB_TESTS=ThreadStatus
./db_test
Reviewers: sdong, igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35001
Summary: The test depends on snappy to be used. Skip the test if it is not supported.
Test Plan: Run the test
Reviewers: meyering, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D34995
Summary: Currently, we have `ifdef SNAPPY` around bunch of db_test code. Some tests that don't even use compression are also blocked when running system doesn't have snappy. This also causes hard-to-catch bugs, like D34983. We should dynamically figure out if compression is supported or not.
Test Plan: compiles
Reviewers: sdong, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34989
Summary:
Here's my proposal for making our LOGs easier to read by machines.
The idea is to dump all events as JSON objects. JSON is easy to read by humans, but more importantly, it's easy to read by machines. That way, we can parse this, load into SQLite/mongo and then query or visualize.
I started with table_create and table_delete events, but if everybody agrees, I'll continue by adding more events (flush/compaction/etc etc)
Test Plan:
Ran db_bench. Observed:
2015/01/15-14:13:25.788019 1105ef000 EVENT_LOG_v1 {"time_micros": 1421360005788015, "event": "table_file_creation", "file_number": 12, "file_size": 1909699}
2015/01/15-14:13:25.956500 110740000 EVENT_LOG_v1 {"time_micros": 1421360005956498, "event": "table_file_deletion", "file_number": 12}
Reviewers: yhchiang, rven, dhruba, MarkCallaghan, lgalanis, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31647
Summary:
The tests using sync_point for intent to shutdown stop
compaction and this results in stalls if too many rows are written. We
now limit the number of rows written to prevent stalls, since the focus
of the test is to cancel background work, which is being correctly
tested. This fixes a Jenkins issue.
Test Plan: DBTest.PreShutdown*
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34893
Summary:
Change the way options.compression_per_level is used when options.level_compaction_dynamic_level_bytes=true so that options.compression_per_level[1] determines compression for the level L0 is merged to, options.compression_per_level[2] to the level after that, etc.
Test Plan: run all tests
Reviewers: rven, yhchiang, kradhakrishnan, igor
Reviewed By: igor
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D34431
Summary: Use a better way to map from a key with locality to a random location. Now with the same -read_random_exp_range setting, hit rate drops, which it is expected.
Test Plan: ./db_bench --benchmarks=readrandom -statistics -use_existing_db -cache_size=5000000 --read_random_exp_range=<multiple_values>
Reviewers: MarkCallaghan, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D34761
Summary:
Provide an API which enables users to infor Rocksdb that it is
shutting down.
Test Plan: db_test
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34617
Summary: Got it working by some voodoo programming
Test Plan: works!
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34611
Summary: Allow GetThreadList() to report the start time of the current operation.
Test Plan:
./db_bench --benchmarks=fillrandom --num=100000 --threads=40 \
--max_background_compactions=10 --max_background_flushes=3 \
--thread_status_per_interval=1000 --key_size=16 --value_size=1000 \
--num_column_families=10
Sample output:
ThreadID ThreadType cfName Operation OP_StartTime State
140338840797248 High Pri column_family_name_000003 Flush 2015/03/09-17:49:59
140338844991552 High Pri column_family_name_000004 Flush 2015/03/09-17:49:59
140338849185856 Low Pri
140338983403584 Low Pri
140339008569408 Low Pri
140338861768768 Low Pri
140338924683328 Low Pri
140338899517504 Low Pri
140338853380160 Low Pri
140338882740288 Low Pri
140338865963072 High Pri column_family_name_000006 Flush 2015/03/09-17:49:59
140338954043456 Low Pri
140338857574464 Low Pri
Reviewers: igor, rven, sdong
Reviewed By: sdong
Subscribers: lgalanis, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34689
Summary: Introduce parameter -read_random_exp_range in db_bench to provide some key skewness in readrandom and multireadrandom benchmarks. It will helpful to cover block cache better.
Test Plan:
Run benchmarks with this new parameter. I can clearly see block cache hit rate change while I increase this value (DB size is about 66MB):
./db_bench --benchmarks=readrandom -statistics -use_existing_db -cache_size=5000000 --read_random_exp_range=0.0
rocksdb.block.cache.data.miss COUNT : 958418
rocksdb.block.cache.data.hit COUNT : 41582
./db_bench --benchmarks=readrandom -statistics -use_existing_db -cache_size=5000000 --read_random_exp_range=5.0
rocksdb.block.cache.data.miss COUNT : 819518
rocksdb.block.cache.data.hit COUNT : 180482
./db_bench --benchmarks=readrandom -statistics -use_existing_db -cache_size=5000000 --read_random_exp_range=10.0
rocksdb.block.cache.data.miss COUNT : 450479
rocksdb.block.cache.data.hit COUNT : 549521
./db_bench --benchmarks=readrandom -statistics -use_existing_db -cache_size=5000000 --read_random_exp_range=20.0
rocksdb.block.cache.data.miss COUNT : 223192
rocksdb.block.cache.data.hit COUNT : 776808
Reviewers: MarkCallaghan, kradhakrishnan, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D34629
Summary: I want to be able to set this through mongo config.
Test Plan: added unit test
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34599
Summary:
Add --thread_status_per_interval to db_bench, which allows
db_bench to optionally enable print the current thread status
periodically.
Test Plan:
./db_bench --benchmarks=fillrandom --num=100000 --threads=40 --max_background_compactions=10 --max_background_flushes=3 --thread_status_per_interval=1000 --key_size=16 --value_size=1000 --num_column_families=10
Sample output:
ThreadID ThreadType dbName cfName Operation State
140281571770432 Low Pri
140281575964736 High Pri /tmp/rocksdbtest-5297/dbbench column_family_name_000001 Flush
140281710182464 Low Pri /tmp/rocksdbtest-5297/dbbench column_family_name_000008 Compaction
140281638879296 Low Pri /tmp/rocksdbtest-5297/dbbench column_family_name_000007 Compaction
140281592741952 Low Pri
140281580159040 High Pri /tmp/rocksdbtest-5297/dbbench column_family_name_000002 Flush
140281676628032 Low Pri /tmp/rocksdbtest-5297/dbbench column_family_name_000006 Compaction
140281584353344 Low Pri
140281622102080 Low Pri /tmp/rocksdbtest-5297/dbbench column_family_name_000009 Compaction
140281605324864 Low Pri /tmp/rocksdbtest-5297/dbbench column_family_name_000004 Compaction
140281601130560 High Pri /tmp/rocksdbtest-5297/dbbench default Flush
140281596936256 Low Pri
140281588547648 Low Pri
Reviewers: igor, rven, sdong
Reviewed By: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D34515
Summary:
When having fixed max_bytes_for_level_base, the ratio of size of largest level and the second one can range from 0 to the multiplier. This makes LSM tree frequently irregular and unpredictable. It can also cause poor space amplification in some cases.
In this improvement (proposed by Igor Kabiljo), we introduce a parameter option.level_compaction_use_dynamic_max_bytes. When turning it on, RocksDB is free to pick a level base in the range of (options.max_bytes_for_level_base/options.max_bytes_for_level_multiplier, options.max_bytes_for_level_base] so that real level ratios are close to options.max_bytes_for_level_multiplier.
Test Plan: New unit tests and pass tests suites including valgrind.
Reviewers: MarkCallaghan, rven, yhchiang, igor, ikabiljo
Reviewed By: ikabiljo
Subscribers: yoshinorim, ikabiljo, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31437
Summary:
Summary:
Added a new option to ColumnFamllyOptions - optimize_filters_for_hits. This option can be used in the case where most
accesses to the store are key hits and we dont need to optimize performance for key misses.
This is useful when you have a very large database and most of your lookups succeed. The option allows the store to
not store and use filters in the last level (the largest level which contains data). These filters can take a large amount of
space for large databases (in memory and on-disk). For the last level, these filters are only useful for key misses and not
for key hits. If we are not optimizing for key misses, we can choose to not store these filters for that level.
This option is only provided for BlockBasedTable. We skip the filters when we are compacting
Test Plan:
1. Modified db_test toalso run tests with an additonal option (skip_filters_on_last_level)
2. Added another unit test to db_test which specifically tests that filters are being skipped
Reviewers: rven, igor, sdong
Reviewed By: sdong
Subscribers: lgalanis, yoshinorim, MarkCallaghan, rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33717
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.
Prerequisites: bear and clang 3.5 build with extra tools
```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```
Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```
Reviewers: igor, kradhakrishnan, rven, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34077
Summary:
An old commit (482401) changed DoWrite to use the value of --writes rather
than --num to determine the range for keys. This restores the old and correct
behavior which is to limit it using --num.
Task ID: #6353043
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D34065
Summary:
In a release build, a member was not being accessed. This
member was only being accessed in a debug build. We now add an accessor
function for this member and the buid succeeds.
Test Plan: build release/unity/debug on linux/mac
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34035
Summary: This causes warnings on OS X
Test Plan: compiles
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33969
Summary:
This diff contains trivial fixes for 6 scan-build warnings:
**db/c_test.c**
`db` variable is never read. Removed assignment.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-9b77d2.html#EndPath
**db/db_iter.cc**
`skipping` local variable is assigned to false. Then in the next switch block the only "non return" case assign `skipping` to true, the rest cases don't use it and all do return.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-13fca7.html#EndPath
**db/log_reader.cc**
In `bool Reader::SkipToInitialBlock()` `offset_in_block` local variable is assigned to 0 `if (offset_in_block > kBlockSize - 6)` and then never used. Removed the assignment and renamed it to `initial_offset_in_block` to avoid confusion.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-a618dd.html#EndPath
In `bool Reader::ReadRecord(Slice* record, std::string* scratch)` local variable `in_fragmented_record` in switch case `kFullType` block is assigned to false and then does `return` without use. In the other switch case `kFirstType` block the same `in_fragmented_record` is assigned to false, but later assigned to true without prior use. Removed assignment for both cases.
scan-build reprots:
http://home.fburl.com/~sugak/latest20/report-bb86b0.html#EndPathhttp://home.fburl.com/~sugak/latest20/report-a975be.html#EndPath
**table/plain_table_key_coding.cc**
Local variable `user_key_size` is assigned when declared. But then in both places where it is used assigned to `static_cast<uint32_t>(key.size() - 8)`. Changed to initialize the variable to the proper value in declaration.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-9e6b86.html#EndPath
**tools/db_stress.cc**
Missing `break` in switch case block. This seems to be a bug. Added missing `break`.
Test Plan:
Make sure all tests are passing and scan-build does not report 'Dead assignment' and 'Dead initialization' bugs.
```lang=bash
% make check
% make analyze
```
Reviewers: meyering, igor, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33795
Summary:
The "const" attribute applies to the type, and placing it
before that return type retains the desired semantics,
yet avoids the compiler error/warning.
Test Plan: Run make
Reviewers: ljin, sdong, igor.sugak, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33789
Summary:
Otherwise, we would assert that an unsigned expression is always >= 0.
The intent was to form a possibly negative number, and to assert that
that value is always >= 0, but since one variable in the computation
was unsigned, the result was guaranteed to be unsigned, too, rendering
the assertion useless.
Cast that unsigned variable to "int", so that all operands
are signed, and thus so that the result can be negative.
Test Plan:
Run "make EXTRA_CXXFLAGS='-W -Wextra'" and see fewer errors.
Reviewers: ljin, sdong, igor.sugak, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33771
Summary:
The "const" attribute does not make sense on a return type,
and provokes a warning/error from gcc -W -Wextra.
Test Plan:
Run "make EXTRA_CXXFLAGS='-W -Wextra'" and see fewer errors.
Reviewers: ljin, sdong, igor.sugak, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33759
Summary:
Remove some always-true assertions.
They provoke these compilation failures:
table/plain_table_key_coding.cc:279:20: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]
db/version_set.cc:336:15: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]
* table/plain_table_key_coding.cc (rocksdb): Remove assertion that
unsigned type variable is >= 0.
* db/version_set.cc (DoGenerateLevelFilesBrief): Likewise.
Test Plan:
Run "make EXTRA_CXXFLAGS='-W -Wextra'" and see fewer errors.
Reviewers: ljin, sdong, igor.sugak, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33747
Summary:
The bug is detected by scan-build.
In `void WriteSeqSeekSeq(ThreadState* thread)` memory is allocated in line 3118 `Slice key = AllocateKey();` but `Slice` is not responsible deleting `Slice::data()`.
Added `std::unique_ptr<const char[]>*` parameter to ` AllocateKey()`, so that it requires caller to not forget about Slice::data() management.
scan-build bug report: http://home.fburl.com/~sugak/latest6/report-6e9754.html#EndPath
Test Plan:
Make sure scan-build does not report 'Memory leak' in db/db_bench.cc and all tests are passing.
```lang=bash
% make analyze
% make check
```
Reviewers: lgalanis, igor, meyering, sdong
Reviewed By: meyering, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33501
Summary:
Prior to this change, "make check" would always waste a lot of
time relinking 60+ binaries. With this change, it does that
only when the generated file, util/build_version.cc, changes,
and that happens only when the date changes or when the
current git SHA changes.
This change makes some other improvements: before, there was no
rule to build a deleted util/build_version.cc. If it was somehow
removed, any attempt to link a program would fail.
There is no longer any need for the separate file,
build_tools/build_detect_version. Its functionality is
now in the Makefile.
* Makefile (DEPFILES): Don't filter-out util/build_version.cc.
No need, and besides, removing that dependency was wrong.
(date, git_sha, gen_build_version): New helper variables.
(util/build_version.cc): New rule, to create this file
and update it only if it would contain new information.
* build_tools/build_detect_platform: Remove file.
* db/db_impl.cc: Now, print only date (not the time).
* util/build_version.h (rocksdb_build_compile_time): Remove
declaration. No longer used.
Test Plan:
- Run "make check" twice, and note that the second time no linking is performed.
- Remove util/build_version.cc and ensure that any "make"
command regenerates it before doing anything else.
- Run this: strings librocksdb.a|grep _build_.
That prints output including the following:
rocksdb_build_git_date:2015-02-19
rocksdb_build_git_sha:2.8.fb-1792-g3cb6cc0
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33591
Summary: Add a DB property about live versions. It can be helpful to figure out whether there are files not live but not yet deleted, in some use cases.
Test Plan: make all check
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33327
Summary:
This is a diff for managed iterator. A managed iterator
is a wrapper around an iterator which saves the options for that
iterator as well as the current key/value so that the underlying iterator
and its associated memory can be released when it is aged out
automatically or on the request of the user. Will provide the automatic release as a follow-up diff.
Test Plan: Managed* tests in db_test and XF tests for managed iterator
Reviewers: igor, yhchiang, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31401
Summary:
Remove ThreadStatusMultiCompaction test as it's currently written
in a way that depends on some randomness, while the flush / compaction
status of a single thread is also covered in ThreadStatusFlush
and ThreadStatusSingleCompaction tests.
Test Plan: ./db_test
Reviewers: igor, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33537
Summary: Allow GetThreadList to reflect flush activity.
Test Plan:
Developed ThreadStatusFlush test and updated ThreadStatusMultiCompaction test.
./db_test ./thread_list_test
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D32871
Summary:
It would be good to assing background job their IDs. Two benefits:
1) makes LOGs more readable
2) I might use it in my EventLogger, which will try to make our LOG easier to read/query/visualize
Test Plan: ran rocksdb, read the LOG
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31617
Summary: DBTest.DestroyDBMetaDatabase occasionally fails on my dev host, for file not existing. Always create directories to avoid that.
Test Plan: Run the test
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33321
Summary: Remember whole key or prefix filtering on/off in SST files. If user opens the DB with a different setting that cannot be satisfied while reading the SST file, ignore the bloom filter.
Test Plan: Add a unit test for it
Reviewers: yhchiang, igor, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32889
Summary: Add counters in perf context to allow users to figure out how time spent on waiting for DB mutex
Test Plan: Add a test and run it.
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D33177
Summary: For description of the bug, see comment in db_test. The fix is pretty straight forward.
Test Plan: added unit test. eventually we need better testing of FOF/POF process.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33081
Summary:
- In statistics.h , added tickers.
- In version_set.cc,
-- Added a getter method for hit_file_level_ in the class FilePicker
-- Added a line in the Get() method in case of a found, increment the corresponding counters based on the level of the file respectively.
Corresponding task: https://our.intern.facebook.com/intern/tasks/?s=506100481&t=5952818
Personal fork: 0c3f2e3600
Test Plan:
In terminal,
```
make -j32 db_test
ROCKSDB_TESTS=L0L1L2AndUpHitCounter ./db_test
```
Or to use debugger,
```
make -j32 db_test
export ROCKSDB_TESTS=L0L1L2AndUpHitCounter
gdb db_test
```
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D32205
Summary: Having a pointer for DB will be helpful to debug when GDB or working on a dump. If the client process doesn't have any thread actively working on RocksDB, it can be hard to find out.
Test Plan: make all check
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33159
Summary:
This diff basically reverts D30249 and also adds a unit test that was failing before this patch.
I have no idea how I didn't catch this terrible bug when writing a diff, sorry about that :(
I think we should redesign our system of keeping track of and deleting files. This is already a second bug in this critical piece of code. I'll think of few ideas.
BTW this diff is also a regression when running lots of column families. I plan to revisit this separately.
Test Plan: added a unit test
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33045
Summary:
When DestroyDB() finds a wal file in the DB directory, it assumes it is actually in WAL directory. This can lead to confusion, since it reports IO error when it tries to delete wal file from DB directory. For example: https://ci-builds.fb.com/job/rocksdb_clang_build/296/console
This change will fix our unit tests.
Test Plan: unit tests work
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32907
Summary:
Add a counter for collecting the wait time on db mutex.
Also add MutexWrapper and CondVarWrapper for measuring wait time.
Test Plan:
./db_test
export ROCKSDB_TESTS=MutexWaitStats
./db_test
verify stats output using db_bench
make clean
make release
./db_bench --statistics=1 --benchmarks=fillseq,readwhilewriting --num=10000 --threads=10
Sample output:
rocksdb.db.mutex.wait.micros COUNT : 7546866
Reviewers: MarkCallaghan, rven, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32787
Summary: db_test's test class SpecialEnv has a thread unsafe variable rnd_ but it can be accessed by multiple threads. It is complained by TSAN. Protect it by a mutex.
Test Plan: Run the test
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32895
Summary: Added requirement that ComputeCompactionScore() be executed in mutex, since it's accessing being_compacted bool, which can be mutated by other threads. Also added more comments about thread safety of FileMetaData, since it was a bit confusing. However, it seems that FileMetaData doesn't have data races (except being_compacted)
Test Plan: Ran 100 ConvertCompactionStyle tests with thread sanitizer. On master -- some failures. With this patch -- none.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32283
Summary:
Get() now doesn't make use of bloom filter if it is prefix based. Add the check.
Didn't touch block based bloom filter. I can't fully reason whether it is correct to do that. But it's straight-forward to for full bloom filter.
Test Plan:
make all check
Add a test case in DBTest
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: MarkCallaghan, leveldb, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D31941
Summary:
This diff containes the changes to the code and db_test
for supporting cross functional tests for inplace_update
Test Plan: Run XF with inplace_test and also without
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32367
Summary:
When building on my host, I saw warning:
In file included from db/db_iter_test.cc:17:0:
db/db_iter_test.cc: In member function ‘void rocksdb::_Test_DBIterator::_Run()’:
./util/testharness.h:147:14: note: variable tracking size limit exceeded with -fvar-tracking-assignments, retrying without
void TCONCAT(_Test_,name)::_Run()
^
./util/testharness.h:134:23: note: in definition of macro ‘TCONCAT1’
#define TCONCAT1(a,b) a##b
^
./util/testharness.h:147:6: note: in expansion of macro ‘TCONCAT’
void TCONCAT(_Test_,name)::_Run()
^
db/db_iter_test.cc:589:1: note: in expansion of macro ‘TEST’
TEST(DBIteratorTest, DBIterator) {
^
By dividing the test into small tests, it should fix the problem
Test Plan: Run the test
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32679
Summary:
This Diff provides the implementation of the cross functional
test infrastructure. This provides the ability to test a single feature
with every existing regression test in order to identify issues with
interoperability between features.
Test Plan:
Reference implementation of inplace update support cross
functional test. Able to find interoperability issues with inplace
support and ran all of db_test. Will add separate diff for those changes.
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32247
Summary: Add CappedFixTransform, which is the same as fixed length prefix extractor, except that when slice is shorter than the fixed length, it will use the full key.
Test Plan:
Add a test case for
db_test
options_test
and a new test
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: MarkCallaghan, leveldb, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D31887
Summary: DBTest.SharedWriteBuffer uses an Options that doesn't pass CurrentOptions(), so that it doesn't use MockEnv. However, DBTest's constructor uses MockEnv to call DestoryDB() to clean up, causing uncleaned state before it runs.
Test Plan: Run the test modified to make sure they pass default Env and SharedWriteBuffer now passes MockEnv.
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32475
Summary:
There's a bug in TSAN (or libstdc++?) with std::shared_ptr<> for some reason. In db_test, only FlushSchedule is affected.
See more: https://groups.google.com/forum/#!topic/thread-sanitizer/vz_s-t226Vg
With this change and all other @sdong's and mine diffs, our db_test should be TSAN-clean. I'll move to other tests.
Test Plan: no more flush schedule when running TSAN
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: sdong, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32469
Summary: Add a new test case in fault_injection_test, which covers parallel compactions and multiple levels. Use MockEnv to run the new test case to speed it up. Improve MockEnv to avoid DestoryDB(), previously failed when deleting lock files.
Test Plan: Run ./fault_injection_test, including valgrind
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32415
Summary: fault_injection_test occasionally fails because file closing can happen after deletion. Improve the test to support it.
Test Plan: I have a new test case I'm working on, where the issue appears almost every time. With the patch, the problem goes away.
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32373
Summary: Fixed a compile warning in clang in db/listener_test.cc
Test Plan: make listener_test
Reviewers: oridb
Reviewed By: oridb
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D32337
Summary: This adds a listener for compactions, and gives some useful statistics on each compaction pass.
Test Plan: Unit tests.
Reviewers: sdong, igor, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D31641
Summary: I'm not sure the expected results of std::atomic::fetch_sub() when using memory_order_relaxed, and I suspect TSAN complains.
Test Plan: make all check
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32259
Summary:
We see failure of the test in travis but I can't repro it.
Add more logging in failure cases to help us figure out which failure it is.
Also makes synchronization slightly stronger, though there isn't seem to be a problem without it
Test Plan: Run the test
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32319
Summary: log_dir_unsynced_ is a confusing name. Rename it to log_dir_synced_ and flip the value.
Test Plan: Run ./fault_injection_test
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32235
Summary: Currently fault_injection_test has a test case to drop all the unsynced data. Add one more case to take a randomized bytes from it.
Test Plan: Run the test
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32229
Summary:
1. If WAL directory is different from db directory. Sync the directory after creating a log file under it.
2. After creating an SST file, sync its parent directory instead of DB directory.
3. change the check of kResetDeleteUnsyncedFiles in fault_injection_test. Since we changed the behavior to sync log files' parent directory after first WAL sync, instead of creating, kResetDeleteUnsyncedFiles will not guarantee to show post sync updates.
Test Plan: make all check
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32067
Summary:
This is first in a series of diffs that fixes data races detected by thread sanitizer.
Here the problem is that we call Ref() on a column family during a single-threaded write, without holding a mutex.
Test Plan: TSAN is no longer complaining about LevelLimitReopen.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32121
Summary: We should not be calling InternalStats methods outside of the mutex.
Test Plan:
COMPILE_WITH_TSAN=1 m db_test && ROCKSDB_TESTS=CompactionTrigger ./db_test
failing before the diff, works now
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32127
Summary: More race condition bugs with our archive WAL files. I do believe this caused t5988326, but can't reproduce the failure unfortunately.
Test Plan: make check
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32103
Summary: 3 iterations were disabled by mistake by one recent commit, causing CLANG build error. Fix it
Test Plan:
USE_CLANG=1 make fault_injection_test
and run the test
Reviewers: igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32109
Summary: fault_injection_test.cc has two variable names not following the convention fix it.
Test Plan: run the test
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32097
Summary:
Wrapper classes in fault_injection_test doesn't simulate RocksDB Env behavior close enough. Improve it by:
(1) when fsync, don't sync parent
(2) support directory fsync
(3) support multiple directories
Add test cases of
(1) persisting by WAL fsync, not just compact range
(2) different WAL dir
(3) combination of (1) and (2)
(4) data directory is not the same as db name.
Test Plan: Run the test and make sure it passes.
Reviewers: rven, yhchiang, igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32031
Summary: Now we don't sync manifest file when initializing it, so DB cannot be safely reopened before the first mem table flush. Fix it by syncing it. This fixes fault_injection_test.
Test Plan: make all check
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32001
Summary:
I saw this when running readrandom benchmark with corrupted database -- benchmark worked!
If a Get() returns corruption we should probably abort.
Test Plan: compiles
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31701
Summary: GetLiveFilesMetaData() already adds a leading "/" in file name. No need to add one extra "/" in DBImpl::CheckConsistency()
Test Plan: make all check
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D31779
Summary:
This patch remove the unnecessary Compaction::ReleaseInputs().
Compaction::ReleaseInputs() tries to unref its input_version
and column_family. However, such unref is always done in
~Compaction(), and all current ReleaseInputs() calls are
right before the destructor.
Test Plan: ./db_test
Reviewers: igor
Reviewed By: igor
Subscribers: igor, rven, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D31605
Summary:
This is a port of [[ https://github.com/google/leveldb/blob/master/db/fault_injection_test.cc | LevelDB's fault_injection_test ]] to RocksDB. Unfortunately it fails with:
```
==== Test FaultInjectionTest.FaultTest
db/fault_injection_test.cc:491: Corruption: no meta-nextfile entry in descriptor
#0 ./fault_injection_test() [0x41477a] rocksdb::FaultInjectionTest::PartialCompactTestReopenWithFault(rocksdb::FaultInjectionTest::ResetMethod, int, int) /data/users/tomdzk/rocksdb/db/fault_injection_test.cc:491
#1 ./fault_injection_test() [0x40a38a] rocksdb::_Test_FaultTest::_Run() /data/users/tomdzk/rocksdb/db/fault_injection_test.cc:517
#2 ./fault_injection_test() [0x415bea] rocksdb::_Test_FaultTest::_RunIt() /data/users/tomdzk/rocksdb/db/fault_injection_test.cc:507
#3 ./fault_injection_test() [0x584367] rocksdb::test::RunAllTests() /data/users/tomdzk/rocksdb/util/testharness.cc:70
#4 /usr/local/fbcode/gcc-4.8.1-glibc-2.17/lib/libc.so.6(__libc_start_main+0x10e) [0x7f7a40857efe] ?? ??:0
#5 ./fault_injection_test() [0x408bb8] _start ??:0
```
so I commented out the test invocation in the source code for now (lines 514-520) so it can be merged.
Test Plan: This is a new test.
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31587
Summary:
This diff adds BlockBasedTable format_version = 2. New format version brings better compressed block format for these compressions:
1) Zlib -- encode decompressed size in compressed block header
2) BZip2 -- encode decompressed size in compressed block header
3) LZ4 and LZ4HC -- instead of doing memcpy of size_t encode size as varint32. memcpy is very bad because the DB is not portable accross big/little endian machines or even platforms where size_t might be 8 or 4 bytes.
It does not affect format for snappy.
If you write a new database with format_version = 2, it will not be readable by RocksDB versions before 3.10. DB::Open() will return corruption in that case.
Test Plan:
Added a new test in db_test.
I will also run db_bench and verify VSIZE when block_cache == 1GB
Reviewers: yhchiang, rven, MarkCallaghan, dhruba, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31461
Test Plan: Compile. Run it.
Reviewers: yhchiang, dhruba, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D31479
Summary: We keep checksum functions in util/, there is no reason for compression to be in port/
Test Plan: compiles
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31281
Summary:
Create a benchmark for testing memtablereps. This diff is a bit rough, but it should do the trick until other bootcampers can clean it up.
Addressing comments
Removed the mutexes
Changed ReadWriteBenchmark to fix number of reads and count the number of writes we can perform in that time.
Test Plan:
Run it.
Below runs pass
./memtablerep_bench --benchmarks fillrandom,readrandom --memtablerep skiplist
./memtablerep_bench --benchmarks fillseq,readseq --memtablerep skiplist
./memtablerep_bench --benchmarks readwrite,seqreadwrite --memtablerep skiplist --num_operations 200 --num_threads 5
./memtablerep_bench --benchmarks fillrandom,readrandom --memtablerep hashskiplist
./memtablerep_bench --benchmarks fillseq,readseq --memtablerep hashskiplist
--num_scans 2
./memtablerep_bench --benchmarks fillseq,readseq --memtablerep vector
Reviewers: jpaton, ikabiljo, sdong
Reviewed By: sdong
Subscribers: dhruba, ameyag
Differential Revision: https://reviews.facebook.net/D22683
Summary: Add comments in db.h to help users discover their options.
Test Plan: Compile
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: MarkCallaghan, yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31077
Summary: Add an extra assert to make sure current version is included in VersionSet::AddLiveFiles().
Test Plan: make all check
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, hermanlee4, leveldb
Differential Revision: https://reviews.facebook.net/D30819
Summary: During recovery, VersionBuilder::Apply() was called multiple times. If the DB is open for long enough, most of files added earlier will be deleted by later deletes. In current solution, sorting added file happens first and then deletes are applied. In this patch, deletes are applied when possible inside Apply(), which can significantly reduce the sorting time in some cases.
Test Plan:
Add unit tests in version_builder
valgrind_check
Open a manifest of 50MB, with 9K live files. The manifest read time reduced from 1.6 seconds to 0.7 seconds.
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30765
Summary:
This patch changes concurrency guarantees around ColumnFamilySet::column_families_ and ColumnFamilySet::column_families_data_.
Before:
* When mutating: lock DB mutex and spin lock
* When reading: lock DB mutex OR spin lock
After:
* When mutating: lock DB mutex and be in write thread
* When reading: lock DB mutex or be in write thread
That way, we eliminate the spin lock that protects these hash maps and simplify concurrency. That means we don't need to lock the spin lock during writing, since writing is mutually exclusive with column family create/drop (the only operations that mutate those hash maps).
With these new restrictions, I also needed to move column family create to the write thread (column family drop was already in the write thread).
Even though we don't need to lock the spin lock during write, impact on performance should be minimal -- the spin lock is almost never busy, so locking it is almost free.
This addresses task t5116919.
Test Plan:
make check
Stress test with lots and lots of column family drop and create:
time ./db_stress --threads=30 --ops_per_thread=5000000 --max_key=5000 --column_families=200 --clear_column_family_one_in=100000 --verify_before_write=0 --reopen=15 --max_background_compactions=10 --max_background_flushes=10 --db=/fast-rocksdb-tmp/db_stress/
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30651
Summary: When trivial move commit is done, we log the summary of the input version instead of current. This is inconsistent with other log messages and confusing.
Test Plan: compiles
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30939
Summary:
A command line like this to run all the tests:
source benchmark.config.sh && nohup ./benchmark.sh 'bulkload,fillseq,overwrite,filluniquerandom,readrandom,readwhilewriting'
where
benchmark.config.sh is:
export DB_DIR=/data/mysql/rocksdata
export WAL_DIR=/txlogs/rockswal
export OUTPUT_DIR=/root/rocks_benchmarking/output
Will fail for the tests that need a new DB .
Also 1) set disable_data_sync=0 and 2) add debug mode to run through all the tests more quickly
Test Plan: run ./benchmark.sh 'debug,bulkload,fillseq,overwrite,filluniquerandom,readrandom,readwhilewriting' and verify that there are no complaints about WAL dir not being empty.
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D30909
Summary:
Since https://reviews.facebook.net/D16119, we ignore partial tailing writes. Because of that, we no longer need skip_log_error_on_recovery.
The documentation says "Skip log corruption error on recovery (If client is ok with losing most recent changes)", while the option actually ignores any corruption of the WAL (not only just the most recent changes). This is very dangerous and can lead to DB inconsistencies. This was originally set up to ignore partial tailing writes, which we now do automatically (after D16119). I have digged up old task t2416297 which confirms my findings.
Test Plan: There was actually no tests that verified correct behavior of skip_log_error_on_recovery.
Reviewers: yhchiang, rven, dhruba, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30603
Summary:
This is a serious bug. If paranod_check == true and WAL is corrupted, we don't fail DB::Open(). I tried going into history and it seems we've been doing this for a long long time.
I found this when investigating t5852041.
Test Plan: Added unit test to verify correct behavior.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30597
Summary: CLANG was broken for a recent change in db_ench. Fix it.
Test Plan: Build db_bench using CLANG.
Reviewers: rven, igor, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30801
Summary:
Add structures for exposing events and operations. Event describes
high-level action about a thread such as doing compaciton or
doing flush, while an operation describes lower-level action
of a thread such as reading / writing a SST table, waiting for
mutex. Events and operations are designed to be independent.
One thread would typically involve in one event and one operation.
Code instrument will be in a separate diff.
Test Plan:
Add unit-tests in thread_list_test
make dbg -j32
./thread_list_test
export ROCKSDB_TESTS=ThreadList
./db_test
Reviewers: ljin, igor, sdong
Reviewed By: sdong
Subscribers: rven, jonahcohen, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29781
Summary: Having --num_hot_column_families default on fails some existing regression tests. By default turn it off
Test Plan: Run db_bench to make sure it is default off.
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D30705
Summary:
Add option --num_hot_column_families in db_bench. If it is set, write options will first write to that number of column families, and then move on to next set of hot column families. The working set of column families can be smaller than total number of CFs.
It is to test how RocksDB can handle cold column families
Test Plan: Run db_bench with --num_hot_column_families set and not set.
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30663
Dike out the body of VerifyCompactionResult. With assert() compiled out, the
loop index variable in the inner loop was unused, breaking the build when
-Werror is enabled.
Summary:
GetThreadList() feature depends on the thread creation and destruction, which is currently handled under Env.
This patch moves GetThreadList() feature under Env to better manage the dependency of GetThreadList() feature
on thread creation and destruction.
Renamed ThreadStatusImpl to ThreadStatusUpdater. Add ThreadStatusUtil, which is a static class contains
utility functions for ThreadStatusUpdater.
Test Plan: run db_test, thread_list_test and db_bench and verify the life cycle of Env and ThreadStatusUpdater is properly managed.
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: ljin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30057
Summary: As title. We shouldn't need to execute flush from compaction if there are dedicated threads doing flushes.
Test Plan: make check
Reviewers: rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30579
Summary:
There are two versions of FindObsoleteFiles():
* full scan, which is executed every 6 hours (and it's terribly slow)
* no full scan, which is executed every time a background process finishes and iterator is deleted
This diff is optimizing the second case (no full scan). Here's what we do before the diff:
* Get the list of obsolete files (files with ref==0). Some files in obsolete_files set might actually be live.
* Get the list of live files to avoid deleting files that are live.
* Delete files that are in obsolete_files and not in live_files.
After this diff:
* The only files with ref==0 that are still live are files that have been part of move compaction. Don't include moved files in obsolete_files.
* Get the list of obsolete files (which exclude moved files).
* No need to get the list of live files, since all files in obsolete_files need to be deleted.
I'll post the benchmark results, but you can get the feel of it here: https://reviews.facebook.net/D30123
This depends on D30123.
P.S. We should do full scan only in failure scenarios, not every 6 hours. I'll do this in a follow-up diff.
Test Plan:
One new unit test. Made sure that unit test fails if we don't have a `if (!f->moved)` safeguard in ~Version.
make check
Big number of compactions and flushes:
./db_stress --threads=30 --ops_per_thread=20000000 --max_key=10000 --column_families=20 --clear_column_family_one_in=10000000 --verify_before_write=0 --reopen=15 --max_background_compactions=10 --max_background_flushes=10 --db=/fast-rocksdb-tmp/db_stress --prefixpercent=0 --iterpercent=0 --writepercent=75 --db_write_buffer_size=2000000
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30249
Summary:
This one wasn't easy to find :)
What happens is we go through all cfds on flush_queue_ and find no cfds to flush, *but* the cfd is set to the last CF we looped through and following code assumes we want it flushed.
BTW @sdong do you think we should also make BackgroundFlush() only check a single cfd for flushing instead of doing this `while (!flush_queue_.empty())`?
Test Plan: regression test no longer fails
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: sdong, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30591
Summary:
When scaling to higher number of column families, the worst bottleneck was MaybeScheduleFlushOrCompaction(), which did a for loop over all column families while holding a mutex. This patch addresses the issue.
The approach is similar to our earlier efforts: instead of a pull-model, where we do something for every column family, we can do a push-based model -- when we detect that column family is ready to be flushed/compacted, we add it to the flush_queue_/compaction_queue_. That way we don't need to loop over every column family in MaybeScheduleFlushOrCompaction.
Here are the performance results:
Command:
./db_bench --write_buffer_size=268435456 --db_write_buffer_size=268435456 --db=/fast-rocksdb-tmp/rocks_lots_of_cf --use_existing_db=0 --open_files=55000 --statistics=1 --histogram=1 --disable_data_sync=1 --max_write_buffer_number=2 --sync=0 --benchmarks=fillrandom --threads=16 --num_column_families=5000 --disable_wal=1 --max_background_flushes=16 --max_background_compactions=16 --level0_file_num_compaction_trigger=2 --level0_slowdown_writes_trigger=2 --level0_stop_writes_trigger=3 --hard_rate_limit=1 --num=33333333 --writes=33333333
Before the patch:
fillrandom : 26.950 micros/op 37105 ops/sec; 4.1 MB/s
After the patch:
fillrandom : 17.404 micros/op 57456 ops/sec; 6.4 MB/s
Next bottleneck is VersionSet::AddLiveFiles, which is painfully slow when we have a lot of files. This is coming in the next patch, but when I removed that code, here's what I got:
fillrandom : 7.590 micros/op 131758 ops/sec; 14.6 MB/s
Test Plan:
make check
two stress tests:
Big number of compactions and flushes:
./db_stress --threads=30 --ops_per_thread=20000000 --max_key=10000 --column_families=20 --clear_column_family_one_in=10000000 --verify_before_write=0 --reopen=15 --max_background_compactions=10 --max_background_flushes=10 --db=/fast-rocksdb-tmp/db_stress --prefixpercent=0 --iterpercent=0 --writepercent=75 --db_write_buffer_size=2000000
max_background_flushes=0, to verify that this case also works correctly
./db_stress --threads=30 --ops_per_thread=2000000 --max_key=10000 --column_families=20 --clear_column_family_one_in=10000000 --verify_before_write=0 --reopen=3 --max_background_compactions=3 --max_background_flushes=0 --db=/fast-rocksdb-tmp/db_stress --prefixpercent=0 --iterpercent=0 --writepercent=75 --db_write_buffer_size=2000000
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30123
Summary: Avoid unnecessary unlock and lock mutex when notifying events.
Test Plan: ./listener_test
Reviewers: igor
Reviewed By: igor
Subscribers: sdong, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30267
Summary:
We now release the mutex before copying the files in the case
of the trivial move. This path does not use the compaction job.
Test Plan: DBTest.LevelCompactionThirdPath
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30381
Summary:
Allow Level-style compaction to place files in different paths
This diff provides the code for task 4854591. We now support level-compaction
to place files in different paths by specifying them in db_paths along with
the minimum level for files to store in that path.
Test Plan: ManualLevelCompactionOutputPathId in db_test.cc
Reviewers: yhchiang, MarkCallaghan, dhruba, yoshinorim, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29799
Summary:
ASAN build fails once for this error:
14:04:52 ==== Test DBTest.CompactFilesOnLevelCompaction
14:04:52 db_test: db/version_set.cc:1062: void rocksdb::VersionStorageInfo::AddFile(int, rocksdb::FileMetaData*): Assertion `level <= 0 || level_files->empty() || internal_comparator_->Compare( (*level_files)[level_files->size() - 1]->largest, f->smallest) < 0' failed.
Not abling figure out reason. We use std:vector for sorting for save and add one more assert to help figure out whether it is the sorting's problem.
Test Plan: make all check
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D30117
Summary: Now DB::GetSnapshot() doesn't scale to more column families, as it needs to go through all the column families to find whether snapshot is supported. This patch optimizes it.
Test Plan:
Add unit tests to cover negative cases.
make all check
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30093
Summary: Set operations in VerisonBuilder is shown as a performance bottleneck of restarting DB when there are lots of files. Make both of added_files and deleted_files use unordered set or map. Only when adding the files, sort the added files.
Test Plan: make all check
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: hermanlee4, leveldb, dhruba, ljin
Differential Revision: https://reviews.facebook.net/D30051
Summary: This is a regression bug introduced by https://reviews.facebook.net/D24729 . max_total_wal_size would be off the target it should be more and more in the case that the a user holds the current super version after flush or compaction. This patch fixes it
Test Plan: make all check
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: ljin, yoshinorim, MarkCallaghan, hermanlee4, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29961
Summary: When wal_dir is used, DestroyDB is not passed the wal_dir option and so we get a Corruption exception.
Test Plan:
Verified manually that the following command line works now:
./db_bench --db=/mnt/db/rocksdb ... --disable_wal=0 --wal_dir=/data/users/rocksdb/WAL... --benchmarks=filluniquerandom --use_existing_db=0...
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29859
Summary:
Add a counter in SnapshotList to show number of snapshots. Also a unix timestamp in every snapshot.
Add two DB Properties to return number of snapshots and timestamp of the oldest one.
Test Plan: Add unit test checking
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D29919
Summary:
Remove the use of exception in WriteBatch::Handler. Now the default
implementations of Put, Merge, and Delete in WriteBatch::Handler are no-op.
Test Plan:
Add three test cases in write_batch_test
./write_batch_test
Reviewers: sdong, igor
Reviewed By: sdong, igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29835
Summary: Replace exception by setting valid_ = false in DBIter::MergeValuesNewToOld().
Test Plan:
Not sure if I am right at this, but it seems we currently don't have a good
way to test that code path as it requires dynamically set merge_operator = nullptr
at the time while Merge() is calling.
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29811
Summary:
Introduces a new class for managing write buffer memory across column
families. We supplement ColumnFamilyOptions::write_buffer_size with
ColumnFamilyOptions::write_buffer, a shared pointer to a WriteBuffer
instance that enforces memory limits before flushing out to disk.
Test Plan: Added SharedWriteBuffer unit test to db_test.cc
Reviewers: sdong, rven, ljin, igor
Reviewed By: igor
Subscribers: tnovak, yhchiang, dhruba, xjin, MarkCallaghan, yoshinorim
Differential Revision: https://reviews.facebook.net/D22581
Summary:
Two fixes:
1. if cpplint is not present on the system, don't return a confusing error in the linter
2. Add include_alpha, which means our includes should be sorted lexicographically
Test Plan: Tried unsorting our includes, lint complained
Reviewers: rven, ljin, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28845
Summary: Block Universal and FIFO compactions in ROCKSDB_LITE
Test Plan:
make shared_lib -j32
make OPT=-DROCKSDB_LITE shared_lib
Reviewers: ljin, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29589
Summary:
db_imp_readonly.o is one of the big obj file. If it's not a necessary
feature, we should probably block it in ROCKSDB_LITE.
1322704 Nov 24 16:55 db/db_impl_readonly.o
Test Plan:
make shared_lib -j32
make ROCKSDB_LITE shared_lib -j32
Reviewers: ljin, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29583
Summary: Block internal_stats in ROCKSDB_LITE.
Test Plan: make OPT=-DROCKSDB_LITE shared_lib
Reviewers: ljin, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29541
Summary:
In some environment such as android, the c++ library does not have
std::to_string. This path adds rocksdb::ToString(), which wraps std::to_string
when std::to_string is not available, and implements std::to_string
in the other case.
Test Plan:
make dbg -j32
./db_test
make clean
make dbg OPT=-DOS_ANDROID -j32
./db_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29181
Summary:
This compaction trigger does not seem to test any thing specific to
cuckoo table. Remove it.
Test Plan: make all check
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29523
Summary:
Reported by bootcamper
This causes ldb tool to fail the assertion in ~ColumnFamilyData()
Test Plan:
./ldb --db=/tmp/test_db1 --create_if_missing put a1 b1
./ldb manifest_dump --path=/tmp/test_db1/MANIFEST-000001
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29517
Summary: Free checkpoint after its directory is removed.
Test Plan: Run valgrind with GetSnapshotLink.
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29493
Summary:
An entry of ConstantColumnFamilyInfo is created when:
1. DB::Open
2. CreateColumnFamily.
However, there are cases that DB::Open could also call CreateColumnFamily
when create_missing_column_families=true. As a result, it will create
duplicate ConstantColumnFamilyInfo and one of them would be leaked.
Test Plan: ./deletefile_test
Reviewers: igor, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29307
Summary: "build all" breaks in Clang mode with db_bench. Fix it.
Test Plan: USE_CLANG=1 make all
Reviewers: ljin, rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D29379
Summary: Improve listener_test by ensuring flushes are completed before assert.
Test Plan: listener_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29319
Summary: stringSplit is not how we name our functions. Also, we had two StringSplit's in the codebase
Test Plan: make check
Reviewers: yhchiang, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29361
Summary:
Add enable_thread_tracking to DBOptions to allow
tracking thread status related to the DB. Default is off.
Test Plan:
export ROCKSDB_TESTS=ThreadList
./db_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29289
Summary:
Add GetThreadList API, which allows developer to track the
status of each process. Currently, calling GetThreadList will
only get the list of background threads in RocksDB with their
thread-id and thread-type (priority) set. Will add more support
on this in the later diffs.
ThreadStatus currently has the following properties:
// An unique ID for the thread.
const uint64_t thread_id;
// The type of the thread, it could be ROCKSDB_HIGH_PRIORITY,
// ROCKSDB_LOW_PRIORITY, and USER_THREAD
const ThreadType thread_type;
// The name of the DB instance where the thread is currently
// involved with. It would be set to empty string if the thread
// does not involve in any DB operation.
const std::string db_name;
// The name of the column family where the thread is currently
// It would be set to empty string if the thread does not involve
// in any column family.
const std::string cf_name;
// The event that the current thread is involved.
// It would be set to empty string if the information about event
// is not currently available.
Test Plan:
./thread_list_test
export ROCKSDB_TESTS=GetThreadList
./db_test
Reviewers: rven, igor, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D25047
Summary:
The very last reference happens in DBImpl::GetOptions()
I built with both DBImpl::GetOptions() and ColumnFamilyData::options() commented out
Test Plan: make all check
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29073
Summary: Fixed a bug which could hide non-ok status in CompactionJob::Run()
Test Plan: make
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28995
Summary: This way we can gurantee that old MemTables get destructed before DBImpl gets destructed, which might be useful if we want to make them depend on state from DBImpl.
Test Plan: make check with asserts in JobContext's destructor
Reviewers: ljin, sdong, yhchiang, rven, jonahcohen
Reviewed By: jonahcohen
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28959
Summary: Store links to live files in directory on same disk
Test Plan:
Take snapshot and open it. Added a test GetSnapshotLink in
db_test.
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28713
Summary:
This is just a simple test that passes two files though a compaction. It shows the framework so that people can continue building new compaction *unit* tests.
In the future we might want to move some Compaction* tests from DBTest here. For example, CompactBetweenSnapshot seems a good candidate.
Hopefully this test can be simpler when we mock out VersionSet.
Test Plan: this is a test
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28449
Summary:
Make db_stress built for ROCKSDB_LITE.
The test doesn't pass tough. It seg fault quickly. But I took a look and it doesn't seem to be related to lite version. Likely to be a bug inside RocksDB.
Test Plan: make db_stress
Reviewers: yhchiang, rven, ljin, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28797
Summary: Add a unit test in db_test to verify the behavior when both of merge operator and compaction filter apply to a key when merging.
Test Plan: Run the new test
Reviewers: ljin, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28455
Summary: As a short-term fix, let's go back to previous way of calculating NeedsCompaction(). SIGSEGV happens because NeedsCompaction() can happen before super_version (and thus MutableCFOptions) is initialized.
Test Plan: make check
Reviewers: ljin, sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28875
Summary:
Move NeedsCompaction() from VersionStorageInfo to CompactionPicker
to allow different compaction strategy to have their own way to
determine whether doing compaction is necessary.
When compaction style is set to kCompactionStyleNone, then
NeedsCompaction() will always return false.
Test Plan:
export ROCKSDB_TESTS=Compact
./db_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28719
Summary: So iOS size_t is 32-bit, so we need to static_cast<size_t> any uint64_t :(
Test Plan: TARGET_OS=IOS make static_lib
Reviewers: dhruba, ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28743
Summary: I found that db_stress sometimes segfault on my machine. Fix the bug.
Test Plan: make all check. Run db_stress
Reviewers: ljin, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28803
Summary:
Fixed a bug in GetEstimatedActiveKeys which does not normalized
the sampled information correctly.
Add a test in version_builder_test.
Test Plan: version_builder_test
Reviewers: ljin, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28707
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary: I mistakenly changed the behavior to ++next_file_number_ instead of next_file_number_++, as it should have been: 344edbb044/db/version_set.h (L539)
Test Plan: none. not sure if this would break anything. It's just different behavior, so I'd rather not risk
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28557
Summary:
In D19581 I made `ForwardIterator::status()` check all child iterators,
including immutable ones. It's, however, not necessary to do it every
time -- it'll suffice to check only when they're used and their status
could change.
This diff:
* introduces `immutable_status_` which is updated by `Seek()` and `Next()`
* removes special handling of `kIncomplete` status in those methods
Test Plan:
* `db_test`
* hacked ReadSequential in db_bench.cc to check `status()` in addition to
validity:
```
$ ./db_bench -use_existing_db -benchmarks readseq -disable_auto_compactions \
-use_tailing_iterator # without this patch
Keys: 16 bytes each
Values: 100 bytes each (50 bytes after compression)
Entries: 1000000
[...]
DB path: [/dev/shm/rocksdbtest/dbbench]
readseq : 0.562 micros/op 1778103 ops/sec; 98.4 MB/s
$ ./db_bench -use_existing_db -benchmarks readseq -disable_auto_compactions \
-use_tailing_iterator # with the patch
readseq : 0.433 micros/op 2311363 ops/sec; 127.8 MB/s
```
Reviewers: igor, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb, march, lovro
Differential Revision: https://reviews.facebook.net/D24063
Summary: Based on @sdong's feedback in the diff, we shouldn't keep db_mutex in CompactionJob's state. This diff removes db_mutex from CompactionJob state, by making next_file_number_ atomic. That way we only need to pass the lock to InstallCompactionResults() because of LogAndApply()
Test Plan: make check
Reviewers: ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: sdong, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28491
Summary: Previously I made `make check` work with -Wshadow, but there are some tools that are not compiled using `make check`.
Test Plan: make all
Reviewers: yhchiang, rven, ljin, sdong
Reviewed By: ljin, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28497
Summary:
This diff adds three sets of APIs to RocksDB.
= GetColumnFamilyMetaData =
* This APIs allow users to obtain the current state of a RocksDB instance on one column family.
* See GetColumnFamilyMetaData in include/rocksdb/db.h
= EventListener =
* A virtual class that allows users to implement a set of
call-back functions which will be called when specific
events of a RocksDB instance happens.
* To register EventListener, simply insert an EventListener to ColumnFamilyOptions::listeners
= CompactFiles =
* CompactFiles API inputs a set of file numbers and an output level, and RocksDB
will try to compact those files into the specified level.
= Example =
* Example code can be found in example/compact_files_example.cc, which implements
a simple external compactor using EventListener, GetColumnFamilyMetaData, and
CompactFiles API.
Test Plan:
listener_test
compactor_test
example/compact_files_example
export ROCKSDB_TESTS=CompactFiles
db_test
export ROCKSDB_TESTS=MetaData
db_test
Reviewers: ljin, igor, rven, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D24705
Summary:
Here's a prototype of redesigning pending_outputs_. This way, we don't have to expose pending_outputs_ to other classes (CompactionJob, FlushJob, MemtableList). DBImpl takes care of it.
Still have to write some comments, but should be good enough to start the discussion.
Test Plan: make check, will also run stress test
Reviewers: ljin, sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28353
Summary:
Make PartialCompactionFailure Test more robust again by
blocking background compaction until we simulate the
file creation error.
Test Plan:
export ROCKSDB_TESTS=PartialCompactionFailure
./db_test
Reviewers: sdong, igor, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28431
Summary:
TEST_WaitForFlush should wait until it sees error when parameter is set
to true so we don't need to loop and timeout
Test Plan: ROCKSDB_TESTS=DropWritesFlush ./db_test
Reviewers: sdong, igor
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28419
Summary: Make PartialCompactionFailure Test more robust.
Test Plan:
export ROCKSDB_TESTS=PartialCompactionFailure
./db_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28425
Summary: It turns out that -Wshadow has different rules for gcc than clang. Previous commit fixed clang. This commits fixes the rest of the warnings for gcc.
Test Plan: compiles
Reviewers: ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28131
Summary: In order to avoid random failure of DBTest.GroupCommitTest, artificially sleep 100 microseconds in each log writing.
Test Plan: Run the test in a machine where valgrind version of the test always fails multiple times and see it always succeed.
Reviewers: igor, yhchiang, rven, ljin
Reviewed By: ljin
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28401
Summary: This patch makes it a contract that if an empty write batch is passed to DB::Write() and WriteOptions.sync = true, fsync is called to WAL.
Test Plan: A new unit test
Reviewers: ljin, rven, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, MarkCallaghan, leveldb
Differential Revision: https://reviews.facebook.net/D28365
Summary:
1. fix possible overflow of the two stats by using uint64_t
2. use a similar source of data to calculate RecordDrop. Previous one is not correct.
Test Plan: See outputs of db_bench settings, and the results look reasonable
Reviewers: MarkCallaghan, ljin, igor
Reviewed By: igor
Subscribers: rven, leveldb, yhchiang, dhruba
Differential Revision: https://reviews.facebook.net/D28155
If a compaction filter implementation is simply filtering values, then
allocating the "changed values" bitmap is an extra memory allocation
that adds no value. Additionally, the compaction implementation has to
do marginally more work to calculate the offset into the bitmap
(vector<bool> specialization) for each record the filter did not mark
for deletion.
Explicitly handle the case where compact_->value_changed_buf_ is empty.
Summary: as title
Test Plan: ./db_test
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28269
Summary: as title
Test Plan: ran it
Reviewers: yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28311
Summary: Replace some ASSERT_TRUE() to ASSERT_GT() and ASSERT_LT() so that in case the assert is triggered, the value is printed out.
Test Plan: Run the two tests
Reviewers: ljin, rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28293
Summary:
Now DBTest.DynamicMemtableOptions sets background compaction to be 4, without actually increasing thread pool size (even before the feature of automatic increasing it). To make sure the behavior stays the same after the automatic thread pool increasing, set it back to 1.
Hopefully it can fix the occasional failure of the test.
Test Plan: Run the test
Reviewers: igor, ljin
Reviewed By: ljin
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28281
Summary: Apply InfoLogLevel to the logs in db/compaction_job.cc
Test Plan: db_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: leveldb, MarkCallaghan, dhruba
Differential Revision: https://reviews.facebook.net/D28275
Summary: Apply InfoLogLevel to the logs in db/version_set.cc
Test Plan: make
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27879
Summary: Apply InfoLogLevel to the logs in db/wal_manager.cc
Test Plan: db_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28239
Summary: Apply InfoLogLevel to the logs in db/db_impl.cc
Test Plan:
db_test
db_bench
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: leveldb, MarkCallaghan, dhruba
Differential Revision: https://reviews.facebook.net/D28233
Summary: Enforce the accessier naming convention in functions in version_set.h
Test Plan: make all check
Reviewers: ljin, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28143
Summary:
With the patch, thread pool size will be automatically increased if DB's options ask for more parallelism of compactions or flushes.
Too many users have been confused by the API. Change it to make it harder for users to make mistakes
Test Plan: Add two unit tests to cover the function.
Reviewers: yhchiang, rven, igor, MarkCallaghan, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27555
Summary: Move all the logic of VersionBuilder to a separate .cc file
Test Plan: make all check
Reviewers: ljin, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28083
Summary:
Long awaited CompactionJob class! Move most compaction-related things from DBImpl to CompactionJob, making CompactionJob easier to test and understand.
Currently this is just replicating exactly the same functionality with as little as change as possible. As future work, we should:
1. Add CompactionJob tests (I think I'll do that tomorrow)
2. Reduce CompactionJob's state that it inherits from DBImpl
3. Figure out how to do yielding to flush better. Currently I implemented a callback as we agreed yesterday, but I don't think it's a good long term solution.
This reduces db_impl.cc from 5000+ LOC to 3400!
Test Plan: make check, will add CompactionJob-specific tests, probably also move some tests from db_test to compaction_job_test
Reviewers: rven, yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27957
Summary:
TestMemEnv simulates all Env APIs using in-memory data structures.
We can use it to speed up db_test run, which is now reduced ~7mins when it is
enabled.
We can also add features to simulate power/disk failures in the next
step
TestMemEnv is derived from helper/mem_env
mem_env can not be used for rocksdb since some of its APIs do not give
the same results as env_posix. And its file read/write is not thread safe
Test Plan:
make all -j32
./db_test
./env_mem_test
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28035
Summary: as title
Test Plan: make release
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28053
Summary: as title
Test Plan: ./c_test
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28119
Summary: now we use %8d for RecordIn and %10d for RecordDrop, which is far too small for some use cases. Extend both of them to %12d.
Test Plan: run one test in db_test and see the LOG file.
Reviewers: igor, MarkCallaghan, ljin
Reviewed By: ljin
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28041
Summary: BaseReferencedVersionBuilder now unreference version before destructing VersionBuilder, which is wrong. Fix it.
Test Plan:
make all check
valgrind test to tests that used to fail
Reviewers: igor, yhchiang, rven, ljin
Reviewed By: ljin
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28101
Summary:
...and fix all the errors :)
Jim suggested turning on -Wshadow because it helped him fix number of critical bugs in fbcode. I think it's a good idea to be -Wshadow clean.
Test Plan: compiles
Reviewers: yhchiang, rven, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27711
Summary:
Rename Version::Builder to VersionBuilder and expose its definition to a header.
Make VerisonBuilder not reference Version or ColumnFamilyData, only working with VersionStorageInfo.
Add version_builder_test which has a simple test.
Test Plan: make all check
Reviewers: rven, yhchiang, igor, ljin
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D27969
Summary: Apply InfoLogLevel to the logs in db/db_iter.cc
Test Plan: make
Reviewers: igor, ljin, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27861
Summary: CompactionPickerTest.Level1Trigger2 now depends on the STL implementation to be correct. Fix it.
Test Plan: Run the test
Reviewers: ljin, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D27963
Summary: Decoupling code that deals with archived log files outside of DBImpl. That will make this code easier to reason about and test. It will also make the code easier to improve, because an improver doesn't have to understand DBImpl code in entirety.
Test Plan: added test
Reviewers: ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27873
Summary:
comparator_db_test now adds verification for three more comparators:
(1) one that store double as string
(2) one that cast uint64 to string
(3) one that concatenate two strings, prefixing their sizes.
(4) one that order by hash of the string
Test Plan:
Run ./comparator_db_test
Reviewers: ljin, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D27927
Summary:
Increase the level size so that impact of a single file is smaller.
Also relax the bound
Test Plan: ran locally
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27939
Summary: Add a new unit test in compaction_picker_test to make sure level-based compaction to pick up the level with the largest score.
Test Plan: Run the new test
Reviewers: ljin, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D27933
Summary:
Add some helper functions to make sure DB works well for non-default comparators.
Add a test for SimpleSuffixReverseComparator.
Test Plan: Run the new test
Reviewers: ljin, rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D27831
Igor Canadi