Summary:
The existing implementation does not guarantee bytes reach disk every `bytes_per_sync` when writing SST files, or every `wal_bytes_per_sync` when writing WALs. This can cause confusing behavior for users who enable this feature to avoid large syncs during flush and compaction, but then end up hitting them anyways.
My understanding of the existing behavior is we used `sync_file_range` with `SYNC_FILE_RANGE_WRITE` to submit ranges for async writeback, such that we could continue processing the next range of bytes while that I/O is happening. I believe we can preserve that benefit while also limiting how far the processing can get ahead of the I/O, which prevents huge syncs from happening when the file finishes.
Consider this `sync_file_range` usage: `sync_file_range(fd_, 0, static_cast<off_t>(offset + nbytes), SYNC_FILE_RANGE_WAIT_BEFORE | SYNC_FILE_RANGE_WRITE)`. Expanding the range to start at 0 and adding the `SYNC_FILE_RANGE_WAIT_BEFORE` flag causes any pending writeback (like from a previous call to `sync_file_range`) to finish before it proceeds to submit the latest `nbytes` for writeback. The latest `nbytes` are still written back asynchronously, unless processing exceeds I/O speed, in which case the following `sync_file_range` will need to wait on it.
There is a second change in this PR to use `fdatasync` when `sync_file_range` is unavailable (determined statically) or has some known problem with the underlying filesystem (determined dynamically).
The above two changes only apply when the user enables a new option, `strict_bytes_per_sync`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5183
Differential Revision: D14953553
Pulled By: siying
fbshipit-source-id: 445c3862e019fb7b470f9c7f314fc231b62706e9
Summary:
This PR allows RocksDB to run in single-primary, multi-secondary process mode.
The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary.
Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`.
This PR has several components:
1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary.
2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue.
3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`.
3.1 Tail the primary's MANIFEST during recovery.
3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`.
3.3 Tailing WAL will be in a future PR.
4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899
Differential Revision: D14510945
Pulled By: riversand963
fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
Summary:
- Original commit: a4fb1f8c04
- Revert commit (we reverted as a quick fix to get crash tests passing): 6afe22db2e
This PR includes the contents of the original commit plus two bug fixes, which are:
- In whitebox crash test, only set `--expected_values_path` for `db_stress` runs in the first half of the crash test's duration. In the second half, a fresh DB is created for each `db_stress` run, so we cannot maintain expected state across `db_stress` runs.
- Made `Exists()` return true for `UNKNOWN_SENTINEL` values. I previously had an assert in `Exists()` that value was not `UNKNOWN_SENTINEL`. But it is possible for post-crash-recovery expected values to be `UNKNOWN_SENTINEL` (i.e., if the crash happens in the middle of an update), in which case this assertion would be tripped. The effect of returning true in this case is there may be cases where a `SingleDelete` deletes no data. But if we had returned false, the effect would be calling `SingleDelete` on a key with multiple older versions, which is not supported.
Closes https://github.com/facebook/rocksdb/pull/3793
Differential Revision: D7811671
Pulled By: ajkr
fbshipit-source-id: 67e0295bfb1695ff9674837f2e05bb29c50efc30
Summary:
crash-recovery verification is failing in the whitebox testing, which may or may not be a valid correctness issue -- need more time to investigate. In the meantime, reverting so we don't mask other failures.
Closes https://github.com/facebook/rocksdb/pull/3786
Differential Revision: D7794516
Pulled By: ajkr
fbshipit-source-id: 28ccdfdb9ec9b3b0fb08c15cbf9d2e282201ff33
Summary:
Previously, our `db_stress` tool held the expected state of the DB in-memory, so after crash-recovery, there was no way to verify data correctness. This PR adds an option, `--expected_values_file`, which specifies a file holding the expected values.
In black-box testing, the `db_stress` process can be killed arbitrarily, so updates to the `--expected_values_file` must be atomic. We achieve this by `mmap`ing the file and relying on `std::atomic<uint32_t>` for atomicity. Actually this doesn't provide a total guarantee on what we want as `std::atomic<uint32_t>` could, in theory, be translated into multiple stores surrounded by a mutex. We can verify our assumption by looking at `std::atomic::is_always_lock_free`.
For the `mmap`'d file, we didn't have an existing way to expose its contents as a raw memory buffer. This PR adds it in the `Env::NewMemoryMappedFileBuffer` function, and `MemoryMappedFileBuffer` class.
`db_crashtest.py` is updated to use an expected values file for black-box testing. On the first iteration (when the DB is created), an empty file is provided as `db_stress` will populate it when it runs. On subsequent iterations, that same filename is provided so `db_stress` can check the data is as expected on startup.
Closes https://github.com/facebook/rocksdb/pull/3629
Differential Revision: D7463144
Pulled By: ajkr
fbshipit-source-id: c8f3e82c93e045a90055e2468316be155633bd8b
Summary:
Add a simple policy for NVMe write time life hint
Closes https://github.com/facebook/rocksdb/pull/3095
Differential Revision: D6298030
Pulled By: shligit
fbshipit-source-id: 9a72a42e32e92193af11599eb71f0cf77448e24d
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
Force people to write something other than file name while returning status for IOError.
Closes https://github.com/facebook/rocksdb/pull/2493
Differential Revision: D5321309
Pulled By: siying
fbshipit-source-id: 38bcf6c19e80831cd3e300a047e975cbb131d822
Summary:
Every time after a compaction/flush finish, we issue user reads to put the table into block cache which includes a couple of IO that read footer, index blocks, meta block, etc. So we implement Prefetch here to reduce IO.
Closes https://github.com/facebook/rocksdb/pull/2196
Differential Revision: D4931782
Pulled By: lightmark
fbshipit-source-id: 5a13d58dcab209964352322217193bbf7ff78149
Summary:
Replacement of #2147
The change was squashed due to a lot of conflicts.
Closes https://github.com/facebook/rocksdb/pull/2194
Differential Revision: D4929799
Pulled By: siying
fbshipit-source-id: 5cd49c254737a1d5ac13f3c035f128e86524c581
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
