Summary:
Expanded `all_params` to include all parameters crash test may set. Previously, `atomic_flush` was not included in `all_params` and thus was not visible to `finalize_and_sanitize()`. The consequence was manual crash test runs could provide unsafe combinations of parameters to `db_stress`. For example, running `db_crashtest.py` with `-atomic_flush=0` could cause `db_stress` to run with `-atomic_flush=0 -disable_wal=1`, which is known to produce inconsistencies across column families.
While expanding `all_params`, I found we cannot have an entry in it for both `db_stress` and `db_crashtest.py`. So I renamed `enable_tiered_storage` to `test_tiered_storage` for `db_crashtest.py`, which appears more conventional anyways.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10654
Reviewed By: hx235
Differential Revision: D39369349
Pulled By: ajkr
fbshipit-source-id: 31d9010c760c868b20d5e9bd78ba75c8ff3ce348
Summary:
Historically, `BlobFileReader` has returned the blob(s) read from the file
in the `PinnableSlice` provided by the client. This interface was
preserved when caching was implemented for blobs, which meant that
the blob data was copied multiple times when caching was in use: first,
into the client-provided `PinnableSlice` (by `BlobFileReader::SaveValue`),
and then, into the object stored in the cache (by `BlobSource::PutBlobIntoCache`).
The patch eliminates these copies and the related allocations by changing
`BlobFileReader` so it returns its results in the form of heap-allocated `BlobContents`
objects that can be directly inserted into the cache. The allocations backing
these `BlobContents` objects are made using the blob cache's allocator if the
blobs are to be inserted into the cache (i.e. if a cache is configured and the
`fill_cache` read option is set). Note: this PR focuses on the common case when
blobs are compressed; some further small optimizations are possible for uncompressed
blobs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10647
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D39335185
Pulled By: ltamasi
fbshipit-source-id: 464503d60a5520d654c8273ffb8efd5d1bcd7b36
Summary:
Although we've been tracking SST unique IDs in the DB manifest
unconditionally, checking has been opt-in and with an extra pass at DB::Open
time. This changes the behavior of `verify_sst_unique_id_in_manifest` to
check unique ID against manifest every time an SST file is opened through
table cache (normal DB operations), replacing the explicit pass over files
at DB::Open time. This change also enables the option by default and
removes the "EXPERIMENTAL" designation.
One possible criticism is that the option no longer ensures the integrity
of a DB at Open time. This is far from an all-or-nothing issue. Verifying
the IDs of all SST files hardly ensures all the data in the DB is readable.
(VerifyChecksum is supposed to do that.) Also, with
max_open_files=-1 (default, extremely common), all SST files are
opened at DB::Open time anyway.
Implementation details:
* `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass
that is now removed.
* Unit tests that manipulate/corrupt table properties have to opt out of
this check, because that corrupts the "actual" unique id. (And even for
testing we don't currently have a mechanism to set "no unique id"
in the in-memory file metadata for new files.)
* A lot of other unit test churn relates to (a) default checking on, and
(b) checking on SST open even without DB::Open (e.g. on flush)
* Use `FileMetaData` for more `TableCache` operations (in place of
`FileDescriptor`) so that we have access to the unique_id whenever
we might need to open an SST file. **There is the possibility of
performance impact because we can no longer use the more
localized `fd` part of an `FdWithKeyRange` but instead follow the
`file_metadata` pointer. However, this change (possible regression)
is only done for `GetMemoryUsageByTableReaders`.**
* Removed a completely unnecessary constructor overload of
`TableReaderOptions`
Possible follow-up:
* Verification only happens when opening through table cache. Are there
more places where this should happen?
* Improve error message when there is a file size mismatch vs. manifest
(FIXME added in the appropriate place).
* I'm not sure there's a justification for `FileDescriptor` to be distinct from
`FileMetaData`.
* I'm skeptical that `FdWithKeyRange` really still makes sense for
optimizing some data locality by duplicating some data in memory, but I
could be wrong.
* An unnecessary overload of NewTableReader was recently added, in
the public API nonetheless (though unusable there). It should be cleaned
up to put most things under `TableReaderOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532
Test Plan:
updated unit tests
Performance test showing no significant difference (just noise I think):
`./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000`
Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec
After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec
Reviewed By: jay-zhuang
Differential Revision: D38765551
Pulled By: pdillinger
fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
Summary:
**Summary:**
When a block is firstly `Lookup` from the secondary cache, we just insert a dummy block in the primary cache (charging the actual size of the block) and don’t erase the block from the secondary cache. A standalone handle is returned from `Lookup`. Only if the block is hit again, we erase it from the secondary cache and add it into the primary cache.
When a block is firstly evicted from the primary cache to the secondary cache, we just insert a dummy block (size 0) in the secondary cache. When the block is evicted again, it is treated as a hot block and is inserted into the secondary cache.
**Implementation Details**
Add a new state of LRUHandle: The handle is never inserted into the LRUCache (both hash table and LRU list) and it doesn't experience the above three states. The entry can be freed when refs becomes 0. (refs >= 1 && in_cache == false && IS_STANDALONE == true)
The behaviors of `LRUCacheShard::Lookup()` are updated if the secondary_cache is CompressedSecondaryCache:
1. If a handle is found in primary cache:
1.1. If the handle's value is not nullptr, it is returned immediately.
1.2. If the handle's value is nullptr, this means the handle is a dummy one. For a dummy handle, if it was retrieved from secondary cache, it may still exist in secondary cache.
- 1.2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
- 1.2.2. If the handle from secondary cache is valid, erase it from the secondary cache and add it into the primary cache.
2. If a handle is not found in primary cache:
2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
2.2. If the handle from secondary cache is valid, insert a dummy block in the primary cache (charging the actual size of the block) and return a standalone handle.
The behaviors of `LRUCacheShard::Promote()` are updated as follows:
1. If `e->sec_handle` has value, one of the following steps can happen:
1.1. Insert a dummy handle and return a standalone handle to caller when `secondary_cache_` is `CompressedSecondaryCache` and e is a standalone handle.
1.2. Insert the item into the primary cache and return the handle to caller.
1.3. Exception handling.
3. If `e->sec_handle` has no value, mark the item as not in cache and charge the cache as its only metadata that'll shortly be released.
The behavior of `CompressedSecondaryCache::Insert()` is updated:
1. If a block is evicted from the primary cache for the first time, a dummy item is inserted.
4. If a dummy item is found for a block, the block is inserted into the secondary cache.
The behavior of `CompressedSecondaryCache:::Lookup()` is updated:
1. If a handle is not found or it is a dummy item, a nullptr is returned.
2. If `erase_handle` is true, the handle is erased.
The behaviors of `LRUCacheShard::Release()` are adjusted for the standalone handles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10527
Test Plan:
1. stress tests.
5. unit tests.
6. CPU profiling for db_bench.
Reviewed By: siying
Differential Revision: D38747613
Pulled By: gitbw95
fbshipit-source-id: 74a1eba7e1957c9affb2bd2ae3e0194584fa6eca
Summary:
Example failure:
```
db/blob/db_blob_basic_test.cc:226: Failure
Expected equality of these values:
i
Which is: 1
num_blobs
Which is: 5
```
I can't repro locally, but it looks like the 2KB cache is too small to guarantee no eviction happens between loading all the data into cache and reading from `kBlockCacheTier`. This 2KB setting appears to have come from a test where the cached entries are pinned, where it makes sense to have a small setting. However, such a small setting makes less sense when the blocks are evictable but must remain cached per the test's expectation. This PR increases the capacity setting to 2MB for those cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10636
Reviewed By: cbi42
Differential Revision: D39250976
Pulled By: ajkr
fbshipit-source-id: 769309f9a19cfac20b67b927805c8df5c1d2d1f5
Summary:
Example flake: https://app.circleci.com/pipelines/github/facebook/rocksdb/17660/workflows/7a891875-f07b-4a67-b204-eaa7ca9f9aa2/jobs/467496
The test could get stuck in out-of-space due to a callback executing `SetFilesystemActive(false /* active */)` after the test executed `SetFilesystemActive(true /* active */)`. This could happen because background info logging went through the SyncPoint callback "WritableFileWriter::Append:BeforePrepareWrite", probably unintentionally. The solution of this PR is to call `ClearAllCallBacks()` to wait for any such pending callbacks to drain before calling `SetFilesystemActive(true /* active */)`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10642
Reviewed By: cbi42
Differential Revision: D39265381
Pulled By: ajkr
fbshipit-source-id: 9a2f4916ab19726c8fb4b3a3b590b1b9ed93de1b
Summary:
Example flake where CircleCI reports memory at 99% and process gets killed with signal 9 (likely OOM): https://app.circleci.com/pipelines/github/facebook/rocksdb/18085/workflows/bdadbfe6-c40f-4ccb-a5db-fc8c4036f20a/jobs/475628
The previous settings of max_key=25000000, column_families=10, and log2_keys_per_lock=2 resulted in 3GB memory usage just for SharedState. The locks alone consume at least (25000000 keys per CF) * (10 CFs) / (2^2 keys per lock) * (40 bytes per lock) = 2.3GB. This PR reduces it 10x by reducing max_key by that factor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10639
Reviewed By: cbi42
Differential Revision: D39263804
Pulled By: ajkr
fbshipit-source-id: 9b5565bbafcb21a2f5b487c8364808dea2f0bc0c
Summary:
Previously, automatic compaction could be triggered prior to the test invoking CompactRange(). It could lead to the following flaky failure:
```
/root/project/db/db_block_cache_test.cc:753: Failure
Expected equality of these values:
1 + kNumBlocks
Which is: 11
options.statistics->getTickerCount(BLOCK_CACHE_INDEX_ADD)
Which is: 10
```
A sequence leading to this failure was:
* Automatic compaction
* files [1] [2] trivially moved
* files [3] [4] [5] [6] trivially moved
* CompactRange()
* files [7] [8] [9] trivially moved
* file [10] trivially moved
In such a case, the index/filter block adds that the test expected did not happen since there were no new files.
This PR just tweaks settings to ensure the `CompactRange()` produces one new file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10635
Reviewed By: cbi42
Differential Revision: D39250869
Pulled By: ajkr
fbshipit-source-id: a3c94c49069e28c49c40b4b80dae0059739d19fd
Summary:
Delete range logic is moved from `DBIter` to `MergingIterator`, and `MergingIterator` will seek to the end of a range deletion if possible instead of scanning through each key and check with `RangeDelAggregator`.
With the invariant that a key in level L (consider memtable as the first level, each immutable and L0 as a separate level) has a larger sequence number than all keys in any level >L, a range tombstone `[start, end)` from level L covers all keys in its range in any level >L. This property motivates optimizations in iterator:
- in `Seek(target)`, if level L has a range tombstone `[start, end)` that covers `target.UserKey`, then for all levels > L, we can do Seek() on `end` instead of `target` to skip some range tombstone covered keys.
- in `Next()/Prev()`, if the current key is covered by a range tombstone `[start, end)` from level L, we can do `Seek` to `end` for all levels > L.
This PR implements the above optimizations in `MergingIterator`. As all range tombstone covered keys are now skipped in `MergingIterator`, the range tombstone logic is removed from `DBIter`. The idea in this PR is similar to https://github.com/facebook/rocksdb/issues/7317, but this PR leaves `InternalIterator` interface mostly unchanged. **Credit**: the cascading seek optimization and the sentinel key (discussed below) are inspired by [Pebble](https://github.com/cockroachdb/pebble/blob/master/merging_iter.go) and suggested by ajkr in https://github.com/facebook/rocksdb/issues/7317. The two optimizations are mostly implemented in `SeekImpl()/SeekForPrevImpl()` and `IsNextDeleted()/IsPrevDeleted()` in `merging_iterator.cc`. See comments for each method for more detail.
One notable change is that the minHeap/maxHeap used by `MergingIterator` now contains range tombstone end keys besides point key iterators. This helps to reduce the number of key comparisons. For example, for a range tombstone `[start, end)`, a `start` and an `end` `HeapItem` are inserted into the heap. When a `HeapItem` for range tombstone start key is popped from the minHeap, we know this range tombstone becomes "active" in the sense that, before the range tombstone's end key is popped from the minHeap, all the keys popped from this heap is covered by the range tombstone's internal key range `[start, end)`.
Another major change, *delete range sentinel key*, is made to `LevelIterator`. Before this PR, when all point keys in an SST file are iterated through in `MergingIterator`, a level iterator would advance to the next SST file in its level. In the case when an SST file has a range tombstone that covers keys beyond the SST file's last point key, advancing to the next SST file would lose this range tombstone. Consequently, `MergingIterator` could return keys that should have been deleted by some range tombstone. We prevent this by pretending that file boundaries in each SST file are sentinel keys. A `LevelIterator` now only advance the file iterator once the sentinel key is processed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10449
Test Plan:
- Added many unit tests in db_range_del_test
- Stress test: `./db_stress --readpercent=5 --prefixpercent=19 --writepercent=20 -delpercent=10 --iterpercent=44 --delrangepercent=2`
- Additional iterator stress test is added to verify against iterators against expected state: https://github.com/facebook/rocksdb/issues/10538. This is based on ajkr's previous attempt https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913.
```
python3 ./tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --compression_type=none --max_background_compactions=8 --value_size_mult=33 --max_key=5000000 --interval=10 --duration=7200 --delrangepercent=3 --delpercent=9 --iterpercent=25 --writepercent=60 --readpercent=3 --prefixpercent=0 --num_iterations=1000 --range_deletion_width=100 --verify_iterator_with_expected_state_one_in=1
```
- Performance benchmark: I used a similar setup as in the blog [post](http://rocksdb.org/blog/2018/11/21/delete-range.html) that introduced DeleteRange, "a database with 5 million data keys, and 10000 range tombstones (ignoring those dropped during compaction) that were written in regular intervals after 4.5 million data keys were written". As expected, the performance with this PR depends on the range tombstone width.
```
# Setup:
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=fillrandom --writes=4500000 --num=5000000
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=overwrite --writes=500000 --num=5000000 --use_existing_db=true --writes_per_range_tombstone=50
# Scan entire DB
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=readseq[-X5] --use_existing_db=true --num=5000000 --disable_auto_compactions=true
# Short range scan (10 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=100000 --seek_nexts=10 --disable_auto_compactions=true
# Long range scan(1000 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=2500 --seek_nexts=1000 --disable_auto_compactions=true
```
Avg over of 10 runs (some slower tests had fews runs):
For the first column (tombstone), 0 means no range tombstone, 100-10000 means width of the 10k range tombstones, and 1 means there is a single range tombstone in the entire DB (width is 1000). The 1 tombstone case is to test regression when there's very few range tombstones in the DB, as no range tombstone is likely to take a different code path than with range tombstones.
- Scan entire DB
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2525600 (± 43564) |2486917 (± 33698) |-1.53% |
| 100 |1853835 (± 24736) |2073884 (± 32176) |+11.87% |
| 1000 |422415 (± 7466) |1115801 (± 22781) |+164.15% |
| 10000 |22384 (± 227) |227919 (± 6647) |+918.22% |
| 1 range tombstone |2176540 (± 39050) |2434954 (± 24563) |+11.87% |
- Short range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |35398 (± 533) |35338 (± 569) |-0.17% |
| 100 |28276 (± 664) |31684 (± 331) |+12.05% |
| 1000 |7637 (± 77) |25422 (± 277) |+232.88% |
| 10000 |1367 |28667 |+1997.07% |
| 1 range tombstone |32618 (± 581) |32748 (± 506) |+0.4% |
- Long range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2262 (± 33) |2353 (± 20) |+4.02% |
| 100 |1696 (± 26) |1926 (± 18) |+13.56% |
| 1000 |410 (± 6) |1255 (± 29) |+206.1% |
| 10000 |25 |414 |+1556.0% |
| 1 range tombstone |1957 (± 30) |2185 (± 44) |+11.65% |
- Microbench does not show significant regression: https://gist.github.com/cbi42/59f280f85a59b678e7e5d8561e693b61
Reviewed By: ajkr
Differential Revision: D38450331
Pulled By: cbi42
fbshipit-source-id: b5ef12e8d8c289ed2e163ccdf277f5039b511fca
Summary:
Appears possible after 5de98f2 introduced possible lost
updates. Could be related to 2af132c also. Simply ensure no sqrt of
negative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10586
Test Plan: test added
Reviewed By: ajkr
Differential Revision: D39068391
Pulled By: pdillinger
fbshipit-source-id: 230b214a41e6c9ae91a1ef3e8b2a17b46bbb17c2
Summary:
... because we are frequently seeing the 10m "no output"
timeouts on these
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10627
Test Plan: CI
Reviewed By: hx235
Differential Revision: D39224922
Pulled By: pdillinger
fbshipit-source-id: f54c7adb5de87b2f57ccbc7f4e6c541b9cd37e08
Summary:
With the current code, when a blob isn't found in the cache and gets read
from the blob file and then inserted into the cache, the application gets
passed the self-contained `PinnableSlice` resulting from the blob file read.
The patch changes this so that the `PinnableSlice` pins the cache entry
instead in this case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10625
Test Plan: `make check`
Reviewed By: pdillinger
Differential Revision: D39220904
Pulled By: ltamasi
fbshipit-source-id: cb9c62881e3523b1e9f614e00bf503bac2fe3b0a
Summary:
RocksDB does auto-readahead for iterators on noticing more
than two reads for a table file if user doesn't provide readahead_size and reads are sequential.
A new option num_file_reads_for_auto_readahead is added which can be
configured and indicates after how many sequential reads prefetching should
be start.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10556
Test Plan: Existing and new unit test
Reviewed By: anand1976
Differential Revision: D38947147
Pulled By: akankshamahajan15
fbshipit-source-id: c9eeab495f84a8df7f701c42f04894e46440ad97
Summary:
This stat was only getting updated in the async (coroutine) version of MultiGet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10622
Reviewed By: akankshamahajan15
Differential Revision: D39188790
Pulled By: anand1976
fbshipit-source-id: 7e231507f65fc94c8a006c38f79dfba182a2c24a
Summary:
sanity check value for option `memtable_protection_bytes_per_key` in `ColumnFamilyData::ValidateOptions()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10621
Test Plan: `make check`, added unit test in ColumnFamilyTest.
Reviewed By: ajkr
Differential Revision: D39180133
Pulled By: cbi42
fbshipit-source-id: 009e0da3ccb332d1c9e14d20193304610bd4eb8a
Summary:
**Context/Summary:**
`ExpectedState` is not aware of transaction-related concept so `use_txn=1 ` is not compatible with `sync_fault_injection=1`. Therefore this PR disabled this combination until we expand our correctness testing to transaction related features.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10605
Test Plan:
- Run the following commands to verify `--use_txn` is correctly sanitized
- `python3 ./tools/db_crashtest.py blackbox --use_txn=1 --sync_fault_injection=1 `
- `python3 ./tools/db_crashtest.py blackbox --use_txn=0 --sync_fault_injection=1 `
Reviewed By: ajkr
Differential Revision: D39121287
Pulled By: hx235
fbshipit-source-id: 7d5d6dd32479ea1c07df4f38322650f3a60def9c
Summary:
Right now, when the option migration tool migrates to FIFO compaction, it compacts all the data into one single SST file and move to L0. Although it creates a valid LSM-tree for FIFO, for any data to be deleted for FIFO, the giant file will be deleted, which might make the DB almost empty. There is not good solution for it, because usually we don't have enough information to reconstruct the FIFO LSM-tree. This change changes to a solution that compromises the FIFO condition. We hope the solution is more useable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10600
Test Plan: Add unit tests for that.
Reviewed By: jay-zhuang
Differential Revision: D39106424
fbshipit-source-id: bdfd852c3b343373765b8d9716fefc08fd27145c
Summary:
Currently, `db_bench` and `db_stress` print the blob cache options even if
a shared block/blob cache is configured, i.e. when they are not actually
in effect. The patch changes this so they are only printed when a separate blob
cache is used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10614
Test Plan: Tested manually using `db_bench` and `db_stress`.
Reviewed By: akankshamahajan15
Differential Revision: D39144603
Pulled By: ltamasi
fbshipit-source-id: f714304c5d46186f8514746c27ee6f52aa3e4af8
Summary:
This should fix an import issue detected in meta internal tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10604
Test Plan: Unit Tests.
Reviewed By: hx235
Differential Revision: D39120414
Pulled By: gitbw95
fbshipit-source-id: dbd016d7f47b9f54aab5ea61e8d3cd79734f46af
Summary:
**Context:**
Below crash test revealed a bug that directory containing CURRENT file (short for `dir_contains_current_file` below) was not always get synced after a new CURRENT is created and being called with `RenameFile` as part of the creation.
This bug exposes a risk that such un-synced directory containing the updated CURRENT can’t survive a host crash (e.g, power loss) hence get corrupted. This then will be followed by a recovery from a corrupted CURRENT that we don't want.
The root-cause is that a nullptr `FSDirectory* dir_contains_current_file` sometimes gets passed-down to `SetCurrentFile()` hence in those case `dir_contains_current_file->FSDirectory::FsyncWithDirOptions()` will be skipped (which otherwise will internally call`Env/FS::SyncDic()` )
```
./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --allow_data_in_errors=True --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=8 --block_size=16384 --bloom_bits=134.8015470676662 --bottommost_compression_type=disable --cache_size=8388608 --checkpoint_one_in=1000000 --checksum_type=kCRC32c --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_ttl=100 --compression_max_dict_buffer_bytes=511 --compression_max_dict_bytes=16384 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=65536 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --expected_values_dir=$exp --fail_if_options_file_error=1 --file_checksum_impl=none --flush_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --ingest_external_file_one_in=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --mark_for_compaction_one_file_in=10 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=16384 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.001 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --mmap_read=1 --nooverwritepercent=1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=5 --prefixpercent=5 --prepopulate_block_cache=1 --progress_reports=0 --read_fault_one_in=1000 --readpercent=45 --recycle_log_file_num=0 --reopen=0 --ribbon_starting_level=999 --secondary_cache_fault_one_in=32 --secondary_cache_uri=compressed_secondary_cache://capacity=8388608 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --subcompactions=3 --sync_fault_injection=1 --target_file_size_base=2097 --target_file_size_multiplier=2 --test_batches_snapshots=1 --top_level_index_pinning=1 --use_full_merge_v1=1 --use_merge=1 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --write_buffer_size=4194 --writepercent=35
```
```
stderr:
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
db_stress: utilities/fault_injection_fs.cc:748: virtual rocksdb::IOStatus rocksdb::FaultInjectionTestFS::RenameFile(const std::string &, const std::string &, const rocksdb::IOOptions &, rocksdb::IODebugContext *): Assertion `tlist.find(tdn.second) == tlist.end()' failed.`
```
**Summary:**
The PR ensured the non-test path pass down a non-null dir containing CURRENT (which is by current RocksDB assumption just db_dir) by doing the following:
- Renamed `directory_to_fsync` as `dir_contains_current_file` in `SetCurrentFile()` to tighten the association between this directory and CURRENT file
- Changed `SetCurrentFile()` API to require `dir_contains_current_file` being passed-in, instead of making it by default nullptr.
- Because `SetCurrentFile()`'s `dir_contains_current_file` is passed down from `VersionSet::LogAndApply()` then `VersionSet::ProcessManifestWrites()` (i.e, think about this as a chain of 3 functions related to MANIFEST update), these 2 functions also got refactored to require `dir_contains_current_file`
- Updated the non-test-path callers of these 3 functions to obtain and pass in non-nullptr `dir_contains_current_file`, which by current assumption of RocksDB, is the `FSDirectory* db_dir`.
- `db_impl` path will obtain `DBImpl::directories_.getDbDir()` while others with no access to such `directories_` are obtained on the fly by creating such object `FileSystem::NewDirectory(..)` and manage it by unique pointers to ensure short life time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10573
Test Plan:
- `make check`
- Passed the repro db_stress command
- For future improvement, since we currently don't assert dir containing CURRENT to be non-nullptr due to https://github.com/facebook/rocksdb/pull/10573#pullrequestreview-1087698899, there is still chances that future developers mistakenly pass down nullptr dir containing CURRENT thus resulting skipped sync dir and cause the bug again. Therefore a smarter test (e.g, such as quoted from ajkr "(make) unsynced data loss to be dropping files corresponding to unsynced directory entries") is still needed.
Reviewed By: ajkr
Differential Revision: D39005886
Pulled By: hx235
fbshipit-source-id: 336fb9090d0cfa6ca3dd580db86268007dde7f5a
Summary:
The patch adds a dedicated cache entry role for blob values and switches
to a registered deleter so that blobs show up as a separate bucket
(as opposed to "Misc") in the cache occupancy statistics, e.g.
```
Block cache entry stats(count,size,portion): DataBlock(133515,531.73 MB,13.6866%) BlobValue(1824855,3.10 GB,81.7071%) Misc(1,0.00 KB,0%)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10601
Test Plan: Ran `make check` and tested the cache occupancy statistics using `db_bench`.
Reviewed By: riversand963
Differential Revision: D39107915
Pulled By: ltamasi
fbshipit-source-id: 8446c3b190a41a144030df73f318eeda4398c125
Summary:
Imported a fix to "rocksdb.prefetched.bytes.discarded" stat from https://github.com/facebook/rocksdb/issues/10561, and added a new stat "rocksdb.async.prefetch.abort.micros" to measure time spent waiting for async reads to abort.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10585
Reviewed By: akankshamahajan15
Differential Revision: D39067000
Pulled By: anand1976
fbshipit-source-id: d7cda71abb48017239bd5fd832345a16c7024faf
Summary:
When verification fails for db_stress, print more information about
value read from the db and expected state.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10587
Test Plan:
make check
./db_stress
Reviewed By: akankshamahajan15, hx235
Differential Revision: D39078511
Pulled By: riversand963
fbshipit-source-id: 77ac8ffae01fc3a9b58a02c2e7bbe141e1a18f0b
Summary:
Some APIs for getting live files, which are used by Checkpoint
and BackupEngine, can optionally trigger and wait for a flush. These
would deadlock when used on a read-only DB. Here we fix that by assuming
the user wants the overall operation to succeed and is OK without
flushing (because the DB is read-only).
Follow-up work: the same or other issues can be hit by directly invoking
some DB functions that are clearly not appropriate for read-only
instance, but are not covered by overrides in DBImplReadOnly and
CompactedDBImpl. These should be fixed to avoid similar problems on
accidental misuse. (Long term, it would be nice to have a DBReadOnly
class without those members, like BackupEngineReadOnly.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10569
Test Plan: tests updated to catch regression (hang before the fix)
Reviewed By: riversand963
Differential Revision: D38995759
Pulled By: pdillinger
fbshipit-source-id: f5f8bc7123e13cb45bd393dd974d7d6eda20bc68
Summary:
https://github.com/facebook/rocksdb/issues/10538 added `TestIterateAgainstExpected()` in `no_batched_ops_test` to verify iterator correctness against the in memory expected state. It is not compatible when run after some other stress tests, e.g. `TestPut()` in `batched_op_stress`, that either do not set expected state when writing to DB or use keys that cannot be parsed by `GetIntVal()`. The assert [here](d17be55aab/db_stress_tool/db_stress_common.h (L520)) could fail. This PR fixed this issue by setting iterator upperbound to `max_key` when `destroy_db_initially=0` to avoid the key space that `batched_op_stress` touches.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10590
Test Plan:
```
# set up DB with batched_op_stress
./db_stress --test_batches_snapshots=1 --verify_iterator_with_expected_state_one_in=1 --max_key_len=3 --max_key=100000000 --skip_verifydb=1 --continuous_verification_interval=0 --writepercent=85 --delpercent=3 --delrangepercent=0 --iterpercent=10 --nooverwritepercent=1 --prefixpercent=0 --readpercent=2 --key_len_percent_dist=1,30,69
# Before this PR, the following test will fail the asserts with error msg like the following
# Assertion failed: (size_key <= key_gen_ctx.weights.size() * sizeof(uint64_t)), function GetIntVal, file db_stress_common.h, line 524.
./db_stress --verify_iterator_with_expected_state_one_in=1 --max_key_len=3 --max_key=100000000 --skip_verifydb=1 --continuous_verification_interval=0 --writepercent=0 --delpercent=3 --delrangepercent=0 --iterpercent=95 --nooverwritepercent=1 --prefixpercent=0 --readpercent=2 --key_len_percent_dist=1,30,69 --destroy_db_initially=0
```
Reviewed By: ajkr
Differential Revision: D39085243
Pulled By: cbi42
fbshipit-source-id: a7dfee2320c330773b623b442d730fd014ec7056
Summary:
FreeBSD doesn't have `JEMALLOC_USABLE_SIZE_CONST` so we need to define
it.
This fixes MariaDB MDEV-20248.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10575
Reviewed By: jay-zhuang
Differential Revision: D39057665
Pulled By: ajkr
fbshipit-source-id: 3874779d12a1dd5036324947f6372e6ad57a7b08
Summary:
The patch improves the bookkeeping around the memory usage of
cached blobs in two ways: 1) it uses `malloc_usable_size`, which accounts
for allocator bin sizes etc., and 2) it also considers the memory usage
of the `BlobContents` object in addition to the blob itself. Note: some unit
tests had been relying on the cache charge being equal to the size of the
cached blob; these were updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10583
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D39060680
Pulled By: ltamasi
fbshipit-source-id: 3583adce2b4ce6e84861f3fadccbfd2e5a3cc482
Summary:
Timer has a limitation that it cannot re-register a task with the same name,
because the cancel only mark the task as invalid and wait for the Timer thread
to clean it up later, before the task is cleaned up, the same task name cannot
be added. Which makes the task option update likely to fail, which basically
cancel and re-register the same task name. Change the periodic task name to a
random unique id and store it in periodic_task_scheduler.
Also refactor the `periodic_work` to `periodic_task` to make each job function
as a `task`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10379
Test Plan: unittests
Reviewed By: ajkr
Differential Revision: D38000615
Pulled By: jay-zhuang
fbshipit-source-id: e4135f9422e3b53aaec8eda54f4e18ce633a279e
Summary:
The patch introduces a new class called `BlobContents`, which represents
a single uncompressed blob value. We currently use `std::string` for this
purpose; `BlobContents` is somewhat smaller but the primary reason for a
dedicated class is that it enables certain improvements and optimizations
like eliding a copy when inserting a blob into the cache, using custom
allocators, or more control over and better accounting of the memory usage
of cached blobs (see https://github.com/facebook/rocksdb/issues/10484).
(We plan to implement these in subsequent PRs.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10571
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D39000965
Pulled By: ltamasi
fbshipit-source-id: f296eddf9dec4fc3e11cad525b462bdf63c78f96
Summary:
As of v6.14 (released in 2020), force_consistency_checks is enabled by default. However, the Java documentation does not seem to have been updated to reflect the change at the time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10574
Reviewed By: hx235
Differential Revision: D39006566
Pulled By: ajkr
fbshipit-source-id: c7b029484d62deaa1f260ec55084049fe39eb84a
Summary:
WAL append and switch can both happen between `FlushWAL(true /* sync */)`'s sync operations and its call to `MarkLogsSynced()`. We permit this since locks need to be released for the sync operations. Such an appended/switched WAL is both inactive and incompletely synced at the time `MarkLogsSynced()` processes it.
Prior to this PR, `MarkLogsSynced()` assumed all inactive WALs were fully synced and removed them from consideration for future syncs. That was wrong in the scenario described above and led to the latest append(s) never being synced. This PR changes `MarkLogsSynced()` to only remove inactive WALs from consideration for which all flushed data has been synced.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10560
Test Plan: repro unit test for the scenario described above. Without this PR, it fails on "key2" not found
Reviewed By: riversand963
Differential Revision: D38957391
Pulled By: ajkr
fbshipit-source-id: da77175eba97ff251a4219b227b3bb2d4843ed26
Summary:
CI benchmarks refine configuration
Run only “essential” benchmarks, but for longer
Fix (reduce) the NUM_KEYS to ensure cached behaviour
Reduce level size to try to ensure more levels
Refine test durations again, more time per test, but fewer tests.
In CI benchmark mode, the only read test is readrandom.
There are still 3 mostly-read tests.
Goal is to squeeze complete run a little bit inside 1 hour so it doesn’t clash with the next run (cron scheduled for main branch), but it gets to run as long as possible, so that results are as credible as possible.
Reduce thread count to physical capacity, in an attempt to reduce throughput variance for write heavy tests. See Mark Callaghan’s comments in related documentation..
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10514
Reviewed By: ajkr
Differential Revision: D38952469
Pulled By: jay-zhuang
fbshipit-source-id: 72fa6bba897cc47066ced65facd1fd36e28f30a8
Summary:
The features that cannot work with disable_wal=1 due to unsynced data dropping (ingest_external_file_one_in and enable_compaction_filter) similarly cannot work with sync_fault_injection=1. This PR prevents those features from being used together with sync_fault_injection=1.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10559
Reviewed By: hx235
Differential Revision: D38953019
Pulled By: ajkr
fbshipit-source-id: 7e2c7644ec84d7323f632cf976bcee00502d0ed7
Summary:
As mentioned in https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913,
`db_stress` does not have much verification for iterator correctness.
It has a `TestIterate()` function, but that is mainly for comparing results
between two iterators, one with `total_order_seek` and the other optionally
sets auto_prefix, upper/lower bounds. Commit 49a0581ad2462e31aa3f768afa769e0d33390f33
added a new `TestIterateAgainstExpected()` function that compares iterator against
expected state. It locks a range of keys, creates an iterator, does
a random sequence of `Next/Prev` and compares against expected state.
This PR is based on that commit, the main changes include some logs
(for easier debugging if a test fails), a forward and backward scan to
cover the entire locked key range, and a flag for optionally turning on
this version of Iterator testing.
Added constraint that the checks against expected state in
`TestIterateAgainstExpected()` and in `TestGet()` are only turned on
when `--skip_verifydb` flag is not set.
Remove the change log introduced in https://github.com/facebook/rocksdb/issues/10553.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10538
Test Plan:
Run `db_stress` with `--verify_iterator_with_expected_state_one_in=1`,
and a large `--iterpercent` and `--num_iterations`. Checked `op_logs`
manually to ensure expected coverage. Tweaked part of the code in
https://github.com/facebook/rocksdb/issues/10449 and stress test was able to catch it.
- internally run various flavor of crash test
Reviewed By: ajkr
Differential Revision: D38847269
Pulled By: cbi42
fbshipit-source-id: 8b4402a9bba9f6cfa08051943cd672579d489599
Summary:
https://github.com/facebook/rocksdb/pull/10489 adds an assertion in most functions in WritableFileWriter to check no previous error. However, it only works without calling SyncWithoutFlush(). The nature of SyncWithoutFlush() makes two concurrent call fails to check status code of each other and causing assertion failure. Fix the problem by skipping the check after SyncWithoutFlush() is called and not check status code in SyncWithoutFlush().
Since the original change was not officially released yet, the fix isn't added to HISTORY.md.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10555
Test Plan: Make sure existing tests still pass
Reviewed By: anand1976
Differential Revision: D38946208
fbshipit-source-id: 63566732d3f25c8a8342840499cf7b7d745f27c2
Summary:
updated `TestGet()` in `no_batched_op_stress` to check the result of `Get()` operations against expected state (`expected_state_manager_`). More specifically, if `Get()` finds a key, expected state should not have `DELETION_SENTINEL` for the same key, and if `Get()` returns NotFound for a key, expected state should not have the key. One intention for this change it to verify correctness of code path change regarding range tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10553
Test Plan: run db_stress with nonzero readpercent: `./db_stress_branch --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`. When I initially used wrong column family in `thread->shared->Get`, the test reported inconsistencies.
Reviewed By: ajkr
Differential Revision: D38927007
Pulled By: cbi42
fbshipit-source-id: f9f61b312ad0b4c21a799329609ba8526169b048
Andrew Kryczka